| /* |
| * Host Side support for RNDIS Networking Links |
| * Copyright (C) 2005 by David Brownell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/workqueue.h> |
| #include <linux/mii.h> |
| #include <linux/usb.h> |
| #include <linux/usb/cdc.h> |
| #include <linux/usb/usbnet.h> |
| #include <linux/usb/rndis_host.h> |
| |
| |
| /* |
| * RNDIS is NDIS remoted over USB. It's a MSFT variant of CDC ACM ... of |
| * course ACM was intended for modems, not Ethernet links! USB's standard |
| * for Ethernet links is "CDC Ethernet", which is significantly simpler. |
| * |
| * NOTE that Microsoft's "RNDIS 1.0" specification is incomplete. Issues |
| * include: |
| * - Power management in particular relies on information that's scattered |
| * through other documentation, and which is incomplete or incorrect even |
| * there. |
| * - There are various undocumented protocol requirements, such as the |
| * need to send unused garbage in control-OUT messages. |
| * - In some cases, MS-Windows will emit undocumented requests; this |
| * matters more to peripheral implementations than host ones. |
| * |
| * Moreover there's a no-open-specs variant of RNDIS called "ActiveSync". |
| * |
| * For these reasons and others, ** USE OF RNDIS IS STRONGLY DISCOURAGED ** in |
| * favor of such non-proprietary alternatives as CDC Ethernet or the newer (and |
| * currently rare) "Ethernet Emulation Model" (EEM). |
| */ |
| |
| /* |
| * RNDIS notifications from device: command completion; "reverse" |
| * keepalives; etc |
| */ |
| void rndis_status(struct usbnet *dev, struct urb *urb) |
| { |
| devdbg(dev, "rndis status urb, len %d stat %d", |
| urb->actual_length, urb->status); |
| // FIXME for keepalives, respond immediately (asynchronously) |
| // if not an RNDIS status, do like cdc_status(dev,urb) does |
| } |
| EXPORT_SYMBOL_GPL(rndis_status); |
| |
| /* |
| * RNDIS indicate messages. |
| */ |
| static void rndis_msg_indicate(struct usbnet *dev, struct rndis_indicate *msg, |
| int buflen) |
| { |
| struct cdc_state *info = (void *)&dev->data; |
| struct device *udev = &info->control->dev; |
| |
| if (dev->driver_info->indication) { |
| dev->driver_info->indication(dev, msg, buflen); |
| } else { |
| switch (msg->status) { |
| case RNDIS_STATUS_MEDIA_CONNECT: |
| dev_info(udev, "rndis media connect\n"); |
| break; |
| case RNDIS_STATUS_MEDIA_DISCONNECT: |
| dev_info(udev, "rndis media disconnect\n"); |
| break; |
| default: |
| dev_info(udev, "rndis indication: 0x%08x\n", |
| le32_to_cpu(msg->status)); |
| } |
| } |
| } |
| |
| /* |
| * RPC done RNDIS-style. Caller guarantees: |
| * - message is properly byteswapped |
| * - there's no other request pending |
| * - buf can hold up to 1KB response (required by RNDIS spec) |
| * On return, the first few entries are already byteswapped. |
| * |
| * Call context is likely probe(), before interface name is known, |
| * which is why we won't try to use it in the diagnostics. |
| */ |
| int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen) |
| { |
| struct cdc_state *info = (void *) &dev->data; |
| int master_ifnum; |
| int retval; |
| unsigned count; |
| __le32 rsp; |
| u32 xid = 0, msg_len, request_id; |
| |
| /* REVISIT when this gets called from contexts other than probe() or |
