| /* |
| * arch/sh/boards/renesas/r7780rp/setup.c |
| * |
| * Renesas Solutions Highlander Support. |
| * |
| * Copyright (C) 2002 Atom Create Engineering Co., Ltd. |
| * Copyright (C) 2005 - 2008 Paul Mundt |
| * |
| * This contains support for the R7780RP-1, R7780MP, and R7785RP |
| * Highlander modules. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/ata_platform.h> |
| #include <linux/types.h> |
| #include <linux/mtd/physmap.h> |
| #include <linux/i2c.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/usb/r8a66597.h> |
| #include <linux/usb/m66592.h> |
| #include <net/ax88796.h> |
| #include <asm/machvec.h> |
| #include <mach/highlander.h> |
| #include <asm/clock.h> |
| #include <asm/heartbeat.h> |
| #include <asm/io.h> |
| #include <asm/io_trapped.h> |
| |
| static struct r8a66597_platdata r8a66597_data = { |
| .xtal = R8A66597_PLATDATA_XTAL_12MHZ, |
| .vif = 1, |
| }; |
| |
| static struct resource r8a66597_usb_host_resources[] = { |
| [0] = { |
| .start = 0xA4200000, |
| .end = 0xA42000FF, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_EXT1, /* irq number */ |
| .end = IRQ_EXT1, |
| .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, |
| }, |
| }; |
| |
| static struct platform_device r8a66597_usb_host_device = { |
| .name = "r8a66597_hcd", |
| .id = -1, |
| .dev = { |
| .dma_mask = NULL, /* don't use dma */ |
| .coherent_dma_mask = 0xffffffff, |
| .platform_data = &r8a66597_data, |
| }, |
| .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), |
| .resource = r8a66597_usb_host_resources, |
| }; |
| |
| static struct m66592_platdata usbf_platdata = { |
| .xtal = M66592_PLATDATA_XTAL_24MHZ, |
| .vif = 1, |
| }; |
| |
| static struct resource m66592_usb_peripheral_resources[] = { |
| [0] = { |
| .name = "m66592_udc", |
| .start = 0xb0000000, |
| .end = 0xb00000FF, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .name = "m66592_udc", |
| .start = IRQ_EXT4, /* irq number */ |
| .end = IRQ_EXT4, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device m66592_usb_peripheral_device = { |
| .name = "m66592_udc", |
| .id = -1, |
| .dev = { |
| .dma_mask = NULL, /* don't use dma */ |
| .coherent_dma_mask = 0xffffffff, |
| .platform_data = &usbf_platdata, |
| }, |
| .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources), |
| .resource = m66592_usb_peripheral_resources, |
| }; |
| |
| static struct resource cf_ide_resources[] = { |
| [0] = { |
| .start = PA_AREA5_IO + 0x1000, |
| .end = PA_AREA5_IO + 0x1000 + 0x08 - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = PA_AREA5_IO + 0x80c, |
| .end = PA_AREA5_IO + 0x80c + 0x16 - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [2] = { |
| .start = IRQ_CF, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct pata_platform_info pata_info = { |
| .ioport_shift = 1, |
| }; |
| |
| static struct platform_device cf_ide_device = { |
| .name = "pata_platform", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(cf_ide_resources), |
| .resource = cf_ide_resources, |
| .dev = { |
| .platform_data = &pata_info, |
| }, |
| }; |
| |
| static struct resource heartbeat_resources[] = { |
| [0] = { |
| .start = PA_OBLED, |
| .end = PA_OBLED, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| #ifndef CONFIG_SH_R7785RP |
| static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; |
