| /* |
| * s2255drv.c - a driver for the Sensoray 2255 USB video capture device |
| * |
| * Copyright (C) 2007-2008 by Sensoray Company Inc. |
| * Dean Anderson |
| * |
| * Some video buffer code based on vivi driver: |
| * |
| * Sensoray 2255 device supports 4 simultaneous channels. |
| * The channels are not "crossbar" inputs, they are physically |
| * attached to separate video decoders. |
| * |
| * Because of USB2.0 bandwidth limitations. There is only a |
| * certain amount of data which may be transferred at one time. |
| * |
| * Example maximum bandwidth utilization: |
| * |
| * -full size, color mode YUYV or YUV422P: 2 channels at once |
| * |
| * -full or half size Grey scale: all 4 channels at once |
| * |
| * -half size, color mode YUYV or YUV422P: all 4 channels at once |
| * |
| * -full size, color mode YUYV or YUV422P 1/2 frame rate: all 4 channels |
| * at once. |
| * (TODO: Incorporate videodev2 frame rate(FR) enumeration, |
| * which is currently experimental.) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/firmware.h> |
| #include <linux/kernel.h> |
| #include <linux/mutex.h> |
| #include <linux/videodev2.h> |
| #include <linux/version.h> |
| #include <linux/mm.h> |
| #include <linux/smp_lock.h> |
| #include <media/videobuf-vmalloc.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-ioctl.h> |
| #include <linux/vmalloc.h> |
| #include <linux/usb.h> |
| |
| #define FIRMWARE_FILE_NAME "f2255usb.bin" |
| |
| |
| |
| /* default JPEG quality */ |
| #define S2255_DEF_JPEG_QUAL 50 |
| /* vendor request in */ |
| #define S2255_VR_IN 0 |
| /* vendor request out */ |
| #define S2255_VR_OUT 1 |
| /* firmware query */ |
| #define S2255_VR_FW 0x30 |
| /* USB endpoint number for configuring the device */ |
| #define S2255_CONFIG_EP 2 |
| /* maximum time for DSP to start responding after last FW word loaded(ms) */ |
| #define S2255_DSP_BOOTTIME 800 |
| /* maximum time to wait for firmware to load (ms) */ |
| #define S2255_LOAD_TIMEOUT (5000 + S2255_DSP_BOOTTIME) |
| #define S2255_DEF_BUFS 16 |
| #define S2255_SETMODE_TIMEOUT 500 |
| #define MAX_CHANNELS 4 |
| #define S2255_MARKER_FRAME 0x2255DA4AL |
| #define S2255_MARKER_RESPONSE 0x2255ACACL |
| #define S2255_RESPONSE_SETMODE 0x01 |
| #define S2255_RESPONSE_FW 0x10 |
| #define S2255_USB_XFER_SIZE (16 * 1024) |
| #define MAX_CHANNELS 4 |
| #define MAX_PIPE_BUFFERS 1 |
| #define SYS_FRAMES 4 |
| /* maximum size is PAL full size plus room for the marker header(s) */ |
| #define SYS_FRAMES_MAXSIZE (720*288*2*2 + 4096) |
| #define DEF_USB_BLOCK S2255_USB_XFER_SIZE |
| #define LINE_SZ_4CIFS_NTSC 640 |
| #define LINE_SZ_2CIFS_NTSC 640 |
| #define LINE_SZ_1CIFS_NTSC 320 |
| #define LINE_SZ_4CIFS_PAL 704 |
| #define LINE_SZ_2CIFS_PAL 704 |
| #define LINE_SZ_1CIFS_PAL 352 |
| #define NUM_LINES_4CIFS_NTSC 240 |
| #define NUM_LINES_2CIFS_NTSC 240 |
| #define NUM_LINES_1CIFS_NTSC 240 |
| #define NUM_LINES_4CIFS_PAL 288 |
| #define NUM_LINES_2CIFS_PAL 288 |
| #define NUM_LINES_1CIFS_PAL 288 |
| #define LINE_SZ_DEF 640 |
| #define NUM_LINES_DEF 240 |
| |
| |
| /* predefined settings */ |
| #define FORMAT_NTSC 1 |
| #define FORMAT_PAL 2 |
| |
| #define SCALE_4CIFS 1 /* 640x480(NTSC) or 704x576(PAL) */ |
| #define SCALE_2CIFS 2 /* 640x240(NTSC) or 704x288(PAL) */ |
| #define SCALE_1CIFS 3 /* 320x240(NTSC) or 352x288(PAL) */ |
| /* SCALE_4CIFSI is the 2 fields interpolated into one */ |
| #define SCALE_4CIFSI 4 /* 640x480(NTSC) or 704x576(PAL) high quality */ |
| |
| #define COLOR_YUVPL 1 /* YUV planar */ |
| #define COLOR_YUVPK 2 /* YUV packed */ |
| #define COLOR_Y8 4 /* monochrome */ |
| #define COLOR_JPG 5 /* JPEG */ |
| #define MASK_COLOR 0xff |
| #define MASK_JPG_QUALITY 0xff00 |
| |
| /* frame decimation. Not implemented by V4L yet(experimental in V4L) */ |
| #define FDEC_1 1 /* capture every frame. default */ |
| #define FDEC_2 2 /* capture every 2nd frame */ |
| #define FDEC_3 3 /* capture every 3rd frame */ |
| #define FDEC_5 5 /* capture every 5th frame */ |
| |
| /*------------------------------------------------------- |
| * Default mode parameters. |
| *-------------------------------------------------------*/ |
| #define DEF_SCALE SCALE_4CIFS |
| #define DEF_COLOR COLOR_YUVPL |
| #define DEF_FDEC FDEC_1 |
| #define DEF_BRIGHT 0 |
| #define DEF_CONTRAST 0x5c |
| #define DEF_SATURATION 0x80 |
| #define DEF_HUE 0 |
| |
| /* usb config commands */ |
| #define IN_DATA_TOKEN 0x2255c0de |
| #define CMD_2255 0xc2255000 |
| #define CMD_SET_MODE (CMD_2255 | 0x10) |
| #define CMD_START (CMD_2255 | 0x20) |
| #define CMD_STOP (CMD_2255 | 0x30) |
| #define CMD_STATUS (CMD_2255 | 0x40) |
| |
| struct s2255_mode { |
| u32 format; /* input video format (NTSC, PAL) */ |
| u32 scale; /* output video scale */ |
| u32 color; /* output video color format */ |
| u32 fdec; /* frame decimation */ |
| u32 bright; /* brightness */ |
| u32 contrast; /* contrast */ |
| u32 saturation; /* saturation */ |
| u32 hue; /* hue (NTSC only)*/ |
| u32 single; /* capture 1 frame at a time (!=0), continuously (==0)*/ |
| u32 usb_block; /* block size. should be 4096 of DEF_USB_BLOCK */ |
| u32 restart; /* if DSP requires restart */ |
| }; |
| |
| |
| #define S2255_READ_IDLE 0 |
| #define S2255_READ_FRAME 1 |
| |
| /* frame structure */ |
| struct s2255_framei { |
| unsigned long size; |
| unsigned long ulState; /* ulState:S2255_READ_IDLE, S2255_READ_FRAME*/ |
| void *lpvbits; /* image data */ |
| unsigned long cur_size; /* current data copied to it */ |
| }; |
| |
| /* image buffer structure */ |
| struct s2255_bufferi { |
| unsigned long dwFrames; /* number of frames in buffer */ |
| struct s2255_framei frame[SYS_FRAMES]; /* array of FRAME structures */ |
| }; |
| |
| #define DEF_MODEI_NTSC_CONT {FORMAT_NTSC, DEF_SCALE, DEF_COLOR, \ |
| DEF_FDEC, DEF_BRIGHT, DEF_CONTRAST, DEF_SATURATION, \ |
| DEF_HUE, 0, DEF_USB_BLOCK, 0} |
| |
| struct s2255_dmaqueue { |
| struct list_head active; |
| struct s2255_dev *dev; |
| int channel; |
| }; |
| |
| /* for firmware loading, fw_state */ |
| #define S2255_FW_NOTLOADED 0 |
| #define S2255_FW_LOADED_DSPWAIT 1 |
| #define S2255_FW_SUCCESS 2 |
| #define S2255_FW_FAILED 3 |
| #define S2255_FW_DISCONNECTING 4 |
| |
| #define S2255_FW_MARKER cpu_to_le32(0x22552f2f) |
| /* 2255 read states */ |
| #define S2255_READ_IDLE 0 |
| #define S2255_READ_FRAME 1 |
| struct s2255_fw { |
| int fw_loaded; |
| int fw_size; |
| struct urb *fw_urb; |
| atomic_t fw_state; |
| void *pfw_data; |
| wait_queue_head_t wait_fw; |
| const struct firmware *fw; |
| }; |
| |
| struct s2255_pipeinfo { |
| u32 max_transfer_size; |
| u32 cur_transfer_size; |
| u8 *transfer_buffer; |
| u32 state; |
| void *stream_urb; |
| void *dev; /* back pointer to s2255_dev struct*/ |
| u32 err_count; |
| u32 idx; |
| }; |
| |
| struct s2255_fmt; /*forward declaration */ |
| |
| struct s2255_dev { |
| int frames; |
| int users[MAX_CHANNELS]; |
| struct mutex lock; |
| struct mutex open_lock; |
| int resources[MAX_CHANNELS]; |
| struct usb_device *udev; |
| struct usb_interface *interface; |
| u8 read_endpoint; |
| |
| struct s2255_dmaqueue vidq[MAX_CHANNELS]; |
| struct video_device *vdev[MAX_CHANNELS]; |
| struct list_head s2255_devlist; |
| struct timer_list timer; |
| struct s2255_fw *fw_data; |
| struct s2255_pipeinfo pipes[MAX_PIPE_BUFFERS]; |
| struct s2255_bufferi buffer[MAX_CHANNELS]; |
| struct s2255_mode mode[MAX_CHANNELS]; |
| /* jpeg compression */ |
| struct v4l2_jpegcompression jc[MAX_CHANNELS]; |
| /* capture parameters (for high quality mode full size) */ |
| struct v4l2_captureparm cap_parm[MAX_CHANNELS]; |
| const struct s2255_fmt *cur_fmt[MAX_CHANNELS]; |
| int cur_frame[MAX_CHANNELS]; |
| int last_frame[MAX_CHANNELS]; |
| u32 cc; /* current channel */ |
| int b_acquire[MAX_CHANNELS]; |
| /* allocated image size */ |
| unsigned long req_image_size[MAX_CHANNELS]; |
| /* received packet size */ |
| unsigned long pkt_size[MAX_CHANNELS]; |
| int bad_payload[MAX_CHANNELS]; |
| unsigned long frame_count[MAX_CHANNELS]; |
| int frame_ready; |
| /* if JPEG image */ |
| int jpg_size[MAX_CHANNELS]; |
| /* if channel configured to default state */ |
| int chn_configured[MAX_CHANNELS]; |
| wait_queue_head_t wait_setmode[MAX_CHANNELS]; |
| int setmode_ready[MAX_CHANNELS]; |
| int chn_ready; |
| struct kref kref; |
| spinlock_t slock; |
| }; |
| #define to_s2255_dev(d) container_of(d, struct s2255_dev, kref) |
| |
| struct s2255_fmt { |
| char *name; |
| u32 fourcc; |
| int depth; |
| }; |
| |
| /* buffer for one video frame */ |
| struct s2255_buffer { |
| /* common v4l buffer stuff -- must be first */ |
| struct videobuf_buffer vb; |
| const struct s2255_fmt *fmt; |
| }; |
| |
| struct s2255_fh { |
| struct s2255_dev *dev; |
| const struct s2255_fmt *fmt; |
| unsigned int width; |
| unsigned int height; |
| struct videobuf_queue vb_vidq; |
| enum v4l2_buf_type type; |
| int channel; |
| /* mode below is the desired mode. |
| mode in s2255_dev is the current mode that was last set */ |
| struct s2255_mode mode; |
| int resources[MAX_CHANNELS]; |
| }; |
| |
| /* current cypress EEPROM firmware version */ |
| #define S2255_CUR_USB_FWVER ((3 << 8) | 6) |
| #define S2255_MAJOR_VERSION 1 |
| #define S2255_MINOR_VERSION 14 |
| #define S2255_RELEASE 0 |
| #define S2255_VERSION KERNEL_VERSION(S2255_MAJOR_VERSION, \ |
| S2255_MINOR_VERSION, \ |
| S2255_RELEASE) |
| |
| /* vendor ids */ |
| #define USB_S2255_VENDOR_ID 0x1943 |
| #define USB_S2255_PRODUCT_ID 0x2255 |
