| /* |
| * Frame buffer device for IBM GXT4500P and GXT6000P display adaptors |
| * |
| * Copyright (C) 2006 Paul Mackerras, IBM Corp. <paulus@samba.org> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/fb.h> |
| #include <linux/console.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/delay.h> |
| #include <linux/string.h> |
| |
| #define PCI_DEVICE_ID_IBM_GXT4500P 0x21c |
| #define PCI_DEVICE_ID_IBM_GXT6000P 0x170 |
| |
| /* GXT4500P registers */ |
| |
| /* Registers in PCI config space */ |
| #define CFG_ENDIAN0 0x40 |
| |
| /* Misc control/status registers */ |
| #define STATUS 0x1000 |
| #define CTRL_REG0 0x1004 |
| #define CR0_HALT_DMA 0x4 |
| #define CR0_RASTER_RESET 0x8 |
| #define CR0_GEOM_RESET 0x10 |
| #define CR0_MEM_CTRLER_RESET 0x20 |
| |
| /* Framebuffer control registers */ |
| #define FB_AB_CTRL 0x1100 |
| #define FB_CD_CTRL 0x1104 |
| #define FB_WID_CTRL 0x1108 |
| #define FB_Z_CTRL 0x110c |
| #define FB_VGA_CTRL 0x1110 |
| #define REFRESH_AB_CTRL 0x1114 |
| #define REFRESH_CD_CTRL 0x1118 |
| #define FB_OVL_CTRL 0x111c |
| #define FB_CTRL_TYPE 0x80000000 |
| #define FB_CTRL_WIDTH_MASK 0x007f0000 |
| #define FB_CTRL_WIDTH_SHIFT 16 |
| #define FB_CTRL_START_SEG_MASK 0x00003fff |
| |
| #define REFRESH_START 0x1098 |
| #define REFRESH_SIZE 0x109c |
| |
| /* "Direct" framebuffer access registers */ |
| #define DFA_FB_A 0x11e0 |
| #define DFA_FB_B 0x11e4 |
| #define DFA_FB_C 0x11e8 |
| #define DFA_FB_D 0x11ec |
| #define DFA_FB_ENABLE 0x80000000 |
| #define DFA_FB_BASE_MASK 0x03f00000 |
| #define DFA_FB_STRIDE_1k 0x00000000 |
| #define DFA_FB_STRIDE_2k 0x00000010 |
| #define DFA_FB_STRIDE_4k 0x00000020 |
| #define DFA_PIX_8BIT 0x00000000 |
| #define DFA_PIX_16BIT_565 0x00000001 |
| #define DFA_PIX_16BIT_1555 0x00000002 |
| #define DFA_PIX_24BIT 0x00000004 |
| #define DFA_PIX_32BIT 0x00000005 |
| |
| /* maps DFA_PIX_* to pixel size in bytes */ |
| static const unsigned char pixsize[] = { |
| 1, 2, 2, 2, 4, 4 |
| }; |
| |
| /* Display timing generator registers */ |
| #define DTG_CONTROL 0x1900 |
| #define DTG_CTL_SCREEN_REFRESH 2 |
| #define DTG_CTL_ENABLE 1 |
| #define DTG_HORIZ_EXTENT 0x1904 |
| #define DTG_HORIZ_DISPLAY 0x1908 |
| #define DTG_HSYNC_START 0x190c |
| #define DTG_HSYNC_END 0x1910 |
| #define DTG_HSYNC_END_COMP 0x1914 |
| #define DTG_VERT_EXTENT 0x1918 |
| #define DTG_VERT_DISPLAY 0x191c |
| #define DTG_VSYNC_START 0x1920 |
| #define DTG_VSYNC_END 0x1924 |
| #define DTG_VERT_SHORT 0x1928 |
| |
| /* PLL/RAMDAC registers */ |
| #define DISP_CTL 0x402c |
| #define DISP_CTL_OFF 2 |
| #define SYNC_CTL 0x4034 |
| #define SYNC_CTL_SYNC_ON_RGB 1 |
| #define SYNC_CTL_SYNC_OFF 2 |
| #define SYNC_CTL_HSYNC_INV 8 |
| #define SYNC_CTL_VSYNC_INV 0x10 |
| #define SYNC_CTL_HSYNC_OFF 0x20 |
| #define SYNC_CTL_VSYNC_OFF 0x40 |
| |
| #define PLL_M 0x4040 |
| #define PLL_N 0x4044 |
| #define PLL_POSTDIV 0x4048 |
| #define PLL_C 0x404c |
| |
