Daniel Mentz | 94787a1 | 2013-05-29 21:12:04 -0700 | [diff] [blame] | 1 | /* |
| 2 | * QLogic Fibre Channel HBA Driver |
| 3 | * Copyright (c) 2003-2011 QLogic Corporation |
| 4 | * |
| 5 | * See LICENSE.qla2xxx for copyright and licensing details. |
| 6 | */ |
| 7 | #include "qla_def.h" |
| 8 | #include "qla_gbl.h" |
| 9 | |
| 10 | #include <linux/delay.h> |
| 11 | #include <linux/slab.h> |
| 12 | #include <linux/vmalloc.h> |
| 13 | |
| 14 | #include "qla_devtbl.h" |
| 15 | |
| 16 | #ifdef CONFIG_SPARC |
| 17 | #include <asm/prom.h> |
| 18 | #endif |
| 19 | |
| 20 | /* |
| 21 | * QLogic ISP2x00 Hardware Support Function Prototypes. |
| 22 | */ |
| 23 | static int qla2x00_isp_firmware(scsi_qla_host_t *); |
| 24 | static int qla2x00_setup_chip(scsi_qla_host_t *); |
| 25 | static int qla2x00_init_rings(scsi_qla_host_t *); |
| 26 | static int qla2x00_fw_ready(scsi_qla_host_t *); |
| 27 | static int qla2x00_configure_hba(scsi_qla_host_t *); |
| 28 | static int qla2x00_configure_loop(scsi_qla_host_t *); |
| 29 | static int qla2x00_configure_local_loop(scsi_qla_host_t *); |
| 30 | static int qla2x00_configure_fabric(scsi_qla_host_t *); |
| 31 | static int qla2x00_find_all_fabric_devs(scsi_qla_host_t *, struct list_head *); |
| 32 | static int qla2x00_device_resync(scsi_qla_host_t *); |
| 33 | static int qla2x00_fabric_dev_login(scsi_qla_host_t *, fc_port_t *, |
| 34 | uint16_t *); |
| 35 | |
| 36 | static int qla2x00_restart_isp(scsi_qla_host_t *); |
| 37 | |
| 38 | static struct qla_chip_state_84xx *qla84xx_get_chip(struct scsi_qla_host *); |
| 39 | static int qla84xx_init_chip(scsi_qla_host_t *); |
| 40 | static int qla25xx_init_queues(struct qla_hw_data *); |
| 41 | |
| 42 | /* SRB Extensions ---------------------------------------------------------- */ |
| 43 | |
| 44 | static void |
| 45 | qla2x00_ctx_sp_timeout(unsigned long __data) |
| 46 | { |
| 47 | srb_t *sp = (srb_t *)__data; |
| 48 | struct srb_ctx *ctx; |
| 49 | struct srb_iocb *iocb; |
| 50 | fc_port_t *fcport = sp->fcport; |
| 51 | struct qla_hw_data *ha = fcport->vha->hw; |
| 52 | struct req_que *req; |
| 53 | unsigned long flags; |
| 54 | |
| 55 | spin_lock_irqsave(&ha->hardware_lock, flags); |
| 56 | req = ha->req_q_map[0]; |
| 57 | req->outstanding_cmds[sp->handle] = NULL; |
| 58 | ctx = sp->ctx; |
| 59 | iocb = ctx->u.iocb_cmd; |
| 60 | iocb->timeout(sp); |
| 61 | iocb->free(sp); |
| 62 | spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| 63 | } |
| 64 | |
| 65 | static void |
| 66 | qla2x00_ctx_sp_free(srb_t *sp) |
| 67 | { |
| 68 | struct srb_ctx *ctx = sp->ctx; |
| 69 | struct srb_iocb *iocb = ctx->u.iocb_cmd; |
| 70 | struct scsi_qla_host *vha = sp->fcport->vha; |
| 71 | |
| 72 | del_timer(&iocb->timer); |
| 73 | kfree(iocb); |
| 74 | kfree(ctx); |
| 75 | mempool_free(sp, sp->fcport->vha->hw->srb_mempool); |
| 76 | |
| 77 | QLA_VHA_MARK_NOT_BUSY(vha); |
| 78 | } |
| 79 | |
| 80 | inline srb_t * |
| 81 | qla2x00_get_ctx_sp(scsi_qla_host_t *vha, fc_port_t *fcport, size_t size, |
| 82 | unsigned long tmo) |
| 83 | { |
| 84 | srb_t *sp = NULL; |
| 85 | struct qla_hw_data *ha = vha->hw; |
| 86 | struct srb_ctx *ctx; |
| 87 | struct srb_iocb *iocb; |
| 88 | uint8_t bail; |
| 89 | |
| 90 | QLA_VHA_MARK_BUSY(vha, bail); |
| 91 | if (bail) |
| 92 | return NULL; |
| 93 | |
| 94 | sp = mempool_alloc(ha->srb_mempool, GFP_KERNEL); |
| 95 | if (!sp) |
| 96 | goto done; |
| 97 | ctx = kzalloc(size, GFP_KERNEL); |
| 98 | if (!ctx) { |
| 99 | mempool_free(sp, ha->srb_mempool); |
| 100 | sp = NULL; |
| 101 | goto done; |
| 102 | } |
| 103 | iocb = kzalloc(sizeof(struct srb_iocb), GFP_KERNEL); |
| 104 | if (!iocb) { |
| 105 | mempool_free(sp, ha->srb_mempool); |
| 106 | sp = NULL; |
| 107 | kfree(ctx); |
| 108 | goto done; |
| 109 | } |
| 110 | |
| 111 | memset(sp, 0, sizeof(*sp)); |
| 112 | sp->fcport = fcport; |
| 113 | sp->ctx = ctx; |
| 114 | ctx->u.iocb_cmd = iocb; |
| 115 | iocb->free = qla2x00_ctx_sp_free; |
| 116 | |
| 117 | init_timer(&iocb->timer); |
| 118 | if (!tmo) |
| 119 | goto done; |
| 120 | iocb->timer.expires = jiffies + tmo * HZ; |
| 121 | iocb->timer.data = (unsigned long)sp; |
| 122 | iocb->timer.function = qla2x00_ctx_sp_timeout; |
| 123 | add_timer(&iocb->timer); |
| 124 | done: |
| 125 | if (!sp) |
| 126 | QLA_VHA_MARK_NOT_BUSY(vha); |
