| /* |
| * QLogic Fibre Channel HBA Driver |
| * Copyright (c) 2003-2008 QLogic Corporation |
| * |
| * See LICENSE.qla2xxx for copyright and licensing details. |
| */ |
| #include "qla_def.h" |
| |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> |
| |
| #include <scsi/scsi_tcq.h> |
| |
| static request_t *qla2x00_req_pkt(struct scsi_qla_host *, struct req_que *, |
| struct rsp_que *rsp); |
| static void qla2x00_isp_cmd(struct scsi_qla_host *, struct req_que *); |
| |
| static void qla25xx_set_que(srb_t *, struct rsp_que **); |
| /** |
| * qla2x00_get_cmd_direction() - Determine control_flag data direction. |
| * @cmd: SCSI command |
| * |
| * Returns the proper CF_* direction based on CDB. |
| */ |
| static inline uint16_t |
| qla2x00_get_cmd_direction(srb_t *sp) |
| { |
| uint16_t cflags; |
| |
| cflags = 0; |
| |
| /* Set transfer direction */ |
| if (sp->cmd->sc_data_direction == DMA_TO_DEVICE) { |
| cflags = CF_WRITE; |
| sp->fcport->vha->hw->qla_stats.output_bytes += |
| scsi_bufflen(sp->cmd); |
| } else if (sp->cmd->sc_data_direction == DMA_FROM_DEVICE) { |
| cflags = CF_READ; |
| sp->fcport->vha->hw->qla_stats.input_bytes += |
| scsi_bufflen(sp->cmd); |
| } |
| return (cflags); |
| } |
| |
| /** |
| * qla2x00_calc_iocbs_32() - Determine number of Command Type 2 and |
| * Continuation Type 0 IOCBs to allocate. |
| * |
| * @dsds: number of data segment decriptors needed |
| * |
| * Returns the number of IOCB entries needed to store @dsds. |
| */ |
| uint16_t |
| qla2x00_calc_iocbs_32(uint16_t dsds) |
| { |
| uint16_t iocbs; |
| |
| iocbs = 1; |
| if (dsds > 3) { |
| iocbs += (dsds - 3) / 7; |
| if ((dsds - 3) % 7) |
| iocbs++; |
| } |
| return (iocbs); |
| } |
| |
| /** |
| * qla2x00_calc_iocbs_64() - Determine number of Command Type 3 and |
| * Continuation Type 1 IOCBs to allocate. |
| * |
| * @dsds: number of data segment decriptors needed |
| * |
| * Returns the number of IOCB entries needed to store @dsds. |
| */ |
| uint16_t |
| qla2x00_calc_iocbs_64(uint16_t dsds) |
| { |
| uint16_t iocbs; |
| |
| iocbs = 1; |
| if (dsds > 2) { |
| iocbs += (dsds - 2) / 5; |
| if ((dsds - 2) % 5) |
| iocbs++; |
| } |
| return (iocbs); |
| } |
| |
| /** |
| * qla2x00_prep_cont_type0_iocb() - Initialize a Continuation Type 0 IOCB. |
| * @ha: HA context |
| * |
| * Returns a pointer to the Continuation Type 0 IOCB packet. |
| */ |
| static inline cont_entry_t * |
| qla2x00_prep_cont_type0_iocb(struct scsi_qla_host *vha) |
| { |
| cont_entry_t *cont_pkt; |
| struct req_que *req = vha->req; |
| /* Adjust ring index. */ |
| req->ring_index++; |
| if (req->ring_index == req->length) { |
| req->ring_index = 0; |
| req->ring_ptr = req->ring; |
| } else { |
| req->ring_ptr++; |
| } |
| |
| cont_pkt = (cont_entry_t *)req->ring_ptr; |
| |
| /* Load packet defaults. */ |
| *((uint32_t *)(&cont_pkt->entry_type)) = |
| __constant_cpu_to_le32(CONTINUE_TYPE); |
| |
| return (cont_pkt); |
| } |
| |
| /** |
| * qla2x00_prep_cont_type1_iocb() - Initialize a Continuation Type 1 IOCB. |
| * @ha: HA context |
| * |
| * Returns a pointer to the continuation type 1 IOCB packet. |
| */ |
| static inline cont_a64_entry_t * |
| qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha) |
| { |
| cont_a64_entry_t *cont_pkt; |
| |
| struct req_que *req = vha->req; |
| /* Adjust ring index. */ |
| req->ring_index++; |
| if (req->ring_index == req->length) { |
| req->ring_index = 0; |
| req->ring_ptr = req->ring; |
| } else { |
| req->ring_ptr++; |
| } |
| |
| cont_pkt = (cont_a64_entry_t *)req->ring_ptr; |
| |
| /* Load packet defaults. */ |
| *((uint32_t *)(&cont_pkt->entry_type)) = |
| __constant_cpu_to_le32(CONTINUE_A64_TYPE); |
| |
| return (cont_pkt); |
| } |
| |
| /** |