| /* Hardware cursor */ |
| #define CURSOR_X 0x4078 |
| #define CURSOR_Y 0x407c |
| #define CURSOR_HOTSPOT 0x4080 |
| #define CURSOR_MODE 0x4084 |
| #define CURSOR_MODE_OFF 0 |
| #define CURSOR_MODE_4BPP 1 |
| #define CURSOR_PIXMAP 0x5000 |
| #define CURSOR_CMAP 0x7400 |
| |
| /* Window attribute table */ |
| #define WAT_FMT 0x4100 |
| #define WAT_FMT_24BIT 0 |
| #define WAT_FMT_16BIT_565 1 |
| #define WAT_FMT_16BIT_1555 2 |
| #define WAT_FMT_32BIT 3 /* 0 vs. 3 is a guess */ |
| #define WAT_FMT_8BIT_332 9 |
| #define WAT_FMT_8BIT 0xa |
| #define WAT_FMT_NO_CMAP 4 /* ORd in to other values */ |
| #define WAT_CMAP_OFFSET 0x4104 /* 4-bit value gets << 6 */ |
| #define WAT_CTRL 0x4108 |
| #define WAT_CTRL_SEL_B 1 /* select B buffer if 1 */ |
| #define WAT_CTRL_NO_INC 2 |
| #define WAT_GAMMA_CTRL 0x410c |
| #define WAT_GAMMA_DISABLE 1 /* disables gamma cmap */ |
| #define WAT_OVL_CTRL 0x430c /* controls overlay */ |
| |
| /* Indexed by DFA_PIX_* values */ |
| static const unsigned char watfmt[] = { |
| WAT_FMT_8BIT, WAT_FMT_16BIT_565, WAT_FMT_16BIT_1555, 0, |
| WAT_FMT_24BIT, WAT_FMT_32BIT |
| }; |
| |
| /* Colormap array; 1k entries of 4 bytes each */ |
| #define CMAP 0x6000 |
| |
| #define readreg(par, reg) readl((par)->regs + (reg)) |
| #define writereg(par, reg, val) writel((val), (par)->regs + (reg)) |
| |
| struct gxt4500_par { |
| void __iomem *regs; |
| |
| int pixfmt; /* pixel format, see DFA_PIX_* values */ |
| |
| /* PLL parameters */ |
| int refclk_ps; /* ref clock period in picoseconds */ |
| int pll_m; /* ref clock divisor */ |
| int pll_n; /* VCO divisor */ |
| int pll_pd1; /* first post-divisor */ |
| int pll_pd2; /* second post-divisor */ |
| |
| u32 pseudo_palette[16]; /* used in color blits */ |
| }; |
| |
| /* mode requested by user */ |
| static char *mode_option; |
| |
| /* default mode: 1280x1024 @ 60 Hz, 8 bpp */ |
| static const struct fb_videomode defaultmode __devinitdata = { |
| .refresh = 60, |
| .xres = 1280, |
| .yres = 1024, |
| .pixclock = 9295, |
| .left_margin = 248, |
| .right_margin = 48, |
| .upper_margin = 38, |
| .lower_margin = 1, |
| .hsync_len = 112, |
| .vsync_len = 3, |
| .vmode = FB_VMODE_NONINTERLACED |
| }; |
| |
| /* List of supported cards */ |
| enum gxt_cards { |
| GXT4500P, |
| GXT6000P |
| }; |
| |
| /* Card-specific information */ |
| static const struct cardinfo { |
| int refclk_ps; /* period of PLL reference clock in ps */ |
| const char *cardname; |
| } cardinfo[] = { |
| [GXT4500P] = { .refclk_ps = 9259, .cardname = "IBM GXT4500P" }, |
| [GXT6000P] = { .refclk_ps = 40000, .cardname = "IBM GXT6000P" }, |
| }; |
| |
| /* |
| * The refclk and VCO dividers appear to use a linear feedback shift |
| * register, which gets reloaded when it reaches a terminal value, at |
| * which point the divider output is toggled. Thus one can obtain |
| * whatever divisor is required by putting the appropriate value into |
