| /* Encapsulate basic setting changes and retrieval on Hermes hardware |
| * |
| * See copyright notice in main.c |
| */ |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/if_arp.h> |
| #include <linux/ieee80211.h> |
| #include <linux/wireless.h> |
| #include <net/cfg80211.h> |
| #include "hermes.h" |
| #include "hermes_rid.h" |
| #include "orinoco.h" |
| |
| #include "hw.h" |
| |
| #define SYMBOL_MAX_VER_LEN (14) |
| |
| /* Symbol firmware has a bug allocating buffers larger than this */ |
| #define TX_NICBUF_SIZE_BUG 1585 |
| |
| /********************************************************************/ |
| /* Data tables */ |
| /********************************************************************/ |
| |
| /* This tables gives the actual meanings of the bitrate IDs returned |
| * by the firmware. */ |
| static const struct { |
| int bitrate; /* in 100s of kilobits */ |
| int automatic; |
| u16 agere_txratectrl; |
| u16 intersil_txratectrl; |
| } bitrate_table[] = { |
| {110, 1, 3, 15}, /* Entry 0 is the default */ |
| {10, 0, 1, 1}, |
| {10, 1, 1, 1}, |
| {20, 0, 2, 2}, |
| {20, 1, 6, 3}, |
| {55, 0, 4, 4}, |
| {55, 1, 7, 7}, |
| {110, 0, 5, 8}, |
| }; |
| #define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) |
| |
| /* Firmware version encoding */ |
| struct comp_id { |
| u16 id, variant, major, minor; |
| } __attribute__ ((packed)); |
| |
| static inline fwtype_t determine_firmware_type(struct comp_id *nic_id) |
| { |
| if (nic_id->id < 0x8000) |
| return FIRMWARE_TYPE_AGERE; |
| else if (nic_id->id == 0x8000 && nic_id->major == 0) |
| return FIRMWARE_TYPE_SYMBOL; |
| else |
| return FIRMWARE_TYPE_INTERSIL; |
| } |
| |
| /* Set priv->firmware type, determine firmware properties |
| * This function can be called before we have registerred with netdev, |
| * so all errors go out with dev_* rather than printk |
| */ |
| int determine_fw_capabilities(struct orinoco_private *priv) |
| { |
| struct device *dev = priv->dev; |
| hermes_t *hw = &priv->hw; |
| int err; |
| struct comp_id nic_id, sta_id; |
| unsigned int firmver; |
| char tmp[SYMBOL_MAX_VER_LEN+1] __attribute__((aligned(2))); |
| |
| /* Get the hardware version */ |
| err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id); |
| if (err) { |
| dev_err(dev, "Cannot read hardware identity: error %d\n", |
| err); |
| return err; |
| } |
| |
| le16_to_cpus(&nic_id.id); |
| le16_to_cpus(&nic_id.variant); |
| le16_to_cpus(&nic_id.major); |
| le16_to_cpus(&nic_id.minor); |
| dev_info(dev, "Hardware identity %04x:%04x:%04x:%04x\n", |
| nic_id.id, nic_id.variant, nic_id.major, nic_id.minor); |
| |
| priv->firmware_type = determine_firmware_type(&nic_id); |
| |
| /* Get the firmware version */ |
| err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id); |
| if (err) { |
| dev_err(dev, "Cannot read station identity: error %d\n", |
| err); |
| return err; |
| } |
| |
| le16_to_cpus(&sta_id.id); |
| le16_to_cpus(&sta_id.variant); |
| le16_to_cpus(&sta_id.major); |
| le16_to_cpus(&sta_id.minor); |
| dev_info(dev, "Station identity %04x:%04x:%04x:%04x\n", |
| sta_id.id, sta_id.variant, sta_id.major, sta_id.minor); |
| |
| switch (sta_id.id) { |
| case 0x15: |
| dev_err(dev, "Primary firmware is active\n"); |
| return -ENODEV; |
| case 0x14b: |
| dev_err(dev, "Tertiary firmware is active\n"); |
| return -ENODEV; |
| case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */ |
| case 0x21: /* Symbol Spectrum24 Trilogy */ |
| break; |
| default: |
| dev_notice(dev, "Unknown station ID, please report\n"); |
| break; |
| } |
| |
| /* Default capabilities */ |
| priv->has_sensitivity = 1; |
| priv->has_mwo = 0; |
| priv->has_preamble = 0; |
| priv->has_port3 = 1; |
| priv->has_ibss = 1; |
| priv->has_wep = 0; |
| priv->has_big_wep = 0; |
| priv->has_alt_txcntl = 0; |
| priv->has_ext_scan = 0; |
| priv->has_wpa = 0; |
| priv->do_fw_download = 0; |
| |
| /* Determine capabilities from the firmware version */ |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: |
| /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, |
| ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ |
| snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, |
| "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor); |
| |
| firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; |
| |
| priv->has_ibss = (firmver >= 0x60006); |
