Google Git
Sign in
gfiber / kernel / prism / 32248e7f4477323c3e4907e45d089e640068415d / . / arch / arm / plat-feroceon / mv_hal / nfc / mvNfc.c
blob: bcc41cba63c3e46f8f07c384941d5825c249fe67 [file] [log] [blame]
/*******************************************************************************
Copyright (C) Marvell International Ltd. and its affiliates
This software file (the "File") is owned and distributed by Marvell
International Ltd. and/or its affiliates ("Marvell") under the following
alternative licensing terms. Once you have made an election to distribute the
File under one of the following license alternatives, please (i) delete this
introductory statement regarding license alternatives, (ii) delete the two
license alternatives that you have not elected to use and (iii) preserve the
Marvell copyright notice above.
********************************************************************************
Marvell Commercial License Option
If you received this File from Marvell and you have entered into a commercial
license agreement (a "Commercial License") with Marvell, the File is licensed
to you under the terms of the applicable Commercial License.
********************************************************************************
Marvell GPL License Option
If you received this File from Marvell, you may opt to use, redistribute and/or
modify this File in accordance with the terms and conditions of the General
Public License Version 2, June 1991 (the "GPL License"), a copy of which is
available along with the File in the license.txt file or by writing to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
DISCLAIMED. The GPL License provides additional details about this warranty
disclaimer.
********************************************************************************
Marvell BSD License Option
If you received this File from Marvell, you may opt to use, redistribute and/or
modify this File under the following licensing terms.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of Marvell nor the names of its contributors may be
used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************/
#include "mvCommon.h"
#include "mvOs.h"
#include "ctrlEnv/mvCtrlEnvSpec.h"
#include "mvSysNfcConfig.h"
#include "mvNfcRegs.h"
#ifdef MV_INCLUDE_PDMA
#include "pdma/mvPdma.h"
#include "pdma/mvPdmaRegs.h"
#endif
#include "mvNfc.h"
/*************/
/* Constants */
/*************/
#define NFC_NATIVE_READ_ID_CMD 0x0090
#define NFC_READ_ID_ADDR_LEN 1
#define NFC_ERASE_ADDR_LEN 3
#define NFC_SP_READ_ADDR_LEN 3
#define NFC_SP_BIG_READ_ADDR_LEN 4
#define NFC_LP_READ_ADDR_LEN 5
#define NFC_BLOCK_ADDR_BITS 0xFFFFFF
#define NFC_SP_COL_OFFS 0
#define NFC_SP_COL_MASK (0xFF << NFC_SP_COL_OFFS)
#define NFC_LP_COL_OFFS 0
#define NFC_LP_COL_MASK (0xFFFF << NFC_SP_COL_OFFS)
#define NFC_SP_PG_OFFS 8
#define NFC_SP_PG_MASK (0xFFFFFF << NFC_SP_PG_OFFS)
#define NFC_LP_PG_OFFS 16
#define NFC_LP_PG_MASK (0xFFFF << NFC_LP_PG_OFFS)
#define NFC_PG_CNT_OFFS 8
#define NFC_PG_CNT_MASK (0xFF << NFC_PG_CNT_OFFS)
#define NFC_READ_ID_PDMA_DATA_LEN 32
#define NFC_READ_STATUS_PDMA_DATA_LEN 32
#define NFC_READ_ID_PIO_DATA_LEN 8
#define NFC_READ_STATUS_PIO_DATA_LEN 8
#define NFC_RW_SP_PDMA_DATA_LEN 544
#define NFC_RW_SP_NO_ECC_DATA_LEN 528
#define NFC_RW_SP_HMNG_ECC_DATA_LEN 520
#define NFC_RW_SP_G_NO_ECC_DATA_LEN 528
#define NFC_RW_SP_G_HMNG_ECC_DATA_LEN 526
#define NFC_RW_LP_PDMA_DATA_LEN 2112
#define NFC_RW_LP_NO_ECC_DATA_LEN 2112
#define NFC_RW_LP_HMNG_ECC_DATA_LEN 2088
#define NFC_RW_LP_BCH_ECC_DATA_LEN 2080
#define NFC_RW_LP_G_NO_ECC_DATA_LEN 2112
#define NFC_RW_LP_G_HMNG_ECC_DATA_LEN 2088
#define NFC_RW_LP_G_BCH_ECC_DATA_LEN 2080
#define NFC_RW_LP_BCH1K_ECC_DATA_LEN 1024
#define NFC_RW_LP_BCH704B_ECC_DATA_LEN 704
#define NFC_RW_LP_BCH512B_ECC_DATA_LEN 512
#define NFC_CMD_STRUCT_SIZE (sizeof(MV_NFC_CMD))
#define NFC_CMD_BUFF_SIZE(cmdb_0) ((cmdb_0 & NFC_CB0_LEN_OVRD_MASK) ? 16 : 12)
#define NFC_CMD_BUFF_ADDR (NFC_COMMAND_BUFF_0_REG_4PDMA)
#define NFC_DATA_BUFF_ADDR (NFC_DATA_BUFF_REG_4PDMA)
/**********/
/* Macros */
/**********/
#define ns_clk(ns, ns2clk) ((ns % ns2clk) ? (MV_U32)((ns/ns2clk)+1) : (MV_U32)(ns/ns2clk))
#define DBGPRINT(x) printk x
#define DBGLVL KERN_INFO
/***********/
/* Typedef */
/***********/
/* Flash Timing Parameters */
typedef struct {
/* Flash Timing */
MV_U32 tADL; /* Address to write data delay */
MV_U32 tCH; /* Enable signal hold time */
MV_U32 tCS; /* Enable signal setup time */
MV_U32 tWH; /* ND_nWE high duration */
MV_U32 tWP; /* ND_nWE pulse time */
MV_U32 tRH; /* ND_nRE high duration */
MV_U32 tRP; /* ND_nRE pulse width */
MV_U32 tR; /* ND_nWE high to ND_nRE low for read */
MV_U32 tWHR; /* ND_nWE high to ND_nRE low for status read */
MV_U32 tAR; /* ND_ALE low to ND_nRE low delay */
MV_U32 tRHW; /* ND_nRE high to ND_nWE low delay */
/* Physical Layout */
MV_U32 pgPrBlk; /* Pages per block */
MV_U32 pgSz; /* Page size */
MV_U32 oobSz; /* Page size */
MV_U32 blkNum; /* Number of blocks per device */
MV_U32 id; /* Manufacturer and device IDs */
MV_U32 seqDis; /* Enable/Disable sequential multipage read */
MV_8 *model; /* Flash Model string */
MV_U32 bb_page; /* Page containing bad block marking */
} MV_NFC_FLASH_INFO;
/* Flash command set */
typedef struct {
MV_U16 read1;
MV_U16 exitCacheRead;
MV_U16 cacheReadRand;
MV_U16 cacheReadSeq;
MV_U16 read2;
MV_U16 program;
MV_U16 readStatus;
MV_U16 readId;
MV_U16 erase;
MV_U16 multiplaneErase;
MV_U16 reset;
MV_U16 lock;
MV_U16 unlock;
MV_U16 lockStatus;
} MV_NFC_FLASH_CMD_SET;
/********/
/* Data */
/********/
/* Defined Flash Types */
MV_NFC_FLASH_INFO flashDeviceInfo[] = {
{ /* ST 1Gb 3V */
.tADL = 100, /* tADL, Address to write data delay */
.tCH = 5, /* tCH, Enable signal hold time */
.tCS = 20, /* tCS, Enable signal setup time */
.tWH = 10, /* tWH, ND_nWE high duration */
.tWP = 15, /* tWP, ND_nWE pulse time */
.tRH = 10, /* tRH, ND_nRE high duration */
.tRP = 15, /* tRP, ND_nRE pulse width */
.tR = 25121, /* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read - 25000+20+100+1 */
.tWHR = 60, /* tWHR, ND_nWE high to ND_nRE low delay for status read */
.tAR = 10, /* tAR, ND_ALE low to ND_nRE low delay */
.tRHW = 48, /* tRHW, ND_nRE high to ND_nWE low delay */
.pgPrBlk = 64, /* Pages per block - detected */
.pgSz = 2048, /* Page size */
.oobSz = 64, /* Spare size */
.blkNum = 1024, /* Number of blocks/sectors in the flash */
.id = 0xF120, /* Device ID 0xDevice,Vendor */
.model = "ST 1Gb 8bit",
.bb_page = 0, /* Manufacturer Bad block marking page in block */
},
{ /* ST 4Gb */
.tADL = 70, /* tADL, Address to write data delay */
.tCH = 5, /* tCH, Enable signal hold time */
.tCS = 20, /* tCS, Enable signal setup time */
.tWH = 10, /* tWH, ND_nWE high duration */
.tWP = 12, /* tWP, ND_nWE pulse time */
.tRH = 12, /* tRH, ND_nRE high duration */
.tRP = 12, /* tRP, ND_nRE pulse width */
.tR = 25121, /* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read - 25000+20+100+1 */
.tWHR = 60, /* tWHR, ND_nWE high to ND_nRE low delay for status read */
.tAR = 10, /* tAR, ND_ALE low to ND_nRE low delay */
.tRHW = 100, /* tRHW, ND_nRE high to ND_nWE low delay */
.pgPrBlk = 64, /* Pages per block - detected */
.pgSz = 2048, /* Page size */
.oobSz = 64, /* Spare size */
.blkNum = 2048, /* Number of blocks/sectors in the flash */
.id = 0xDC20, /* Device ID 0xDevice,Vendor */
.model = "NM 4Gb 8bit",
.bb_page = 0, /* Manufacturer Bad block marking page in block */
},
{ /* ST 4Gb */
.tADL = 70, /* tADL, Address to write data delay */
.tCH = 5, /* tCH, Enable signal hold time */
.tCS = 15, /* tCS, Enable signal setup time */
.tWH = 7, /* tWH, ND_nWE high duration */
.tWP = 10, /* tWP, ND_nWE pulse time */
.tRH = 7, /* tRH, ND_nRE high duration */
.tRP = 10, /* tRP, ND_nRE pulse width */
.tR = 26000, /* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read */
.tWHR = 60, /* tWHR, ND_nWE high to ND_nRE low delay for status read */
.tAR = 10, /* tAR, ND_ALE low to ND_nRE low delay */
.tRHW = 100, /* tRHW, ND_nRE high to ND_nWE low delay */
.pgPrBlk = 64, /* Pages per block - detected */
.pgSz = 2048, /* Page size */
.oobSz = 64, /* Spare size */
.blkNum = 4096, /* Number of blocks/sectors in the flash */
.id = 0xDC2C, /* Device ID 0xDevice,Vendor */
.model = "NM 4Gb 8bit",
.bb_page = 0, /* Manufacturer Bad block marking page in block */
},
{ /* ST 8Gb */
.tADL = 0, /* tADL, Address to write data delay */
.tCH = 5, /* tCH, Enable signal hold time */
.tCS = 20, /* tCS, Enable signal setup time */
.tWH = 12, /* tWH, ND_nWE high duration */
.tWP = 12, /* tWP, ND_nWE pulse time */
.tRH = 12, /* tRH, ND_nRE high duration */
.tRP = 12, /* tRP, ND_nRE pulse width */
.tR = 25121, /* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read - 25000+20+100+1 */
.tWHR = 60, /* tWHR, ND_nWE high to ND_nRE low delay for status read */
.tAR = 10, /* tAR, ND_ALE low to ND_nRE low delay */
.tRHW = 48, /* tRHW, ND_nRE high to ND_nWE low delay */
.pgPrBlk = 64, /* Pages per block - detected */
.pgSz = 2048, /* Page size */
.oobSz = 64, /* Spare size */
.blkNum = 2048, /* Number of blocks/sectors in the flash */
.id = 0xD320, /* Device ID 0xDevice,Vendor */
.model = "ST 8Gb 8bit",
.bb_page = 63, /* Manufacturer Bad block marking page in block */
},
{ /* ST 32Gb */
.tADL = 0, /* tADL, Address to write data delay */
.tCH = 5, /* tCH, Enable signal hold time */
.tCS = 20, /* tCS, Enable signal setup time */
.tWH = 10, /* tWH, ND_nWE high duration */
.tWP = 12, /* tWP, ND_nWE pulse time */
