| /** |
| * This file contains the handling of command. |
| * It prepares command and sends it to firmware when it is ready. |
| */ |
| |
| #include <net/iw_handler.h> |
| #include <net/lib80211.h> |
| #include <linux/kfifo.h> |
| #include <linux/sched.h> |
| #include "host.h" |
| #include "hostcmd.h" |
| #include "decl.h" |
| #include "defs.h" |
| #include "dev.h" |
| #include "assoc.h" |
| #include "wext.h" |
| #include "cmd.h" |
| |
| static struct cmd_ctrl_node *lbs_get_cmd_ctrl_node(struct lbs_private *priv); |
| |
| |
| /** |
| * @brief Simple callback that copies response back into command |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param extra A pointer to the original command structure for which |
| * 'resp' is a response |
| * @param resp A pointer to the command response |
| * |
| * @return 0 on success, error on failure |
| */ |
| int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra, |
| struct cmd_header *resp) |
| { |
| struct cmd_header *buf = (void *)extra; |
| uint16_t copy_len; |
| |
| copy_len = min(le16_to_cpu(buf->size), le16_to_cpu(resp->size)); |
| memcpy(buf, resp, copy_len); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(lbs_cmd_copyback); |
| |
| /** |
| * @brief Simple callback that ignores the result. Use this if |
| * you just want to send a command to the hardware, but don't |
| * care for the result. |
| * |
| * @param priv ignored |
| * @param extra ignored |
| * @param resp ignored |
| * |
| * @return 0 for success |
| */ |
| static int lbs_cmd_async_callback(struct lbs_private *priv, unsigned long extra, |
| struct cmd_header *resp) |
| { |
| return 0; |
| } |
| |
| |
| /** |
| * @brief Checks whether a command is allowed in Power Save mode |
| * |
| * @param command the command ID |
| * @return 1 if allowed, 0 if not allowed |
| */ |
| static u8 is_command_allowed_in_ps(u16 cmd) |
| { |
| switch (cmd) { |
| case CMD_802_11_RSSI: |
| return 1; |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| /** |
| * @brief Updates the hardware details like MAC address and regulatory region |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * |
| * @return 0 on success, error on failure |
| */ |
| int lbs_update_hw_spec(struct lbs_private *priv) |
| { |
| struct cmd_ds_get_hw_spec cmd; |
| int ret = -1; |
| u32 i; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| memcpy(cmd.permanentaddr, priv->current_addr, ETH_ALEN); |
| ret = lbs_cmd_with_response(priv, CMD_GET_HW_SPEC, &cmd); |
| if (ret) |
| goto out; |
| |
| priv->fwcapinfo = le32_to_cpu(cmd.fwcapinfo); |
| |
| /* The firmware release is in an interesting format: the patch |
| * level is in the most significant nibble ... so fix that: */ |
| priv->fwrelease = le32_to_cpu(cmd.fwrelease); |
| priv->fwrelease = (priv->fwrelease << 8) | |
| (priv->fwrelease >> 24 & 0xff); |
| |
| /* Some firmware capabilities: |
| * CF card firmware 5.0.16p0: cap 0x00000303 |
| * USB dongle firmware 5.110.17p2: cap 0x00000303 |
| */ |
| lbs_pr_info("%pM, fw %u.%u.%up%u, cap 0x%08x\n", |
| cmd.permanentaddr, |
| priv->fwrelease >> 24 & 0xff, |
| priv->fwrelease >> 16 & 0xff, |
| priv->fwrelease >> 8 & 0xff, |
| priv->fwrelease & 0xff, |
| priv->fwcapinfo); |
| lbs_deb_cmd("GET_HW_SPEC: hardware interface 0x%x, hardware spec 0x%04x\n", |
| cmd.hwifversion, cmd.version); |
| |
| /* Determine mesh_fw_ver from fwrelease and fwcapinfo */ |
| /* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */ |
| /* 5.110.22 have mesh command with 0xa3 command id */ |
| /* 10.0.0.p0 FW brings in mesh config command with different id */ |
| /* Check FW version MSB and initialize mesh_fw_ver */ |
| if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5) |
| priv->mesh_fw_ver = MESH_FW_OLD; |
| else if ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) && |
| (priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK)) |
| priv->mesh_fw_ver = MESH_FW_NEW; |
| else |
| priv->mesh_fw_ver = MESH_NONE; |
| |
| /* Clamp region code to 8-bit since FW spec indicates that it should |
| * only ever be 8-bit, even though the field size is 16-bit. Some firmware |
| * returns non-zero high 8 bits here. |
| * |
| * Firmware version 4.0.102 used in CF8381 has region code shifted. We |
| * need to check for this problem and handle it properly. |
| */ |
| if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V4) |
| priv->regioncode = (le16_to_cpu(cmd.regioncode) >> 8) & 0xFF; |
| else |
| priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF; |
| |
| for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) { |
| /* use the region code to search for the index */ |
| if (priv->regioncode == lbs_region_code_to_index[i]) |
| break; |
| } |
| |
| /* if it's unidentified region code, use the default (USA) */ |
| if (i >= MRVDRV_MAX_REGION_CODE) { |
| priv->regioncode = 0x10; |
| lbs_pr_info("unidentified region code; using the default (USA)\n"); |
| } |
| |
| if (priv->current_addr[0] == 0xff) |
| memmove(priv->current_addr, cmd.permanentaddr, ETH_ALEN); |
| |
| memcpy(priv->dev->dev_addr, priv->current_addr, ETH_ALEN); |
| if (priv->mesh_dev) |
| memcpy(priv->mesh_dev->dev_addr, priv->current_addr, ETH_ALEN); |
| |
| if (lbs_set_regiontable(priv, priv->regioncode, 0)) { |
| ret = -1; |
| goto out; |
| } |
| |
| if (lbs_set_universaltable(priv, 0)) { |
| ret = -1; |
| goto out; |
| } |
| |
| out: |
| lbs_deb_leave(LBS_DEB_CMD); |
| return ret; |
| } |
| |
| int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria, |
| struct wol_config *p_wol_config) |
| { |
| struct cmd_ds_host_sleep cmd_config; |
| int ret; |
| |
| cmd_config.hdr.size = cpu_to_le16(sizeof(cmd_config)); |
| cmd_config.criteria = cpu_to_le32(criteria); |
| cmd_config.gpio = priv->wol_gpio; |
| cmd_config.gap = priv->wol_gap; |
| |
| if (p_wol_config != NULL) |
| memcpy((uint8_t *)&cmd_config.wol_conf, (uint8_t *)p_wol_config, |
| sizeof(struct wol_config)); |
| else |
| cmd_config.wol_conf.action = CMD_ACT_ACTION_NONE; |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_HOST_SLEEP_CFG, &cmd_config); |
| if (!ret) { |
| if (criteria) { |
| lbs_deb_cmd("Set WOL criteria to %x\n", criteria); |
| priv->wol_criteria = criteria; |
| } else |
| memcpy((uint8_t *) p_wol_config, |
| (uint8_t *)&cmd_config.wol_conf, |
| sizeof(struct wol_config)); |
| } else { |
| lbs_pr_info("HOST_SLEEP_CFG failed %d\n", ret); |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(lbs_host_sleep_cfg); |
| |
| static int lbs_cmd_802_11_ps_mode(struct cmd_ds_command *cmd, |
| u16 cmd_action) |
| { |
| struct cmd_ds_802_11_ps_mode *psm = &cmd->params.psmode; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| cmd->command = cpu_to_le16(CMD_802_11_PS_MODE); |
| cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_ps_mode) + |
| S_DS_GEN); |
| psm->action = cpu_to_le16(cmd_action); |
| psm->multipledtim = 0; |
| switch (cmd_action) { |
| case CMD_SUBCMD_ENTER_PS: |
| lbs_deb_cmd("PS command:" "SubCode- Enter PS\n"); |
| |
| psm->locallisteninterval = 0; |
| psm->nullpktinterval = 0; |
| psm->multipledtim = |
| cpu_to_le16(MRVDRV_DEFAULT_MULTIPLE_DTIM); |
| break; |
| |
| case CMD_SUBCMD_EXIT_PS: |
| lbs_deb_cmd("PS command:" "SubCode- Exit PS\n"); |
| break; |
| |
| case CMD_SUBCMD_SLEEP_CONFIRMED: |
