| /* |
| * Sonics Silicon Backplane |
| * Subsystem core |
| * |
| * Copyright 2005, Broadcom Corporation |
| * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> |
| * |
| * Licensed under the GNU/GPL. See COPYING for details. |
| */ |
| |
| #include "ssb_private.h" |
| |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/ssb/ssb.h> |
| #include <linux/ssb/ssb_regs.h> |
| #include <linux/ssb/ssb_driver_gige.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/pci.h> |
| #include <linux/mmc/sdio_func.h> |
| |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/cs.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/ds.h> |
| |
| |
| MODULE_DESCRIPTION("Sonics Silicon Backplane driver"); |
| MODULE_LICENSE("GPL"); |
| |
| |
| /* Temporary list of yet-to-be-attached buses */ |
| static LIST_HEAD(attach_queue); |
| /* List if running buses */ |
| static LIST_HEAD(buses); |
| /* Software ID counter */ |
| static unsigned int next_busnumber; |
| /* buses_mutes locks the two buslists and the next_busnumber. |
| * Don't lock this directly, but use ssb_buses_[un]lock() below. */ |
| static DEFINE_MUTEX(buses_mutex); |
| |
| /* There are differences in the codeflow, if the bus is |
| * initialized from early boot, as various needed services |
| * are not available early. This is a mechanism to delay |
| * these initializations to after early boot has finished. |
| * It's also used to avoid mutex locking, as that's not |
| * available and needed early. */ |
| static bool ssb_is_early_boot = 1; |
| |
| static void ssb_buses_lock(void); |
| static void ssb_buses_unlock(void); |
| |
| |
| #ifdef CONFIG_SSB_PCIHOST |
| struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev) |
| { |
| struct ssb_bus *bus; |
| |
| ssb_buses_lock(); |
| list_for_each_entry(bus, &buses, list) { |
| if (bus->bustype == SSB_BUSTYPE_PCI && |
| bus->host_pci == pdev) |
| goto found; |
| } |
| bus = NULL; |
| found: |
| ssb_buses_unlock(); |
| |
| return bus; |
| } |
| #endif /* CONFIG_SSB_PCIHOST */ |
| |
| #ifdef CONFIG_SSB_PCMCIAHOST |
| struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev) |
| { |
| struct ssb_bus *bus; |
| |
| ssb_buses_lock(); |
| list_for_each_entry(bus, &buses, list) { |
| if (bus->bustype == SSB_BUSTYPE_PCMCIA && |
| bus->host_pcmcia == pdev) |
| goto found; |
| } |
| bus = NULL; |
| found: |
| ssb_buses_unlock(); |
| |
| return bus; |
| } |
| #endif /* CONFIG_SSB_PCMCIAHOST */ |
| |
| #ifdef CONFIG_SSB_SDIOHOST |
| struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func) |
| { |
| struct ssb_bus *bus; |
| |
| ssb_buses_lock(); |
| list_for_each_entry(bus, &buses, list) { |
| if (bus->bustype == SSB_BUSTYPE_SDIO && |
| bus->host_sdio == func) |
| goto found; |
| } |
| bus = NULL; |
| found: |
| ssb_buses_unlock(); |
| |
| return bus; |
| } |
| #endif /* CONFIG_SSB_SDIOHOST */ |
| |
| int ssb_for_each_bus_call(unsigned long data, |
| int (*func)(struct ssb_bus *bus, unsigned long data)) |
| { |
| struct ssb_bus *bus; |
| int res; |
| |
| ssb_buses_lock(); |
| list_for_each_entry(bus, &buses, list) { |
| res = func(bus, data); |
| if (res >= 0) { |
| ssb_buses_unlock(); |
| return res; |
| } |
| } |
| ssb_buses_unlock(); |
| |
| return -ENODEV; |
| } |
| |
| static struct ssb_device *ssb_device_get(struct ssb_device *dev) |
| { |
| if (dev) |
| get_device(dev->dev); |
| return dev; |
| } |
| |
| static void ssb_device_put(struct ssb_device *dev) |
| { |
| if (dev) |
| put_device(dev->dev); |
| } |
| |
| static int ssb_device_resume(struct device *dev) |
| { |
| struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); |
| struct ssb_driver *ssb_drv; |
| int err = 0; |
| |
| if (dev->driver) { |
| ssb_drv = drv_to_ssb_drv(dev->driver); |
| if (ssb_drv && ssb_drv->resume) |
| err = ssb_drv->resume(ssb_dev); |
| if (err) |
| goto out; |
| } |
| out: |
| return err; |
| } |
| |
| static int ssb_device_suspend(struct device *dev, pm_message_t state) |
| { |
| struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); |
| struct ssb_driver *ssb_drv; |
| int err = 0; |
| |
| if (dev->driver) { |
| ssb_drv = drv_to_ssb_drv(dev->driver); |
| if (ssb_drv && ssb_drv->suspend) |
| err = ssb_drv->suspend(ssb_dev, state); |
| if (err) |
| goto out; |
| } |
| out: |
| return err; |
| } |
| |
| int ssb_bus_resume(struct ssb_bus *bus) |
| { |
| int err; |
| |
| /* Reset HW state information in memory, so that HW is |
| * completely reinitialized. */ |
| bus->mapped_device = NULL; |
| #ifdef CONFIG_SSB_DRIVER_PCICORE |
| bus->pcicore.setup_done = 0; |
| #endif |
| |
| err = ssb_bus_powerup(bus, 0); |
| if (err) |
| return err; |
| err = ssb_pcmcia_hardware_setup(bus); |
