| /* |
| * Copyright 2008-2009 Analog Devices Inc. |
| * |
| * Licensed under the GPL-2 or later |
| */ |
| |
| #ifndef _MACH_BLACKFIN_H_ |
| #define _MACH_BLACKFIN_H_ |
| |
| #include "bf518.h" |
| #include "defBF512.h" |
| #include "anomaly.h" |
| |
| #if defined(CONFIG_BF518) |
| #include "defBF518.h" |
| #endif |
| |
| #if defined(CONFIG_BF516) |
| #include "defBF516.h" |
| #endif |
| |
| #if defined(CONFIG_BF514) |
| #include "defBF514.h" |
| #endif |
| |
| #if defined(CONFIG_BF512) |
| #include "defBF512.h" |
| #endif |
| |
| #if !defined(__ASSEMBLY__) |
| #include "cdefBF512.h" |
| |
| #if defined(CONFIG_BF518) |
| #include "cdefBF518.h" |
| #endif |
| |
| #if defined(CONFIG_BF516) |
| #include "cdefBF516.h" |
| #endif |
| |
| #if defined(CONFIG_BF514) |
| #include "cdefBF514.h" |
| #endif |
| #endif |
| |
| #define BFIN_UART_NR_PORTS 2 |
| |
| #define OFFSET_THR 0x00 /* Transmit Holding register */ |
| #define OFFSET_RBR 0x00 /* Receive Buffer register */ |
| #define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ |
| #define OFFSET_IER 0x04 /* Interrupt Enable Register */ |
| #define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ |
| #define OFFSET_IIR 0x08 /* Interrupt Identification Register */ |
| #define OFFSET_LCR 0x0C /* Line Control Register */ |
| #define OFFSET_MCR 0x10 /* Modem Control Register */ |
| #define OFFSET_LSR 0x14 /* Line Status Register */ |
| #define OFFSET_MSR 0x18 /* Modem Status Register */ |
| #define OFFSET_SCR 0x1C /* SCR Scratch Register */ |
| #define OFFSET_GCTL 0x24 /* Global Control Register */ |
| |
| /* PLL_DIV Masks */ |
| #define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ |
| #define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ |
| #define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ |
| #define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ |
| |
| #endif |