| * disconnect(): either serialize, or dispatch responses on xid |
| */ |
| |
| /* Issue the request; xid is unique, don't bother byteswapping it */ |
| if (likely(buf->msg_type != RNDIS_MSG_HALT |
| && buf->msg_type != RNDIS_MSG_RESET)) { |
| xid = dev->xid++; |
| if (!xid) |
| xid = dev->xid++; |
| buf->request_id = (__force __le32) xid; |
| } |
| master_ifnum = info->control->cur_altsetting->desc.bInterfaceNumber; |
| retval = usb_control_msg(dev->udev, |
| usb_sndctrlpipe(dev->udev, 0), |
| USB_CDC_SEND_ENCAPSULATED_COMMAND, |
| USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 0, master_ifnum, |
| buf, le32_to_cpu(buf->msg_len), |
| RNDIS_CONTROL_TIMEOUT_MS); |
| if (unlikely(retval < 0 || xid == 0)) |
| return retval; |
| |
| // FIXME Seems like some devices discard responses when |
| // we time out and cancel our "get response" requests... |
| // so, this is fragile. Probably need to poll for status. |
| |
| /* ignore status endpoint, just poll the control channel; |
| * the request probably completed immediately |
| */ |
| rsp = buf->msg_type | RNDIS_MSG_COMPLETION; |
| for (count = 0; count < 10; count++) { |
| memset(buf, 0, CONTROL_BUFFER_SIZE); |
| retval = usb_control_msg(dev->udev, |
| usb_rcvctrlpipe(dev->udev, 0), |
| USB_CDC_GET_ENCAPSULATED_RESPONSE, |
| USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 0, master_ifnum, |
| buf, buflen, |
| RNDIS_CONTROL_TIMEOUT_MS); |
| if (likely(retval >= 8)) { |
| msg_len = le32_to_cpu(buf->msg_len); |
| request_id = (__force u32) buf->request_id; |
| if (likely(buf->msg_type == rsp)) { |
| if (likely(request_id == xid)) { |
| if (unlikely(rsp == RNDIS_MSG_RESET_C)) |
| return 0; |
| if (likely(RNDIS_STATUS_SUCCESS |
| == buf->status)) |
| return 0; |
| dev_dbg(&info->control->dev, |
| "rndis reply status %08x\n", |
| le32_to_cpu(buf->status)); |
| return -EL3RST; |
| } |
| dev_dbg(&info->control->dev, |
| "rndis reply id %d expected %d\n", |
| request_id, xid); |
| /* then likely retry */ |
| } else switch (buf->msg_type) { |
| case RNDIS_MSG_INDICATE: /* fault/event */ |
| rndis_msg_indicate(dev, (void *)buf, buflen); |
| |
| break; |
| case RNDIS_MSG_KEEPALIVE: { /* ping */ |
| struct rndis_keepalive_c *msg = (void *)buf; |
| |
| msg->msg_type = RNDIS_MSG_KEEPALIVE_C; |
| msg->msg_len = cpu_to_le32(sizeof *msg); |
| msg->status = RNDIS_STATUS_SUCCESS; |
| retval = usb_control_msg(dev->udev, |
| usb_sndctrlpipe(dev->udev, 0), |
| USB_CDC_SEND_ENCAPSULATED_COMMAND, |
| USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 0, master_ifnum, |
| msg, sizeof *msg, |
| RNDIS_CONTROL_TIMEOUT_MS); |
| if (unlikely(retval < 0)) |
| dev_dbg(&info->control->dev, |
| "rndis keepalive err %d\n", |
| retval); |
| } |
| break; |
| default: |
| dev_dbg(&info->control->dev, |
| "unexpected rndis msg %08x len %d\n", |
| le32_to_cpu(buf->msg_type), msg_len); |
| } |
| } else { |
| /* device probably issued a protocol stall; ignore */ |
| dev_dbg(&info->control->dev, |
| "rndis response error, code %d\n", retval); |
| } |
| msleep(20); |
| } |
| dev_dbg(&info->control->dev, "rndis response timeout\n"); |
| return -ETIMEDOUT; |
| } |
| EXPORT_SYMBOL_GPL(rndis_command); |
| |
| /* |
| * rndis_query: |
| * |
| * Performs a query for @oid along with 0 or more bytes of payload as |
