| /* |
| * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> |
| * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #ifndef __AR7_H__ |
| #define __AR7_H__ |
| |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/errno.h> |
| |
| #include <asm/addrspace.h> |
| |
| #define AR7_SDRAM_BASE 0x14000000 |
| |
| #define AR7_REGS_BASE 0x08610000 |
| |
| #define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000) |
| #define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900) |
| /* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */ |
| #define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00) |
| #define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80) |
| #define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20) |
| #define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00) |
| #define AR7_REGS_USB (AR7_REGS_BASE + 0x1200) |
| #define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600) |
| #define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) |
| #define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00) |
| #define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) |
| #define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00) |
| #define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) |
| #define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800) |
| |
| #define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00) |
| #define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00) |
| #define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00) |
| |
| #define AR7_RESET_PEREPHERIAL 0x0 |
| #define AR7_RESET_SOFTWARE 0x4 |
| #define AR7_RESET_STATUS 0x8 |
| |
| #define AR7_RESET_BIT_CPMAC_LO 17 |
| #define AR7_RESET_BIT_CPMAC_HI 21 |
| #define AR7_RESET_BIT_MDIO 22 |
| #define AR7_RESET_BIT_EPHY 26 |
| |
| /* GPIO control registers */ |
| #define AR7_GPIO_INPUT 0x0 |
| #define AR7_GPIO_OUTPUT 0x4 |
| #define AR7_GPIO_DIR 0x8 |
| #define AR7_GPIO_ENABLE 0xc |
| |
| #define AR7_CHIP_7100 0x18 |
| #define AR7_CHIP_7200 0x2b |
| #define AR7_CHIP_7300 0x05 |
| |
| /* Interrupts */ |
| #define AR7_IRQ_UART0 15 |
| #define AR7_IRQ_UART1 16 |
| |
| /* Clocks */ |
| #define AR7_AFE_CLOCK 35328000 |
| #define AR7_REF_CLOCK 25000000 |
| #define AR7_XTAL_CLOCK 24000000 |
| |
| /* DCL */ |
| #define AR7_WDT_HW_ENA 0x10 |
| |
| struct plat_cpmac_data { |
| int reset_bit; |
| int power_bit; |
| u32 phy_mask; |
| char dev_addr[6]; |
| }; |
| |
| struct plat_dsl_data { |
| int reset_bit_dsl; |
| int reset_bit_sar; |
| }; |
| |
| extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock; |
| |
| static inline u16 ar7_chip_id(void) |
| { |
| return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff; |
| } |
| |
| static inline u8 ar7_chip_rev(void) |
| { |
| return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff; |
| } |
| |
| static inline int ar7_cpu_freq(void) |
| { |
| return ar7_cpu_clock; |
| } |
| |
| static inline int ar7_bus_freq(void) |
| { |
| return ar7_bus_clock; |
| } |
| |
| static inline int ar7_vbus_freq(void) |
| { |
| return ar7_bus_clock / 2; |
| } |
| #define ar7_cpmac_freq ar7_vbus_freq |
| |
| static inline int ar7_dsp_freq(void) |
| { |
| return ar7_dsp_clock; |
| } |
| |
| static inline int ar7_has_high_cpmac(void) |
| { |
| u16 chip_id = ar7_chip_id(); |
| switch (chip_id) { |
| case AR7_CHIP_7100: |
| case AR7_CHIP_7200: |
| return 0; |
| case AR7_CHIP_7300: |
| return 1; |
| default: |
| return -ENXIO; |
| } |
| } |
| #define ar7_has_high_vlynq ar7_has_high_cpmac |
| #define ar7_has_second_uart ar7_has_high_cpmac |
| |
| static inline void ar7_device_enable(u32 bit) |
| { |
| void *reset_reg = |
| (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); |
| writel(readl(reset_reg) | (1 << bit), reset_reg); |
| msleep(20); |
| } |
| |
| static inline void ar7_device_disable(u32 bit) |
| { |
| void *reset_reg = |
| (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); |
| writel(readl(reset_reg) & ~(1 << bit), reset_reg); |
| msleep(20); |
| } |
| |
| static inline void ar7_device_reset(u32 bit) |
| { |
| ar7_device_disable(bit); |
| ar7_device_enable(bit); |
| } |
| |
| static inline void ar7_device_on(u32 bit) |
| { |
| void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); |
| writel(readl(power_reg) | (1 << bit), power_reg); |
| msleep(20); |
| } |
| |
| static inline void ar7_device_off(u32 bit) |
| { |
| void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); |
| writel(readl(power_reg) & ~(1 << bit), power_reg); |
| msleep(20); |
| } |
| |
| #endif /* __AR7_H__ */ |