| # arch/arm/mach-s3c2412/Kconfig |
| # |
| # Copyright 2007 Simtec Electronics |
| # |
| # Licensed under GPLv2 |
| |
| config CPU_S3C2412 |
| bool |
| depends on ARCH_S3C2410 |
| select CPU_ARM926T |
| select CPU_LLSERIAL_S3C2440 |
| select S3C2412_PM if PM |
| select S3C2412_DMA if S3C2410_DMA |
| select S3C2410_GPIO |
| help |
| Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line |
| |
| config CPU_S3C2412_ONLY |
| bool |
| depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ |
| !CPU_S3C2440 && !CPU_S3C2442 && !CPU_S3C2443 && CPU_S3C2412 |
| default y if CPU_S3C2412 |
| |
| config S3C2412_DMA |
| bool |
| depends on CPU_S3C2412 |
| help |
| Internal config node for S3C2412 DMA support |
| |
| config S3C2412_PM |
| bool |
| help |
| Internal config node to apply S3C2412 power management |
| |
| # Note, the S3C2412 IOtiming support is in plat-s3c24xx |
| |
| config S3C2412_CPUFREQ |
| bool |
| depends on CPU_FREQ_S3C24XX && CPU_S3C2412 |
| select S3C2412_IOTIMING |
| default y |
| help |
| CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. |
| |
| menu "S3C2412 Machines" |
| |
| config MACH_JIVE |
| bool "Logitech Jive" |
| select CPU_S3C2412 |
| select S3C_DEV_USB_HOST |
| select S3C_DEV_NAND |
| help |
| Say Y here if you are using the Logitech Jive. |
| |
| config MACH_JIVE_SHOW_BOOTLOADER |
| bool "Allow access to bootloader partitions in MTD" |
| depends on MACH_JIVE && EXPERIMENTAL |
| |
| config MACH_SMDK2413 |
| bool "SMDK2413" |
| select CPU_S3C2412 |
| select MACH_S3C2413 |
| select MACH_SMDK |
| select S3C_DEV_USB_HOST |
| select S3C_DEV_NAND |
| help |
| Say Y here if you are using an SMDK2413 |
| |
| config MACH_S3C2413 |
| bool |
| help |
| Internal node for S3C2413 version of SMDK2413, so that |
| machine_is_s3c2413() will work when MACH_SMDK2413 is |
| selected |
| |
| config MACH_SMDK2412 |
| bool "SMDK2412" |
| select MACH_SMDK2413 |
| help |
| Say Y here if you are using an SMDK2412 |
| |
| Note, this shares support with SMDK2413, so will automatically |
| select MACH_SMDK2413. |
| |
| config MACH_VSTMS |
| bool "VMSTMS" |
| select CPU_S3C2412 |
| select S3C_DEV_USB_HOST |
| select S3C_DEV_NAND |
| help |
| Say Y here if you are using an VSTMS board |
| |
| |
| endmenu |
| |