| if (err) { |
| ssb_bus_may_powerdown(bus); |
| return err; |
| } |
| ssb_chipco_resume(&bus->chipco); |
| ssb_bus_may_powerdown(bus); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(ssb_bus_resume); |
| |
| int ssb_bus_suspend(struct ssb_bus *bus) |
| { |
| ssb_chipco_suspend(&bus->chipco); |
| ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(ssb_bus_suspend); |
| |
| #ifdef CONFIG_SSB_SPROM |
| int ssb_devices_freeze(struct ssb_bus *bus) |
| { |
| struct ssb_device *dev; |
| struct ssb_driver *drv; |
| int err = 0; |
| int i; |
| pm_message_t state = PMSG_FREEZE; |
| |
| /* First check that we are capable to freeze all devices. */ |
| for (i = 0; i < bus->nr_devices; i++) { |
| dev = &(bus->devices[i]); |
| if (!dev->dev || |
| !dev->dev->driver || |
| !device_is_registered(dev->dev)) |
| continue; |
| drv = drv_to_ssb_drv(dev->dev->driver); |
| if (!drv) |
| continue; |
| if (!drv->suspend) { |
| /* Nope, can't suspend this one. */ |
| return -EOPNOTSUPP; |
| } |
| } |
| /* Now suspend all devices */ |
| for (i = 0; i < bus->nr_devices; i++) { |
| dev = &(bus->devices[i]); |
| if (!dev->dev || |
| !dev->dev->driver || |
| !device_is_registered(dev->dev)) |
| continue; |
| drv = drv_to_ssb_drv(dev->dev->driver); |
| if (!drv) |
| continue; |
| err = drv->suspend(dev, state); |
| if (err) { |
| ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n", |
| dev_name(dev->dev)); |
| goto err_unwind; |
| } |
| } |
| |
| return 0; |
| err_unwind: |
| for (i--; i >= 0; i--) { |
| dev = &(bus->devices[i]); |
| if (!dev->dev || |
| !dev->dev->driver || |
| !device_is_registered(dev->dev)) |
| continue; |
| drv = drv_to_ssb_drv(dev->dev->driver); |
| if (!drv) |
| continue; |
| if (drv->resume) |
| drv->resume(dev); |
| } |
| return err; |
| } |
| |
| int ssb_devices_thaw(struct ssb_bus *bus) |
| { |
| struct ssb_device *dev; |
| struct ssb_driver *drv; |
| int err; |
| int i; |
| |
| for (i = 0; i < bus->nr_devices; i++) { |
| dev = &(bus->devices[i]); |
| if (!dev->dev || |
| !dev->dev->driver || |
| !device_is_registered(dev->dev)) |
| continue; |
| drv = drv_to_ssb_drv(dev->dev->driver); |
| if (!drv) |
| continue; |
| if (SSB_WARN_ON(!drv->resume)) |
| continue; |
| err = drv->resume(dev); |
| if (err) { |
| ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n", |
| dev_name(dev->dev)); |
| } |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_SSB_SPROM */ |
| |
| static void ssb_device_shutdown(struct device *dev) |
| { |
| struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); |
| struct ssb_driver *ssb_drv; |
| |
| if (!dev->driver) |
| return; |
| ssb_drv = drv_to_ssb_drv(dev->driver); |
| if (ssb_drv && ssb_drv->shutdown) |
| ssb_drv->shutdown(ssb_dev); |
| } |
| |
| static int ssb_device_remove(struct device *dev) |
| { |
| struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); |
| struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver); |
| |
| if (ssb_drv && ssb_drv->remove) |
| ssb_drv->remove(ssb_dev); |
| ssb_device_put(ssb_dev); |
| |
| return 0; |
| } |
| |
| static int ssb_device_probe(struct device *dev) |
| { |
| struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); |
| struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver); |
| int err = 0; |
| |
| ssb_device_get(ssb_dev); |
| if (ssb_drv && ssb_drv->probe) |
| err = ssb_drv->probe(ssb_dev, &ssb_dev->id); |
| if (err) |
| ssb_device_put(ssb_dev); |
| |
| return err; |
| } |
| |
| static int ssb_match_devid(const struct ssb_device_id *tabid, |
| const struct ssb_device_id *devid) |
| { |
| if ((tabid->vendor != devid->vendor) && |
| tabid->vendor != SSB_ANY_VENDOR) |
| return 0; |
| if ((tabid->coreid != devid->coreid) && |
| tabid->coreid != SSB_ANY_ID) |
| return 0; |
| if ((tabid->revision != devid->revision) && |
| tabid->revision != SSB_ANY_REV) |
| return 0; |
| return 1; |
| } |
| |
| static int ssb_bus_match(struct device *dev, struct device_driver *drv) |
| { |
| struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); |
| struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv); |
| const struct ssb_device_id *id; |
| |
| for (id = ssb_drv->id_table; |
| id->vendor || id->coreid || id->revision; |
| id++) { |
| if (ssb_match_devid(id, &ssb_dev->id)) |
| return 1; /* found */ |
| } |
| |
| return 0; |
| } |
| |
| static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env) |
| { |
| struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); |
| |
| if (!dev) |
| return -ENODEV; |
| |
| return add_uevent_var(env, |
| "MODALIAS=ssb:v%04Xid%04Xrev%02X", |
| ssb_dev->id.vendor, ssb_dev->id.coreid, |
| ssb_dev->id.revision); |