| lbs_deb_cmd("PS command: SubCode- sleep confirm\n"); |
| break; |
| |
| default: |
| break; |
| } |
| |
| lbs_deb_leave(LBS_DEB_CMD); |
| return 0; |
| } |
| |
| int lbs_cmd_802_11_inactivity_timeout(struct lbs_private *priv, |
| uint16_t cmd_action, uint16_t *timeout) |
| { |
| struct cmd_ds_802_11_inactivity_timeout cmd; |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| cmd.hdr.command = cpu_to_le16(CMD_802_11_INACTIVITY_TIMEOUT); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| |
| cmd.action = cpu_to_le16(cmd_action); |
| |
| if (cmd_action == CMD_ACT_SET) |
| cmd.timeout = cpu_to_le16(*timeout); |
| else |
| cmd.timeout = 0; |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_INACTIVITY_TIMEOUT, &cmd); |
| |
| if (!ret) |
| *timeout = le16_to_cpu(cmd.timeout); |
| |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); |
| return 0; |
| } |
| |
| int lbs_cmd_802_11_sleep_params(struct lbs_private *priv, uint16_t cmd_action, |
| struct sleep_params *sp) |
| { |
| struct cmd_ds_802_11_sleep_params cmd; |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| if (cmd_action == CMD_ACT_GET) { |
| memset(&cmd, 0, sizeof(cmd)); |
| } else { |
| cmd.error = cpu_to_le16(sp->sp_error); |
| cmd.offset = cpu_to_le16(sp->sp_offset); |
| cmd.stabletime = cpu_to_le16(sp->sp_stabletime); |
| cmd.calcontrol = sp->sp_calcontrol; |
| cmd.externalsleepclk = sp->sp_extsleepclk; |
| cmd.reserved = cpu_to_le16(sp->sp_reserved); |
| } |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| cmd.action = cpu_to_le16(cmd_action); |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_SLEEP_PARAMS, &cmd); |
| |
| if (!ret) { |
| lbs_deb_cmd("error 0x%x, offset 0x%x, stabletime 0x%x, " |
| "calcontrol 0x%x extsleepclk 0x%x\n", |
| le16_to_cpu(cmd.error), le16_to_cpu(cmd.offset), |
| le16_to_cpu(cmd.stabletime), cmd.calcontrol, |
| cmd.externalsleepclk); |
| |
| sp->sp_error = le16_to_cpu(cmd.error); |
| sp->sp_offset = le16_to_cpu(cmd.offset); |
| sp->sp_stabletime = le16_to_cpu(cmd.stabletime); |
| sp->sp_calcontrol = cmd.calcontrol; |
| sp->sp_extsleepclk = cmd.externalsleepclk; |
| sp->sp_reserved = le16_to_cpu(cmd.reserved); |
| } |
| |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); |
| return 0; |
| } |
| |
| int lbs_cmd_802_11_set_wep(struct lbs_private *priv, uint16_t cmd_action, |
| struct assoc_request *assoc) |
| { |
| struct cmd_ds_802_11_set_wep cmd; |
| int ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.hdr.command = cpu_to_le16(CMD_802_11_SET_WEP); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| |
| cmd.action = cpu_to_le16(cmd_action); |
| |
| if (cmd_action == CMD_ACT_ADD) { |
| int i; |
| |
| /* default tx key index */ |
| cmd.keyindex = cpu_to_le16(assoc->wep_tx_keyidx & |
| CMD_WEP_KEY_INDEX_MASK); |
| |
| /* Copy key types and material to host command structure */ |
| for (i = 0; i < 4; i++) { |
| struct enc_key *pkey = &assoc->wep_keys[i]; |
| |
| switch (pkey->len) { |
| case KEY_LEN_WEP_40: |
| cmd.keytype[i] = CMD_TYPE_WEP_40_BIT; |
| memmove(cmd.keymaterial[i], pkey->key, pkey->len); |
| lbs_deb_cmd("SET_WEP: add key %d (40 bit)\n", i); |
| break; |
| case KEY_LEN_WEP_104: |
| cmd.keytype[i] = CMD_TYPE_WEP_104_BIT; |
| memmove(cmd.keymaterial[i], pkey->key, pkey->len); |
| lbs_deb_cmd("SET_WEP: add key %d (104 bit)\n", i); |
| break; |
| case 0: |
| break; |
| default: |
| lbs_deb_cmd("SET_WEP: invalid key %d, length %d\n", |
| i, pkey->len); |
| ret = -1; |
| goto done; |
| break; |
| } |
| } |
| } else if (cmd_action == CMD_ACT_REMOVE) { |
| /* ACT_REMOVE clears _all_ WEP keys */ |
| |
| /* default tx key index */ |
| cmd.keyindex = cpu_to_le16(priv->wep_tx_keyidx & |
| CMD_WEP_KEY_INDEX_MASK); |
| lbs_deb_cmd("SET_WEP: remove key %d\n", priv->wep_tx_keyidx); |
| } |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd); |
| done: |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); |
| return ret; |
| } |
| |
| int lbs_cmd_802_11_enable_rsn(struct lbs_private *priv, uint16_t cmd_action, |
| uint16_t *enable) |
| { |
| struct cmd_ds_802_11_enable_rsn cmd; |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| cmd.action = cpu_to_le16(cmd_action); |
| |
| if (cmd_action == CMD_ACT_GET) |
| cmd.enable = 0; |
| else { |
| if (*enable) |
| cmd.enable = cpu_to_le16(CMD_ENABLE_RSN); |
| else |
| cmd.enable = cpu_to_le16(CMD_DISABLE_RSN); |
| lbs_deb_cmd("ENABLE_RSN: %d\n", *enable); |
| } |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd); |
| if (!ret && cmd_action == CMD_ACT_GET) |
| *enable = le16_to_cpu(cmd.enable); |
| |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); |
| return ret; |
| } |
| |
| static void set_one_wpa_key(struct MrvlIEtype_keyParamSet *keyparam, |
| struct enc_key *key) |
| { |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| if (key->flags & KEY_INFO_WPA_ENABLED) |
| keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_ENABLED); |
| if (key->flags & KEY_INFO_WPA_UNICAST) |
| keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_UNICAST); |
| if (key->flags & KEY_INFO_WPA_MCAST) |
| keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_MCAST); |
| |
| keyparam->type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL); |
| keyparam->keytypeid = cpu_to_le16(key->type); |
| keyparam->keylen = cpu_to_le16(key->len); |
| memcpy(keyparam->key, key->key, key->len); |
| |
| /* Length field doesn't include the {type,length} header */ |
| keyparam->length = cpu_to_le16(sizeof(*keyparam) - 4); |
| lbs_deb_leave(LBS_DEB_CMD); |
| } |
| |
| int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action, |
| struct assoc_request *assoc) |
| { |
| struct cmd_ds_802_11_key_material cmd; |
| int ret = 0; |
| int index = 0; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| cmd.action = cpu_to_le16(cmd_action); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| |
| if (cmd_action == CMD_ACT_GET) { |
| cmd.hdr.size = cpu_to_le16(S_DS_GEN + 2); |
| } else { |
| memset(cmd.keyParamSet, 0, sizeof(cmd.keyParamSet)); |
| |
| if (test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc->flags)) { |
| set_one_wpa_key(&cmd.keyParamSet[index], |
| &assoc->wpa_unicast_key); |
| index++; |
| } |
| |
| if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc->flags)) { |
| set_one_wpa_key(&cmd.keyParamSet[index], |
| &assoc->wpa_mcast_key); |
| index++; |
| } |
| |
| /* The common header and as many keys as we included */ |
| cmd.hdr.size = cpu_to_le16(offsetof(typeof(cmd), |
| keyParamSet[index])); |
| } |
| ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd); |
| /* Copy the returned key to driver private data */ |
| if (!ret && cmd_action == CMD_ACT_GET) { |
| void *buf_ptr = cmd.keyParamSet; |
| void *resp_end = &(&cmd)[1]; |
| |
| while (buf_ptr < resp_end) { |
| struct MrvlIEtype_keyParamSet *keyparam = buf_ptr; |
| struct enc_key *key; |
| uint16_t param_set_len = le16_to_cpu(keyparam->length); |
| uint16_t key_len = le16_to_cpu(keyparam->keylen); |
| uint16_t key_flags = le16_to_cpu(keyparam->keyinfo); |
| uint16_t key_type = le16_to_cpu(keyparam->keytypeid); |
| void *end; |
| |
| end = (void *)keyparam + sizeof(keyparam->type) |
| + sizeof(keyparam->length) + param_set_len; |
| |