| * qla2x00_build_scsi_iocbs_32() - Build IOCB command utilizing 32bit |
| * capable IOCB types. |
| * |
| * @sp: SRB command to process |
| * @cmd_pkt: Command type 2 IOCB |
| * @tot_dsds: Total number of segments to transfer |
| */ |
| void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt, |
| uint16_t tot_dsds) |
| { |
| uint16_t avail_dsds; |
| uint32_t *cur_dsd; |
| scsi_qla_host_t *vha; |
| struct scsi_cmnd *cmd; |
| struct scatterlist *sg; |
| int i; |
| |
| cmd = sp->cmd; |
| |
| /* Update entry type to indicate Command Type 2 IOCB */ |
| *((uint32_t *)(&cmd_pkt->entry_type)) = |
| __constant_cpu_to_le32(COMMAND_TYPE); |
| |
| /* No data transfer */ |
| if (!scsi_bufflen(cmd) || cmd->sc_data_direction == DMA_NONE) { |
| cmd_pkt->byte_count = __constant_cpu_to_le32(0); |
| return; |
| } |
| |
| vha = sp->fcport->vha; |
| cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp)); |
| |
| /* Three DSDs are available in the Command Type 2 IOCB */ |
| avail_dsds = 3; |
| cur_dsd = (uint32_t *)&cmd_pkt->dseg_0_address; |
| |
| /* Load data segments */ |
| scsi_for_each_sg(cmd, sg, tot_dsds, i) { |
| cont_entry_t *cont_pkt; |
| |
| /* Allocate additional continuation packets? */ |
| if (avail_dsds == 0) { |
| /* |
| * Seven DSDs are available in the Continuation |
| * Type 0 IOCB. |
| */ |
| cont_pkt = qla2x00_prep_cont_type0_iocb(vha); |
| cur_dsd = (uint32_t *)&cont_pkt->dseg_0_address; |
| avail_dsds = 7; |
| } |
| |
| *cur_dsd++ = cpu_to_le32(sg_dma_address(sg)); |
| *cur_dsd++ = cpu_to_le32(sg_dma_len(sg)); |
| avail_dsds--; |
| } |
| } |
| |
| /** |
| * qla2x00_build_scsi_iocbs_64() - Build IOCB command utilizing 64bit |
| * capable IOCB types. |
| * |
| * @sp: SRB command to process |
| * @cmd_pkt: Command type 3 IOCB |
| * @tot_dsds: Total number of segments to transfer |
| */ |
| void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt, |
| uint16_t tot_dsds) |
| { |
| uint16_t avail_dsds; |
| uint32_t *cur_dsd; |
| scsi_qla_host_t *vha; |
| struct scsi_cmnd *cmd; |
| struct scatterlist *sg; |
| int i; |
| |
| cmd = sp->cmd; |
| |
| /* Update entry type to indicate Command Type 3 IOCB */ |
| *((uint32_t *)(&cmd_pkt->entry_type)) = |
| __constant_cpu_to_le32(COMMAND_A64_TYPE); |
| |
| /* No data transfer */ |
| if (!scsi_bufflen(cmd) || cmd->sc_data_direction == DMA_NONE) { |
| cmd_pkt->byte_count = __constant_cpu_to_le32(0); |
| return; |
| } |
| |
| vha = sp->fcport->vha; |
| cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp)); |
| |
| /* Two DSDs are available in the Command Type 3 IOCB */ |
| avail_dsds = 2; |
| cur_dsd = (uint32_t *)&cmd_pkt->dseg_0_address; |
| |
| /* Load data segments */ |
| scsi_for_each_sg(cmd, sg, tot_dsds, i) { |
| dma_addr_t sle_dma; |
| cont_a64_entry_t *cont_pkt; |
| |
| /* Allocate additional continuation packets? */ |
| if (avail_dsds == 0) { |
| /* |
| * Five DSDs are available in the Continuation |
| * Type 1 IOCB. |
| */ |
| cont_pkt = qla2x00_prep_cont_type1_iocb(vha); |
| cur_dsd = (uint32_t *)cont_pkt->dseg_0_address; |
| avail_dsds = 5; |
| } |
| |
| sle_dma = sg_dma_address(sg); |
| *cur_dsd++ = cpu_to_le32(LSD(sle_dma)); |
| *cur_dsd++ = cpu_to_le32(MSD(sle_dma)); |
| *cur_dsd++ = cpu_to_le32(sg_dma_len(sg)); |
| avail_dsds--; |
| } |
| } |
| |
| /** |
| * qla2x00_start_scsi() - Send a SCSI command to the ISP |
| * @sp: command to send to the ISP |
| * |
| * Returns non-zero if a failure occurred, else zero. |
| */ |
| int |
| qla2x00_start_scsi(srb_t *sp) |
| { |
| int ret, nseg; |
| unsigned long flags; |
| scsi_qla_host_t *vha; |
| struct scsi_cmnd *cmd; |
| uint32_t *clr_ptr; |
| uint32_t index; |
| uint32_t handle; |
| cmd_entry_t *cmd_pkt; |
| uint16_t cnt; |
| uint16_t req_cnt; |
| uint16_t tot_dsds; |