| } |
| |
| static struct bus_type ssb_bustype = { |
| .name = "ssb", |
| .match = ssb_bus_match, |
| .probe = ssb_device_probe, |
| .remove = ssb_device_remove, |
| .shutdown = ssb_device_shutdown, |
| .suspend = ssb_device_suspend, |
| .resume = ssb_device_resume, |
| .uevent = ssb_device_uevent, |
| }; |
| |
| static void ssb_buses_lock(void) |
| { |
| /* See the comment at the ssb_is_early_boot definition */ |
| if (!ssb_is_early_boot) |
| mutex_lock(&buses_mutex); |
| } |
| |
| static void ssb_buses_unlock(void) |
| { |
| /* See the comment at the ssb_is_early_boot definition */ |
| if (!ssb_is_early_boot) |
| mutex_unlock(&buses_mutex); |
| } |
| |
| static void ssb_devices_unregister(struct ssb_bus *bus) |
| { |
| struct ssb_device *sdev; |
| int i; |
| |
| for (i = bus->nr_devices - 1; i >= 0; i--) { |
| sdev = &(bus->devices[i]); |
| if (sdev->dev) |
| device_unregister(sdev->dev); |
| } |
| } |
| |
| void ssb_bus_unregister(struct ssb_bus *bus) |
| { |
| ssb_buses_lock(); |
| ssb_devices_unregister(bus); |
| list_del(&bus->list); |
| ssb_buses_unlock(); |
| |
| ssb_pcmcia_exit(bus); |
| ssb_pci_exit(bus); |
| ssb_iounmap(bus); |
| } |
| EXPORT_SYMBOL(ssb_bus_unregister); |
| |
| static void ssb_release_dev(struct device *dev) |
| { |
| struct __ssb_dev_wrapper *devwrap; |
| |
| devwrap = container_of(dev, struct __ssb_dev_wrapper, dev); |
| kfree(devwrap); |
| } |
| |
| static int ssb_devices_register(struct ssb_bus *bus) |
| { |
| struct ssb_device *sdev; |
| struct device *dev; |
| struct __ssb_dev_wrapper *devwrap; |
| int i, err = 0; |
| int dev_idx = 0; |
| |
| for (i = 0; i < bus->nr_devices; i++) { |
| sdev = &(bus->devices[i]); |
| |
| /* We don't register SSB-system devices to the kernel, |
| * as the drivers for them are built into SSB. */ |
| switch (sdev->id.coreid) { |
| case SSB_DEV_CHIPCOMMON: |
| case SSB_DEV_PCI: |
| case SSB_DEV_PCIE: |
| case SSB_DEV_PCMCIA: |
| case SSB_DEV_MIPS: |
| case SSB_DEV_MIPS_3302: |
| case SSB_DEV_EXTIF: |
| continue; |
| } |
| |
| devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL); |
| if (!devwrap) { |
| ssb_printk(KERN_ERR PFX |
| "Could not allocate device\n"); |
| err = -ENOMEM; |
| goto error; |
| } |
| dev = &devwrap->dev; |
| devwrap->sdev = sdev; |
| |
| dev->release = ssb_release_dev; |
| dev->bus = &ssb_bustype; |
| dev_set_name(dev, "ssb%u:%d", bus->busnumber, dev_idx); |
| |
| switch (bus->bustype) { |
| case SSB_BUSTYPE_PCI: |
| #ifdef CONFIG_SSB_PCIHOST |
| sdev->irq = bus->host_pci->irq; |
| dev->parent = &bus->host_pci->dev; |
| #endif |
| break; |
| case SSB_BUSTYPE_PCMCIA: |
| #ifdef CONFIG_SSB_PCMCIAHOST |
| sdev->irq = bus->host_pcmcia->irq.AssignedIRQ; |
| dev->parent = &bus->host_pcmcia->dev; |
| #endif |
| break; |
| case SSB_BUSTYPE_SDIO: |
| #ifdef CONFIG_SSB_SDIO |
| sdev->irq = bus->host_sdio->dev.irq; |
| dev->parent = &bus->host_sdio->dev; |
| #endif |
| break; |
| case SSB_BUSTYPE_SSB: |
| dev->dma_mask = &dev->coherent_dma_mask; |
| break; |
| } |
| |
| sdev->dev = dev; |
| err = device_register(dev); |
| if (err) { |
| ssb_printk(KERN_ERR PFX |
| "Could not register %s\n", |
| dev_name(dev)); |
| /* Set dev to NULL to not unregister |
| * dev on error unwinding. */ |
| sdev->dev = NULL; |
| kfree(devwrap); |
| goto error; |
| } |
| dev_idx++; |
| } |
| |
| return 0; |
| error: |
| /* Unwind the already registered devices. */ |
| ssb_devices_unregister(bus); |
| return err; |
| } |
| |
| /* Needs ssb_buses_lock() */ |
| static int ssb_attach_queued_buses(void) |
| { |
| struct ssb_bus *bus, *n; |
| int err = 0; |
| int drop_them_all = 0; |
| |
| list_for_each_entry_safe(bus, n, &attach_queue, list) { |
| if (drop_them_all) { |
| list_del(&bus->list); |
| continue; |
| } |
| /* Can't init the PCIcore in ssb_bus_register(), as that |
| * is too early in boot for embedded systems |
| * (no udelay() available). So do it here in attach stage. |
| */ |
| err = ssb_bus_powerup(bus, 0); |
| if (err) |
| goto error; |
| ssb_pcicore_init(&bus->pcicore); |
| ssb_bus_may_powerdown(bus); |
| |
| err = ssb_devices_register(bus); |
| error: |
| if (err) { |
| drop_them_all = 1; |
| list_del(&bus->list); |
| continue; |
| } |
| list_move_tail(&bus->list, &buses); |
| } |
| |
| return err; |
| } |
| |
| static u8 ssb_ssb_read8(struct ssb_device *dev, u16 offset) |
| { |
| struct ssb_bus *bus = dev->bus; |
| |
| offset += dev->core_index * SSB_CORE_SIZE; |
| return readb(bus->mmio + offset); |
| } |
| |
| static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset) |
| { |
| struct ssb_bus *bus = dev->bus; |
| |
| offset += dev->core_index * SSB_CORE_SIZE; |
| return readw(bus->mmio + offset); |