| * the reload register. For a divisor of N, one puts the value from |
| * the LFSR sequence that comes N-1 places before the terminal value |
| * into the reload register. |
| */ |
| |
| static const unsigned char mdivtab[] = { |
| /* 1 */ 0x3f, 0x00, 0x20, 0x10, 0x28, 0x14, 0x2a, 0x15, 0x0a, |
| /* 10 */ 0x25, 0x32, 0x19, 0x0c, 0x26, 0x13, 0x09, 0x04, 0x22, 0x11, |
| /* 20 */ 0x08, 0x24, 0x12, 0x29, 0x34, 0x1a, 0x2d, 0x36, 0x1b, 0x0d, |
| /* 30 */ 0x06, 0x23, 0x31, 0x38, 0x1c, 0x2e, 0x17, 0x0b, 0x05, 0x02, |
| /* 40 */ 0x21, 0x30, 0x18, 0x2c, 0x16, 0x2b, 0x35, 0x3a, 0x1d, 0x0e, |
| /* 50 */ 0x27, 0x33, 0x39, 0x3c, 0x1e, 0x2f, 0x37, 0x3b, 0x3d, 0x3e, |
| /* 60 */ 0x1f, 0x0f, 0x07, 0x03, 0x01, |
| }; |
| |
| static const unsigned char ndivtab[] = { |
| /* 2 */ 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0x78, 0xbc, 0x5e, |
| /* 10 */ 0x2f, 0x17, 0x0b, 0x85, 0xc2, 0xe1, 0x70, 0x38, 0x9c, 0x4e, |
| /* 20 */ 0xa7, 0xd3, 0xe9, 0xf4, 0xfa, 0xfd, 0xfe, 0x7f, 0xbf, 0xdf, |
| /* 30 */ 0xef, 0x77, 0x3b, 0x1d, 0x8e, 0xc7, 0xe3, 0x71, 0xb8, 0xdc, |
| /* 40 */ 0x6e, 0xb7, 0x5b, 0x2d, 0x16, 0x8b, 0xc5, 0xe2, 0xf1, 0xf8, |
| /* 50 */ 0xfc, 0x7e, 0x3f, 0x9f, 0xcf, 0x67, 0xb3, 0xd9, 0x6c, 0xb6, |
| /* 60 */ 0xdb, 0x6d, 0x36, 0x9b, 0x4d, 0x26, 0x13, 0x89, 0xc4, 0x62, |
| /* 70 */ 0xb1, 0xd8, 0xec, 0xf6, 0xfb, 0x7d, 0xbe, 0x5f, 0xaf, 0x57, |
| /* 80 */ 0x2b, 0x95, 0x4a, 0x25, 0x92, 0x49, 0xa4, 0x52, 0x29, 0x94, |
| /* 90 */ 0xca, 0x65, 0xb2, 0x59, 0x2c, 0x96, 0xcb, 0xe5, 0xf2, 0x79, |
| /* 100 */ 0x3c, 0x1e, 0x0f, 0x07, 0x83, 0x41, 0x20, 0x90, 0x48, 0x24, |
| /* 110 */ 0x12, 0x09, 0x84, 0x42, 0xa1, 0x50, 0x28, 0x14, 0x8a, 0x45, |
| /* 120 */ 0xa2, 0xd1, 0xe8, 0x74, 0xba, 0xdd, 0xee, 0xf7, 0x7b, 0x3d, |
| /* 130 */ 0x9e, 0x4f, 0x27, 0x93, 0xc9, 0xe4, 0x72, 0x39, 0x1c, 0x0e, |
| /* 140 */ 0x87, 0xc3, 0x61, 0x30, 0x18, 0x8c, 0xc6, 0x63, 0x31, 0x98, |
| /* 150 */ 0xcc, 0xe6, 0x73, 0xb9, 0x5c, 0x2e, 0x97, 0x4b, 0xa5, 0xd2, |
| /* 160 */ 0x69, |
| }; |
| |
| static int calc_pll(int period_ps, struct gxt4500_par *par) |
| { |
| int m, n, pdiv1, pdiv2, postdiv; |
| int pll_period, best_error, t, intf; |
| |
| /* only deal with range 5MHz - 300MHz */ |
| if (period_ps < 3333 || period_ps > 200000) |
| return -1; |
| |
| best_error = 1000000; |
| for (pdiv1 = 1; pdiv1 <= 8; ++pdiv1) { |
| for (pdiv2 = 1; pdiv2 <= pdiv1; ++pdiv2) { |
| postdiv = pdiv1 * pdiv2; |
| pll_period = DIV_ROUND_UP(period_ps, postdiv); |
| /* keep pll in range 350..600 MHz */ |
| if (pll_period < 1666 || pll_period > 2857) |
| continue; |
| for (m = 1; m <= 64; ++m) { |
| intf = m * par->refclk_ps; |
| if (intf > 500000) |
| break; |
| n = intf * postdiv / period_ps; |
| if (n < 3 || n > 160) |
| continue; |
| t = par->refclk_ps * m * postdiv / n; |
| t -= period_ps; |
| if (t >= 0 && t < best_error) { |
| par->pll_m = m; |
| par->pll_n = n; |
| par->pll_pd1 = pdiv1; |
| par->pll_pd2 = pdiv2; |
| best_error = t; |
| } |
