arch/mips/include/asm/irqflags.h - kernel/prism - Git at Google

 /*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
  * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
  * Copyright (C) 1996 by Paul M. Antoine
  * Copyright (C) 1999 Silicon Graphics
  * Copyright (C) 2000 MIPS Technologies, Inc.
  */
 #ifndef _ASM_IRQFLAGS_H
 #define _ASM_IRQFLAGS_H

 #ifndef __ASSEMBLY__

 #include <linux/compiler.h>
 #include <asm/hazards.h>

 __asm__(
 	"	.macro	raw_local_irq_enable				\n"
 	"	.set	push						\n"
 	"	.set	reorder						\n"
 	"	.set	noat						\n"
 #ifdef CONFIG_MIPS_MT_SMTC
 	"	mfc0	$1, $2, 1	# SMTC - clear TCStatus.IXMT	\n"
 	"	ori	$1, 0x400					\n"
 	"	xori	$1, 0x400					\n"
 	"	mtc0	$1, $2, 1					\n"
 #elif defined(CONFIG_CPU_MIPSR2)
 	"	ei							\n"
 #else
 	"	mfc0	$1,$12						\n"
 	"	ori	$1,0x1f						\n"
 	"	xori	$1,0x1e						\n"
 	"	mtc0	$1,$12						\n"
 #endif
 	"	irq_enable_hazard					\n"
 	"	.set	pop						\n"
 	"	.endm");

 extern void smtc_ipi_replay(void);

 static inline void raw_local_irq_enable(void)
 {
 #ifdef CONFIG_MIPS_MT_SMTC
 	/*
 	 * SMTC kernel needs to do a software replay of queued
 	 * IPIs, at the cost of call overhead on each local_irq_enable()
 	 */
 	smtc_ipi_replay();
 #endif
 	__asm__ __volatile__(
 		"raw_local_irq_enable"
 		: /* no outputs */
 		: /* no inputs */
 		: "memory");
 }


 /*
  * For cli() we have to insert nops to make sure that the new value
  * has actually arrived in the status register before the end of this
  * macro.
  * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
  * no nops at all.
  */
 /*
  * For TX49, operating only IE bit is not enough.
  *
  * If mfc0 $12 follows store and the mfc0 is last instruction of a
  * page and fetching the next instruction causes TLB miss, the result
  * of the mfc0 might wrongly contain EXL bit.
  *
  * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
  *
  * Workaround: mask EXL bit of the result or place a nop before mfc0.
  */
 __asm__(
 	"	.macro	raw_local_irq_disable\n"
 	"	.set	push						\n"
 	"	.set	noat						\n"
 #ifdef CONFIG_MIPS_MT_SMTC
 	"	mfc0	$1, $2, 1					\n"
 	"	ori	$1, 0x400					\n"
 	"	.set	noreorder					\n"
 	"	mtc0	$1, $2, 1					\n"
 #elif defined(CONFIG_CPU_MIPSR2)
 	"	di							\n"
 #else
 	"	mfc0	$1,$12						\n"
 	"	ori	$1,0x1f						\n"
 	"	xori	$1,0x1f						\n"
 	"	.set	noreorder					\n"
 	"	mtc0	$1,$12						\n"
 #endif
 	"	irq_disable_hazard					\n"
 	"	.set	pop						\n"
 	"	.endm							\n");

 static inline void raw_local_irq_disable(void)
 {
 	__asm__ __volatile__(
 		"raw_local_irq_disable"
 		: /* no outputs */
 		: /* no inputs */
 		: "memory");
 }

 __asm__(
 	"	.macro	raw_local_save_flags flags			\n"
 	"	.set	push						\n"
 	"	.set	reorder						\n"
 #ifdef CONFIG_MIPS_MT_SMTC
 	"	mfc0	\\flags, $2, 1					\n"
 #else
 	"	mfc0	\\flags, $12					\n"
 #endif
 	"	.set	pop						\n"
 	"	.endm							\n");

 #define raw_local_save_flags(x)						\
 __asm__ __volatile__(							\
 	"raw_local_save_flags %0"					\
 	: "=r" (x))

 __asm__(
 	"	.macro	raw_local_irq_save result			\n"
 	"	.set	push						\n"
 	"	.set	reorder						\n"
 	"	.set	noat						\n"
 #ifdef CONFIG_MIPS_MT_SMTC
 	"	mfc0	\\result, $2, 1					\n"
 	"	ori	$1, \\result, 0x400				\n"
 	"	.set	noreorder					\n"
 	"	mtc0	$1, $2, 1					\n"
 	"	andi	\\result, \\result, 0x400			\n"
 #elif defined(CONFIG_CPU_MIPSR2)
 	"	di	\\result					\n"
 	"	andi	\\result, 1					\n"
 #else
 	"	mfc0	\\result, $12					\n"
 	"	ori	$1, \\result, 0x1f				\n"
 	"	xori	$1, 0x1f					\n"
 	"	.set	noreorder					\n"
 	"	mtc0	$1, $12						\n"
 #endif
 	"	irq_disable_hazard					\n"
 	"	.set	pop						\n"
 	"	.endm							\n");