.tRH = 10, /* tRH, ND_nRE high duration */
.tRP = 12, /* tRP, ND_nRE pulse width */
.tR = 25121, /* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read - 25000+20+100+1 */
.tWHR = 80, /* tWHR, ND_nWE high to ND_nRE low delay for status read */
.tAR = 10, /* tAR, ND_ALE low to ND_nRE low delay */
.tRHW = 48, /* tRHW, ND_nRE high to ND_nWE low delay */
.pgPrBlk = 64, /* Pages per block - detected */
.pgSz = 4096, /* Page size */
.oobSz = 128, /* Spare size */
.blkNum = 16384, /* Number of blocks/sectors in the flash */
.id = 0xD520, /* Device ID 0xVendor,device */
.model = "ST 32Gb 8bit",
.bb_page = 63, /* Manufacturer Bad block marking page in block */
},
{ /* Samsung 16Gb */
.tADL = 90, /* tADL, Address to write data delay */
.tCH = 0, /* tCH, Enable signal hold time */
.tCS = 5, /* tCS, Enable signal setup time */
.tWH = 10, /* tWH, ND_nWE high duration */
.tWP = 12, /* tWP, ND_nWE pulse time */
.tRH = 12, /* tRH, ND_nRE high duration */
.tRP = 12, /* tRP, ND_nRE pulse width */
.tR = 49146, /* tR = data transfer from cell to register, maximum 60,000ns */
.tWHR = 66, /* tWHR, ND_nWE high to ND_nRE low delay for status read */
.tAR = 66, /* tAR, ND_ALE low to ND_nRE low delay */
.tRHW = 32, /* tRHW, ND_nRE high to ND_nWE low delay 32 clocks */
.pgPrBlk = 128, /* Pages per block - detected */
.pgSz = 2048, /* Page size */
.oobSz = 64, /* Spare size */
.blkNum = 8192, /* Number of blocks/sectors in the flash */
.id = 0xD5EC, /* Device ID 0xDevice,Vendor */
.model = "Samsung 16Gb 8bit",
.bb_page = 127, /* Manufacturer Bad block marking page in block */
},
{ /* Samsung 32Gb */
.tADL = 0, /* tADL, Address to write data delay */
.tCH = 5, /* tCH, Enable signal hold time */
.tCS = 20, /* tCS, Enable signal setup time */
.tWH = 10, /* tWH, ND_nWE high duration */
.tWP = 15, /* tWP, ND_nWE pulse time */
.tRH = 15, /* tRH, ND_nRE high duration */
.tRP = 15, /* tRP, ND_nRE pulse width */
.tR = 60000, /* tR = data transfer from cell to register, maximum 60,000ns */
.tWHR = 60, /* tWHR, ND_nWE high to ND_nRE low delay for status read */
.tAR = 10, /* tAR, ND_ALE low to ND_nRE low delay */
.tRHW = 48, /* tRHW, ND_nRE high to ND_nWE low delay */
.pgPrBlk = 128, /* Pages per block - detected */
.pgSz = 4096, /* Page size */
.oobSz = 128, /* Spare size */
.blkNum = 8192, /* Number of blocks/sectors in the flash */
.id = 0xD7EC, /* Device ID 0xDevice,Vendor */
.model = "Samsung 32Gb 8bit",
.bb_page = 127, /* Manufacturer Bad block marking page in block */
},
{ /* Micron 64Gb */
.tADL = 0, /* tADL, Address to write data delay */
.tCH = 20, /* tCH, Enable signal hold time */
.tCS = 20, /* tCS, Enable signal setup time */
.tWH = 45, /* tWH, ND_nWE high duration */
.tWP = 45, /* tWP, ND_nWE pulse time */
.tRH = 45, /* tRH, ND_nRE high duration */
.tRP = 45, /* tRP, ND_nRE pulse width */
.tR = 0, /* tR = data transfer from cell to register */
.tWHR = 90, /* tWHR, ND_nWE high to ND_nRE low delay for status read */
.tAR = 65, /* tAR, ND_ALE low to ND_nRE low delay */
.tRHW = 32, /* tRHW, ND_nRE high to ND_nWE low delay */
.pgPrBlk = 256, /* Pages per block - detected */
.pgSz = 8192, /* Page size */
.oobSz = 448, /* Spare size */
.blkNum = 4096, /* Number of blocks/sectors in the flash */
.id = 0x882C, /* Device ID 0xDevice,Vendor */
.model = "Micron 64Gb 8bit",
.bb_page = 0, /* Manufacturer Bad block marking page in block */
}
};
/* Defined Command set */
#define MV_NFC_FLASH_SP_CMD_SET_IDX 0
#define MV_NFC_FLASH_LP_CMD_SET_IDX 1
static MV_NFC_FLASH_CMD_SET flashCmdSet[] = {
{
.read1 = 0x0000,
.read2 = 0x0050,
.program = 0x1080,
.readStatus = 0x0070,
.readId = 0x0090,
.erase = 0xD060,
.multiplaneErase = 0xD160,
.reset = 0x00FF,
.lock = 0x002A,
.unlock = 0x2423,
.lockStatus = 0x007A,
},
{
.read1 = 0x3000,
.exitCacheRead = 0x003f,
.cacheReadRand = 0x3100,
.cacheReadSeq = 0x0031,
.read2 = 0x0050,
.program = 0x1080,
.readStatus = 0x0070,
.readId = 0x0090,
.erase = 0xD060,
.multiplaneErase = 0xD160,
.reset = 0x00FF,
.lock = 0x002A,
.unlock = 0x2423,
.lockStatus = 0x007A,
}
};
#undef MV_NFC_REG_DBG
#ifdef MV_NFC_REG_DBG
MV_U32 mvNfcDbgFlag = 1;
MV_U32 nfc_dbg_read(MV_U32 addr)
{
MV_U32 reg = MV_MEMIO_LE32_READ((addr));
if (mvNfcDbgFlag)
mvOsPrintf("NFC read 0x%08x = %08x\n", addr, reg);
return reg;
}
MV_VOID nfc_dbg_write(MV_U32 addr, MV_U32 val)
{
MV_MEMIO_LE32_WRITE((addr), (val));
if (mvNfcDbgFlag)
mvOsPrintf("NFC write 0x%08x = %08x\n", addr, val);
}
#undef MV_REG_READ
#undef MV_REG_WRITE
#define MV_REG_READ(x) nfc_dbg_read(x)
#define MV_REG_WRITE(x, y) nfc_dbg_write(x, y)
#endif
/**************/
/* Prototypes */
/**************/
static MV_STATUS mvDfcWait4Complete(MV_U32 statMask, MV_U32 usec);
static MV_STATUS mvNfcReadIdNative(MV_NFC_CHIP_SEL cs, MV_U16 *id);
static MV_STATUS mvNfcTimingSet(MV_U32 tclk, MV_NFC_FLASH_INFO *flInfo);
static MV_U32 mvNfcColBits(MV_U32 pg_size);
#ifdef CONFIG_MTD_NAND_NFC_INIT_RESET
static MV_STATUS mvNfcReset(void);
#endif
/*******************************************************************************
* mvNfcInit
*
* DESCRIPTION:
* Initialize the NAND controller unit, and perform a detection of the
* attached NAND device.
*
* INPUT:
* nfcInfo - Flash information parameters.
*
* OUTPUT:
* nfcCtrl - Nand control and status information to be held by the user
* and passed to all other APIs.
*
* RETURN:
* MV_OK - On success,
* MV_BAD_PARAM - The required ECC mode not supported by flash.
* MV_NOT_SUPPORTED- The underlying flash device is not supported by HAL.
* MV_TIMEOUT - Error accessing the underlying flahs device.
* MV_FAIL - On failure
*******************************************************************************/
MV_STATUS mvNfcInit(MV_NFC_INFO *nfcInfo, MV_NFC_CTRL *nfcCtrl)
{
MV_U32 ctrl_reg;
MV_STATUS ret;
MV_U16 read_id = 0;
MV_U32 i;
/* Initial register values */
ctrl_reg = 0;
/* make sure ECC is disabled at this point - will be enabled only when issuing certain commands */
MV_REG_BIT_RESET(NFC_CONTROL_REG, NFC_CTRL_ECC_EN_MASK);
if (nfcInfo->eccMode != MV_NFC_ECC_HAMMING)
MV_REG_BIT_RESET(NFC_ECC_CONTROL_REG, NFC_ECC_BCH_EN_MASK);
if ((nfcInfo->eccMode == MV_NFC_ECC_BCH_1K) ||
(nfcInfo->eccMode == MV_NFC_ECC_BCH_704B) || (nfcInfo->eccMode == MV_NFC_ECC_BCH_512B)) {
/* Disable spare */
ctrl_reg &= ~NFC_CTRL_SPARE_EN_MASK;
} else {
/* Enable spare */
ctrl_reg |= NFC_CTRL_SPARE_EN_MASK;
}
ctrl_reg &= ~NFC_CTRL_ECC_EN_MASK;
/* Configure flash interface */
if (nfcInfo->ifMode == MV_NFC_IF_1X16) {
nfcCtrl->flashWidth = 16;
nfcCtrl->dfcWidth = 16;
ctrl_reg |= (NFC_CTRL_DWIDTH_M_MASK | NFC_CTRL_DWIDTH_C_MASK);
} else if (nfcInfo->ifMode == MV_NFC_IF_2X8) {
nfcCtrl->flashWidth = 8;
nfcCtrl->dfcWidth = 16;
ctrl_reg |= NFC_CTRL_DWIDTH_C_MASK;
} else {
nfcCtrl->flashWidth = 8;
nfcCtrl->dfcWidth = 8;
}
/* Configure initial READ-ID byte count */
ctrl_reg |= (0x2 << NFC_CTRL_RD_ID_CNT_OFFS);
/* Configure the Arbiter */
ctrl_reg |= NFC_CTRL_ND_ARB_EN_MASK;
/* Write registers before device detection */
MV_REG_WRITE(NFC_CONTROL_REG, ctrl_reg);
#ifdef CONFIG_MTD_NAND_NFC_INIT_RESET
/* reset the device */
ret = mvNfcReset();
if (ret != MV_OK)
return ret;
#endif
/* Read the device ID */
ret = mvNfcReadIdNative(nfcCtrl->currCs, &read_id);
if (ret != MV_OK)
return ret;
/* Look for device ID in knwon device table */
for (i = 0; i < (sizeof(flashDeviceInfo) / sizeof(MV_NFC_FLASH_INFO)); i++) {
if (flashDeviceInfo[i].id == read_id)
break;
}
if (i == (sizeof(flashDeviceInfo) / sizeof(MV_NFC_FLASH_INFO)))
return MV_NOT_SUPPORTED;
else
nfcCtrl->flashIdx = i;
/* Configure the command set based on page size */
if (flashDeviceInfo[i].pgSz < MV_NFC_2KB_PAGE)
nfcCtrl->cmdsetIdx = MV_NFC_FLASH_SP_CMD_SET_IDX;
else
nfcCtrl->cmdsetIdx = MV_NFC_FLASH_LP_CMD_SET_IDX;
/* calculate Timing parameters */
ret = mvNfcTimingSet(nfcInfo->tclk, &flashDeviceInfo[i]);
if (ret != MV_OK)
return ret;
/* Configure the control register based on the device detected */
ctrl_reg = MV_REG_READ(NFC_CONTROL_REG);
/* Configure DMA */
if (nfcInfo->ioMode == MV_NFC_PDMA_ACCESS)
ctrl_reg |= NFC_CTRL_DMA_EN_MASK;
else
ctrl_reg &= ~NFC_CTRL_DMA_EN_MASK;
/* Configure Page size */
ctrl_reg &= ~NFC_CTRL_PAGE_SZ_MASK;
switch (flashDeviceInfo[i].pgSz) {
case MV_NFC_512B_PAGE:
ctrl_reg |= NFC_CTRL_PAGE_SZ_512B;
break;
case MV_NFC_2KB_PAGE:
case MV_NFC_4KB_PAGE:
case MV_NFC_8KB_PAGE:
ctrl_reg |= NFC_CTRL_PAGE_SZ_2KB;
break;
default:
return MV_BAD_PARAM;
}
/* Disable sequential read if indicated */
if (flashDeviceInfo[i].seqDis)
ctrl_reg |= NFC_CTRL_SEQ_DIS_MASK;
else
ctrl_reg &= ~NFC_CTRL_SEQ_DIS_MASK;
/* Configure the READ-ID count and row address start based on page size */
ctrl_reg &= ~(NFC_CTRL_RD_ID_CNT_MASK | NFC_CTRL_RA_START_MASK);
if (flashDeviceInfo[i].pgSz >= MV_NFC_2KB_PAGE) {
ctrl_reg |= NFC_CTRL_RD_ID_CNT_LP;
ctrl_reg |= NFC_CTRL_RA_START_MASK;
} else {
ctrl_reg |= NFC_CTRL_RD_ID_CNT_SP;
}
/* Confiugre pages per block */
ctrl_reg &= ~NFC_CTRL_PG_PER_BLK_MASK;
switch (flashDeviceInfo[i].pgPrBlk) {
case 32:
ctrl_reg |= NFC_CTRL_PG_PER_BLK_32;
break;
case 64:
ctrl_reg |= NFC_CTRL_PG_PER_BLK_64;
break;
case 128:
ctrl_reg |= NFC_CTRL_PG_PER_BLK_128;
break;
case 256:
ctrl_reg |= NFC_CTRL_PG_PER_BLK_256;
break;
default:
return MV_BAD_PARAM;
}
/* Write the updated control register */
MV_REG_WRITE(NFC_CONTROL_REG, ctrl_reg);
#ifdef MV_INCLUDE_PDMA
/* DMA resource allocation */
if (nfcInfo->ioMode == MV_NFC_PDMA_ACCESS) {
/* Allocate command buffer */
nfcCtrl->cmdBuff.bufVirtPtr =