| |
| static struct heartbeat_data heartbeat_data = { |
| .bit_pos = heartbeat_bit_pos, |
| .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), |
| }; |
| #endif |
| |
| static struct platform_device heartbeat_device = { |
| .name = "heartbeat", |
| .id = -1, |
| |
| /* R7785RP has a slightly more sensible FPGA.. */ |
| #ifndef CONFIG_SH_R7785RP |
| .dev = { |
| .platform_data = &heartbeat_data, |
| }, |
| #endif |
| .num_resources = ARRAY_SIZE(heartbeat_resources), |
| .resource = heartbeat_resources, |
| }; |
| |
| static struct ax_plat_data ax88796_platdata = { |
| .flags = AXFLG_HAS_93CX6, |
| .wordlength = 2, |
| .dcr_val = 0x1, |
| .rcr_val = 0x40, |
| }; |
| |
| static struct resource ax88796_resources[] = { |
| { |
| #ifdef CONFIG_SH_R7780RP |
| .start = 0xa5800400, |
| .end = 0xa5800400 + (0x20 * 0x2) - 1, |
| #else |
| .start = 0xa4100400, |
| .end = 0xa4100400 + (0x20 * 0x2) - 1, |
| #endif |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = IRQ_AX88796, |
| .end = IRQ_AX88796, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device ax88796_device = { |
| .name = "ax88796", |
| .id = 0, |
| |
| .dev = { |
| .platform_data = &ax88796_platdata, |
| }, |
| |
| .num_resources = ARRAY_SIZE(ax88796_resources), |
| .resource = ax88796_resources, |
| }; |
| |
| static struct mtd_partition nor_flash_partitions[] = { |
| { |
| .name = "loader", |
| .offset = 0x00000000, |
| .size = 512 * 1024, |
| }, |
| { |
| .name = "bootenv", |
| .offset = MTDPART_OFS_APPEND, |
| .size = 512 * 1024, |
| }, |
| { |
| .name = "kernel", |
| .offset = MTDPART_OFS_APPEND, |
| .size = 4 * 1024 * 1024, |
| }, |
| { |
| .name = "data", |
| .offset = MTDPART_OFS_APPEND, |
| .size = MTDPART_SIZ_FULL, |
| }, |
| }; |
| |
| static struct physmap_flash_data nor_flash_data = { |
| .width = 4, |
| .parts = nor_flash_partitions, |
| .nr_parts = ARRAY_SIZE(nor_flash_partitions), |
| }; |
| |
| /* This config is flash board for mass production. */ |
| static struct resource nor_flash_resources[] = { |
| [0] = { |
| .start = PA_NORFLASH_ADDR, |
| .end = PA_NORFLASH_ADDR + PA_NORFLASH_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| } |
| }; |
| |
| static struct platform_device nor_flash_device = { |
| .name = "physmap-flash", |
| .dev = { |
| .platform_data = &nor_flash_data, |
| }, |
| .num_resources = ARRAY_SIZE(nor_flash_resources), |
| .resource = nor_flash_resources, |
| }; |
| |
| static struct resource smbus_resources[] = { |
| [0] = { |
| .start = PA_SMCR, |
| .end = PA_SMCR + 0x100 - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_SMBUS, |
| .end = IRQ_SMBUS, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device smbus_device = { |
| .name = "i2c-highlander", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(smbus_resources), |
| .resource = smbus_resources, |
| }; |
| |
| static struct i2c_board_info __initdata highlander_i2c_devices[] = { |
| { |
| I2C_BOARD_INFO("r2025sd", 0x32), |
| }, |
| }; |
| |
| static struct platform_device *r7780rp_devices[] __initdata = { |
| &r8a66597_usb_host_device, |
| &m66592_usb_peripheral_device, |
| &heartbeat_device, |
| &smbus_device, |
| &nor_flash_device, |
| #ifndef CONFIG_SH_R7780RP |
| &ax88796_device, |
| #endif |
| }; |
| |
| /* |
