| /* |
| * drivers/media/radio/si470x/radio-si470x-common.c |
| * |
| * Driver for radios with Silicon Labs Si470x FM Radio Receivers |
| * |
| * Copyright (c) 2009 Tobias Lorenz <tobias.lorenz@gmx.net> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| |
| /* |
| * History: |
| * 2008-01-12 Tobias Lorenz <tobias.lorenz@gmx.net> |
| * Version 1.0.0 |
| * - First working version |
| * 2008-01-13 Tobias Lorenz <tobias.lorenz@gmx.net> |
| * Version 1.0.1 |
| * - Improved error handling, every function now returns errno |
| * - Improved multi user access (start/mute/stop) |
| * - Channel doesn't get lost anymore after start/mute/stop |
| * - RDS support added (polling mode via interrupt EP 1) |
| * - marked default module parameters with *value* |
| * - switched from bit structs to bit masks |
| * - header file cleaned and integrated |
| * 2008-01-14 Tobias Lorenz <tobias.lorenz@gmx.net> |
| * Version 1.0.2 |
| * - hex values are now lower case |
| * - commented USB ID for ADS/Tech moved on todo list |
| * - blacklisted si470x in hid-quirks.c |
| * - rds buffer handling functions integrated into *_work, *_read |
| * - rds_command in si470x_poll exchanged against simple retval |
| * - check for firmware version 15 |
| * - code order and prototypes still remain the same |
| * - spacing and bottom of band codes remain the same |
| * 2008-01-16 Tobias Lorenz <tobias.lorenz@gmx.net> |
| * Version 1.0.3 |
| * - code reordered to avoid function prototypes |
| * - switch/case defaults are now more user-friendly |
| * - unified comment style |
| * - applied all checkpatch.pl v1.12 suggestions |
| * except the warning about the too long lines with bit comments |
| * - renamed FMRADIO to RADIO to cut line length (checkpatch.pl) |
| * 2008-01-22 Tobias Lorenz <tobias.lorenz@gmx.net> |
| * Version 1.0.4 |
| * - avoid poss. locking when doing copy_to_user which may sleep |
| * - RDS is automatically activated on read now |
| * - code cleaned of unnecessary rds_commands |
| * - USB Vendor/Product ID for ADS/Tech FM Radio Receiver verified |
| * (thanks to Guillaume RAMOUSSE) |
| * 2008-01-27 Tobias Lorenz <tobias.lorenz@gmx.net> |
| * Version 1.0.5 |
| * - number of seek_retries changed to tune_timeout |
| * - fixed problem with incomplete tune operations by own buffers |
| * - optimization of variables and printf types |
| * - improved error logging |
| * 2008-01-31 Tobias Lorenz <tobias.lorenz@gmx.net> |
| * Oliver Neukum <oliver@neukum.org> |
| * Version 1.0.6 |
| * - fixed coverity checker warnings in *_usb_driver_disconnect |
| * - probe()/open() race by correct ordering in probe() |
| * - DMA coherency rules by separate allocation of all buffers |
| * - use of endianness macros |
| * - abuse of spinlock, replaced by mutex |
| * - racy handling of timer in disconnect, |
| * replaced by delayed_work |
| * - racy interruptible_sleep_on(), |
| * replaced with wait_event_interruptible() |
| * - handle signals in read() |
| * 2008-02-08 Tobias Lorenz <tobias.lorenz@gmx.net> |
| * Oliver Neukum <oliver@neukum.org> |
| * Version 1.0.7 |
| * - usb autosuspend support |
| * - unplugging fixed |
| * 2008-05-07 Tobias Lorenz <tobias.lorenz@gmx.net> |
| * Version 1.0.8 |
| * - hardware frequency seek support |
| * - afc indication |