| priv->has_wep = (firmver >= 0x40020); |
| priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell |
| Gold cards from the others? */ |
| priv->has_mwo = (firmver >= 0x60000); |
| priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ |
| priv->ibss_port = 1; |
| priv->has_hostscan = (firmver >= 0x8000a); |
| priv->do_fw_download = 1; |
| priv->broken_monitor = (firmver >= 0x80000); |
| priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */ |
| priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */ |
| priv->has_wpa = (firmver >= 0x9002a); |
| /* Tested with Agere firmware : |
| * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II |
| * Tested CableTron firmware : 4.32 => Anton */ |
| break; |
| case FIRMWARE_TYPE_SYMBOL: |
| /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */ |
| /* Intel MAC : 00:02:B3:* */ |
| /* 3Com MAC : 00:50:DA:* */ |
| memset(tmp, 0, sizeof(tmp)); |
| /* Get the Symbol firmware version */ |
| err = hermes_read_ltv(hw, USER_BAP, |
| HERMES_RID_SECONDARYVERSION_SYMBOL, |
| SYMBOL_MAX_VER_LEN, NULL, &tmp); |
| if (err) { |
| dev_warn(dev, "Error %d reading Symbol firmware info. " |
| "Wildly guessing capabilities...\n", err); |
| firmver = 0; |
| tmp[0] = '\0'; |
| } else { |
| /* The firmware revision is a string, the format is |
| * something like : "V2.20-01". |
| * Quick and dirty parsing... - Jean II |
| */ |
| firmver = ((tmp[1] - '0') << 16) |
| | ((tmp[3] - '0') << 12) |
| | ((tmp[4] - '0') << 8) |
| | ((tmp[6] - '0') << 4) |
| | (tmp[7] - '0'); |
| |
| tmp[SYMBOL_MAX_VER_LEN] = '\0'; |
| } |
| |
| snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, |
| "Symbol %s", tmp); |
| |
| priv->has_ibss = (firmver >= 0x20000); |
| priv->has_wep = (firmver >= 0x15012); |
| priv->has_big_wep = (firmver >= 0x20000); |
| priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || |
| (firmver >= 0x29000 && firmver < 0x30000) || |
| firmver >= 0x31000; |
| priv->has_preamble = (firmver >= 0x20000); |
| priv->ibss_port = 4; |
| |
| /* Symbol firmware is found on various cards, but |
| * there has been no attempt to check firmware |
| * download on non-spectrum_cs based cards. |
| * |
| * Given that the Agere firmware download works |
| * differently, we should avoid doing a firmware |
| * download with the Symbol algorithm on non-spectrum |
| * cards. |
| * |
| * For now we can identify a spectrum_cs based card |
| * because it has a firmware reset function. |
| */ |
| priv->do_fw_download = (priv->stop_fw != NULL); |
| |
| priv->broken_disableport = (firmver == 0x25013) || |
| (firmver >= 0x30000 && firmver <= 0x31000); |
| priv->has_hostscan = (firmver >= 0x31001) || |
| (firmver >= 0x29057 && firmver < 0x30000); |
| /* Tested with Intel firmware : 0x20015 => Jean II */ |
| /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ |
| break; |
| case FIRMWARE_TYPE_INTERSIL: |
| /* D-Link, Linksys, Adtron, ZoomAir, and many others... |
| * Samsung, Compaq 100/200 and Proxim are slightly |
| * different and less well tested */ |
| /* D-Link MAC : 00:40:05:* */ |
| /* Addtron MAC : 00:90:D1:* */ |
| snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, |
| "Intersil %d.%d.%d", sta_id.major, sta_id.minor, |
| sta_id.variant); |
| |
| firmver = ((unsigned long)sta_id.major << 16) | |
| ((unsigned long)sta_id.minor << 8) | sta_id.variant; |
| |
| priv->has_ibss = (firmver >= 0x000700); /* FIXME */ |
| priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); |
| priv->has_pm = (firmver >= 0x000700); |
| priv->has_hostscan = (firmver >= 0x010301); |
| |
| if (firmver >= 0x000800) |
| priv->ibss_port = 0; |
| else { |
| dev_notice(dev, "Intersil firmware earlier than v0.8.x" |
| " - several features not supported\n"); |
| priv->ibss_port = 1; |
| } |
| break; |
| } |
| dev_info(dev, "Firmware determined as %s\n", priv->fw_name); |
| |
| return 0; |
| } |
| |
| /* Read settings from EEPROM into our private structure. |
| * MAC address gets dropped into callers buffer |
| * Can be called before netdev registration. |
| */ |
| int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr) |
| { |
| struct device *dev = priv->dev; |
| struct hermes_idstring nickbuf; |
| hermes_t *hw = &priv->hw; |
| int len; |
| int err; |
| u16 reclen; |
| |
| /* Get the MAC address */ |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, |