| struct device_reg_2xxx __iomem *reg; |
| struct qla_hw_data *ha; |
| struct req_que *req; |
| struct rsp_que *rsp; |
| |
| /* Setup device pointers. */ |
| ret = 0; |
| vha = sp->fcport->vha; |
| ha = vha->hw; |
| reg = &ha->iobase->isp; |
| cmd = sp->cmd; |
| req = ha->req_q_map[0]; |
| rsp = ha->rsp_q_map[0]; |
| /* So we know we haven't pci_map'ed anything yet */ |
| tot_dsds = 0; |
| |
| /* Send marker if required */ |
| if (vha->marker_needed != 0) { |
| if (qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL) |
| != QLA_SUCCESS) |
| return (QLA_FUNCTION_FAILED); |
| vha->marker_needed = 0; |
| } |
| |
| /* Acquire ring specific lock */ |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| |
| /* Check for room in outstanding command list. */ |
| handle = req->current_outstanding_cmd; |
| for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { |
| handle++; |
| if (handle == MAX_OUTSTANDING_COMMANDS) |
| handle = 1; |
| if (!req->outstanding_cmds[handle]) |
| break; |
| } |
| if (index == MAX_OUTSTANDING_COMMANDS) |
| goto queuing_error; |
| |
| /* Map the sg table so we have an accurate count of sg entries needed */ |
| if (scsi_sg_count(cmd)) { |
| nseg = dma_map_sg(&ha->pdev->dev, scsi_sglist(cmd), |
| scsi_sg_count(cmd), cmd->sc_data_direction); |
| if (unlikely(!nseg)) |
| goto queuing_error; |
| } else |
| nseg = 0; |
| |
| tot_dsds = nseg; |
| |
| /* Calculate the number of request entries needed. */ |
| req_cnt = ha->isp_ops->calc_req_entries(tot_dsds); |
| if (req->cnt < (req_cnt + 2)) { |
| cnt = RD_REG_WORD_RELAXED(ISP_REQ_Q_OUT(ha, reg)); |
| if (req->ring_index < cnt) |
| req->cnt = cnt - req->ring_index; |
| else |
| req->cnt = req->length - |
| (req->ring_index - cnt); |
| } |
| if (req->cnt < (req_cnt + 2)) |
| goto queuing_error; |
| |
| /* Build command packet */ |
| req->current_outstanding_cmd = handle; |
| req->outstanding_cmds[handle] = sp; |
| sp->handle = handle; |
| sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle; |
| req->cnt -= req_cnt; |
| |
| cmd_pkt = (cmd_entry_t *)req->ring_ptr; |
| cmd_pkt->handle = handle; |
| /* Zero out remaining portion of packet. */ |
| clr_ptr = (uint32_t *)cmd_pkt + 2; |
| memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8); |
| cmd_pkt->dseg_count = cpu_to_le16(tot_dsds); |
| |
| /* Set target ID and LUN number*/ |
| SET_TARGET_ID(ha, cmd_pkt->target, sp->fcport->loop_id); |
| cmd_pkt->lun = cpu_to_le16(sp->cmd->device->lun); |
| |
| /* Update tagged queuing modifier */ |
| cmd_pkt->control_flags = __constant_cpu_to_le16(CF_SIMPLE_TAG); |
| |
| /* Load SCSI command packet. */ |
| memcpy(cmd_pkt->scsi_cdb, cmd->cmnd, cmd->cmd_len); |
| cmd_pkt->byte_count = cpu_to_le32((uint32_t)scsi_bufflen(cmd)); |
| |
| /* Build IOCB segments */ |
| ha->isp_ops->build_iocbs(sp, cmd_pkt, tot_dsds); |
| |
| /* Set total data segment count. */ |
| cmd_pkt->entry_count = (uint8_t)req_cnt; |
| wmb(); |
| |
| /* Adjust ring index. */ |
| req->ring_index++; |
| if (req->ring_index == req->length) { |
| req->ring_index = 0; |
| req->ring_ptr = req->ring; |
| } else |
| req->ring_ptr++; |
| |
| sp->flags |= SRB_DMA_VALID; |
| |
| /* Set chip new ring index. */ |
| WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), req->ring_index); |
| RD_REG_WORD_RELAXED(ISP_REQ_Q_IN(ha, reg)); /* PCI Posting. */ |
| |
| /* Manage unprocessed RIO/ZIO commands in response queue. */ |
| if (vha->flags.process_response_queue && |
| rsp->ring_ptr->signature != RESPONSE_PROCESSED) |
| qla2x00_process_response_queue(rsp); |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| return (QLA_SUCCESS); |
| |
| queuing_error: |
| if (tot_dsds) |
| scsi_dma_unmap(cmd); |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return (QLA_FUNCTION_FAILED); |