| * - more safety checks, let si470x_get_freq return errno |
| * - vidioc behavior corrected according to v4l2 spec |
| * 2008-10-20 Alexey Klimov <klimov.linux@gmail.com> |
| * - add support for KWorld USB FM Radio FM700 |
| * - blacklisted KWorld radio in hid-core.c and hid-ids.h |
| * 2008-12-03 Mark Lord <mlord@pobox.com> |
| * - add support for DealExtreme USB Radio |
| * 2009-01-31 Bob Ross <pigiron@gmx.com> |
| * - correction of stereo detection/setting |
| * - correction of signal strength indicator scaling |
| * 2009-01-31 Rick Bronson <rick@efn.org> |
| * Tobias Lorenz <tobias.lorenz@gmx.net> |
| * - add LED status output |
| * - get HW/SW version from scratchpad |
| * 2009-06-16 Edouard Lafargue <edouard@lafargue.name> |
| * Version 1.0.10 |
| * - add support for interrupt mode for RDS endpoint, |
| * instead of polling. |
| * Improves RDS reception significantly |
| */ |
| |
| |
| /* kernel includes */ |
| #include "radio-si470x.h" |
| |
| |
| |
| /************************************************************************** |
| * Module Parameters |
| **************************************************************************/ |
| |
| /* Spacing (kHz) */ |
| /* 0: 200 kHz (USA, Australia) */ |
| /* 1: 100 kHz (Europe, Japan) */ |
| /* 2: 50 kHz */ |
| static unsigned short space = 2; |
| module_param(space, ushort, 0444); |
| MODULE_PARM_DESC(space, "Spacing: 0=200kHz 1=100kHz *2=50kHz*"); |
| |
| /* Bottom of Band (MHz) */ |
| /* 0: 87.5 - 108 MHz (USA, Europe)*/ |
| /* 1: 76 - 108 MHz (Japan wide band) */ |
| /* 2: 76 - 90 MHz (Japan) */ |
| static unsigned short band = 1; |
| module_param(band, ushort, 0444); |
| MODULE_PARM_DESC(band, "Band: 0=87.5..108MHz *1=76..108MHz* 2=76..90MHz"); |
| |
| /* De-emphasis */ |
| /* 0: 75 us (USA) */ |
| /* 1: 50 us (Europe, Australia, Japan) */ |
| static unsigned short de = 1; |
| module_param(de, ushort, 0444); |
| MODULE_PARM_DESC(de, "De-emphasis: 0=75us *1=50us*"); |
| |
| /* Tune timeout */ |
| static unsigned int tune_timeout = 3000; |
| module_param(tune_timeout, uint, 0644); |
| MODULE_PARM_DESC(tune_timeout, "Tune timeout: *3000*"); |
| |
| /* Seek timeout */ |
| static unsigned int seek_timeout = 5000; |
| module_param(seek_timeout, uint, 0644); |
| MODULE_PARM_DESC(seek_timeout, "Seek timeout: *5000*"); |
| |
| |
| |
| /************************************************************************** |
| * Generic Functions |
| **************************************************************************/ |
| |
| /* |
| * si470x_set_chan - set the channel |
| */ |
| static int si470x_set_chan(struct si470x_device *radio, unsigned short chan) |
| { |
| int retval; |
| unsigned long timeout; |
| bool timed_out = 0; |
| |
| /* start tuning */ |
| radio->registers[CHANNEL] &= ~CHANNEL_CHAN; |
| radio->registers[CHANNEL] |= CHANNEL_TUNE | chan; |
| retval = si470x_set_register(radio, CHANNEL); |
| if (retval < 0) |
| goto done; |
| |
| /* wait till tune operation has completed */ |
| timeout = jiffies + msecs_to_jiffies(tune_timeout); |
| do { |
| retval = si470x_get_register(radio, STATUSRSSI); |
| if (retval < 0) |
| goto stop; |
| timed_out = time_after(jiffies, timeout); |
| } while (((radio->registers[STATUSRSSI] & STATUSRSSI_STC) == 0) && |