| #define S2255_NORMS (V4L2_STD_PAL | V4L2_STD_NTSC) |
| /* frame prefix size (sent once every frame) */ |
| #define PREFIX_SIZE 512 |
| |
| /* Channels on box are in reverse order */ |
| static unsigned long G_chnmap[MAX_CHANNELS] = {3, 2, 1, 0}; |
| |
| static LIST_HEAD(s2255_devlist); |
| |
| static int debug; |
| static int *s2255_debug = &debug; |
| |
| static int s2255_start_readpipe(struct s2255_dev *dev); |
| static void s2255_stop_readpipe(struct s2255_dev *dev); |
| static int s2255_start_acquire(struct s2255_dev *dev, unsigned long chn); |
| static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn); |
| static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, |
| int chn, int jpgsize); |
| static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, |
| struct s2255_mode *mode); |
| static int s2255_board_shutdown(struct s2255_dev *dev); |
| static void s2255_exit_v4l(struct s2255_dev *dev); |
| static void s2255_fwload_start(struct s2255_dev *dev, int reset); |
| static void s2255_destroy(struct kref *kref); |
| static long s2255_vendor_req(struct s2255_dev *dev, unsigned char req, |
| u16 index, u16 value, void *buf, |
| s32 buf_len, int bOut); |
| |
| /* dev_err macro with driver name */ |
| #define S2255_DRIVER_NAME "s2255" |
| #define s2255_dev_err(dev, fmt, arg...) \ |
| dev_err(dev, S2255_DRIVER_NAME " - " fmt, ##arg) |
| |
| #define dprintk(level, fmt, arg...) \ |
| do { \ |
| if (*s2255_debug >= (level)) { \ |
| printk(KERN_DEBUG S2255_DRIVER_NAME \ |
| ": " fmt, ##arg); \ |
| } \ |
| } while (0) |
| |
| static struct usb_driver s2255_driver; |
| |
| |
| /* Declare static vars that will be used as parameters */ |
| static unsigned int vid_limit = 16; /* Video memory limit, in Mb */ |
| |
| /* start video number */ |
| static int video_nr = -1; /* /dev/videoN, -1 for autodetect */ |
| |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Debug level(0-100) default 0"); |
| module_param(vid_limit, int, 0644); |
| MODULE_PARM_DESC(vid_limit, "video memory limit(Mb)"); |
| module_param(video_nr, int, 0644); |
| MODULE_PARM_DESC(video_nr, "start video minor(-1 default autodetect)"); |
| |
| /* USB device table */ |
| static struct usb_device_id s2255_table[] = { |
| {USB_DEVICE(USB_S2255_VENDOR_ID, USB_S2255_PRODUCT_ID)}, |
| { } /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(usb, s2255_table); |
| |
| |
| #define BUFFER_TIMEOUT msecs_to_jiffies(400) |
| |
| /* supported controls */ |
| static struct v4l2_queryctrl s2255_qctrl[] = { |
| { |
| .id = V4L2_CID_BRIGHTNESS, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Brightness", |
| .minimum = -127, |
| .maximum = 128, |
| .step = 1, |
| .default_value = 0, |
| .flags = 0, |
| }, { |
| .id = V4L2_CID_CONTRAST, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Contrast", |
| .minimum = 0, |
| .maximum = 255, |
| .step = 0x1, |
| .default_value = DEF_CONTRAST, |
| .flags = 0, |
| }, { |
| .id = V4L2_CID_SATURATION, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Saturation", |
| .minimum = 0, |
| .maximum = 255, |
| .step = 0x1, |
| .default_value = DEF_SATURATION, |
| .flags = 0, |
| }, { |
| .id = V4L2_CID_HUE, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Hue", |
| .minimum = 0, |
| .maximum = 255, |
| .step = 0x1, |
| .default_value = DEF_HUE, |
| .flags = 0, |
| } |
| }; |
| |
| static int qctl_regs[ARRAY_SIZE(s2255_qctrl)]; |
| |
| /* image formats. */ |
| static const struct s2255_fmt formats[] = { |
| { |
| .name = "4:2:2, planar, YUV422P", |
| .fourcc = V4L2_PIX_FMT_YUV422P, |
| .depth = 16 |
| |
| }, { |
| .name = "4:2:2, packed, YUYV", |
| .fourcc = V4L2_PIX_FMT_YUYV, |
| .depth = 16 |
| |
| }, { |
| .name = "4:2:2, packed, UYVY", |
| .fourcc = V4L2_PIX_FMT_UYVY, |
| .depth = 16 |
| }, { |
| .name = "JPG", |
| .fourcc = V4L2_PIX_FMT_JPEG, |
| .depth = 24 |
| }, { |
| .name = "8bpp GREY", |
| .fourcc = V4L2_PIX_FMT_GREY, |
| .depth = 8 |
| } |
| }; |
| |
| static int norm_maxw(struct video_device *vdev) |
| { |
| return (vdev->current_norm & V4L2_STD_NTSC) ? |
| LINE_SZ_4CIFS_NTSC : LINE_SZ_4CIFS_PAL; |
| } |
| |
| static int norm_maxh(struct video_device *vdev) |
| { |
| return (vdev->current_norm & V4L2_STD_NTSC) ? |
| (NUM_LINES_1CIFS_NTSC * 2) : (NUM_LINES_1CIFS_PAL * 2); |
| } |
| |
| static int norm_minw(struct video_device *vdev) |
| { |
| return (vdev->current_norm & V4L2_STD_NTSC) ? |
| LINE_SZ_1CIFS_NTSC : LINE_SZ_1CIFS_PAL; |
| } |
| |
| static int norm_minh(struct video_device *vdev) |
| { |
| return (vdev->current_norm & V4L2_STD_NTSC) ? |
| (NUM_LINES_1CIFS_NTSC) : (NUM_LINES_1CIFS_PAL); |
| } |
| |
| |
| /* |
| * TODO: fixme: move YUV reordering to hardware |
| * converts 2255 planar format to yuyv or uyvy |
| */ |
| static void planar422p_to_yuv_packed(const unsigned char *in, |
| unsigned char *out, |
| int width, int height, |
| int fmt) |
| { |
| unsigned char *pY; |
| unsigned char *pCb; |
| unsigned char *pCr; |
| unsigned long size = height * width; |
| unsigned int i; |
| pY = (unsigned char *)in; |
| pCr = (unsigned char *)in + height * width; |
| pCb = (unsigned char *)in + height * width + (height * width / 2); |
| for (i = 0; i < size * 2; i += 4) { |
| out[i] = (fmt == V4L2_PIX_FMT_YUYV) ? *pY++ : *pCr++; |
| out[i + 1] = (fmt == V4L2_PIX_FMT_YUYV) ? *pCr++ : *pY++; |
| out[i + 2] = (fmt == V4L2_PIX_FMT_YUYV) ? *pY++ : *pCb++; |
| out[i + 3] = (fmt == V4L2_PIX_FMT_YUYV) ? *pCb++ : *pY++; |
| } |
| return; |
| } |
| |
| static void s2255_reset_dsppower(struct s2255_dev *dev) |
| { |
| s2255_vendor_req(dev, 0x40, 0x0b0b, 0x0b0b, NULL, 0, 1); |
| msleep(10); |
| s2255_vendor_req(dev, 0x50, 0x0000, 0x0000, NULL, 0, 1); |
| return; |
| } |
| |
| /* kickstarts the firmware loading. from probe |
| */ |
| static void s2255_timer(unsigned long user_data) |
| { |
| struct s2255_fw *data = (struct s2255_fw *)user_data; |
| dprintk(100, "s2255 timer\n"); |
| if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) { |
| printk(KERN_ERR "s2255: can't submit urb\n"); |
| atomic_set(&data->fw_state, S2255_FW_FAILED); |
| /* wake up anything waiting for the firmware */ |
| wake_up(&data->wait_fw); |
| return; |
| } |
| } |
| |
| |
| /* this loads the firmware asynchronously. |
| Originally this was done synchroously in probe. |
| But it is better to load it asynchronously here than block |
| inside the probe function. Blocking inside probe affects boot time. |
| FW loading is triggered by the timer in the probe function |
| */ |
| static void s2255_fwchunk_complete(struct urb *urb) |
| { |
| struct s2255_fw *data = urb->context; |
| struct usb_device *udev = urb->dev; |
| int len; |
| dprintk(100, "udev %p urb %p", udev, urb); |
| if (urb->status) { |
| dev_err(&udev->dev, "URB failed with status %d\n", urb->status); |
| atomic_set(&data->fw_state, S2255_FW_FAILED); |
| /* wake up anything waiting for the firmware */ |
| wake_up(&data->wait_fw); |
| return; |
| } |
| if (data->fw_urb == NULL) { |
| s2255_dev_err(&udev->dev, "disconnected\n"); |
| atomic_set(&data->fw_state, S2255_FW_FAILED); |
| /* wake up anything waiting for the firmware */ |
| wake_up(&data->wait_fw); |
| return; |
| } |
| #define CHUNK_SIZE 512 |
| /* all USB transfers must be done with continuous kernel memory. |
| can't allocate more than 128k in current linux kernel, so |
| upload the firmware in chunks |
| */ |
| if (data->fw_loaded < data->fw_size) { |
| len = (data->fw_loaded + CHUNK_SIZE) > data->fw_size ? |
| data->fw_size % CHUNK_SIZE : CHUNK_SIZE; |
| |
| if (len < CHUNK_SIZE) |
| memset(data->pfw_data, 0, CHUNK_SIZE); |
| |
| dprintk(100, "completed len %d, loaded %d \n", len, |
| data->fw_loaded); |
| |
| memcpy(data->pfw_data, |
| (char *) data->fw->data + data->fw_loaded, len); |
| |
| usb_fill_bulk_urb(data->fw_urb, udev, usb_sndbulkpipe(udev, 2), |
| data->pfw_data, CHUNK_SIZE, |
| s2255_fwchunk_complete, data); |
| if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) { |
| dev_err(&udev->dev, "failed submit URB\n"); |
| atomic_set(&data->fw_state, S2255_FW_FAILED); |
| /* wake up anything waiting for the firmware */ |
| wake_up(&data->wait_fw); |
| return; |
| } |
| data->fw_loaded += len; |
| } else { |
| atomic_set(&data->fw_state, S2255_FW_LOADED_DSPWAIT); |
| } |
| dprintk(100, "2255 complete done\n"); |
| return; |
| |
| } |
| |
| static int s2255_got_frame(struct s2255_dev *dev, int chn, int jpgsize) |
| { |
| struct s2255_dmaqueue *dma_q = &dev->vidq[chn]; |
| struct s2255_buffer *buf; |
| unsigned long flags = 0; |
| int rc = 0; |
| dprintk(2, "wakeup: %p channel: %d\n", &dma_q, chn); |
| spin_lock_irqsave(&dev->slock, flags); |
| |
| if (list_empty(&dma_q->active)) { |
| dprintk(1, "No active queue to serve\n"); |
| rc = -1; |
| goto unlock; |
| } |
| buf = list_entry(dma_q->active.next, |
| struct s2255_buffer, vb.queue); |
| |
| list_del(&buf->vb.queue); |
| do_gettimeofday(&buf->vb.ts); |
| dprintk(100, "[%p/%d] wakeup\n", buf, buf->vb.i); |
| s2255_fillbuff(dev, buf, dma_q->channel, jpgsize); |
| wake_up(&buf->vb.done); |
| dprintk(2, "wakeup [buf/i] [%p/%d]\n", buf, buf->vb.i); |
| unlock: |
| spin_unlock_irqrestore(&dev->slock, flags); |
| return 0; |
| } |
| |
| |
| static const struct s2255_fmt *format_by_fourcc(int fourcc) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(formats); i++) { |
| if (-1 == formats[i].fourcc) |
| continue; |
| if (formats[i].fourcc == fourcc) |
| return formats + i; |
| } |
| return NULL; |
| } |
| |
| |
| |
| |