| } |
| |
| /** |
| * qla2x00_marker() - Send a marker IOCB to the firmware. |
| * @ha: HA context |
| * @loop_id: loop ID |
| * @lun: LUN |
| * @type: marker modifier |
| * |
| * Can be called from both normal and interrupt context. |
| * |
| * Returns non-zero if a failure occurred, else zero. |
| */ |
| int |
| __qla2x00_marker(struct scsi_qla_host *vha, struct req_que *req, |
| struct rsp_que *rsp, uint16_t loop_id, |
| uint16_t lun, uint8_t type) |
| { |
| mrk_entry_t *mrk; |
| struct mrk_entry_24xx *mrk24; |
| struct qla_hw_data *ha = vha->hw; |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| |
| mrk24 = NULL; |
| mrk = (mrk_entry_t *)qla2x00_req_pkt(vha, req, rsp); |
| if (mrk == NULL) { |
| DEBUG2_3(printk("%s(%ld): failed to allocate Marker IOCB.\n", |
| __func__, base_vha->host_no)); |
| |
| return (QLA_FUNCTION_FAILED); |
| } |
| |
| mrk->entry_type = MARKER_TYPE; |
| mrk->modifier = type; |
| if (type != MK_SYNC_ALL) { |
| if (IS_FWI2_CAPABLE(ha)) { |
| mrk24 = (struct mrk_entry_24xx *) mrk; |
| mrk24->nport_handle = cpu_to_le16(loop_id); |
| mrk24->lun[1] = LSB(lun); |
| mrk24->lun[2] = MSB(lun); |
| host_to_fcp_swap(mrk24->lun, sizeof(mrk24->lun)); |
| mrk24->vp_index = vha->vp_idx; |
| mrk24->handle = MAKE_HANDLE(req->id, mrk24->handle); |
| } else { |
| SET_TARGET_ID(ha, mrk->target, loop_id); |
| mrk->lun = cpu_to_le16(lun); |
| } |
| } |
| wmb(); |
| |
| qla2x00_isp_cmd(vha, req); |
| |
| return (QLA_SUCCESS); |
| } |
| |
| int |
| qla2x00_marker(struct scsi_qla_host *vha, struct req_que *req, |
| struct rsp_que *rsp, uint16_t loop_id, uint16_t lun, |
| uint8_t type) |
| { |
| int ret; |
| unsigned long flags = 0; |
| |
| spin_lock_irqsave(&vha->hw->hardware_lock, flags); |
| ret = __qla2x00_marker(vha, req, rsp, loop_id, lun, type); |
| spin_unlock_irqrestore(&vha->hw->hardware_lock, flags); |
| |
| return (ret); |
| } |
| |
| /** |
| * qla2x00_req_pkt() - Retrieve a request packet from the request ring. |
| * @ha: HA context |
| * |
| * Note: The caller must hold the hardware lock before calling this routine. |
| * |
| * Returns NULL if function failed, else, a pointer to the request packet. |
| */ |
| static request_t * |
| qla2x00_req_pkt(struct scsi_qla_host *vha, struct req_que *req, |
| struct rsp_que *rsp) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| device_reg_t __iomem *reg = ISP_QUE_REG(ha, req->id); |
| request_t *pkt = NULL; |
| uint16_t cnt; |
| uint32_t *dword_ptr; |
| uint32_t timer; |
| uint16_t req_cnt = 1; |
| |
| /* Wait 1 second for slot. */ |
| for (timer = HZ; timer; timer--) { |
| if ((req_cnt + 2) >= req->cnt) { |
| /* Calculate number of free request entries. */ |
| if (ha->mqenable) |
| cnt = (uint16_t) |
| RD_REG_DWORD(®->isp25mq.req_q_out); |
| else { |
| if (IS_FWI2_CAPABLE(ha)) |
| cnt = (uint16_t)RD_REG_DWORD( |
| ®->isp24.req_q_out); |
| else |
| cnt = qla2x00_debounce_register( |
| ISP_REQ_Q_OUT(ha, ®->isp)); |
| } |
| if (req->ring_index < cnt) |
| req->cnt = cnt - req->ring_index; |
| else |
| req->cnt = req->length - |
| (req->ring_index - cnt); |
| } |
| /* If room for request in request ring. */ |
| if ((req_cnt + 2) < req->cnt) { |
| req->cnt--; |
| pkt = req->ring_ptr; |
| |
| /* Zero out packet. */ |
| dword_ptr = (uint32_t *)pkt; |
| for (cnt = 0; cnt < REQUEST_ENTRY_SIZE / 4; cnt++) |
| *dword_ptr++ = 0; |
| |
| /* Set entry count. */ |
| pkt->entry_count = 1; |
| |
| break; |
| } |
| |
| /* Release ring specific lock */ |
| spin_unlock_irq(&ha->hardware_lock); |
| |
| udelay(2); /* 2 us */ |
| |
| /* Check for pending interrupts. */ |
| /* During init we issue marker directly */ |
| if (!vha->marker_needed && !vha->flags.init_done) |