mvOsIoUncachedMalloc(nfcInfo->osHandle, (NFC_CMD_STRUCT_SIZE * MV_NFC_MAX_DESC_CHAIN),
&nfcCtrl->cmdBuff.bufPhysAddr, &nfcCtrl->cmdBuff.memHandle);
if (nfcCtrl->cmdBuff.bufVirtPtr == NULL)
return MV_OUT_OF_CPU_MEM;
nfcCtrl->cmdBuff.bufSize = (NFC_CMD_STRUCT_SIZE * MV_NFC_MAX_DESC_CHAIN);
nfcCtrl->cmdBuff.dataSize = (NFC_CMD_STRUCT_SIZE * MV_NFC_MAX_DESC_CHAIN);
/* Allocate command DMA descriptors */
nfcCtrl->cmdDescBuff.bufVirtPtr =
mvOsIoUncachedMalloc(nfcInfo->osHandle, (MV_PDMA_DESC_SIZE * (MV_NFC_MAX_DESC_CHAIN + 1)),
&nfcCtrl->cmdDescBuff.bufPhysAddr, &nfcCtrl->cmdDescBuff.memHandle);
if (nfcCtrl->cmdDescBuff.bufVirtPtr == NULL)
return MV_OUT_OF_CPU_MEM;
/* verify allignment to 128bits */
if ((MV_U32) nfcCtrl->cmdDescBuff.bufVirtPtr & 0xF) {
nfcCtrl->cmdDescBuff.bufVirtPtr =
(MV_U8 *) (((MV_U32) nfcCtrl->cmdDescBuff.bufVirtPtr & ~0xF) + MV_PDMA_DESC_SIZE);
nfcCtrl->cmdDescBuff.bufPhysAddr =
((nfcCtrl->cmdDescBuff.bufPhysAddr & ~0xF) + MV_PDMA_DESC_SIZE);
}
nfcCtrl->cmdDescBuff.bufSize = (MV_PDMA_DESC_SIZE * MV_NFC_MAX_DESC_CHAIN);
nfcCtrl->cmdDescBuff.dataSize = (MV_PDMA_DESC_SIZE * MV_NFC_MAX_DESC_CHAIN);
/* Allocate data DMA descriptors */
nfcCtrl->dataDescBuff.bufVirtPtr =
mvOsIoUncachedMalloc(nfcInfo->osHandle, (MV_PDMA_DESC_SIZE * (MV_NFC_MAX_DESC_CHAIN + 1)),
&nfcCtrl->dataDescBuff.bufPhysAddr,
&nfcCtrl->dataDescBuff.memHandle);
if (nfcCtrl->dataDescBuff.bufVirtPtr == NULL)
return MV_OUT_OF_CPU_MEM;
/* verify allignment to 128bits */
if ((MV_U32) nfcCtrl->dataDescBuff.bufVirtPtr & 0xF) {
nfcCtrl->dataDescBuff.bufVirtPtr =
(MV_U8 *) (((MV_U32) nfcCtrl->dataDescBuff.bufVirtPtr & ~0xF) + MV_PDMA_DESC_SIZE);
nfcCtrl->dataDescBuff.bufPhysAddr =
((nfcCtrl->dataDescBuff.bufPhysAddr & ~0xF) + MV_PDMA_DESC_SIZE);
}
nfcCtrl->dataDescBuff.bufSize = (MV_PDMA_DESC_SIZE * MV_NFC_MAX_DESC_CHAIN);
nfcCtrl->dataDescBuff.dataSize = (MV_PDMA_DESC_SIZE * MV_NFC_MAX_DESC_CHAIN);
/* Allocate Data DMA channel */
if (mvPdmaChanAlloc(MV_PDMA_NAND_DATA, nfcInfo->dataPdmaIntMask, &nfcCtrl->dataChanHndl) != MV_OK)
return MV_NO_RESOURCE;
/* Allocate Command DMA channel */
if (mvPdmaChanAlloc(MV_PDMA_NAND_COMMAND, nfcInfo->cmdPdmaIntMask, &nfcCtrl->cmdChanHndl) != MV_OK)
return MV_NO_RESOURCE;
}
#endif
/* Initialize remaining fields in the CTRL structure */
nfcCtrl->autoStatusRead = nfcInfo->autoStatusRead;
nfcCtrl->readyBypass = nfcInfo->readyBypass;
nfcCtrl->ioMode = nfcInfo->ioMode;
nfcCtrl->eccMode = nfcInfo->eccMode;
nfcCtrl->ifMode = nfcInfo->ifMode;
nfcCtrl->currCs = MV_NFC_CS_NONE;
nfcCtrl->regsPhysAddr = nfcInfo->regsPhysAddr;
#ifdef MV_INCLUDE_PDMA
nfcCtrl->dataPdmaIntMask = nfcInfo->dataPdmaIntMask;
nfcCtrl->cmdPdmaIntMask = nfcInfo->cmdPdmaIntMask;
#endif
return MV_OK;
}
/*******************************************************************************
* mvNfcSelectChip
*
* DESCRIPTION:
* Set the currently active chip for next commands.
*
* INPUT:
* nfcCtrl - Nand control structure.
* chip - The chip number to operate on.
*
* OUTPUT:
* None.
*
* RETURN:
* MV_OK - On success,
* MV_FAIL - On failure
*******************************************************************************/
MV_STATUS mvNfcSelectChip(MV_NFC_CTRL *nfcCtrl, MV_NFC_CHIP_SEL chip)
{
nfcCtrl->currCs = chip;
return MV_OK;
}
/*******************************************************************************
* mvNfcDataLength
*
* DESCRIPTION:
* Get the length of data based on the NFC configuration
*
* INPUT:
* nfcCtrl - Nand control structure.
* cmd - Command to be executed
*
* OUTPUT:
* data_len - length of data to be transfered
*
* RETURN:
* MV_OK - On success,
* MV_FAIL - On failure
*******************************************************************************/
MV_STATUS mvNfcDataLength(MV_NFC_CTRL *nfcCtrl, MV_NFC_CMD_TYPE cmd, MV_U32 *data_len)
{
/* Decide read data size based on page size */
if (flashDeviceInfo[nfcCtrl->flashIdx].pgSz < MV_NFC_2KB_PAGE) { /* Small Page */
if (nfcCtrl->ifMode == MV_NFC_IF_2X8) {
if (nfcCtrl->eccMode == MV_NFC_ECC_HAMMING)
*data_len = NFC_RW_SP_G_HMNG_ECC_DATA_LEN;
else /* No ECC */
*data_len = NFC_RW_SP_G_NO_ECC_DATA_LEN;
} else {
if (nfcCtrl->eccMode == MV_NFC_ECC_HAMMING)
*data_len = NFC_RW_SP_HMNG_ECC_DATA_LEN;
else /* No ECC */
*data_len = NFC_RW_SP_NO_ECC_DATA_LEN;
}
} else { /* Large Page */
if (nfcCtrl->ifMode == MV_NFC_IF_2X8) {
if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_2K)
*data_len = NFC_RW_LP_G_BCH_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_1K)
*data_len = NFC_RW_LP_BCH1K_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_704B)
*data_len = NFC_RW_LP_BCH704B_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_512B)
*data_len = NFC_RW_LP_BCH512B_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_HAMMING)
*data_len = NFC_RW_LP_G_HMNG_ECC_DATA_LEN;
else /* No ECC */
*data_len = NFC_RW_LP_G_NO_ECC_DATA_LEN;
} else {
if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_2K)
*data_len = NFC_RW_LP_BCH_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_1K)
*data_len = NFC_RW_LP_BCH1K_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_704B)
*data_len = NFC_RW_LP_BCH704B_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_512B)
*data_len = NFC_RW_LP_BCH512B_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_HAMMING)
*data_len = NFC_RW_LP_HMNG_ECC_DATA_LEN;
else /* No ECC */
*data_len = NFC_RW_LP_NO_ECC_DATA_LEN;
}
}
return MV_OK;
}
/*******************************************************************************
* mvNfcTransferDataLength
*
* DESCRIPTION:
* Get the length of data to be transfered based on the command type and
* NFC configuration
*
* INPUT:
* nfcCtrl - Nand control structure.
* cmd - Command to be executed
*
* OUTPUT:
* data_len - length of data to be transfered
*
* RETURN:
* MV_OK - On success,
* MV_FAIL - On failure
*******************************************************************************/
MV_STATUS mvNfcTransferDataLength(MV_NFC_CTRL *nfcCtrl, MV_NFC_CMD_TYPE cmd, MV_U32 *data_len)
{
switch (cmd) {
case MV_NFC_CMD_READ_ID:
if (nfcCtrl->ioMode == MV_NFC_PDMA_ACCESS)
*data_len = NFC_READ_ID_PDMA_DATA_LEN;
else
*data_len = NFC_READ_ID_PIO_DATA_LEN;
break;
case MV_NFC_CMD_READ_STATUS:
if (nfcCtrl->ioMode == MV_NFC_PDMA_ACCESS)
*data_len = NFC_READ_STATUS_PDMA_DATA_LEN;
else
*data_len = NFC_READ_STATUS_PIO_DATA_LEN;
break;
case MV_NFC_CMD_READ_MONOLITHIC: /* Read a single 512B or 2KB page */
case MV_NFC_CMD_READ_MULTIPLE:
case MV_NFC_CMD_READ_NAKED:
case MV_NFC_CMD_READ_LAST_NAKED:
case MV_NFC_CMD_READ_DISPATCH:
case MV_NFC_CMD_WRITE_MONOLITHIC: /* Program a single page of 512B or 2KB */
case MV_NFC_CMD_WRITE_MULTIPLE:
case MV_NFC_CMD_WRITE_NAKED:
case MV_NFC_CMD_WRITE_LAST_NAKED:
case MV_NFC_CMD_WRITE_DISPATCH:
case MV_NFC_CMD_EXIT_CACHE_READ:
case MV_NFC_CMD_CACHE_READ_SEQ:
case MV_NFC_CMD_CACHE_READ_START:
if (nfcCtrl->ioMode == MV_NFC_PDMA_ACCESS) {
/* Decide read data size based on page size */
if (flashDeviceInfo[nfcCtrl->flashIdx].pgSz < MV_NFC_2KB_PAGE) { /* Small Page */
*data_len = NFC_RW_SP_PDMA_DATA_LEN;
} else { /* Large Page */
if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_2K)
*data_len = NFC_RW_LP_BCH_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_1K)
*data_len = NFC_RW_LP_BCH1K_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_704B)
*data_len = NFC_RW_LP_BCH704B_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_512B)
*data_len = NFC_RW_LP_BCH512B_ECC_DATA_LEN;
else /* Hamming and No-Ecc */
*data_len = NFC_RW_LP_PDMA_DATA_LEN;
}
} else { /* PIO mode */
/* Decide read data size based on page size */
if (flashDeviceInfo[nfcCtrl->flashIdx].pgSz < MV_NFC_2KB_PAGE) { /* Small Page */
if (nfcCtrl->ifMode == MV_NFC_IF_2X8) {
if (nfcCtrl->eccMode == MV_NFC_ECC_HAMMING)
*data_len = NFC_RW_SP_G_HMNG_ECC_DATA_LEN;
else /* No ECC */
*data_len = NFC_RW_SP_G_NO_ECC_DATA_LEN;
} else {
if (nfcCtrl->eccMode == MV_NFC_ECC_HAMMING)
*data_len = NFC_RW_SP_HMNG_ECC_DATA_LEN;
else /* No ECC */
*data_len = NFC_RW_SP_NO_ECC_DATA_LEN;
}
} else { /* Large Page */
if (nfcCtrl->ifMode == MV_NFC_IF_2X8) {
if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_2K)
*data_len = NFC_RW_LP_G_BCH_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_1K)
*data_len = NFC_RW_LP_BCH1K_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_704B)
*data_len = NFC_RW_LP_BCH704B_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_512B)
*data_len = NFC_RW_LP_BCH512B_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_HAMMING)
*data_len = NFC_RW_LP_G_HMNG_ECC_DATA_LEN;
else /* No ECC */
*data_len = NFC_RW_LP_G_NO_ECC_DATA_LEN;
} else {
if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_2K)
*data_len = NFC_RW_LP_BCH_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_1K)
*data_len = NFC_RW_LP_BCH1K_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_704B)
*data_len = NFC_RW_LP_BCH704B_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_BCH_512B)
*data_len = NFC_RW_LP_BCH512B_ECC_DATA_LEN;
else if (nfcCtrl->eccMode == MV_NFC_ECC_HAMMING)
*data_len = NFC_RW_LP_HMNG_ECC_DATA_LEN;
else /* No ECC */
*data_len = NFC_RW_LP_NO_ECC_DATA_LEN;
}
}
}
break;
case MV_NFC_CMD_ERASE:
case MV_NFC_CMD_MULTIPLANE_ERASE:
case MV_NFC_CMD_RESET:
case MV_NFC_CMD_WRITE_DISPATCH_START:
case MV_NFC_CMD_WRITE_DISPATCH_END:
return MV_BAD_PARAM;
default:
return MV_BAD_PARAM;
};
return MV_OK;
}
/*******************************************************************************
* mvNfcBuildCommand
*
* DESCRIPTION:
* Build the command buffer
*
* INPUT:
* nfcCtrl - Nand control structure.
