| /* linux/include/asm-arm/plat-s3c24xx/map.h |
| * |
| * Copyright (c) 2008 Simtec Electronics |
| * Ben Dooks <ben@simtec.co.uk> |
| * |
| * S3C24XX - Memory map definitions |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef __ASM_PLAT_S3C24XX_MAP_H |
| #define __ASM_PLAT_S3C24XX_MAP_H |
| |
| /* interrupt controller is the first thing we put in, to make |
| * the assembly code for the irq detection easier |
| */ |
| #define S3C24XX_VA_IRQ S3C_VA_IRQ |
| #define S3C2410_PA_IRQ (0x4A000000) |
| #define S3C24XX_SZ_IRQ SZ_1M |
| |
| /* memory controller registers */ |
| #define S3C24XX_VA_MEMCTRL S3C_VA_MEM |
| #define S3C2410_PA_MEMCTRL (0x48000000) |
| #define S3C24XX_SZ_MEMCTRL SZ_1M |
| |
| /* UARTs */ |
| #define S3C24XX_VA_UART S3C_VA_UART |
| #define S3C2410_PA_UART (0x50000000) |
| #define S3C24XX_SZ_UART SZ_1M |
| #define S3C_UART_OFFSET (0x4000) |
| |
| #define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) |
| |
| /* Timers */ |
| #define S3C24XX_VA_TIMER S3C_VA_TIMER |
| #define S3C2410_PA_TIMER (0x51000000) |
| #define S3C24XX_SZ_TIMER SZ_1M |
| |
| /* Clock and Power management */ |
| #define S3C24XX_VA_CLKPWR S3C_VA_SYS |
| #define S3C24XX_SZ_CLKPWR SZ_1M |
| |
| /* USB Device port */ |
| #define S3C2410_PA_USBDEV (0x52000000) |
| #define S3C24XX_SZ_USBDEV SZ_1M |
| |
| /* Watchdog */ |
| #define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG |
| #define S3C2410_PA_WATCHDOG (0x53000000) |
| #define S3C24XX_SZ_WATCHDOG SZ_1M |
| |
| /* Standard size definitions for peripheral blocks. */ |
| |
| #define S3C24XX_SZ_IIS SZ_1M |
| #define S3C24XX_SZ_ADC SZ_1M |
| #define S3C24XX_SZ_SPI SZ_1M |
| #define S3C24XX_SZ_SDI SZ_1M |
| #define S3C24XX_SZ_NAND SZ_1M |
| |
| /* GPIO ports */ |
| |
| /* the calculation for the VA of this must ensure that |
| * it is the same distance apart from the UART in the |
| * phsyical address space, as the initial mapping for the IO |
| * is done as a 1:1 maping. This puts it (currently) at |
| * 0xFA800000, which is not in the way of any current mapping |
| * by the base system. |
| */ |
| |
| #define S3C2410_PA_GPIO (0x56000000) |
| #define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) |
| #define S3C24XX_SZ_GPIO SZ_1M |
| |
| |
| /* ISA style IO, for each machine to sort out mappings for, if it |
| * implements it. We reserve two 16M regions for ISA. |
| */ |
| |
| #define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) |
| #define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) |
| |
| /* deal with the registers that move under the 2412/2413 */ |
| |
| #if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) |
| #ifndef __ASSEMBLY__ |
| extern void __iomem *s3c24xx_va_gpio2; |
| #endif |
| #ifdef CONFIG_CPU_S3C2412_ONLY |
| #define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) |
| #else |
| #define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 |
| #endif |
| #else |
| #define s3c24xx_va_gpio2 S3C24XX_VA_GPIO |
| #define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO |
| #endif |
| |
| #endif /* __ASM_PLAT_S3C24XX_MAP_H */ |