| /* Make sure we don't access past the end of the IEs */ |
| if (end > resp_end) |
| break; |
| |
| if (key_flags & KEY_INFO_WPA_UNICAST) |
| key = &priv->wpa_unicast_key; |
| else if (key_flags & KEY_INFO_WPA_MCAST) |
| key = &priv->wpa_mcast_key; |
| else |
| break; |
| |
| /* Copy returned key into driver */ |
| memset(key, 0, sizeof(struct enc_key)); |
| if (key_len > sizeof(key->key)) |
| break; |
| key->type = key_type; |
| key->flags = key_flags; |
| key->len = key_len; |
| memcpy(key->key, keyparam->key, key->len); |
| |
| buf_ptr = end + 1; |
| } |
| } |
| |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief Set an SNMP MIB value |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param oid The OID to set in the firmware |
| * @param val Value to set the OID to |
| * |
| * @return 0 on success, error on failure |
| */ |
| int lbs_set_snmp_mib(struct lbs_private *priv, u32 oid, u16 val) |
| { |
| struct cmd_ds_802_11_snmp_mib cmd; |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| memset(&cmd, 0, sizeof (cmd)); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| cmd.action = cpu_to_le16(CMD_ACT_SET); |
| cmd.oid = cpu_to_le16((u16) oid); |
| |
| switch (oid) { |
| case SNMP_MIB_OID_BSS_TYPE: |
| cmd.bufsize = cpu_to_le16(sizeof(u8)); |
| cmd.value[0] = (val == IW_MODE_ADHOC) ? 2 : 1; |
| break; |
| case SNMP_MIB_OID_11D_ENABLE: |
| case SNMP_MIB_OID_FRAG_THRESHOLD: |
| case SNMP_MIB_OID_RTS_THRESHOLD: |
| case SNMP_MIB_OID_SHORT_RETRY_LIMIT: |
| case SNMP_MIB_OID_LONG_RETRY_LIMIT: |
| cmd.bufsize = cpu_to_le16(sizeof(u16)); |
| *((__le16 *)(&cmd.value)) = cpu_to_le16(val); |
| break; |
| default: |
| lbs_deb_cmd("SNMP_CMD: (set) unhandled OID 0x%x\n", oid); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| lbs_deb_cmd("SNMP_CMD: (set) oid 0x%x, oid size 0x%x, value 0x%x\n", |
| le16_to_cpu(cmd.oid), le16_to_cpu(cmd.bufsize), val); |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_SNMP_MIB, &cmd); |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief Get an SNMP MIB value |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param oid The OID to retrieve from the firmware |
| * @param out_val Location for the returned value |
| * |
| * @return 0 on success, error on failure |
| */ |
| int lbs_get_snmp_mib(struct lbs_private *priv, u32 oid, u16 *out_val) |
| { |
| struct cmd_ds_802_11_snmp_mib cmd; |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| memset(&cmd, 0, sizeof (cmd)); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| cmd.action = cpu_to_le16(CMD_ACT_GET); |
| cmd.oid = cpu_to_le16(oid); |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_SNMP_MIB, &cmd); |
| if (ret) |
| goto out; |
| |
| switch (le16_to_cpu(cmd.bufsize)) { |
| case sizeof(u8): |
| if (oid == SNMP_MIB_OID_BSS_TYPE) { |
| if (cmd.value[0] == 2) |
| *out_val = IW_MODE_ADHOC; |
| else |
| *out_val = IW_MODE_INFRA; |
| } else |
| *out_val = cmd.value[0]; |
| break; |
| case sizeof(u16): |
| *out_val = le16_to_cpu(*((__le16 *)(&cmd.value))); |
| break; |
| default: |
| lbs_deb_cmd("SNMP_CMD: (get) unhandled OID 0x%x size %d\n", |
| oid, le16_to_cpu(cmd.bufsize)); |
| break; |
| } |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief Get the min, max, and current TX power |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param curlevel Current power level in dBm |
| * @param minlevel Minimum supported power level in dBm (optional) |
| * @param maxlevel Maximum supported power level in dBm (optional) |
| * |
| * @return 0 on success, error on failure |
| */ |
| int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel, |
| s16 *maxlevel) |
| { |
| struct cmd_ds_802_11_rf_tx_power cmd; |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| cmd.action = cpu_to_le16(CMD_ACT_GET); |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_RF_TX_POWER, &cmd); |
| if (ret == 0) { |
| *curlevel = le16_to_cpu(cmd.curlevel); |
| if (minlevel) |
| *minlevel = cmd.minlevel; |
| if (maxlevel) |
| *maxlevel = cmd.maxlevel; |
| } |
| |
| lbs_deb_leave(LBS_DEB_CMD); |
| return ret; |
| } |
| |
| /** |
| * @brief Set the TX power |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param dbm The desired power level in dBm |
| * |
| * @return 0 on success, error on failure |
| */ |
| int lbs_set_tx_power(struct lbs_private *priv, s16 dbm) |
| { |
| struct cmd_ds_802_11_rf_tx_power cmd; |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| cmd.action = cpu_to_le16(CMD_ACT_SET); |
| cmd.curlevel = cpu_to_le16(dbm); |
| |
| lbs_deb_cmd("SET_RF_TX_POWER: %d dBm\n", dbm); |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_RF_TX_POWER, &cmd); |
| |
| lbs_deb_leave(LBS_DEB_CMD); |
| return ret; |
| } |
| |
| static int lbs_cmd_802_11_monitor_mode(struct cmd_ds_command *cmd, |
| u16 cmd_action, void *pdata_buf) |
| { |
| struct cmd_ds_802_11_monitor_mode *monitor = &cmd->params.monitor; |
| |
| cmd->command = cpu_to_le16(CMD_802_11_MONITOR_MODE); |
| cmd->size = |
| cpu_to_le16(sizeof(struct cmd_ds_802_11_monitor_mode) + |
| S_DS_GEN); |
| |
| monitor->action = cpu_to_le16(cmd_action); |
| if (cmd_action == CMD_ACT_SET) { |
| monitor->mode = |
| cpu_to_le16((u16) (*(u32 *) pdata_buf)); |
| } |
| |
| return 0; |
| } |
| |
| static __le16 lbs_rate_to_fw_bitmap(int rate, int lower_rates_ok) |
| { |
| /* Bit Rate |
| * 15:13 Reserved |
| * 12 54 Mbps |
| * 11 48 Mbps |
| * 10 36 Mbps |
| * 9 24 Mbps |
| * 8 18 Mbps |
| * 7 12 Mbps |
| * 6 9 Mbps |
| * 5 6 Mbps |
| * 4 Reserved |
| * 3 11 Mbps |
| * 2 5.5 Mbps |
| * 1 2 Mbps |
| * 0 1 Mbps |
| **/ |
| |
| uint16_t ratemask; |
| int i = lbs_data_rate_to_fw_index(rate); |
| if (lower_rates_ok) |
| ratemask = (0x1fef >> (12 - i)); |
| else |
| ratemask = (1 << i); |
| return cpu_to_le16(ratemask); |
| } |
| |
| int lbs_cmd_802_11_rate_adapt_rateset(struct lbs_private *priv, |
| uint16_t cmd_action) |
| { |
| struct cmd_ds_802_11_rate_adapt_rateset cmd; |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| if (!priv->cur_rate && !priv->enablehwauto) |
| return -EINVAL; |
| |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| |
| cmd.action = cpu_to_le16(cmd_action); |
| cmd.enablehwauto = cpu_to_le16(priv->enablehwauto); |
| cmd.bitmap = lbs_rate_to_fw_bitmap(priv->cur_rate, priv->enablehwauto); |
| ret = lbs_cmd_with_response(priv, CMD_802_11_RATE_ADAPT_RATESET, &cmd); |
| if (!ret && cmd_action == CMD_ACT_GET) { |
| priv->ratebitmap = le16_to_cpu(cmd.bitmap); |
| priv->enablehwauto = le16_to_cpu(cmd.enablehwauto); |
| } |
| |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(lbs_cmd_802_11_rate_adapt_rateset); |
| |
| /** |
| * @brief Set the data rate |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param rate The desired data rate, or 0 to clear a locked rate |
| * |
| * @return 0 on success, error on failure |
| */ |
| int lbs_set_data_rate(struct lbs_private *priv, u8 rate) |
| { |
| struct cmd_ds_802_11_data_rate cmd; |
| int ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| |
| if (rate > 0) { |
| cmd.action = cpu_to_le16(CMD_ACT_SET_TX_FIX_RATE); |
| cmd.rates[0] = lbs_data_rate_to_fw_index(rate); |
| if (cmd.rates[0] == 0) { |
| lbs_deb_cmd("DATA_RATE: invalid requested rate of" |
| " 0x%02X\n", rate); |
| ret = 0; |
| goto out; |
| } |