| ETH_ALEN, NULL, dev_addr); |
| if (err) { |
| dev_warn(dev, "Failed to read MAC address!\n"); |
| goto out; |
| } |
| |
| dev_dbg(dev, "MAC address %pM\n", dev_addr); |
| |
| /* Get the station name */ |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, |
| sizeof(nickbuf), &reclen, &nickbuf); |
| if (err) { |
| dev_err(dev, "failed to read station name\n"); |
| goto out; |
| } |
| if (nickbuf.len) |
| len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len)); |
| else |
| len = min(IW_ESSID_MAX_SIZE, 2 * reclen); |
| memcpy(priv->nick, &nickbuf.val, len); |
| priv->nick[len] = '\0'; |
| |
| dev_dbg(dev, "Station name \"%s\"\n", priv->nick); |
| |
| /* Get allowed channels */ |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST, |
| &priv->channel_mask); |
| if (err) { |
| dev_err(dev, "Failed to read channel list!\n"); |
| goto out; |
| } |
| |
| /* Get initial AP density */ |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, |
| &priv->ap_density); |
| if (err || priv->ap_density < 1 || priv->ap_density > 3) |
| priv->has_sensitivity = 0; |
| |
| /* Get initial RTS threshold */ |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, |
| &priv->rts_thresh); |
| if (err) { |
| dev_err(dev, "Failed to read RTS threshold!\n"); |
| goto out; |
| } |
| |
| /* Get initial fragmentation settings */ |
| if (priv->has_mwo) |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMWOROBUST_AGERE, |
| &priv->mwo_robust); |
| else |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, |
| &priv->frag_thresh); |
| if (err) { |
| dev_err(dev, "Failed to read fragmentation settings!\n"); |
| goto out; |
| } |
| |
| /* Power management setup */ |
| if (priv->has_pm) { |
| priv->pm_on = 0; |
| priv->pm_mcast = 1; |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMAXSLEEPDURATION, |
| &priv->pm_period); |
| if (err) { |
| dev_err(dev, "Failed to read power management " |
| "period!\n"); |
| goto out; |
| } |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPMHOLDOVERDURATION, |
| &priv->pm_timeout); |
| if (err) { |
| dev_err(dev, "Failed to read power management " |
| "timeout!\n"); |
| goto out; |
| } |
| } |
| |
| /* Preamble setup */ |
| if (priv->has_preamble) { |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPREAMBLE_SYMBOL, |
| &priv->preamble); |
| } |
| |
| out: |
| return err; |
| } |
| |
| /* Can be called before netdev registration */ |
| int orinoco_hw_allocate_fid(struct orinoco_private *priv) |
| { |
| struct device *dev = priv->dev; |
| struct hermes *hw = &priv->hw; |
| int err; |
| |
| err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); |
| if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { |
| /* Try workaround for old Symbol firmware bug */ |
| priv->nicbuf_size = TX_NICBUF_SIZE_BUG; |
| err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); |
| |
| dev_warn(dev, "Firmware ALLOC bug detected " |
| "(old Symbol firmware?). Work around %s\n", |
| err ? "failed!" : "ok."); |
| } |
| |
| return err; |
| } |
| |
| int orinoco_get_bitratemode(int bitrate, int automatic) |
| { |
| int ratemode = -1; |
| int i; |
| |
| if ((bitrate != 10) && (bitrate != 20) && |
| (bitrate != 55) && (bitrate != 110)) |
| return ratemode; |
| |
| for (i = 0; i < BITRATE_TABLE_SIZE; i++) { |
| if ((bitrate_table[i].bitrate == bitrate) && |
| (bitrate_table[i].automatic == automatic)) { |
| ratemode = i; |
| break; |
| } |
| } |
| return ratemode; |
| } |
| |
| void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic) |
| { |
| BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); |
| |
| *bitrate = bitrate_table[ratemode].bitrate * 100000; |
| *automatic = bitrate_table[ratemode].automatic; |
| } |
| |
| int orinoco_hw_program_rids(struct orinoco_private *priv) |
| { |
| struct net_device *dev = priv->ndev; |
| struct wireless_dev *wdev = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err; |
| struct hermes_idstring idbuf; |
| |
| /* Set the MAC address */ |
| err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, |
| HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting MAC address\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set up the link mode */ |
| err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, |
| priv->port_type); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting port type\n", |