| qla2x00_poll(rsp); |
| spin_lock_irq(&ha->hardware_lock); |
| } |
| if (!pkt) { |
| DEBUG2_3(printk("%s(): **** FAILED ****\n", __func__)); |
| } |
| |
| return (pkt); |
| } |
| |
| /** |
| * qla2x00_isp_cmd() - Modify the request ring pointer. |
| * @ha: HA context |
| * |
| * Note: The caller must hold the hardware lock before calling this routine. |
| */ |
| static void |
| qla2x00_isp_cmd(struct scsi_qla_host *vha, struct req_que *req) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| device_reg_t __iomem *reg = ISP_QUE_REG(ha, req->id); |
| struct device_reg_2xxx __iomem *ioreg = &ha->iobase->isp; |
| |
| DEBUG5(printk("%s(): IOCB data:\n", __func__)); |
| DEBUG5(qla2x00_dump_buffer( |
| (uint8_t *)req->ring_ptr, REQUEST_ENTRY_SIZE)); |
| |
| /* Adjust ring index. */ |
| req->ring_index++; |
| if (req->ring_index == req->length) { |
| req->ring_index = 0; |
| req->ring_ptr = req->ring; |
| } else |
| req->ring_ptr++; |
| |
| /* Set chip new ring index. */ |
| if (ha->mqenable) { |
| WRT_REG_DWORD(®->isp25mq.req_q_in, req->ring_index); |
| RD_REG_DWORD(&ioreg->hccr); |
| } |
| else { |
| if (IS_FWI2_CAPABLE(ha)) { |
| WRT_REG_DWORD(®->isp24.req_q_in, req->ring_index); |
| RD_REG_DWORD_RELAXED(®->isp24.req_q_in); |
| } else { |
| WRT_REG_WORD(ISP_REQ_Q_IN(ha, ®->isp), |
| req->ring_index); |
| RD_REG_WORD_RELAXED(ISP_REQ_Q_IN(ha, ®->isp)); |
| } |
| } |
| |
| } |
| |
| /** |
| * qla24xx_calc_iocbs() - Determine number of Command Type 3 and |
| * Continuation Type 1 IOCBs to allocate. |
| * |
| * @dsds: number of data segment decriptors needed |
| * |
| * Returns the number of IOCB entries needed to store @dsds. |
| */ |
| static inline uint16_t |
| qla24xx_calc_iocbs(uint16_t dsds) |
| { |
| uint16_t iocbs; |
| |
| iocbs = 1; |
| if (dsds > 1) { |
| iocbs += (dsds - 1) / 5; |
| if ((dsds - 1) % 5) |
| iocbs++; |
| } |
| return iocbs; |
| } |
| |
| /** |
| * qla24xx_build_scsi_iocbs() - Build IOCB command utilizing Command Type 7 |
| * IOCB types. |
| * |
| * @sp: SRB command to process |
| * @cmd_pkt: Command type 3 IOCB |
| * @tot_dsds: Total number of segments to transfer |
| */ |
| static inline void |
| qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt, |
| uint16_t tot_dsds) |
| { |
| uint16_t avail_dsds; |
| uint32_t *cur_dsd; |
| scsi_qla_host_t *vha; |
| struct scsi_cmnd *cmd; |
| struct scatterlist *sg; |
| int i; |
| struct req_que *req; |
| |
| cmd = sp->cmd; |
| |
| /* Update entry type to indicate Command Type 3 IOCB */ |
| *((uint32_t *)(&cmd_pkt->entry_type)) = |
| __constant_cpu_to_le32(COMMAND_TYPE_7); |
| |
| /* No data transfer */ |
| if (!scsi_bufflen(cmd) || cmd->sc_data_direction == DMA_NONE) { |
| cmd_pkt->byte_count = __constant_cpu_to_le32(0); |
| return; |
| } |
| |
| vha = sp->fcport->vha; |
| req = vha->req; |
| |
| /* Set transfer direction */ |
| if (cmd->sc_data_direction == DMA_TO_DEVICE) { |
| cmd_pkt->task_mgmt_flags = |
| __constant_cpu_to_le16(TMF_WRITE_DATA); |
| sp->fcport->vha->hw->qla_stats.output_bytes += |
| scsi_bufflen(sp->cmd); |
| } else if (cmd->sc_data_direction == DMA_FROM_DEVICE) { |
| cmd_pkt->task_mgmt_flags = |
| __constant_cpu_to_le16(TMF_READ_DATA); |
| sp->fcport->vha->hw->qla_stats.input_bytes += |
| scsi_bufflen(sp->cmd); |
| } |
| |
| /* One DSD is available in the Command Type 3 IOCB */ |
| avail_dsds = 1; |
| cur_dsd = (uint32_t *)&cmd_pkt->dseg_0_address; |
| |
| /* Load data segments */ |
| |
| scsi_for_each_sg(cmd, sg, tot_dsds, i) { |
| dma_addr_t sle_dma; |
| cont_a64_entry_t *cont_pkt; |
| |
| /* Allocate additional continuation packets? */ |
| if (avail_dsds == 0) { |
| /* |
| * Five DSDs are available in the Continuation |
| * Type 1 IOCB. |
| */ |