| (!timed_out)); |
| if ((radio->registers[STATUSRSSI] & STATUSRSSI_STC) == 0) |
| dev_warn(&radio->videodev->dev, "tune does not complete\n"); |
| if (timed_out) |
| dev_warn(&radio->videodev->dev, |
| "tune timed out after %u ms\n", tune_timeout); |
| |
| stop: |
| /* stop tuning */ |
| radio->registers[CHANNEL] &= ~CHANNEL_TUNE; |
| retval = si470x_set_register(radio, CHANNEL); |
| |
| done: |
| return retval; |
| } |
| |
| |
| /* |
| * si470x_get_freq - get the frequency |
| */ |
| static int si470x_get_freq(struct si470x_device *radio, unsigned int *freq) |
| { |
| unsigned int spacing, band_bottom; |
| unsigned short chan; |
| int retval; |
| |
| /* Spacing (kHz) */ |
| switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_SPACE) >> 4) { |
| /* 0: 200 kHz (USA, Australia) */ |
| case 0: |
| spacing = 0.200 * FREQ_MUL; break; |
| /* 1: 100 kHz (Europe, Japan) */ |
| case 1: |
| spacing = 0.100 * FREQ_MUL; break; |
| /* 2: 50 kHz */ |
| default: |
| spacing = 0.050 * FREQ_MUL; break; |
| }; |
| |
| /* Bottom of Band (MHz) */ |
| switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_BAND) >> 6) { |
| /* 0: 87.5 - 108 MHz (USA, Europe) */ |
| case 0: |
| band_bottom = 87.5 * FREQ_MUL; break; |
| /* 1: 76 - 108 MHz (Japan wide band) */ |
| default: |
| band_bottom = 76 * FREQ_MUL; break; |
| /* 2: 76 - 90 MHz (Japan) */ |
| case 2: |
| band_bottom = 76 * FREQ_MUL; break; |
| }; |
| |
| /* read channel */ |
| retval = si470x_get_register(radio, READCHAN); |
| chan = radio->registers[READCHAN] & READCHAN_READCHAN; |
| |
| /* Frequency (MHz) = Spacing (kHz) x Channel + Bottom of Band (MHz) */ |
| *freq = chan * spacing + band_bottom; |
| |
| return retval; |
| } |
| |
| |
| /* |
| * si470x_set_freq - set the frequency |
| */ |
| int si470x_set_freq(struct si470x_device *radio, unsigned int freq) |
| { |
| unsigned int spacing, band_bottom; |
| unsigned short chan; |
| |
| /* Spacing (kHz) */ |
| switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_SPACE) >> 4) { |
| /* 0: 200 kHz (USA, Australia) */ |
| case 0: |
| spacing = 0.200 * FREQ_MUL; break; |
| /* 1: 100 kHz (Europe, Japan) */ |
| case 1: |
| spacing = 0.100 * FREQ_MUL; break; |
| /* 2: 50 kHz */ |
| default: |
| spacing = 0.050 * FREQ_MUL; break; |
| }; |
| |
| /* Bottom of Band (MHz) */ |
| switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_BAND) >> 6) { |
| /* 0: 87.5 - 108 MHz (USA, Europe) */ |
| case 0: |
| band_bottom = 87.5 * FREQ_MUL; break; |
| /* 1: 76 - 108 MHz (Japan wide band) */ |
| default: |
| band_bottom = 76 * FREQ_MUL; break; |
| /* 2: 76 - 90 MHz (Japan) */ |
| case 2: |
| band_bottom = 76 * FREQ_MUL; break; |
| }; |
| |
| /* Chan = [ Freq (Mhz) - Bottom of Band (MHz) ] / Spacing (kHz) */ |
| chan = (freq - band_bottom) / spacing; |
| |
| return si470x_set_chan(radio, chan); |
| } |
| |
| |
| /* |
| * si470x_set_seek - set seek |
| */ |
| static int si470x_set_seek(struct si470x_device *radio, |
| unsigned int wrap_around, unsigned int seek_upward) |
| { |
| int retval = 0; |
| unsigned long timeout; |
| bool timed_out = 0; |
| |
| /* start seeking */ |
| radio->registers[POWERCFG] |= POWERCFG_SEEK; |
| if (wrap_around == 1) |
| radio->registers[POWERCFG] &= ~POWERCFG_SKMODE; |
| else |
| radio->registers[POWERCFG] |= POWERCFG_SKMODE; |