* cmd - Command to be executed
* cmdb - Command buffer cmdb[0:3] to fill
*
* OUTPUT:
* cmdb - Command buffer filled
*
* RETURN:
* None
*******************************************************************************/
static MV_STATUS mvNfcBuildCommand(MV_NFC_CTRL *nfcCtrl, MV_NFC_MULTI_CMD *descInfo, MV_U32 *cmdb)
{
cmdb[0] = 0;
cmdb[1] = 0;
cmdb[2] = 0;
cmdb[3] = 0;
if (nfcCtrl->autoStatusRead)
cmdb[0] |= NFC_CB0_AUTO_RS_MASK;
if ((nfcCtrl->currCs == MV_NFC_CS_1) || (nfcCtrl->currCs == MV_NFC_CS_3))
cmdb[0] |= NFC_CB0_CSEL_MASK;
if ((nfcCtrl->currCs == MV_NFC_CS_2) || (nfcCtrl->currCs == MV_NFC_CS_3))
cmdb[2] |= NFC_CB2_CS_2_3_SELECT_MASK;
if (nfcCtrl->readyBypass)
cmdb[0] |= NFC_CB0_RDY_BYP_MASK;
switch (descInfo->cmd) {
case MV_NFC_CMD_READ_ID:
cmdb[0] |= (flashCmdSet[nfcCtrl->cmdsetIdx].readId & (NFC_CB0_CMD1_MASK | NFC_CB0_CMD2_MASK));
cmdb[0] |= ((NFC_READ_ID_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
cmdb[0] |= NFC_CB0_CMD_TYPE_READ_ID;
break;
case MV_NFC_CMD_READ_STATUS:
cmdb[0] |= (flashCmdSet[nfcCtrl->cmdsetIdx].readStatus & (NFC_CB0_CMD1_MASK | NFC_CB0_CMD2_MASK));
cmdb[0] |= NFC_CB0_CMD_TYPE_STATUS;
break;
case MV_NFC_CMD_ERASE:
case MV_NFC_CMD_MULTIPLANE_ERASE:
if (descInfo->cmd == MV_NFC_CMD_ERASE)
cmdb[0] |= (flashCmdSet[nfcCtrl->cmdsetIdx].erase & (NFC_CB0_CMD1_MASK | NFC_CB0_CMD2_MASK));
if (descInfo->cmd == MV_NFC_CMD_MULTIPLANE_ERASE)
cmdb[0] |=
(flashCmdSet[nfcCtrl->cmdsetIdx].multiplaneErase & (NFC_CB0_CMD1_MASK | NFC_CB0_CMD2_MASK));
cmdb[0] |= ((NFC_ERASE_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
cmdb[0] |= NFC_CB0_DBC_MASK;
cmdb[0] |= NFC_CB0_CMD_TYPE_ERASE;
cmdb[1] |= (descInfo->pageAddr & NFC_BLOCK_ADDR_BITS);
break;
case MV_NFC_CMD_RESET:
cmdb[0] |= (flashCmdSet[nfcCtrl->cmdsetIdx].reset & (NFC_CB0_CMD1_MASK | NFC_CB0_CMD2_MASK));
cmdb[0] |= NFC_CB0_CMD_TYPE_RESET;
break;
case MV_NFC_CMD_CACHE_READ_SEQ:
cmdb[0] = (flashCmdSet[nfcCtrl->cmdsetIdx].cacheReadSeq & (NFC_CB0_CMD1_MASK | NFC_CB0_CMD2_MASK));
break;
case MV_NFC_CMD_CACHE_READ_RAND:
cmdb[0] = (flashCmdSet[nfcCtrl->cmdsetIdx].cacheReadRand & (NFC_CB0_CMD1_MASK | NFC_CB0_CMD2_MASK));
if (flashDeviceInfo[nfcCtrl->flashIdx].pgSz < MV_NFC_2KB_PAGE) {
cmdb[1] |= ((descInfo->pageAddr << NFC_SP_PG_OFFS) & NFC_SP_PG_MASK);
if (descInfo->pageAddr & ~NFC_SP_PG_MASK)
cmdb[0] |=
((NFC_SP_BIG_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
else
cmdb[0] |= ((NFC_SP_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
} else {
cmdb[0] |= ((NFC_LP_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
cmdb[0] |= NFC_CB0_DBC_MASK;
cmdb[1] |= ((descInfo->pageAddr << NFC_LP_PG_OFFS) & NFC_LP_PG_MASK);
cmdb[2] |= (descInfo->pageAddr >> (32 - NFC_LP_PG_OFFS));
}
cmdb[0] |= NFC_CB0_CMD_TYPE_READ;
break;
case MV_NFC_CMD_EXIT_CACHE_READ:
cmdb[0] |= (flashCmdSet[nfcCtrl->cmdsetIdx].exitCacheRead & (NFC_CB0_CMD1_MASK | NFC_CB0_CMD2_MASK));
break;
case MV_NFC_CMD_CACHE_READ_START:
cmdb[0] |= (flashCmdSet[nfcCtrl->cmdsetIdx].read1 & (NFC_CB0_CMD1_MASK | NFC_CB0_CMD2_MASK));
if (flashDeviceInfo[nfcCtrl->flashIdx].pgSz < MV_NFC_2KB_PAGE) {
cmdb[1] |= ((descInfo->pageAddr << NFC_SP_PG_OFFS) & NFC_SP_PG_MASK);
if (descInfo->pageAddr & ~NFC_SP_PG_MASK)
cmdb[0] |=
((NFC_SP_BIG_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
else
cmdb[0] |= ((NFC_SP_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
} else {
cmdb[0] |= ((NFC_LP_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
cmdb[0] |= NFC_CB0_DBC_MASK;
cmdb[1] |= ((descInfo->pageAddr << NFC_LP_PG_OFFS) & NFC_LP_PG_MASK);
cmdb[2] |= (descInfo->pageAddr >> (32 - NFC_LP_PG_OFFS));
}
cmdb[0] |= NFC_CB0_CMD_TYPE_READ;
cmdb[0] |= NFC_CB0_LEN_OVRD_MASK;
break;
case MV_NFC_CMD_READ_MONOLITHIC: /* Read a single 512B or 2KB page */
case MV_NFC_CMD_READ_MULTIPLE:
case MV_NFC_CMD_READ_NAKED:
case MV_NFC_CMD_READ_LAST_NAKED:
case MV_NFC_CMD_READ_DISPATCH:
cmdb[0] |= (flashCmdSet[nfcCtrl->cmdsetIdx].read1 & (NFC_CB0_CMD1_MASK | NFC_CB0_CMD2_MASK));
if (flashDeviceInfo[nfcCtrl->flashIdx].pgSz < MV_NFC_2KB_PAGE) {
cmdb[1] |= ((descInfo->pageAddr << NFC_SP_PG_OFFS) & NFC_SP_PG_MASK);
if (descInfo->pageAddr & ~NFC_SP_PG_MASK)
cmdb[0] |=
((NFC_SP_BIG_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
else
cmdb[0] |= ((NFC_SP_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
} else {
cmdb[0] |= ((NFC_LP_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
cmdb[0] |= NFC_CB0_DBC_MASK;
cmdb[1] |= ((descInfo->pageAddr << NFC_LP_PG_OFFS) & NFC_LP_PG_MASK);
cmdb[2] |= (descInfo->pageAddr >> (32 - NFC_LP_PG_OFFS));
}
cmdb[0] |= NFC_CB0_CMD_TYPE_READ;
if (descInfo->length) {
cmdb[0] |= NFC_CB0_LEN_OVRD_MASK;
cmdb[3] |= (descInfo->length & 0xFFFF);
}
/* Check for extended command syntax */
switch (descInfo->cmd) {
case MV_NFC_CMD_READ_MULTIPLE:
cmdb[0] |= NFC_CB0_CMD_XTYPE_MULTIPLE;
break;
case MV_NFC_CMD_READ_NAKED:
cmdb[0] |= NFC_CB0_CMD_XTYPE_NAKED;
break;
case MV_NFC_CMD_READ_LAST_NAKED:
cmdb[0] |= NFC_CB0_CMD_XTYPE_LAST_NAKED;
break;
case MV_NFC_CMD_READ_DISPATCH:
cmdb[0] |= NFC_CB0_CMD_XTYPE_DISPATCH;
break;
default:
break;
};
break;
case MV_NFC_CMD_WRITE_MONOLITHIC: /* Program a single page of 512B or 2KB */
case MV_NFC_CMD_WRITE_MULTIPLE:
/*case MV_NFC_CMD_WRITE_NAKED: */
case MV_NFC_CMD_WRITE_LAST_NAKED:
case MV_NFC_CMD_WRITE_DISPATCH:
cmdb[0] |= (flashCmdSet[nfcCtrl->cmdsetIdx].program & (NFC_CB0_CMD1_MASK | NFC_CB0_CMD2_MASK));
if (flashDeviceInfo[nfcCtrl->flashIdx].pgSz < MV_NFC_2KB_PAGE) {
if (descInfo->pageAddr & ~NFC_SP_PG_MASK)
cmdb[0] |=
((NFC_SP_BIG_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
else
cmdb[0] |= ((NFC_SP_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
cmdb[1] |= ((descInfo->pageAddr << NFC_SP_PG_OFFS) & NFC_SP_PG_MASK);
} else {
cmdb[0] |= ((NFC_LP_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
cmdb[1] |= ((descInfo->pageAddr << NFC_LP_PG_OFFS) & NFC_LP_PG_MASK);
cmdb[2] |= (descInfo->pageAddr >> (32 - NFC_LP_PG_OFFS));
}
cmdb[0] |= NFC_CB0_DBC_MASK;
cmdb[0] |= NFC_CB0_CMD_TYPE_WRITE;
/* Check for extended syntax */
switch (descInfo->cmd) {
case MV_NFC_CMD_WRITE_MULTIPLE:
cmdb[0] |= NFC_CB0_CMD_XTYPE_MULTIPLE;
break;
case MV_NFC_CMD_WRITE_NAKED:
cmdb[0] |= NFC_CB0_CMD_XTYPE_NAKED;
break;
case MV_NFC_CMD_WRITE_LAST_NAKED:
cmdb[0] |= NFC_CB0_CMD_XTYPE_LAST_NAKED;
break;
case MV_NFC_CMD_WRITE_DISPATCH:
cmdb[0] |= NFC_CB0_CMD_XTYPE_DISPATCH;
break;
default:
break;
};
break;
case MV_NFC_CMD_WRITE_DISPATCH_START:
cmdb[0] |= (flashCmdSet[nfcCtrl->cmdsetIdx].program & NFC_CB0_CMD1_MASK);
if (flashDeviceInfo[nfcCtrl->flashIdx].pgSz < MV_NFC_2KB_PAGE) {
if (descInfo->pageAddr & ~NFC_SP_PG_MASK)
cmdb[0] |=
((NFC_SP_BIG_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
else
cmdb[0] |= ((NFC_SP_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
cmdb[1] |= ((descInfo->pageAddr << NFC_SP_PG_OFFS) & NFC_SP_PG_MASK);
} else {
cmdb[0] |= ((NFC_LP_READ_ADDR_LEN << NFC_CB0_ADDR_CYC_OFFS) & NFC_CB0_ADDR_CYC_MASK);
cmdb[1] |= ((descInfo->pageAddr << NFC_LP_PG_OFFS) & NFC_LP_PG_MASK);
cmdb[2] |= (descInfo->pageAddr >> (32 - NFC_LP_PG_OFFS));
}
cmdb[0] |= NFC_CB0_CMD_TYPE_WRITE;
cmdb[0] |= NFC_CB0_CMD_XTYPE_DISPATCH;
break;
case MV_NFC_CMD_WRITE_NAKED:
cmdb[0] |= NFC_CB0_CMD_TYPE_WRITE;
cmdb[0] |= NFC_CB0_CMD_XTYPE_NAKED;
if (descInfo->length) {
cmdb[0] |= NFC_CB0_LEN_OVRD_MASK;
cmdb[3] |= (descInfo->length & 0xFFFF);
}
break;
case MV_NFC_CMD_WRITE_DISPATCH_END:
cmdb[0] |= ((flashCmdSet[nfcCtrl->cmdsetIdx].program >> 8) & NFC_CB0_CMD1_MASK);
cmdb[0] |= NFC_CB0_CMD_TYPE_WRITE;
cmdb[0] |= NFC_CB0_CMD_XTYPE_DISPATCH;
break;
default:
return MV_BAD_PARAM;
}
/* update page count */
cmdb[2] |= (((descInfo->pageCount - 1) << NFC_PG_CNT_OFFS) & NFC_PG_CNT_MASK);
return MV_OK;
}
#ifdef MV_INCLUDE_PDMA
/*******************************************************************************
* mvNfcCommandMultiple
*
* DESCRIPTION:
* Issue a command to the NAND controller.
