| /* |
| * PNX833x Hardware Watchdog Driver |
| * Copyright 2008 NXP Semiconductors |
| * Daniel Laird <daniel.j.laird@nxp.com> |
| * Andre McCurdy <andre.mccurdy@nxp.com> |
| * |
| * Heavily based upon - IndyDog 0.3 |
| * A Hardware Watchdog Device for SGI IP22 |
| * |
| * (c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * based on softdog.c by Alan Cox <alan@redhat.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/fs.h> |
| #include <linux/mm.h> |
| #include <linux/miscdevice.h> |
| #include <linux/watchdog.h> |
| #include <linux/notifier.h> |
| #include <linux/reboot.h> |
| #include <linux/init.h> |
| #include <asm/mach-pnx833x/pnx833x.h> |
| |
| #define PFX "pnx833x: " |
| #define WATCHDOG_TIMEOUT 30 /* 30 sec Maximum timeout */ |
| #define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */ |
| |
| /** CONFIG block */ |
| #define PNX833X_CONFIG (0x07000U) |
| #define PNX833X_CONFIG_CPU_WATCHDOG (0x54) |
| #define PNX833X_CONFIG_CPU_WATCHDOG_COMPARE (0x58) |
| #define PNX833X_CONFIG_CPU_COUNTERS_CONTROL (0x1c) |
| |
| /** RESET block */ |
| #define PNX833X_RESET (0x08000U) |
| #define PNX833X_RESET_CONFIG (0x08) |
| |
| static int pnx833x_wdt_alive; |
| |
| /* Set default timeout in MHZ.*/ |
| static int pnx833x_wdt_timeout = (WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY); |
| module_param(pnx833x_wdt_timeout, int, 0); |
| MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default=" |
| __MODULE_STRING(pnx833x_wdt_timeout) "(30 seconds)."); |
| |
| static int nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, int, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| static int start_enabled = 1; |
| module_param(start_enabled, int, 0); |
| MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion " |
| "(default=" __MODULE_STRING(start_enabled) ")"); |
| |
| static void pnx833x_wdt_start(void) |
| { |
| /* Enable watchdog causing reset. */ |
| PNX833X_REG(PNX833X_RESET + PNX833X_RESET_CONFIG) |= 0x1; |
| /* Set timeout.*/ |
| PNX833X_REG(PNX833X_CONFIG + |
| PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout; |
| /* Enable watchdog. */ |
| PNX833X_REG(PNX833X_CONFIG + |
| PNX833X_CONFIG_CPU_COUNTERS_CONTROL) |= 0x1; |
| |
| printk(KERN_INFO PFX "Started watchdog timer.\n"); |
| } |
| |
| static void pnx833x_wdt_stop(void) |
| { |
| /* Disable watchdog causing reset. */ |
| PNX833X_REG(PNX833X_RESET + PNX833X_CONFIG) &= 0xFFFFFFFE; |
| /* Disable watchdog.*/ |
| PNX833X_REG(PNX833X_CONFIG + |
| PNX833X_CONFIG_CPU_COUNTERS_CONTROL) &= 0xFFFFFFFE; |
| |
| printk(KERN_INFO PFX "Stopped watchdog timer.\n"); |
| } |
| |
| static void pnx833x_wdt_ping(void) |
| { |
| PNX833X_REG(PNX833X_CONFIG + |
| PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout; |
| } |
| |
| /* |
| * Allow only one person to hold it open |
| */ |
| static int pnx833x_wdt_open(struct inode *inode, struct file *file) |
| { |
| if (test_and_set_bit(0, &pnx833x_wdt_alive)) |
| return -EBUSY; |
| |
| if (nowayout) |
| __module_get(THIS_MODULE); |
| |
| /* Activate timer */ |
| if (!start_enabled) |
| pnx833x_wdt_start(); |
| |
| pnx833x_wdt_ping(); |
| |
| printk(KERN_INFO "Started watchdog timer.\n"); |
| |
| return nonseekable_open(inode, file); |
| } |
| |
| static int pnx833x_wdt_release(struct inode *inode, struct file *file) |
| { |
| /* Shut off the timer. |
| * Lock it in if it's a module and we defined ...NOWAYOUT */ |
| if (!nowayout) |
| pnx833x_wdt_stop(); /* Turn the WDT off */ |
| |
| clear_bit(0, &pnx833x_wdt_alive); |
| return 0; |
| } |
| |
| static ssize_t pnx833x_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) |
| { |
| /* Refresh the timer. */ |
| if (len) |
| pnx833x_wdt_ping(); |
| |
| return len; |
| } |