| } |
| } |
| } |
| if (best_error == 1000000) |
| return -1; |
| return 0; |
| } |
| |
| static int calc_pixclock(struct gxt4500_par *par) |
| { |
| return par->refclk_ps * par->pll_m * par->pll_pd1 * par->pll_pd2 |
| / par->pll_n; |
| } |
| |
| static int gxt4500_var_to_par(struct fb_var_screeninfo *var, |
| struct gxt4500_par *par) |
| { |
| if (var->xres + var->xoffset > var->xres_virtual || |
| var->yres + var->yoffset > var->yres_virtual || |
| var->xres_virtual > 4096) |
| return -EINVAL; |
| if ((var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED) |
| return -EINVAL; |
| |
| if (calc_pll(var->pixclock, par) < 0) |
| return -EINVAL; |
| |
| switch (var->bits_per_pixel) { |
| case 32: |
| if (var->transp.length) |
| par->pixfmt = DFA_PIX_32BIT; |
| else |
| par->pixfmt = DFA_PIX_24BIT; |
| break; |
| case 24: |
| par->pixfmt = DFA_PIX_24BIT; |
| break; |
| case 16: |
| if (var->green.length == 5) |
| par->pixfmt = DFA_PIX_16BIT_1555; |
| else |
| par->pixfmt = DFA_PIX_16BIT_565; |
| break; |
| case 8: |
| par->pixfmt = DFA_PIX_8BIT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct fb_bitfield eightbits = {0, 8}; |
| static const struct fb_bitfield nobits = {0, 0}; |
| |
| static void gxt4500_unpack_pixfmt(struct fb_var_screeninfo *var, |
| int pixfmt) |
| { |
| var->bits_per_pixel = pixsize[pixfmt] * 8; |
| var->red = eightbits; |
| var->green = eightbits; |
| var->blue = eightbits; |
| var->transp = nobits; |
| |
| switch (pixfmt) { |
| case DFA_PIX_16BIT_565: |
| var->red.length = 5; |
| var->green.length = 6; |
| var->blue.length = 5; |
| break; |
| case DFA_PIX_16BIT_1555: |
| var->red.length = 5; |
| var->green.length = 5; |
| var->blue.length = 5; |
| var->transp.length = 1; |
| break; |
| case DFA_PIX_32BIT: |
| var->transp.length = 8; |
| break; |
| } |
| if (pixfmt != DFA_PIX_8BIT) { |
| var->green.offset = var->red.length; |
| var->blue.offset = var->green.offset + var->green.length; |
| if (var->transp.length) |
| var->transp.offset = |
| var->blue.offset + var->blue.length; |
| } |
| } |
| |
| static int gxt4500_check_var(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| struct gxt4500_par par; |
| int err; |
| |
| par = *(struct gxt4500_par *)info->par; |
| err = gxt4500_var_to_par(var, &par); |
| if (!err) { |
| var->pixclock = calc_pixclock(&par); |
| gxt4500_unpack_pixfmt(var, par.pixfmt); |
| } |
| return err; |
| } |
| |
| static int gxt4500_set_par(struct fb_info *info) |
| { |
| struct gxt4500_par *par = info->par; |
| struct fb_var_screeninfo *var = &info->var; |
| int err; |
| u32 ctrlreg, tmp; |
| unsigned int dfa_ctl, pixfmt, stride; |
| unsigned int wid_tiles, i; |
| unsigned int prefetch_pix, htot; |
| struct gxt4500_par save_par; |
| |
| save_par = *par; |
| err = gxt4500_var_to_par(var, par); |
| if (err) { |
| *par = save_par; |
| return err; |
| } |
| |
| /* turn off DTG for now */ |
| ctrlreg = readreg(par, DTG_CONTROL); |