*
* INPUT:
* nfcCtrl - Nand control structure.
* cmd - The command to issue.
* pageAddr - The page number to perform the command on (If the command
* requires a flash offset), block address in erase.
*
* OUTPUT:
* None.
*
* RETURN:
* MV_OK - On success,
* MV_TIMEOUT - Timeout while waiting for command request.
* MV_FAIL - On failure
*******************************************************************************/
MV_STATUS mvNfcCommandMultiple(MV_NFC_CTRL *nfcCtrl, MV_NFC_MULTI_CMD *descInfo, MV_U32 descCnt)
{
MV_U32 reg, i, buff;
MV_U32 errCode = MV_OK;
MV_U32 cmdb[4];
MV_NFC_CMD *cmdVirtPtr = (MV_NFC_CMD *) nfcCtrl->cmdBuff.bufVirtPtr;
MV_NFC_CMD *cmdPhysPtr = (MV_NFC_CMD *) nfcCtrl->cmdBuff.bufPhysAddr;
MV_PDMA_DESC *cmdDescVirtPtr = (MV_PDMA_DESC *) nfcCtrl->cmdDescBuff.bufVirtPtr;
MV_PDMA_DESC *cmdDescPhysPtr = (MV_PDMA_DESC *) nfcCtrl->cmdDescBuff.bufPhysAddr;
MV_PDMA_DESC *dataDescVirtPtr = (MV_PDMA_DESC *) nfcCtrl->dataDescBuff.bufVirtPtr;
MV_PDMA_DESC *dataDescPhysPtr = (MV_PDMA_DESC *) nfcCtrl->dataDescBuff.bufPhysAddr;
MV_U32 xferLen;
MV_U32 dataDescCount = 0;
MV_U32 nPage;
MV_U32 timeout = 10000;
MV_STATUS ret;
/* Check MAX descriptor count */
if (descCnt > MV_NFC_MAX_DESC_CHAIN)
return MV_BAD_PARAM;
/* If not in PDMA fail operation */
if (nfcCtrl->ioMode != MV_NFC_PDMA_ACCESS)
return MV_BAD_PARAM;
/* Check that a chip was selected */
if (nfcCtrl->currCs == MV_NFC_CS_NONE)
return MV_FAIL;
/* Start the whole command chain through setting the ND_RUN */
/* Setting ND_RUN bit to start the new transaction - verify that controller in idle state */
while (timeout > 0) {
reg = MV_REG_READ(NFC_CONTROL_REG);
if (!(reg & NFC_CTRL_ND_RUN_MASK))
break;
timeout--;
}
if (timeout == 0)
return MV_BAD_STATE;
for (i = 0; i < descCnt; i++) {
if ((descInfo[i].cmd != MV_NFC_CMD_ERASE) &&
(descInfo[i].cmd != MV_NFC_CMD_MULTIPLANE_ERASE) &&
(descInfo[i].cmd != MV_NFC_CMD_RESET) &&
(descInfo[i].cmd != MV_NFC_CMD_EXIT_CACHE_READ) &&
(descInfo[i].cmd != MV_NFC_CMD_CACHE_READ_START) &&
(descInfo[i].cmd != MV_NFC_CMD_READ_DISPATCH) &&
(descInfo[i].cmd != MV_NFC_CMD_WRITE_DISPATCH_START) &&
(descInfo[i].cmd != MV_NFC_CMD_WRITE_DISPATCH_END)) {
/* Get transfer data length for this command type */
errCode = mvNfcTransferDataLength(nfcCtrl, descInfo[i].cmd, &xferLen);
if (errCode != MV_OK)
return errCode;
}
if (nfcCtrl->eccMode != MV_NFC_ECC_DISABLE) {
if ((descInfo[i].cmd == MV_NFC_CMD_READ_ID) || (descInfo[i].cmd == MV_NFC_CMD_READ_STATUS) ||
(descInfo[i].cmd == MV_NFC_CMD_ERASE) || (descInfo[i].cmd == MV_NFC_CMD_RESET)) {
/* disable ECC for these commands */
MV_REG_BIT_RESET(NFC_CONTROL_REG, NFC_CTRL_ECC_EN_MASK);
if (nfcCtrl->eccMode != MV_NFC_ECC_HAMMING)
MV_REG_BIT_RESET(NFC_ECC_CONTROL_REG, NFC_ECC_BCH_EN_MASK);
} else {
/* enable ECC for all other commands */
MV_REG_BIT_SET(NFC_CONTROL_REG, NFC_CTRL_ECC_EN_MASK);
if (nfcCtrl->eccMode != MV_NFC_ECC_HAMMING)
MV_REG_BIT_SET(NFC_ECC_CONTROL_REG, NFC_ECC_BCH_EN_MASK);
}
}
/* Build the command buffer */
ret = mvNfcBuildCommand(nfcCtrl, &descInfo[i], cmdb);
if (ret != MV_OK)
return ret;
/* Fill Command data */
cmdVirtPtr[i].cmdb0 = cmdb[0];
cmdVirtPtr[i].cmdb1 = cmdb[1];
cmdVirtPtr[i].cmdb2 = cmdb[2];
cmdVirtPtr[i].cmdb3 = cmdb[3];
/* Hook to the previous descriptor if exists */
if (i != 0) {
cmdDescVirtPtr[i - 1].physDescPtr = (MV_U32) &cmdDescPhysPtr[i];
cmdVirtPtr[i - 1].cmdb0 |= NFC_CB0_NEXT_CMD_MASK;
}
/* Fill Command Descriptor */
cmdDescVirtPtr[i].physDescPtr = 0x1;
cmdDescVirtPtr[i].physSrcAddr = (MV_U32) &cmdPhysPtr[i];
cmdDescVirtPtr[i].physDestAddr = nfcCtrl->regsPhysAddr + NFC_CMD_BUFF_ADDR;
cmdDescVirtPtr[i].commandValue = mvPdmaCommandRegCalc(&nfcCtrl->cmdChanHndl, MV_PDMA_MEM_TO_PERIPH,
NFC_CMD_BUFF_SIZE(cmdb[0]));
/* Check if data dma need to be operated for this command */
if ((descInfo[i].cmd != MV_NFC_CMD_ERASE) &&
(descInfo[i].cmd != MV_NFC_CMD_MULTIPLANE_ERASE) &&
(descInfo[i].cmd != MV_NFC_CMD_RESET) &&
(descInfo[i].cmd != MV_NFC_CMD_EXIT_CACHE_READ) &&
(descInfo[i].cmd != MV_NFC_CMD_CACHE_READ_START) &&
(descInfo[i].cmd != MV_NFC_CMD_READ_DISPATCH) &&
(descInfo[i].cmd != MV_NFC_CMD_WRITE_DISPATCH_START) &&
(descInfo[i].cmd != MV_NFC_CMD_WRITE_DISPATCH_END)) {
for (nPage = 0; nPage < descInfo[i].pageCount; nPage++) {
if (dataDescCount != 0)
dataDescVirtPtr[dataDescCount - 1].physDescPtr =
(MV_U32) &dataDescPhysPtr[dataDescCount];
/* Fill Data Descriptor */
if ((descInfo[i].cmd == MV_NFC_CMD_READ_MONOLITHIC) ||
(descInfo[i].cmd == MV_NFC_CMD_READ_MULTIPLE) ||
(descInfo[i].cmd == MV_NFC_CMD_CACHE_READ_SEQ) ||
(descInfo[i].cmd == MV_NFC_CMD_EXIT_CACHE_READ) ||
(descInfo[i].cmd == MV_NFC_CMD_CACHE_READ_RAND) ||
(descInfo[i].cmd == MV_NFC_CMD_READ_NAKED) ||
(descInfo[i].cmd == MV_NFC_CMD_READ_LAST_NAKED) ||
(descInfo[i].cmd == MV_NFC_CMD_READ_DISPATCH) ||
(descInfo[i].cmd == MV_NFC_CMD_READ_ID) ||
(descInfo[i].cmd == MV_NFC_CMD_READ_STATUS)) {
if (descInfo[i].numSgBuffs == 1) {
/* A single buffer, use physAddr */
dataDescVirtPtr[dataDescCount].physSrcAddr =
nfcCtrl->regsPhysAddr + NFC_DATA_BUFF_ADDR;
dataDescVirtPtr[dataDescCount].physDestAddr =
descInfo[i].physAddr + nPage * xferLen;
dataDescVirtPtr[dataDescCount].commandValue =
mvPdmaCommandRegCalc(&nfcCtrl->dataChanHndl, MV_PDMA_PERIPH_TO_MEM,
(descInfo[i].length ? descInfo[i].
length : xferLen));
} else {
/* Scatter-gather operation, use sgBuffAdd */
for (buff = 0; buff < descInfo[i].numSgBuffs; buff++) {
if (buff != 0)
dataDescVirtPtr[dataDescCount - 1].physDescPtr =
(MV_U32) &dataDescPhysPtr[dataDescCount];
dataDescVirtPtr[dataDescCount].physSrcAddr =
nfcCtrl->regsPhysAddr + NFC_DATA_BUFF_ADDR;
dataDescVirtPtr[dataDescCount].physDestAddr =
descInfo[i].sgBuffAddr[buff];
dataDescVirtPtr[dataDescCount].commandValue =
mvPdmaCommandRegCalc(&nfcCtrl->dataChanHndl,
MV_PDMA_PERIPH_TO_MEM,
descInfo[i].sgBuffSize[buff]);
dataDescCount++;
}
dataDescCount--;
}
} else { /* Write */
if (descInfo[i].numSgBuffs == 1) {
/* A single buffer, use physAddr */
dataDescVirtPtr[dataDescCount].physSrcAddr =
descInfo[i].physAddr + nPage * xferLen;
dataDescVirtPtr[dataDescCount].physDestAddr =
nfcCtrl->regsPhysAddr + NFC_DATA_BUFF_ADDR;
dataDescVirtPtr[dataDescCount].commandValue =
mvPdmaCommandRegCalc(&nfcCtrl->dataChanHndl, MV_PDMA_MEM_TO_PERIPH,
(descInfo[i].length ? descInfo[i].
