| /* |
| * arch/arm/mach-at91/at91cap9.c |
| * |
| * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> |
| * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> |
| * Copyright (C) 2007 Atmel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/pm.h> |
| |
| #include <asm/irq.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| |
| #include <mach/cpu.h> |
| #include <mach/at91cap9.h> |
| #include <mach/at91_pmc.h> |
| #include <mach/at91_rstc.h> |
| #include <mach/at91_shdwc.h> |
| |
| #include "generic.h" |
| #include "clock.h" |
| |
| static struct map_desc at91cap9_io_desc[] __initdata = { |
| { |
| .virtual = AT91_VA_BASE_SYS, |
| .pfn = __phys_to_pfn(AT91_BASE_SYS), |
| .length = SZ_16K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE, |
| .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE), |
| .length = AT91CAP9_SRAM_SIZE, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| /* -------------------------------------------------------------------- |
| * Clocks |
| * -------------------------------------------------------------------- */ |
| |
| /* |
| * The peripheral clocks. |
| */ |
| static struct clk pioABCD_clk = { |
| .name = "pioABCD_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_PIOABCD, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk mpb0_clk = { |
| .name = "mpb0_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_MPB0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk mpb1_clk = { |
| .name = "mpb1_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_MPB1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk mpb2_clk = { |
| .name = "mpb2_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_MPB2, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk mpb3_clk = { |
| .name = "mpb3_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_MPB3, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk mpb4_clk = { |
| .name = "mpb4_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_MPB4, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart0_clk = { |
| .name = "usart0_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_US0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart1_clk = { |
| .name = "usart1_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_US1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart2_clk = { |
| .name = "usart2_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_US2, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk mmc0_clk = { |
| .name = "mci0_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_MCI0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk mmc1_clk = { |
| .name = "mci1_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_MCI1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk can_clk = { |
| .name = "can_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_CAN, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk twi_clk = { |
| .name = "twi_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_TWI, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk spi0_clk = { |
| .name = "spi0_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_SPI0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk spi1_clk = { |
| .name = "spi1_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_SPI1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ssc0_clk = { |
| .name = "ssc0_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_SSC0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ssc1_clk = { |
| .name = "ssc1_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_SSC1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ac97_clk = { |
| .name = "ac97_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_AC97C, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tcb_clk = { |
| .name = "tcb_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_TCB, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pwm_clk = { |
| .name = "pwm_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_PWMC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk macb_clk = { |
| .name = "macb_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_EMAC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk aestdes_clk = { |
| .name = "aestdes_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_AESTDES, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk adc_clk = { |
| .name = "adc_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_ADC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk isi_clk = { |
| .name = "isi_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_ISI, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk lcdc_clk = { |
| .name = "lcdc_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_LCDC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk dma_clk = { |
| .name = "dma_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_DMA, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk udphs_clk = { |
| .name = "udphs_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_UDPHS, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ohci_clk = { |
| .name = "ohci_clk", |