| * specified by @in_len. If @reply_len is not set to -1 then the reply |
| * length is checked against this value, resulting in an error if it |
| * doesn't match. |
| * |
| * NOTE: Adding a payload exactly or greater than the size of the expected |
| * response payload is an evident requirement MSFT added for ActiveSync. |
| * |
| * The only exception is for OIDs that return a variably sized response, |
| * in which case no payload should be added. This undocumented (and |
| * nonsensical!) issue was found by sniffing protocol requests from the |
| * ActiveSync 4.1 Windows driver. |
| */ |
| static int rndis_query(struct usbnet *dev, struct usb_interface *intf, |
| void *buf, __le32 oid, u32 in_len, |
| void **reply, int *reply_len) |
| { |
| int retval; |
| union { |
| void *buf; |
| struct rndis_msg_hdr *header; |
| struct rndis_query *get; |
| struct rndis_query_c *get_c; |
| } u; |
| u32 off, len; |
| |
| u.buf = buf; |
| |
| memset(u.get, 0, sizeof *u.get + in_len); |
| u.get->msg_type = RNDIS_MSG_QUERY; |
| u.get->msg_len = cpu_to_le32(sizeof *u.get + in_len); |
| u.get->oid = oid; |
| u.get->len = cpu_to_le32(in_len); |
| u.get->offset = cpu_to_le32(20); |
| |
| retval = rndis_command(dev, u.header, CONTROL_BUFFER_SIZE); |
| if (unlikely(retval < 0)) { |
| dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) failed, %d\n", |
| oid, retval); |
| return retval; |
| } |
| |
| off = le32_to_cpu(u.get_c->offset); |
| len = le32_to_cpu(u.get_c->len); |
| if (unlikely((8 + off + len) > CONTROL_BUFFER_SIZE)) |
| goto response_error; |
| |
| if (*reply_len != -1 && len != *reply_len) |
| goto response_error; |
| |
| *reply = (unsigned char *) &u.get_c->request_id + off; |
| *reply_len = len; |
| |
| return retval; |
| |
| response_error: |
| dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) " |
| "invalid response - off %d len %d\n", |
| oid, off, len); |
| return -EDOM; |
| } |
| |
| /* same as usbnet_netdev_ops but MTU change not allowed */ |
| static const struct net_device_ops rndis_netdev_ops = { |
| .ndo_open = usbnet_open, |
| .ndo_stop = usbnet_stop, |
| .ndo_start_xmit = usbnet_start_xmit, |
| .ndo_tx_timeout = usbnet_tx_timeout, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| int |
| generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags) |
| { |
| int retval; |
| struct net_device *net = dev->net; |
| struct cdc_state *info = (void *) &dev->data; |
| union { |
| void *buf; |
| struct rndis_msg_hdr *header; |
| struct rndis_init *init; |
| struct rndis_init_c *init_c; |
| struct rndis_query *get; |
| struct rndis_query_c *get_c; |
| struct rndis_set *set; |
| struct rndis_set_c *set_c; |
| struct rndis_halt *halt; |
| } u; |
| u32 tmp; |
| __le32 phym_unspec, *phym; |
| int reply_len; |
| unsigned char *bp; |
| |
| /* we can't rely on i/o from stack working, or stack allocation */ |
| u.buf = kmalloc(CONTROL_BUFFER_SIZE, GFP_KERNEL); |
| if (!u.buf) |
| return -ENOMEM; |
| retval = usbnet_generic_cdc_bind(dev, intf); |
| if (retval < 0) |
| goto fail; |
| |
| u.init->msg_type = RNDIS_MSG_INIT; |
| u.init->msg_len = cpu_to_le32(sizeof *u.init); |
| u.init->major_version = cpu_to_le32(1); |
| u.init->minor_version = cpu_to_le32(0); |
| |