length : xferLen));
} else {
/* Scatter-gather operation, use sgBuffAdd */
for (buff = 0; buff < descInfo[i].numSgBuffs; buff++) {
if (buff != 0)
dataDescVirtPtr[dataDescCount - 1].physDescPtr =
(MV_U32) &dataDescPhysPtr[dataDescCount];
dataDescVirtPtr[dataDescCount].physSrcAddr =
descInfo[i].sgBuffAddr[buff];
dataDescVirtPtr[dataDescCount].physDestAddr =
nfcCtrl->regsPhysAddr + NFC_DATA_BUFF_ADDR;
dataDescVirtPtr[dataDescCount].commandValue =
mvPdmaCommandRegCalc(&nfcCtrl->dataChanHndl,
MV_PDMA_MEM_TO_PERIPH,
descInfo[i].sgBuffSize[buff]);
dataDescCount++;
}
dataDescCount--;
}
}
dataDescVirtPtr[dataDescCount].physDescPtr = 0x1;
dataDescCount++;
if (dataDescCount > MV_NFC_MAX_DESC_CHAIN)
return MV_OUT_OF_RANGE;
}
}
}
#if 0
DBGPRINT((DBGLVL "\ncmdDescPhysPtr = %08x, Count = %d\n", (MV_U32) cmdDescPhysPtr, descCnt));
for (nPage = 0; nPage < descCnt; nPage++) {
DBGPRINT((DBGLVL " Command[%d] physDescPtr = %08x\n", nPage, cmdDescVirtPtr[nPage].physDescPtr));
DBGPRINT((DBGLVL " Command[%d] physSrcAddr = %08x\n", nPage, cmdDescVirtPtr[nPage].physSrcAddr));
DBGPRINT((DBGLVL " Command[%d] physDestAddr = %08x\n", nPage, cmdDescVirtPtr[nPage].physDestAddr));
DBGPRINT((DBGLVL " Command[%d] commandValue = %08x\n", nPage, cmdDescVirtPtr[nPage].commandValue));
DBGPRINT((DBGLVL " NDCB0 = %08x, NDCB1 = %08x, NDCB2 = %08x, NDCB3 = %08x\n",
cmdVirtPtr[nPage].cmdb0, cmdVirtPtr[nPage].cmdb1, cmdVirtPtr[nPage].cmdb2,
cmdVirtPtr[nPage].cmdb3));
}
DBGPRINT((DBGLVL "dataDescPhysPtr = %08x, Count = %d\n", (MV_U32) dataDescPhysPtr, dataDescCount));
for (nPage = 0; nPage < dataDescCount; nPage++) {
DBGPRINT((DBGLVL " Data[%d] physDescPtr = %08x\n", nPage, dataDescVirtPtr[nPage].physDescPtr));
DBGPRINT((DBGLVL " Data[%d] physSrcAddr = %08x\n", nPage, dataDescVirtPtr[nPage].physSrcAddr));
DBGPRINT((DBGLVL " Data[%d] physDestAddr = %08x\n", nPage, dataDescVirtPtr[nPage].physDestAddr));
DBGPRINT((DBGLVL " Data[%d] commandValue = %08x\n", nPage, dataDescVirtPtr[nPage].commandValue));
}
#endif
if (dataDescCount) {
/* enable interrupts in the last data descriptor. */
mvPdmaCommandIntrEnable(&nfcCtrl->dataChanHndl, &(dataDescVirtPtr[dataDescCount - 1].commandValue));
/* operate the data DMA */
if (mvPdmaChanTransfer(&nfcCtrl->dataChanHndl, MV_PDMA_PERIPH_TO_MEM,
0, 0, 0, (MV_U32) dataDescPhysPtr) != MV_OK)
return MV_HW_ERROR;
}
/* operate the command DMA */
if (mvPdmaChanTransfer(&nfcCtrl->cmdChanHndl, MV_PDMA_MEM_TO_PERIPH, 0, 0, 0, (MV_U32) cmdDescPhysPtr) != MV_OK)
return MV_HW_ERROR;
/* Clear all old events on the status register */
reg = MV_REG_READ(NFC_STATUS_REG);
MV_REG_WRITE(NFC_STATUS_REG, reg);
/* Start the whole command chain through setting the ND_RUN */
/* Setting ND_RUN bit to start the new transaction - verify that controller in idle state */
while (timeout > 0) {
reg = MV_REG_READ(NFC_CONTROL_REG);
if (!(reg & NFC_CTRL_ND_RUN_MASK))
break;
timeout--;
}
if (timeout == 0)
return MV_BAD_STATE;
reg |= NFC_CTRL_ND_RUN_MASK;
MV_REG_WRITE(NFC_CONTROL_REG, reg);
return MV_OK;
}
#endif
/*******************************************************************************
* mvNfcCommandPio
*
* DESCRIPTION:
* Issue a command to the NAND controller.
*
* INPUT:
* nfcCtrl - Nand control structure.
* cmd_descr - The command to issue, page address, page number, data length
*
* OUTPUT:
* None.
*
* RETURN:
* MV_OK - On success,
* MV_TIMEOUT - Timeout while waiting for command request.
* MV_FAIL - On failure
*******************************************************************************/
MV_STATUS mvNfcCommandPio(MV_NFC_CTRL *nfcCtrl, MV_NFC_MULTI_CMD *cmd_desc, MV_BOOL next)
{
MV_U32 reg;
MV_U32 errCode = MV_OK;
MV_U32 cmdb_pio[4];
MV_U32 *cmdb;
MV_U32 timeout = 10000;
MV_STATUS ret;
/* Check that a chip was selected */
if (nfcCtrl->currCs == MV_NFC_CS_NONE)
return MV_FAIL;
/* Clear all old events on the status register */
reg = MV_REG_READ(NFC_STATUS_REG);
MV_REG_WRITE(NFC_STATUS_REG, reg);
/* Setting ND_RUN bit to start the new transaction - verify that controller in idle state */
while (timeout > 0) {
reg = MV_REG_READ(NFC_CONTROL_REG);
if (!(reg & NFC_CTRL_ND_RUN_MASK))
break;
timeout--;
}
if (timeout == 0)
return MV_BAD_STATE;
reg |= NFC_CTRL_ND_RUN_MASK;
MV_REG_WRITE(NFC_CONTROL_REG, reg);
/* Wait for Command WRITE request */
errCode = mvDfcWait4Complete(NFC_SR_WRCMDREQ_MASK, 1);
if (errCode != MV_OK)
return errCode;
/* Build 12 byte Command */
if (nfcCtrl->ioMode == MV_NFC_PDMA_ACCESS)
cmdb = (MV_U32 *) nfcCtrl->cmdBuff.bufVirtPtr;
else /* PIO mode */
cmdb = cmdb_pio;
if (nfcCtrl->eccMode != MV_NFC_ECC_DISABLE) {
switch (cmd_desc->cmd) {
case MV_NFC_CMD_READ_MONOLITHIC:
case MV_NFC_CMD_READ_MULTIPLE:
case MV_NFC_CMD_READ_NAKED:
case MV_NFC_CMD_READ_LAST_NAKED:
case MV_NFC_CMD_WRITE_MONOLITHIC:
case MV_NFC_CMD_WRITE_MULTIPLE:
case MV_NFC_CMD_WRITE_NAKED:
case MV_NFC_CMD_WRITE_LAST_NAKED:
if (nfcCtrl->eccMode != MV_NFC_ECC_DISABLE) {
MV_REG_BIT_SET(NFC_CONTROL_REG, NFC_CTRL_ECC_EN_MASK);
if (nfcCtrl->eccMode != MV_NFC_ECC_HAMMING)
MV_REG_BIT_SET(NFC_ECC_CONTROL_REG, NFC_ECC_BCH_EN_MASK);
}
break;
default:
/* disable ECC for non-data commands */
MV_REG_BIT_RESET(NFC_CONTROL_REG, NFC_CTRL_ECC_EN_MASK);
MV_REG_BIT_RESET(NFC_ECC_CONTROL_REG, NFC_ECC_BCH_EN_MASK);
break;
};
}
/* Build the command buffer */
ret = mvNfcBuildCommand(nfcCtrl, cmd_desc, cmdb);
if (ret != MV_OK)
return ret;
/* If next command, link to it */
if (next)
cmdb[0] |= NFC_CB0_NEXT_CMD_MASK;
/* issue command */
MV_REG_WRITE(NFC_COMMAND_BUFF_0_REG, cmdb[0]);
MV_REG_WRITE(NFC_COMMAND_BUFF_0_REG, cmdb[1]);
MV_REG_WRITE(NFC_COMMAND_BUFF_0_REG, cmdb[2]);
MV_REG_WRITE(NFC_COMMAND_BUFF_0_REG, cmdb[3]);
return MV_OK;
}
/*******************************************************************************
* mvNfcStatusGet
*
* DESCRIPTION:
* Retrieve the NAND controller status to monitor the NAND access sequence.
*
* INPUT:
* nfcCtrl - Nand control structure.
* cmd - The last issued command to get the status for.
*
* OUTPUT:
* value - Relevant only if one of the MV_NFC_STATUS_BBD OR
* MV_NFC_STATUS_COR_ERROR errors is turned on.
* For MV_NFC_STATUS_COR_ERROR: Holds the errors count.
* For MV_NFC_STATUS_BBD: Holds the bad block address.
* If error value is not desired, pass NULL as input.
*
* RETURN:
* A bitmask of the MV_NFC_STATUS_XXX status bits.
*******************************************************************************/
MV_U32 mvNfcStatusGet(MV_NFC_CTRL *nfcCtrl, MV_NFC_CMD_TYPE cmd, MV_U32 *value)
{
MV_U32 reg, ret;
reg = MV_REG_READ(NFC_STATUS_REG);
if (reg == 0)
return 0;
if (value)
*value = ((reg & NFC_SR_ERR_CNT_MASK) >> NFC_SR_ERR_CNT_OFFS);
if ((nfcCtrl->currCs == MV_NFC_CS_0) || (nfcCtrl->currCs == MV_NFC_CS_2)) {
/* Clear out all non related interrupts */
reg &= (NFC_SR_CS0_BBD_MASK | NFC_SR_CS0_CMDD_MASK | NFC_SR_CS0_PAGED_MASK |
NFC_SR_RDY0_MASK | NFC_SR_WRCMDREQ_MASK | NFC_SR_RDDREQ_MASK |
NFC_SR_WRDREQ_MASK | NFC_SR_CORERR_MASK | NFC_SR_UNCERR_MASK);
ret = (reg & (NFC_SR_WRCMDREQ_MASK | NFC_SR_RDDREQ_MASK |
NFC_SR_WRDREQ_MASK | NFC_SR_CORERR_MASK | NFC_SR_UNCERR_MASK));
if (reg & NFC_SR_CS0_BBD_MASK)
ret |= MV_NFC_STATUS_BBD;
if (reg & NFC_SR_CS0_CMDD_MASK)
ret |= MV_NFC_STATUS_CMDD;
if (reg & NFC_SR_CS0_PAGED_MASK)
ret |= MV_NFC_STATUS_PAGED;
if (reg & NFC_SR_RDY0_MASK)
ret |= MV_NFC_STATUS_RDY;
} else if ((nfcCtrl->currCs == MV_NFC_CS_1) || (nfcCtrl->currCs == MV_NFC_CS_3)) {
reg &= (NFC_SR_CS1_BBD_MASK | NFC_SR_CS1_CMDD_MASK | NFC_SR_CS1_PAGED_MASK |
NFC_SR_RDY1_MASK | NFC_SR_WRCMDREQ_MASK | NFC_SR_RDDREQ_MASK |
NFC_SR_WRDREQ_MASK | NFC_SR_CORERR_MASK | NFC_SR_UNCERR_MASK);
ret = (reg & (NFC_SR_WRCMDREQ_MASK | NFC_SR_RDDREQ_MASK |
NFC_SR_WRDREQ_MASK | NFC_SR_CORERR_MASK | NFC_SR_UNCERR_MASK));
if (reg & NFC_SR_CS1_BBD_MASK)
ret |= MV_NFC_STATUS_BBD;
if (reg & NFC_SR_CS1_CMDD_MASK)
ret |= MV_NFC_STATUS_CMDD;
if (reg & NFC_SR_CS1_PAGED_MASK)
ret |= MV_NFC_STATUS_PAGED;
if (reg & NFC_SR_RDY1_MASK)
ret |= MV_NFC_STATUS_RDY;
} else {
reg &= (NFC_SR_WRCMDREQ_MASK | NFC_SR_RDDREQ_MASK |
NFC_SR_WRDREQ_MASK | NFC_SR_CORERR_MASK | NFC_SR_UNCERR_MASK);
ret = reg;
}
/* Clear out all reported events */
MV_REG_WRITE(NFC_STATUS_REG, reg);
return ret;
}
/*******************************************************************************
* mvNfcIntrSet
*
* DESCRIPTION:
* Enable / Disable a given set of the Nand controller interrupts.
*
* INPUT:
* inatMask - A bitmask of the interrupts to enable / disable.
* enable - MV_TRUE: Unmask the interrupts
* MV_FALSE: Mask the interrupts.
*
* OUTPUT:
* None.