| /* video buffer vmalloc implementation based partly on VIVI driver which is |
| * Copyright (c) 2006 by |
| * Mauro Carvalho Chehab <mchehab--a.t--infradead.org> |
| * Ted Walther <ted--a.t--enumera.com> |
| * John Sokol <sokol--a.t--videotechnology.com> |
| * http://v4l.videotechnology.com/ |
| * |
| */ |
| static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, |
| int chn, int jpgsize) |
| { |
| int pos = 0; |
| struct timeval ts; |
| const char *tmpbuf; |
| char *vbuf = videobuf_to_vmalloc(&buf->vb); |
| unsigned long last_frame; |
| struct s2255_framei *frm; |
| |
| if (!vbuf) |
| return; |
| |
| last_frame = dev->last_frame[chn]; |
| if (last_frame != -1) { |
| frm = &dev->buffer[chn].frame[last_frame]; |
| tmpbuf = |
| (const char *)dev->buffer[chn].frame[last_frame].lpvbits; |
| switch (buf->fmt->fourcc) { |
| case V4L2_PIX_FMT_YUYV: |
| case V4L2_PIX_FMT_UYVY: |
| planar422p_to_yuv_packed((const unsigned char *)tmpbuf, |
| vbuf, buf->vb.width, |
| buf->vb.height, |
| buf->fmt->fourcc); |
| break; |
| case V4L2_PIX_FMT_GREY: |
| memcpy(vbuf, tmpbuf, buf->vb.width * buf->vb.height); |
| break; |
| case V4L2_PIX_FMT_JPEG: |
| buf->vb.size = jpgsize; |
| memcpy(vbuf, tmpbuf, buf->vb.size); |
| break; |
| case V4L2_PIX_FMT_YUV422P: |
| memcpy(vbuf, tmpbuf, |
| buf->vb.width * buf->vb.height * 2); |
| break; |
| default: |
| printk(KERN_DEBUG "s2255: unknown format?\n"); |
| } |
| dev->last_frame[chn] = -1; |
| } else { |
| printk(KERN_ERR "s2255: =======no frame\n"); |
| return; |
| |
| } |
| dprintk(2, "s2255fill at : Buffer 0x%08lx size= %d\n", |
| (unsigned long)vbuf, pos); |
| /* tell v4l buffer was filled */ |
| |
| buf->vb.field_count = dev->frame_count[chn] * 2; |
| do_gettimeofday(&ts); |
| buf->vb.ts = ts; |
| buf->vb.state = VIDEOBUF_DONE; |
| } |
| |
| |
| /* ------------------------------------------------------------------ |
| Videobuf operations |
| ------------------------------------------------------------------*/ |
| |
| static int buffer_setup(struct videobuf_queue *vq, unsigned int *count, |
| unsigned int *size) |
| { |
| struct s2255_fh *fh = vq->priv_data; |
| |
| *size = fh->width * fh->height * (fh->fmt->depth >> 3); |
| |
| if (0 == *count) |
| *count = S2255_DEF_BUFS; |
| |
| while (*size * (*count) > vid_limit * 1024 * 1024) |
| (*count)--; |
| |
| return 0; |
| } |
| |
| static void free_buffer(struct videobuf_queue *vq, struct s2255_buffer *buf) |
| { |
| dprintk(4, "%s\n", __func__); |
| |
| videobuf_vmalloc_free(&buf->vb); |
| buf->vb.state = VIDEOBUF_NEEDS_INIT; |
| } |
| |
| static int buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, |
| enum v4l2_field field) |
| { |
| struct s2255_fh *fh = vq->priv_data; |
| struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb); |
| int rc; |
| dprintk(4, "%s, field=%d\n", __func__, field); |
| if (fh->fmt == NULL) |
| return -EINVAL; |
| |
| if ((fh->width < norm_minw(fh->dev->vdev[fh->channel])) || |
| (fh->width > norm_maxw(fh->dev->vdev[fh->channel])) || |
| (fh->height < norm_minh(fh->dev->vdev[fh->channel])) || |
| (fh->height > norm_maxh(fh->dev->vdev[fh->channel]))) { |
| dprintk(4, "invalid buffer prepare\n"); |
| return -EINVAL; |
| } |
| |
| buf->vb.size = fh->width * fh->height * (fh->fmt->depth >> 3); |
| |
| if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) { |
| dprintk(4, "invalid buffer prepare\n"); |
| return -EINVAL; |
| } |
| |
| buf->fmt = fh->fmt; |
| buf->vb.width = fh->width; |
| buf->vb.height = fh->height; |
| buf->vb.field = field; |
| |
| |
| if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { |
| rc = videobuf_iolock(vq, &buf->vb, NULL); |
| if (rc < 0) |
| goto fail; |
| } |
| |
| buf->vb.state = VIDEOBUF_PREPARED; |
| return 0; |
| fail: |
| free_buffer(vq, buf); |
| return rc; |
| } |
| |
| static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) |
| { |
| struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb); |
| struct s2255_fh *fh = vq->priv_data; |
| struct s2255_dev *dev = fh->dev; |
| struct s2255_dmaqueue *vidq = &dev->vidq[fh->channel]; |
| |
| dprintk(1, "%s\n", __func__); |
| |
| buf->vb.state = VIDEOBUF_QUEUED; |
| list_add_tail(&buf->vb.queue, &vidq->active); |
| } |
| |
| static void buffer_release(struct videobuf_queue *vq, |
| struct videobuf_buffer *vb) |
| { |
| struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb); |
| struct s2255_fh *fh = vq->priv_data; |
| dprintk(4, "%s %d\n", __func__, fh->channel); |
| free_buffer(vq, buf); |
| } |
| |
| static struct videobuf_queue_ops s2255_video_qops = { |
| .buf_setup = buffer_setup, |
| .buf_prepare = buffer_prepare, |
| .buf_queue = buffer_queue, |
| .buf_release = buffer_release, |
| }; |
| |
| |
| static int res_get(struct s2255_dev *dev, struct s2255_fh *fh) |
| { |
| /* is it free? */ |
| mutex_lock(&dev->lock); |
| if (dev->resources[fh->channel]) { |
| /* no, someone else uses it */ |
| mutex_unlock(&dev->lock); |
| return 0; |
| } |
| /* it's free, grab it */ |
| dev->resources[fh->channel] = 1; |
| fh->resources[fh->channel] = 1; |
| dprintk(1, "s2255: res: get\n"); |
| mutex_unlock(&dev->lock); |
| return 1; |
| } |
| |
| static int res_locked(struct s2255_dev *dev, struct s2255_fh *fh) |
| { |
| return dev->resources[fh->channel]; |
| } |
| |
| static int res_check(struct s2255_fh *fh) |
| { |
| return fh->resources[fh->channel]; |
| } |
| |
| |
| static void res_free(struct s2255_dev *dev, struct s2255_fh *fh) |
| { |
| mutex_lock(&dev->lock); |
| dev->resources[fh->channel] = 0; |
| fh->resources[fh->channel] = 0; |
| mutex_unlock(&dev->lock); |
| dprintk(1, "res: put\n"); |
| } |
| |
| |
| static int vidioc_querycap(struct file *file, void *priv, |
| struct v4l2_capability *cap) |
| { |
| struct s2255_fh *fh = file->private_data; |
| struct s2255_dev *dev = fh->dev; |
| strlcpy(cap->driver, "s2255", sizeof(cap->driver)); |
| strlcpy(cap->card, "s2255", sizeof(cap->card)); |
| usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info)); |
| cap->version = S2255_VERSION; |
| cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; |
| return 0; |
| } |
| |
| static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| int index = 0; |
| if (f) |
| index = f->index; |
| |
| if (index >= ARRAY_SIZE(formats)) |
| return -EINVAL; |
| |
| dprintk(4, "name %s\n", formats[index].name); |
| strlcpy(f->description, formats[index].name, sizeof(f->description)); |
| f->pixelformat = formats[index].fourcc; |
| return 0; |
| } |
| |
| static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct s2255_fh *fh = priv; |
| |
| f->fmt.pix.width = fh->width; |
| f->fmt.pix.height = fh->height; |
| f->fmt.pix.field = fh->vb_vidq.field; |
| f->fmt.pix.pixelformat = fh->fmt->fourcc; |
| f->fmt.pix.bytesperline = f->fmt.pix.width * (fh->fmt->depth >> 3); |
| f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; |
| return 0; |
| } |
| |
| static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| const struct s2255_fmt *fmt; |
| enum v4l2_field field; |
| int b_any_field = 0; |
| struct s2255_fh *fh = priv; |
| struct s2255_dev *dev = fh->dev; |
| int is_ntsc; |
| |
| is_ntsc = |
| (dev->vdev[fh->channel]->current_norm & V4L2_STD_NTSC) ? 1 : 0; |
| |
| fmt = format_by_fourcc(f->fmt.pix.pixelformat); |
| |
| if (fmt == NULL) |
| return -EINVAL; |
| |
| field = f->fmt.pix.field; |
| if (field == V4L2_FIELD_ANY) |
| b_any_field = 1; |
| |
| dprintk(4, "try format %d \n", is_ntsc); |
| /* supports 3 sizes. see s2255drv.h */ |
| dprintk(50, "width test %d, height %d\n", |
| f->fmt.pix.width, f->fmt.pix.height); |
| if (is_ntsc) { |
| /* NTSC */ |
| if (f->fmt.pix.height >= NUM_LINES_1CIFS_NTSC * 2) { |
| f->fmt.pix.height = NUM_LINES_1CIFS_NTSC * 2; |
| if (b_any_field) { |
| field = V4L2_FIELD_SEQ_TB; |
| } else if (!((field == V4L2_FIELD_INTERLACED) || |
| (field == V4L2_FIELD_SEQ_TB) || |
| (field == V4L2_FIELD_INTERLACED_TB))) { |
| dprintk(1, "unsupported field setting\n"); |
| return -EINVAL; |
| } |
| } else { |
| f->fmt.pix.height = NUM_LINES_1CIFS_NTSC; |
| if (b_any_field) { |
| field = V4L2_FIELD_TOP; |
| } else if (!((field == V4L2_FIELD_TOP) || |
| (field == V4L2_FIELD_BOTTOM))) { |
| dprintk(1, "unsupported field setting\n"); |
| return -EINVAL; |
| } |
| |
| } |
| if (f->fmt.pix.width >= LINE_SZ_4CIFS_NTSC) |
| f->fmt.pix.width = LINE_SZ_4CIFS_NTSC; |
| else if (f->fmt.pix.width >= LINE_SZ_2CIFS_NTSC) |
| f->fmt.pix.width = LINE_SZ_2CIFS_NTSC; |
| else if (f->fmt.pix.width >= LINE_SZ_1CIFS_NTSC) |
| f->fmt.pix.width = LINE_SZ_1CIFS_NTSC; |
| else |
| f->fmt.pix.width = LINE_SZ_1CIFS_NTSC; |
| } else { |
| /* PAL */ |
| if (f->fmt.pix.height >= NUM_LINES_1CIFS_PAL * 2) { |
| f->fmt.pix.height = NUM_LINES_1CIFS_PAL * 2; |
| if (b_any_field) { |
| field = V4L2_FIELD_SEQ_TB; |
| } else if (!((field == V4L2_FIELD_INTERLACED) || |
| (field == V4L2_FIELD_SEQ_TB) || |
| (field == V4L2_FIELD_INTERLACED_TB))) { |
| dprintk(1, "unsupported field setting\n"); |
| return -EINVAL; |
| } |
| } else { |
| f->fmt.pix.height = NUM_LINES_1CIFS_PAL; |
| if (b_any_field) { |
| field = V4L2_FIELD_TOP; |
| } else if (!((field == V4L2_FIELD_TOP) || |
| (field == V4L2_FIELD_BOTTOM))) { |
| dprintk(1, "unsupported field setting\n"); |
| return -EINVAL; |
| } |
| } |
| if (f->fmt.pix.width >= LINE_SZ_4CIFS_PAL) { |
| dprintk(50, "pal 704\n"); |
| f->fmt.pix.width = LINE_SZ_4CIFS_PAL; |
| field = V4L2_FIELD_SEQ_TB; |
| } else if (f->fmt.pix.width >= LINE_SZ_2CIFS_PAL) { |