| |
| static long pnx833x_wdt_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| int options, new_timeout = 0; |
| uint32_t timeout, timeout_left = 0; |
| |
| static struct watchdog_info ident = { |
| .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, |
| .firmware_version = 0, |
| .identity = "Hardware Watchdog for PNX833x", |
| }; |
| |
| switch (cmd) { |
| default: |
| return -ENOTTY; |
| |
| case WDIOC_GETSUPPORT: |
| if (copy_to_user((struct watchdog_info *)arg, |
| &ident, sizeof(ident))) |
| return -EFAULT; |
| return 0; |
| |
| case WDIOC_GETSTATUS: |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(0, (int *)arg); |
| |
| case WDIOC_SETOPTIONS: |
| if (get_user(options, (int *)arg)) |
| return -EFAULT; |
| |
| if (options & WDIOS_DISABLECARD) |
| pnx833x_wdt_stop(); |
| |
| if (options & WDIOS_ENABLECARD) |
| pnx833x_wdt_start(); |
| |
| return 0; |
| |
| case WDIOC_KEEPALIVE: |
| pnx833x_wdt_ping(); |
| return 0; |
| |
| case WDIOC_SETTIMEOUT: |
| { |
| if (get_user(new_timeout, (int *)arg)) |
| return -EFAULT; |
| |
| pnx833x_wdt_timeout = new_timeout; |
| PNX833X_REG(PNX833X_CONFIG + |
| PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = new_timeout; |
| return put_user(new_timeout, (int *)arg); |
| } |
| |
| case WDIOC_GETTIMEOUT: |
| timeout = PNX833X_REG(PNX833X_CONFIG + |
| PNX833X_CONFIG_CPU_WATCHDOG_COMPARE); |
| return put_user(timeout, (int *)arg); |
| |
| case WDIOC_GETTIMELEFT: |
| timeout_left = PNX833X_REG(PNX833X_CONFIG + |
| PNX833X_CONFIG_CPU_WATCHDOG); |
| return put_user(timeout_left, (int *)arg); |
| |
| } |
| } |
| |
| static int pnx833x_wdt_notify_sys(struct notifier_block *this, |
| unsigned long code, void *unused) |
| { |
| if (code == SYS_DOWN || code == SYS_HALT) |
| pnx833x_wdt_stop(); /* Turn the WDT off */ |
| |
| return NOTIFY_DONE; |
| } |
| |
| static const struct file_operations pnx833x_wdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = pnx833x_wdt_write, |
| .unlocked_ioctl = pnx833x_wdt_ioctl, |
| .open = pnx833x_wdt_open, |
| .release = pnx833x_wdt_release, |
| }; |
| |
| static struct miscdevice pnx833x_wdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &pnx833x_wdt_fops, |
| }; |
| |
| static struct notifier_block pnx833x_wdt_notifier = { |
| .notifier_call = pnx833x_wdt_notify_sys, |
| }; |
| |
| static char banner[] __initdata = |
| KERN_INFO PFX "Hardware Watchdog Timer for PNX833x: Version 0.1\n"; |
| |
| static int __init watchdog_init(void) |
| { |
| int ret, cause; |
| |
| /* Lets check the reason for the reset.*/ |
| cause = PNX833X_REG(PNX833X_RESET); |
| /*If bit 31 is set then watchdog was cause of reset.*/ |
| if (cause & 0x80000000) { |
| printk(KERN_INFO PFX "The system was previously reset due to " |
| "the watchdog firing - please investigate...\n"); |
| } |
| |
| ret = register_reboot_notifier(&pnx833x_wdt_notifier); |
| if (ret) { |
| printk(KERN_ERR PFX |
| "cannot register reboot notifier (err=%d)\n", ret); |
| return ret; |
| } |
| |
| ret = misc_register(&pnx833x_wdt_miscdev); |
| if (ret) { |
| printk(KERN_ERR PFX |
| "cannot register miscdev on minor=%d (err=%d)\n", |
| WATCHDOG_MINOR, ret); |
| unregister_reboot_notifier(&pnx833x_wdt_notifier); |
| return ret; |
| } |
| |
| printk(banner); |
| if (start_enabled) |
| pnx833x_wdt_start(); |
| |
| return 0; |
| } |
| |
| static void __exit watchdog_exit(void) |
| { |
| misc_deregister(&pnx833x_wdt_miscdev); |
| unregister_reboot_notifier(&pnx833x_wdt_notifier); |
| } |
| |
| module_init(watchdog_init); |
| module_exit(watchdog_exit); |
| |
| MODULE_AUTHOR("Daniel Laird/Andre McCurdy"); |
| MODULE_DESCRIPTION("Hardware Watchdog Device for PNX833x"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |