| /* |
| * arch/arm/mach-pxa/colibri-pxa3xx.c |
| * |
| * Common functions for all Toradex PXA3xx modules |
| * |
| * Daniel Mack <daniel@caiaq.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/etherdevice.h> |
| #include <asm/mach-types.h> |
| #include <mach/hardware.h> |
| #include <asm/sizes.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/irq.h> |
| #include <mach/pxa3xx-regs.h> |
| #include <mach/mfp-pxa300.h> |
| #include <mach/colibri.h> |
| #include <mach/mmc.h> |
| #include <mach/pxafb.h> |
| #include <mach/pxa3xx_nand.h> |
| |
| #include "generic.h" |
| #include "devices.h" |
| |
| #if defined(CONFIG_AX88796) |
| #define ETHER_ADDR_LEN 6 |
| static u8 ether_mac_addr[ETHER_ADDR_LEN]; |
| |
| void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data) |
| { |
| int i; |
| u64 serial = ((u64) system_serial_high << 32) | system_serial_low; |
| |
| /* |
| * If the bootloader passed in a serial boot tag, which contains a |
| * valid ethernet MAC, pass it to the interface. Toradex ships the |
| * modules with their own bootloader which provides a valid MAC |
| * this way. |
| */ |
| |
| for (i = 0; i < ETHER_ADDR_LEN; i++) { |
| ether_mac_addr[i] = serial & 0xff; |
| serial >>= 8; |
| } |
| |
| if (is_valid_ether_addr(ether_mac_addr)) { |
| plat_data->flags |= AXFLG_MAC_FROMPLATFORM; |
| plat_data->mac_addr = ether_mac_addr; |
| printk(KERN_INFO "%s(): taking MAC from serial boot tag\n", |
| __func__); |
| } else { |
| plat_data->flags |= AXFLG_MAC_FROMDEV; |
| printk(KERN_INFO "%s(): no valid serial boot tag found, " |
| "taking MAC from device\n", __func__); |
| } |
| } |
| #endif |
| |
| #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) |
| static int mmc_detect_pin; |
| |
| static int colibri_pxa3xx_mci_init(struct device *dev, |
| irq_handler_t colibri_mmc_detect_int, |
| void *data) |
| { |
| int ret; |
| |
| ret = gpio_request(mmc_detect_pin, "mmc card detect"); |
| if (ret) |
| return ret; |
| |
| gpio_direction_input(mmc_detect_pin); |
| ret = request_irq(gpio_to_irq(mmc_detect_pin), colibri_mmc_detect_int, |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| "MMC card detect", data); |
| if (ret) { |
| gpio_free(mmc_detect_pin); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void colibri_pxa3xx_mci_exit(struct device *dev, void *data) |
| { |
| free_irq(mmc_detect_pin, data); |
| gpio_free(gpio_to_irq(mmc_detect_pin)); |
| } |
| |
| static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = { |
| .detect_delay = 20, |
| .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| .init = colibri_pxa3xx_mci_init, |
| .exit = colibri_pxa3xx_mci_exit, |
| .gpio_card_detect = -1, |
| .gpio_card_ro = -1, |
| .gpio_power = -1, |
| }; |
| |
| void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) |
| { |
| pxa3xx_mfp_config(pins, len); |
| mmc_detect_pin = detect_pin; |
| pxa_set_mci_info(&colibri_pxa3xx_mci_platform_data); |
| } |
| #endif /* CONFIG_MMC_PXA || CONFIG_MMC_PXA_MODULE */ |
| |
| #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) |
| static int lcd_bl_pin; |
| |
| /* |
| * LCD panel (Sharp LQ043T3DX02) |
| */ |
| static void colibri_lcd_backlight(int on) |
| { |
| gpio_set_value(lcd_bl_pin, !!on); |
| } |
| |
| static struct pxafb_mode_info sharp_lq43_mode = { |
| .pixclock = 101936, |
| .xres = 480, |
| .yres = 272, |
| .bpp = 32, |
| .depth = 18, |
| .hsync_len = 41, |
| .left_margin = 2, |
| .right_margin = 2, |
| .vsync_len = 10, |
| .upper_margin = 2, |
| .lower_margin = 2, |
| .sync = 0, |
| .cmap_greyscale = 0, |
| }; |
| |
| static struct pxafb_mach_info sharp_lq43_info = { |
| .modes = &sharp_lq43_mode, |
| .num_modes = 1, |
| .cmap_inverse = 0, |
| .cmap_static = 0, |
| .lcd_conn = LCD_COLOR_TFT_18BPP, |
| .pxafb_backlight_power = colibri_lcd_backlight, |
| }; |
| |
| void __init colibri_pxa3xx_init_lcd(int bl_pin) |
| { |
| lcd_bl_pin = bl_pin; |
| gpio_request(bl_pin, "lcd backlight"); |
| gpio_direction_output(bl_pin, 0); |
| set_pxa_fb_info(&sharp_lq43_info); |
| } |
| #endif |
| |
| #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE) |
| static struct mtd_partition colibri_nand_partitions[] = { |
| { |
| .name = "bootloader", |
| .offset = 0, |
| .size = SZ_512K, |
| .mask_flags = MTD_WRITEABLE, /* force read-only */ |
| }, |
| { |
| .name = "kernel", |
| .offset = MTDPART_OFS_APPEND, |
| .size = SZ_4M, |
| .mask_flags = MTD_WRITEABLE, /* force read-only */ |
| }, |
| { |
| .name = "reserved", |
| .offset = MTDPART_OFS_APPEND, |
| .size = SZ_1M, |
| .mask_flags = MTD_WRITEABLE, /* force read-only */ |
| }, |
| { |
| .name = "fs", |
| .offset = MTDPART_OFS_APPEND, |
| .size = MTDPART_SIZ_FULL, |
| }, |
| }; |
| |
| static struct pxa3xx_nand_platform_data colibri_nand_info = { |
| .enable_arbiter = 1, |
| .keep_config = 1, |
| .parts = colibri_nand_partitions, |
| .nr_parts = ARRAY_SIZE(colibri_nand_partitions), |
| }; |
| |
| void __init colibri_pxa3xx_init_nand(void) |
| { |
| pxa3xx_set_nand_info(&colibri_nand_info); |
| } |
| #endif |
| |