*
* RETURN:
* MV_OK - On success,
* MV_FAIL - On failure
*******************************************************************************/
MV_STATUS mvNfcIntrSet(MV_NFC_CTRL *nfcCtrl, MV_U32 intMask, MV_BOOL enable)
{
MV_U32 reg;
MV_U32 msk = (intMask & (NFC_SR_WRCMDREQ_MASK | NFC_SR_RDDREQ_MASK | NFC_SR_WRDREQ_MASK |
NFC_SR_CORERR_MASK | NFC_SR_UNCERR_MASK));
if ((nfcCtrl->currCs == MV_NFC_CS_0) || (nfcCtrl->currCs == MV_NFC_CS_2)) {
if (intMask & MV_NFC_STATUS_BBD)
msk |= NFC_SR_CS0_BBD_MASK;
if (intMask & MV_NFC_STATUS_CMDD)
msk |= NFC_SR_CS0_CMDD_MASK;
if (intMask & MV_NFC_STATUS_PAGED)
msk |= NFC_SR_CS0_PAGED_MASK;
if (intMask & MV_NFC_STATUS_RDY)
msk |= NFC_SR_RDY0_MASK;
} else if ((nfcCtrl->currCs == MV_NFC_CS_1) || (nfcCtrl->currCs == MV_NFC_CS_3)) {
if (intMask & MV_NFC_STATUS_BBD)
msk |= NFC_SR_CS1_BBD_MASK;
if (intMask & MV_NFC_STATUS_CMDD)
msk |= NFC_SR_CS1_CMDD_MASK;
if (intMask & MV_NFC_STATUS_PAGED)
msk |= NFC_SR_CS1_PAGED_MASK;
if (intMask & MV_NFC_STATUS_RDY)
msk |= NFC_SR_RDY0_MASK;
}
reg = MV_REG_READ(NFC_CONTROL_REG);
if (enable)
reg &= ~msk;
else
reg |= msk;
MV_REG_WRITE(NFC_CONTROL_REG, reg);
return MV_OK;
}
/*******************************************************************************
* mvNfcReadWrite
*
* DESCRIPTION:
* Perform a read / write operation of a previously issued command.
* When working in PIO mode, this function will perform the read / write
* operation from / to the supplied buffer.
* when working in PDMA mode, this function will trigger the PDMA to start
* the data transfer.
* In all cases, the user is responsible to make sure that the data
* transfer operation was done successfully by polling the command done bit.
* Before calling this function, the Data-Read/Write request interrupts
* should be disabled (the one relevant to the command being processed).
*
* INPUT:
* nfcCtrl - Nand control structure.
* cmd - The previously issued command.
* virtBufAddr - [Relevant only when working in PIO mode]
* The virtual address of the buffer to read to / write from.
* physBufAddr - [Relevant only when working in PDMA mode]
* The physical address of the buffer to read to / write from.
* The buffer should be cache coherent for PDMA access.
*
* OUTPUT:
* None.
*
* RETURN:
* MV_OK - On success,
* MV_FAIL - On failure
*******************************************************************************/
MV_STATUS mvNfcReadWrite(MV_NFC_CTRL *nfcCtrl, MV_NFC_CMD_TYPE cmd, MV_U32 *virtBufAddr, MV_U32 physBuffAddr)
{
MV_U32 data_len = 0;
MV_U32 i;
MV_STATUS errCode;
errCode = mvNfcTransferDataLength(nfcCtrl, cmd, &data_len);
if (errCode != MV_OK)
return errCode;
switch (cmd) {
case MV_NFC_CMD_READ_ID:
case MV_NFC_CMD_READ_STATUS:
case MV_NFC_CMD_READ_MONOLITHIC: /* Read a single 512B or 2KB page */
case MV_NFC_CMD_READ_MULTIPLE:
case MV_NFC_CMD_READ_NAKED:
case MV_NFC_CMD_READ_LAST_NAKED:
case MV_NFC_CMD_READ_DISPATCH:
/* Issue command based on IO mode */
if (nfcCtrl->ioMode == MV_NFC_PDMA_ACCESS) {
#ifdef MV_INCLUDE_PDMA
/* operate the DMA */
if (mvPdmaChanTransfer(&nfcCtrl->dataChanHndl, MV_PDMA_PERIPH_TO_MEM,
nfcCtrl->regsPhysAddr + NFC_DATA_BUFF_ADDR,
physBuffAddr, data_len, 0) != MV_OK)
return MV_HW_ERROR;
#else
return MV_NOT_SUPPORTED;
#endif
} else { /* PIO mode */
for (i = 0; i < data_len; i += 4) {
*virtBufAddr = MV_REG_READ(NFC_DATA_BUFF_REG);
virtBufAddr++;
}
}
break;
case MV_NFC_CMD_WRITE_MONOLITHIC: /* Program a single page of 512B or 2KB */
case MV_NFC_CMD_WRITE_MULTIPLE:
case MV_NFC_CMD_WRITE_NAKED:
case MV_NFC_CMD_WRITE_LAST_NAKED:
case MV_NFC_CMD_WRITE_DISPATCH:
/* Issue command based on IO mode */
if (nfcCtrl->ioMode == MV_NFC_PDMA_ACCESS) {
#ifdef MV_INCLUDE_PDMA
/* operate the DMA */
if (mvPdmaChanTransfer(&nfcCtrl->dataChanHndl, MV_PDMA_MEM_TO_PERIPH,
physBuffAddr, nfcCtrl->regsPhysAddr + NFC_DATA_BUFF_ADDR,
data_len, 0) != MV_OK)
return MV_HW_ERROR;
#else
return MV_NOT_SUPPORTED;
#endif
} else { /* PIO mode */
for (i = 0; i < data_len; i += 4) {
MV_REG_WRITE(NFC_DATA_BUFF_REG, *virtBufAddr);
virtBufAddr++;
}
}
break;
default:
return MV_BAD_PARAM;
};
return MV_OK;
}
/*******************************************************************************
* mvNfcReadWritePio
*
* DESCRIPTION:
* Perform PIO read / write operation to the specified buffer.
*
* INPUT:
* nfcCtrl - Nand control structure.
* buff - The virtual address of the buffer to read to / write from.
* data_len - Byte count to transfer
* mode - Read / Write/ None
*
* OUTPUT:
* None.
*
* RETURN:
* None.
*******************************************************************************/
MV_VOID mvNfcReadWritePio(MV_NFC_CTRL *nfcCtrl, MV_U32 *buff, MV_U32 data_len, MV_NFC_PIO_RW_MODE mode)
{
MV_U32 i;
switch (mode) {
case MV_NFC_PIO_READ:
for (i = 0; i < data_len; i += 4) {
*buff = MV_REG_READ(NFC_DATA_BUFF_REG);
buff++;
}
break;
case MV_NFC_PIO_WRITE: /* Program a single page of 512B or 2KB */
for (i = 0; i < data_len; i += 4) {
MV_REG_WRITE(NFC_DATA_BUFF_REG, *buff);
buff++;
}
break;
default:
/* nothing to do */
break;
};
}
/*******************************************************************************
* mvNfcAddress2RowConvert
*
* DESCRIPTION:
* Convert an absolute flash address to row index.
*
* INPUT:
* nfcCtrl - Nand control structure.
* address - The absolute flash address.
*
* OUTPUT:
* row - The row number corresponding to the given address.
* colOffset- The column offset within the row.
*
* RETURN:
* None
*******************************************************************************/
MV_VOID mvNfcAddress2RowConvert(MV_NFC_CTRL *nfcCtrl, MV_U32 address, MV_U32 *row, MV_U32 *colOffset)
{
if (flashDeviceInfo[nfcCtrl->flashIdx].pgSz < MV_NFC_2KB_PAGE) { /* Small Page */
*colOffset = (address & 0xFF);
*row = (address >> 9);
} else { /* Large Page */
*colOffset = (address & (flashDeviceInfo[nfcCtrl->flashIdx].pgSz - 1));
/* Calculate the page bits */
*row = (address >> mvNfcColBits(flashDeviceInfo[nfcCtrl->flashIdx].pgSz));
}
}
/*******************************************************************************
* mvNfcAddress2BlockConvert
*
* DESCRIPTION:
* Convert an absolute flash address to erasable block address
*
* INPUT:
* nfcCtrl - Nand control structure.
* address - The absolute flash address.
*
* OUTPUT:
* blk - block address
*
* RETURN:
* None
*******************************************************************************/
MV_VOID mvNfcAddress2BlockConvert(MV_NFC_CTRL *nfcCtrl, MV_U32 address, MV_U32 *blk)
{
*blk = (address / (flashDeviceInfo[nfcCtrl->flashIdx].pgSz * flashDeviceInfo[nfcCtrl->flashIdx].pgPrBlk));
}
/*******************************************************************************
* mvNfcAddress2BlockConvert
*
* DESCRIPTION:
* Convert an absolute flash address to erasable block address
*
* INPUT:
* nfcCtrl - Nand control structure.
* address - The absolute flash address.
*
* OUTPUT:
* blk - block address
*
* RETURN:
* None
*******************************************************************************/
MV_8 *mvNfcFlashModelGet(MV_NFC_CTRL *nfcCtrl)
{
static MV_8 *unk_dev = "Unknown Flash Device";
if (nfcCtrl->flashIdx >= (sizeof(flashDeviceInfo) / sizeof(MV_NFC_FLASH_INFO)))
return unk_dev;
return flashDeviceInfo[nfcCtrl->flashIdx].model;
}
/*******************************************************************************
* mvNfcFlashPageSizeGet
*
* DESCRIPTION:
* Retrieve the logical page size of a given flash.
*
* INPUT:
* nfcCtrl - Nand control structure.
*
* OUTPUT:
* size - Flash page size in bytes.
* totalSize - Page size including spare area.
* (Pass NULL if not needed).
*
* RETURN:
* MV_NOT_FOUND - Bad flash index.
*******************************************************************************/
MV_STATUS mvNfcFlashPageSizeGet(MV_NFC_CTRL *nfcCtrl, MV_U32 *size, MV_U32 *totalSize)
{
if (nfcCtrl->flashIdx >= (sizeof(flashDeviceInfo) / sizeof(MV_NFC_FLASH_INFO)))
return MV_NOT_FOUND;
if (size == NULL)
return MV_BAD_PTR;
if (nfcCtrl->ifMode == MV_NFC_IF_2X8)
*size = flashDeviceInfo[nfcCtrl->flashIdx].pgSz << 1;
else
*size = flashDeviceInfo[nfcCtrl->flashIdx].pgSz;
if (totalSize) {
mvNfcTransferDataLength(nfcCtrl, MV_NFC_CMD_READ_MONOLITHIC, totalSize);
if (nfcCtrl->ifMode == MV_NFC_IF_2X8)
*totalSize = (*totalSize) << 1;
if (flashDeviceInfo[nfcCtrl->flashIdx].pgSz > MV_NFC_2KB_PAGE)
*totalSize = (*totalSize) << 1;
}
return MV_OK;
}
/*******************************************************************************
* mvNfcFlashBlockSizeGet
*
* DESCRIPTION:
* Retrieve the logical block size of a given flash.
*
* INPUT:
* nfcCtrl - Nand control structure.
*
* OUTPUT:
* size - Flash size in bytes.
*
* RETURN:
* MV_NOT_FOUND - Bad flash index.
*******************************************************************************/
MV_STATUS mvNfcFlashBlockSizeGet(MV_NFC_CTRL *nfcCtrl, MV_U32 *size)
{
if (nfcCtrl->flashIdx >= (sizeof(flashDeviceInfo) / sizeof(MV_NFC_FLASH_INFO)))
return MV_NOT_FOUND;
if (size == NULL)
return MV_BAD_PTR;
if (nfcCtrl->ifMode == MV_NFC_IF_2X8)
*size = ((flashDeviceInfo[nfcCtrl->flashIdx].pgSz << 1) * flashDeviceInfo[nfcCtrl->flashIdx].pgPrBlk);
else
*size = (flashDeviceInfo[nfcCtrl->flashIdx].pgSz * flashDeviceInfo[nfcCtrl->flashIdx].pgPrBlk);
return MV_OK;
}
/*******************************************************************************
* mvNfcFlashBlockNumGet
*
* DESCRIPTION:
* Retrieve the number of logical blocks of a given flash.
*
* INPUT:
* nfcCtrl - Nand control structure.
*
* OUTPUT:
* numBlocks - Flash number of blocks.
*
* RETURN:
* MV_NOT_FOUND - Bad flash index.
*******************************************************************************/
MV_STATUS mvNfcFlashBlockNumGet(MV_NFC_CTRL *nfcCtrl, MV_U32 *numBlocks)
{
if (nfcCtrl->flashIdx >= (sizeof(flashDeviceInfo) / sizeof(MV_NFC_FLASH_INFO)))
return MV_NOT_FOUND;
if (numBlocks == NULL)
return MV_BAD_PTR;
*numBlocks = flashDeviceInfo[nfcCtrl->flashIdx].blkNum;
return MV_OK;
}
/*******************************************************************************
* mvNfcFlashIdGet
*
* DESCRIPTION:
* Retrieve the flash device ID.