| if (seek_upward == 1) |
| radio->registers[POWERCFG] |= POWERCFG_SEEKUP; |
| else |
| radio->registers[POWERCFG] &= ~POWERCFG_SEEKUP; |
| retval = si470x_set_register(radio, POWERCFG); |
| if (retval < 0) |
| goto done; |
| |
| /* wait till seek operation has completed */ |
| timeout = jiffies + msecs_to_jiffies(seek_timeout); |
| do { |
| retval = si470x_get_register(radio, STATUSRSSI); |
| if (retval < 0) |
| goto stop; |
| timed_out = time_after(jiffies, timeout); |
| } while (((radio->registers[STATUSRSSI] & STATUSRSSI_STC) == 0) && |
| (!timed_out)); |
| if ((radio->registers[STATUSRSSI] & STATUSRSSI_STC) == 0) |
| dev_warn(&radio->videodev->dev, "seek does not complete\n"); |
| if (radio->registers[STATUSRSSI] & STATUSRSSI_SF) |
| dev_warn(&radio->videodev->dev, |
| "seek failed / band limit reached\n"); |
| if (timed_out) |
| dev_warn(&radio->videodev->dev, |
| "seek timed out after %u ms\n", seek_timeout); |
| |
| stop: |
| /* stop seeking */ |
| radio->registers[POWERCFG] &= ~POWERCFG_SEEK; |
| retval = si470x_set_register(radio, POWERCFG); |
| |
| done: |
| /* try again, if timed out */ |
| if ((retval == 0) && timed_out) |
| retval = -EAGAIN; |
| |
| return retval; |
| } |
| |
| |
| /* |
| * si470x_start - switch on radio |
| */ |
| int si470x_start(struct si470x_device *radio) |
| { |
| int retval; |
| |
| /* powercfg */ |
| radio->registers[POWERCFG] = |
| POWERCFG_DMUTE | POWERCFG_ENABLE | POWERCFG_RDSM; |
| retval = si470x_set_register(radio, POWERCFG); |
| if (retval < 0) |
| goto done; |
| |
| /* sysconfig 1 */ |
| radio->registers[SYSCONFIG1] = SYSCONFIG1_DE; |
| retval = si470x_set_register(radio, SYSCONFIG1); |
| if (retval < 0) |
| goto done; |
| |
| /* sysconfig 2 */ |
| radio->registers[SYSCONFIG2] = |
| (0x3f << 8) | /* SEEKTH */ |
| ((band << 6) & SYSCONFIG2_BAND) | /* BAND */ |
| ((space << 4) & SYSCONFIG2_SPACE) | /* SPACE */ |
| 15; /* VOLUME (max) */ |
| retval = si470x_set_register(radio, SYSCONFIG2); |
| if (retval < 0) |
| goto done; |
| |
| /* reset last channel */ |
| retval = si470x_set_chan(radio, |
| radio->registers[CHANNEL] & CHANNEL_CHAN); |
| |
| done: |
| return retval; |
| } |
| |
| |
| /* |
| * si470x_stop - switch off radio |
| */ |
| int si470x_stop(struct si470x_device *radio) |
| { |
| int retval; |
| |
| /* sysconfig 1 */ |
| radio->registers[SYSCONFIG1] &= ~SYSCONFIG1_RDS; |
| retval = si470x_set_register(radio, SYSCONFIG1); |
| if (retval < 0) |
| goto done; |
| |
| /* powercfg */ |
| radio->registers[POWERCFG] &= ~POWERCFG_DMUTE; |
| /* POWERCFG_ENABLE has to automatically go low */ |
| radio->registers[POWERCFG] |= POWERCFG_ENABLE | POWERCFG_DISABLE; |
| retval = si470x_set_register(radio, POWERCFG); |
| |
| done: |
| return retval; |
| } |
| |
| |
| /* |
| * si470x_rds_on - switch on rds reception |
| */ |
| int si470x_rds_on(struct si470x_device *radio) |
| { |
| int retval; |
| |
| /* sysconfig 1 */ |
| mutex_lock(&radio->lock); |
| radio->registers[SYSCONFIG1] |= SYSCONFIG1_RDS; |
| retval = si470x_set_register(radio, SYSCONFIG1); |
| if (retval < 0) |
| radio->registers[SYSCONFIG1] &= ~SYSCONFIG1_RDS; |
| mutex_unlock(&radio->lock); |
| |
| return retval; |
| } |
| |
| |
| |
| /************************************************************************** |