| 127 | return sp; |
| 128 | } |
| 129 | |
| 130 | /* Asynchronous Login/Logout Routines -------------------------------------- */ |
| 131 | |
| 132 | static inline unsigned long |
| 133 | qla2x00_get_async_timeout(struct scsi_qla_host *vha) |
| 134 | { |
| 135 | unsigned long tmo; |
| 136 | struct qla_hw_data *ha = vha->hw; |
| 137 | |
| 138 | /* Firmware should use switch negotiated r_a_tov for timeout. */ |
| 139 | tmo = ha->r_a_tov / 10 * 2; |
| 140 | if (!IS_FWI2_CAPABLE(ha)) { |
| 141 | /* |
| 142 | * Except for earlier ISPs where the timeout is seeded from the |
| 143 | * initialization control block. |
| 144 | */ |
| 145 | tmo = ha->login_timeout; |
| 146 | } |
| 147 | return tmo; |
| 148 | } |
| 149 | |
| 150 | static void |
| 151 | qla2x00_async_iocb_timeout(srb_t *sp) |
| 152 | { |
| 153 | fc_port_t *fcport = sp->fcport; |
| 154 | struct srb_ctx *ctx = sp->ctx; |
| 155 | |
| 156 | ql_dbg(ql_dbg_disc, fcport->vha, 0x2071, |
| 157 | "Async-%s timeout - portid=%02x%02x%02x.\n", |
| 158 | ctx->name, fcport->d_id.b.domain, fcport->d_id.b.area, |
| 159 | fcport->d_id.b.al_pa); |
| 160 | |
| 161 | fcport->flags &= ~FCF_ASYNC_SENT; |
| 162 | if (ctx->type == SRB_LOGIN_CMD) { |
| 163 | struct srb_iocb *lio = ctx->u.iocb_cmd; |
| 164 | qla2x00_post_async_logout_work(fcport->vha, fcport, NULL); |
| 165 | /* Retry as needed. */ |
| 166 | lio->u.logio.data[0] = MBS_COMMAND_ERROR; |
| 167 | lio->u.logio.data[1] = lio->u.logio.flags & SRB_LOGIN_RETRIED ? |
| 168 | QLA_LOGIO_LOGIN_RETRIED : 0; |
| 169 | qla2x00_post_async_login_done_work(fcport->vha, fcport, |
| 170 | lio->u.logio.data); |
| 171 | } |
| 172 | } |
| 173 | |
| 174 | static void |
| 175 | qla2x00_async_login_ctx_done(srb_t *sp) |
| 176 | { |
| 177 | struct srb_ctx *ctx = sp->ctx; |
| 178 | struct srb_iocb *lio = ctx->u.iocb_cmd; |
| 179 | |
| 180 | qla2x00_post_async_login_done_work(sp->fcport->vha, sp->fcport, |
| 181 | lio->u.logio.data); |
| 182 | lio->free(sp); |
| 183 | } |
| 184 | |
| 185 | int |
| 186 | qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport, |
| 187 | uint16_t *data) |
| 188 | { |
| 189 | srb_t *sp; |
| 190 | struct srb_ctx *ctx; |
| 191 | struct srb_iocb *lio; |
| 192 | int rval; |
| 193 | |
| 194 | rval = QLA_FUNCTION_FAILED; |
| 195 | sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_ctx), |
| 196 | qla2x00_get_async_timeout(vha) + 2); |
| 197 | if (!sp) |
| 198 | goto done; |
| 199 | |
| 200 | ctx = sp->ctx; |
| 201 | ctx->type = SRB_LOGIN_CMD; |
| 202 | ctx->name = "login"; |
| 203 | lio = ctx->u.iocb_cmd; |
| 204 | lio->timeout = qla2x00_async_iocb_timeout; |
| 205 | lio->done = qla2x00_async_login_ctx_done; |
| 206 | lio->u.logio.flags |= SRB_LOGIN_COND_PLOGI; |
| 207 | if (data[1] & QLA_LOGIO_LOGIN_RETRIED) |
| 208 | lio->u.logio.flags |= SRB_LOGIN_RETRIED; |
| 209 | rval = qla2x00_start_sp(sp); |
| 210 | if (rval != QLA_SUCCESS) |
| 211 | goto done_free_sp; |
| 212 | |
| 213 | ql_dbg(ql_dbg_disc, vha, 0x2072, |
| 214 | "Async-login - loopid=%x portid=%02x%02x%02x retries=%d.\n", |
| 215 | fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area, |
| 216 | fcport->d_id.b.al_pa, fcport->login_retry); |
| 217 | return rval; |
| 218 | |
| 219 | done_free_sp: |
| 220 | lio->free(sp); |
| 221 | done: |
| 222 | return rval; |
| 223 | } |
| 224 | |
| 225 | static void |
| 226 | qla2x00_async_logout_ctx_done(srb_t *sp) |
| 227 | { |
| 228 | struct srb_ctx *ctx = sp->ctx; |
| 229 | struct srb_iocb *lio = ctx->u.iocb_cmd; |
| 230 | |
| 231 | qla2x00_post_async_logout_done_work(sp->fcport->vha, sp->fcport, |
| 232 | lio->u.logio.data); |
| 233 | lio->free(sp); |
| 234 | } |
| 235 | |
| 236 | int |
| 237 | qla2x00_async_logout(struct scsi_qla_host *vha, fc_port_t *fcport) |
| 238 | { |
| 239 | srb_t *sp; |
| 240 | struct srb_ctx *ctx; |
| 241 | struct srb_iocb *lio; |
| 242 | int rval; |
| 243 | |
| 244 | rval = QLA_FUNCTION_FAILED; |
| 245 | sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_ctx), |
| 246 | qla2x00_get_async_timeout(vha) + 2); |
| 247 | if (!sp) |
| 248 | goto done; |
| 249 | |
| 250 | ctx = sp->ctx; |
| 251 | ctx->type = SRB_LOGOUT_CMD; |
| 252 | ctx->name = "logout"; |
| 253 | lio = ctx->u.iocb_cmd; |
| 254 | lio->timeout = qla2x00_async_iocb_timeout; |
| 255 | lio->done = qla2x00_async_logout_ctx_done; |
| 256 | rval = qla2x00_start_sp(sp); |
| 257 | if (rval != QLA_SUCCESS) |
| 258 | goto done_free_sp; |
| 259 | |
| 260 | ql_dbg(ql_dbg_disc, vha, 0x2070, |
| 261 | "Async-logout - loop-id=%x portid=%02x%02x%02x.\n", |
| 262 | fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area, |
| 263 | fcport->d_id.b.al_pa); |
| 264 | return rval; |
| 265 | |
| 266 | done_free_sp: |
| 267 | lio->free(sp); |
| 268 | done: |
| 269 | return rval; |
| 270 | } |
| 271 | |
| 272 | static void |
| 273 | qla2x00_async_adisc_ctx_done(srb_t *sp) |
| 274 | { |
| 275 | struct srb_ctx *ctx = sp->ctx; |
| 276 | struct srb_iocb *lio = ctx->u.iocb_cmd; |
| 277 | |
| 278 | qla2x00_post_async_adisc_done_work(sp->fcport->vha, sp->fcport, |
| 279 | lio->u.logio.data); |
| 280 | lio->free(sp); |
| 281 | } |
| 282 | |
| 283 | int |
| 284 | qla2x00_async_adisc(struct scsi_qla_host *vha, fc_port_t *fcport, |
| 285 | uint16_t *data) |
| 286 | { |
| 287 | srb_t *sp; |
| 288 | struct srb_ctx *ctx; |
| 289 | struct srb_iocb *lio; |
| 290 | int rval; |
| 291 | |
| 292 | rval = QLA_FUNCTION_FAILED; |
| 293 | sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_ctx), |
| 294 | qla2x00_get_async_timeout(vha) + 2); |
| 295 | if (!sp) |
| 296 | goto done; |
| 297 | |
| 298 | ctx = sp->ctx; |
| 299 | ctx->type = SRB_ADISC_CMD; |
| 300 | ctx->name = "adisc"; |
| 301 | lio = ctx->u.iocb_cmd; |
| 302 | lio->timeout = qla2x00_async_iocb_timeout; |
| 303 | lio->done = qla2x00_async_adisc_ctx_done; |
| 304 | if (data[1] & QLA_LOGIO_LOGIN_RETRIED) |
| 305 | lio->u.logio.flags |= SRB_LOGIN_RETRIED; |
| 306 | rval = qla2x00_start_sp(sp); |
| 307 | if (rval != QLA_SUCCESS) |
| 308 | goto done_free_sp; |
| 309 | |
| 310 | ql_dbg(ql_dbg_disc, vha, 0x206f, |
| 311 | "Async-adisc - loopid=%x portid=%02x%02x%02x.\n", |
| 312 | fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area, |
| 313 | fcport->d_id.b.al_pa); |
| 314 | return rval; |
| 315 | |
| 316 | done_free_sp: |
| 317 | lio->free(sp); |
| 318 | done: |
| 319 | return rval; |
| 320 | } |
| 321 | |
| 322 | static void |
| 323 | qla2x00_async_tm_cmd_ctx_done(srb_t *sp) |
| 324 | { |
| 325 | struct srb_ctx *ctx = sp->ctx; |
| 326 | struct srb_iocb *iocb = (struct srb_iocb *)ctx->u.iocb_cmd; |
| 327 | |
| 328 | qla2x00_async_tm_cmd_done(sp->fcport->vha, sp->fcport, iocb); |
| 329 | iocb->free(sp); |
| 330 | } |
| 331 | |
| 332 | int |
| 333 | qla2x00_async_tm_cmd(fc_port_t *fcport, uint32_t flags, uint32_t lun, |
| 334 | uint32_t tag) |
| 335 | { |
| 336 | struct scsi_qla_host *vha = fcport->vha; |
| 337 | srb_t *sp; |
| 338 | struct srb_ctx *ctx; |
| 339 | struct srb_iocb *tcf; |
| 340 | int rval; |
| 341 | |
| 342 | rval = QLA_FUNCTION_FAILED; |
| 343 | sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_ctx), |
| 344 | qla2x00_get_async_timeout(vha) + 2); |
| 345 | if (!sp) |
| 346 | goto done; |
| 347 | |
| 348 | ctx = sp->ctx; |
| 349 | ctx->type = SRB_TM_CMD; |
| 350 | ctx->name = "tmf"; |
| 351 | tcf = ctx->u.iocb_cmd; |
| 352 | tcf->u.tmf.flags = flags; |
| 353 | tcf->u.tmf.lun = lun; |
| 354 | tcf->u.tmf.data = tag; |
| 355 | tcf->timeout = qla2x00_async_iocb_timeout; |
| 356 | tcf->done = qla2x00_async_tm_cmd_ctx_done; |
| 357 | |
| 358 | rval = qla2x00_start_sp(sp); |
| 359 | if (rval != QLA_SUCCESS) |
| 360 | goto done_free_sp; |
| 361 | |
| 362 | ql_dbg(ql_dbg_taskm, vha, 0x802f, |
| 363 | "Async-tmf loop-id=%x portid=%02x%02x%02x.\n", |
| 364 | fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area, |
| 365 | fcport->d_id.b.al_pa); |
| 366 | return rval; |
| 367 | |
| 368 | done_free_sp: |
| 369 | tcf->free(sp); |
| 370 | done: |
| 371 | return rval; |
| 372 | } |
| 373 | |
| 374 | void |
| 375 | qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport, |
| 376 | uint16_t *data) |
| 377 | { |
| 378 | int rval; |
| 379 | |
| 380 | switch (data[0]) { |
| 381 | case MBS_COMMAND_COMPLETE: |
| 382 | /* |
| 383 | * Driver must validate login state - If PRLI not complete, |
| 384 | * force a relogin attempt via implicit LOGO, PLOGI, and PRLI |
| 385 | * requests. |
| 386 | */ |
| 387 | rval = qla2x00_get_port_database(vha, fcport, 0); |
| 388 | if (rval != QLA_SUCCESS) { |
| 389 | qla2x00_post_async_logout_work(vha, fcport, NULL); |