| .pmc_mask = 1 << AT91CAP9_ID_UHP, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| |
| static struct clk *periph_clocks[] __initdata = { |
| &pioABCD_clk, |
| &mpb0_clk, |
| &mpb1_clk, |
| &mpb2_clk, |
| &mpb3_clk, |
| &mpb4_clk, |
| &usart0_clk, |
| &usart1_clk, |
| &usart2_clk, |
| &mmc0_clk, |
| &mmc1_clk, |
| &can_clk, |
| &twi_clk, |
| &spi0_clk, |
| &spi1_clk, |
| &ssc0_clk, |
| &ssc1_clk, |
| &ac97_clk, |
| &tcb_clk, |
| &pwm_clk, |
| &macb_clk, |
| &aestdes_clk, |
| &adc_clk, |
| &isi_clk, |
| &lcdc_clk, |
| &dma_clk, |
| &udphs_clk, |
| &ohci_clk, |
| // irq0 .. irq1 |
| }; |
| |
| /* |
| * The four programmable clocks. |
| * You must configure pin multiplexing to bring these signals out. |
| */ |
| static struct clk pck0 = { |
| .name = "pck0", |
| .pmc_mask = AT91_PMC_PCK0, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 0, |
| }; |
| static struct clk pck1 = { |
| .name = "pck1", |
| .pmc_mask = AT91_PMC_PCK1, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 1, |
| }; |
| static struct clk pck2 = { |
| .name = "pck2", |
| .pmc_mask = AT91_PMC_PCK2, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 2, |
| }; |
| static struct clk pck3 = { |
| .name = "pck3", |
| .pmc_mask = AT91_PMC_PCK3, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 3, |
| }; |
| |
| static void __init at91cap9_register_clocks(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) |
| clk_register(periph_clocks[i]); |
| |
| clk_register(&pck0); |
| clk_register(&pck1); |
| clk_register(&pck2); |
| clk_register(&pck3); |
| } |
| |
| /* -------------------------------------------------------------------- |
| * GPIO |
| * -------------------------------------------------------------------- */ |
| |
| static struct at91_gpio_bank at91cap9_gpio[] = { |
| { |
| .id = AT91CAP9_ID_PIOABCD, |
| .offset = AT91_PIOA, |
| .clock = &pioABCD_clk, |
| }, { |
| .id = AT91CAP9_ID_PIOABCD, |
| .offset = AT91_PIOB, |
| .clock = &pioABCD_clk, |
| }, { |
| .id = AT91CAP9_ID_PIOABCD, |
| .offset = AT91_PIOC, |
| .clock = &pioABCD_clk, |
| }, { |
| .id = AT91CAP9_ID_PIOABCD, |
| .offset = AT91_PIOD, |
| .clock = &pioABCD_clk, |
| } |
| }; |
| |
| static void at91cap9_reset(void) |
| { |
| at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); |
| } |
| |
| static void at91cap9_poweroff(void) |
| { |
| at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); |
| } |
| |
| |
| /* -------------------------------------------------------------------- |
| * AT91CAP9 processor initialization |
| * -------------------------------------------------------------------- */ |
| |
| void __init at91cap9_initialize(unsigned long main_clock) |
| { |
| /* Map peripherals */ |
| iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); |
| |
| at91_arch_reset = at91cap9_reset; |
| pm_power_off = at91cap9_poweroff; |
| at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); |
| |
| /* Init clock subsystem */ |
| at91_clock_init(main_clock); |
| |
| /* Register the processor-specific clocks */ |
| at91cap9_register_clocks(); |
| |
| /* Register GPIO subsystem */ |
| at91_gpio_init(at91cap9_gpio, 4); |
| |
| /* Remember the silicon revision */ |
| if (cpu_is_at91cap9_revB()) |
| system_rev = 0xB; |
| else if (cpu_is_at91cap9_revC()) |
| system_rev = 0xC; |
| } |
| |
| /* -------------------------------------------------------------------- |
| * Interrupt initialization |
| * -------------------------------------------------------------------- */ |
| |
| /* |
| * The default interrupt priority levels (0 = lowest, 7 = highest). |
| */ |
| static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { |
| 7, /* Advanced Interrupt Controller (FIQ) */ |
| 7, /* System Peripherals */ |
| 1, /* Parallel IO Controller A, B, C and D */ |
| 0, /* MP Block Peripheral 0 */ |
| 0, /* MP Block Peripheral 1 */ |
| 0, /* MP Block Peripheral 2 */ |
| 0, /* MP Block Peripheral 3 */ |
| 0, /* MP Block Peripheral 4 */ |
| 5, /* USART 0 */ |
| 5, /* USART 1 */ |
| 5, /* USART 2 */ |
| 0, /* Multimedia Card Interface 0 */ |
| 0, /* Multimedia Card Interface 1 */ |
| 3, /* CAN */ |
| 6, /* Two-Wire Interface */ |
| 5, /* Serial Peripheral Interface 0 */ |
| 5, /* Serial Peripheral Interface 1 */ |
| 4, /* Serial Synchronous Controller 0 */ |
| 4, /* Serial Synchronous Controller 1 */ |
| 5, /* AC97 Controller */ |
| 0, /* Timer Counter 0, 1 and 2 */ |
| 0, /* Pulse Width Modulation Controller */ |
| 3, /* Ethernet */ |
| 0, /* Advanced Encryption Standard, Triple DES*/ |
| 0, /* Analog-to-Digital Converter */ |
| 0, /* Image Sensor Interface */ |
| 3, /* LCD Controller */ |
| 0, /* DMA Controller */ |
| 2, /* USB Device Port */ |
| 2, /* USB Host port */ |
| 0, /* Advanced Interrupt Controller (IRQ0) */ |
| 0, /* Advanced Interrupt Controller (IRQ1) */ |
| }; |
| |
| void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS]) |
| { |
| if (!priority) |
| priority = at91cap9_default_irq_priority; |
| |
| /* Initialize the AIC interrupt controller */ |
| at91_aic_init(priority); |
| |
| /* Enable GPIO interrupts */ |
| at91_gpio_irq_setup(); |
| } |