| } |
| |
| static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset) |
| { |
| struct ssb_bus *bus = dev->bus; |
| |
| offset += dev->core_index * SSB_CORE_SIZE; |
| return readl(bus->mmio + offset); |
| } |
| |
| #ifdef CONFIG_SSB_BLOCKIO |
| static void ssb_ssb_block_read(struct ssb_device *dev, void *buffer, |
| size_t count, u16 offset, u8 reg_width) |
| { |
| struct ssb_bus *bus = dev->bus; |
| void __iomem *addr; |
| |
| offset += dev->core_index * SSB_CORE_SIZE; |
| addr = bus->mmio + offset; |
| |
| switch (reg_width) { |
| case sizeof(u8): { |
| u8 *buf = buffer; |
| |
| while (count) { |
| *buf = __raw_readb(addr); |
| buf++; |
| count--; |
| } |
| break; |
| } |
| case sizeof(u16): { |
| __le16 *buf = buffer; |
| |
| SSB_WARN_ON(count & 1); |
| while (count) { |
| *buf = (__force __le16)__raw_readw(addr); |
| buf++; |
| count -= 2; |
| } |
| break; |
| } |
| case sizeof(u32): { |
| __le32 *buf = buffer; |
| |
| SSB_WARN_ON(count & 3); |
| while (count) { |
| *buf = (__force __le32)__raw_readl(addr); |
| buf++; |
| count -= 4; |
| } |
| break; |
| } |
| default: |
| SSB_WARN_ON(1); |
| } |
| } |
| #endif /* CONFIG_SSB_BLOCKIO */ |
| |
| static void ssb_ssb_write8(struct ssb_device *dev, u16 offset, u8 value) |
| { |
| struct ssb_bus *bus = dev->bus; |
| |
| offset += dev->core_index * SSB_CORE_SIZE; |
| writeb(value, bus->mmio + offset); |
| } |
| |
| static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value) |
| { |
| struct ssb_bus *bus = dev->bus; |
| |
| offset += dev->core_index * SSB_CORE_SIZE; |
| writew(value, bus->mmio + offset); |
| } |
| |
| static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value) |
| { |
| struct ssb_bus *bus = dev->bus; |
| |
| offset += dev->core_index * SSB_CORE_SIZE; |
| writel(value, bus->mmio + offset); |
| } |
| |
| #ifdef CONFIG_SSB_BLOCKIO |
| static void ssb_ssb_block_write(struct ssb_device *dev, const void *buffer, |
| size_t count, u16 offset, u8 reg_width) |
| { |
| struct ssb_bus *bus = dev->bus; |
| void __iomem *addr; |
| |
| offset += dev->core_index * SSB_CORE_SIZE; |
| addr = bus->mmio + offset; |
| |
| switch (reg_width) { |
| case sizeof(u8): { |
| const u8 *buf = buffer; |
| |
| while (count) { |
| __raw_writeb(*buf, addr); |
| buf++; |
| count--; |
| } |
| break; |
| } |
| case sizeof(u16): { |
| const __le16 *buf = buffer; |
| |
| SSB_WARN_ON(count & 1); |
| while (count) { |
| __raw_writew((__force u16)(*buf), addr); |
| buf++; |
| count -= 2; |
| } |
| break; |
| } |
| case sizeof(u32): { |
| const __le32 *buf = buffer; |
| |
| SSB_WARN_ON(count & 3); |
| while (count) { |
| __raw_writel((__force u32)(*buf), addr); |
| buf++; |
| count -= 4; |
| } |
| break; |
| } |
| default: |
| SSB_WARN_ON(1); |
| } |
| } |
| #endif /* CONFIG_SSB_BLOCKIO */ |
| |
| /* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */ |
| static const struct ssb_bus_ops ssb_ssb_ops = { |
| .read8 = ssb_ssb_read8, |
| .read16 = ssb_ssb_read16, |
| .read32 = ssb_ssb_read32, |
| .write8 = ssb_ssb_write8, |
| .write16 = ssb_ssb_write16, |
| .write32 = ssb_ssb_write32, |
| #ifdef CONFIG_SSB_BLOCKIO |
| .block_read = ssb_ssb_block_read, |
| .block_write = ssb_ssb_block_write, |
| #endif |
| }; |
| |
| static int ssb_fetch_invariants(struct ssb_bus *bus, |
| ssb_invariants_func_t get_invariants) |
| { |
| struct ssb_init_invariants iv; |
| int err; |
| |
| memset(&iv, 0, sizeof(iv)); |
| err = get_invariants(bus, &iv); |
| if (err) |
| goto out; |
| memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo)); |
| memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom)); |
| bus->has_cardbus_slot = iv.has_cardbus_slot; |
| out: |
| return err; |
| } |
| |
| static int ssb_bus_register(struct ssb_bus *bus, |
| ssb_invariants_func_t get_invariants, |
| unsigned long baseaddr) |
| { |
| int err; |
| |
| spin_lock_init(&bus->bar_lock); |
| INIT_LIST_HEAD(&bus->list); |
| #ifdef CONFIG_SSB_EMBEDDED |
| spin_lock_init(&bus->gpio_lock); |
| #endif |
| |
| /* Powerup the bus */ |
| err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); |
| if (err) |
| goto out; |
| |
| /* Init SDIO-host device (if any), before the scan */ |
| err = ssb_sdio_init(bus); |
| if (err) |
| goto err_disable_xtal; |
| |
| ssb_buses_lock(); |
| bus->busnumber = next_busnumber; |
| /* Scan for devices (cores) */ |
| err = ssb_bus_scan(bus, baseaddr); |
| if (err) |
| goto err_sdio_exit; |
| |
| /* Init PCI-host device (if any) */ |
| err = ssb_pci_init(bus); |
| if (err) |
| goto err_unmap; |
| /* Init PCMCIA-host device (if any) */ |
| err = ssb_pcmcia_init(bus); |
| if (err) |
| goto err_pci_exit; |
| |