| cont_pkt = qla2x00_prep_cont_type1_iocb(vha); |
| cur_dsd = (uint32_t *)cont_pkt->dseg_0_address; |
| avail_dsds = 5; |
| } |
| |
| sle_dma = sg_dma_address(sg); |
| *cur_dsd++ = cpu_to_le32(LSD(sle_dma)); |
| *cur_dsd++ = cpu_to_le32(MSD(sle_dma)); |
| *cur_dsd++ = cpu_to_le32(sg_dma_len(sg)); |
| avail_dsds--; |
| } |
| } |
| |
| |
| /** |
| * qla24xx_start_scsi() - Send a SCSI command to the ISP |
| * @sp: command to send to the ISP |
| * |
| * Returns non-zero if a failure occurred, else zero. |
| */ |
| int |
| qla24xx_start_scsi(srb_t *sp) |
| { |
| int ret, nseg; |
| unsigned long flags; |
| uint32_t *clr_ptr; |
| uint32_t index; |
| uint32_t handle; |
| struct cmd_type_7 *cmd_pkt; |
| uint16_t cnt; |
| uint16_t req_cnt; |
| uint16_t tot_dsds; |
| struct req_que *req = NULL; |
| struct rsp_que *rsp = NULL; |
| struct scsi_cmnd *cmd = sp->cmd; |
| struct scsi_qla_host *vha = sp->fcport->vha; |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* Setup device pointers. */ |
| ret = 0; |
| |
| qla25xx_set_que(sp, &rsp); |
| req = vha->req; |
| |
| /* So we know we haven't pci_map'ed anything yet */ |
| tot_dsds = 0; |
| |
| /* Send marker if required */ |
| if (vha->marker_needed != 0) { |
| if (qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL) |
| != QLA_SUCCESS) |
| return QLA_FUNCTION_FAILED; |
| vha->marker_needed = 0; |
| } |
| |
| /* Acquire ring specific lock */ |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| |
| /* Check for room in outstanding command list. */ |
| handle = req->current_outstanding_cmd; |
| for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { |
| handle++; |
| if (handle == MAX_OUTSTANDING_COMMANDS) |
| handle = 1; |
| if (!req->outstanding_cmds[handle]) |
| break; |
| } |
| if (index == MAX_OUTSTANDING_COMMANDS) |
| goto queuing_error; |
| |
| /* Map the sg table so we have an accurate count of sg entries needed */ |
| if (scsi_sg_count(cmd)) { |
| nseg = dma_map_sg(&ha->pdev->dev, scsi_sglist(cmd), |
| scsi_sg_count(cmd), cmd->sc_data_direction); |
| if (unlikely(!nseg)) |
| goto queuing_error; |
| } else |
| nseg = 0; |
| |
| tot_dsds = nseg; |
| |
| req_cnt = qla24xx_calc_iocbs(tot_dsds); |
| if (req->cnt < (req_cnt + 2)) { |
| cnt = RD_REG_DWORD_RELAXED(req->req_q_out); |
| |
| if (req->ring_index < cnt) |
| req->cnt = cnt - req->ring_index; |
| else |
| req->cnt = req->length - |
| (req->ring_index - cnt); |
| } |
| if (req->cnt < (req_cnt + 2)) |
| goto queuing_error; |
| |
| /* Build command packet. */ |
| req->current_outstanding_cmd = handle; |
| req->outstanding_cmds[handle] = sp; |
| sp->handle = handle; |
| sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle; |
| req->cnt -= req_cnt; |
| |
| cmd_pkt = (struct cmd_type_7 *)req->ring_ptr; |
| cmd_pkt->handle = MAKE_HANDLE(req->id, handle); |
| |
| /* Zero out remaining portion of packet. */ |
| /* tagged queuing modifier -- default is TSK_SIMPLE (0). */ |
| clr_ptr = (uint32_t *)cmd_pkt + 2; |
| memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8); |
| cmd_pkt->dseg_count = cpu_to_le16(tot_dsds); |
| |
| /* Set NPORT-ID and LUN number*/ |
| cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id); |
| cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa; |
| cmd_pkt->port_id[1] = sp->fcport->d_id.b.area; |
| cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain; |
| cmd_pkt->vp_index = sp->fcport->vp_idx; |
| |
| int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); |
| host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun)); |
| |
| /* Load SCSI command packet. */ |
| memcpy(cmd_pkt->fcp_cdb, cmd->cmnd, cmd->cmd_len); |
| host_to_fcp_swap(cmd_pkt->fcp_cdb, sizeof(cmd_pkt->fcp_cdb)); |
| |
| cmd_pkt->byte_count = cpu_to_le32((uint32_t)scsi_bufflen(cmd)); |