| dev->name, err); |
| return err; |
| } |
| /* Set the channel/frequency */ |
| if (priv->channel != 0 && priv->iw_mode != NL80211_IFTYPE_STATION) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFOWNCHANNEL, |
| priv->channel); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting channel %d\n", |
| dev->name, err, priv->channel); |
| return err; |
| } |
| } |
| |
| if (priv->has_ibss) { |
| u16 createibss; |
| |
| if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { |
| printk(KERN_WARNING "%s: This firmware requires an " |
| "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); |
| /* With wvlan_cs, in this case, we would crash. |
| * hopefully, this driver will behave better... |
| * Jean II */ |
| createibss = 0; |
| } else { |
| createibss = priv->createibss; |
| } |
| |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFCREATEIBSS, |
| createibss); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", |
| dev->name, err); |
| return err; |
| } |
| } |
| |
| /* Set the desired BSSID */ |
| err = __orinoco_hw_set_wap(priv); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting AP address\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set the desired ESSID */ |
| idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); |
| memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); |
| /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ |
| err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, |
| HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), |
| &idbuf); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting OWNSSID\n", |
| dev->name, err); |
| return err; |
| } |
| err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, |
| HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), |
| &idbuf); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set the station name */ |
| idbuf.len = cpu_to_le16(strlen(priv->nick)); |
| memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); |
| err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, |
| HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2), |
| &idbuf); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting nickname\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set AP density */ |
| if (priv->has_sensitivity) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFSYSTEMSCALE, |
| priv->ap_density); |
| if (err) { |
| printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " |
| "Disabling sensitivity control\n", |
| dev->name, err); |
| |
| priv->has_sensitivity = 0; |
| } |
| } |
| |
| /* Set RTS threshold */ |
| err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, |
| priv->rts_thresh); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting RTS threshold\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set fragmentation threshold or MWO robustness */ |
| if (priv->has_mwo) |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMWOROBUST_AGERE, |
| priv->mwo_robust); |
| else |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, |
| priv->frag_thresh); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting fragmentation\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set bitrate */ |
| err = __orinoco_hw_set_bitrate(priv); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting bitrate\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set power management */ |
| if (priv->has_pm) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPMENABLED, |
| priv->pm_on); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting up PM\n", |
| dev->name, err); |
| return err; |
| } |
| |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMULTICASTRECEIVE, |
| priv->pm_mcast); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting up PM\n", |
| dev->name, err); |
| return err; |
| } |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMAXSLEEPDURATION, |
| priv->pm_period); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting up PM\n", |
| dev->name, err); |
| return err; |
| } |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPMHOLDOVERDURATION, |
| priv->pm_timeout); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting up PM\n", |
| dev->name, err); |
| return err; |
| } |
| } |
| |
| /* Set preamble - only for Symbol so far... */ |