| * The CF is connected using a 16-bit bus where 8-bit operations are |
| * unsupported. The linux ata driver is however using 8-bit operations, so |
| * insert a trapped io filter to convert 8-bit operations into 16-bit. |
| */ |
| static struct trapped_io cf_trapped_io = { |
| .resource = cf_ide_resources, |
| .num_resources = 2, |
| .minimum_bus_width = 16, |
| }; |
| |
| static int __init r7780rp_devices_setup(void) |
| { |
| int ret = 0; |
| |
| #ifndef CONFIG_SH_R7780RP |
| if (register_trapped_io(&cf_trapped_io) == 0) |
| ret |= platform_device_register(&cf_ide_device); |
| #endif |
| |
| ret |= platform_add_devices(r7780rp_devices, |
| ARRAY_SIZE(r7780rp_devices)); |
| |
| ret |= i2c_register_board_info(0, highlander_i2c_devices, |
| ARRAY_SIZE(highlander_i2c_devices)); |
| |
| return ret; |
| } |
| device_initcall(r7780rp_devices_setup); |
| |
| /* |
| * Platform specific clocks |
| */ |
| static int ivdr_clk_enable(struct clk *clk) |
| { |
| ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL); |
| return 0; |
| } |
| |
| static void ivdr_clk_disable(struct clk *clk) |
| { |
| ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL); |
| } |
| |
| static struct clk_ops ivdr_clk_ops = { |
| .enable = ivdr_clk_enable, |
| .disable = ivdr_clk_disable, |
| }; |
| |
| static struct clk ivdr_clk = { |
| .name = "ivdr_clk", |
| .ops = &ivdr_clk_ops, |
| }; |
| |
| static struct clk *r7780rp_clocks[] = { |
| &ivdr_clk, |
| }; |
| |
| static void r7780rp_power_off(void) |
| { |
| if (mach_is_r7780mp() || mach_is_r7785rp()) |
| ctrl_outw(0x0001, PA_POFF); |
| } |
| |
| /* |
| * Initialize the board |
| */ |
| static void __init highlander_setup(char **cmdline_p) |
| { |
| u16 ver = ctrl_inw(PA_VERREG); |
| int i; |
| |
| printk(KERN_INFO "Renesas Solutions Highlander %s support.\n", |
| mach_is_r7780rp() ? "R7780RP-1" : |
| mach_is_r7780mp() ? "R7780MP" : |
| "R7785RP"); |
| |
| printk(KERN_INFO "Board version: %d (revision %d), " |
| "FPGA version: %d (revision %d)\n", |
| (ver >> 12) & 0xf, (ver >> 8) & 0xf, |
| (ver >> 4) & 0xf, ver & 0xf); |
| |
| highlander_plat_pinmux_setup(); |
| |
| /* |
| * Enable the important clocks right away.. |
| */ |
| for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) { |
| struct clk *clk = r7780rp_clocks[i]; |
| |
| clk_register(clk); |
| clk_enable(clk); |
| } |
| |
| ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */ |
| |
| if (mach_is_r7780rp()) |
| ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */ |
| |
| ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */ |
| |
| pm_power_off = r7780rp_power_off; |
| } |
| |
| static unsigned char irl2irq[HL_NR_IRL]; |
| |
| static int highlander_irq_demux(int irq) |
| { |
| if (irq >= HL_NR_IRL || !irl2irq[irq]) |
| return irq; |
| |
| return irl2irq[irq]; |
| } |
| |
| static void __init highlander_init_irq(void) |
| { |
| unsigned char *ucp = highlander_plat_irq_setup(); |
| |
| if (ucp) { |
| plat_irq_setup_pins(IRQ_MODE_IRL3210); |
| memcpy(irl2irq, ucp, HL_NR_IRL); |
| } |
| } |
| |
| /* |
| * The Machine Vector |
| */ |
| static struct sh_machine_vector mv_highlander __initmv = { |
| .mv_name = "Highlander", |
| .mv_setup = highlander_setup, |
| .mv_init_irq = highlander_init_irq, |
| .mv_irq_demux = highlander_irq_demux, |
| }; |