| |
| /* Build IOCB segments */ |
| qla24xx_build_scsi_iocbs(sp, cmd_pkt, tot_dsds); |
| |
| /* Set total data segment count. */ |
| cmd_pkt->entry_count = (uint8_t)req_cnt; |
| /* Specify response queue number where completion should happen */ |
| cmd_pkt->entry_status = (uint8_t) rsp->id; |
| wmb(); |
| |
| /* Adjust ring index. */ |
| req->ring_index++; |
| if (req->ring_index == req->length) { |
| req->ring_index = 0; |
| req->ring_ptr = req->ring; |
| } else |
| req->ring_ptr++; |
| |
| sp->flags |= SRB_DMA_VALID; |
| |
| /* Set chip new ring index. */ |
| WRT_REG_DWORD(req->req_q_in, req->ring_index); |
| RD_REG_DWORD_RELAXED(&ha->iobase->isp24.hccr); |
| |
| /* Manage unprocessed RIO/ZIO commands in response queue. */ |
| if (vha->flags.process_response_queue && |
| rsp->ring_ptr->signature != RESPONSE_PROCESSED) |
| qla24xx_process_response_queue(vha, rsp); |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| return QLA_SUCCESS; |
| |
| queuing_error: |
| if (tot_dsds) |
| scsi_dma_unmap(cmd); |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| static void qla25xx_set_que(srb_t *sp, struct rsp_que **rsp) |
| { |
| struct scsi_cmnd *cmd = sp->cmd; |
| struct qla_hw_data *ha = sp->fcport->vha->hw; |
| int affinity = cmd->request->cpu; |
| |
| if (ha->flags.cpu_affinity_enabled && affinity >= 0 && |
| affinity < ha->max_rsp_queues - 1) |
| *rsp = ha->rsp_q_map[affinity + 1]; |
| else |
| *rsp = ha->rsp_q_map[0]; |
| } |
| |
| /* Generic Control-SRB manipulation functions. */ |
| |
| static void * |
| qla2x00_alloc_iocbs(srb_t *sp) |
| { |
| scsi_qla_host_t *vha = sp->fcport->vha; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req = ha->req_q_map[0]; |
| device_reg_t __iomem *reg = ISP_QUE_REG(ha, req->id); |
| uint32_t index, handle; |
| request_t *pkt; |
| uint16_t cnt, req_cnt; |
| |
| pkt = NULL; |
| req_cnt = 1; |
| |
| /* Check for room in outstanding command list. */ |
| handle = req->current_outstanding_cmd; |
| for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { |
| handle++; |
| if (handle == MAX_OUTSTANDING_COMMANDS) |
| handle = 1; |
| if (!req->outstanding_cmds[handle]) |
| break; |
| } |
| if (index == MAX_OUTSTANDING_COMMANDS) |
| goto queuing_error; |
| |
| /* Check for room on request queue. */ |
| if (req->cnt < req_cnt) { |
| if (ha->mqenable) |
| cnt = RD_REG_DWORD(®->isp25mq.req_q_out); |
| else if (IS_FWI2_CAPABLE(ha)) |
| cnt = RD_REG_DWORD(®->isp24.req_q_out); |
| else |
| cnt = qla2x00_debounce_register( |
| ISP_REQ_Q_OUT(ha, ®->isp)); |
| |
| if (req->ring_index < cnt) |
| req->cnt = cnt - req->ring_index; |
| else |
| req->cnt = req->length - |
| (req->ring_index - cnt); |
| } |
| if (req->cnt < req_cnt) |
| goto queuing_error; |
| |
| /* Prep packet */ |
| req->current_outstanding_cmd = handle; |
| req->outstanding_cmds[handle] = sp; |
| req->cnt -= req_cnt; |
| |
| pkt = req->ring_ptr; |
| memset(pkt, 0, REQUEST_ENTRY_SIZE); |
| pkt->entry_count = req_cnt; |
| pkt->handle = handle; |
| sp->handle = handle; |
| |
| queuing_error: |
| return pkt; |
| } |
| |
| static void |
| qla2x00_start_iocbs(srb_t *sp) |
| { |
| struct qla_hw_data *ha = sp->fcport->vha->hw; |
| struct req_que *req = ha->req_q_map[0]; |
| device_reg_t __iomem *reg = ISP_QUE_REG(ha, req->id); |
| struct device_reg_2xxx __iomem *ioreg = &ha->iobase->isp; |
| |
| /* Adjust ring index. */ |
| req->ring_index++; |
| if (req->ring_index == req->length) { |
| req->ring_index = 0; |
| req->ring_ptr = req->ring; |
| } else |
| req->ring_ptr++; |
| |
| /* Set chip new ring index. */ |
| if (ha->mqenable) { |
| WRT_REG_DWORD(®->isp25mq.req_q_in, req->ring_index); |
| RD_REG_DWORD(&ioreg->hccr); |
| } else if (IS_FWI2_CAPABLE(ha)) { |