| if (priv->has_preamble) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPREAMBLE_SYMBOL, |
| priv->preamble); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting preamble\n", |
| dev->name, err); |
| return err; |
| } |
| } |
| |
| /* Set up encryption */ |
| if (priv->has_wep || priv->has_wpa) { |
| err = __orinoco_hw_setup_enc(priv); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d activating encryption\n", |
| dev->name, err); |
| return err; |
| } |
| } |
| |
| if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { |
| /* Enable monitor mode */ |
| dev->type = ARPHRD_IEEE80211; |
| err = hermes_docmd_wait(hw, HERMES_CMD_TEST | |
| HERMES_TEST_MONITOR, 0, NULL); |
| } else { |
| /* Disable monitor mode */ |
| dev->type = ARPHRD_ETHER; |
| err = hermes_docmd_wait(hw, HERMES_CMD_TEST | |
| HERMES_TEST_STOP, 0, NULL); |
| } |
| if (err) |
| return err; |
| |
| /* Reset promiscuity / multicast*/ |
| priv->promiscuous = 0; |
| priv->mc_count = 0; |
| |
| /* Record mode change */ |
| wdev->iftype = priv->iw_mode; |
| |
| return 0; |
| } |
| |
| /* Get tsc from the firmware */ |
| int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| u8 tsc_arr[4][ORINOCO_SEQ_LEN]; |
| |
| if ((key < 0) || (key >= 4)) |
| return -EINVAL; |
| |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, |
| sizeof(tsc_arr), NULL, &tsc_arr); |
| if (!err) |
| memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0])); |
| |
| return err; |
| } |
| |
| int __orinoco_hw_set_bitrate(struct orinoco_private *priv) |
| { |
| hermes_t *hw = &priv->hw; |
| int ratemode = priv->bitratemode; |
| int err = 0; |
| |
| if (ratemode >= BITRATE_TABLE_SIZE) { |
| printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", |
| priv->ndev->name, ratemode); |
| return -EINVAL; |
| } |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFTXRATECONTROL, |
| bitrate_table[ratemode].agere_txratectrl); |
| break; |
| case FIRMWARE_TYPE_INTERSIL: |
| case FIRMWARE_TYPE_SYMBOL: |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFTXRATECONTROL, |
| bitrate_table[ratemode].intersil_txratectrl); |
| break; |
| default: |
| BUG(); |
| } |
| |
| return err; |
| } |
| |
| int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate) |
| { |
| hermes_t *hw = &priv->hw; |
| int i; |
| int err = 0; |
| u16 val; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CURRENTTXRATE, &val); |
| if (err) |
| return err; |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ |
| /* Note : in Lucent firmware, the return value of |
| * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, |
| * and therefore is totally different from the |
| * encoding of HERMES_RID_CNFTXRATECONTROL. |
| * Don't forget that 6Mb/s is really 5.5Mb/s */ |
| if (val == 6) |
| *bitrate = 5500000; |
| else |
| *bitrate = val * 1000000; |
| break; |
| case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ |
| case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ |
| for (i = 0; i < BITRATE_TABLE_SIZE; i++) |
| if (bitrate_table[i].intersil_txratectrl == val) |
| break; |
| |
| if (i >= BITRATE_TABLE_SIZE) |
| printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", |
| priv->ndev->name, val); |
| |
| *bitrate = bitrate_table[i].bitrate * 100000; |
| break; |
| default: |
| BUG(); |
| } |
| |
| return err; |
| } |
| |
| /* Set fixed AP address */ |
| int __orinoco_hw_set_wap(struct orinoco_private *priv) |
| { |
| int roaming_flag; |
| int err = 0; |
| hermes_t *hw = &priv->hw; |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: |
| /* not supported */ |
| break; |
| case FIRMWARE_TYPE_INTERSIL: |
| if (priv->bssid_fixed) |
| roaming_flag = 2; |
| else |
| roaming_flag = 1; |
| |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFROAMINGMODE, |
| roaming_flag); |
| break; |
| case FIRMWARE_TYPE_SYMBOL: |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, |
| HERMES_RID_CNFMANDATORYBSSID_SYMBOL, |
| &priv->desired_bssid); |
| break; |
| } |
| return err; |
| } |
| |
| /* Change the WEP keys and/or the current keys. Can be called |
| * either from __orinoco_hw_setup_enc() or directly from |
| * orinoco_ioctl_setiwencode(). In the later case the association |
| * with the AP is not broken (if the firmware can handle it), |
| * which is needed for 802.1x implementations. */ |
| int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| int i; |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: |