| /* Initialize basic system devices (if available) */ |
| err = ssb_bus_powerup(bus, 0); |
| if (err) |
| goto err_pcmcia_exit; |
| ssb_chipcommon_init(&bus->chipco); |
| ssb_mipscore_init(&bus->mipscore); |
| err = ssb_fetch_invariants(bus, get_invariants); |
| if (err) { |
| ssb_bus_may_powerdown(bus); |
| goto err_pcmcia_exit; |
| } |
| ssb_bus_may_powerdown(bus); |
| |
| /* Queue it for attach. |
| * See the comment at the ssb_is_early_boot definition. */ |
| list_add_tail(&bus->list, &attach_queue); |
| if (!ssb_is_early_boot) { |
| /* This is not early boot, so we must attach the bus now */ |
| err = ssb_attach_queued_buses(); |
| if (err) |
| goto err_dequeue; |
| } |
| next_busnumber++; |
| ssb_buses_unlock(); |
| |
| out: |
| return err; |
| |
| err_dequeue: |
| list_del(&bus->list); |
| err_pcmcia_exit: |
| ssb_pcmcia_exit(bus); |
| err_pci_exit: |
| ssb_pci_exit(bus); |
| err_unmap: |
| ssb_iounmap(bus); |
| err_sdio_exit: |
| ssb_sdio_exit(bus); |
| err_disable_xtal: |
| ssb_buses_unlock(); |
| ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); |
| return err; |
| } |
| |
| #ifdef CONFIG_SSB_PCIHOST |
| int ssb_bus_pcibus_register(struct ssb_bus *bus, |
| struct pci_dev *host_pci) |
| { |
| int err; |
| |
| bus->bustype = SSB_BUSTYPE_PCI; |
| bus->host_pci = host_pci; |
| bus->ops = &ssb_pci_ops; |
| |
| err = ssb_bus_register(bus, ssb_pci_get_invariants, 0); |
| if (!err) { |
| ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " |
| "PCI device %s\n", dev_name(&host_pci->dev)); |
| } |
| |
| return err; |
| } |
| EXPORT_SYMBOL(ssb_bus_pcibus_register); |
| #endif /* CONFIG_SSB_PCIHOST */ |
| |
| #ifdef CONFIG_SSB_PCMCIAHOST |
| int ssb_bus_pcmciabus_register(struct ssb_bus *bus, |
| struct pcmcia_device *pcmcia_dev, |
| unsigned long baseaddr) |
| { |
| int err; |
| |
| bus->bustype = SSB_BUSTYPE_PCMCIA; |
| bus->host_pcmcia = pcmcia_dev; |
| bus->ops = &ssb_pcmcia_ops; |
| |
| err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr); |
| if (!err) { |
| ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " |
| "PCMCIA device %s\n", pcmcia_dev->devname); |
| } |
| |
| return err; |
| } |
| EXPORT_SYMBOL(ssb_bus_pcmciabus_register); |
| #endif /* CONFIG_SSB_PCMCIAHOST */ |
| |
| #ifdef CONFIG_SSB_SDIOHOST |
| int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func, |
| unsigned int quirks) |
| { |
| int err; |
| |
| bus->bustype = SSB_BUSTYPE_SDIO; |
| bus->host_sdio = func; |
| bus->ops = &ssb_sdio_ops; |
| bus->quirks = quirks; |
| |
| err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0); |
| if (!err) { |
| ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " |
| "SDIO device %s\n", sdio_func_id(func)); |
| } |
| |
| return err; |
| } |
| EXPORT_SYMBOL(ssb_bus_sdiobus_register); |
| #endif /* CONFIG_SSB_PCMCIAHOST */ |
| |
| int ssb_bus_ssbbus_register(struct ssb_bus *bus, |
| unsigned long baseaddr, |
| ssb_invariants_func_t get_invariants) |
| { |
| int err; |
| |
| bus->bustype = SSB_BUSTYPE_SSB; |
| bus->ops = &ssb_ssb_ops; |
| |
| err = ssb_bus_register(bus, get_invariants, baseaddr); |
| if (!err) { |
| ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at " |
| "address 0x%08lX\n", baseaddr); |
| } |
| |
| return err; |
| } |
| |
| int __ssb_driver_register(struct ssb_driver *drv, struct module *owner) |
| { |
| drv->drv.name = drv->name; |
| drv->drv.bus = &ssb_bustype; |
| drv->drv.owner = owner; |
| |
| return driver_register(&drv->drv); |
| } |
| EXPORT_SYMBOL(__ssb_driver_register); |
| |
| void ssb_driver_unregister(struct ssb_driver *drv) |
| { |
| driver_unregister(&drv->drv); |
| } |
| EXPORT_SYMBOL(ssb_driver_unregister); |
| |
| void ssb_set_devtypedata(struct ssb_device *dev, void *data) |
| { |
| struct ssb_bus *bus = dev->bus; |
| struct ssb_device *ent; |
| int i; |
| |
| for (i = 0; i < bus->nr_devices; i++) { |
| ent = &(bus->devices[i]); |
| if (ent->id.vendor != dev->id.vendor) |
| continue; |
| if (ent->id.coreid != dev->id.coreid) |
| continue; |
| |
| ent->devtypedata = data; |
| } |
| } |
| EXPORT_SYMBOL(ssb_set_devtypedata); |
| |
| static u32 clkfactor_f6_resolve(u32 v) |
| { |
| /* map the magic values */ |
| switch (v) { |
| case SSB_CHIPCO_CLK_F6_2: |
| return 2; |
| case SSB_CHIPCO_CLK_F6_3: |
| return 3; |
| case SSB_CHIPCO_CLK_F6_4: |
| return 4; |
| case SSB_CHIPCO_CLK_F6_5: |
| return 5; |
| case SSB_CHIPCO_CLK_F6_6: |
| return 6; |
| case SSB_CHIPCO_CLK_F6_7: |
| return 7; |
| } |
| return 0; |
| } |
| |
| /* Calculate the speed the backplane would run at a given set of clockcontrol values */ |
| u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m) |
| { |
| u32 n1, n2, clock, m1, m2, m3, mc; |