| lbs_deb_cmd("DATA_RATE: set fixed 0x%02X\n", cmd.rates[0]); |
| } else { |
| cmd.action = cpu_to_le16(CMD_ACT_SET_TX_AUTO); |
| lbs_deb_cmd("DATA_RATE: setting auto\n"); |
| } |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_DATA_RATE, &cmd); |
| if (ret) |
| goto out; |
| |
| lbs_deb_hex(LBS_DEB_CMD, "DATA_RATE_RESP", (u8 *) &cmd, sizeof (cmd)); |
| |
| /* FIXME: get actual rates FW can do if this command actually returns |
| * all data rates supported. |
| */ |
| priv->cur_rate = lbs_fw_index_to_data_rate(cmd.rates[0]); |
| lbs_deb_cmd("DATA_RATE: current rate is 0x%02x\n", priv->cur_rate); |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief Get the radio channel |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * |
| * @return The channel on success, error on failure |
| */ |
| int lbs_get_channel(struct lbs_private *priv) |
| { |
| struct cmd_ds_802_11_rf_channel cmd; |
| int ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| cmd.action = cpu_to_le16(CMD_OPT_802_11_RF_CHANNEL_GET); |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_RF_CHANNEL, &cmd); |
| if (ret) |
| goto out; |
| |
| ret = le16_to_cpu(cmd.channel); |
| lbs_deb_cmd("current radio channel is %d\n", ret); |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); |
| return ret; |
| } |
| |
| int lbs_update_channel(struct lbs_private *priv) |
| { |
| int ret; |
| |
| /* the channel in f/w could be out of sync; get the current channel */ |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| ret = lbs_get_channel(priv); |
| if (ret > 0) { |
| priv->curbssparams.channel = ret; |
| ret = 0; |
| } |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief Set the radio channel |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param channel The desired channel, or 0 to clear a locked channel |
| * |
| * @return 0 on success, error on failure |
| */ |
| int lbs_set_channel(struct lbs_private *priv, u8 channel) |
| { |
| struct cmd_ds_802_11_rf_channel cmd; |
| #ifdef DEBUG |
| u8 old_channel = priv->curbssparams.channel; |
| #endif |
| int ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| cmd.action = cpu_to_le16(CMD_OPT_802_11_RF_CHANNEL_SET); |
| cmd.channel = cpu_to_le16(channel); |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_RF_CHANNEL, &cmd); |
| if (ret) |
| goto out; |
| |
| priv->curbssparams.channel = (uint8_t) le16_to_cpu(cmd.channel); |
| lbs_deb_cmd("channel switch from %d to %d\n", old_channel, |
| priv->curbssparams.channel); |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); |
| return ret; |
| } |
| |
| static int lbs_cmd_802_11_rssi(struct lbs_private *priv, |
| struct cmd_ds_command *cmd) |
| { |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| cmd->command = cpu_to_le16(CMD_802_11_RSSI); |
| cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_rssi) + S_DS_GEN); |
| cmd->params.rssi.N = cpu_to_le16(DEFAULT_BCN_AVG_FACTOR); |
| |
| /* reset Beacon SNR/NF/RSSI values */ |
| priv->SNR[TYPE_BEACON][TYPE_NOAVG] = 0; |
| priv->SNR[TYPE_BEACON][TYPE_AVG] = 0; |
| priv->NF[TYPE_BEACON][TYPE_NOAVG] = 0; |
| priv->NF[TYPE_BEACON][TYPE_AVG] = 0; |
| priv->RSSI[TYPE_BEACON][TYPE_NOAVG] = 0; |
| priv->RSSI[TYPE_BEACON][TYPE_AVG] = 0; |
| |
| lbs_deb_leave(LBS_DEB_CMD); |
| return 0; |
| } |
| |
| static int lbs_cmd_reg_access(struct cmd_ds_command *cmdptr, |
| u8 cmd_action, void *pdata_buf) |
| { |
| struct lbs_offset_value *offval; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| offval = (struct lbs_offset_value *)pdata_buf; |
| |
| switch (le16_to_cpu(cmdptr->command)) { |
| case CMD_MAC_REG_ACCESS: |
| { |
| struct cmd_ds_mac_reg_access *macreg; |
| |
| cmdptr->size = |
| cpu_to_le16(sizeof (struct cmd_ds_mac_reg_access) |
| + S_DS_GEN); |
| macreg = |
| (struct cmd_ds_mac_reg_access *)&cmdptr->params. |
| macreg; |
| |
| macreg->action = cpu_to_le16(cmd_action); |
| macreg->offset = cpu_to_le16((u16) offval->offset); |
| macreg->value = cpu_to_le32(offval->value); |
| |
| break; |
| } |
| |
| case CMD_BBP_REG_ACCESS: |
| { |
| struct cmd_ds_bbp_reg_access *bbpreg; |
| |
| cmdptr->size = |
| cpu_to_le16(sizeof |
| (struct cmd_ds_bbp_reg_access) |
| + S_DS_GEN); |
| bbpreg = |
| (struct cmd_ds_bbp_reg_access *)&cmdptr->params. |
| bbpreg; |
| |
| bbpreg->action = cpu_to_le16(cmd_action); |
| bbpreg->offset = cpu_to_le16((u16) offval->offset); |
| bbpreg->value = (u8) offval->value; |
| |
| break; |
| } |
| |
| case CMD_RF_REG_ACCESS: |
| { |
| struct cmd_ds_rf_reg_access *rfreg; |
| |
| cmdptr->size = |
| cpu_to_le16(sizeof |
| (struct cmd_ds_rf_reg_access) + |
| S_DS_GEN); |
| rfreg = |
| (struct cmd_ds_rf_reg_access *)&cmdptr->params. |
| rfreg; |
| |
| rfreg->action = cpu_to_le16(cmd_action); |
| rfreg->offset = cpu_to_le16((u16) offval->offset); |
| rfreg->value = (u8) offval->value; |
| |
| break; |
| } |
| |
| default: |
| break; |
| } |
| |
| lbs_deb_leave(LBS_DEB_CMD); |
| return 0; |
| } |
| |
| static int lbs_cmd_bt_access(struct cmd_ds_command *cmd, |
| u16 cmd_action, void *pdata_buf) |
| { |
| struct cmd_ds_bt_access *bt_access = &cmd->params.bt; |
| lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action); |
| |
| cmd->command = cpu_to_le16(CMD_BT_ACCESS); |
| cmd->size = cpu_to_le16(sizeof(struct cmd_ds_bt_access) + S_DS_GEN); |
| cmd->result = 0; |
| bt_access->action = cpu_to_le16(cmd_action); |
| |
| switch (cmd_action) { |
| case CMD_ACT_BT_ACCESS_ADD: |
| memcpy(bt_access->addr1, pdata_buf, 2 * ETH_ALEN); |
| lbs_deb_hex(LBS_DEB_MESH, "BT_ADD: blinded MAC addr", bt_access->addr1, 6); |
| break; |
| case CMD_ACT_BT_ACCESS_DEL: |
| memcpy(bt_access->addr1, pdata_buf, 1 * ETH_ALEN); |
| lbs_deb_hex(LBS_DEB_MESH, "BT_DEL: blinded MAC addr", bt_access->addr1, 6); |
| break; |
| case CMD_ACT_BT_ACCESS_LIST: |
| bt_access->id = cpu_to_le32(*(u32 *) pdata_buf); |
| break; |
| case CMD_ACT_BT_ACCESS_RESET: |
| break; |
| case CMD_ACT_BT_ACCESS_SET_INVERT: |
| bt_access->id = cpu_to_le32(*(u32 *) pdata_buf); |
| break; |
| case CMD_ACT_BT_ACCESS_GET_INVERT: |
| break; |
| default: |
| break; |
| } |
| lbs_deb_leave(LBS_DEB_CMD); |
| return 0; |
| } |
| |
| static int lbs_cmd_fwt_access(struct cmd_ds_command *cmd, |
| u16 cmd_action, void *pdata_buf) |
| { |
| struct cmd_ds_fwt_access *fwt_access = &cmd->params.fwt; |
| lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action); |
| |
| cmd->command = cpu_to_le16(CMD_FWT_ACCESS); |
| cmd->size = cpu_to_le16(sizeof(struct cmd_ds_fwt_access) + S_DS_GEN); |
| cmd->result = 0; |
| |
| if (pdata_buf) |
| memcpy(fwt_access, pdata_buf, sizeof(*fwt_access)); |
| else |
| memset(fwt_access, 0, sizeof(*fwt_access)); |
| |
| fwt_access->action = cpu_to_le16(cmd_action); |
| |
| lbs_deb_leave(LBS_DEB_CMD); |
| return 0; |
| } |
| |
| int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action, |
| struct cmd_ds_mesh_access *cmd) |
| { |
| int ret; |
| |
| lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action); |
| |
| cmd->hdr.command = cpu_to_le16(CMD_MESH_ACCESS); |
| cmd->hdr.size = cpu_to_le16(sizeof(*cmd)); |
| cmd->hdr.result = 0; |
| |
| cmd->action = cpu_to_le16(cmd_action); |
| |
| ret = lbs_cmd_with_response(priv, CMD_MESH_ACCESS, cmd); |
| |
| lbs_deb_leave(LBS_DEB_CMD); |
| return ret; |
| } |
| |