 #define raw_local_irq_save(x)						\
 __asm__ __volatile__(							\
 	"raw_local_irq_save\t%0"					\
 	: "=r" (x)							\
 	: /* no inputs */						\
 	: "memory")

 __asm__(
 	"	.macro	raw_local_irq_restore flags			\n"
 	"	.set	push						\n"
 	"	.set	noreorder					\n"
 	"	.set	noat						\n"
 #ifdef CONFIG_MIPS_MT_SMTC
 	"mfc0	$1, $2, 1						\n"
 	"andi	\\flags, 0x400						\n"
 	"ori	$1, 0x400						\n"
 	"xori	$1, 0x400						\n"
 	"or	\\flags, $1						\n"
 	"mtc0	\\flags, $2, 1						\n"
 #elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
 	/*
 	 * Slow, but doesn't suffer from a relativly unlikely race
 	 * condition we're having since days 1.
 	 */
 	"	beqz	\\flags, 1f					\n"
 	"	 di							\n"
 	"	ei							\n"
 	"1:								\n"
 #elif defined(CONFIG_CPU_MIPSR2)
 	/*
 	 * Fast, dangerous.  Life is fun, life is good.
 	 */
 	"	mfc0	$1, $12						\n"
 	"	ins	$1, \\flags, 0, 1				\n"
 	"	mtc0	$1, $12						\n"
 #else
 	"	mfc0	$1, $12						\n"
 	"	andi	\\flags, 1					\n"
 	"	ori	$1, 0x1f					\n"
 	"	xori	$1, 0x1f					\n"
 	"	or	\\flags, $1					\n"
 	"	mtc0	\\flags, $12					\n"
 #endif
 	"	irq_disable_hazard					\n"
 	"	.set	pop						\n"
 	"	.endm							\n");


 static inline void raw_local_irq_restore(unsigned long flags)
 {
 	unsigned long __tmp1;

 #ifdef CONFIG_MIPS_MT_SMTC
 	/*
 	 * SMTC kernel needs to do a software replay of queued
 	 * IPIs, at the cost of branch and call overhead on each
 	 * local_irq_restore()
 	 */
 	if (unlikely(!(flags & 0x0400)))
 		smtc_ipi_replay();
 #endif

 	__asm__ __volatile__(
 		"raw_local_irq_restore\t%0"
 		: "=r" (__tmp1)
 		: "0" (flags)
 		: "memory");
 }

 static inline void __raw_local_irq_restore(unsigned long flags)
 {
 	unsigned long __tmp1;

 	__asm__ __volatile__(
 		"raw_local_irq_restore\t%0"
 		: "=r" (__tmp1)
 		: "0" (flags)
 		: "memory");
 }

 static inline int raw_irqs_disabled_flags(unsigned long flags)
 {
 #ifdef CONFIG_MIPS_MT_SMTC
 	/*
 	 * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
 	 */
 	return flags & 0x400;
 #else
 	return !(flags & 1);
 #endif
 }

 #endif

 /*
  * Do the CPU's IRQ-state tracing from assembly code.
  */
 #ifdef CONFIG_TRACE_IRQFLAGS
 /* Reload some registers clobbered by trace_hardirqs_on */
 #ifdef CONFIG_64BIT
 # define TRACE_IRQS_RELOAD_REGS						\
 	LONG_L	$11, PT_R11(sp);					\
 	LONG_L	$10, PT_R10(sp);					\
 	LONG_L	$9, PT_R9(sp);						\
 	LONG_L	$8, PT_R8(sp);						\
 	LONG_L	$7, PT_R7(sp);						\
 	LONG_L	$6, PT_R6(sp);						\
 	LONG_L	$5, PT_R5(sp);						\
 	LONG_L	$4, PT_R4(sp);						\
 	LONG_L	$2, PT_R2(sp)
 #else
 # define TRACE_IRQS_RELOAD_REGS						\
 	LONG_L	$7, PT_R7(sp);						\
 	LONG_L	$6, PT_R6(sp);						\
 	LONG_L	$5, PT_R5(sp);						\
 	LONG_L	$4, PT_R4(sp);						\
 	LONG_L	$2, PT_R2(sp)
 #endif
 # define TRACE_IRQS_ON							\
 	CLI;	/* make sure trace_hardirqs_on() is called in kernel level */ \
 	jal	trace_hardirqs_on
 # define TRACE_IRQS_ON_RELOAD						\
 	TRACE_IRQS_ON;							\
 	TRACE_IRQS_RELOAD_REGS
 # define TRACE_IRQS_OFF							\
 	jal	trace_hardirqs_off
 #else
 # define TRACE_IRQS_ON
 # define TRACE_IRQS_ON_RELOAD
 # define TRACE_IRQS_OFF
 #endif

