| /* |
| * arch/arm/mach-h720x/include/mach/hardware.h |
| * |
| * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. |
| * (C) 2003 Thomas Gleixner <tglx@linutronix.de> |
| * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> |
| * |
| * This file contains the hardware definitions of the h720x processors |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Do not add implementations specific defines here. This files contains |
| * only defines of the onchip peripherals. Add those defines to boards.h, |
| * which is included by this file. |
| */ |
| |
| #ifndef __ASM_ARCH_HARDWARE_H |
| #define __ASM_ARCH_HARDWARE_H |
| |
| #define IOCLK (3686400L) |
| |
| /* Onchip peripherals */ |
| |
| #define IO_VIRT 0xf0000000 /* IO peripherals */ |
| #define IO_PHYS 0x80000000 |
| #define IO_SIZE 0x00050000 |
| |
| #ifdef CONFIG_CPU_H7202 |
| #include "h7202-regs.h" |
| #elif defined CONFIG_CPU_H7201 |
| #include "h7201-regs.h" |
| #else |
| #error machine definition mismatch |
| #endif |
| |
| /* Macro to access the CPU IO */ |
| #define CPU_IO(x) (*(volatile u32*)(x)) |
| |
| /* Macro to access general purpose regs (base, offset) */ |
| #define CPU_REG(x,y) CPU_IO(x+y) |
| |
| /* Macro to access irq related regs */ |
| #define IRQ_REG(x) CPU_REG(IRQC_VIRT,x) |
| |
| /* CPU registers */ |
| /* general purpose I/O */ |
| #define GPIO_VIRT(x) (IO_VIRT + 0x23000 + ((x)<<5)) |
| #define GPIO_A_VIRT (GPIO_VIRT(0)) |
| #define GPIO_B_VIRT (GPIO_VIRT(1)) |
| #define GPIO_C_VIRT (GPIO_VIRT(2)) |
| #define GPIO_D_VIRT (GPIO_VIRT(3)) |
| #define GPIO_E_VIRT (GPIO_VIRT(4)) |
| #define GPIO_AMULSEL (GPIO_VIRT(0) + 0xA4) |
| |
| #define AMULSEL_USIN2 (1<<5) |
| #define AMULSEL_USOUT2 (1<<6) |
| #define AMULSEL_USIN3 (1<<13) |
| #define AMULSEL_USOUT3 (1<<14) |
| #define AMULSEL_IRDIN (1<<15) |
| #define AMULSEL_IRDOUT (1<<7) |
| |
| /* Register offsets general purpose I/O */ |
| #define GPIO_DATA 0x00 |
| #define GPIO_DIR 0x04 |
| #define GPIO_MASK 0x08 |
| #define GPIO_STAT 0x0C |
| #define GPIO_EDGE 0x10 |
| #define GPIO_CLR 0x14 |
| #define GPIO_POL 0x18 |
| #define GPIO_EN 0x1C |
| |
| /*interrupt controller */ |
| #define IRQC_VIRT (IO_VIRT + 0x24000) |
| /* register offset interrupt controller */ |
| #define IRQC_IER 0x00 |
| #define IRQC_ISR 0x04 |
| |
| /* timer unit */ |
| #define TIMER_VIRT (IO_VIRT + 0x25000) |
| /* Register offsets timer unit */ |
| #define TM0_PERIOD 0x00 |
| #define TM0_COUNT 0x08 |
| #define TM0_CTRL 0x10 |
| #define TM1_PERIOD 0x20 |
| #define TM1_COUNT 0x28 |
| #define TM1_CTRL 0x30 |
| #define TM2_PERIOD 0x40 |
| #define TM2_COUNT 0x48 |
| #define TM2_CTRL 0x50 |
| #define TIMER_TOPCTRL 0x60 |
| #define TIMER_TOPSTAT 0x64 |
| #define T64_COUNTL 0x80 |
| #define T64_COUNTH 0x84 |
| #define T64_CTRL 0x88 |
| #define T64_BASEL 0x94 |
| #define T64_BASEH 0x98 |