| static int __lbs_mesh_config_send(struct lbs_private *priv, |
| struct cmd_ds_mesh_config *cmd, |
| uint16_t action, uint16_t type) |
| { |
| int ret; |
| u16 command = CMD_MESH_CONFIG_OLD; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| /* |
| * Command id is 0xac for v10 FW along with mesh interface |
| * id in bits 14-13-12. |
| */ |
| if (priv->mesh_fw_ver == MESH_FW_NEW) |
| command = CMD_MESH_CONFIG | |
| (MESH_IFACE_ID << MESH_IFACE_BIT_OFFSET); |
| |
| cmd->hdr.command = cpu_to_le16(command); |
| cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_mesh_config)); |
| cmd->hdr.result = 0; |
| |
| cmd->type = cpu_to_le16(type); |
| cmd->action = cpu_to_le16(action); |
| |
| ret = lbs_cmd_with_response(priv, command, cmd); |
| |
| lbs_deb_leave(LBS_DEB_CMD); |
| return ret; |
| } |
| |
| int lbs_mesh_config_send(struct lbs_private *priv, |
| struct cmd_ds_mesh_config *cmd, |
| uint16_t action, uint16_t type) |
| { |
| int ret; |
| |
| if (!(priv->fwcapinfo & FW_CAPINFO_PERSISTENT_CONFIG)) |
| return -EOPNOTSUPP; |
| |
| ret = __lbs_mesh_config_send(priv, cmd, action, type); |
| return ret; |
| } |
| |
| /* This function is the CMD_MESH_CONFIG legacy function. It only handles the |
| * START and STOP actions. The extended actions supported by CMD_MESH_CONFIG |
| * are all handled by preparing a struct cmd_ds_mesh_config and passing it to |
| * lbs_mesh_config_send. |
| */ |
| int lbs_mesh_config(struct lbs_private *priv, uint16_t action, uint16_t chan) |
| { |
| struct cmd_ds_mesh_config cmd; |
| struct mrvl_meshie *ie; |
| DECLARE_SSID_BUF(ssid); |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.channel = cpu_to_le16(chan); |
| ie = (struct mrvl_meshie *)cmd.data; |
| |
| switch (action) { |
| case CMD_ACT_MESH_CONFIG_START: |
| ie->id = WLAN_EID_GENERIC; |
| ie->val.oui[0] = 0x00; |
| ie->val.oui[1] = 0x50; |
| ie->val.oui[2] = 0x43; |
| ie->val.type = MARVELL_MESH_IE_TYPE; |
| ie->val.subtype = MARVELL_MESH_IE_SUBTYPE; |
| ie->val.version = MARVELL_MESH_IE_VERSION; |
| ie->val.active_protocol_id = MARVELL_MESH_PROTO_ID_HWMP; |
| ie->val.active_metric_id = MARVELL_MESH_METRIC_ID; |
| ie->val.mesh_capability = MARVELL_MESH_CAPABILITY; |
| ie->val.mesh_id_len = priv->mesh_ssid_len; |
| memcpy(ie->val.mesh_id, priv->mesh_ssid, priv->mesh_ssid_len); |
| ie->len = sizeof(struct mrvl_meshie_val) - |
| IW_ESSID_MAX_SIZE + priv->mesh_ssid_len; |
| cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie_val)); |
| break; |
| case CMD_ACT_MESH_CONFIG_STOP: |
| break; |
| default: |
| return -1; |
| } |
| lbs_deb_cmd("mesh config action %d type %x channel %d SSID %s\n", |
| action, priv->mesh_tlv, chan, |
| print_ssid(ssid, priv->mesh_ssid, priv->mesh_ssid_len)); |
| |
| return __lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv); |
| } |
| |
| static int lbs_cmd_bcn_ctrl(struct lbs_private * priv, |
| struct cmd_ds_command *cmd, |
| u16 cmd_action) |
| { |
| struct cmd_ds_802_11_beacon_control |
| *bcn_ctrl = &cmd->params.bcn_ctrl; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| cmd->size = |
| cpu_to_le16(sizeof(struct cmd_ds_802_11_beacon_control) |
| + S_DS_GEN); |
| cmd->command = cpu_to_le16(CMD_802_11_BEACON_CTRL); |
| |
| bcn_ctrl->action = cpu_to_le16(cmd_action); |
| bcn_ctrl->beacon_enable = cpu_to_le16(priv->beacon_enable); |
| bcn_ctrl->beacon_period = cpu_to_le16(priv->beacon_period); |
| |
| lbs_deb_leave(LBS_DEB_CMD); |
| return 0; |
| } |
| |
| static void lbs_queue_cmd(struct lbs_private *priv, |
| struct cmd_ctrl_node *cmdnode) |
| { |
| unsigned long flags; |
| int addtail = 1; |
| |
| lbs_deb_enter(LBS_DEB_HOST); |
| |
| if (!cmdnode) { |
| lbs_deb_host("QUEUE_CMD: cmdnode is NULL\n"); |
| goto done; |
| } |
| if (!cmdnode->cmdbuf->size) { |
| lbs_deb_host("DNLD_CMD: cmd size is zero\n"); |
| goto done; |
| } |
| cmdnode->result = 0; |
| |
| /* Exit_PS command needs to be queued in the header always. */ |
| if (le16_to_cpu(cmdnode->cmdbuf->command) == CMD_802_11_PS_MODE) { |
| struct cmd_ds_802_11_ps_mode *psm = (void *) &cmdnode->cmdbuf[1]; |
| |
| if (psm->action == cpu_to_le16(CMD_SUBCMD_EXIT_PS)) { |
| if (priv->psstate != PS_STATE_FULL_POWER) |
| addtail = 0; |
| } |
| } |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| |
| if (addtail) |
| list_add_tail(&cmdnode->list, &priv->cmdpendingq); |
| else |
| list_add(&cmdnode->list, &priv->cmdpendingq); |
| |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| |
| lbs_deb_host("QUEUE_CMD: inserted command 0x%04x into cmdpendingq\n", |
| le16_to_cpu(cmdnode->cmdbuf->command)); |
| |
| done: |
| lbs_deb_leave(LBS_DEB_HOST); |
| } |
| |
| static void lbs_submit_command(struct lbs_private *priv, |
| struct cmd_ctrl_node *cmdnode) |
| { |
| unsigned long flags; |
| struct cmd_header *cmd; |
| uint16_t cmdsize; |
| uint16_t command; |
| int timeo = 3 * HZ; |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_HOST); |
| |
| cmd = cmdnode->cmdbuf; |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| priv->cur_cmd = cmdnode; |
| priv->cur_cmd_retcode = 0; |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| |
| cmdsize = le16_to_cpu(cmd->size); |
| command = le16_to_cpu(cmd->command); |
| |
| /* These commands take longer */ |
| if (command == CMD_802_11_SCAN || command == CMD_802_11_ASSOCIATE) |
| timeo = 5 * HZ; |
| |
| lbs_deb_cmd("DNLD_CMD: command 0x%04x, seq %d, size %d\n", |
| command, le16_to_cpu(cmd->seqnum), cmdsize); |
| lbs_deb_hex(LBS_DEB_CMD, "DNLD_CMD", (void *) cmdnode->cmdbuf, cmdsize); |
| |
| ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) cmd, cmdsize); |
| |
| if (ret) { |
| lbs_pr_info("DNLD_CMD: hw_host_to_card failed: %d\n", ret); |
| /* Let the timer kick in and retry, and potentially reset |
| the whole thing if the condition persists */ |
| timeo = HZ/4; |
| } |
| |
| /* Setup the timer after transmit command */ |
| mod_timer(&priv->command_timer, jiffies + timeo); |
| |
| lbs_deb_leave(LBS_DEB_HOST); |
| } |
| |
| /** |
| * This function inserts command node to cmdfreeq |
| * after cleans it. Requires priv->driver_lock held. |
| */ |
| static void __lbs_cleanup_and_insert_cmd(struct lbs_private *priv, |
| struct cmd_ctrl_node *cmdnode) |
| { |
| lbs_deb_enter(LBS_DEB_HOST); |
| |
| if (!cmdnode) |
| goto out; |
| |
| cmdnode->callback = NULL; |
| cmdnode->callback_arg = 0; |
| |
| memset(cmdnode->cmdbuf, 0, LBS_CMD_BUFFER_SIZE); |
| |
| list_add_tail(&cmdnode->list, &priv->cmdfreeq); |
| out: |
| lbs_deb_leave(LBS_DEB_HOST); |
| } |
| |
| static void lbs_cleanup_and_insert_cmd(struct lbs_private *priv, |
| struct cmd_ctrl_node *ptempcmd) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| __lbs_cleanup_and_insert_cmd(priv, ptempcmd); |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| } |
| |
| void lbs_complete_command(struct lbs_private *priv, struct cmd_ctrl_node *cmd, |
| int result) |
| { |
| if (cmd == priv->cur_cmd) |
| priv->cur_cmd_retcode = result; |
| |
| cmd->result = result; |
| cmd->cmdwaitqwoken = 1; |
| wake_up_interruptible(&cmd->cmdwait_q); |
| |
| if (!cmd->callback || cmd->callback == lbs_cmd_async_callback) |
| __lbs_cleanup_and_insert_cmd(priv, cmd); |
| priv->cur_cmd = NULL; |
| } |
| |
| int lbs_set_radio(struct lbs_private *priv, u8 preamble, u8 radio_on) |