| |
| n1 = (n & SSB_CHIPCO_CLK_N1); |
| n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT); |
| |
| switch (plltype) { |
| case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ |
| if (m & SSB_CHIPCO_CLK_T6_MMASK) |
| return SSB_CHIPCO_CLK_T6_M0; |
| return SSB_CHIPCO_CLK_T6_M1; |
| case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ |
| case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ |
| case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ |
| case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ |
| n1 = clkfactor_f6_resolve(n1); |
| n2 += SSB_CHIPCO_CLK_F5_BIAS; |
| break; |
| case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */ |
| n1 += SSB_CHIPCO_CLK_T2_BIAS; |
| n2 += SSB_CHIPCO_CLK_T2_BIAS; |
| SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7))); |
| SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23))); |
| break; |
| case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */ |
| return 100000000; |
| default: |
| SSB_WARN_ON(1); |
| } |
| |
| switch (plltype) { |
| case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ |
| case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ |
| clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2; |
| break; |
| default: |
| clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2; |
| } |
| if (!clock) |
| return 0; |
| |
| m1 = (m & SSB_CHIPCO_CLK_M1); |
| m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT); |
| m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT); |
| mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT); |
| |
| switch (plltype) { |
| case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ |
| case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ |
| case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ |
| case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ |
| m1 = clkfactor_f6_resolve(m1); |
| if ((plltype == SSB_PLLTYPE_1) || |
| (plltype == SSB_PLLTYPE_3)) |
| m2 += SSB_CHIPCO_CLK_F5_BIAS; |
| else |
| m2 = clkfactor_f6_resolve(m2); |
| m3 = clkfactor_f6_resolve(m3); |
| |
| switch (mc) { |
| case SSB_CHIPCO_CLK_MC_BYPASS: |
| return clock; |
| case SSB_CHIPCO_CLK_MC_M1: |
| return (clock / m1); |
| case SSB_CHIPCO_CLK_MC_M1M2: |
| return (clock / (m1 * m2)); |
| case SSB_CHIPCO_CLK_MC_M1M2M3: |
| return (clock / (m1 * m2 * m3)); |
| case SSB_CHIPCO_CLK_MC_M1M3: |
| return (clock / (m1 * m3)); |
| } |
| return 0; |
| case SSB_PLLTYPE_2: |
| m1 += SSB_CHIPCO_CLK_T2_BIAS; |
| m2 += SSB_CHIPCO_CLK_T2M2_BIAS; |
| m3 += SSB_CHIPCO_CLK_T2_BIAS; |
| SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7))); |
| SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10))); |
| SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7))); |
| |
| if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP)) |
| clock /= m1; |
| if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP)) |
| clock /= m2; |
| if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP)) |
| clock /= m3; |
| return clock; |
| default: |
| SSB_WARN_ON(1); |
| } |
| return 0; |
| } |
| |
| /* Get the current speed the backplane is running at */ |
| u32 ssb_clockspeed(struct ssb_bus *bus) |
| { |
| u32 rate; |
| u32 plltype; |
| u32 clkctl_n, clkctl_m; |
| |
| if (ssb_extif_available(&bus->extif)) |
| ssb_extif_get_clockcontrol(&bus->extif, &plltype, |
| &clkctl_n, &clkctl_m); |
| else if (bus->chipco.dev) |
| ssb_chipco_get_clockcontrol(&bus->chipco, &plltype, |
| &clkctl_n, &clkctl_m); |
| else |
| return 0; |
| |
| if (bus->chip_id == 0x5365) { |
| rate = 100000000; |
| } else { |
| rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m); |
| if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */ |
| rate /= 2; |
| } |
| |
| return rate; |
| } |
| EXPORT_SYMBOL(ssb_clockspeed); |
| |
| static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev) |
| { |
| u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; |
| |
| /* The REJECT bit changed position in TMSLOW between |
| * Backplane revisions. */ |
| switch (rev) { |
| case SSB_IDLOW_SSBREV_22: |
| return SSB_TMSLOW_REJECT_22; |
| case SSB_IDLOW_SSBREV_23: |
| return SSB_TMSLOW_REJECT_23; |
| case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */ |
| case SSB_IDLOW_SSBREV_25: /* same here */ |
| case SSB_IDLOW_SSBREV_26: /* same here */ |
| case SSB_IDLOW_SSBREV_27: /* same here */ |
| return SSB_TMSLOW_REJECT_23; /* this is a guess */ |
| default: |
| printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev); |
| WARN_ON(1); |
| } |
| return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23); |
| } |
| |
| int ssb_device_is_enabled(struct ssb_device *dev) |