| 390 | qla2x00_post_async_login_work(vha, fcport, NULL); |
| 391 | break; |
| 392 | } |
| 393 | if (fcport->flags & FCF_FCP2_DEVICE) { |
| 394 | qla2x00_post_async_adisc_work(vha, fcport, data); |
| 395 | break; |
| 396 | } |
| 397 | qla2x00_update_fcport(vha, fcport); |
| 398 | break; |
| 399 | case MBS_COMMAND_ERROR: |
| 400 | fcport->flags &= ~FCF_ASYNC_SENT; |
| 401 | if (data[1] & QLA_LOGIO_LOGIN_RETRIED) |
| 402 | set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| 403 | else |
| 404 | qla2x00_mark_device_lost(vha, fcport, 1, 0); |
| 405 | break; |
| 406 | case MBS_PORT_ID_USED: |
| 407 | fcport->loop_id = data[1]; |
| 408 | qla2x00_post_async_logout_work(vha, fcport, NULL); |
| 409 | qla2x00_post_async_login_work(vha, fcport, NULL); |
| 410 | break; |
| 411 | case MBS_LOOP_ID_USED: |
| 412 | fcport->loop_id++; |
| 413 | rval = qla2x00_find_new_loop_id(vha, fcport); |
| 414 | if (rval != QLA_SUCCESS) { |
| 415 | fcport->flags &= ~FCF_ASYNC_SENT; |
| 416 | qla2x00_mark_device_lost(vha, fcport, 1, 0); |
| 417 | break; |
| 418 | } |
| 419 | qla2x00_post_async_login_work(vha, fcport, NULL); |
| 420 | break; |
| 421 | } |
| 422 | return; |
| 423 | } |
| 424 | |
| 425 | void |
| 426 | qla2x00_async_logout_done(struct scsi_qla_host *vha, fc_port_t *fcport, |
| 427 | uint16_t *data) |
| 428 | { |
| 429 | qla2x00_mark_device_lost(vha, fcport, 1, 0); |
| 430 | return; |
| 431 | } |
| 432 | |
| 433 | void |
| 434 | qla2x00_async_adisc_done(struct scsi_qla_host *vha, fc_port_t *fcport, |
| 435 | uint16_t *data) |
| 436 | { |
| 437 | if (data[0] == MBS_COMMAND_COMPLETE) { |
| 438 | qla2x00_update_fcport(vha, fcport); |
| 439 | |
| 440 | return; |
| 441 | } |
| 442 | |
| 443 | /* Retry login. */ |
| 444 | fcport->flags &= ~FCF_ASYNC_SENT; |
| 445 | if (data[1] & QLA_LOGIO_LOGIN_RETRIED) |
| 446 | set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| 447 | else |
| 448 | qla2x00_mark_device_lost(vha, fcport, 1, 0); |
| 449 | |
| 450 | return; |
| 451 | } |
| 452 | |
| 453 | void |
| 454 | qla2x00_async_tm_cmd_done(struct scsi_qla_host *vha, fc_port_t *fcport, |
| 455 | struct srb_iocb *iocb) |
| 456 | { |
| 457 | int rval; |
| 458 | uint32_t flags; |
| 459 | uint16_t lun; |
| 460 | |
| 461 | flags = iocb->u.tmf.flags; |
| 462 | lun = (uint16_t)iocb->u.tmf.lun; |
| 463 | |
| 464 | /* Issue Marker IOCB */ |
| 465 | rval = qla2x00_marker(vha, vha->hw->req_q_map[0], |
| 466 | vha->hw->rsp_q_map[0], fcport->loop_id, lun, |
| 467 | flags == TCF_LUN_RESET ? MK_SYNC_ID_LUN : MK_SYNC_ID); |
| 468 | |
| 469 | if ((rval != QLA_SUCCESS) || iocb->u.tmf.data) { |
| 470 | ql_dbg(ql_dbg_taskm, vha, 0x8030, |
| 471 | "TM IOCB failed (%x).\n", rval); |
| 472 | } |
| 473 | |
| 474 | return; |
| 475 | } |
| 476 | |
| 477 | /****************************************************************************/ |
| 478 | /* QLogic ISP2x00 Hardware Support Functions. */ |
| 479 | /****************************************************************************/ |
| 480 | |
| 481 | /* |
| 482 | * qla2x00_initialize_adapter |
| 483 | * Initialize board. |
| 484 | * |
| 485 | * Input: |
| 486 | * ha = adapter block pointer. |
| 487 | * |
| 488 | * Returns: |
| 489 | * 0 = success |
| 490 | */ |
| 491 | int |
| 492 | qla2x00_initialize_adapter(scsi_qla_host_t *vha) |
| 493 | { |
| 494 | int rval; |
| 495 | struct qla_hw_data *ha = vha->hw; |
| 496 | struct req_que *req = ha->req_q_map[0]; |
| 497 | |
| 498 | /* Clear adapter flags. */ |
| 499 | vha->flags.online = 0; |
| 500 | ha->flags.chip_reset_done = 0; |
| 501 | vha->flags.reset_active = 0; |
| 502 | ha->flags.pci_channel_io_perm_failure = 0; |
| 503 | ha->flags.eeh_busy = 0; |
| 504 | ha->flags.thermal_supported = 1; |
| 505 | atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); |
| 506 | atomic_set(&vha->loop_state, LOOP_DOWN); |
| 507 | vha->device_flags = DFLG_NO_CABLE; |
| 508 | vha->dpc_flags = 0; |
| 509 | vha->flags.management_server_logged_in = 0; |
| 510 | vha->marker_needed = 0; |
| 511 | ha->isp_abort_cnt = 0; |
| 512 | ha->beacon_blink_led = 0; |
| 513 | |
| 514 | set_bit(0, ha->req_qid_map); |
| 515 | set_bit(0, ha->rsp_qid_map); |
| 516 | |
| 517 | ql_log(ql_log_info, vha, 0x0040, |
| 518 | "Configuring PCI space...\n"); |
| 519 | rval = ha->isp_ops->pci_config(vha); |
| 520 | if (rval) { |