| { |
| struct cmd_ds_802_11_radio_control cmd; |
| int ret = -EINVAL; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| cmd.action = cpu_to_le16(CMD_ACT_SET); |
| |
| /* Only v8 and below support setting the preamble */ |
| if (priv->fwrelease < 0x09000000) { |
| switch (preamble) { |
| case RADIO_PREAMBLE_SHORT: |
| if (!(priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)) |
| goto out; |
| /* Fall through */ |
| case RADIO_PREAMBLE_AUTO: |
| case RADIO_PREAMBLE_LONG: |
| cmd.control = cpu_to_le16(preamble); |
| break; |
| default: |
| goto out; |
| } |
| } |
| |
| if (radio_on) |
| cmd.control |= cpu_to_le16(0x1); |
| else { |
| cmd.control &= cpu_to_le16(~0x1); |
| priv->txpower_cur = 0; |
| } |
| |
| lbs_deb_cmd("RADIO_CONTROL: radio %s, preamble %d\n", |
| radio_on ? "ON" : "OFF", preamble); |
| |
| priv->radio_on = radio_on; |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_RADIO_CONTROL, &cmd); |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); |
| return ret; |
| } |
| |
| void lbs_set_mac_control(struct lbs_private *priv) |
| { |
| struct cmd_ds_mac_control cmd; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| cmd.action = cpu_to_le16(priv->mac_control); |
| cmd.reserved = 0; |
| |
| lbs_cmd_async(priv, CMD_MAC_CONTROL, &cmd.hdr, sizeof(cmd)); |
| |
| lbs_deb_leave(LBS_DEB_CMD); |
| } |
| |
| /** |
| * @brief This function prepare the command before send to firmware. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param cmd_no command number |
| * @param cmd_action command action: GET or SET |
| * @param wait_option wait option: wait response or not |
| * @param cmd_oid cmd oid: treated as sub command |
| * @param pdata_buf A pointer to informaion buffer |
| * @return 0 or -1 |
| */ |
| int lbs_prepare_and_send_command(struct lbs_private *priv, |
| u16 cmd_no, |
| u16 cmd_action, |
| u16 wait_option, u32 cmd_oid, void *pdata_buf) |
| { |
| int ret = 0; |
| struct cmd_ctrl_node *cmdnode; |
| struct cmd_ds_command *cmdptr; |
| unsigned long flags; |
| |
| lbs_deb_enter(LBS_DEB_HOST); |
| |
| if (!priv) { |
| lbs_deb_host("PREP_CMD: priv is NULL\n"); |
| ret = -1; |
| goto done; |
| } |
| |
| if (priv->surpriseremoved) { |
| lbs_deb_host("PREP_CMD: card removed\n"); |
| ret = -1; |
| goto done; |
| } |
| |
| cmdnode = lbs_get_cmd_ctrl_node(priv); |
| |
| if (cmdnode == NULL) { |
| lbs_deb_host("PREP_CMD: cmdnode is NULL\n"); |
| |
| /* Wake up main thread to execute next command */ |
| wake_up_interruptible(&priv->waitq); |
| ret = -1; |
| goto done; |
| } |
| |
| cmdnode->callback = NULL; |
| cmdnode->callback_arg = (unsigned long)pdata_buf; |
| |
| cmdptr = (struct cmd_ds_command *)cmdnode->cmdbuf; |
| |
| lbs_deb_host("PREP_CMD: command 0x%04x\n", cmd_no); |
| |
| /* Set sequence number, command and INT option */ |
| priv->seqnum++; |
| cmdptr->seqnum = cpu_to_le16(priv->seqnum); |
| |
| cmdptr->command = cpu_to_le16(cmd_no); |
| cmdptr->result = 0; |
| |
| switch (cmd_no) { |
| case CMD_802_11_PS_MODE: |
| ret = lbs_cmd_802_11_ps_mode(cmdptr, cmd_action); |
| break; |
| |
| case CMD_MAC_REG_ACCESS: |
| case CMD_BBP_REG_ACCESS: |
| case CMD_RF_REG_ACCESS: |
| ret = lbs_cmd_reg_access(cmdptr, cmd_action, pdata_buf); |
| break; |
| |
| case CMD_802_11_MONITOR_MODE: |
| ret = lbs_cmd_802_11_monitor_mode(cmdptr, |
| cmd_action, pdata_buf); |
| break; |
| |
| case CMD_802_11_RSSI: |
| ret = lbs_cmd_802_11_rssi(priv, cmdptr); |
| break; |
| |
| case CMD_802_11_SET_AFC: |
| case CMD_802_11_GET_AFC: |
| |
| cmdptr->command = cpu_to_le16(cmd_no); |
| cmdptr->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_afc) + |
| S_DS_GEN); |
| |
| memmove(&cmdptr->params.afc, |
| pdata_buf, sizeof(struct cmd_ds_802_11_afc)); |
| |
| ret = 0; |
| goto done; |
| |
| case CMD_802_11D_DOMAIN_INFO: |
| ret = lbs_cmd_802_11d_domain_info(priv, cmdptr, |
| cmd_no, cmd_action); |
| break; |
| |
| case CMD_802_11_TPC_CFG: |
| cmdptr->command = cpu_to_le16(CMD_802_11_TPC_CFG); |
| cmdptr->size = |
| cpu_to_le16(sizeof(struct cmd_ds_802_11_tpc_cfg) + |
| S_DS_GEN); |
| |
| memmove(&cmdptr->params.tpccfg, |
| pdata_buf, sizeof(struct cmd_ds_802_11_tpc_cfg)); |
| |
| ret = 0; |
| break; |
| case CMD_802_11_LED_GPIO_CTRL: |
| { |
| struct mrvl_ie_ledgpio *gpio = |
| (struct mrvl_ie_ledgpio*) |
| cmdptr->params.ledgpio.data; |
| |
| memmove(&cmdptr->params.ledgpio, |
| pdata_buf, |
| sizeof(struct cmd_ds_802_11_led_ctrl)); |
| |
| cmdptr->command = |
| cpu_to_le16(CMD_802_11_LED_GPIO_CTRL); |
| |
| #define ACTION_NUMLED_TLVTYPE_LEN_FIELDS_LEN 8 |
| cmdptr->size = |
| cpu_to_le16(le16_to_cpu(gpio->header.len) |
| + S_DS_GEN |
| + ACTION_NUMLED_TLVTYPE_LEN_FIELDS_LEN); |
| gpio->header.len = gpio->header.len; |
| |
| ret = 0; |
| break; |
| } |
| |
| case CMD_BT_ACCESS: |
| ret = lbs_cmd_bt_access(cmdptr, cmd_action, pdata_buf); |
| break; |
| |
| case CMD_FWT_ACCESS: |
| ret = lbs_cmd_fwt_access(cmdptr, cmd_action, pdata_buf); |
| break; |
| |
| case CMD_GET_TSF: |
| cmdptr->command = cpu_to_le16(CMD_GET_TSF); |
| cmdptr->size = cpu_to_le16(sizeof(struct cmd_ds_get_tsf) + |
| S_DS_GEN); |
| ret = 0; |
| break; |
| case CMD_802_11_BEACON_CTRL: |
| ret = lbs_cmd_bcn_ctrl(priv, cmdptr, cmd_action); |
| break; |
| default: |
| lbs_pr_err("PREP_CMD: unknown command 0x%04x\n", cmd_no); |
| ret = -1; |
| break; |
| } |
| |
| /* return error, since the command preparation failed */ |
| if (ret != 0) { |
| lbs_deb_host("PREP_CMD: command preparation failed\n"); |
| lbs_cleanup_and_insert_cmd(priv, cmdnode); |
| ret = -1; |
| goto done; |
| } |
| |
| cmdnode->cmdwaitqwoken = 0; |
| |
| lbs_queue_cmd(priv, cmdnode); |
| wake_up_interruptible(&priv->waitq); |
| |
| if (wait_option & CMD_OPTION_WAITFORRSP) { |
| lbs_deb_host("PREP_CMD: wait for response\n"); |
| might_sleep(); |
| wait_event_interruptible(cmdnode->cmdwait_q, |
| cmdnode->cmdwaitqwoken); |
| } |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| if (priv->cur_cmd_retcode) { |
| lbs_deb_host("PREP_CMD: command failed with return code %d\n", |
| priv->cur_cmd_retcode); |
| priv->cur_cmd_retcode = 0; |
| ret = -1; |
| } |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief This function allocates the command buffer and link |
| * it to command free queue. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @return 0 or -1 |
| */ |
| int lbs_allocate_cmd_buffer(struct lbs_private *priv) |
| { |
| int ret = 0; |
| u32 bufsize; |
| u32 i; |
| struct cmd_ctrl_node *cmdarray; |
| |
| lbs_deb_enter(LBS_DEB_HOST); |
| |
| /* Allocate and initialize the command array */ |
| bufsize = sizeof(struct cmd_ctrl_node) * LBS_NUM_CMD_BUFFERS; |
| if (!(cmdarray = kzalloc(bufsize, GFP_KERNEL))) { |
| lbs_deb_host("ALLOC_CMD_BUF: tempcmd_array is NULL\n"); |
| ret = -1; |
| goto done; |
| } |
| priv->cmd_array = cmdarray; |
| |
| /* Allocate and initialize each command buffer in the command array */ |
| for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) { |
| cmdarray[i].cmdbuf = kzalloc(LBS_CMD_BUFFER_SIZE, GFP_KERNEL); |
| if (!cmdarray[i].cmdbuf) { |
| lbs_deb_host("ALLOC_CMD_BUF: ptempvirtualaddr is NULL\n"); |
| ret = -1; |
| goto done; |
| } |
| } |
| |
| for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) { |
