| /* |
| * Alchemy Semi Pb1100 Referrence Board |
| * |
| * Copyright 2001, 2008 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. <source@mvista.com> |
| * |
| * ######################################################################## |
| * |
| * This program is free software; you can distribute it and/or modify it |
| * under the terms of the GNU General Public License (Version 2) as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. |
| * |
| * ######################################################################## |
| * |
| * |
| */ |
| #ifndef __ASM_PB1100_H |
| #define __ASM_PB1100_H |
| |
| #define PB1100_IDENT 0xAE000000 |
| #define BOARD_STATUS_REG 0xAE000004 |
| # define PB1100_ROM_SEL (1 << 15) |
| # define PB1100_ROM_SIZ (1 << 14) |
| # define PB1100_SWAP_BOOT (1 << 13) |
| # define PB1100_FLASH_WP (1 << 12) |
| # define PB1100_ROM_H_STS (1 << 11) |
| # define PB1100_ROM_L_STS (1 << 10) |
| # define PB1100_FLASH_H_STS (1 << 9) |
| # define PB1100_FLASH_L_STS (1 << 8) |
| # define PB1100_SRAM_SIZ (1 << 7) |
| # define PB1100_TSC_BUSY (1 << 6) |
| # define PB1100_PCMCIA_VS_MASK (3 << 4) |
| # define PB1100_RS232_CD (1 << 3) |
| # define PB1100_RS232_CTS (1 << 2) |
| # define PB1100_RS232_DSR (1 << 1) |
| # define PB1100_RS232_RI (1 << 0) |
| |
| #define PB1100_IRDA_RS232 0xAE00000C |
| # define PB1100_IRDA_FULL (0 << 14) /* full power */ |
| # define PB1100_IRDA_SHUTDOWN (1 << 14) |
| # define PB1100_IRDA_TT (2 << 14) /* 2/3 power */ |
| # define PB1100_IRDA_OT (3 << 14) /* 1/3 power */ |
| # define PB1100_IRDA_FIR (1 << 13) |
| |
| #define PCMCIA_BOARD_REG 0xAE000010 |
| # define PB1100_SD_WP1_RO (1 << 15) /* read only */ |
| # define PB1100_SD_WP0_RO (1 << 14) /* read only */ |
| # define PB1100_SD_PWR1 (1 << 11) /* applies power to SD1 */ |
| # define PB1100_SD_PWR0 (1 << 10) /* applies power to SD0 */ |
| # define PB1100_SEL_SD_CONN1 (1 << 9) |
| # define PB1100_SEL_SD_CONN0 (1 << 8) |
| # define PC_DEASSERT_RST (1 << 7) |
| # define PC_DRV_EN (1 << 4) |
| |
| #define PB1100_G_CONTROL 0xAE000014 /* graphics control */ |
| |
| #define PB1100_RST_VDDI 0xAE00001C |
| # define PB1100_SOFT_RESET (1 << 15) /* clear to reset the board */ |
| # define PB1100_VDDI_MASK 0x1F |
| |
| #define PB1100_LEDS 0xAE000018 |
| |
| /* |
| * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED. |
| * 7:0 is the LED Display's decimal points. |
| */ |
| #define PB1100_HEX_LED 0xAE000018 |
| |
| /* PCMCIA Pb1100 specific defines */ |
| #define PCMCIA_MAX_SOCK 0 |
| #define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) |
| |
| /* VPP/VCC */ |
| #define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0)) |
| |
| #endif /* __ASM_PB1100_H */ |