 #endif /* _ASM_IRQFLAGS_H */
	/*
	* This file is subject to the terms and conditions of the GNU General Public
	* License. See the file "COPYING" in the main directory of this archive
	* for more details.
	*
	* Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
	* Copyright (C) 1996 by Paul M. Antoine
	* Copyright (C) 1999 Silicon Graphics
	* Copyright (C) 2000 MIPS Technologies, Inc.
	*/
	#ifndef _ASM_IRQFLAGS_H
	#define _ASM_IRQFLAGS_H

	#ifndef __ASSEMBLY__

	#include <linux/compiler.h>
	#include <asm/hazards.h>

	__asm__(
	" .macro raw_local_irq_enable \n"
	" .set push \n"
	" .set reorder \n"
	" .set noat \n"
	#ifdef CONFIG_MIPS_MT_SMTC
	" mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n"
	" ori $1, 0x400 \n"
	" xori $1, 0x400 \n"
	" mtc0 $1, $2, 1 \n"
	#elif defined(CONFIG_CPU_MIPSR2)
	" ei \n"
	#else
	" mfc0 $1,$12 \n"
	" ori $1,0x1f \n"
	" xori $1,0x1e \n"
	" mtc0 $1,$12 \n"
	#endif
	" irq_enable_hazard \n"
	" .set pop \n"
	" .endm");

	extern void smtc_ipi_replay(void);

	static inline void raw_local_irq_enable(void)
	{
	#ifdef CONFIG_MIPS_MT_SMTC
	/*
	* SMTC kernel needs to do a software replay of queued
	* IPIs, at the cost of call overhead on each local_irq_enable()
	*/
	smtc_ipi_replay();
	#endif
	__asm__ __volatile__(
	"raw_local_irq_enable"
	: /* no outputs */
	: /* no inputs */
	: "memory");
	}


	/*
	* For cli() we have to insert nops to make sure that the new value
	* has actually arrived in the status register before the end of this
	* macro.
	* R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
	* no nops at all.
	*/
	/*
	* For TX49, operating only IE bit is not enough.
	*
	* If mfc0 $12 follows store and the mfc0 is last instruction of a
	* page and fetching the next instruction causes TLB miss, the result
	* of the mfc0 might wrongly contain EXL bit.
	*
	* ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
	*
	* Workaround: mask EXL bit of the result or place a nop before mfc0.
	*/
	__asm__(
	" .macro raw_local_irq_disable\n"
	" .set push \n"
	" .set noat \n"
	#ifdef CONFIG_MIPS_MT_SMTC
	" mfc0 $1, $2, 1 \n"
	" ori $1, 0x400 \n"
	" .set noreorder \n"
	" mtc0 $1, $2, 1 \n"
	#elif defined(CONFIG_CPU_MIPSR2)
	" di \n"
	#else
	" mfc0 $1,$12 \n"
	" ori $1,0x1f \n"
	" xori $1,0x1f \n"
	" .set noreorder \n"
	" mtc0 $1,$12 \n"
	#endif
	" irq_disable_hazard \n"
	" .set pop \n"
	" .endm \n");

	static inline void raw_local_irq_disable(void)
	{
	__asm__ __volatile__(
	"raw_local_irq_disable"
	: /* no outputs */
	: /* no inputs */
	: "memory");
	}

	__asm__(
	" .macro raw_local_save_flags flags \n"
	" .set push \n"
	" .set reorder \n"
	#ifdef CONFIG_MIPS_MT_SMTC
	" mfc0 \\flags, $2, 1 \n"
	#else
	" mfc0 \\flags, $12 \n"
	#endif
	" .set pop \n"
	" .endm \n");

	#define raw_local_save_flags(x) \
	__asm__ __volatile__( \
	"raw_local_save_flags %0" \
	: "=r" (x))

	__asm__(
	" .macro raw_local_irq_save result \n"
	" .set push \n"
	" .set reorder \n"
	" .set noat \n"
	#ifdef CONFIG_MIPS_MT_SMTC
	" mfc0 \\result, $2, 1 \n"
	" ori $1, \\result, 0x400 \n"
	" .set noreorder \n"
	" mtc0 $1, $2, 1 \n"
	" andi \\result, \\result, 0x400 \n"
	#elif defined(CONFIG_CPU_MIPSR2)
	" di \\result \n"
	" andi \\result, 1 \n"
	#else
	" mfc0 \\result, $12 \n"
	" ori $1, \\result, 0x1f \n"
	" xori $1, 0x1f \n"
	" .set noreorder \n"
	" mtc0 $1, $12 \n"
	#endif
	" irq_disable_hazard \n"
	" .set pop \n"
	" .endm \n");

