arch/arm/mach-realview/include/mach/irqs-pbx.h - kernel/prism - Git at Google

 /*
  * arch/arm/mach-realview/include/mach/irqs-pbx.h
  *
  * Copyright (C) 2009 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */

 #ifndef __MACH_IRQS_PBX_H
 #define __MACH_IRQS_PBX_H

 #define IRQ_PBX_GIC_START			32

 /* L220
 #define IRQ_PBX_L220_EVENT	(IRQ_PBX_GIC_START + 29)
 #define IRQ_PBX_L220_SLAVE	(IRQ_PBX_GIC_START + 30)
 #define IRQ_PBX_L220_DECODE	(IRQ_PBX_GIC_START + 31)
 */

 /*
  * PBX on-board gic irq sources
  */
 #define IRQ_PBX_WATCHDOG	(IRQ_PBX_GIC_START + 0)	/* Watchdog timer */
 #define IRQ_PBX_SOFT		(IRQ_PBX_GIC_START + 1)	/* Software interrupt */
 #define IRQ_PBX_COMMRx		(IRQ_PBX_GIC_START + 2)	/* Debug Comm Rx interrupt */
 #define IRQ_PBX_COMMTx		(IRQ_PBX_GIC_START + 3)	/* Debug Comm Tx interrupt */
 #define IRQ_PBX_TIMER0_1	(IRQ_PBX_GIC_START + 4)	/* Timer 0/1 (default timer) */
 #define IRQ_PBX_TIMER2_3	(IRQ_PBX_GIC_START + 5)	/* Timer 2/3 */
 #define IRQ_PBX_GPIO0		(IRQ_PBX_GIC_START + 6)	/* GPIO 0 */
 #define IRQ_PBX_GPIO1		(IRQ_PBX_GIC_START + 7)	/* GPIO 1 */
 #define IRQ_PBX_GPIO2		(IRQ_PBX_GIC_START + 8)	/* GPIO 2 */
 								/* 9 reserved */
 #define IRQ_PBX_RTC		(IRQ_PBX_GIC_START + 10)	/* Real Time Clock */
 #define IRQ_PBX_SSP		(IRQ_PBX_GIC_START + 11)	/* Synchronous Serial Port */
 #define IRQ_PBX_UART0		(IRQ_PBX_GIC_START + 12)	/* UART 0 on development chip */
 #define IRQ_PBX_UART1		(IRQ_PBX_GIC_START + 13)	/* UART 1 on development chip */
 #define IRQ_PBX_UART2		(IRQ_PBX_GIC_START + 14)	/* UART 2 on development chip */
 #define IRQ_PBX_UART3		(IRQ_PBX_GIC_START + 15)	/* UART 3 on development chip */
 #define IRQ_PBX_SCI		(IRQ_PBX_GIC_START + 16)	/* Smart Card Interface */
 #define IRQ_PBX_MMCI0A		(IRQ_PBX_GIC_START + 17)	/* Multimedia Card 0A */
 #define IRQ_PBX_MMCI0B		(IRQ_PBX_GIC_START + 18)	/* Multimedia Card 0B */
 #define IRQ_PBX_AACI		(IRQ_PBX_GIC_START + 19)	/* Audio Codec */
 #define IRQ_PBX_KMI0		(IRQ_PBX_GIC_START + 20)	/* Keyboard/Mouse port 0 */
 #define IRQ_PBX_KMI1		(IRQ_PBX_GIC_START + 21)	/* Keyboard/Mouse port 1 */
 #define IRQ_PBX_CHARLCD		(IRQ_PBX_GIC_START + 22)	/* Character LCD */
 #define IRQ_PBX_CLCD		(IRQ_PBX_GIC_START + 23)	/* CLCD controller */
 #define IRQ_PBX_DMAC		(IRQ_PBX_GIC_START + 24)	/* DMA controller */
 #define IRQ_PBX_PWRFAIL		(IRQ_PBX_GIC_START + 25)	/* Power failure */
 #define IRQ_PBX_PISMO		(IRQ_PBX_GIC_START + 26)	/* PISMO interface */
 #define IRQ_PBX_DoC		(IRQ_PBX_GIC_START + 27)	/* Disk on Chip memory controller */
 #define IRQ_PBX_ETH		(IRQ_PBX_GIC_START + 28)	/* Ethernet controller */
 #define IRQ_PBX_USB		(IRQ_PBX_GIC_START + 29)	/* USB controller */
 #define IRQ_PBX_TSPEN		(IRQ_PBX_GIC_START + 30)	/* Touchscreen pen */
 #define IRQ_PBX_TSKPAD		(IRQ_PBX_GIC_START + 31)	/* Touchscreen keypad */