*
* INPUT:
* nfcCtrl - Nand control structure.
*
* OUTPUT:
* flashId - Flash ID.
*
* RETURN:
* MV_NOT_FOUND - Bad flash index.
*******************************************************************************/
MV_STATUS mvNfcFlashIdGet(MV_NFC_CTRL *nfcCtrl, MV_U32 *flashId)
{
if (nfcCtrl->flashIdx >= (sizeof(flashDeviceInfo) / sizeof(MV_NFC_FLASH_INFO)))
return MV_NOT_FOUND;
if (flashId == NULL)
return MV_BAD_PTR;
*flashId = flashDeviceInfo[nfcCtrl->flashIdx].id;
return MV_OK;
}
/*******************************************************************************
* mvNfcUnitStateStore - Store the NFC Unit state.
*
* DESCRIPTION:
* This function stores the NFC unit registers before the unit is suspended.
* The stored registers are placed into the input buffer which will be used for
* the restore operation.
*
* INPUT:
* regsData - Buffer to store the unit state registers (Must
* include at least 64 entries)
* len - Number of entries in regsData input buffer.
*
* OUTPUT:
* regsData - Unit state registers. The registers are stored in
* pairs of (reg, value).
* len - Number of entries in regsData buffer (Must be even).
*
* RETURS:
* MV_ERROR on failure.
* MV_OK on success.
*
*******************************************************************************/
MV_STATUS mvNfcUnitStateStore(MV_U32 *stateData, MV_U32 *len)
{
MV_U32 i;
if ((stateData == NULL) || (len == NULL))
return MV_BAD_PARAM;
i = 0;
stateData[i++] = NFC_CONTROL_REG;
stateData[i++] = MV_REG_READ(NFC_CONTROL_REG);
stateData[i++] = NFC_TIMING_0_REG;
stateData[i++] = MV_REG_READ(NFC_TIMING_0_REG);
stateData[i++] = NFC_TIMING_1_REG;
stateData[i++] = MV_REG_READ(NFC_TIMING_1_REG);
stateData[i++] = NFC_ECC_CONTROL_REG;
stateData[i++] = MV_REG_READ(NFC_ECC_CONTROL_REG);
*len = i;
return MV_OK;
}
/*******************************************************************************
* mvDfcWait4Complete
*
* DESCRIPTION:
* Wait for event or process to complete
*
* INPUT:
* statMask: bit to wait from in status register NDSR
* usec: Max uSec to wait for event
*
* OUTPUT:
* None.
*
* RETURN:
* MV_OK - On success,
* MV_TIMEOUT - Error accessing the underlying flahs device.
*******************************************************************************/
static MV_STATUS mvDfcWait4Complete(MV_U32 statMask, MV_U32 usec)
{
MV_U32 i, sts;
for (i = 0; i < usec; i++) {
sts = (MV_REG_READ(NFC_STATUS_REG) & statMask);
if (sts) {
MV_REG_WRITE(NFC_STATUS_REG, sts);
return MV_OK;
}
mvOsUDelay(1);
}
return MV_TIMEOUT;
}
#ifdef CONFIG_MTD_NAND_NFC_INIT_RESET
static MV_STATUS mvNfcReset(void)
{
MV_U32 reg;
MV_U32 errCode = MV_OK;
/* Clear all old events on the status register */
reg = MV_REG_READ(NFC_STATUS_REG);
MV_REG_WRITE(NFC_STATUS_REG, reg);
/* Setting ND_RUN bit to start the new transaction */
reg = MV_REG_READ(NFC_CONTROL_REG);
reg |= NFC_CTRL_ND_RUN_MASK;
MV_REG_WRITE(NFC_CONTROL_REG, reg);
/* Wait for Command WRITE request */
errCode = mvDfcWait4Complete(NFC_SR_WRCMDREQ_MASK, 1);
if (errCode != MV_OK)
goto Error;
/* Send Command */
MV_REG_WRITE(NFC_COMMAND_BUFF_0_REG, 0x00A000FF); /* DFC_NDCB0_RESET */
MV_REG_WRITE(NFC_COMMAND_BUFF_0_REG, 0x0);
MV_REG_WRITE(NFC_COMMAND_BUFF_0_REG, 0x0);
/* Wait for Command completion */
errCode = mvDfcWait4Complete((NFC_SR_CS0_CMDD_MASK | NFC_SR_RDY0_MASK), 10);
if (errCode != MV_OK)
goto Error;
/* Clear ND_RUN bit if not self cleared */
reg = MV_REG_READ(NFC_CONTROL_REG);
if (reg & NFC_CTRL_ND_RUN_MASK)
MV_REG_WRITE(NFC_CONTROL_REG, (reg & ~NFC_CTRL_ND_RUN_MASK));
Error:
return errCode;
}
#endif
/*******************************************************************************
* mvNfcReadIdNative
*
* DESCRIPTION:
* Read the flash Manufacturer and device ID in PIO mode.
*
* INPUT:
* None.
*
* OUTPUT:
* id: Manufacturer and Device Id detected (valid only if return is MV_OK).
*
* RETURN:
* MV_OK - On success,
* MV_TIMEOUT - Error accessing the underlying flahs device.
* MV_FAIL - On failure
*******************************************************************************/
static MV_STATUS mvNfcReadIdNative(MV_NFC_CHIP_SEL cs, MV_U16 *id)
{
MV_U32 reg, cmdb0 = 0, cmdb2 = 0;
MV_U32 errCode = MV_OK;
/* Clear all old events on the status register */
reg = MV_REG_READ(NFC_STATUS_REG);
MV_REG_WRITE(NFC_STATUS_REG, reg);
/* Setting ND_RUN bit to start the new transaction */
reg = MV_REG_READ(NFC_CONTROL_REG);
reg |= NFC_CTRL_ND_RUN_MASK;
MV_REG_WRITE(NFC_CONTROL_REG, reg);
/* Wait for Command WRITE request */
errCode = mvDfcWait4Complete(NFC_SR_WRCMDREQ_MASK, 1);
if (errCode != MV_OK)
return errCode;
/* Send Command */
reg = NFC_NATIVE_READ_ID_CMD;
reg |= (0x1 << NFC_CB0_ADDR_CYC_OFFS);
reg |= NFC_CB0_CMD_TYPE_READ_ID;
cmdb0 = reg;
if ((cs == MV_NFC_CS_1) || (cs == MV_NFC_CS_3))
cmdb0 |= NFC_CB0_CSEL_MASK;
if ((cs == MV_NFC_CS_2) || (cs == MV_NFC_CS_3))
cmdb2 |= NFC_CB2_CS_2_3_SELECT_MASK;
MV_REG_WRITE(NFC_COMMAND_BUFF_0_REG, cmdb0);
MV_REG_WRITE(NFC_COMMAND_BUFF_0_REG, 0x0);
MV_REG_WRITE(NFC_COMMAND_BUFF_0_REG, cmdb2);
/* Wait for Data READ request */
errCode = mvDfcWait4Complete(NFC_SR_RDDREQ_MASK, 10);
if (errCode != MV_OK)
return errCode;
/* Read the read ID bytes. + read 4 bogus bytes */
*id = (MV_U16) (MV_REG_READ(NFC_DATA_BUFF_REG) & 0xFFFF);
reg = MV_REG_READ(NFC_DATA_BUFF_REG); /* dummy read to complete 8 bytes */
reg = MV_REG_READ(NFC_CONTROL_REG);
if (reg & NFC_CTRL_ND_RUN_MASK) {
MV_REG_WRITE(NFC_CONTROL_REG, (reg & ~NFC_CTRL_ND_RUN_MASK));
return MV_BAD_STATE;
}
return MV_OK;
}
/*******************************************************************************
* mvNfcTimingSet
*
* DESCRIPTION:
* Set all flash timing parameters for optimized operation
*
* INPUT:
* tclk: Tclk frequency,
flInfo: timing information
*
* OUTPUT:
* None.
*
* RETURN:
* MV_OK - On success,
* MV_FAIL - On failure
*******************************************************************************/
static MV_STATUS mvNfcTimingSet(MV_U32 tclk, MV_NFC_FLASH_INFO *flInfo)
{
MV_U32 reg;
MV_U32 clk2ns;
switch (tclk) {
case 166666667:
clk2ns = 6;
break;
case 200000000:
clk2ns = 5;
break;
case 250000000:
clk2ns = 4;
break;
default:
return MV_FAIL;
};
/* Configure the Timing-0 register */
reg = 0;
reg |= NFC_TMNG0_SEL_CNTR_MASK;
reg |= ((ns_clk(flInfo->tADL, clk2ns) << NFC_TMNG0_TADL_OFFS) & NFC_TMNG0_TADL_MASK);
reg |= ((ns_clk(flInfo->tCH, clk2ns) << NFC_TMNG0_TCH_OFFS) & NFC_TMNG0_TCH_MASK);
reg |= ((ns_clk(flInfo->tCS, clk2ns) << NFC_TMNG0_TCS_OFFS) & NFC_TMNG0_TCS_MASK);
reg |= ((ns_clk(flInfo->tWH, clk2ns) << NFC_TMNG0_TWH_OFFS) & NFC_TMNG0_TWH_MASK);
reg |= ((ns_clk(flInfo->tWP, clk2ns) << NFC_TMNG0_TWP_OFFS) & NFC_TMNG0_TWP_MASK);
reg |= ((ns_clk(flInfo->tRH, clk2ns) << NFC_TMNG0_TRH_OFFS) & NFC_TMNG0_TRH_MASK);
reg |= ((ns_clk(flInfo->tRP, clk2ns) << NFC_TMNG0_TRP_OFFS) & NFC_TMNG0_TRP_MASK);
MV_REG_WRITE(NFC_TIMING_0_REG, reg);
/* Configure the Timing-1 register */
reg = 0;
reg |= ((ns_clk(flInfo->tR, clk2ns) << NFC_TMNG1_TR_OFFS) & NFC_TMNG1_TR_MASK);
reg |= ((ns_clk(flInfo->tWHR, clk2ns) << NFC_TMNG1_TWHR_OFFS) & NFC_TMNG1_TWHR_MASK);
reg |= ((ns_clk(flInfo->tAR, clk2ns) << NFC_TMNG1_TAR_OFFS) & NFC_TMNG1_TAR_MASK);
reg |= (((flInfo->tRHW / 16) << NFC_TMNG1_TRHW_OFFS) & NFC_TMNG1_TRHW_MASK);
reg |= NFC_TMNG1_WAIT_MODE_MASK;
MV_REG_WRITE(NFC_TIMING_1_REG, reg);
return MV_OK;
}
/*******************************************************************************
* mvNfcColBits
*
* DESCRIPTION:
* Calculate number of bits representing column part of the address
*
* INPUT:
pg_size: page size
*
* OUTPUT:
* None.
*
* RETURN:
* Number of bits representing a column
*******************************************************************************/
static MV_U32 mvNfcColBits(MV_U32 pg_size)
{
MV_U32 shift = 0;
while (pg_size) {
++shift;
pg_size >>= 1;
};
return (shift - 1);
}
/*******************************************************************************
* mvNfcEccModeSet
*
* DESCRIPTION:
* Set the ECC mode at runtime to BCH, Hamming or No Ecc.
*
* INPUT:
* nfcCtrl - Nand control structure.
* MV_NFC_ECC_MODE eccMode: ECC type (BCH, Hamming or No Ecc)
*
* OUTPUT:
* None.
*
* RETURN:
* previous ECC mode.
*******************************************************************************/
MV_NFC_ECC_MODE mvNfcEccModeSet(MV_NFC_CTRL *nfcCtrl, MV_NFC_ECC_MODE eccMode)
{
MV_NFC_ECC_MODE prevEccMode;
prevEccMode = nfcCtrl->eccMode;
nfcCtrl->eccMode = eccMode;
return prevEccMode;
}
/*******************************************************************************
* mvNfcBadBlockPageNumber
*
* DESCRIPTION:
* Get the page number within the block holding the bad block indication
*
* INPUT:
* nfcCtrl - Nand control structure.
*
* OUTPUT:
* None
*
* RETURN:
* page number having the bad block indicator
*******************************************************************************/
MV_U32 mvNfcBadBlockPageNumber(MV_NFC_CTRL *nfcCtrl)
{
return flashDeviceInfo[nfcCtrl->flashIdx].bb_page;
}