| { |
| struct orinoco_key keys[ORINOCO_MAX_KEYS]; |
| |
| memset(&keys, 0, sizeof(keys)); |
| for (i = 0; i < ORINOCO_MAX_KEYS; i++) { |
| int len = min(priv->keys[i].key_len, |
| ORINOCO_MAX_KEY_SIZE); |
| memcpy(&keys[i].data, priv->keys[i].key, len); |
| if (len > SMALL_KEY_SIZE) |
| keys[i].len = cpu_to_le16(LARGE_KEY_SIZE); |
| else if (len > 0) |
| keys[i].len = cpu_to_le16(SMALL_KEY_SIZE); |
| else |
| keys[i].len = cpu_to_le16(0); |
| } |
| |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, |
| HERMES_RID_CNFWEPKEYS_AGERE, |
| &keys); |
| if (err) |
| return err; |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFTXKEY_AGERE, |
| priv->tx_key); |
| if (err) |
| return err; |
| break; |
| } |
| case FIRMWARE_TYPE_INTERSIL: |
| case FIRMWARE_TYPE_SYMBOL: |
| { |
| int keylen; |
| |
| /* Force uniform key length to work around |
| * firmware bugs */ |
| keylen = priv->keys[priv->tx_key].key_len; |
| |
| if (keylen > LARGE_KEY_SIZE) { |
| printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", |
| priv->ndev->name, priv->tx_key, keylen); |
| return -E2BIG; |
| } else if (keylen > SMALL_KEY_SIZE) |
| keylen = LARGE_KEY_SIZE; |
| else if (keylen > 0) |
| keylen = SMALL_KEY_SIZE; |
| else |
| keylen = 0; |
| |
| /* Write all 4 keys */ |
| for (i = 0; i < ORINOCO_MAX_KEYS; i++) { |
| u8 key[LARGE_KEY_SIZE] = { 0 }; |
| |
| memcpy(key, priv->keys[i].key, |
| priv->keys[i].key_len); |
| |
| err = hermes_write_ltv(hw, USER_BAP, |
| HERMES_RID_CNFDEFAULTKEY0 + i, |
| HERMES_BYTES_TO_RECLEN(keylen), |
| key); |
| if (err) |
| return err; |
| } |
| |
| /* Write the index of the key used in transmission */ |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFWEPDEFAULTKEYID, |
| priv->tx_key); |
| if (err) |
| return err; |
| } |
| break; |
| } |
| |
| return 0; |
| } |
| |
| int __orinoco_hw_setup_enc(struct orinoco_private *priv) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| int master_wep_flag; |
| int auth_flag; |
| int enc_flag; |
| |
| /* Setup WEP keys */ |
| if (priv->encode_alg == ORINOCO_ALG_WEP) |
| __orinoco_hw_setup_wepkeys(priv); |
| |
| if (priv->wep_restrict) |
| auth_flag = HERMES_AUTH_SHARED_KEY; |
| else |
| auth_flag = HERMES_AUTH_OPEN; |
| |
| if (priv->wpa_enabled) |
| enc_flag = 2; |
| else if (priv->encode_alg == ORINOCO_ALG_WEP) |
| enc_flag = 1; |
| else |
| enc_flag = 0; |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ |
| if (priv->encode_alg == ORINOCO_ALG_WEP) { |
| /* Enable the shared-key authentication. */ |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFAUTHENTICATION_AGERE, |
| auth_flag); |
| } |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFWEPENABLED_AGERE, |
| enc_flag); |
| if (err) |
| return err; |
| |
| if (priv->has_wpa) { |
| /* Set WPA key management */ |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE, |
| priv->key_mgmt); |
| if (err) |
| return err; |
| } |
| |
| break; |
| |
| case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ |
| case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ |
| if (priv->encode_alg == ORINOCO_ALG_WEP) { |
| if (priv->wep_restrict || |
| (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) |
| master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | |
| HERMES_WEP_EXCL_UNENCRYPTED; |
| else |
| master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; |
| |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFAUTHENTICATION, |
| auth_flag); |
| if (err) |
| return err; |
| } else |
| master_wep_flag = 0; |
| |
| if (priv->iw_mode == NL80211_IFTYPE_MONITOR) |
| master_wep_flag |= HERMES_WEP_HOST_DECRYPT; |
| |
| /* Master WEP setting : on/off */ |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFWEPFLAGS_INTERSIL, |
| master_wep_flag); |
| if (err) |
| return err; |
| |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* key must be 32 bytes, including the tx and rx MIC keys. |
| * rsc must be NULL or up to 8 bytes |
| * tsc must be NULL or up to 8 bytes |
| */ |
| int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx, |
| int set_tx, u8 *key, u8 *rsc, size_t rsc_len, |
| u8 *tsc, size_t tsc_len) |
| { |
| struct { |
| __le16 idx; |
| u8 rsc[ORINOCO_SEQ_LEN]; |
| u8 key[TKIP_KEYLEN]; |
| u8 tx_mic[MIC_KEYLEN]; |
| u8 rx_mic[MIC_KEYLEN]; |