| * Video4Linux Interface |
| **************************************************************************/ |
| |
| /* |
| * si470x_vidioc_queryctrl - enumerate control items |
| */ |
| static int si470x_vidioc_queryctrl(struct file *file, void *priv, |
| struct v4l2_queryctrl *qc) |
| { |
| struct si470x_device *radio = video_drvdata(file); |
| int retval = -EINVAL; |
| |
| /* abort if qc->id is below V4L2_CID_BASE */ |
| if (qc->id < V4L2_CID_BASE) |
| goto done; |
| |
| /* search video control */ |
| switch (qc->id) { |
| case V4L2_CID_AUDIO_VOLUME: |
| return v4l2_ctrl_query_fill(qc, 0, 15, 1, 15); |
| case V4L2_CID_AUDIO_MUTE: |
| return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); |
| } |
| |
| /* disable unsupported base controls */ |
| /* to satisfy kradio and such apps */ |
| if ((retval == -EINVAL) && (qc->id < V4L2_CID_LASTP1)) { |
| qc->flags = V4L2_CTRL_FLAG_DISABLED; |
| retval = 0; |
| } |
| |
| done: |
| if (retval < 0) |
| dev_warn(&radio->videodev->dev, |
| "query controls failed with %d\n", retval); |
| return retval; |
| } |
| |
| |
| /* |
| * si470x_vidioc_g_ctrl - get the value of a control |
| */ |
| static int si470x_vidioc_g_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct si470x_device *radio = video_drvdata(file); |
| int retval = 0; |
| |
| /* safety checks */ |
| retval = si470x_disconnect_check(radio); |
| if (retval) |
| goto done; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_VOLUME: |
| ctrl->value = radio->registers[SYSCONFIG2] & |
| SYSCONFIG2_VOLUME; |
| break; |
| case V4L2_CID_AUDIO_MUTE: |
| ctrl->value = ((radio->registers[POWERCFG] & |
| POWERCFG_DMUTE) == 0) ? 1 : 0; |
| break; |
| default: |
| retval = -EINVAL; |
| } |
| |
| done: |
| if (retval < 0) |
| dev_warn(&radio->videodev->dev, |
| "get control failed with %d\n", retval); |
| return retval; |
| } |
| |
| |
| /* |
| * si470x_vidioc_s_ctrl - set the value of a control |
| */ |
| static int si470x_vidioc_s_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct si470x_device *radio = video_drvdata(file); |
| int retval = 0; |
| |
| /* safety checks */ |
| retval = si470x_disconnect_check(radio); |
| if (retval) |
| goto done; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_VOLUME: |
| radio->registers[SYSCONFIG2] &= ~SYSCONFIG2_VOLUME; |
| radio->registers[SYSCONFIG2] |= ctrl->value; |
| retval = si470x_set_register(radio, SYSCONFIG2); |
| break; |
| case V4L2_CID_AUDIO_MUTE: |
| if (ctrl->value == 1) |
| radio->registers[POWERCFG] &= ~POWERCFG_DMUTE; |
| else |
| radio->registers[POWERCFG] |= POWERCFG_DMUTE; |
| retval = si470x_set_register(radio, POWERCFG); |
| break; |
| default: |
| retval = -EINVAL; |
| } |
| |
| done: |
| if (retval < 0) |
| dev_warn(&radio->videodev->dev, |
| "set control failed with %d\n", retval); |
| return retval; |
| } |
| |
| |
| /* |
| * si470x_vidioc_g_audio - get audio attributes |
| */ |
| static int si470x_vidioc_g_audio(struct file *file, void *priv, |
| struct v4l2_audio *audio) |
| { |
| /* driver constants */ |
| audio->index = 0; |
| strcpy(audio->name, "Radio"); |
| audio->capability = V4L2_AUDCAP_STEREO; |
| audio->mode = 0; |
| |
| return 0; |
| } |
| |
| |
| /* |
| * si470x_vidioc_g_tuner - get tuner attributes |