| { |
| u32 val; |
| u32 reject; |
| |
| reject = ssb_tmslow_reject_bitmask(dev); |
| val = ssb_read32(dev, SSB_TMSLOW); |
| val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject; |
| |
| return (val == SSB_TMSLOW_CLOCK); |
| } |
| EXPORT_SYMBOL(ssb_device_is_enabled); |
| |
| static void ssb_flush_tmslow(struct ssb_device *dev) |
| { |
| /* Make _really_ sure the device has finished the TMSLOW |
| * register write transaction, as we risk running into |
| * a machine check exception otherwise. |
| * Do this by reading the register back to commit the |
| * PCI write and delay an additional usec for the device |
| * to react to the change. */ |
| ssb_read32(dev, SSB_TMSLOW); |
| udelay(1); |
| } |
| |
| void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags) |
| { |
| u32 val; |
| |
| ssb_device_disable(dev, core_specific_flags); |
| ssb_write32(dev, SSB_TMSLOW, |
| SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK | |
| SSB_TMSLOW_FGC | core_specific_flags); |
| ssb_flush_tmslow(dev); |
| |
| /* Clear SERR if set. This is a hw bug workaround. */ |
| if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR) |
| ssb_write32(dev, SSB_TMSHIGH, 0); |
| |
| val = ssb_read32(dev, SSB_IMSTATE); |
| if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) { |
| val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO); |
| ssb_write32(dev, SSB_IMSTATE, val); |
| } |
| |
| ssb_write32(dev, SSB_TMSLOW, |
| SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC | |
| core_specific_flags); |
| ssb_flush_tmslow(dev); |
| |
| ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK | |
| core_specific_flags); |
| ssb_flush_tmslow(dev); |
| } |
| EXPORT_SYMBOL(ssb_device_enable); |
| |
| /* Wait for a bit in a register to get set or unset. |
| * timeout is in units of ten-microseconds */ |
| static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask, |
| int timeout, int set) |
| { |
| int i; |
| u32 val; |
| |
| for (i = 0; i < timeout; i++) { |
| val = ssb_read32(dev, reg); |
| if (set) { |
| if (val & bitmask) |
| return 0; |
| } else { |
| if (!(val & bitmask)) |
| return 0; |
| } |
| udelay(10); |
| } |
| printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on " |
| "register %04X to %s.\n", |
| bitmask, reg, (set ? "set" : "clear")); |
| |
| return -ETIMEDOUT; |
| } |
| |
| void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) |
| { |
| u32 reject; |
| |
| if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET) |
| return; |
| |
| reject = ssb_tmslow_reject_bitmask(dev); |
| ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK); |
| ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1); |
| ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0); |
| ssb_write32(dev, SSB_TMSLOW, |
| SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | |
| reject | SSB_TMSLOW_RESET | |
| core_specific_flags); |
| ssb_flush_tmslow(dev); |
| |
| ssb_write32(dev, SSB_TMSLOW, |
| reject | SSB_TMSLOW_RESET | |
| core_specific_flags); |
| ssb_flush_tmslow(dev); |
| } |
| EXPORT_SYMBOL(ssb_device_disable); |
| |
| u32 ssb_dma_translation(struct ssb_device *dev) |
| { |
| switch (dev->bus->bustype) { |
| case SSB_BUSTYPE_SSB: |
| return 0; |
| case SSB_BUSTYPE_PCI: |
| return SSB_PCI_DMA; |
| default: |
| __ssb_dma_not_implemented(dev); |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(ssb_dma_translation); |
| |
| int ssb_dma_set_mask(struct ssb_device *dev, u64 mask) |
| { |
| #ifdef CONFIG_SSB_PCIHOST |
| int err; |
| #endif |
| |
| switch (dev->bus->bustype) { |
| case SSB_BUSTYPE_PCI: |
| #ifdef CONFIG_SSB_PCIHOST |
| err = pci_set_dma_mask(dev->bus->host_pci, mask); |
| if (err) |
| return err; |
| err = pci_set_consistent_dma_mask(dev->bus->host_pci, mask); |
| return err; |
| #endif |
| case SSB_BUSTYPE_SSB: |
| return dma_set_mask(dev->dev, mask); |
| default: |
| __ssb_dma_not_implemented(dev); |
| } |
| return -ENOSYS; |
| } |
| EXPORT_SYMBOL(ssb_dma_set_mask); |
| |
| void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size, |
| dma_addr_t *dma_handle, gfp_t gfp_flags) |
| { |
| switch (dev->bus->bustype) { |
| case SSB_BUSTYPE_PCI: |
| #ifdef CONFIG_SSB_PCIHOST |
| if (gfp_flags & GFP_DMA) { |
| /* Workaround: The PCI API does not support passing |
| * a GFP flag. */ |
| return dma_alloc_coherent(&dev->bus->host_pci->dev, |
| size, dma_handle, gfp_flags); |
| } |
| return pci_alloc_consistent(dev->bus->host_pci, size, dma_handle); |
| #endif |
| case SSB_BUSTYPE_SSB: |
| return dma_alloc_coherent(dev->dev, size, dma_handle, gfp_flags); |
| default: |
| __ssb_dma_not_implemented(dev); |
| } |
| return NULL; |
| } |