 #define IRQ_PBX_PMU_SCU0        (IRQ_PBX_GIC_START + 32)        /* SCU PMU Interrupts (11mp) */
 #define IRQ_PBX_PMU_SCU1        (IRQ_PBX_GIC_START + 33)
 #define IRQ_PBX_PMU_SCU2        (IRQ_PBX_GIC_START + 34)
 #define IRQ_PBX_PMU_SCU3        (IRQ_PBX_GIC_START + 35)
 #define IRQ_PBX_PMU_SCU4        (IRQ_PBX_GIC_START + 36)
 #define IRQ_PBX_PMU_SCU5        (IRQ_PBX_GIC_START + 37)
 #define IRQ_PBX_PMU_SCU6        (IRQ_PBX_GIC_START + 38)
 #define IRQ_PBX_PMU_SCU7        (IRQ_PBX_GIC_START + 39)

 #define IRQ_PBX_WATCHDOG1       (IRQ_PBX_GIC_START + 40)        /* Watchdog1 timer */
 #define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
 #define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
 /* ... */
 #define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
 #define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 45)
 #define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 46)
 #define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 47)

 /* ... */
 #define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)
 #define IRQ_PBX_PCI1		(IRQ_PBX_GIC_START + 51)
 #define IRQ_PBX_PCI2		(IRQ_PBX_GIC_START + 52)
 #define IRQ_PBX_PCI3		(IRQ_PBX_GIC_START + 53)

 #define IRQ_PBX_SMC		-1
 #define IRQ_PBX_SCTL		-1

 #define NR_GIC_PBX		1

 /*
  * Only define NR_IRQS if less than NR_IRQS_PBX
  */
 #define NR_IRQS_PBX		(IRQ_PBX_GIC_START + 96)

 #if defined(CONFIG_MACH_REALVIEW_PBX)

 #if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
 #undef NR_IRQS
 #define NR_IRQS			NR_IRQS_PBX
 #endif

 #if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
 #undef MAX_GIC_NR
 #define MAX_GIC_NR		NR_GIC_PBX
 #endif

 #endif	/* CONFIG_MACH_REALVIEW_PBX */

 #endif	/* __MACH_IRQS_PBX_H */
	/*
	* arch/arm/mach-realview/include/mach/irqs-pbx.h
	*
	* Copyright (C) 2009 ARM Limited
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*/

	#ifndef __MACH_IRQS_PBX_H
	#define __MACH_IRQS_PBX_H

	#define IRQ_PBX_GIC_START 32

	/* L220
	#define IRQ_PBX_L220_EVENT (IRQ_PBX_GIC_START + 29)
	#define IRQ_PBX_L220_SLAVE (IRQ_PBX_GIC_START + 30)
	#define IRQ_PBX_L220_DECODE (IRQ_PBX_GIC_START + 31)
	*/