| dprintk(50, "pal 352A\n"); |
| f->fmt.pix.width = LINE_SZ_2CIFS_PAL; |
| field = V4L2_FIELD_TOP; |
| } else if (f->fmt.pix.width >= LINE_SZ_1CIFS_PAL) { |
| dprintk(50, "pal 352B\n"); |
| f->fmt.pix.width = LINE_SZ_1CIFS_PAL; |
| field = V4L2_FIELD_TOP; |
| } else { |
| dprintk(50, "pal 352C\n"); |
| f->fmt.pix.width = LINE_SZ_1CIFS_PAL; |
| field = V4L2_FIELD_TOP; |
| } |
| } |
| |
| dprintk(50, "width %d height %d field %d \n", f->fmt.pix.width, |
| f->fmt.pix.height, f->fmt.pix.field); |
| f->fmt.pix.field = field; |
| f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; |
| f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; |
| return 0; |
| } |
| |
| static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct s2255_fh *fh = priv; |
| const struct s2255_fmt *fmt; |
| struct videobuf_queue *q = &fh->vb_vidq; |
| int ret; |
| int norm; |
| |
| ret = vidioc_try_fmt_vid_cap(file, fh, f); |
| |
| if (ret < 0) |
| return ret; |
| |
| fmt = format_by_fourcc(f->fmt.pix.pixelformat); |
| |
| if (fmt == NULL) |
| return -EINVAL; |
| |
| mutex_lock(&q->vb_lock); |
| |
| if (videobuf_queue_is_busy(&fh->vb_vidq)) { |
| dprintk(1, "queue busy\n"); |
| ret = -EBUSY; |
| goto out_s_fmt; |
| } |
| |
| if (res_locked(fh->dev, fh)) { |
| dprintk(1, "can't change format after started\n"); |
| ret = -EBUSY; |
| goto out_s_fmt; |
| } |
| |
| fh->fmt = fmt; |
| fh->width = f->fmt.pix.width; |
| fh->height = f->fmt.pix.height; |
| fh->vb_vidq.field = f->fmt.pix.field; |
| fh->type = f->type; |
| norm = norm_minw(fh->dev->vdev[fh->channel]); |
| if (fh->width > norm_minw(fh->dev->vdev[fh->channel])) { |
| if (fh->height > norm_minh(fh->dev->vdev[fh->channel])) { |
| if (fh->dev->cap_parm[fh->channel].capturemode & |
| V4L2_MODE_HIGHQUALITY) { |
| fh->mode.scale = SCALE_4CIFSI; |
| dprintk(2, "scale 4CIFSI\n"); |
| } else { |
| fh->mode.scale = SCALE_4CIFS; |
| dprintk(2, "scale 4CIFS\n"); |
| } |
| } else |
| fh->mode.scale = SCALE_2CIFS; |
| |
| } else { |
| fh->mode.scale = SCALE_1CIFS; |
| } |
| |
| /* color mode */ |
| switch (fh->fmt->fourcc) { |
| case V4L2_PIX_FMT_GREY: |
| fh->mode.color = COLOR_Y8; |
| break; |
| case V4L2_PIX_FMT_JPEG: |
| fh->mode.color = COLOR_JPG | |
| (fh->dev->jc[fh->channel].quality << 8); |
| break; |
| case V4L2_PIX_FMT_YUV422P: |
| fh->mode.color = COLOR_YUVPL; |
| break; |
| case V4L2_PIX_FMT_YUYV: |
| case V4L2_PIX_FMT_UYVY: |
| default: |
| fh->mode.color = COLOR_YUVPK; |
| break; |
| } |
| ret = 0; |
| out_s_fmt: |
| mutex_unlock(&q->vb_lock); |
| return ret; |
| } |
| |
| static int vidioc_reqbufs(struct file *file, void *priv, |
| struct v4l2_requestbuffers *p) |
| { |
| int rc; |
| struct s2255_fh *fh = priv; |
| rc = videobuf_reqbufs(&fh->vb_vidq, p); |
| return rc; |
| } |
| |
| static int vidioc_querybuf(struct file *file, void *priv, struct v4l2_buffer *p) |
| { |
| int rc; |
| struct s2255_fh *fh = priv; |
| rc = videobuf_querybuf(&fh->vb_vidq, p); |
| return rc; |
| } |
| |
| static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) |
| { |
| int rc; |
| struct s2255_fh *fh = priv; |
| rc = videobuf_qbuf(&fh->vb_vidq, p); |
| return rc; |
| } |
| |
| static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) |
| { |
| int rc; |
| struct s2255_fh *fh = priv; |
| rc = videobuf_dqbuf(&fh->vb_vidq, p, file->f_flags & O_NONBLOCK); |
| return rc; |
| } |
| |
| #ifdef CONFIG_VIDEO_V4L1_COMPAT |
| static int vidioc_cgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf) |
| { |
| struct s2255_fh *fh = priv; |
| |
| return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8); |
| } |
| #endif |
| |
| /* write to the configuration pipe, synchronously */ |
| static int s2255_write_config(struct usb_device *udev, unsigned char *pbuf, |
| int size) |
| { |
| int pipe; |
| int done; |
| long retval = -1; |
| if (udev) { |
| pipe = usb_sndbulkpipe(udev, S2255_CONFIG_EP); |
| retval = usb_bulk_msg(udev, pipe, pbuf, size, &done, 500); |
| } |
| return retval; |
| } |
| |
| static u32 get_transfer_size(struct s2255_mode *mode) |
| { |
| int linesPerFrame = LINE_SZ_DEF; |
| int pixelsPerLine = NUM_LINES_DEF; |
| u32 outImageSize; |
| u32 usbInSize; |
| unsigned int mask_mult; |
| |
| if (mode == NULL) |
| return 0; |
| |
| if (mode->format == FORMAT_NTSC) { |
| switch (mode->scale) { |
| case SCALE_4CIFS: |
| case SCALE_4CIFSI: |
| linesPerFrame = NUM_LINES_4CIFS_NTSC * 2; |
| pixelsPerLine = LINE_SZ_4CIFS_NTSC; |
| break; |
| case SCALE_2CIFS: |
| linesPerFrame = NUM_LINES_2CIFS_NTSC; |
| pixelsPerLine = LINE_SZ_2CIFS_NTSC; |
| break; |
| case SCALE_1CIFS: |
| linesPerFrame = NUM_LINES_1CIFS_NTSC; |
| pixelsPerLine = LINE_SZ_1CIFS_NTSC; |
| break; |
| default: |
| break; |
| } |
| } else if (mode->format == FORMAT_PAL) { |
| switch (mode->scale) { |
| case SCALE_4CIFS: |
| case SCALE_4CIFSI: |
| linesPerFrame = NUM_LINES_4CIFS_PAL * 2; |
| pixelsPerLine = LINE_SZ_4CIFS_PAL; |
| break; |
| case SCALE_2CIFS: |
| linesPerFrame = NUM_LINES_2CIFS_PAL; |
| pixelsPerLine = LINE_SZ_2CIFS_PAL; |
| break; |
| case SCALE_1CIFS: |
| linesPerFrame = NUM_LINES_1CIFS_PAL; |
| pixelsPerLine = LINE_SZ_1CIFS_PAL; |
| break; |
| default: |
| break; |
| } |
| } |
| outImageSize = linesPerFrame * pixelsPerLine; |
| if ((mode->color & MASK_COLOR) != COLOR_Y8) { |
| /* 2 bytes/pixel if not monochrome */ |
| outImageSize *= 2; |
| } |
| |
| /* total bytes to send including prefix and 4K padding; |
| must be a multiple of USB_READ_SIZE */ |
| usbInSize = outImageSize + PREFIX_SIZE; /* always send prefix */ |
| mask_mult = 0xffffffffUL - DEF_USB_BLOCK + 1; |
| /* if size not a multiple of USB_READ_SIZE */ |
| if (usbInSize & ~mask_mult) |
| usbInSize = (usbInSize & mask_mult) + (DEF_USB_BLOCK); |
| return usbInSize; |
| } |
| |
| static void dump_verify_mode(struct s2255_dev *sdev, struct s2255_mode *mode) |
| { |
| struct device *dev = &sdev->udev->dev; |
| dev_info(dev, "------------------------------------------------\n"); |
| dev_info(dev, "verify mode\n"); |
| dev_info(dev, "format: %d\n", mode->format); |
| dev_info(dev, "scale: %d\n", mode->scale); |
| dev_info(dev, "fdec: %d\n", mode->fdec); |
| dev_info(dev, "color: %d\n", mode->color); |
| dev_info(dev, "bright: 0x%x\n", mode->bright); |
| dev_info(dev, "restart: 0x%x\n", mode->restart); |
| dev_info(dev, "usb_block: 0x%x\n", mode->usb_block); |
| dev_info(dev, "single: 0x%x\n", mode->single); |
| dev_info(dev, "------------------------------------------------\n"); |
| } |
| |
| /* |
| * set mode is the function which controls the DSP. |
| * the restart parameter in struct s2255_mode should be set whenever |
| * the image size could change via color format, video system or image |
| * size. |
| * When the restart parameter is set, we sleep for ONE frame to allow the |
| * DSP time to get the new frame |
| */ |
| static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, |
| struct s2255_mode *mode) |
| { |
| int res; |
| u32 *buffer; |
| unsigned long chn_rev; |
| |
| mutex_lock(&dev->lock); |
| chn_rev = G_chnmap[chn]; |
| dprintk(3, "mode scale [%ld] %p %d\n", chn, mode, mode->scale); |
| dprintk(3, "mode scale [%ld] %p %d\n", chn, &dev->mode[chn], |
| dev->mode[chn].scale); |
| dprintk(2, "mode contrast %x\n", mode->contrast); |
| |
| /* if JPEG, set the quality */ |
| if ((mode->color & MASK_COLOR) == COLOR_JPG) |
| mode->color = (dev->jc[chn].quality << 8) | COLOR_JPG; |
| |
| /* save the mode */ |
| dev->mode[chn] = *mode; |
| dev->req_image_size[chn] = get_transfer_size(mode); |
| dprintk(1, "transfer size %ld\n", dev->req_image_size[chn]); |
| |
| buffer = kzalloc(512, GFP_KERNEL); |
| if (buffer == NULL) { |
| dev_err(&dev->udev->dev, "out of mem\n"); |
| mutex_unlock(&dev->lock); |
| return -ENOMEM; |
| } |
| |
| /* set the mode */ |
| buffer[0] = IN_DATA_TOKEN; |
| buffer[1] = (u32) chn_rev; |
| buffer[2] = CMD_SET_MODE; |
| memcpy(&buffer[3], &dev->mode[chn], sizeof(struct s2255_mode)); |
| dev->setmode_ready[chn] = 0; |
| res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512); |
| if (debug) |
| dump_verify_mode(dev, mode); |
| kfree(buffer); |
| dprintk(1, "set mode done chn %lu, %d\n", chn, res); |
| |
| /* wait at least 3 frames before continuing */ |
| if (mode->restart) { |
| wait_event_timeout(dev->wait_setmode[chn], |
| (dev->setmode_ready[chn] != 0), |
| msecs_to_jiffies(S2255_SETMODE_TIMEOUT)); |
| if (dev->setmode_ready[chn] != 1) { |
| printk(KERN_DEBUG "s2255: no set mode response\n"); |
| res = -EFAULT; |
| } |
| } |
| |
| /* clear the restart flag */ |
| dev->mode[chn].restart = 0; |
| mutex_unlock(&dev->lock); |
| return res; |
| } |
| |
| static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) |
| { |
| int res; |
| struct s2255_fh *fh = priv; |
| struct s2255_dev *dev = fh->dev; |
| struct s2255_mode *new_mode; |
| struct s2255_mode *old_mode; |
| int chn; |
| int j; |
| dprintk(4, "%s\n", __func__); |
| if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { |
| dev_err(&dev->udev->dev, "invalid fh type0\n"); |
| return -EINVAL; |
| } |
| if (i != fh->type) { |
| dev_err(&dev->udev->dev, "invalid fh type1\n"); |
| return -EINVAL; |
| } |
| |
| if (!res_get(dev, fh)) { |
| s2255_dev_err(&dev->udev->dev, "stream busy\n"); |
| return -EBUSY; |
| } |
| |
| /* send a set mode command everytime with restart. |
| in case we switch resolutions or other parameters */ |
| chn = fh->channel; |
| new_mode = &fh->mode; |
| old_mode = &fh->dev->mode[chn]; |
| |
| if (new_mode->color != old_mode->color) |