| */ |
| static int si470x_vidioc_g_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *tuner) |
| { |
| struct si470x_device *radio = video_drvdata(file); |
| int retval = 0; |
| |
| /* safety checks */ |
| retval = si470x_disconnect_check(radio); |
| if (retval) |
| goto done; |
| |
| if (tuner->index != 0) { |
| retval = -EINVAL; |
| goto done; |
| } |
| |
| retval = si470x_get_register(radio, STATUSRSSI); |
| if (retval < 0) |
| goto done; |
| |
| /* driver constants */ |
| strcpy(tuner->name, "FM"); |
| tuner->type = V4L2_TUNER_RADIO; |
| #if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE) |
| tuner->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO | |
| V4L2_TUNER_CAP_RDS; |
| #else |
| tuner->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; |
| #endif |
| |
| /* range limits */ |
| switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_BAND) >> 6) { |
| /* 0: 87.5 - 108 MHz (USA, Europe, default) */ |
| default: |
| tuner->rangelow = 87.5 * FREQ_MUL; |
| tuner->rangehigh = 108 * FREQ_MUL; |
| break; |
| /* 1: 76 - 108 MHz (Japan wide band) */ |
| case 1: |
| tuner->rangelow = 76 * FREQ_MUL; |
| tuner->rangehigh = 108 * FREQ_MUL; |
| break; |
| /* 2: 76 - 90 MHz (Japan) */ |
| case 2: |
| tuner->rangelow = 76 * FREQ_MUL; |
| tuner->rangehigh = 90 * FREQ_MUL; |
| break; |
| }; |
| |
| /* stereo indicator == stereo (instead of mono) */ |
| if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 0) |
| tuner->rxsubchans = V4L2_TUNER_SUB_MONO; |
| else |
| tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; |
| #if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE) |
| /* If there is a reliable method of detecting an RDS channel, |
| then this code should check for that before setting this |
| RDS subchannel. */ |
| tuner->rxsubchans |= V4L2_TUNER_SUB_RDS; |
| #endif |
| |
| /* mono/stereo selector */ |
| if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 0) |
| tuner->audmode = V4L2_TUNER_MODE_STEREO; |
| else |
| tuner->audmode = V4L2_TUNER_MODE_MONO; |
| |
| /* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */ |
| /* measured in units of db쨉V in 1 db increments (max at ~75 db쨉V) */ |
| tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI); |
| /* the ideal factor is 0xffff/75 = 873,8 */ |
| tuner->signal = (tuner->signal * 873) + (8 * tuner->signal / 10); |
| |
| /* automatic frequency control: -1: freq to low, 1 freq to high */ |
| /* AFCRL does only indicate that freq. differs, not if too low/high */ |
| tuner->afc = (radio->registers[STATUSRSSI] & STATUSRSSI_AFCRL) ? 1 : 0; |
| |
| done: |
| if (retval < 0) |
| dev_warn(&radio->videodev->dev, |
| "get tuner failed with %d\n", retval); |
| return retval; |
| } |
| |
| |
| /* |
| * si470x_vidioc_s_tuner - set tuner attributes |
| */ |
| static int si470x_vidioc_s_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *tuner) |
| { |
| struct si470x_device *radio = video_drvdata(file); |
| int retval = -EINVAL; |
| |
| /* safety checks */ |
| retval = si470x_disconnect_check(radio); |
| if (retval) |
| goto done; |
| |
| if (tuner->index != 0) |
| goto done; |
| |
| /* mono/stereo selector */ |
| switch (tuner->audmode) { |
| case V4L2_TUNER_MODE_MONO: |
| radio->registers[POWERCFG] |= POWERCFG_MONO; /* force mono */ |