| /* max transfer (in spec) is 0x4000 at full speed, but for |
| * TX we'll stick to one Ethernet packet plus RNDIS framing. |
| * For RX we handle drivers that zero-pad to end-of-packet. |
| * Don't let userspace change these settings. |
| * |
| * NOTE: there still seems to be wierdness here, as if we need |
| * to do some more things to make sure WinCE targets accept this. |
| * They default to jumbograms of 8KB or 16KB, which is absurd |
| * for such low data rates and which is also more than Linux |
| * can usually expect to allocate for SKB data... |
| */ |
| net->hard_header_len += sizeof (struct rndis_data_hdr); |
| dev->hard_mtu = net->mtu + net->hard_header_len; |
| |
| dev->maxpacket = usb_maxpacket(dev->udev, dev->out, 1); |
| if (dev->maxpacket == 0) { |
| if (netif_msg_probe(dev)) |
| dev_dbg(&intf->dev, "dev->maxpacket can't be 0\n"); |
| retval = -EINVAL; |
| goto fail_and_release; |
| } |
| |
| dev->rx_urb_size = dev->hard_mtu + (dev->maxpacket + 1); |
| dev->rx_urb_size &= ~(dev->maxpacket - 1); |
| u.init->max_transfer_size = cpu_to_le32(dev->rx_urb_size); |
| |
| net->netdev_ops = &rndis_netdev_ops; |
| |
| retval = rndis_command(dev, u.header, CONTROL_BUFFER_SIZE); |
| if (unlikely(retval < 0)) { |
| /* it might not even be an RNDIS device!! */ |
| dev_err(&intf->dev, "RNDIS init failed, %d\n", retval); |
| goto fail_and_release; |
| } |
| tmp = le32_to_cpu(u.init_c->max_transfer_size); |
| if (tmp < dev->hard_mtu) { |
| if (tmp <= net->hard_header_len) { |
| dev_err(&intf->dev, |
| "dev can't take %u byte packets (max %u)\n", |
| dev->hard_mtu, tmp); |
| retval = -EINVAL; |
| goto halt_fail_and_release; |
| } |
| dev_warn(&intf->dev, |
| "dev can't take %u byte packets (max %u), " |
| "adjusting MTU to %u\n", |
| dev->hard_mtu, tmp, tmp - net->hard_header_len); |
| dev->hard_mtu = tmp; |
| net->mtu = dev->hard_mtu - net->hard_header_len; |
| } |
| |
| /* REVISIT: peripheral "alignment" request is ignored ... */ |
| dev_dbg(&intf->dev, |
| "hard mtu %u (%u from dev), rx buflen %Zu, align %d\n", |
| dev->hard_mtu, tmp, dev->rx_urb_size, |
| 1 << le32_to_cpu(u.init_c->packet_alignment)); |
| |
| /* module has some device initialization code needs to be done right |
| * after RNDIS_INIT */ |
| if (dev->driver_info->early_init && |
| dev->driver_info->early_init(dev) != 0) |
| goto halt_fail_and_release; |
| |
| /* Check physical medium */ |
| phym = NULL; |
| reply_len = sizeof *phym; |
| retval = rndis_query(dev, intf, u.buf, OID_GEN_PHYSICAL_MEDIUM, |
| 0, (void **) &phym, &reply_len); |
| if (retval != 0 || !phym) { |
| /* OID is optional so don't fail here. */ |
| phym_unspec = RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED; |
| phym = &phym_unspec; |
| } |
| if ((flags & FLAG_RNDIS_PHYM_WIRELESS) && |
| *phym != RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN) { |
| if (netif_msg_probe(dev)) |
| dev_dbg(&intf->dev, "driver requires wireless " |
| "physical medium, but device is not.\n"); |
| retval = -ENODEV; |
| goto halt_fail_and_release; |
| } |
| if ((flags & FLAG_RNDIS_PHYM_NOT_WIRELESS) && |
| *phym == RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN) { |
| if (netif_msg_probe(dev)) |
| dev_dbg(&intf->dev, "driver requires non-wireless " |
| "physical medium, but device is wireless.\n"); |