| new_mode->restart = 1; |
| else if (new_mode->scale != old_mode->scale) |
| new_mode->restart = 1; |
| else if (new_mode->format != old_mode->format) |
| new_mode->restart = 1; |
| |
| s2255_set_mode(dev, chn, new_mode); |
| new_mode->restart = 0; |
| *old_mode = *new_mode; |
| dev->cur_fmt[chn] = fh->fmt; |
| dprintk(1, "%s[%d]\n", __func__, chn); |
| dev->last_frame[chn] = -1; |
| dev->bad_payload[chn] = 0; |
| dev->cur_frame[chn] = 0; |
| dev->frame_count[chn] = 0; |
| for (j = 0; j < SYS_FRAMES; j++) { |
| dev->buffer[chn].frame[j].ulState = S2255_READ_IDLE; |
| dev->buffer[chn].frame[j].cur_size = 0; |
| } |
| res = videobuf_streamon(&fh->vb_vidq); |
| if (res == 0) { |
| s2255_start_acquire(dev, chn); |
| dev->b_acquire[chn] = 1; |
| } else { |
| res_free(dev, fh); |
| } |
| return res; |
| } |
| |
| static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_dev *dev = fh->dev; |
| |
| dprintk(4, "%s\n, channel: %d", __func__, fh->channel); |
| if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { |
| printk(KERN_ERR "invalid fh type0\n"); |
| return -EINVAL; |
| } |
| if (i != fh->type) { |
| printk(KERN_ERR "invalid type i\n"); |
| return -EINVAL; |
| } |
| s2255_stop_acquire(dev, fh->channel); |
| videobuf_streamoff(&fh->vb_vidq); |
| res_free(dev, fh); |
| return 0; |
| } |
| |
| static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_mode *mode; |
| struct videobuf_queue *q = &fh->vb_vidq; |
| int ret = 0; |
| |
| mutex_lock(&q->vb_lock); |
| if (videobuf_queue_is_busy(q)) { |
| dprintk(1, "queue busy\n"); |
| ret = -EBUSY; |
| goto out_s_std; |
| } |
| |
| if (res_locked(fh->dev, fh)) { |
| dprintk(1, "can't change standard after started\n"); |
| ret = -EBUSY; |
| goto out_s_std; |
| } |
| mode = &fh->mode; |
| |
| if (*i & V4L2_STD_NTSC) { |
| dprintk(4, "vidioc_s_std NTSC\n"); |
| mode->format = FORMAT_NTSC; |
| } else if (*i & V4L2_STD_PAL) { |
| dprintk(4, "vidioc_s_std PAL\n"); |
| mode->format = FORMAT_PAL; |
| } else { |
| ret = -EINVAL; |
| } |
| out_s_std: |
| mutex_unlock(&q->vb_lock); |
| return ret; |
| } |
| |
| /* Sensoray 2255 is a multiple channel capture device. |
| It does not have a "crossbar" of inputs. |
| We use one V4L device per channel. The user must |
| be aware that certain combinations are not allowed. |
| For instance, you cannot do full FPS on more than 2 channels(2 videodevs) |
| at once in color(you can do full fps on 4 channels with greyscale. |
| */ |
| static int vidioc_enum_input(struct file *file, void *priv, |
| struct v4l2_input *inp) |
| { |
| if (inp->index != 0) |
| return -EINVAL; |
| |
| inp->type = V4L2_INPUT_TYPE_CAMERA; |
| inp->std = S2255_NORMS; |
| strlcpy(inp->name, "Camera", sizeof(inp->name)); |
| return 0; |
| } |
| |
| static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) |
| { |
| *i = 0; |
| return 0; |
| } |
| static int vidioc_s_input(struct file *file, void *priv, unsigned int i) |
| { |
| if (i > 0) |
| return -EINVAL; |
| return 0; |
| } |
| |
| /* --- controls ---------------------------------------------- */ |
| static int vidioc_queryctrl(struct file *file, void *priv, |
| struct v4l2_queryctrl *qc) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(s2255_qctrl); i++) |
| if (qc->id && qc->id == s2255_qctrl[i].id) { |
| memcpy(qc, &(s2255_qctrl[i]), sizeof(*qc)); |
| return 0; |
| } |
| |
| dprintk(4, "query_ctrl -EINVAL %d\n", qc->id); |
| return -EINVAL; |
| } |
| |
| static int vidioc_g_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(s2255_qctrl); i++) |
| if (ctrl->id == s2255_qctrl[i].id) { |
| ctrl->value = qctl_regs[i]; |
| return 0; |
| } |
| dprintk(4, "g_ctrl -EINVAL\n"); |
| |
| return -EINVAL; |
| } |
| |
| static int vidioc_s_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| int i; |
| struct s2255_fh *fh = priv; |
| struct s2255_dev *dev = fh->dev; |
| struct s2255_mode *mode; |
| mode = &fh->mode; |
| dprintk(4, "vidioc_s_ctrl\n"); |
| for (i = 0; i < ARRAY_SIZE(s2255_qctrl); i++) { |
| if (ctrl->id == s2255_qctrl[i].id) { |
| if (ctrl->value < s2255_qctrl[i].minimum || |
| ctrl->value > s2255_qctrl[i].maximum) |
| return -ERANGE; |
| |
| qctl_regs[i] = ctrl->value; |
| /* update the mode to the corresponding value */ |
| switch (ctrl->id) { |
| case V4L2_CID_BRIGHTNESS: |
| mode->bright = ctrl->value; |
| break; |
| case V4L2_CID_CONTRAST: |
| mode->contrast = ctrl->value; |
| break; |
| case V4L2_CID_HUE: |
| mode->hue = ctrl->value; |
| break; |
| case V4L2_CID_SATURATION: |
| mode->saturation = ctrl->value; |
| break; |
| } |
| mode->restart = 0; |
| /* set mode here. Note: stream does not need restarted. |
| some V4L programs restart stream unnecessarily |
| after a s_crtl. |
| */ |
| s2255_set_mode(dev, fh->channel, mode); |
| return 0; |
| } |
| } |
| return -EINVAL; |
| } |
| |
| static int vidioc_g_jpegcomp(struct file *file, void *priv, |
| struct v4l2_jpegcompression *jc) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_dev *dev = fh->dev; |
| *jc = dev->jc[fh->channel]; |
| dprintk(2, "getting jpegcompression, quality %d\n", jc->quality); |
| return 0; |
| } |
| |
| static int vidioc_s_jpegcomp(struct file *file, void *priv, |
| struct v4l2_jpegcompression *jc) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_dev *dev = fh->dev; |
| if (jc->quality < 0 || jc->quality > 100) |
| return -EINVAL; |
| dev->jc[fh->channel].quality = jc->quality; |
| dprintk(2, "setting jpeg quality %d\n", jc->quality); |
| return 0; |
| } |
| |
| static int vidioc_g_parm(struct file *file, void *priv, |
| struct v4l2_streamparm *sp) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_dev *dev = fh->dev; |
| if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| sp->parm.capture.capturemode = dev->cap_parm[fh->channel].capturemode; |
| dprintk(2, "getting parm %d\n", sp->parm.capture.capturemode); |
| return 0; |
| } |
| |
| static int vidioc_s_parm(struct file *file, void *priv, |
| struct v4l2_streamparm *sp) |
| { |
| struct s2255_fh *fh = priv; |
| struct s2255_dev *dev = fh->dev; |
| |
| if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| |
| dev->cap_parm[fh->channel].capturemode = sp->parm.capture.capturemode; |
| dprintk(2, "setting param capture mode %d\n", |
| sp->parm.capture.capturemode); |
| return 0; |
| } |
| static int s2255_open(struct file *file) |
| { |
| int minor = video_devdata(file)->minor; |
| struct s2255_dev *h, *dev = NULL; |
| struct s2255_fh *fh; |
| struct list_head *list; |
| enum v4l2_buf_type type = 0; |
| int i = 0; |
| int cur_channel = -1; |
| int state; |
| dprintk(1, "s2255: open called (minor=%d)\n", minor); |
| |
| lock_kernel(); |
| list_for_each(list, &s2255_devlist) { |
| h = list_entry(list, struct s2255_dev, s2255_devlist); |
| for (i = 0; i < MAX_CHANNELS; i++) { |
| if (h->vdev[i]->minor == minor) { |
| cur_channel = i; |
| dev = h; |
| type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| } |
| } |
| } |
| |
| if ((NULL == dev) || (cur_channel == -1)) { |
| unlock_kernel(); |
| printk(KERN_INFO "s2255: openv4l no dev\n"); |
| return -ENODEV; |
| } |
| |
| if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_DISCONNECTING) { |
| unlock_kernel(); |
| printk(KERN_INFO "disconnecting\n"); |
| return -ENODEV; |
| } |
| kref_get(&dev->kref); |
| mutex_lock(&dev->open_lock); |
| |
| dev->users[cur_channel]++; |
| dprintk(4, "s2255: open_handles %d\n", dev->users[cur_channel]); |
| |
| switch (atomic_read(&dev->fw_data->fw_state)) { |
| case S2255_FW_FAILED: |
| s2255_dev_err(&dev->udev->dev, |
| "firmware load failed. retrying.\n"); |
| s2255_fwload_start(dev, 1); |
| wait_event_timeout(dev->fw_data->wait_fw, |
| ((atomic_read(&dev->fw_data->fw_state) |
| == S2255_FW_SUCCESS) || |
| (atomic_read(&dev->fw_data->fw_state) |
| == S2255_FW_DISCONNECTING)), |
| msecs_to_jiffies(S2255_LOAD_TIMEOUT)); |
| break; |
| case S2255_FW_NOTLOADED: |
| case S2255_FW_LOADED_DSPWAIT: |
| /* give S2255_LOAD_TIMEOUT time for firmware to load in case |
| driver loaded and then device immediately opened */ |
| printk(KERN_INFO "%s waiting for firmware load\n", __func__); |
| wait_event_timeout(dev->fw_data->wait_fw, |
| ((atomic_read(&dev->fw_data->fw_state) |
| == S2255_FW_SUCCESS) || |
| (atomic_read(&dev->fw_data->fw_state) |
| == S2255_FW_DISCONNECTING)), |
| msecs_to_jiffies(S2255_LOAD_TIMEOUT)); |
| break; |
| case S2255_FW_SUCCESS: |
| default: |
| break; |
| } |
| state = atomic_read(&dev->fw_data->fw_state); |
| if (state != S2255_FW_SUCCESS) { |
| int rc; |
| switch (state) { |
| case S2255_FW_FAILED: |
| printk(KERN_INFO "2255 FW load failed. %d\n", state); |
| rc = -ENODEV; |
| break; |
| case S2255_FW_DISCONNECTING: |
| printk(KERN_INFO "%s: disconnecting\n", __func__); |
| rc = -ENODEV; |
| break; |
| case S2255_FW_LOADED_DSPWAIT: |
| case S2255_FW_NOTLOADED: |
| printk(KERN_INFO "%s: firmware not loaded yet" |
| "please try again later\n", |
| __func__); |
| rc = -EAGAIN; |
| break; |
| default: |
| printk(KERN_INFO "%s: unknown state\n", __func__); |
| rc = -EFAULT; |
| break; |
| } |
| dev->users[cur_channel]--; |
| mutex_unlock(&dev->open_lock); |
| kref_put(&dev->kref, s2255_destroy); |
| unlock_kernel(); |
| return rc; |
| } |
| |
| /* allocate + initialize per filehandle data */ |
| fh = kzalloc(sizeof(*fh), GFP_KERNEL); |
| if (NULL == fh) { |
| dev->users[cur_channel]--; |
| mutex_unlock(&dev->open_lock); |
| kref_put(&dev->kref, s2255_destroy); |
| unlock_kernel(); |
| return -ENOMEM; |