| 521 | ql_log(ql_log_warn, vha, 0x0044, |
| 522 | "Unable to configure PCI space.\n"); |
| 523 | return (rval); |
| 524 | } |
| 525 | |
| 526 | ha->isp_ops->reset_chip(vha); |
| 527 | |
| 528 | rval = qla2xxx_get_flash_info(vha); |
| 529 | if (rval) { |
| 530 | ql_log(ql_log_fatal, vha, 0x004f, |
| 531 | "Unable to validate FLASH data.\n"); |
| 532 | return (rval); |
| 533 | } |
| 534 | |
| 535 | ha->isp_ops->get_flash_version(vha, req->ring); |
| 536 | ql_log(ql_log_info, vha, 0x0061, |
| 537 | "Configure NVRAM parameters...\n"); |
| 538 | |
| 539 | ha->isp_ops->nvram_config(vha); |
| 540 | |
| 541 | if (ha->flags.disable_serdes) { |
| 542 | /* Mask HBA via NVRAM settings? */ |
| 543 | ql_log(ql_log_info, vha, 0x0077, |
| 544 | "Masking HBA WWPN " |
| 545 | "%02x%02x%02x%02x%02x%02x%02x%02x (via NVRAM).\n", |
| 546 | vha->port_name[0], vha->port_name[1], |
| 547 | vha->port_name[2], vha->port_name[3], |
| 548 | vha->port_name[4], vha->port_name[5], |
| 549 | vha->port_name[6], vha->port_name[7]); |
| 550 | return QLA_FUNCTION_FAILED; |
| 551 | } |
| 552 | |
| 553 | ql_log(ql_log_info, vha, 0x0078, |
| 554 | "Verifying loaded RISC code...\n"); |
| 555 | |
| 556 | if (qla2x00_isp_firmware(vha) != QLA_SUCCESS) { |
| 557 | rval = ha->isp_ops->chip_diag(vha); |
| 558 | if (rval) |
| 559 | return (rval); |
| 560 | rval = qla2x00_setup_chip(vha); |
| 561 | if (rval) |
| 562 | return (rval); |
| 563 | } |
| 564 | |
| 565 | if (IS_QLA84XX(ha)) { |
| 566 | ha->cs84xx = qla84xx_get_chip(vha); |
| 567 | if (!ha->cs84xx) { |
| 568 | ql_log(ql_log_warn, vha, 0x00d0, |
| 569 | "Unable to configure ISP84XX.\n"); |
| 570 | return QLA_FUNCTION_FAILED; |
| 571 | } |
| 572 | } |
| 573 | rval = qla2x00_init_rings(vha); |
| 574 | ha->flags.chip_reset_done = 1; |
| 575 | |
| 576 | if (rval == QLA_SUCCESS && IS_QLA84XX(ha)) { |
| 577 | /* Issue verify 84xx FW IOCB to complete 84xx initialization */ |
| 578 | rval = qla84xx_init_chip(vha); |
| 579 | if (rval != QLA_SUCCESS) { |
| 580 | ql_log(ql_log_warn, vha, 0x00d4, |
| 581 | "Unable to initialize ISP84XX.\n"); |
| 582 | qla84xx_put_chip(vha); |
| 583 | } |
| 584 | } |
| 585 | |
| 586 | if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha)) |
| 587 | qla24xx_read_fcp_prio_cfg(vha); |
| 588 | |
| 589 | return (rval); |
| 590 | } |
| 591 | |
| 592 | /** |
| 593 | * qla2100_pci_config() - Setup ISP21xx PCI configuration registers. |
| 594 | * @ha: HA context |
| 595 | * |
| 596 | * Returns 0 on success. |
| 597 | */ |
| 598 | int |
| 599 | qla2100_pci_config(scsi_qla_host_t *vha) |
| 600 | { |
| 601 | uint16_t w; |
| 602 | unsigned long flags; |
| 603 | struct qla_hw_data *ha = vha->hw; |
| 604 | struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| 605 | |
| 606 | pci_set_master(ha->pdev); |
| 607 | pci_try_set_mwi(ha->pdev); |
| 608 | |
| 609 | pci_read_config_word(ha->pdev, PCI_COMMAND, &w); |
| 610 | w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); |
| 611 | pci_write_config_word(ha->pdev, PCI_COMMAND, w); |
| 612 | |
| 613 | pci_disable_rom(ha->pdev); |
| 614 | |
| 615 | /* Get PCI bus information. */ |
| 616 | spin_lock_irqsave(&ha->hardware_lock, flags); |
| 617 | ha->pci_attr = RD_REG_WORD(®->ctrl_status); |
| 618 | spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| 619 | |
| 620 | return QLA_SUCCESS; |
| 621 | } |
| 622 | |
| 623 | /** |
| 624 | * qla2300_pci_config() - Setup ISP23xx PCI configuration registers. |
| 625 | * @ha: HA context |
| 626 | * |
| 627 | * Returns 0 on success. |
| 628 | */ |
| 629 | int |
| 630 | qla2300_pci_config(scsi_qla_host_t *vha) |
| 631 | { |
| 632 | uint16_t w; |
| 633 | unsigned long flags = 0; |
| 634 | uint32_t cnt; |
| 635 | struct qla_hw_data *ha = vha->hw; |
| 636 | struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| 637 | |
| 638 | pci_set_master(ha->pdev); |
| 639 | pci_try_set_mwi(ha->pdev); |
| 640 | |
| 641 | pci_read_config_word(ha->pdev, PCI_COMMAND, &w); |
| 642 | w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); |
| 643 | |
| 644 | if (IS_QLA2322(ha) || IS_QLA6322(ha)) |
| 645 | w &= ~PCI_COMMAND_INTX_DISABLE; |
| 646 | pci_write_config_word(ha->pdev, PCI_COMMAND, w); |
| 647 | |
| 648 | /* |
| 649 | * If this is a 2300 card and not 2312, reset the |
