| ========================================================================
|
| VLAN Setup for Home Gateway Solution
|
| ========================================================================
|
|
|
| Vlan Setup Program will show how to setup the QuaterDeck's vlan
|
| for Home Gateway.
|
| In the sample program, Port 0 (WAN port) and CPU Port (Port 5) are in
|
| a VLAN 2, and Port 1 ~ Port 6 (including CPU Port) are in a VLAN 1.
|
| |
| VLAN MAP setting for the given sample program is: |
| Port 0 (WAN) = 0x20, |
| Port 1 (LAN) = 0x7C, |
| Port 2 (LAN) = 0x7A, |
| Port 3 (LAN) = 0x76, |
| Port 4 (LAN) = 0x6E, |
| Port 5 (CPU) = 0x5E, and |
| Port 6 (LAN) = 0x3E |
| |
| Notes: |
| 1) Trailer Mode is enabled: |
| When Ethernet Device, which is directly connected to CPU port, sends out a packet |
| to WAN, DPV in Trailer Tag should have WAN port bit set (bit 0 in this case), and |
| to LAN, Trailer Tag should be set to 0. |
| Restriction : Only one group of VLANs can have multiple ports. |
| 2) Header Mode is enabled: |
| When Ethernet Device, which is directly connected to CPU port, sends out a packet |
| to WAN, VlanTable in Header Tag should have WAN ports bits set (bit 0 in this case), and |
| to LAN, VlanTable in Header Tag should have LAN ports bits set (bit 1~4 and 6 in this case) |
| |
| hgVlan.c
|
| sampleHGVlanSetup is the main function for the Home Gateway setup.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