| ctrlreg &= ~(DTG_CTL_ENABLE | DTG_CTL_SCREEN_REFRESH); |
| writereg(par, DTG_CONTROL, ctrlreg); |
| |
| /* set PLL registers */ |
| tmp = readreg(par, PLL_C) & ~0x7f; |
| if (par->pll_n < 38) |
| tmp |= 0x29; |
| if (par->pll_n < 69) |
| tmp |= 0x35; |
| else if (par->pll_n < 100) |
| tmp |= 0x76; |
| else |
| tmp |= 0x7e; |
| writereg(par, PLL_C, tmp); |
| writereg(par, PLL_M, mdivtab[par->pll_m - 1]); |
| writereg(par, PLL_N, ndivtab[par->pll_n - 2]); |
| tmp = ((8 - par->pll_pd2) << 3) | (8 - par->pll_pd1); |
| if (par->pll_pd1 == 8 || par->pll_pd2 == 8) { |
| /* work around erratum */ |
| writereg(par, PLL_POSTDIV, tmp | 0x9); |
| udelay(1); |
| } |
| writereg(par, PLL_POSTDIV, tmp); |
| msleep(20); |
| |
| /* turn off hardware cursor */ |
| writereg(par, CURSOR_MODE, CURSOR_MODE_OFF); |
| |
| /* reset raster engine */ |
| writereg(par, CTRL_REG0, CR0_RASTER_RESET | (CR0_RASTER_RESET << 16)); |
| udelay(10); |
| writereg(par, CTRL_REG0, CR0_RASTER_RESET << 16); |
| |
| /* set display timing generator registers */ |
| htot = var->xres + var->left_margin + var->right_margin + |
| var->hsync_len; |
| writereg(par, DTG_HORIZ_EXTENT, htot - 1); |
| writereg(par, DTG_HORIZ_DISPLAY, var->xres - 1); |
| writereg(par, DTG_HSYNC_START, var->xres + var->right_margin - 1); |
| writereg(par, DTG_HSYNC_END, |
| var->xres + var->right_margin + var->hsync_len - 1); |
| writereg(par, DTG_HSYNC_END_COMP, |
| var->xres + var->right_margin + var->hsync_len - 1); |
| writereg(par, DTG_VERT_EXTENT, |
| var->yres + var->upper_margin + var->lower_margin + |
| var->vsync_len - 1); |
| writereg(par, DTG_VERT_DISPLAY, var->yres - 1); |
| writereg(par, DTG_VSYNC_START, var->yres + var->lower_margin - 1); |
| writereg(par, DTG_VSYNC_END, |
| var->yres + var->lower_margin + var->vsync_len - 1); |
| prefetch_pix = 3300000 / var->pixclock; |
| if (prefetch_pix >= htot) |
| prefetch_pix = htot - 1; |
| writereg(par, DTG_VERT_SHORT, htot - prefetch_pix - 1); |
| ctrlreg |= DTG_CTL_ENABLE | DTG_CTL_SCREEN_REFRESH; |
| writereg(par, DTG_CONTROL, ctrlreg); |
| |
| /* calculate stride in DFA aperture */ |
| if (var->xres_virtual > 2048) { |
| stride = 4096; |
| dfa_ctl = DFA_FB_STRIDE_4k; |
| } else if (var->xres_virtual > 1024) { |
| stride = 2048; |
| dfa_ctl = DFA_FB_STRIDE_2k; |
| } else { |
| stride = 1024; |
| dfa_ctl = DFA_FB_STRIDE_1k; |
| } |
| |
| /* Set up framebuffer definition */ |
| wid_tiles = (var->xres_virtual + 63) >> 6; |
| |
| /* XXX add proper FB allocation here someday */ |
| writereg(par, FB_AB_CTRL, FB_CTRL_TYPE | (wid_tiles << 16) | 0); |
| writereg(par, REFRESH_AB_CTRL, FB_CTRL_TYPE | (wid_tiles << 16) | 0); |
| writereg(par, FB_CD_CTRL, FB_CTRL_TYPE | (wid_tiles << 16) | 0); |
| writereg(par, REFRESH_CD_CTRL, FB_CTRL_TYPE | (wid_tiles << 16) | 0); |
| writereg(par, REFRESH_START, (var->xoffset << 16) | var->yoffset); |
