arch/blackfin/kernel/vmlinux.lds.S

/*
 * Copyright 2004-2009 Analog Devices Inc.
 *
 * Licensed under the GPL-2 or later
 */

#define VMLINUX_SYMBOL(_sym_) _##_sym_

#include <asm-generic/vmlinux.lds.h>
#include <asm/mem_map.h>
#include <asm/page.h>
#include <asm/thread_info.h>

OUTPUT_FORMAT("elf32-bfin")
ENTRY(__start)
_jiffies = _jiffies_64;

SECTIONS
{
	. = CONFIG_BOOT_LOAD;
	/* Neither the text, ro_data or bss section need to be aligned
	 * So pack them back to back
	 */
	.text :
	{
		__text = .;
		_text = .;
		__stext = .;
		TEXT_TEXT
#ifndef CONFIG_SCHEDULE_L1
		SCHED_TEXT
#endif
		LOCK_TEXT
		IRQENTRY_TEXT
		KPROBES_TEXT
		*(.text.*)
		*(.fixup)

#if !L1_CODE_LENGTH
		*(.l1.text)
#endif

		. = ALIGN(16);
		___start___ex_table = .;
		*(__ex_table)
		___stop___ex_table = .;

		__etext = .;
	}

	NOTES

	/* Just in case the first read only is a 32-bit access */
	RO_DATA(4)

	.bss :
	{
		. = ALIGN(4);
		___bss_start = .;
		*(.bss .bss.*)
		*(COMMON)
#if !L1_DATA_A_LENGTH
		*(.l1.bss)
#endif
#if !L1_DATA_B_LENGTH
		*(.l1.bss.B)
#endif
		. = ALIGN(4);
		___bss_stop = .;
	}

	.data :
	{
		__sdata = .;
		/* This gets done first, so the glob doesn't suck it in */
		CACHELINE_ALIGNED_DATA(32)

#if !L1_DATA_A_LENGTH
		. = ALIGN(32);
		*(.data_l1.cacheline_aligned)
		*(.l1.data)
#endif
#if !L1_DATA_B_LENGTH
		*(.l1.data.B)
#endif
#if !L2_LENGTH
		. = ALIGN(32);
		*(.data_l2.cacheline_aligned)
		*(.l2.data)
#endif

		DATA_DATA
		CONSTRUCTORS

		INIT_TASK_DATA(THREAD_SIZE)

		__edata = .;
	}

	/* The init section should be last, so when we free it, it goes into
	 * the general memory pool, and (hopefully) will decrease fragmentation
	 * a tiny bit. The init section has a _requirement_ that it be
	 * PAGE_SIZE aligned
	 */
	. = ALIGN(PAGE_SIZE);
	___init_begin = .;

	INIT_TEXT_SECTION(PAGE_SIZE)
	. = ALIGN(16);
	INIT_DATA_SECTION(16)
	PERCPU(4)

	/* we have to discard exit text and such at runtime, not link time, to
	 * handle embedded cross-section references (alt instructions, bug
	 * table, eh_frame, etc...)
	 */
	.exit.text :
	{
		EXIT_TEXT
	}
	.exit.data :
	{
		EXIT_DATA
	}

	__l1_lma_start = .;

	.text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
	{
		. = ALIGN(4);
		__stext_l1 = .;
		*(.l1.text)
#ifdef CONFIG_SCHEDULE_L1
		SCHED_TEXT
#endif
		. = ALIGN(4);
		__etext_l1 = .;
	}
	ASSERT (SIZEOF(.text_l1) <= L1_CODE_LENGTH, "L1 text overflow!")

	.data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1))
	{
		. = ALIGN(4);
		__sdata_l1 = .;
		*(.l1.data)
		__edata_l1 = .;

		. = ALIGN(32);
		*(.data_l1.cacheline_aligned)

		. = ALIGN(4);
		__sbss_l1 = .;
		*(.l1.bss)
		. = ALIGN(4);
		__ebss_l1 = .;
	}
	ASSERT (SIZEOF(.data_l1) <= L1_DATA_A_LENGTH, "L1 data A overflow!")

	.data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1))
	{
		. = ALIGN(4);
		__sdata_b_l1 = .;
		*(.l1.data.B)
		__edata_b_l1 = .;

		. = ALIGN(4);
		__sbss_b_l1 = .;
		*(.l1.bss.B)
		. = ALIGN(4);
		__ebss_b_l1 = .;
	}
	ASSERT (SIZEOF(.data_b_l1) <= L1_DATA_B_LENGTH, "L1 data B overflow!")

	__l2_lma_start = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);

	.text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1))
	{
		. = ALIGN(4);
		__stext_l2 = .;
		*(.l2.text)
		. = ALIGN(4);
		__etext_l2 = .;

		. = ALIGN(4);
		__sdata_l2 = .;
		*(.l2.data)
		__edata_l2 = .;

		. = ALIGN(32);
		*(.data_l2.cacheline_aligned)

		. = ALIGN(4);
		__sbss_l2 = .;
		*(.l2.bss)
		. = ALIGN(4);
		__ebss_l2 = .;
	}
	ASSERT (SIZEOF(.text_data_l2) <= L2_LENGTH, "L2 overflow!")

	/* Force trailing alignment of our init section so that when we
	 * free our init memory, we don't leave behind a partial page.
	 */
	. = LOADADDR(.text_data_l2) + SIZEOF(.text_data_l2);
	. = ALIGN(PAGE_SIZE);
	___init_end = .;

	__end =.;

	STABS_DEBUG

	DWARF_DEBUG

	DISCARDS
}