| /* |
| * drivers/mtd/nand/edb7312.c |
| * |
| * Copyright (C) 2002 Marius Gröger (mag@sysgo.de) |
| * |
| * Derived from drivers/mtd/nand/autcpu12.c |
| * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Overview: |
| * This is a device driver for the NAND flash device found on the |
| * CLEP7312 board which utilizes the Toshiba TC58V64AFT part. This is |
| * a 64Mibit (8MiB x 8 bits) NAND flash device. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/mtd/partitions.h> |
| #include <asm/io.h> |
| #include <mach/hardware.h> /* for CLPS7111_VIRT_BASE */ |
| #include <asm/sizes.h> |
| #include <asm/hardware/clps7111.h> |
| |
| /* |
| * MTD structure for EDB7312 board |
| */ |
| static struct mtd_info *ep7312_mtd = NULL; |
| |
| /* |
| * Values specific to the EDB7312 board (used with EP7312 processor) |
| */ |
| #define EP7312_FIO_PBASE 0x10000000 /* Phys address of flash */ |
| #define EP7312_PXDR 0x0001 /* |
| * IO offset to Port B data register |
| * where the CLE, ALE and NCE pins |
| * are wired to. |
| */ |
| #define EP7312_PXDDR 0x0041 /* |
| * IO offset to Port B data direction |
| * register so we can control the IO |
| * lines. |
| */ |
| |
| /* |
| * Module stuff |
| */ |
| |
| static unsigned long ep7312_fio_pbase = EP7312_FIO_PBASE; |
| static void __iomem *ep7312_pxdr = (void __iomem *)EP7312_PXDR; |
| static void __iomem *ep7312_pxddr = (void __iomem *)EP7312_PXDDR; |
| |
| #ifdef CONFIG_MTD_PARTITIONS |
| /* |
| * Define static partitions for flash device |
| */ |
| static struct mtd_partition partition_info[] = { |
| {.name = "EP7312 Nand Flash", |
| .offset = 0, |
| .size = 8 * 1024 * 1024} |
| }; |
| |
| #define NUM_PARTITIONS 1 |
| |
| #endif |
| |
| /* |
| * hardware specific access to control-lines |
| * |
| * NAND_NCE: bit 0 -> bit 6 (bit 7 = 1) |
| * NAND_CLE: bit 1 -> bit 4 |
| * NAND_ALE: bit 2 -> bit 5 |
| */ |
| static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) |
| { |
| struct nand_chip *chip = mtd->priv; |
| |
| if (ctrl & NAND_CTRL_CHANGE) { |
| unsigned char bits = 0x80; |
| |
| bits |= (ctrl & (NAND_CLE | NAND_ALE)) << 3; |
| bits |= (ctrl & NAND_NCE) ? 0x00 : 0x40; |
| |
| clps_writeb((clps_readb(ep7312_pxdr) & 0xF0) | bits, |
| ep7312_pxdr); |
| } |
| if (cmd != NAND_CMD_NONE) |
| writeb(cmd, chip->IO_ADDR_W); |
| } |
| |
| /* |
| * read device ready pin |
| */ |
| static int ep7312_device_ready(struct mtd_info *mtd) |
| { |
| return 1; |
| } |
| |
| #ifdef CONFIG_MTD_PARTITIONS |
| const char *part_probes[] = { "cmdlinepart", NULL }; |
| #endif |
| |
| /* |
| * Main initialization routine |
| */ |
| static int __init ep7312_init(void) |
| { |
| struct nand_chip *this; |
| const char *part_type = 0; |
| int mtd_parts_nb = 0; |
| struct mtd_partition *mtd_parts = 0; |
| void __iomem *ep7312_fio_base; |
| |
| /* Allocate memory for MTD device structure and private data */ |
| ep7312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); |
| if (!ep7312_mtd) { |
| printk("Unable to allocate EDB7312 NAND MTD device structure.\n"); |
| return -ENOMEM; |
| } |
| |
| /* map physical address */ |
| ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K); |
| if (!ep7312_fio_base) { |
| printk("ioremap EDB7312 NAND flash failed\n"); |
| kfree(ep7312_mtd); |
| return -EIO; |
| } |
| |
| /* Get pointer to private data */ |
| this = (struct nand_chip *)(&ep7312_mtd[1]); |
| |
| /* Initialize structures */ |
| memset(ep7312_mtd, 0, sizeof(struct mtd_info)); |
| memset(this, 0, sizeof(struct nand_chip)); |
| |
| /* Link the private data with the MTD structure */ |
| ep7312_mtd->priv = this; |
| ep7312_mtd->owner = THIS_MODULE; |
| |
| /* |
| * Set GPIO Port B control register so that the pins are configured |
| * to be outputs for controlling the NAND flash. |
| */ |
| clps_writeb(0xf0, ep7312_pxddr); |
| |
| /* insert callbacks */ |
| this->IO_ADDR_R = ep7312_fio_base; |
| this->IO_ADDR_W = ep7312_fio_base; |
| this->cmd_ctrl = ep7312_hwcontrol; |
| this->dev_ready = ep7312_device_ready; |
| /* 15 us command delay time */ |
| this->chip_delay = 15; |
| |
| /* Scan to find existence of the device */ |
| if (nand_scan(ep7312_mtd, 1)) { |
| iounmap((void *)ep7312_fio_base); |
| kfree(ep7312_mtd); |
| return -ENXIO; |
| } |
| #ifdef CONFIG_MTD_PARTITIONS |
| ep7312_mtd->name = "edb7312-nand"; |
| mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes, &mtd_parts, 0); |
| if (mtd_parts_nb > 0) |
| part_type = "command line"; |
| else |
| mtd_parts_nb = 0; |
| #endif |
| if (mtd_parts_nb == 0) { |
| mtd_parts = partition_info; |
| mtd_parts_nb = NUM_PARTITIONS; |
| part_type = "static"; |
| } |
| |
| /* Register the partitions */ |
| printk(KERN_NOTICE "Using %s partition definition\n", part_type); |
| add_mtd_partitions(ep7312_mtd, mtd_parts, mtd_parts_nb); |
| |
| /* Return happy */ |
| return 0; |
| } |
| |
| module_init(ep7312_init); |
| |
| /* |
| * Clean up routine |
| */ |
| static void __exit ep7312_cleanup(void) |
| { |
| struct nand_chip *this = (struct nand_chip *)&ep7312_mtd[1]; |
| |
| /* Release resources, unregister device */ |
| nand_release(ap7312_mtd); |
| |
| /* Release io resource */ |
| iounmap(this->IO_ADDR_R); |
| |
| /* Free the MTD device structure */ |
| kfree(ep7312_mtd); |
| } |
| |
| module_exit(ep7312_cleanup); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>"); |
| MODULE_DESCRIPTION("MTD map driver for Cogent EDB7312 board"); |