| /* |
| * Hardware definitions for the Toshiba eseries PDAs |
| * |
| * Copyright (c) 2003 Ian Molton <spyro@f2s.com> |
| * |
| * This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/gpio.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/setup.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach-types.h> |
| |
| #include <mach/pxa25x.h> |
| #include <mach/eseries-gpio.h> |
| #include <mach/udc.h> |
| #include <mach/irda.h> |
| |
| #include "generic.h" |
| #include "clock.h" |
| |
| /* Only e800 has 128MB RAM */ |
| void __init eseries_fixup(struct machine_desc *desc, |
| struct tag *tags, char **cmdline, struct meminfo *mi) |
| { |
| mi->nr_banks=1; |
| mi->bank[0].start = 0xa0000000; |
| mi->bank[0].node = 0; |
| if (machine_is_e800()) |
| mi->bank[0].size = (128*1024*1024); |
| else |
| mi->bank[0].size = (64*1024*1024); |
| } |
| |
| struct pxa2xx_udc_mach_info e7xx_udc_mach_info = { |
| .gpio_vbus = GPIO_E7XX_USB_DISC, |
| .gpio_pullup = GPIO_E7XX_USB_PULLUP, |
| .gpio_pullup_inverted = 1 |
| }; |
| |
| struct pxaficp_platform_data e7xx_ficp_platform_data = { |
| .gpio_pwdown = GPIO_E7XX_IR_OFF, |
| .transceiver_cap = IR_SIRMODE | IR_OFF, |
| }; |
| |
| int eseries_tmio_enable(struct platform_device *dev) |
| { |
| /* Reset - bring SUSPEND high before PCLR */ |
| gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0); |
| gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0); |
| msleep(1); |
| gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1); |
| msleep(1); |
| gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1); |
| msleep(1); |
| return 0; |
| } |
| |
| int eseries_tmio_disable(struct platform_device *dev) |
| { |
| gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0); |
| gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0); |
| return 0; |
| } |
| |
| int eseries_tmio_suspend(struct platform_device *dev) |
| { |
| gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0); |
| return 0; |
| } |
| |
| int eseries_tmio_resume(struct platform_device *dev) |
| { |
| gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1); |
| msleep(1); |
| return 0; |
| } |
| |
| void eseries_get_tmio_gpios(void) |
| { |
| gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL); |
| gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL); |
| gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0); |
| gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0); |
| } |
| |
| /* TMIO controller uses the same resources on all e-series machines. */ |
| struct resource eseries_tmio_resources[] = { |
| [0] = { |
| .start = PXA_CS4_PHYS, |
| .end = PXA_CS4_PHYS + 0x1fffff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ), |
| .end = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| /* Some e-series hardware cannot control the 32K clock */ |
| static void clk_32k_dummy(struct clk *clk) |
| { |
| } |
| |
| static const struct clkops clk_32k_dummy_ops = { |
| .enable = clk_32k_dummy, |
| .disable = clk_32k_dummy, |
| }; |
| |
| static struct clk tmio_dummy_clk = { |
| .ops = &clk_32k_dummy_ops, |
| .rate = 32768, |
| }; |
| |
| static struct clk_lookup eseries_clkregs[] = { |
| INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"), |
| }; |
| |
| void eseries_register_clks(void) |
| { |
| clks_register(eseries_clkregs, ARRAY_SIZE(eseries_clkregs)); |
| } |
| |