| u8 tsc[ORINOCO_SEQ_LEN]; |
| } __attribute__ ((packed)) buf; |
| hermes_t *hw = &priv->hw; |
| int ret; |
| int err; |
| int k; |
| u16 xmitting; |
| |
| key_idx &= 0x3; |
| |
| if (set_tx) |
| key_idx |= 0x8000; |
| |
| buf.idx = cpu_to_le16(key_idx); |
| memcpy(buf.key, key, |
| sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic)); |
| |
| if (rsc_len > sizeof(buf.rsc)) |
| rsc_len = sizeof(buf.rsc); |
| |
| if (tsc_len > sizeof(buf.tsc)) |
| tsc_len = sizeof(buf.tsc); |
| |
| memset(buf.rsc, 0, sizeof(buf.rsc)); |
| memset(buf.tsc, 0, sizeof(buf.tsc)); |
| |
| if (rsc != NULL) |
| memcpy(buf.rsc, rsc, rsc_len); |
| |
| if (tsc != NULL) |
| memcpy(buf.tsc, tsc, tsc_len); |
| else |
| buf.tsc[4] = 0x10; |
| |
| /* Wait upto 100ms for tx queue to empty */ |
| for (k = 100; k > 0; k--) { |
| udelay(1000); |
| ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, |
| &xmitting); |
| if (ret || !xmitting) |
| break; |
| } |
| |
| if (k == 0) |
| ret = -ETIMEDOUT; |
| |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, |
| HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE, |
| &buf); |
| |
| return ret ? ret : err; |
| } |
| |
| int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx) |
| { |
| hermes_t *hw = &priv->hw; |
| int err; |
| |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE, |
| key_idx); |
| if (err) |
| printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n", |
| priv->ndev->name, err, key_idx); |
| return err; |
| } |
| |
| int __orinoco_hw_set_multicast_list(struct orinoco_private *priv, |
| struct dev_addr_list *mc_list, |
| int mc_count, int promisc) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| |
| if (promisc != priv->promiscuous) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPROMISCUOUSMODE, |
| promisc); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", |
| priv->ndev->name, err); |
| } else |
| priv->promiscuous = promisc; |
| } |
| |
| /* If we're not in promiscuous mode, then we need to set the |
| * group address if either we want to multicast, or if we were |
| * multicasting and want to stop */ |
| if (!promisc && (mc_count || priv->mc_count)) { |
| struct dev_mc_list *p = mc_list; |
| struct hermes_multicast mclist; |
| int i; |
| |
| for (i = 0; i < mc_count; i++) { |
| /* paranoia: is list shorter than mc_count? */ |
| BUG_ON(!p); |
| /* paranoia: bad address size in list? */ |
| BUG_ON(p->dmi_addrlen != ETH_ALEN); |
| |
| memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN); |
| p = p->next; |
| } |
| |
| if (p) |
| printk(KERN_WARNING "%s: Multicast list is " |
| "longer than mc_count\n", priv->ndev->name); |
| |
| err = hermes_write_ltv(hw, USER_BAP, |
| HERMES_RID_CNFGROUPADDRESSES, |
| HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN), |
| &mclist); |
| if (err) |
| printk(KERN_ERR "%s: Error %d setting multicast list.\n", |
| priv->ndev->name, err); |
| else |
| priv->mc_count = mc_count; |
| } |
| return err; |
| } |
| |
| /* Return : < 0 -> error code ; >= 0 -> length */ |
| int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, |
| char buf[IW_ESSID_MAX_SIZE+1]) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| struct hermes_idstring essidbuf; |
| char *p = (char *)(&essidbuf.val); |
| int len; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if (strlen(priv->desired_essid) > 0) { |
| /* We read the desired SSID from the hardware rather |
| than from priv->desired_essid, just in case the |
| firmware is allowed to change it on us. I'm not |
| sure about this */ |
| /* My guess is that the OWNSSID should always be whatever |
| * we set to the card, whereas CURRENT_SSID is the one that |
| * may change... - Jean II */ |
| u16 rid; |
| |
| *active = 1; |
| |
| rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : |
| HERMES_RID_CNFDESIREDSSID; |
| |
| err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), |
| NULL, &essidbuf); |
| if (err) |
| goto fail_unlock; |
| } else { |
| *active = 0; |
| |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, |
| sizeof(essidbuf), NULL, &essidbuf); |
| if (err) |
| goto fail_unlock; |
| } |
| |
| len = le16_to_cpu(essidbuf.len); |
| BUG_ON(len > IW_ESSID_MAX_SIZE); |
| |
| memset(buf, 0, IW_ESSID_MAX_SIZE); |
| memcpy(buf, p, len); |
| err = len; |
| |