| break; |
| case V4L2_TUNER_MODE_STEREO: |
| radio->registers[POWERCFG] &= ~POWERCFG_MONO; /* try stereo */ |
| break; |
| default: |
| goto done; |
| } |
| |
| retval = si470x_set_register(radio, POWERCFG); |
| |
| done: |
| if (retval < 0) |
| dev_warn(&radio->videodev->dev, |
| "set tuner failed with %d\n", retval); |
| return retval; |
| } |
| |
| |
| /* |
| * si470x_vidioc_g_frequency - get tuner or modulator radio frequency |
| */ |
| static int si470x_vidioc_g_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *freq) |
| { |
| struct si470x_device *radio = video_drvdata(file); |
| int retval = 0; |
| |
| /* safety checks */ |
| retval = si470x_disconnect_check(radio); |
| if (retval) |
| goto done; |
| |
| if (freq->tuner != 0) { |
| retval = -EINVAL; |
| goto done; |
| } |
| |
| freq->type = V4L2_TUNER_RADIO; |
| retval = si470x_get_freq(radio, &freq->frequency); |
| |
| done: |
| if (retval < 0) |
| dev_warn(&radio->videodev->dev, |
| "get frequency failed with %d\n", retval); |
| return retval; |
| } |
| |
| |
| /* |
| * si470x_vidioc_s_frequency - set tuner or modulator radio frequency |
| */ |
| static int si470x_vidioc_s_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *freq) |
| { |
| struct si470x_device *radio = video_drvdata(file); |
| int retval = 0; |
| |
| /* safety checks */ |
| retval = si470x_disconnect_check(radio); |
| if (retval) |
| goto done; |
| |
| if (freq->tuner != 0) { |
| retval = -EINVAL; |
| goto done; |
| } |
| |
| retval = si470x_set_freq(radio, freq->frequency); |
| |
| done: |
| if (retval < 0) |
| dev_warn(&radio->videodev->dev, |
| "set frequency failed with %d\n", retval); |
| return retval; |
| } |
| |
| |
| /* |
| * si470x_vidioc_s_hw_freq_seek - set hardware frequency seek |
| */ |
| static int si470x_vidioc_s_hw_freq_seek(struct file *file, void *priv, |
| struct v4l2_hw_freq_seek *seek) |
| { |
| struct si470x_device *radio = video_drvdata(file); |
| int retval = 0; |
| |
| /* safety checks */ |
| retval = si470x_disconnect_check(radio); |
| if (retval) |
| goto done; |
| |
| if (seek->tuner != 0) { |
| retval = -EINVAL; |
| goto done; |
| } |
| |
| retval = si470x_set_seek(radio, seek->wrap_around, seek->seek_upward); |
| |
| done: |
| if (retval < 0) |
| dev_warn(&radio->videodev->dev, |
| "set hardware frequency seek failed with %d\n", retval); |
| return retval; |
| } |
| |
| |
| /* |
| * si470x_ioctl_ops - video device ioctl operations |
| */ |
| static const struct v4l2_ioctl_ops si470x_ioctl_ops = { |
| .vidioc_querycap = si470x_vidioc_querycap, |
| .vidioc_queryctrl = si470x_vidioc_queryctrl, |
| .vidioc_g_ctrl = si470x_vidioc_g_ctrl, |
| .vidioc_s_ctrl = si470x_vidioc_s_ctrl, |
| .vidioc_g_audio = si470x_vidioc_g_audio, |
| .vidioc_g_tuner = si470x_vidioc_g_tuner, |
| .vidioc_s_tuner = si470x_vidioc_s_tuner, |
| .vidioc_g_frequency = si470x_vidioc_g_frequency, |
| .vidioc_s_frequency = si470x_vidioc_s_frequency, |
| .vidioc_s_hw_freq_seek = si470x_vidioc_s_hw_freq_seek, |
| }; |
| |
| |
| /* |
| * si470x_viddev_template - video device interface |
| */ |
| struct video_device si470x_viddev_template = { |
| .fops = &si470x_fops, |
| .name = DRIVER_NAME, |
| .release = video_device_release, |
| .ioctl_ops = &si470x_ioctl_ops, |
| }; |