| 650 | * COMMAND_INVALIDATE due to a bug in the 2300. Unfortunately, |
| 651 | * the 2310 also reports itself as a 2300 so we need to get the |
| 652 | * fb revision level -- a 6 indicates it really is a 2300 and |
| 653 | * not a 2310. |
| 654 | */ |
| 655 | if (IS_QLA2300(ha)) { |
| 656 | spin_lock_irqsave(&ha->hardware_lock, flags); |
| 657 | |
| 658 | /* Pause RISC. */ |
| 659 | WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); |
| 660 | for (cnt = 0; cnt < 30000; cnt++) { |
| 661 | if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) != 0) |
| 662 | break; |
| 663 | |
| 664 | udelay(10); |
| 665 | } |
| 666 | |
| 667 | /* Select FPM registers. */ |
| 668 | WRT_REG_WORD(®->ctrl_status, 0x20); |
| 669 | RD_REG_WORD(®->ctrl_status); |
| 670 | |
| 671 | /* Get the fb rev level */ |
| 672 | ha->fb_rev = RD_FB_CMD_REG(ha, reg); |
| 673 | |
| 674 | if (ha->fb_rev == FPM_2300) |
| 675 | pci_clear_mwi(ha->pdev); |
| 676 | |
| 677 | /* Deselect FPM registers. */ |
| 678 | WRT_REG_WORD(®->ctrl_status, 0x0); |
| 679 | RD_REG_WORD(®->ctrl_status); |
| 680 | |
| 681 | /* Release RISC module. */ |
| 682 | WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC); |
| 683 | for (cnt = 0; cnt < 30000; cnt++) { |
| 684 | if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) == 0) |
| 685 | break; |
| 686 | |
| 687 | udelay(10); |
| 688 | } |
| 689 | |
| 690 | spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| 691 | } |
| 692 | |
| 693 | pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80); |
| 694 | |
| 695 | pci_disable_rom(ha->pdev); |
| 696 | |
| 697 | /* Get PCI bus information. */ |
| 698 | spin_lock_irqsave(&ha->hardware_lock, flags); |
| 699 | ha->pci_attr = RD_REG_WORD(®->ctrl_status); |
| 700 | spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| 701 | |
| 702 | return QLA_SUCCESS; |
| 703 | } |
| 704 | |
| 705 | /** |
| 706 | * qla24xx_pci_config() - Setup ISP24xx PCI configuration registers. |
| 707 | * @ha: HA context |
| 708 | * |
| 709 | * Returns 0 on success. |
| 710 | */ |
| 711 | int |
| 712 | qla24xx_pci_config(scsi_qla_host_t *vha) |
| 713 | { |
| 714 | uint16_t w; |
| 715 | unsigned long flags = 0; |
| 716 | struct qla_hw_data *ha = vha->hw; |
| 717 | struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; |
| 718 | |
| 719 | pci_set_master(ha->pdev); |
| 720 | pci_try_set_mwi(ha->pdev); |
| 721 | |
| 722 | pci_read_config_word(ha->pdev, PCI_COMMAND, &w); |
| 723 | w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); |
| 724 | w &= ~PCI_COMMAND_INTX_DISABLE; |
| 725 | pci_write_config_word(ha->pdev, PCI_COMMAND, w); |
| 726 | |
| 727 | pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80); |
| 728 | |
| 729 | /* PCI-X -- adjust Maximum Memory Read Byte Count (2048). */ |
| 730 | if (pci_find_capability(ha->pdev, PCI_CAP_ID_PCIX)) |
| 731 | pcix_set_mmrbc(ha->pdev, 2048); |
| 732 | |
| 733 | /* PCIe -- adjust Maximum Read Request Size (2048). */ |
| 734 | if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP)) |
| 735 | pcie_set_readrq(ha->pdev, 2048); |
| 736 | |
| 737 | pci_disable_rom(ha->pdev); |
| 738 | |
| 739 | ha->chip_revision = ha->pdev->revision; |
| 740 | |
| 741 | /* Get PCI bus information. */ |
| 742 | spin_lock_irqsave(&ha->hardware_lock, flags); |
| 743 | ha->pci_attr = RD_REG_DWORD(®->ctrl_status); |
| 744 | spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| 745 | |
| 746 | return QLA_SUCCESS; |
| 747 | } |
| 748 | |
| 749 | /** |
| 750 | * qla25xx_pci_config() - Setup ISP25xx PCI configuration registers. |
| 751 | * @ha: HA context |
| 752 | * |
| 753 | * Returns 0 on success. |
| 754 | */ |
| 755 | int |
| 756 | qla25xx_pci_config(scsi_qla_host_t *vha) |
| 757 | { |
| 758 | uint16_t w; |
| 759 | struct qla_hw_data *ha = vha->hw; |
| 760 | |
| 761 | pci_set_master(ha->pdev); |
| 762 | pci_try_set_mwi(ha->pdev); |
| 763 | |
| 764 | pci_read_config_word(ha->pdev, PCI_COMMAND, &w); |
| 765 | w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); |
| 766 | w &= ~PCI_COMMAND_INTX_DISABLE; |
| 767 | pci_write_config_word(ha->pdev, PCI_COMMAND, w); |
| 768 | |
| 769 | /* PCIe -- adjust Maximum Read Request Size (2048). */ |
| 770 | if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP)) |
| 771 | pcie_set_readrq(ha->pdev, 2048); |
| 772 | |