| retval = -ENODEV; |
| goto halt_fail_and_release; |
| } |
| |
| /* Get designated host ethernet address */ |
| reply_len = ETH_ALEN; |
| retval = rndis_query(dev, intf, u.buf, OID_802_3_PERMANENT_ADDRESS, |
| 48, (void **) &bp, &reply_len); |
| if (unlikely(retval< 0)) { |
| dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval); |
| goto halt_fail_and_release; |
| } |
| memcpy(net->dev_addr, bp, ETH_ALEN); |
| memcpy(net->perm_addr, bp, ETH_ALEN); |
| |
| /* set a nonzero filter to enable data transfers */ |
| memset(u.set, 0, sizeof *u.set); |
| u.set->msg_type = RNDIS_MSG_SET; |
| u.set->msg_len = cpu_to_le32(4 + sizeof *u.set); |
| u.set->oid = OID_GEN_CURRENT_PACKET_FILTER; |
| u.set->len = cpu_to_le32(4); |
| u.set->offset = cpu_to_le32((sizeof *u.set) - 8); |
| *(__le32 *)(u.buf + sizeof *u.set) = RNDIS_DEFAULT_FILTER; |
| |
| retval = rndis_command(dev, u.header, CONTROL_BUFFER_SIZE); |
| if (unlikely(retval < 0)) { |
| dev_err(&intf->dev, "rndis set packet filter, %d\n", retval); |
| goto halt_fail_and_release; |
| } |
| |
| retval = 0; |
| |
| kfree(u.buf); |
| return retval; |
| |
| halt_fail_and_release: |
| memset(u.halt, 0, sizeof *u.halt); |
| u.halt->msg_type = RNDIS_MSG_HALT; |
| u.halt->msg_len = cpu_to_le32(sizeof *u.halt); |
| (void) rndis_command(dev, (void *)u.halt, CONTROL_BUFFER_SIZE); |
| fail_and_release: |
| usb_set_intfdata(info->data, NULL); |
| usb_driver_release_interface(driver_of(intf), info->data); |
| info->data = NULL; |
| fail: |
| kfree(u.buf); |
| return retval; |
| } |
| EXPORT_SYMBOL_GPL(generic_rndis_bind); |
| |
| static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| return generic_rndis_bind(dev, intf, FLAG_RNDIS_PHYM_NOT_WIRELESS); |
| } |
| |
| void rndis_unbind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| struct rndis_halt *halt; |
| |
| /* try to clear any rndis state/activity (no i/o from stack!) */ |
| halt = kzalloc(CONTROL_BUFFER_SIZE, GFP_KERNEL); |
| if (halt) { |
| halt->msg_type = RNDIS_MSG_HALT; |
| halt->msg_len = cpu_to_le32(sizeof *halt); |
| (void) rndis_command(dev, (void *)halt, CONTROL_BUFFER_SIZE); |
| kfree(halt); |
| } |
| |
| usbnet_cdc_unbind(dev, intf); |
| } |
| EXPORT_SYMBOL_GPL(rndis_unbind); |
| |
| /* |
| * DATA -- host must not write zlps |
| */ |
| int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
| { |
| /* peripheral may have batched packets to us... */ |
| while (likely(skb->len)) { |
| struct rndis_data_hdr *hdr = (void *)skb->data; |
| struct sk_buff *skb2; |
| u32 msg_len, data_offset, data_len; |
| |
| msg_len = le32_to_cpu(hdr->msg_len); |
| data_offset = le32_to_cpu(hdr->data_offset); |
| data_len = le32_to_cpu(hdr->data_len); |
| |
| /* don't choke if we see oob, per-packet data, etc */ |
| if (unlikely(hdr->msg_type != RNDIS_MSG_PACKET |
| || skb->len < msg_len |
| || (data_offset + data_len + 8) > msg_len)) { |
| dev->net->stats.rx_frame_errors++; |
| devdbg(dev, "bad rndis message %d/%d/%d/%d, len %d", |
| le32_to_cpu(hdr->msg_type), |
| msg_len, data_offset, data_len, skb->len); |
| return 0; |
| } |
| skb_pull(skb, 8 + data_offset); |
| |
| /* at most one packet left? */ |
| if (likely((data_len - skb->len) <= sizeof *hdr)) { |
| skb_trim(skb, data_len); |
| break; |
| } |
| |