	#define raw_local_irq_save(x) \
	__asm__ __volatile__( \
	"raw_local_irq_save\t%0" \
	: "=r" (x) \
	: /* no inputs */ \
	: "memory")

	__asm__(
	" .macro raw_local_irq_restore flags \n"
	" .set push \n"
	" .set noreorder \n"
	" .set noat \n"
	#ifdef CONFIG_MIPS_MT_SMTC
	"mfc0 $1, $2, 1 \n"
	"andi \\flags, 0x400 \n"
	"ori $1, 0x400 \n"
	"xori $1, 0x400 \n"
	"or \\flags, $1 \n"
	"mtc0 \\flags, $2, 1 \n"
	#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
	/*
	* Slow, but doesn't suffer from a relativly unlikely race
	* condition we're having since days 1.
	*/
	" beqz \\flags, 1f \n"
	" di \n"
	" ei \n"
	"1: \n"
	#elif defined(CONFIG_CPU_MIPSR2)
	/*
	* Fast, dangerous. Life is fun, life is good.
	*/
	" mfc0 $1, $12 \n"
	" ins $1, \\flags, 0, 1 \n"
	" mtc0 $1, $12 \n"
	#else
	" mfc0 $1, $12 \n"
	" andi \\flags, 1 \n"
	" ori $1, 0x1f \n"
	" xori $1, 0x1f \n"
	" or \\flags, $1 \n"
	" mtc0 \\flags, $12 \n"
	#endif
	" irq_disable_hazard \n"
	" .set pop \n"
	" .endm \n");


	static inline void raw_local_irq_restore(unsigned long flags)
	{
	unsigned long __tmp1;

	#ifdef CONFIG_MIPS_MT_SMTC
	/*
	* SMTC kernel needs to do a software replay of queued
	* IPIs, at the cost of branch and call overhead on each
	* local_irq_restore()
	*/
	if (unlikely(!(flags & 0x0400)))
	smtc_ipi_replay();
	#endif

	__asm__ __volatile__(
	"raw_local_irq_restore\t%0"
	: "=r" (__tmp1)
	: "0" (flags)
	: "memory");
	}

	static inline void __raw_local_irq_restore(unsigned long flags)
	{
	unsigned long __tmp1;

	__asm__ __volatile__(
	"raw_local_irq_restore\t%0"
	: "=r" (__tmp1)
	: "0" (flags)
	: "memory");
	}

	static inline int raw_irqs_disabled_flags(unsigned long flags)
	{
	#ifdef CONFIG_MIPS_MT_SMTC
	/*
	* SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
	*/
	return flags & 0x400;
	#else
	return !(flags & 1);
	#endif
	}

	#endif

	/*
	* Do the CPU's IRQ-state tracing from assembly code.
	*/
	#ifdef CONFIG_TRACE_IRQFLAGS
	/* Reload some registers clobbered by trace_hardirqs_on */
	#ifdef CONFIG_64BIT
	# define TRACE_IRQS_RELOAD_REGS \
	LONG_L $11, PT_R11(sp); \
	LONG_L $10, PT_R10(sp); \
	LONG_L $9, PT_R9(sp); \
	LONG_L $8, PT_R8(sp); \
	LONG_L $7, PT_R7(sp); \
	LONG_L $6, PT_R6(sp); \
	LONG_L $5, PT_R5(sp); \
	LONG_L $4, PT_R4(sp); \
	LONG_L $2, PT_R2(sp)
	#else
	# define TRACE_IRQS_RELOAD_REGS \
	LONG_L $7, PT_R7(sp); \
	LONG_L $6, PT_R6(sp); \
	LONG_L $5, PT_R5(sp); \
	LONG_L $4, PT_R4(sp); \
	LONG_L $2, PT_R2(sp)
	#endif
	# define TRACE_IRQS_ON \
	CLI; /* make sure trace_hardirqs_on() is called in kernel level */ \
	jal trace_hardirqs_on
	# define TRACE_IRQS_ON_RELOAD \
	TRACE_IRQS_ON; \
	TRACE_IRQS_RELOAD_REGS
	# define TRACE_IRQS_OFF \
	jal trace_hardirqs_off
	#else
	# define TRACE_IRQS_ON
	# define TRACE_IRQS_ON_RELOAD
	# define TRACE_IRQS_OFF
	#endif

	#endif /* _ASM_IRQFLAGS_H */