| writereg(par, REFRESH_SIZE, (var->xres << 16) | var->yres); |
| |
| /* Set up framebuffer access by CPU */ |
| |
| pixfmt = par->pixfmt; |
| dfa_ctl |= DFA_FB_ENABLE | pixfmt; |
| writereg(par, DFA_FB_A, dfa_ctl); |
| |
| /* |
| * Set up window attribute table. |
| * We set all WAT entries the same so it doesn't matter what the |
| * window ID (WID) plane contains. |
| */ |
| for (i = 0; i < 32; ++i) { |
| writereg(par, WAT_FMT + (i << 4), watfmt[pixfmt]); |
| writereg(par, WAT_CMAP_OFFSET + (i << 4), 0); |
| writereg(par, WAT_CTRL + (i << 4), 0); |
| writereg(par, WAT_GAMMA_CTRL + (i << 4), WAT_GAMMA_DISABLE); |
| } |
| |
| /* Set sync polarity etc. */ |
| ctrlreg = readreg(par, SYNC_CTL) & |
| ~(SYNC_CTL_SYNC_ON_RGB | SYNC_CTL_HSYNC_INV | |
| SYNC_CTL_VSYNC_INV); |
| if (var->sync & FB_SYNC_ON_GREEN) |
| ctrlreg |= SYNC_CTL_SYNC_ON_RGB; |
| if (!(var->sync & FB_SYNC_HOR_HIGH_ACT)) |
| ctrlreg |= SYNC_CTL_HSYNC_INV; |
| if (!(var->sync & FB_SYNC_VERT_HIGH_ACT)) |
| ctrlreg |= SYNC_CTL_VSYNC_INV; |
| writereg(par, SYNC_CTL, ctrlreg); |
| |
| info->fix.line_length = stride * pixsize[pixfmt]; |
| info->fix.visual = (pixfmt == DFA_PIX_8BIT)? FB_VISUAL_PSEUDOCOLOR: |
| FB_VISUAL_DIRECTCOLOR; |
| |
| return 0; |
| } |
| |
| static int gxt4500_setcolreg(unsigned int reg, unsigned int red, |
| unsigned int green, unsigned int blue, |
| unsigned int transp, struct fb_info *info) |
| { |
| u32 cmap_entry; |
| struct gxt4500_par *par = info->par; |
| |
| if (reg > 1023) |
| return 1; |
| cmap_entry = ((transp & 0xff00) << 16) | ((red & 0xff00) << 8) | |
| (green & 0xff00) | (blue >> 8); |
| writereg(par, CMAP + reg * 4, cmap_entry); |
| |
| if (reg < 16 && par->pixfmt != DFA_PIX_8BIT) { |
| u32 *pal = info->pseudo_palette; |
| u32 val = reg; |
| switch (par->pixfmt) { |
| case DFA_PIX_16BIT_565: |
| val |= (reg << 11) | (reg << 6); |
| break; |
| case DFA_PIX_16BIT_1555: |
| val |= (reg << 10) | (reg << 5); |
| break; |
| case DFA_PIX_32BIT: |
| val |= (reg << 24); |
| /* fall through */ |
| case DFA_PIX_24BIT: |
| val |= (reg << 16) | (reg << 8); |
| break; |
| } |
| pal[reg] = val; |
| } |
| |
| return 0; |
| } |
| |
| static int gxt4500_pan_display(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| struct gxt4500_par *par = info->par; |
| |
| if (var->xoffset & 7) |
| return -EINVAL; |
| if (var->xoffset + var->xres > var->xres_virtual || |
| var->yoffset + var->yres > var->yres_virtual) |
| return -EINVAL; |
| |
| writereg(par, REFRESH_START, (var->xoffset << 16) | var->yoffset); |
| return 0; |
| } |
| |
| static int gxt4500_blank(int blank, struct fb_info *info) |
| { |
| struct gxt4500_par *par = info->par; |
| int ctrl, dctl; |
| |
| ctrl = readreg(par, SYNC_CTL); |
| ctrl &= ~(SYNC_CTL_SYNC_OFF | SYNC_CTL_HSYNC_OFF | SYNC_CTL_VSYNC_OFF); |
| dctl = readreg(par, DISP_CTL); |
| dctl |= DISP_CTL_OFF; |
| switch (blank) { |
| case FB_BLANK_UNBLANK: |
| dctl &= ~DISP_CTL_OFF; |
| break; |