| /* try to return all the packets in the batch */ |
| skb2 = skb_clone(skb, GFP_ATOMIC); |
| if (unlikely(!skb2)) |
| break; |
| skb_pull(skb, msg_len - sizeof *hdr); |
| skb_trim(skb2, data_len); |
| usbnet_skb_return(dev, skb2); |
| } |
| |
| /* caller will usbnet_skb_return the remaining packet */ |
| return 1; |
| } |
| EXPORT_SYMBOL_GPL(rndis_rx_fixup); |
| |
| struct sk_buff * |
| rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) |
| { |
| struct rndis_data_hdr *hdr; |
| struct sk_buff *skb2; |
| unsigned len = skb->len; |
| |
| if (likely(!skb_cloned(skb))) { |
| int room = skb_headroom(skb); |
| |
| /* enough head room as-is? */ |
| if (unlikely((sizeof *hdr) <= room)) |
| goto fill; |
| |
| /* enough room, but needs to be readjusted? */ |
| room += skb_tailroom(skb); |
| if (likely((sizeof *hdr) <= room)) { |
| skb->data = memmove(skb->head + sizeof *hdr, |
| skb->data, len); |
| skb_set_tail_pointer(skb, len); |
| goto fill; |
| } |
| } |
| |
| /* create a new skb, with the correct size (and tailpad) */ |
| skb2 = skb_copy_expand(skb, sizeof *hdr, 1, flags); |
| dev_kfree_skb_any(skb); |
| if (unlikely(!skb2)) |
| return skb2; |
| skb = skb2; |
| |
| /* fill out the RNDIS header. we won't bother trying to batch |
| * packets; Linux minimizes wasted bandwidth through tx queues. |
| */ |
| fill: |
| hdr = (void *) __skb_push(skb, sizeof *hdr); |
| memset(hdr, 0, sizeof *hdr); |
| hdr->msg_type = RNDIS_MSG_PACKET; |
| hdr->msg_len = cpu_to_le32(skb->len); |
| hdr->data_offset = cpu_to_le32(sizeof(*hdr) - 8); |
| hdr->data_len = cpu_to_le32(len); |
| |
| /* FIXME make the last packet always be short ... */ |
| return skb; |
| } |
| EXPORT_SYMBOL_GPL(rndis_tx_fixup); |
| |
| |
| static const struct driver_info rndis_info = { |
| .description = "RNDIS device", |
| .flags = FLAG_ETHER | FLAG_FRAMING_RN | FLAG_NO_SETINT, |
| .bind = rndis_bind, |
| .unbind = rndis_unbind, |
| .status = rndis_status, |
| .rx_fixup = rndis_rx_fixup, |
| .tx_fixup = rndis_tx_fixup, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static const struct usb_device_id products [] = { |
| { |
| /* RNDIS is MSFT's un-official variant of CDC ACM */ |
| USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff), |
| .driver_info = (unsigned long) &rndis_info, |
| }, { |
| /* "ActiveSync" is an undocumented variant of RNDIS, used in WM5 */ |
| USB_INTERFACE_INFO(USB_CLASS_MISC, 1, 1), |
| .driver_info = (unsigned long) &rndis_info, |
| }, { |
| /* RNDIS for tethering */ |
| USB_INTERFACE_INFO(USB_CLASS_WIRELESS_CONTROLLER, 1, 3), |
| .driver_info = (unsigned long) &rndis_info, |
| }, |
| { }, // END |
| }; |
| MODULE_DEVICE_TABLE(usb, products); |
| |
| static struct usb_driver rndis_driver = { |
| .name = "rndis_host", |
| .id_table = products, |
| .probe = usbnet_probe, |
| .disconnect = usbnet_disconnect, |
| .suspend = usbnet_suspend, |
| .resume = usbnet_resume, |
| }; |
| |
| static int __init rndis_init(void) |
| { |
| return usb_register(&rndis_driver); |
| } |
| module_init(rndis_init); |
| |
| static void __exit rndis_exit(void) |
| { |
| usb_deregister(&rndis_driver); |
| } |
| module_exit(rndis_exit); |
| |
| MODULE_AUTHOR("David Brownell"); |
| MODULE_DESCRIPTION("USB Host side RNDIS driver"); |
| MODULE_LICENSE("GPL"); |