| } |
| |
| file->private_data = fh; |
| fh->dev = dev; |
| fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| fh->mode = dev->mode[cur_channel]; |
| fh->fmt = dev->cur_fmt[cur_channel]; |
| /* default 4CIF NTSC */ |
| fh->width = LINE_SZ_4CIFS_NTSC; |
| fh->height = NUM_LINES_4CIFS_NTSC * 2; |
| fh->channel = cur_channel; |
| |
| /* configure channel to default state */ |
| if (!dev->chn_configured[cur_channel]) { |
| s2255_set_mode(dev, cur_channel, &fh->mode); |
| dev->chn_configured[cur_channel] = 1; |
| } |
| |
| |
| /* Put all controls at a sane state */ |
| for (i = 0; i < ARRAY_SIZE(s2255_qctrl); i++) |
| qctl_regs[i] = s2255_qctrl[i].default_value; |
| |
| dprintk(1, "s2255drv: open minor=%d type=%s users=%d\n", |
| minor, v4l2_type_names[type], dev->users[cur_channel]); |
| dprintk(2, "s2255drv: open: fh=0x%08lx, dev=0x%08lx, vidq=0x%08lx\n", |
| (unsigned long)fh, (unsigned long)dev, |
| (unsigned long)&dev->vidq[cur_channel]); |
| dprintk(4, "s2255drv: open: list_empty active=%d\n", |
| list_empty(&dev->vidq[cur_channel].active)); |
| |
| videobuf_queue_vmalloc_init(&fh->vb_vidq, &s2255_video_qops, |
| NULL, &dev->slock, |
| fh->type, |
| V4L2_FIELD_INTERLACED, |
| sizeof(struct s2255_buffer), fh); |
| |
| mutex_unlock(&dev->open_lock); |
| unlock_kernel(); |
| return 0; |
| } |
| |
| |
| static unsigned int s2255_poll(struct file *file, |
| struct poll_table_struct *wait) |
| { |
| struct s2255_fh *fh = file->private_data; |
| int rc; |
| dprintk(100, "%s\n", __func__); |
| |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) |
| return POLLERR; |
| |
| rc = videobuf_poll_stream(file, &fh->vb_vidq, wait); |
| return rc; |
| } |
| |
| static void s2255_destroy(struct kref *kref) |
| { |
| struct s2255_dev *dev = to_s2255_dev(kref); |
| struct list_head *list; |
| int i; |
| if (!dev) { |
| printk(KERN_ERR "s2255drv: kref problem\n"); |
| return; |
| } |
| atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING); |
| wake_up(&dev->fw_data->wait_fw); |
| for (i = 0; i < MAX_CHANNELS; i++) { |
| dev->setmode_ready[i] = 1; |
| wake_up(&dev->wait_setmode[i]); |
| } |
| mutex_lock(&dev->open_lock); |
| /* reset the DSP so firmware can be reload next time */ |
| s2255_reset_dsppower(dev); |
| s2255_exit_v4l(dev); |
| /* board shutdown stops the read pipe if it is running */ |
| s2255_board_shutdown(dev); |
| /* make sure firmware still not trying to load */ |
| del_timer(&dev->timer); /* only started in .probe and .open */ |
| |
| if (dev->fw_data->fw_urb) { |
| dprintk(2, "kill fw_urb\n"); |
| usb_kill_urb(dev->fw_data->fw_urb); |
| usb_free_urb(dev->fw_data->fw_urb); |
| dev->fw_data->fw_urb = NULL; |
| } |
| if (dev->fw_data->fw) |
| release_firmware(dev->fw_data->fw); |
| kfree(dev->fw_data->pfw_data); |
| kfree(dev->fw_data); |
| usb_put_dev(dev->udev); |
| dprintk(1, "%s", __func__); |
| |
| while (!list_empty(&s2255_devlist)) { |
| list = s2255_devlist.next; |
| list_del(list); |
| } |
| mutex_unlock(&dev->open_lock); |
| kfree(dev); |
| } |
| |
| static int s2255_close(struct file *file) |
| { |
| struct s2255_fh *fh = file->private_data; |
| struct s2255_dev *dev = fh->dev; |
| int minor = video_devdata(file)->minor; |
| if (!dev) |
| return -ENODEV; |
| |
| mutex_lock(&dev->open_lock); |
| |
| /* turn off stream */ |
| if (res_check(fh)) { |
| if (dev->b_acquire[fh->channel]) |
| s2255_stop_acquire(dev, fh->channel); |
| videobuf_streamoff(&fh->vb_vidq); |
| res_free(dev, fh); |
| } |
| |
| videobuf_mmap_free(&fh->vb_vidq); |
| dev->users[fh->channel]--; |
| |
| mutex_unlock(&dev->open_lock); |
| |
| kref_put(&dev->kref, s2255_destroy); |
| dprintk(1, "s2255: close called (minor=%d, users=%d)\n", |
| minor, dev->users[fh->channel]); |
| kfree(fh); |
| return 0; |
| } |
| |
| static int s2255_mmap_v4l(struct file *file, struct vm_area_struct *vma) |
| { |
| struct s2255_fh *fh = file->private_data; |
| int ret; |
| |
| if (!fh) |
| return -ENODEV; |
| dprintk(4, "mmap called, vma=0x%08lx\n", (unsigned long)vma); |
| |
| ret = videobuf_mmap_mapper(&fh->vb_vidq, vma); |
| |
| dprintk(4, "vma start=0x%08lx, size=%ld, ret=%d\n", |
| (unsigned long)vma->vm_start, |
| (unsigned long)vma->vm_end - (unsigned long)vma->vm_start, ret); |
| |
| return ret; |
| } |
| |
| static const struct v4l2_file_operations s2255_fops_v4l = { |
| .owner = THIS_MODULE, |
| .open = s2255_open, |
| .release = s2255_close, |
| .poll = s2255_poll, |
| .ioctl = video_ioctl2, /* V4L2 ioctl handler */ |
| .mmap = s2255_mmap_v4l, |
| }; |
| |
| static const struct v4l2_ioctl_ops s2255_ioctl_ops = { |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, |
| .vidioc_reqbufs = vidioc_reqbufs, |
| .vidioc_querybuf = vidioc_querybuf, |
| .vidioc_qbuf = vidioc_qbuf, |
| .vidioc_dqbuf = vidioc_dqbuf, |
| .vidioc_s_std = vidioc_s_std, |
| .vidioc_enum_input = vidioc_enum_input, |
| .vidioc_g_input = vidioc_g_input, |
| .vidioc_s_input = vidioc_s_input, |
| .vidioc_queryctrl = vidioc_queryctrl, |
| .vidioc_g_ctrl = vidioc_g_ctrl, |
| .vidioc_s_ctrl = vidioc_s_ctrl, |
| .vidioc_streamon = vidioc_streamon, |
| .vidioc_streamoff = vidioc_streamoff, |
| #ifdef CONFIG_VIDEO_V4L1_COMPAT |
| .vidiocgmbuf = vidioc_cgmbuf, |
| #endif |
| .vidioc_s_jpegcomp = vidioc_s_jpegcomp, |
| .vidioc_g_jpegcomp = vidioc_g_jpegcomp, |
| .vidioc_s_parm = vidioc_s_parm, |
| .vidioc_g_parm = vidioc_g_parm, |
| }; |
| |
| static struct video_device template = { |
| .name = "s2255v", |
| .fops = &s2255_fops_v4l, |
| .ioctl_ops = &s2255_ioctl_ops, |
| .minor = -1, |
| .release = video_device_release, |
| .tvnorms = S2255_NORMS, |
| .current_norm = V4L2_STD_NTSC_M, |
| }; |
| |
| static int s2255_probe_v4l(struct s2255_dev *dev) |
| { |
| int ret; |
| int i; |
| int cur_nr = video_nr; |
| |
| /* initialize all video 4 linux */ |
| list_add_tail(&dev->s2255_devlist, &s2255_devlist); |
| /* register 4 video devices */ |
| for (i = 0; i < MAX_CHANNELS; i++) { |
| INIT_LIST_HEAD(&dev->vidq[i].active); |
| dev->vidq[i].dev = dev; |
| dev->vidq[i].channel = i; |
| /* register 4 video devices */ |
| dev->vdev[i] = video_device_alloc(); |
| memcpy(dev->vdev[i], &template, sizeof(struct video_device)); |
| dev->vdev[i]->parent = &dev->interface->dev; |
| if (video_nr == -1) |
| ret = video_register_device(dev->vdev[i], |
| VFL_TYPE_GRABBER, |
| video_nr); |
| else |
| ret = video_register_device(dev->vdev[i], |
| VFL_TYPE_GRABBER, |
| cur_nr + i); |
| video_set_drvdata(dev->vdev[i], dev); |
| |
| if (ret != 0) { |
| dev_err(&dev->udev->dev, |
| "failed to register video device!\n"); |
| return ret; |
| } |
| } |
| printk(KERN_INFO "Sensoray 2255 V4L driver Revision: %d.%d\n", |
| S2255_MAJOR_VERSION, |
| S2255_MINOR_VERSION); |
| return ret; |
| } |
| |
| static void s2255_exit_v4l(struct s2255_dev *dev) |
| { |
| |
| int i; |
| for (i = 0; i < MAX_CHANNELS; i++) { |
| if (-1 != dev->vdev[i]->minor) { |
| video_unregister_device(dev->vdev[i]); |
| printk(KERN_INFO "s2255 unregistered\n"); |
| } else { |
| video_device_release(dev->vdev[i]); |
| printk(KERN_INFO "s2255 released\n"); |
| } |
| } |
| } |
| |
| /* this function moves the usb stream read pipe data |
| * into the system buffers. |
| * returns 0 on success, EAGAIN if more data to process( call this |
| * function again). |
| * |
| * Received frame structure: |
| * bytes 0-3: marker : 0x2255DA4AL (S2255_MARKER_FRAME) |
| * bytes 4-7: channel: 0-3 |
| * bytes 8-11: payload size: size of the frame |
| * bytes 12-payloadsize+12: frame data |
| */ |
| static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) |
| { |
| char *pdest; |
| u32 offset = 0; |
| int bframe = 0; |
| char *psrc; |
| unsigned long copy_size; |
| unsigned long size; |
| s32 idx = -1; |
| struct s2255_framei *frm; |
| unsigned char *pdata; |
| |
| dprintk(100, "buffer to user\n"); |
| |
| idx = dev->cur_frame[dev->cc]; |
| frm = &dev->buffer[dev->cc].frame[idx]; |
| |
| if (frm->ulState == S2255_READ_IDLE) { |
| int jj; |
| unsigned int cc; |
| s32 *pdword; |
| int payload; |
| /* search for marker codes */ |
| pdata = (unsigned char *)pipe_info->transfer_buffer; |
| for (jj = 0; jj < (pipe_info->cur_transfer_size - 12); jj++) { |
| switch (*(s32 *) pdata) { |
| case S2255_MARKER_FRAME: |
| pdword = (s32 *)pdata; |
| dprintk(4, "found frame marker at offset:" |
| " %d [%x %x]\n", jj, pdata[0], |
| pdata[1]); |
| offset = jj + PREFIX_SIZE; |
| bframe = 1; |
| cc = pdword[1]; |
| if (cc >= MAX_CHANNELS) { |
| printk(KERN_ERR |
| "bad channel\n"); |
| return -EINVAL; |
| } |
| /* reverse it */ |
| dev->cc = G_chnmap[cc]; |
| payload = pdword[3]; |
| if (payload > dev->req_image_size[dev->cc]) { |
| dev->bad_payload[dev->cc]++; |
| /* discard the bad frame */ |
| return -EINVAL; |
| } |
| dev->pkt_size[dev->cc] = payload; |
| dev->jpg_size[dev->cc] = pdword[4]; |
| break; |
| case S2255_MARKER_RESPONSE: |
| pdword = (s32 *)pdata; |
| pdata += DEF_USB_BLOCK; |
| jj += DEF_USB_BLOCK; |
| if (pdword[1] >= MAX_CHANNELS) |
| break; |
| cc = G_chnmap[pdword[1]]; |
| if (!(cc >= 0 && cc < MAX_CHANNELS)) |
| break; |
| switch (pdword[2]) { |
| case S2255_RESPONSE_SETMODE: |
| /* check if channel valid */ |
| /* set mode ready */ |
| dev->setmode_ready[cc] = 1; |
| wake_up(&dev->wait_setmode[cc]); |
| dprintk(5, "setmode ready %d\n", cc); |
| break; |
| case S2255_RESPONSE_FW: |
| |
| dev->chn_ready |= (1 << cc); |
| if ((dev->chn_ready & 0x0f) != 0x0f) |
| break; |
| /* all channels ready */ |
