| /* |
| * linux/arch/arm/mach-mmp/aspenite.c |
| * |
| * Support for the Marvell PXA168-based Aspenite and Zylonite2 |
| * Development Platform. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * publishhed by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/smc91x.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <mach/addr-map.h> |
| #include <mach/mfp-pxa168.h> |
| #include <mach/pxa168.h> |
| #include <mach/gpio.h> |
| |
| #include "common.h" |
| |
| static unsigned long common_pin_config[] __initdata = { |
| /* Data Flash Interface */ |
| GPIO0_DFI_D15, |
| GPIO1_DFI_D14, |
| GPIO2_DFI_D13, |
| GPIO3_DFI_D12, |
| GPIO4_DFI_D11, |
| GPIO5_DFI_D10, |
| GPIO6_DFI_D9, |
| GPIO7_DFI_D8, |
| GPIO8_DFI_D7, |
| GPIO9_DFI_D6, |
| GPIO10_DFI_D5, |
| GPIO11_DFI_D4, |
| GPIO12_DFI_D3, |
| GPIO13_DFI_D2, |
| GPIO14_DFI_D1, |
| GPIO15_DFI_D0, |
| |
| /* Static Memory Controller */ |
| GPIO18_SMC_nCS0, |
| GPIO34_SMC_nCS1, |
| GPIO23_SMC_nLUA, |
| GPIO25_SMC_nLLA, |
| GPIO28_SMC_RDY, |
| GPIO29_SMC_SCLK, |
| GPIO35_SMC_BE1, |
| GPIO36_SMC_BE2, |
| GPIO27_GPIO, /* Ethernet IRQ */ |
| |
| /* UART1 */ |
| GPIO107_UART1_RXD, |
| GPIO108_UART1_TXD, |
| }; |
| |
| static struct smc91x_platdata smc91x_info = { |
| .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, |
| }; |
| |
| static struct resource smc91x_resources[] = { |
| [0] = { |
| .start = SMC_CS1_PHYS_BASE + 0x300, |
| .end = SMC_CS1_PHYS_BASE + 0xfffff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = gpio_to_irq(27), |
| .end = gpio_to_irq(27), |
| .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, |
| } |
| }; |
| |
| static struct platform_device smc91x_device = { |
| .name = "smc91x", |
| .id = 0, |
| .dev = { |
| .platform_data = &smc91x_info, |
| }, |
| .num_resources = ARRAY_SIZE(smc91x_resources), |
| .resource = smc91x_resources, |
| }; |
| |
| static void __init common_init(void) |
| { |
| mfp_config(ARRAY_AND_SIZE(common_pin_config)); |
| |
| /* on-chip devices */ |
| pxa168_add_uart(1); |
| |
| /* off-chip devices */ |
| platform_device_register(&smc91x_device); |
| } |
| |
| MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform") |
| .phys_io = APB_PHYS_BASE, |
| .boot_params = 0x00000100, |
| .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, |
| .map_io = pxa_map_io, |
| .init_irq = pxa168_init_irq, |
| .timer = &pxa168_timer, |
| .init_machine = common_init, |
| MACHINE_END |
| |
| MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform") |
| .phys_io = APB_PHYS_BASE, |
| .boot_params = 0x00000100, |
| .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, |
| .map_io = pxa_map_io, |
| .init_irq = pxa168_init_irq, |
| .timer = &pxa168_timer, |
| .init_machine = common_init, |
| MACHINE_END |