| case FB_BLANK_POWERDOWN: |
| ctrl |= SYNC_CTL_SYNC_OFF; |
| break; |
| case FB_BLANK_HSYNC_SUSPEND: |
| ctrl |= SYNC_CTL_HSYNC_OFF; |
| break; |
| case FB_BLANK_VSYNC_SUSPEND: |
| ctrl |= SYNC_CTL_VSYNC_OFF; |
| break; |
| default: ; |
| } |
| writereg(par, SYNC_CTL, ctrl); |
| writereg(par, DISP_CTL, dctl); |
| |
| return 0; |
| } |
| |
| static const struct fb_fix_screeninfo gxt4500_fix __devinitdata = { |
| .id = "IBM GXT4500P", |
| .type = FB_TYPE_PACKED_PIXELS, |
| .visual = FB_VISUAL_PSEUDOCOLOR, |
| .xpanstep = 8, |
| .ypanstep = 1, |
| .mmio_len = 0x20000, |
| }; |
| |
| static struct fb_ops gxt4500_ops = { |
| .owner = THIS_MODULE, |
| .fb_check_var = gxt4500_check_var, |
| .fb_set_par = gxt4500_set_par, |
| .fb_setcolreg = gxt4500_setcolreg, |
| .fb_pan_display = gxt4500_pan_display, |
| .fb_blank = gxt4500_blank, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| }; |
| |
| /* PCI functions */ |
| static int __devinit gxt4500_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| int err; |
| unsigned long reg_phys, fb_phys; |
| struct gxt4500_par *par; |
| struct fb_info *info; |
| struct fb_var_screeninfo var; |
| enum gxt_cards cardtype; |
| |
| err = pci_enable_device(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "gxt4500: cannot enable PCI device: %d\n", |
| err); |
| return err; |
| } |
| |
| reg_phys = pci_resource_start(pdev, 0); |
| if (!request_mem_region(reg_phys, pci_resource_len(pdev, 0), |
| "gxt4500 regs")) { |
| dev_err(&pdev->dev, "gxt4500: cannot get registers\n"); |
| goto err_nodev; |
| } |
| |
| fb_phys = pci_resource_start(pdev, 1); |
| if (!request_mem_region(fb_phys, pci_resource_len(pdev, 1), |
| "gxt4500 FB")) { |
| dev_err(&pdev->dev, "gxt4500: cannot get framebuffer\n"); |
| goto err_free_regs; |
| } |
| |
| info = framebuffer_alloc(sizeof(struct gxt4500_par), &pdev->dev); |
| if (!info) { |
| dev_err(&pdev->dev, "gxt4500: cannot alloc FB info record\n"); |
| goto err_free_fb; |
| } |
| par = info->par; |
| cardtype = ent->driver_data; |
| par->refclk_ps = cardinfo[cardtype].refclk_ps; |
| info->fix = gxt4500_fix; |
| strlcpy(info->fix.id, cardinfo[cardtype].cardname, |
| sizeof(info->fix.id)); |
| info->pseudo_palette = par->pseudo_palette; |
| |
| info->fix.mmio_start = reg_phys; |
| par->regs = pci_ioremap_bar(pdev, 0); |
| if (!par->regs) { |
| dev_err(&pdev->dev, "gxt4500: cannot map registers\n"); |
| goto err_free_all; |
| } |
| |
| info->fix.smem_start = fb_phys; |
| info->fix.smem_len = pci_resource_len(pdev, 1); |
| info->screen_base = pci_ioremap_bar(pdev, 1); |
| if (!info->screen_base) { |
| dev_err(&pdev->dev, "gxt4500: cannot map framebuffer\n"); |
| goto err_unmap_regs; |
| } |
| |
| pci_set_drvdata(pdev, info); |
| |
| /* Set byte-swapping for DFA aperture for all pixel sizes */ |
| pci_write_config_dword(pdev, CFG_ENDIAN0, 0x333300); |
| |
| info->fbops = &gxt4500_ops; |
| info->flags = FBINFO_FLAG_DEFAULT; |
