| /* |
| * Lyrtech SFFSDR board support. |
| * |
| * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com> |
| * Copyright (C) 2008 Lyrtech <www.lyrtech.com> |
| * |
| * Based on DV-EVM platform, original copyright follows: |
| * |
| * Copyright (C) 2007 MontaVista Software, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| |
| #include <linux/i2c.h> |
| #include <linux/i2c/at24.h> |
| #include <linux/etherdevice.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/mtd/physmap.h> |
| #include <linux/io.h> |
| |
| #include <asm/setup.h> |
| #include <asm/mach-types.h> |
| |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/flash.h> |
| |
| #include <mach/dm644x.h> |
| #include <mach/common.h> |
| #include <mach/i2c.h> |
| #include <mach/serial.h> |
| #include <mach/psc.h> |
| #include <mach/mux.h> |
| |
| #define SFFSDR_PHY_MASK (0x2) |
| #define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ |
| |
| #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 |
| #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 |
| |
| struct mtd_partition davinci_sffsdr_nandflash_partition[] = { |
| /* U-Boot Environment: Block 0 |
| * UBL: Block 1 |
| * U-Boot: Blocks 6-7 (256 kb) |
| * Integrity Kernel: Blocks 8-31 (3 Mb) |
| * Integrity Data: Blocks 100-END |
| */ |
| { |
| .name = "Linux Kernel", |
| .offset = 32 * SZ_128K, |
| .size = 16 * SZ_128K, /* 2 Mb */ |
| .mask_flags = MTD_WRITEABLE, /* Force read-only */ |
| }, |
| { |
| .name = "Linux ROOT", |
| .offset = MTDPART_OFS_APPEND, |
| .size = 256 * SZ_128K, /* 32 Mb */ |
| .mask_flags = 0, /* R/W */ |
| }, |
| }; |
| |
| static struct flash_platform_data davinci_sffsdr_nandflash_data = { |
| .parts = davinci_sffsdr_nandflash_partition, |
| .nr_parts = ARRAY_SIZE(davinci_sffsdr_nandflash_partition), |
| }; |
| |
| static struct resource davinci_sffsdr_nandflash_resource[] = { |
| { |
| .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, |
| .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, |
| .flags = IORESOURCE_MEM, |
| }, { |
| .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, |
| .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct platform_device davinci_sffsdr_nandflash_device = { |
| .name = "davinci_nand", /* Name of driver */ |
| .id = 0, |
| .dev = { |
| .platform_data = &davinci_sffsdr_nandflash_data, |
| }, |
| .num_resources = ARRAY_SIZE(davinci_sffsdr_nandflash_resource), |
| .resource = davinci_sffsdr_nandflash_resource, |
| }; |
| |
| static struct emac_platform_data sffsdr_emac_pdata = { |
| .phy_mask = SFFSDR_PHY_MASK, |
| .mdio_max_freq = SFFSDR_MDIO_FREQUENCY, |
| }; |
| |
| static struct at24_platform_data eeprom_info = { |
| .byte_len = (64*1024) / 8, |
| .page_size = 32, |
| .flags = AT24_FLAG_ADDR16, |
| }; |
| |
| static struct i2c_board_info __initdata i2c_info[] = { |
| { |
| I2C_BOARD_INFO("24lc64", 0x50), |
| .platform_data = &eeprom_info, |
| }, |
| /* Other I2C devices: |
| * MSP430, addr 0x23 (not used) |
| * PCA9543, addr 0x70 (setup done by U-Boot) |
| * ADS7828, addr 0x48 (ADC for voltage monitoring.) |
| */ |
| }; |
| |
| static struct davinci_i2c_platform_data i2c_pdata = { |
| .bus_freq = 20 /* kHz */, |
| .bus_delay = 100 /* usec */, |
| }; |
| |
| static void __init sffsdr_init_i2c(void) |
| { |
| davinci_init_i2c(&i2c_pdata); |
| i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); |
| } |
| |
| static struct platform_device *davinci_sffsdr_devices[] __initdata = { |
| &davinci_sffsdr_nandflash_device, |
| }; |
| |
| static struct davinci_uart_config uart_config __initdata = { |
| .enabled_uarts = (1 << 0), |
| }; |
| |
| static void __init davinci_sffsdr_map_io(void) |
| { |
| dm644x_init(); |
| } |
| |
| static __init void davinci_sffsdr_init(void) |
| { |
| struct davinci_soc_info *soc_info = &davinci_soc_info; |
| |
| platform_add_devices(davinci_sffsdr_devices, |
| ARRAY_SIZE(davinci_sffsdr_devices)); |
| sffsdr_init_i2c(); |
| davinci_serial_init(&uart_config); |
| soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK; |
| soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY; |
| setup_usb(0, 0); /* We support only peripheral mode. */ |
| |
| /* mux VLYNQ pins */ |
| davinci_cfg_reg(DM644X_VLYNQEN); |
| davinci_cfg_reg(DM644X_VLYNQWD); |
| } |
| |
| static __init void davinci_sffsdr_irq_init(void) |
| { |
| davinci_irq_init(); |
| } |
| |
| MACHINE_START(SFFSDR, "Lyrtech SFFSDR") |
| /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */ |
| .phys_io = IO_PHYS, |
| .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, |
| .boot_params = (DAVINCI_DDR_BASE + 0x100), |
| .map_io = davinci_sffsdr_map_io, |
| .init_irq = davinci_sffsdr_irq_init, |
| .timer = &davinci_timer, |
| .init_machine = davinci_sffsdr_init, |
| MACHINE_END |