| /* Bitmaks timer unit TOPSTAT reg */ |
| #define TSTAT_T0INT 0x1 |
| #define TSTAT_T1INT 0x2 |
| #define TSTAT_T2INT 0x4 |
| #define TSTAT_T3INT 0x8 |
| /* Bit description of TMx_CTRL register */ |
| #define TM_START 0x1 |
| #define TM_REPEAT 0x2 |
| #define TM_RESET 0x4 |
| /* Bit description of TIMER_CTRL register */ |
| #define ENABLE_TM0_INTR 0x1 |
| #define ENABLE_TM1_INTR 0x2 |
| #define ENABLE_TM2_INTR 0x4 |
| #define TIMER_ENABLE_BIT 0x8 |
| #define ENABLE_TIMER64 0x10 |
| #define ENABLE_TIMER64_INT 0x20 |
| |
| /* PMU & PLL */ |
| #define PMU_BASE (IO_VIRT + 0x1000) |
| #define PMU_MODE 0x00 |
| #define PMU_STAT 0x20 |
| #define PMU_PLL_CTRL 0x28 |
| |
| /* PMU Mode bits */ |
| #define PMU_MODE_SLOW 0x00 |
| #define PMU_MODE_RUN 0x01 |
| #define PMU_MODE_IDLE 0x02 |
| #define PMU_MODE_SLEEP 0x03 |
| #define PMU_MODE_INIT 0x04 |
| #define PMU_MODE_DEEPSLEEP 0x07 |
| #define PMU_MODE_WAKEUP 0x08 |
| |
| /* PMU ... */ |
| #define PLL_2_EN 0x8000 |
| #define PLL_1_EN 0x4000 |
| #define PLL_3_MUTE 0x0080 |
| |
| /* Control bits for PMU/ PLL */ |
| #define PMU_WARMRESET 0x00010000 |
| #define PLL_CTRL_MASK23 0x000080ff |
| |
| /* LCD Controller */ |
| #define LCD_BASE (IO_VIRT + 0x10000) |
| #define LCD_CTRL 0x00 |
| #define LCD_STATUS 0x04 |
| #define LCD_STATUS_M 0x08 |
| #define LCD_INTERRUPT 0x0C |
| #define LCD_DBAR 0x10 |
| #define LCD_DCAR 0x14 |
| #define LCD_TIMING0 0x20 |
| #define LCD_TIMING1 0x24 |
| #define LCD_TIMING2 0x28 |
| #define LCD_TEST 0x40 |
| |
| /* LCD Control Bits */ |
| #define LCD_CTRL_LCD_ENABLE 0x00000001 |
| /* Bits per pixel */ |
| #define LCD_CTRL_LCD_BPP_MASK 0x00000006 |
| #define LCD_CTRL_LCD_4BPP 0x00000000 |
| #define LCD_CTRL_LCD_8BPP 0x00000002 |
| #define LCD_CTRL_LCD_16BPP 0x00000004 |
| #define LCD_CTRL_LCD_BW 0x00000008 |
| #define LCD_CTRL_LCD_TFT 0x00000010 |
| #define LCD_CTRL_BGR 0x00001000 |
| #define LCD_CTRL_LCD_VCOMP 0x00080000 |
| #define LCD_CTRL_LCD_MONO8 0x00200000 |
| #define LCD_CTRL_LCD_PWR 0x00400000 |
| #define LCD_CTRL_LCD_BLE 0x00800000 |
| #define LCD_CTRL_LDBUSEN 0x01000000 |
| |
| /* Palette */ |
| #define LCD_PALETTE_BASE (IO_VIRT + 0x10400) |
| |
| /* Serial ports */ |
| #define SERIAL0_OFS 0x20000 |
| #define SERIAL0_VIRT (IO_VIRT + SERIAL0_OFS) |
| #define SERIAL0_BASE (IO_PHYS + SERIAL0_OFS) |
| |
| #define SERIAL1_OFS 0x21000 |
| #define SERIAL1_VIRT (IO_VIRT + SERIAL1_OFS) |
| #define SERIAL1_BASE (IO_PHYS + SERIAL1_OFS) |
| |
| #define SERIAL_ENABLE 0x30 |
| #define SERIAL_ENABLE_EN (1<<0) |
| |
| /* General defines to pacify gcc */ |
| #define PCIO_BASE (0) /* for inb, outb and friends */ |
| #define PCIO_VIRT PCIO_BASE |
| |
| #define __ASM_ARCH_HARDWARE_INCMACH_H |
| #include "boards.h" |
| #undef __ASM_ARCH_HARDWARE_INCMACH_H |
| |
| #endif /* __ASM_ARCH_HARDWARE_H */ |