	/*
	* PBX on-board gic irq sources
	*/
	#define IRQ_PBX_WATCHDOG (IRQ_PBX_GIC_START + 0) /* Watchdog timer */
	#define IRQ_PBX_SOFT (IRQ_PBX_GIC_START + 1) /* Software interrupt */
	#define IRQ_PBX_COMMRx (IRQ_PBX_GIC_START + 2) /* Debug Comm Rx interrupt */
	#define IRQ_PBX_COMMTx (IRQ_PBX_GIC_START + 3) /* Debug Comm Tx interrupt */
	#define IRQ_PBX_TIMER0_1 (IRQ_PBX_GIC_START + 4) /* Timer 0/1 (default timer) */
	#define IRQ_PBX_TIMER2_3 (IRQ_PBX_GIC_START + 5) /* Timer 2/3 */
	#define IRQ_PBX_GPIO0 (IRQ_PBX_GIC_START + 6) /* GPIO 0 */
	#define IRQ_PBX_GPIO1 (IRQ_PBX_GIC_START + 7) /* GPIO 1 */
	#define IRQ_PBX_GPIO2 (IRQ_PBX_GIC_START + 8) /* GPIO 2 */
	/* 9 reserved */
	#define IRQ_PBX_RTC (IRQ_PBX_GIC_START + 10) /* Real Time Clock */
	#define IRQ_PBX_SSP (IRQ_PBX_GIC_START + 11) /* Synchronous Serial Port */
	#define IRQ_PBX_UART0 (IRQ_PBX_GIC_START + 12) /* UART 0 on development chip */
	#define IRQ_PBX_UART1 (IRQ_PBX_GIC_START + 13) /* UART 1 on development chip */
	#define IRQ_PBX_UART2 (IRQ_PBX_GIC_START + 14) /* UART 2 on development chip */
	#define IRQ_PBX_UART3 (IRQ_PBX_GIC_START + 15) /* UART 3 on development chip */
	#define IRQ_PBX_SCI (IRQ_PBX_GIC_START + 16) /* Smart Card Interface */
	#define IRQ_PBX_MMCI0A (IRQ_PBX_GIC_START + 17) /* Multimedia Card 0A */
	#define IRQ_PBX_MMCI0B (IRQ_PBX_GIC_START + 18) /* Multimedia Card 0B */
	#define IRQ_PBX_AACI (IRQ_PBX_GIC_START + 19) /* Audio Codec */
	#define IRQ_PBX_KMI0 (IRQ_PBX_GIC_START + 20) /* Keyboard/Mouse port 0 */
	#define IRQ_PBX_KMI1 (IRQ_PBX_GIC_START + 21) /* Keyboard/Mouse port 1 */
	#define IRQ_PBX_CHARLCD (IRQ_PBX_GIC_START + 22) /* Character LCD */
	#define IRQ_PBX_CLCD (IRQ_PBX_GIC_START + 23) /* CLCD controller */
	#define IRQ_PBX_DMAC (IRQ_PBX_GIC_START + 24) /* DMA controller */
	#define IRQ_PBX_PWRFAIL (IRQ_PBX_GIC_START + 25) /* Power failure */
	#define IRQ_PBX_PISMO (IRQ_PBX_GIC_START + 26) /* PISMO interface */
	#define IRQ_PBX_DoC (IRQ_PBX_GIC_START + 27) /* Disk on Chip memory controller */
	#define IRQ_PBX_ETH (IRQ_PBX_GIC_START + 28) /* Ethernet controller */
	#define IRQ_PBX_USB (IRQ_PBX_GIC_START + 29) /* USB controller */
	#define IRQ_PBX_TSPEN (IRQ_PBX_GIC_START + 30) /* Touchscreen pen */
	#define IRQ_PBX_TSKPAD (IRQ_PBX_GIC_START + 31) /* Touchscreen keypad */

	#define IRQ_PBX_PMU_SCU0 (IRQ_PBX_GIC_START + 32) /* SCU PMU Interrupts (11mp) */
	#define IRQ_PBX_PMU_SCU1 (IRQ_PBX_GIC_START + 33)
	#define IRQ_PBX_PMU_SCU2 (IRQ_PBX_GIC_START + 34)
	#define IRQ_PBX_PMU_SCU3 (IRQ_PBX_GIC_START + 35)
	#define IRQ_PBX_PMU_SCU4 (IRQ_PBX_GIC_START + 36)
	#define IRQ_PBX_PMU_SCU5 (IRQ_PBX_GIC_START + 37)
	#define IRQ_PBX_PMU_SCU6 (IRQ_PBX_GIC_START + 38)
	#define IRQ_PBX_PMU_SCU7 (IRQ_PBX_GIC_START + 39)

	#define IRQ_PBX_WATCHDOG1 (IRQ_PBX_GIC_START + 40) /* Watchdog1 timer */
	#define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */
	#define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */
	/* ... */
	#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */
	#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 45)
	#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 46)
	#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 47)

	/* ... */
	#define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50)
	#define IRQ_PBX_PCI1 (IRQ_PBX_GIC_START + 51)
	#define IRQ_PBX_PCI2 (IRQ_PBX_GIC_START + 52)
	#define IRQ_PBX_PCI3 (IRQ_PBX_GIC_START + 53)

	#define IRQ_PBX_SMC -1
	#define IRQ_PBX_SCTL -1

	#define NR_GIC_PBX 1

	/*
	* Only define NR_IRQS if less than NR_IRQS_PBX
	*/
	#define NR_IRQS_PBX (IRQ_PBX_GIC_START + 96)

	#if defined(CONFIG_MACH_REALVIEW_PBX)

	#if !defined(NR_IRQS) \|\| (NR_IRQS < NR_IRQS_PBX)
	#undef NR_IRQS
	#define NR_IRQS NR_IRQS_PBX
	#endif

	#if !defined(MAX_GIC_NR) \|\| (MAX_GIC_NR < NR_GIC_PBX)
	#undef MAX_GIC_NR
	#define MAX_GIC_NR NR_GIC_PBX
	#endif

	#endif /* CONFIG_MACH_REALVIEW_PBX */

	#endif /* __MACH_IRQS_PBX_H */