| comment "S/390 character device drivers" |
| depends on S390 |
| |
| config TN3270 |
| tristate "Support for locally attached 3270 terminals" |
| depends on CCW |
| help |
| Include support for IBM 3270 terminals. |
| |
| config TN3270_TTY |
| tristate "Support for tty input/output on 3270 terminals" |
| depends on TN3270 |
| help |
| Include support for using an IBM 3270 terminal as a Linux tty. |
| |
| config TN3270_FS |
| tristate "Support for fullscreen applications on 3270 terminals" |
| depends on TN3270 |
| help |
| Include support for fullscreen applications on an IBM 3270 terminal. |
| |
| config TN3270_CONSOLE |
| bool "Support for console on 3270 terminal" |
| depends on TN3270=y && TN3270_TTY=y |
| help |
| Include support for using an IBM 3270 terminal as a Linux system |
| console. Available only if 3270 support is compiled in statically. |
| |
| config TN3215 |
| bool "Support for 3215 line mode terminal" |
| depends on CCW |
| help |
| Include support for IBM 3215 line-mode terminals. |
| |
| config TN3215_CONSOLE |
| bool "Support for console on 3215 line mode terminal" |
| depends on TN3215 |
| help |
| Include support for using an IBM 3215 line-mode terminal as a |
| Linux system console. |
| |
| config CCW_CONSOLE |
| bool |
| depends on TN3215_CONSOLE || TN3270_CONSOLE |
| default y |
| |
| config SCLP_TTY |
| bool "Support for SCLP line mode terminal" |
| depends on S390 |
| help |
| Include support for IBM SCLP line-mode terminals. |
| |
| config SCLP_CONSOLE |
| bool "Support for console on SCLP line mode terminal" |
| depends on SCLP_TTY |
| help |
| Include support for using an IBM HWC line-mode terminal as the Linux |
| system console. |
| |
| config SCLP_VT220_TTY |
| bool "Support for SCLP VT220-compatible terminal" |
| depends on S390 |
| help |
| Include support for an IBM SCLP VT220-compatible terminal. |
| |
| config SCLP_VT220_CONSOLE |
| bool "Support for console on SCLP VT220-compatible terminal" |
| depends on SCLP_VT220_TTY |
| help |
| Include support for using an IBM SCLP VT220-compatible terminal as a |
| Linux system console. |
| |
| config SCLP_CPI |
| tristate "Control-Program Identification" |
| depends on S390 |
| help |
| This option enables the hardware console interface for system |
| identification. This is commonly used for workload management and |
| gives you a nice name for the system on the service element. |
| Please select this option as a module since built-in operation is |
| completely untested. |
| You should only select this option if you know what you are doing, |
| need this feature and intend to run your kernel in LPAR. |
| |
| config SCLP_ASYNC |
| tristate "Support for Call Home via Asynchronous SCLP Records" |
| depends on S390 |
| help |
| This option enables the call home function, which is able to inform |
| the service element and connected organisations about a kernel panic. |
| You should only select this option if you know what you are doing, |
| want for inform other people about your kernel panics, |
| need this feature and intend to run your kernel in LPAR. |
| |
| config S390_TAPE |
| tristate "S/390 tape device support" |
| depends on CCW |
| help |
| Select this option if you want to access channel-attached tape |
| devices on IBM S/390 or zSeries. |
| If you select this option you will also want to select at |
| least one of the tape interface options and one of the tape |
| hardware options in order to access a tape device. |
| This option is also available as a module. The module will be |
| called tape390 and include all selected interfaces and |
| hardware drivers. |
| |
| comment "S/390 tape interface support" |
| depends on S390_TAPE |
| |
| config S390_TAPE_BLOCK |
| bool "Support for tape block devices" |
| depends on S390_TAPE && BLOCK |
| help |
| Select this option if you want to access your channel-attached tape |
| devices using the block device interface. This interface is similar |
| to CD-ROM devices on other platforms. The tapes can only be |
| accessed read-only when using this interface. Have a look at |
| <file:Documentation/s390/TAPE> for further information about creating |
| volumes for and using this interface. It is safe to say "Y" here. |
| |
| comment "S/390 tape hardware support" |
| depends on S390_TAPE |
| |
| config S390_TAPE_34XX |
| tristate "Support for 3480/3490 tape hardware" |
| depends on S390_TAPE |
| help |
| Select this option if you want to access IBM 3480/3490 magnetic |
| tape subsystems and 100% compatibles. |
| It is safe to say "Y" here. |
| |
| config S390_TAPE_3590 |
| tristate "Support for 3590 tape hardware" |
| depends on S390_TAPE |
| help |
| Select this option if you want to access IBM 3590 magnetic |
| tape subsystems and 100% compatibles. |
| It is safe to say "Y" here. |
| |
| config VMLOGRDR |
| tristate "Support for the z/VM recording system services (VM only)" |
| depends on IUCV |
| help |
| Select this option if you want to be able to receive records collected |
| by the z/VM recording system services, eg. from *LOGREC, *ACCOUNT or |
| *SYMPTOM. |
| This driver depends on the IUCV support driver. |
| |
| config VMCP |
| tristate "Support for the z/VM CP interface (VM only)" |
| depends on S390 |
| help |
| Select this option if you want to be able to interact with the control |
| program on z/VM |
| |
| |
| config MONREADER |
| tristate "API for reading z/VM monitor service records" |
| depends on IUCV |
| help |
| Character device driver for reading z/VM monitor service records |
| |
| config MONWRITER |
| tristate "API for writing z/VM monitor service records" |
| depends on S390 |
| default "m" |
| help |
| Character device driver for writing z/VM monitor service records |
| |
| config S390_VMUR |
| tristate "z/VM unit record device driver" |
| depends on S390 |
| default "m" |
| help |
| Character device driver for z/VM reader, puncher and printer. |
| |