| printk(KERN_INFO "s2255: fw loaded\n"); |
| atomic_set(&dev->fw_data->fw_state, |
| S2255_FW_SUCCESS); |
| wake_up(&dev->fw_data->wait_fw); |
| break; |
| default: |
| printk(KERN_INFO "s2255 unknwn resp\n"); |
| } |
| default: |
| pdata++; |
| break; |
| } |
| if (bframe) |
| break; |
| } /* for */ |
| if (!bframe) |
| return -EINVAL; |
| } |
| |
| |
| idx = dev->cur_frame[dev->cc]; |
| frm = &dev->buffer[dev->cc].frame[idx]; |
| |
| /* search done. now find out if should be acquiring on this channel */ |
| if (!dev->b_acquire[dev->cc]) { |
| /* we found a frame, but this channel is turned off */ |
| frm->ulState = S2255_READ_IDLE; |
| return -EINVAL; |
| } |
| |
| if (frm->ulState == S2255_READ_IDLE) { |
| frm->ulState = S2255_READ_FRAME; |
| frm->cur_size = 0; |
| } |
| |
| /* skip the marker 512 bytes (and offset if out of sync) */ |
| psrc = (u8 *)pipe_info->transfer_buffer + offset; |
| |
| |
| if (frm->lpvbits == NULL) { |
| dprintk(1, "s2255 frame buffer == NULL.%p %p %d %d", |
| frm, dev, dev->cc, idx); |
| return -ENOMEM; |
| } |
| |
| pdest = frm->lpvbits + frm->cur_size; |
| |
| copy_size = (pipe_info->cur_transfer_size - offset); |
| |
| size = dev->pkt_size[dev->cc] - PREFIX_SIZE; |
| |
| /* sanity check on pdest */ |
| if ((copy_size + frm->cur_size) < dev->req_image_size[dev->cc]) |
| memcpy(pdest, psrc, copy_size); |
| |
| frm->cur_size += copy_size; |
| dprintk(4, "cur_size size %lu size %lu \n", frm->cur_size, size); |
| |
| if (frm->cur_size >= size) { |
| |
| u32 cc = dev->cc; |
| dprintk(2, "****************[%d]Buffer[%d]full*************\n", |
| cc, idx); |
| dev->last_frame[cc] = dev->cur_frame[cc]; |
| dev->cur_frame[cc]++; |
| /* end of system frame ring buffer, start at zero */ |
| if ((dev->cur_frame[cc] == SYS_FRAMES) || |
| (dev->cur_frame[cc] == dev->buffer[cc].dwFrames)) |
| dev->cur_frame[cc] = 0; |
| /* frame ready */ |
| if (dev->b_acquire[cc]) |
| s2255_got_frame(dev, cc, dev->jpg_size[cc]); |
| dev->frame_count[cc]++; |
| frm->ulState = S2255_READ_IDLE; |
| frm->cur_size = 0; |
| |
| } |
| /* done successfully */ |
| return 0; |
| } |
| |
| static void s2255_read_video_callback(struct s2255_dev *dev, |
| struct s2255_pipeinfo *pipe_info) |
| { |
| int res; |
| dprintk(50, "callback read video \n"); |
| |
| if (dev->cc >= MAX_CHANNELS) { |
| dev->cc = 0; |
| dev_err(&dev->udev->dev, "invalid channel\n"); |
| return; |
| } |
| /* otherwise copy to the system buffers */ |
| res = save_frame(dev, pipe_info); |
| if (res != 0) |
| dprintk(4, "s2255: read callback failed\n"); |
| |
| dprintk(50, "callback read video done\n"); |
| return; |
| } |
| |
| static long s2255_vendor_req(struct s2255_dev *dev, unsigned char Request, |
| u16 Index, u16 Value, void *TransferBuffer, |
| s32 TransferBufferLength, int bOut) |
| { |
| int r; |
| if (!bOut) { |
| r = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), |
| Request, |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE | |
| USB_DIR_IN, |
| Value, Index, TransferBuffer, |
| TransferBufferLength, HZ * 5); |
| } else { |
| r = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), |
| Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| Value, Index, TransferBuffer, |
| TransferBufferLength, HZ * 5); |
| } |
| return r; |
| } |
| |
| /* |
| * retrieve FX2 firmware version. future use. |
| * @param dev pointer to device extension |
| * @return -1 for fail, else returns firmware version as an int(16 bits) |
| */ |
| static int s2255_get_fx2fw(struct s2255_dev *dev) |
| { |
| int fw; |
| int ret; |
| unsigned char transBuffer[64]; |
| ret = s2255_vendor_req(dev, S2255_VR_FW, 0, 0, transBuffer, 2, |
| S2255_VR_IN); |
| if (ret < 0) |
| dprintk(2, "get fw error: %x\n", ret); |
| fw = transBuffer[0] + (transBuffer[1] << 8); |
| dprintk(2, "Get FW %x %x\n", transBuffer[0], transBuffer[1]); |
| return fw; |
| } |
| |
| /* |
| * Create the system ring buffer to copy frames into from the |
| * usb read pipe. |
| */ |
| static int s2255_create_sys_buffers(struct s2255_dev *dev, unsigned long chn) |
| { |
| unsigned long i; |
| unsigned long reqsize; |
| dprintk(1, "create sys buffers\n"); |
| if (chn >= MAX_CHANNELS) |
| return -1; |
| |
| dev->buffer[chn].dwFrames = SYS_FRAMES; |
| |
| /* always allocate maximum size(PAL) for system buffers */ |
| reqsize = SYS_FRAMES_MAXSIZE; |
| |
| if (reqsize > SYS_FRAMES_MAXSIZE) |
| reqsize = SYS_FRAMES_MAXSIZE; |
| |
| for (i = 0; i < SYS_FRAMES; i++) { |
| /* allocate the frames */ |
| dev->buffer[chn].frame[i].lpvbits = vmalloc(reqsize); |
| |
| dprintk(1, "valloc %p chan %lu, idx %lu, pdata %p\n", |
| &dev->buffer[chn].frame[i], chn, i, |
| dev->buffer[chn].frame[i].lpvbits); |
| dev->buffer[chn].frame[i].size = reqsize; |
| if (dev->buffer[chn].frame[i].lpvbits == NULL) { |
| printk(KERN_INFO "out of memory. using less frames\n"); |
| dev->buffer[chn].dwFrames = i; |
| break; |
| } |
| } |
| |
| /* make sure internal states are set */ |
| for (i = 0; i < SYS_FRAMES; i++) { |
| dev->buffer[chn].frame[i].ulState = 0; |
| dev->buffer[chn].frame[i].cur_size = 0; |
| } |
| |
| dev->cur_frame[chn] = 0; |
| dev->last_frame[chn] = -1; |
| return 0; |
| } |
| |
| static int s2255_release_sys_buffers(struct s2255_dev *dev, |
| unsigned long channel) |
| { |
| unsigned long i; |
| dprintk(1, "release sys buffers\n"); |
| for (i = 0; i < SYS_FRAMES; i++) { |
| if (dev->buffer[channel].frame[i].lpvbits) { |
| dprintk(1, "vfree %p\n", |
| dev->buffer[channel].frame[i].lpvbits); |
| vfree(dev->buffer[channel].frame[i].lpvbits); |
| } |
| dev->buffer[channel].frame[i].lpvbits = NULL; |
| } |
| return 0; |
| } |
| |
| static int s2255_board_init(struct s2255_dev *dev) |
| { |
| int j; |
| struct s2255_mode mode_def = DEF_MODEI_NTSC_CONT; |
| int fw_ver; |
| dprintk(4, "board init: %p", dev); |
| |
| for (j = 0; j < MAX_PIPE_BUFFERS; j++) { |
| struct s2255_pipeinfo *pipe = &dev->pipes[j]; |
| |
| memset(pipe, 0, sizeof(*pipe)); |
| pipe->dev = dev; |
| pipe->cur_transfer_size = S2255_USB_XFER_SIZE; |
| pipe->max_transfer_size = S2255_USB_XFER_SIZE; |
| |
| pipe->transfer_buffer = kzalloc(pipe->max_transfer_size, |
| GFP_KERNEL); |
| if (pipe->transfer_buffer == NULL) { |
| dprintk(1, "out of memory!\n"); |
| return -ENOMEM; |
| } |
| |
| } |
| |
| /* query the firmware */ |
| fw_ver = s2255_get_fx2fw(dev); |
| |
| printk(KERN_INFO "2255 usb firmware version %d.%d\n", |
| (fw_ver >> 8) & 0xff, |
| fw_ver & 0xff); |
| |
| if (fw_ver < S2255_CUR_USB_FWVER) |
| dev_err(&dev->udev->dev, |
| "usb firmware not up to date %d.%d\n", |
| (fw_ver >> 8) & 0xff, |
| fw_ver & 0xff); |
| |
| for (j = 0; j < MAX_CHANNELS; j++) { |
| dev->b_acquire[j] = 0; |
| dev->mode[j] = mode_def; |
| dev->jc[j].quality = S2255_DEF_JPEG_QUAL; |
| dev->cur_fmt[j] = &formats[0]; |
| dev->mode[j].restart = 1; |
| dev->req_image_size[j] = get_transfer_size(&mode_def); |
| dev->frame_count[j] = 0; |
| /* create the system buffers */ |
| s2255_create_sys_buffers(dev, j); |
| } |
| /* start read pipe */ |
| s2255_start_readpipe(dev); |
| |
| dprintk(1, "S2255: board initialized\n"); |
| return 0; |
| } |
| |
| static int s2255_board_shutdown(struct s2255_dev *dev) |
| { |
| u32 i; |
| |
| dprintk(1, "S2255: board shutdown: %p", dev); |
| |
| for (i = 0; i < MAX_CHANNELS; i++) { |
| if (dev->b_acquire[i]) |
| s2255_stop_acquire(dev, i); |
| } |
| |
| s2255_stop_readpipe(dev); |
| |
| for (i = 0; i < MAX_CHANNELS; i++) |
| s2255_release_sys_buffers(dev, i); |
| |
| /* release transfer buffers */ |
| for (i = 0; i < MAX_PIPE_BUFFERS; i++) { |
| struct s2255_pipeinfo *pipe = &dev->pipes[i]; |
| kfree(pipe->transfer_buffer); |
| } |
| return 0; |
| } |
| |
| static void read_pipe_completion(struct urb *purb) |
| { |
| struct s2255_pipeinfo *pipe_info; |
| struct s2255_dev *dev; |
| int status; |
| int pipe; |
| |
| pipe_info = purb->context; |
| dprintk(100, "read pipe completion %p, status %d\n", purb, |
| purb->status); |
| if (pipe_info == NULL) { |
| dev_err(&purb->dev->dev, "no context!\n"); |
| return; |
| } |
| |
| dev = pipe_info->dev; |
| if (dev == NULL) { |
| dev_err(&purb->dev->dev, "no context!\n"); |
| return; |
| } |
| status = purb->status; |
| /* if shutting down, do not resubmit, exit immediately */ |
| if (status == -ESHUTDOWN) { |
| dprintk(2, "read_pipe_completion: err shutdown\n"); |
| pipe_info->err_count++; |
| return; |
| } |
| |
| if (pipe_info->state == 0) { |
| dprintk(2, "exiting USB pipe"); |
| return; |
| } |
| |
| if (status == 0) |
| s2255_read_video_callback(dev, pipe_info); |
| else { |
| pipe_info->err_count++; |
| dprintk(1, "s2255drv: failed URB %d\n", status); |
| } |
| |
| pipe = usb_rcvbulkpipe(dev->udev, dev->read_endpoint); |
| /* reuse urb */ |
| usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev, |
| pipe, |
| pipe_info->transfer_buffer, |
| pipe_info->cur_transfer_size, |
| read_pipe_completion, pipe_info); |
| |
| if (pipe_info->state != 0) { |
| if (usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL)) { |
| dev_err(&dev->udev->dev, "error submitting urb\n"); |
| } |
| } else { |
| dprintk(2, "read pipe complete state 0\n"); |
| } |
| return; |
| } |
| |
| static int s2255_start_readpipe(struct s2255_dev *dev) |
| { |
| int pipe; |
| int retval; |
| int i; |
| struct s2255_pipeinfo *pipe_info = dev->pipes; |
| pipe = usb_rcvbulkpipe(dev->udev, dev->read_endpoint); |
| dprintk(2, "start pipe IN %d\n", dev->read_endpoint); |
| |
| for (i = 0; i < MAX_PIPE_BUFFERS; i++) { |