| EXPORT_SYMBOL(ssb_dma_alloc_consistent); |
| |
| void ssb_dma_free_consistent(struct ssb_device *dev, size_t size, |
| void *vaddr, dma_addr_t dma_handle, |
| gfp_t gfp_flags) |
| { |
| switch (dev->bus->bustype) { |
| case SSB_BUSTYPE_PCI: |
| #ifdef CONFIG_SSB_PCIHOST |
| if (gfp_flags & GFP_DMA) { |
| /* Workaround: The PCI API does not support passing |
| * a GFP flag. */ |
| dma_free_coherent(&dev->bus->host_pci->dev, |
| size, vaddr, dma_handle); |
| return; |
| } |
| pci_free_consistent(dev->bus->host_pci, size, |
| vaddr, dma_handle); |
| return; |
| #endif |
| case SSB_BUSTYPE_SSB: |
| dma_free_coherent(dev->dev, size, vaddr, dma_handle); |
| return; |
| default: |
| __ssb_dma_not_implemented(dev); |
| } |
| } |
| EXPORT_SYMBOL(ssb_dma_free_consistent); |
| |
| int ssb_bus_may_powerdown(struct ssb_bus *bus) |
| { |
| struct ssb_chipcommon *cc; |
| int err = 0; |
| |
| /* On buses where more than one core may be working |
| * at a time, we must not powerdown stuff if there are |
| * still cores that may want to run. */ |
| if (bus->bustype == SSB_BUSTYPE_SSB) |
| goto out; |
| |
| cc = &bus->chipco; |
| |
| if (!cc->dev) |
| goto out; |
| if (cc->dev->id.revision < 5) |
| goto out; |
| |
| ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW); |
| err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); |
| if (err) |
| goto error; |
| out: |
| #ifdef CONFIG_SSB_DEBUG |
| bus->powered_up = 0; |
| #endif |
| return err; |
| error: |
| ssb_printk(KERN_ERR PFX "Bus powerdown failed\n"); |
| goto out; |
| } |
| EXPORT_SYMBOL(ssb_bus_may_powerdown); |
| |
| int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) |
| { |
| struct ssb_chipcommon *cc; |
| int err; |
| enum ssb_clkmode mode; |
| |
| err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); |
| if (err) |
| goto error; |
| cc = &bus->chipco; |
| mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; |
| ssb_chipco_set_clockmode(cc, mode); |
| |
| #ifdef CONFIG_SSB_DEBUG |
| bus->powered_up = 1; |
| #endif |
| return 0; |
| error: |
| ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); |
| return err; |
| } |
| EXPORT_SYMBOL(ssb_bus_powerup); |
| |
| u32 ssb_admatch_base(u32 adm) |
| { |
| u32 base = 0; |
| |
| switch (adm & SSB_ADM_TYPE) { |
| case SSB_ADM_TYPE0: |
| base = (adm & SSB_ADM_BASE0); |
| break; |
| case SSB_ADM_TYPE1: |
| SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ |
| base = (adm & SSB_ADM_BASE1); |
| break; |
| case SSB_ADM_TYPE2: |
| SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ |
| base = (adm & SSB_ADM_BASE2); |
| break; |
| default: |
| SSB_WARN_ON(1); |
| } |
| |
| return base; |
| } |
| EXPORT_SYMBOL(ssb_admatch_base); |
| |
| u32 ssb_admatch_size(u32 adm) |
| { |
| u32 size = 0; |
| |
| switch (adm & SSB_ADM_TYPE) { |
| case SSB_ADM_TYPE0: |
| size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT); |
| break; |
| case SSB_ADM_TYPE1: |
| SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ |
| size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT); |
| break; |
| case SSB_ADM_TYPE2: |
| SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ |
| size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT); |
| break; |
| default: |
| SSB_WARN_ON(1); |
| } |
| size = (1 << (size + 1)); |
| |
| return size; |
| } |
| EXPORT_SYMBOL(ssb_admatch_size); |
| |
| static int __init ssb_modinit(void) |
| { |
| int err; |
| |
| /* See the comment at the ssb_is_early_boot definition */ |
| ssb_is_early_boot = 0; |
| err = bus_register(&ssb_bustype); |
| if (err) |
| return err; |
| |
| /* Maybe we already registered some buses at early boot. |
| * Check for this and attach them |
| */ |
| ssb_buses_lock(); |
| err = ssb_attach_queued_buses(); |
| ssb_buses_unlock(); |
| if (err) { |
| bus_unregister(&ssb_bustype); |
| goto out; |
| } |
| |
| err = b43_pci_ssb_bridge_init(); |
| if (err) { |
| ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge " |
| "initialization failed\n"); |
| /* don't fail SSB init because of this */ |
| err = 0; |
| } |
| err = ssb_gige_init(); |
| if (err) { |
| ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet " |
| "driver initialization failed\n"); |
| /* don't fail SSB init because of this */ |
| err = 0; |
| } |
| out: |
| return err; |
| } |
| /* ssb must be initialized after PCI but before the ssb drivers. |
| * That means we must use some initcall between subsys_initcall |
| * and device_initcall. */ |
| fs_initcall(ssb_modinit); |
| |
| static void __exit ssb_modexit(void) |
| { |
| ssb_gige_exit(); |
| b43_pci_ssb_bridge_exit(); |
| bus_unregister(&ssb_bustype); |
| } |
| module_exit(ssb_modexit) |