| init_waitqueue_head(&cmdarray[i].cmdwait_q); |
| lbs_cleanup_and_insert_cmd(priv, &cmdarray[i]); |
| } |
| ret = 0; |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief This function frees the command buffer. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @return 0 or -1 |
| */ |
| int lbs_free_cmd_buffer(struct lbs_private *priv) |
| { |
| struct cmd_ctrl_node *cmdarray; |
| unsigned int i; |
| |
| lbs_deb_enter(LBS_DEB_HOST); |
| |
| /* need to check if cmd array is allocated or not */ |
| if (priv->cmd_array == NULL) { |
| lbs_deb_host("FREE_CMD_BUF: cmd_array is NULL\n"); |
| goto done; |
| } |
| |
| cmdarray = priv->cmd_array; |
| |
| /* Release shared memory buffers */ |
| for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) { |
| if (cmdarray[i].cmdbuf) { |
| kfree(cmdarray[i].cmdbuf); |
| cmdarray[i].cmdbuf = NULL; |
| } |
| } |
| |
| /* Release cmd_ctrl_node */ |
| if (priv->cmd_array) { |
| kfree(priv->cmd_array); |
| priv->cmd_array = NULL; |
| } |
| |
| done: |
| lbs_deb_leave(LBS_DEB_HOST); |
| return 0; |
| } |
| |
| /** |
| * @brief This function gets a free command node if available in |
| * command free queue. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @return cmd_ctrl_node A pointer to cmd_ctrl_node structure or NULL |
| */ |
| static struct cmd_ctrl_node *lbs_get_cmd_ctrl_node(struct lbs_private *priv) |
| { |
| struct cmd_ctrl_node *tempnode; |
| unsigned long flags; |
| |
| lbs_deb_enter(LBS_DEB_HOST); |
| |
| if (!priv) |
| return NULL; |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| |
| if (!list_empty(&priv->cmdfreeq)) { |
| tempnode = list_first_entry(&priv->cmdfreeq, |
| struct cmd_ctrl_node, list); |
| list_del(&tempnode->list); |
| } else { |
| lbs_deb_host("GET_CMD_NODE: cmd_ctrl_node is not available\n"); |
| tempnode = NULL; |
| } |
| |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| |
| lbs_deb_leave(LBS_DEB_HOST); |
| return tempnode; |
| } |
| |
| /** |
| * @brief This function executes next command in command |
| * pending queue. It will put firmware back to PS mode |
| * if applicable. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @return 0 or -1 |
| */ |
| int lbs_execute_next_command(struct lbs_private *priv) |
| { |
| struct cmd_ctrl_node *cmdnode = NULL; |
| struct cmd_header *cmd; |
| unsigned long flags; |
| int ret = 0; |
| |
| /* Debug group is LBS_DEB_THREAD and not LBS_DEB_HOST, because the |
| * only caller to us is lbs_thread() and we get even when a |
| * data packet is received */ |
| lbs_deb_enter(LBS_DEB_THREAD); |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| |
| if (priv->cur_cmd) { |
| lbs_pr_alert( "EXEC_NEXT_CMD: already processing command!\n"); |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| ret = -1; |
| goto done; |
| } |
| |
| if (!list_empty(&priv->cmdpendingq)) { |
| cmdnode = list_first_entry(&priv->cmdpendingq, |
| struct cmd_ctrl_node, list); |
| } |
| |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| |
| if (cmdnode) { |
| cmd = cmdnode->cmdbuf; |
| |
| if (is_command_allowed_in_ps(le16_to_cpu(cmd->command))) { |
| if ((priv->psstate == PS_STATE_SLEEP) || |
| (priv->psstate == PS_STATE_PRE_SLEEP)) { |
| lbs_deb_host( |
| "EXEC_NEXT_CMD: cannot send cmd 0x%04x in psstate %d\n", |
| le16_to_cpu(cmd->command), |
| priv->psstate); |
| ret = -1; |
| goto done; |
| } |
| lbs_deb_host("EXEC_NEXT_CMD: OK to send command " |
| "0x%04x in psstate %d\n", |
| le16_to_cpu(cmd->command), priv->psstate); |
| } else if (priv->psstate != PS_STATE_FULL_POWER) { |
| /* |
| * 1. Non-PS command: |
| * Queue it. set needtowakeup to TRUE if current state |
| * is SLEEP, otherwise call lbs_ps_wakeup to send Exit_PS. |
| * 2. PS command but not Exit_PS: |
| * Ignore it. |
| * 3. PS command Exit_PS: |
| * Set needtowakeup to TRUE if current state is SLEEP, |
| * otherwise send this command down to firmware |
| * immediately. |
| */ |
| if (cmd->command != cpu_to_le16(CMD_802_11_PS_MODE)) { |
| /* Prepare to send Exit PS, |
| * this non PS command will be sent later */ |
| if ((priv->psstate == PS_STATE_SLEEP) |
| || (priv->psstate == PS_STATE_PRE_SLEEP) |
| ) { |
| /* w/ new scheme, it will not reach here. |
| since it is blocked in main_thread. */ |
| priv->needtowakeup = 1; |
| } else |
| lbs_ps_wakeup(priv, 0); |
| |
| ret = 0; |
| goto done; |
| } else { |
| /* |
| * PS command. Ignore it if it is not Exit_PS. |
| * otherwise send it down immediately. |
| */ |
| struct cmd_ds_802_11_ps_mode *psm = (void *)&cmd[1]; |
| |
| lbs_deb_host( |
| "EXEC_NEXT_CMD: PS cmd, action 0x%02x\n", |
| psm->action); |
| if (psm->action != |
| cpu_to_le16(CMD_SUBCMD_EXIT_PS)) { |
| lbs_deb_host( |
| "EXEC_NEXT_CMD: ignore ENTER_PS cmd\n"); |
| list_del(&cmdnode->list); |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| lbs_complete_command(priv, cmdnode, 0); |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| |
| ret = 0; |
| goto done; |
| } |
| |
| if ((priv->psstate == PS_STATE_SLEEP) || |
| (priv->psstate == PS_STATE_PRE_SLEEP)) { |
| lbs_deb_host( |
| "EXEC_NEXT_CMD: ignore EXIT_PS cmd in sleep\n"); |
| list_del(&cmdnode->list); |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| lbs_complete_command(priv, cmdnode, 0); |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| priv->needtowakeup = 1; |
| |
| ret = 0; |
| goto done; |
| } |
| |
| lbs_deb_host( |
| "EXEC_NEXT_CMD: sending EXIT_PS\n"); |
| } |
| } |
| list_del(&cmdnode->list); |
| lbs_deb_host("EXEC_NEXT_CMD: sending command 0x%04x\n", |
| le16_to_cpu(cmd->command)); |
| lbs_submit_command(priv, cmdnode); |
| } else { |
| /* |
| * check if in power save mode, if yes, put the device back |
| * to PS mode |
| */ |
| if ((priv->psmode != LBS802_11POWERMODECAM) && |
| (priv->psstate == PS_STATE_FULL_POWER) && |
| ((priv->connect_status == LBS_CONNECTED) || |
| (priv->mesh_connect_status == LBS_CONNECTED))) { |
| if (priv->secinfo.WPAenabled || |
| priv->secinfo.WPA2enabled) { |
| /* check for valid WPA group keys */ |
| if (priv->wpa_mcast_key.len || |
| priv->wpa_unicast_key.len) { |
| lbs_deb_host( |
| "EXEC_NEXT_CMD: WPA enabled and GTK_SET" |
| " go back to PS_SLEEP"); |
| lbs_ps_sleep(priv, 0); |
| } |
| } else { |
| lbs_deb_host( |
| "EXEC_NEXT_CMD: cmdpendingq empty, " |
| "go back to PS_SLEEP"); |
| lbs_ps_sleep(priv, 0); |
| } |
| } |
| } |
| |
| ret = 0; |
| done: |
| lbs_deb_leave(LBS_DEB_THREAD); |
| return ret; |
| } |
| |
| void lbs_send_iwevcustom_event(struct lbs_private *priv, s8 *str) |
| { |
| union iwreq_data iwrq; |
| u8 buf[50]; |
| |
| lbs_deb_enter(LBS_DEB_WEXT); |
| |
| memset(&iwrq, 0, sizeof(union iwreq_data)); |
| memset(buf, 0, sizeof(buf)); |
| |
| snprintf(buf, sizeof(buf) - 1, "%s", str); |
| |
| iwrq.data.length = strlen(buf) + 1 + IW_EV_LCP_LEN; |
| |
| /* Send Event to upper layer */ |
| lbs_deb_wext("event indication string %s\n", (char *)buf); |
| lbs_deb_wext("event indication length %d\n", iwrq.data.length); |
| lbs_deb_wext("sending wireless event IWEVCUSTOM for %s\n", str); |
| |
| wireless_send_event(priv->dev, IWEVCUSTOM, &iwrq, buf); |
| |
| lbs_deb_leave(LBS_DEB_WEXT); |
| } |
| |
| static void lbs_send_confirmsleep(struct lbs_private *priv) |
| { |