| WRT_REG_DWORD(®->isp24.req_q_in, req->ring_index); |
| RD_REG_DWORD_RELAXED(®->isp24.req_q_in); |
| } else { |
| WRT_REG_WORD(ISP_REQ_Q_IN(ha, ®->isp), req->ring_index); |
| RD_REG_WORD_RELAXED(ISP_REQ_Q_IN(ha, ®->isp)); |
| } |
| } |
| |
| static void |
| qla24xx_login_iocb(srb_t *sp, struct logio_entry_24xx *logio) |
| { |
| struct srb_logio *lio = sp->ctx; |
| |
| logio->entry_type = LOGINOUT_PORT_IOCB_TYPE; |
| logio->control_flags = cpu_to_le16(LCF_COMMAND_PLOGI); |
| if (lio->flags & SRB_LOGIN_COND_PLOGI) |
| logio->control_flags |= cpu_to_le16(LCF_COND_PLOGI); |
| if (lio->flags & SRB_LOGIN_SKIP_PRLI) |
| logio->control_flags |= cpu_to_le16(LCF_SKIP_PRLI); |
| logio->nport_handle = cpu_to_le16(sp->fcport->loop_id); |
| logio->port_id[0] = sp->fcport->d_id.b.al_pa; |
| logio->port_id[1] = sp->fcport->d_id.b.area; |
| logio->port_id[2] = sp->fcport->d_id.b.domain; |
| logio->vp_index = sp->fcport->vp_idx; |
| } |
| |
| static void |
| qla2x00_login_iocb(srb_t *sp, struct mbx_entry *mbx) |
| { |
| struct qla_hw_data *ha = sp->fcport->vha->hw; |
| struct srb_logio *lio = sp->ctx; |
| uint16_t opts; |
| |
| mbx->entry_type = MBX_IOCB_TYPE;; |
| SET_TARGET_ID(ha, mbx->loop_id, sp->fcport->loop_id); |
| mbx->mb0 = cpu_to_le16(MBC_LOGIN_FABRIC_PORT); |
| opts = lio->flags & SRB_LOGIN_COND_PLOGI ? BIT_0: 0; |
| opts |= lio->flags & SRB_LOGIN_SKIP_PRLI ? BIT_1: 0; |
| if (HAS_EXTENDED_IDS(ha)) { |
| mbx->mb1 = cpu_to_le16(sp->fcport->loop_id); |
| mbx->mb10 = cpu_to_le16(opts); |
| } else { |
| mbx->mb1 = cpu_to_le16((sp->fcport->loop_id << 8) | opts); |
| } |
| mbx->mb2 = cpu_to_le16(sp->fcport->d_id.b.domain); |
| mbx->mb3 = cpu_to_le16(sp->fcport->d_id.b.area << 8 | |
| sp->fcport->d_id.b.al_pa); |
| mbx->mb9 = cpu_to_le16(sp->fcport->vp_idx); |
| } |
| |
| static void |
| qla24xx_logout_iocb(srb_t *sp, struct logio_entry_24xx *logio) |
| { |
| logio->entry_type = LOGINOUT_PORT_IOCB_TYPE; |
| logio->control_flags = |
| cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO); |
| logio->nport_handle = cpu_to_le16(sp->fcport->loop_id); |
| logio->port_id[0] = sp->fcport->d_id.b.al_pa; |
| logio->port_id[1] = sp->fcport->d_id.b.area; |
| logio->port_id[2] = sp->fcport->d_id.b.domain; |
| logio->vp_index = sp->fcport->vp_idx; |
| } |
| |
| static void |
| qla2x00_logout_iocb(srb_t *sp, struct mbx_entry *mbx) |
| { |
| struct qla_hw_data *ha = sp->fcport->vha->hw; |
| |
| mbx->entry_type = MBX_IOCB_TYPE;; |
| SET_TARGET_ID(ha, mbx->loop_id, sp->fcport->loop_id); |
| mbx->mb0 = cpu_to_le16(MBC_LOGOUT_FABRIC_PORT); |
| mbx->mb1 = HAS_EXTENDED_IDS(ha) ? |
| cpu_to_le16(sp->fcport->loop_id): |
| cpu_to_le16(sp->fcport->loop_id << 8); |
| mbx->mb2 = cpu_to_le16(sp->fcport->d_id.b.domain); |
| mbx->mb3 = cpu_to_le16(sp->fcport->d_id.b.area << 8 | |
| sp->fcport->d_id.b.al_pa); |
| mbx->mb9 = cpu_to_le16(sp->fcport->vp_idx); |
| /* Implicit: mbx->mbx10 = 0. */ |
| } |
| |
| int |
| qla2x00_start_sp(srb_t *sp) |
| { |
| int rval; |
| struct qla_hw_data *ha = sp->fcport->vha->hw; |
| void *pkt; |
| struct srb_ctx *ctx = sp->ctx; |
| unsigned long flags; |
| |
| rval = QLA_FUNCTION_FAILED; |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| pkt = qla2x00_alloc_iocbs(sp); |
| if (!pkt) |
| goto done; |
| |
| rval = QLA_SUCCESS; |
| switch (ctx->type) { |
| case SRB_LOGIN_CMD: |
| IS_FWI2_CAPABLE(ha) ? |
| qla24xx_login_iocb(sp, pkt): |
| qla2x00_login_iocb(sp, pkt); |
| break; |
| case SRB_LOGOUT_CMD: |
| IS_FWI2_CAPABLE(ha) ? |
| qla24xx_logout_iocb(sp, pkt): |
| qla2x00_logout_iocb(sp, pkt); |
| break; |
| default: |
| break; |
| } |
| |
| wmb(); |
| qla2x00_start_iocbs(sp); |
| done: |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| return rval; |
| } |