| pipe_info->state = 1; |
| pipe_info->err_count = 0; |
| pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!pipe_info->stream_urb) { |
| dev_err(&dev->udev->dev, |
| "ReadStream: Unable to alloc URB\n"); |
| return -ENOMEM; |
| } |
| /* transfer buffer allocated in board_init */ |
| usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev, |
| pipe, |
| pipe_info->transfer_buffer, |
| pipe_info->cur_transfer_size, |
| read_pipe_completion, pipe_info); |
| |
| dprintk(4, "submitting URB %p\n", pipe_info->stream_urb); |
| retval = usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL); |
| if (retval) { |
| printk(KERN_ERR "s2255: start read pipe failed\n"); |
| return retval; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* starts acquisition process */ |
| static int s2255_start_acquire(struct s2255_dev *dev, unsigned long chn) |
| { |
| unsigned char *buffer; |
| int res; |
| unsigned long chn_rev; |
| int j; |
| if (chn >= MAX_CHANNELS) { |
| dprintk(2, "start acquire failed, bad channel %lu\n", chn); |
| return -1; |
| } |
| |
| chn_rev = G_chnmap[chn]; |
| dprintk(1, "S2255: start acquire %lu \n", chn); |
| |
| buffer = kzalloc(512, GFP_KERNEL); |
| if (buffer == NULL) { |
| dev_err(&dev->udev->dev, "out of mem\n"); |
| return -ENOMEM; |
| } |
| |
| dev->last_frame[chn] = -1; |
| dev->bad_payload[chn] = 0; |
| dev->cur_frame[chn] = 0; |
| for (j = 0; j < SYS_FRAMES; j++) { |
| dev->buffer[chn].frame[j].ulState = 0; |
| dev->buffer[chn].frame[j].cur_size = 0; |
| } |
| |
| /* send the start command */ |
| *(u32 *) buffer = IN_DATA_TOKEN; |
| *((u32 *) buffer + 1) = (u32) chn_rev; |
| *((u32 *) buffer + 2) = (u32) CMD_START; |
| res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512); |
| if (res != 0) |
| dev_err(&dev->udev->dev, "CMD_START error\n"); |
| |
| dprintk(2, "start acquire exit[%lu] %d \n", chn, res); |
| kfree(buffer); |
| return 0; |
| } |
| |
| static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn) |
| { |
| unsigned char *buffer; |
| int res; |
| unsigned long chn_rev; |
| |
| if (chn >= MAX_CHANNELS) { |
| dprintk(2, "stop acquire failed, bad channel %lu\n", chn); |
| return -1; |
| } |
| chn_rev = G_chnmap[chn]; |
| |
| buffer = kzalloc(512, GFP_KERNEL); |
| if (buffer == NULL) { |
| dev_err(&dev->udev->dev, "out of mem\n"); |
| return -ENOMEM; |
| } |
| |
| /* send the stop command */ |
| dprintk(4, "stop acquire %lu\n", chn); |
| *(u32 *) buffer = IN_DATA_TOKEN; |
| *((u32 *) buffer + 1) = (u32) chn_rev; |
| *((u32 *) buffer + 2) = CMD_STOP; |
| res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512); |
| |
| if (res != 0) |
| dev_err(&dev->udev->dev, "CMD_STOP error\n"); |
| |
| dprintk(4, "stop acquire: releasing states \n"); |
| |
| kfree(buffer); |
| dev->b_acquire[chn] = 0; |
| |
| return res; |
| } |
| |
| static void s2255_stop_readpipe(struct s2255_dev *dev) |
| { |
| int j; |
| |
| if (dev == NULL) { |
| s2255_dev_err(&dev->udev->dev, "invalid device\n"); |
| return; |
| } |
| dprintk(4, "stop read pipe\n"); |
| for (j = 0; j < MAX_PIPE_BUFFERS; j++) { |
| struct s2255_pipeinfo *pipe_info = &dev->pipes[j]; |
| if (pipe_info) { |
| if (pipe_info->state == 0) |
| continue; |
| pipe_info->state = 0; |
| } |
| } |
| |
| for (j = 0; j < MAX_PIPE_BUFFERS; j++) { |
| struct s2255_pipeinfo *pipe_info = &dev->pipes[j]; |
| if (pipe_info->stream_urb) { |
| /* cancel urb */ |
| usb_kill_urb(pipe_info->stream_urb); |
| usb_free_urb(pipe_info->stream_urb); |
| pipe_info->stream_urb = NULL; |
| } |
| } |
| dprintk(2, "s2255 stop read pipe: %d\n", j); |
| return; |
| } |
| |
| static void s2255_fwload_start(struct s2255_dev *dev, int reset) |
| { |
| if (reset) |
| s2255_reset_dsppower(dev); |
| dev->fw_data->fw_size = dev->fw_data->fw->size; |
| atomic_set(&dev->fw_data->fw_state, S2255_FW_NOTLOADED); |
| memcpy(dev->fw_data->pfw_data, |
| dev->fw_data->fw->data, CHUNK_SIZE); |
| dev->fw_data->fw_loaded = CHUNK_SIZE; |
| usb_fill_bulk_urb(dev->fw_data->fw_urb, dev->udev, |
| usb_sndbulkpipe(dev->udev, 2), |
| dev->fw_data->pfw_data, |
| CHUNK_SIZE, s2255_fwchunk_complete, |
| dev->fw_data); |
| mod_timer(&dev->timer, jiffies + HZ); |
| } |
| |
| /* standard usb probe function */ |
| static int s2255_probe(struct usb_interface *interface, |
| const struct usb_device_id *id) |
| { |
| struct s2255_dev *dev = NULL; |
| struct usb_host_interface *iface_desc; |
| struct usb_endpoint_descriptor *endpoint; |
| int i; |
| int retval = -ENOMEM; |
| __le32 *pdata; |
| int fw_size; |
| |
| dprintk(2, "s2255: probe\n"); |
| |
| /* allocate memory for our device state and initialize it to zero */ |
| dev = kzalloc(sizeof(struct s2255_dev), GFP_KERNEL); |
| if (dev == NULL) { |
| s2255_dev_err(&interface->dev, "out of memory\n"); |
| goto error; |
| } |
| |
| dev->fw_data = kzalloc(sizeof(struct s2255_fw), GFP_KERNEL); |
| if (!dev->fw_data) |
| goto error; |
| |
| mutex_init(&dev->lock); |
| mutex_init(&dev->open_lock); |
| |
| /* grab usb_device and save it */ |
| dev->udev = usb_get_dev(interface_to_usbdev(interface)); |
| if (dev->udev == NULL) { |
| dev_err(&interface->dev, "null usb device\n"); |
| retval = -ENODEV; |
| goto error; |
| } |
| kref_init(&dev->kref); |
| dprintk(1, "dev: %p, kref: %p udev %p interface %p\n", dev, &dev->kref, |
| dev->udev, interface); |
| dev->interface = interface; |
| /* set up the endpoint information */ |
| iface_desc = interface->cur_altsetting; |
| dprintk(1, "num endpoints %d\n", iface_desc->desc.bNumEndpoints); |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { |
| endpoint = &iface_desc->endpoint[i].desc; |
| if (!dev->read_endpoint && usb_endpoint_is_bulk_in(endpoint)) { |
| /* we found the bulk in endpoint */ |
| dev->read_endpoint = endpoint->bEndpointAddress; |
| } |
| } |
| |
| if (!dev->read_endpoint) { |
| dev_err(&interface->dev, "Could not find bulk-in endpoint\n"); |
| goto error; |
| } |
| |
| /* set intfdata */ |
| usb_set_intfdata(interface, dev); |
| |
| dprintk(100, "after intfdata %p\n", dev); |
| |
| init_timer(&dev->timer); |
| dev->timer.function = s2255_timer; |
| dev->timer.data = (unsigned long)dev->fw_data; |
| |
| init_waitqueue_head(&dev->fw_data->wait_fw); |
| for (i = 0; i < MAX_CHANNELS; i++) |
| init_waitqueue_head(&dev->wait_setmode[i]); |
| |
| |
| dev->fw_data->fw_urb = usb_alloc_urb(0, GFP_KERNEL); |
| |
| if (!dev->fw_data->fw_urb) { |
| dev_err(&interface->dev, "out of memory!\n"); |
| goto error; |
| } |
| dev->fw_data->pfw_data = kzalloc(CHUNK_SIZE, GFP_KERNEL); |
| if (!dev->fw_data->pfw_data) { |
| dev_err(&interface->dev, "out of memory!\n"); |
| goto error; |
| } |
| /* load the first chunk */ |
| if (request_firmware(&dev->fw_data->fw, |
| FIRMWARE_FILE_NAME, &dev->udev->dev)) { |
| printk(KERN_ERR "sensoray 2255 failed to get firmware\n"); |
| goto error; |
| } |
| /* check the firmware is valid */ |
| fw_size = dev->fw_data->fw->size; |
| pdata = (__le32 *) &dev->fw_data->fw->data[fw_size - 8]; |
| |
| if (*pdata != S2255_FW_MARKER) { |
| printk(KERN_INFO "Firmware invalid.\n"); |
| retval = -ENODEV; |
| goto error; |
| } else { |
| /* make sure firmware is the latest */ |
| __le32 *pRel; |
| pRel = (__le32 *) &dev->fw_data->fw->data[fw_size - 4]; |
| printk(KERN_INFO "s2255 dsp fw version %x\n", *pRel); |
| } |
| /* loads v4l specific */ |
| s2255_probe_v4l(dev); |
| usb_reset_device(dev->udev); |
| /* load 2255 board specific */ |
| retval = s2255_board_init(dev); |
| if (retval) |
| goto error; |
| |
| dprintk(4, "before probe done %p\n", dev); |
| spin_lock_init(&dev->slock); |
| |
| s2255_fwload_start(dev, 0); |
| dev_info(&interface->dev, "Sensoray 2255 detected\n"); |
| return 0; |
| error: |
| return retval; |
| } |
| |
| /* disconnect routine. when board is removed physically or with rmmod */ |
| static void s2255_disconnect(struct usb_interface *interface) |
| { |
| struct s2255_dev *dev = NULL; |
| int i; |
| dprintk(1, "s2255: disconnect interface %p\n", interface); |
| dev = usb_get_intfdata(interface); |
| |
| /* |
| * wake up any of the timers to allow open_lock to be |
| * acquired sooner |
| */ |
| atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING); |
| wake_up(&dev->fw_data->wait_fw); |
| for (i = 0; i < MAX_CHANNELS; i++) { |
| dev->setmode_ready[i] = 1; |
| wake_up(&dev->wait_setmode[i]); |
| } |
| |
| mutex_lock(&dev->open_lock); |
| usb_set_intfdata(interface, NULL); |
| mutex_unlock(&dev->open_lock); |
| |
| if (dev) { |
| kref_put(&dev->kref, s2255_destroy); |
| dprintk(1, "s2255drv: disconnect\n"); |
| dev_info(&interface->dev, "s2255usb now disconnected\n"); |
| } |
| } |
| |
| static struct usb_driver s2255_driver = { |
| .name = S2255_DRIVER_NAME, |
| .probe = s2255_probe, |
| .disconnect = s2255_disconnect, |
| .id_table = s2255_table, |
| }; |
| |
| static int __init usb_s2255_init(void) |
| { |
| int result; |
| |
| /* register this driver with the USB subsystem */ |
| result = usb_register(&s2255_driver); |
| |
| if (result) |
| pr_err(KBUILD_MODNAME |
| ": usb_register failed. Error number %d\n", result); |
| |
| dprintk(2, "s2255_init: done\n"); |
| return result; |
| } |
| |
| static void __exit usb_s2255_exit(void) |
| { |
| usb_deregister(&s2255_driver); |
| } |
| |
| module_init(usb_s2255_init); |
| module_exit(usb_s2255_exit); |
| |
| MODULE_DESCRIPTION("Sensoray 2255 Video for Linux driver"); |
| MODULE_AUTHOR("Dean Anderson (Sensoray Company Inc.)"); |
| MODULE_LICENSE("GPL"); |