| fail_unlock: |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| int orinoco_hw_get_freq(struct orinoco_private *priv) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| u16 channel; |
| int freq = 0; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, |
| &channel); |
| if (err) |
| goto out; |
| |
| /* Intersil firmware 1.3.5 returns 0 when the interface is down */ |
| if (channel == 0) { |
| err = -EBUSY; |
| goto out; |
| } |
| |
| if ((channel < 1) || (channel > NUM_CHANNELS)) { |
| printk(KERN_WARNING "%s: Channel out of range (%d)!\n", |
| priv->ndev->name, channel); |
| err = -EBUSY; |
| goto out; |
| |
| } |
| freq = ieee80211_dsss_chan_to_freq(channel); |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| if (err > 0) |
| err = -EBUSY; |
| return err ? err : freq; |
| } |
| |
| int orinoco_hw_get_bitratelist(struct orinoco_private *priv, |
| int *numrates, s32 *rates, int max) |
| { |
| hermes_t *hw = &priv->hw; |
| struct hermes_idstring list; |
| unsigned char *p = (unsigned char *)&list.val; |
| int err = 0; |
| int num; |
| int i; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, |
| sizeof(list), NULL, &list); |
| orinoco_unlock(priv, &flags); |
| |
| if (err) |
| return err; |
| |
| num = le16_to_cpu(list.len); |
| *numrates = num; |
| num = min(num, max); |
| |
| for (i = 0; i < num; i++) |
| rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ |
| |
| return 0; |
| } |
| |
| int orinoco_hw_trigger_scan(struct orinoco_private *priv, |
| const struct cfg80211_ssid *ssid) |
| { |
| struct net_device *dev = priv->ndev; |
| hermes_t *hw = &priv->hw; |
| unsigned long flags; |
| int err = 0; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| /* Scanning with port 0 disabled would fail */ |
| if (!netif_running(dev)) { |
| err = -ENETDOWN; |
| goto out; |
| } |
| |
| /* In monitor mode, the scan results are always empty. |
| * Probe responses are passed to the driver as received |
| * frames and could be processed in software. */ |
| if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { |
| err = -EOPNOTSUPP; |
| goto out; |
| } |
| |
| if (priv->has_hostscan) { |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_SYMBOL: |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFHOSTSCAN_SYMBOL, |
| HERMES_HOSTSCAN_SYMBOL_ONCE | |
| HERMES_HOSTSCAN_SYMBOL_BCAST); |
| break; |
| case FIRMWARE_TYPE_INTERSIL: { |
| __le16 req[3]; |
| |
| req[0] = cpu_to_le16(0x3fff); /* All channels */ |
| req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */ |
| req[2] = 0; /* Any ESSID */ |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, |
| HERMES_RID_CNFHOSTSCAN, &req); |
| break; |
| } |
| case FIRMWARE_TYPE_AGERE: |
| if (ssid->ssid_len > 0) { |
| struct hermes_idstring idbuf; |
| size_t len = ssid->ssid_len; |
| |
| idbuf.len = cpu_to_le16(len); |
| memcpy(idbuf.val, ssid->ssid, len); |
| |
| err = hermes_write_ltv(hw, USER_BAP, |
| HERMES_RID_CNFSCANSSID_AGERE, |
| HERMES_BYTES_TO_RECLEN(len + 2), |
| &idbuf); |
| } else |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFSCANSSID_AGERE, |
| 0); /* Any ESSID */ |
| if (err) |
| break; |
| |
| if (priv->has_ext_scan) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFSCANCHANNELS2GHZ, |
| 0x7FFF); |
| if (err) |
| goto out; |
| |
| err = hermes_inquire(hw, |
| HERMES_INQ_CHANNELINFO); |
| } else |
| err = hermes_inquire(hw, HERMES_INQ_SCAN); |
| |
| break; |
| } |
| } else |
| err = hermes_inquire(hw, HERMES_INQ_SCAN); |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| /* Disassociate from node with BSSID addr */ |
| int orinoco_hw_disassociate(struct orinoco_private *priv, |
| u8 *addr, u16 reason_code) |
| { |
| hermes_t *hw = &priv->hw; |
| int err; |
| |
| struct { |
| u8 addr[ETH_ALEN]; |
| __le16 reason_code; |
| } __attribute__ ((packed)) buf; |
| |
| /* Currently only supported by WPA enabled Agere fw */ |
| if (!priv->has_wpa) |
| return -EOPNOTSUPP; |
| |
| memcpy(buf.addr, addr, ETH_ALEN); |
| buf.reason_code = cpu_to_le16(reason_code); |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, |
| HERMES_RID_CNFDISASSOCIATE, |
| &buf); |
| return err; |
| } |
| |
| int orinoco_hw_get_current_bssid(struct orinoco_private *priv, |
| u8 *addr) |
| { |
| hermes_t *hw = &priv->hw; |
| int err; |
| |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, |
| ETH_ALEN, NULL, addr); |
| |
| return err; |
| } |