| 773 | pci_disable_rom(ha->pdev); |
| 774 | |
| 775 | ha->chip_revision = ha->pdev->revision; |
| 776 | |
| 777 | return QLA_SUCCESS; |
| 778 | } |
| 779 | |
| 780 | /** |
| 781 | * qla2x00_isp_firmware() - Choose firmware image. |
| 782 | * @ha: HA context |
| 783 | * |
| 784 | * Returns 0 on success. |
| 785 | */ |
| 786 | static int |
| 787 | qla2x00_isp_firmware(scsi_qla_host_t *vha) |
| 788 | { |
| 789 | int rval; |
| 790 | uint16_t loop_id, topo, sw_cap; |
| 791 | uint8_t domain, area, al_pa; |
| 792 | struct qla_hw_data *ha = vha->hw; |
| 793 | |
| 794 | /* Assume loading risc code */ |
| 795 | rval = QLA_FUNCTION_FAILED; |
| 796 | |
| 797 | if (ha->flags.disable_risc_code_load) { |
| 798 | ql_log(ql_log_info, vha, 0x0079, "RISC CODE NOT loaded.\n"); |
| 799 | |
| 800 | /* Verify checksum of loaded RISC code. */ |
| 801 | rval = qla2x00_verify_checksum(vha, ha->fw_srisc_address); |
| 802 | if (rval == QLA_SUCCESS) { |
| 803 | /* And, verify we are not in ROM code. */ |
| 804 | rval = qla2x00_get_adapter_id(vha, &loop_id, &al_pa, |
| 805 | &area, &domain, &topo, &sw_cap); |
| 806 | } |
| 807 | } |
| 808 | |
| 809 | if (rval) |
| 810 | ql_dbg(ql_dbg_init, vha, 0x007a, |
| 811 | "**** Load RISC code ****.\n"); |
| 812 | |
| 813 | return (rval); |
| 814 | } |
| 815 | |
| 816 | /** |
| 817 | * qla2x00_reset_chip() - Reset ISP chip. |
| 818 | * @ha: HA context |
| 819 | * |
| 820 | * Returns 0 on success. |
| 821 | */ |
| 822 | void |
| 823 | qla2x00_reset_chip(scsi_qla_host_t *vha) |
| 824 | { |
| 825 | unsigned long flags = 0; |
| 826 | struct qla_hw_data *ha = vha->hw; |
| 827 | struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| 828 | uint32_t cnt; |
| 829 | uint16_t cmd; |
| 830 | |
| 831 | if (unlikely(pci_channel_offline(ha->pdev))) |
| 832 | return; |
| 833 | |
| 834 | ha->isp_ops->disable_intrs(ha); |
| 835 | |
| 836 | spin_lock_irqsave(&ha->hardware_lock, flags); |
| 837 | |
| 838 | /* Turn off master enable */ |
| 839 | cmd = 0; |
| 840 | pci_read_config_word(ha->pdev, PCI_COMMAND, &cmd); |
| 841 | cmd &= ~PCI_COMMAND_MASTER; |
| 842 | pci_write_config_word(ha->pdev, PCI_COMMAND, cmd); |
| 843 | |
| 844 | if (!IS_QLA2100(ha)) { |
| 845 | /* Pause RISC. */ |
| 846 | WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); |
| 847 | if (IS_QLA2200(ha) || IS_QLA2300(ha)) { |
| 848 | for (cnt = 0; cnt < 30000; cnt++) { |
| 849 | if ((RD_REG_WORD(®->hccr) & |
| 850 | HCCR_RISC_PAUSE) != 0) |
| 851 | break; |
| 852 | udelay(100); |
| 853 | } |
| 854 | } else { |
| 855 | RD_REG_WORD(®->hccr); /* PCI Posting. */ |
| 856 | udelay(10); |
| 857 | } |
| 858 | |
| 859 | /* Select FPM registers. */ |
| 860 | WRT_REG_WORD(®->ctrl_status, 0x20); |
| 861 | RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ |
| 862 | |
| 863 | /* FPM Soft Reset. */ |
| 864 | WRT_REG_WORD(®->fpm_diag_config, 0x100); |
| 865 | RD_REG_WORD(®->fpm_diag_config); /* PCI Posting. */ |
| 866 | |
| 867 | /* Toggle Fpm Reset. */ |
| 868 | if (!IS_QLA2200(ha)) { |
| 869 | WRT_REG_WORD(®->fpm_diag_config, 0x0); |
| 870 | RD_REG_WORD(®->fpm_diag_config); /* PCI Posting. */ |
| 871 | } |
| 872 | |
| 873 | /* Select frame buffer registers. */ |
| 874 | WRT_REG_WORD(®->ctrl_status, 0x10); |
| 875 | RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ |
| 876 | |
| 877 | /* Reset frame buffer FIFOs. */ |
| 878 | if (IS_QLA2200(ha)) { |
| 879 | WRT_FB_CMD_REG(ha, reg, 0xa000); |
| 880 | RD_FB_CMD_REG(ha, reg); /* PCI Posting. */ |
| 881 | } else { |
| 882 | WRT_FB_CMD_REG(ha, reg, 0x00fc); |
| 883 | |
| 884 | /* Read back fb_cmd until zero or 3 seconds max */ |
| 885 | for (cnt = 0; cnt < 3000; cnt++) { |
| 886 | if ((RD_FB_CMD_REG(ha, reg) & 0xff) == 0) |
| 887 | break; |
| 888 | udelay(100); |
| 889 | } |
| 890 | } |
| 891 | |
| 892 | /* Select RISC module registers. */ |
| 893 | WRT_REG_WORD(®->ctrl_status, 0); |
| 894 | RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ |
| 895 | |
| 896 | /* Reset RISC processor. */ |
| 897 | WRT_REG_WORD(®->hccr, HCCR_RESET_RISC); |
| 898 | RD_REG_WORD(®->hccr); /* PCI Posting. */ |
| 899 | |
| 900 | /* Release RISC processor. */ |
| 901 | WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC); |
| 902 | RD_REG_WORD(®->hccr); /* PCI Posting. */ |
| 903 | } |
| 904 | |