| |
| err = fb_alloc_cmap(&info->cmap, 256, 0); |
| if (err) { |
| dev_err(&pdev->dev, "gxt4500: cannot allocate cmap\n"); |
| goto err_unmap_all; |
| } |
| |
| gxt4500_blank(FB_BLANK_UNBLANK, info); |
| |
| if (!fb_find_mode(&var, info, mode_option, NULL, 0, &defaultmode, 8)) { |
| dev_err(&pdev->dev, "gxt4500: cannot find valid video mode\n"); |
| goto err_free_cmap; |
| } |
| info->var = var; |
| if (gxt4500_set_par(info)) { |
| printk(KERN_ERR "gxt4500: cannot set video mode\n"); |
| goto err_free_cmap; |
| } |
| |
| if (register_framebuffer(info) < 0) { |
| dev_err(&pdev->dev, "gxt4500: cannot register framebuffer\n"); |
| goto err_free_cmap; |
| } |
| printk(KERN_INFO "fb%d: %s frame buffer device\n", |
| info->node, info->fix.id); |
| |
| return 0; |
| |
| err_free_cmap: |
| fb_dealloc_cmap(&info->cmap); |
| err_unmap_all: |
| iounmap(info->screen_base); |
| err_unmap_regs: |
| iounmap(par->regs); |
| err_free_all: |
| framebuffer_release(info); |
| err_free_fb: |
| release_mem_region(fb_phys, pci_resource_len(pdev, 1)); |
| err_free_regs: |
| release_mem_region(reg_phys, pci_resource_len(pdev, 0)); |
| err_nodev: |
| return -ENODEV; |
| } |
| |
| static void __devexit gxt4500_remove(struct pci_dev *pdev) |
| { |
| struct fb_info *info = pci_get_drvdata(pdev); |
| struct gxt4500_par *par; |
| |
| if (!info) |
| return; |
| par = info->par; |
| unregister_framebuffer(info); |
| fb_dealloc_cmap(&info->cmap); |
| iounmap(par->regs); |
| iounmap(info->screen_base); |
| release_mem_region(pci_resource_start(pdev, 0), |
| pci_resource_len(pdev, 0)); |
| release_mem_region(pci_resource_start(pdev, 1), |
| pci_resource_len(pdev, 1)); |
| framebuffer_release(info); |
| } |
| |
| /* supported chipsets */ |
| static const struct pci_device_id gxt4500_pci_tbl[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_GXT4500P), |
| .driver_data = GXT4500P }, |
| { PCI_DEVICE(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_GXT6000P), |
| .driver_data = GXT6000P }, |
| { 0 } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, gxt4500_pci_tbl); |
| |
| static struct pci_driver gxt4500_driver = { |
| .name = "gxt4500", |
| .id_table = gxt4500_pci_tbl, |
| .probe = gxt4500_probe, |
| .remove = __devexit_p(gxt4500_remove), |
| }; |
| |
| static int __devinit gxt4500_init(void) |
| { |
| #ifndef MODULE |
| if (fb_get_options("gxt4500", &mode_option)) |
| return -ENODEV; |
| #endif |
| |
| return pci_register_driver(&gxt4500_driver); |
| } |
| module_init(gxt4500_init); |
| |
| static void __exit gxt4500_exit(void) |
| { |
| pci_unregister_driver(&gxt4500_driver); |
| } |
| module_exit(gxt4500_exit); |
| |
| MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>"); |
| MODULE_DESCRIPTION("FBDev driver for IBM GXT4500P/6000P"); |
| MODULE_LICENSE("GPL"); |
| module_param(mode_option, charp, 0); |
| MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\""); |