| unsigned long flags; |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_HOST); |
| lbs_deb_hex(LBS_DEB_HOST, "sleep confirm", (u8 *) &confirm_sleep, |
| sizeof(confirm_sleep)); |
| |
| ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) &confirm_sleep, |
| sizeof(confirm_sleep)); |
| if (ret) { |
| lbs_pr_alert("confirm_sleep failed\n"); |
| goto out; |
| } |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| |
| /* We don't get a response on the sleep-confirmation */ |
| priv->dnld_sent = DNLD_RES_RECEIVED; |
| |
| /* If nothing to do, go back to sleep (?) */ |
| if (!__kfifo_len(priv->event_fifo) && !priv->resp_len[priv->resp_idx]) |
| priv->psstate = PS_STATE_SLEEP; |
| |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| |
| out: |
| lbs_deb_leave(LBS_DEB_HOST); |
| } |
| |
| void lbs_ps_sleep(struct lbs_private *priv, int wait_option) |
| { |
| lbs_deb_enter(LBS_DEB_HOST); |
| |
| /* |
| * PS is currently supported only in Infrastructure mode |
| * Remove this check if it is to be supported in IBSS mode also |
| */ |
| |
| lbs_prepare_and_send_command(priv, CMD_802_11_PS_MODE, |
| CMD_SUBCMD_ENTER_PS, wait_option, 0, NULL); |
| |
| lbs_deb_leave(LBS_DEB_HOST); |
| } |
| |
| /** |
| * @brief This function sends Exit_PS command to firmware. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param wait_option wait response or not |
| * @return n/a |
| */ |
| void lbs_ps_wakeup(struct lbs_private *priv, int wait_option) |
| { |
| __le32 Localpsmode; |
| |
| lbs_deb_enter(LBS_DEB_HOST); |
| |
| Localpsmode = cpu_to_le32(LBS802_11POWERMODECAM); |
| |
| lbs_prepare_and_send_command(priv, CMD_802_11_PS_MODE, |
| CMD_SUBCMD_EXIT_PS, |
| wait_option, 0, &Localpsmode); |
| |
| lbs_deb_leave(LBS_DEB_HOST); |
| } |
| |
| /** |
| * @brief This function checks condition and prepares to |
| * send sleep confirm command to firmware if ok. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param psmode Power Saving mode |
| * @return n/a |
| */ |
| void lbs_ps_confirm_sleep(struct lbs_private *priv) |
| { |
| unsigned long flags =0; |
| int allowed = 1; |
| |
| lbs_deb_enter(LBS_DEB_HOST); |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| if (priv->dnld_sent) { |
| allowed = 0; |
| lbs_deb_host("dnld_sent was set\n"); |
| } |
| |
| /* In-progress command? */ |
| if (priv->cur_cmd) { |
| allowed = 0; |
| lbs_deb_host("cur_cmd was set\n"); |
| } |
| |
| /* Pending events or command responses? */ |
| if (__kfifo_len(priv->event_fifo) || priv->resp_len[priv->resp_idx]) { |
| allowed = 0; |
| lbs_deb_host("pending events or command responses\n"); |
| } |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| |
| if (allowed) { |
| lbs_deb_host("sending lbs_ps_confirm_sleep\n"); |
| lbs_send_confirmsleep(priv); |
| } else { |
| lbs_deb_host("sleep confirm has been delayed\n"); |
| } |
| |
| lbs_deb_leave(LBS_DEB_HOST); |
| } |
| |
| |
| /** |
| * @brief Configures the transmission power control functionality. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param enable Transmission power control enable |
| * @param p0 Power level when link quality is good (dBm). |
| * @param p1 Power level when link quality is fair (dBm). |
| * @param p2 Power level when link quality is poor (dBm). |
| * @param usesnr Use Signal to Noise Ratio in TPC |
| * |
| * @return 0 on success |
| */ |
| int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1, |
| int8_t p2, int usesnr) |
| { |
| struct cmd_ds_802_11_tpc_cfg cmd; |
| int ret; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| cmd.action = cpu_to_le16(CMD_ACT_SET); |
| cmd.enable = !!enable; |
| cmd.usesnr = !!usesnr; |
| cmd.P0 = p0; |
| cmd.P1 = p1; |
| cmd.P2 = p2; |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_TPC_CFG, &cmd); |
| |
| return ret; |
| } |
| |
| /** |
| * @brief Configures the power adaptation settings. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param enable Power adaptation enable |
| * @param p0 Power level for 1, 2, 5.5 and 11 Mbps (dBm). |
| * @param p1 Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm). |
| * @param p2 Power level for 48 and 54 Mbps (dBm). |
| * |
| * @return 0 on Success |
| */ |
| |
| int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0, |
| int8_t p1, int8_t p2) |
| { |
| struct cmd_ds_802_11_pa_cfg cmd; |
| int ret; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| cmd.action = cpu_to_le16(CMD_ACT_SET); |
| cmd.enable = !!enable; |
| cmd.P0 = p0; |
| cmd.P1 = p1; |
| cmd.P2 = p2; |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_PA_CFG , &cmd); |
| |
| return ret; |
| } |
| |
| |
| static struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv, |
| uint16_t command, struct cmd_header *in_cmd, int in_cmd_size, |
| int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *), |
| unsigned long callback_arg) |
| { |
| struct cmd_ctrl_node *cmdnode; |
| |
| lbs_deb_enter(LBS_DEB_HOST); |
| |
| if (priv->surpriseremoved) { |
| lbs_deb_host("PREP_CMD: card removed\n"); |
| cmdnode = ERR_PTR(-ENOENT); |
| goto done; |
| } |
| |
| cmdnode = lbs_get_cmd_ctrl_node(priv); |
| if (cmdnode == NULL) { |
| lbs_deb_host("PREP_CMD: cmdnode is NULL\n"); |
| |
| /* Wake up main thread to execute next command */ |
| wake_up_interruptible(&priv->waitq); |
| cmdnode = ERR_PTR(-ENOBUFS); |
| goto done; |
| } |
| |
| cmdnode->callback = callback; |
| cmdnode->callback_arg = callback_arg; |
| |
| /* Copy the incoming command to the buffer */ |
| memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size); |
| |
| /* Set sequence number, clean result, move to buffer */ |
| priv->seqnum++; |
| cmdnode->cmdbuf->command = cpu_to_le16(command); |
| cmdnode->cmdbuf->size = cpu_to_le16(in_cmd_size); |
| cmdnode->cmdbuf->seqnum = cpu_to_le16(priv->seqnum); |
| cmdnode->cmdbuf->result = 0; |
| |
| lbs_deb_host("PREP_CMD: command 0x%04x\n", command); |
| |
| cmdnode->cmdwaitqwoken = 0; |
| lbs_queue_cmd(priv, cmdnode); |
| wake_up_interruptible(&priv->waitq); |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_HOST, "ret %p", cmdnode); |
| return cmdnode; |
| } |
| |
| void lbs_cmd_async(struct lbs_private *priv, uint16_t command, |
| struct cmd_header *in_cmd, int in_cmd_size) |
| { |
| lbs_deb_enter(LBS_DEB_CMD); |
| __lbs_cmd_async(priv, command, in_cmd, in_cmd_size, |
| lbs_cmd_async_callback, 0); |
| lbs_deb_leave(LBS_DEB_CMD); |
| } |
| |
| int __lbs_cmd(struct lbs_private *priv, uint16_t command, |
| struct cmd_header *in_cmd, int in_cmd_size, |
| int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *), |
| unsigned long callback_arg) |
| { |
| struct cmd_ctrl_node *cmdnode; |
| unsigned long flags; |
| int ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_HOST); |
| |
| cmdnode = __lbs_cmd_async(priv, command, in_cmd, in_cmd_size, |
| callback, callback_arg); |
| if (IS_ERR(cmdnode)) { |
| ret = PTR_ERR(cmdnode); |
| goto done; |
| } |
| |
| might_sleep(); |
| wait_event_interruptible(cmdnode->cmdwait_q, cmdnode->cmdwaitqwoken); |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| ret = cmdnode->result; |
| if (ret) |
| lbs_pr_info("PREP_CMD: command 0x%04x failed: %d\n", |
| command, ret); |
| |
| __lbs_cleanup_and_insert_cmd(priv, cmdnode); |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(__lbs_cmd); |
| |
| |