| 905 | WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT); |
| 906 | WRT_REG_WORD(®->hccr, HCCR_CLR_HOST_INT); |
| 907 | |
| 908 | /* Reset ISP chip. */ |
| 909 | WRT_REG_WORD(®->ctrl_status, CSR_ISP_SOFT_RESET); |
| 910 | |
| 911 | /* Wait for RISC to recover from reset. */ |
| 912 | if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) { |
| 913 | /* |
| 914 | * It is necessary to for a delay here since the card doesn't |
| 915 | * respond to PCI reads during a reset. On some architectures |
| 916 | * this will result in an MCA. |
| 917 | */ |
| 918 | udelay(20); |
| 919 | for (cnt = 30000; cnt; cnt--) { |
| 920 | if ((RD_REG_WORD(®->ctrl_status) & |
| 921 | CSR_ISP_SOFT_RESET) == 0) |
| 922 | break; |
| 923 | udelay(100); |
| 924 | } |
| 925 | } else |
| 926 | udelay(10); |
| 927 | |
| 928 | /* Reset RISC processor. */ |
| 929 | WRT_REG_WORD(®->hccr, HCCR_RESET_RISC); |
| 930 | |
| 931 | WRT_REG_WORD(®->semaphore, 0); |
| 932 | |
| 933 | /* Release RISC processor. */ |
| 934 | WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC); |
| 935 | RD_REG_WORD(®->hccr); /* PCI Posting. */ |
| 936 | |
| 937 | if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) { |
| 938 | for (cnt = 0; cnt < 30000; cnt++) { |
| 939 | if (RD_MAILBOX_REG(ha, reg, 0) != MBS_BUSY) |
| 940 | break; |
| 941 | |
| 942 | udelay(100); |
| 943 | } |
| 944 | } else |
| 945 | udelay(100); |
| 946 | |
| 947 | /* Turn on master enable */ |
| 948 | cmd |= PCI_COMMAND_MASTER; |
| 949 | pci_write_config_word(ha->pdev, PCI_COMMAND, cmd); |
| 950 | |
| 951 | /* Disable RISC pause on FPM parity error. */ |
| 952 | if (!IS_QLA2100(ha)) { |
| 953 | WRT_REG_WORD(®->hccr, HCCR_DISABLE_PARITY_PAUSE); |
| 954 | RD_REG_WORD(®->hccr); /* PCI Posting. */ |
| 955 | } |
| 956 | |
| 957 | spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| 958 | } |
| 959 | |
| 960 | /** |
| 961 | * qla81xx_reset_mpi() - Reset's MPI FW via Write MPI Register MBC. |
| 962 | * |
| 963 | * Returns 0 on success. |
| 964 | */ |
| 965 | int |
| 966 | qla81xx_reset_mpi(scsi_qla_host_t *vha) |
| 967 | { |
| 968 | uint16_t mb[4] = {0x1010, 0, 1, 0}; |
| 969 | |
| 970 | return qla81xx_write_mpi_register(vha, mb); |
| 971 | } |
| 972 | |
| 973 | /** |
| 974 | * qla24xx_reset_risc() - Perform full reset of ISP24xx RISC. |
| 975 | * @ha: HA context |
| 976 | * |
| 977 | * Returns 0 on success. |
| 978 | */ |
| 979 | static inline void |
| 980 | qla24xx_reset_risc(scsi_qla_host_t *vha) |
| 981 | { |
| 982 | unsigned long flags = 0; |
| 983 | struct qla_hw_data *ha = vha->hw; |
| 984 | struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; |
| 985 | uint32_t cnt, d2; |
| 986 | uint16_t wd; |
| 987 | static int abts_cnt; /* ISP abort retry counts */ |
| 988 | |
| 989 | spin_lock_irqsave(&ha->hardware_lock, flags); |
| 990 | |
| 991 | /* Reset RISC. */ |
| 992 | WRT_REG_DWORD(®->ctrl_status, CSRX_DMA_SHUTDOWN|MWB_4096_BYTES); |
| 993 | for (cnt = 0; cnt < 30000; cnt++) { |
| 994 | if ((RD_REG_DWORD(®->ctrl_status) & CSRX_DMA_ACTIVE) == 0) |
| 995 | break; |
| 996 | |
| 997 | udelay(10); |
| 998 | } |
| 999 | |
| 1000 | WRT_REG_DWORD(®->ctrl_status, |
| 1001 | CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES); |
| 1002 | pci_read_config_word(ha->pdev, PCI_COMMAND, &wd); |
| 1003 | |
| 1004 | udelay(100); |
| 1005 | /* Wait for firmware to complete NVRAM accesses. */ |
| 1006 | d2 = (uint32_t) RD_REG_WORD(®->mailbox0); |
| 1007 | for (cnt = 10000 ; cnt && d2; cnt--) { |
| 1008 | udelay(5); |
| 1009 | d2 = (uint32_t) RD_REG_WORD(®->mailbox0); |
| 1010 | barrier(); |
| 1011 | } |
| 1012 | |
| 1013 | /* Wait for soft-reset to complete. */ |
| 1014 | d2 = RD_REG_DWORD(®->ctrl_status); |
| 1015 | for (cnt = 6000000 ; cnt && (d2 & CSRX_ISP_SOFT_RESET); cnt--) { |
| 1016 | udelay(5); |
| 1017 | d2 = RD_REG_DWORD(®->ctrl_status); |
| 1018 | barrier(); |
| 1019 | } |
| 1020 | |
| 1021 | /* If required, do an MPI FW reset now */ |
| 1022 | if (test_and_clear_bit(MPI_RESET_NEEDED, &vha->dpc_flags)) { |
| 1023 | if (qla81xx_reset_mpi(vha) != QLA_SUCCESS) { |
| 1024 | if (++abts_cnt < 5) { |
| 1025 | set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); |
| 1026 | set_bit(MPI_RESET_NEEDED, &vha->dpc_flags); |
| 1027 | } else { |
| 1028 | /* |
| 1029 | * We exhausted the ISP abort retries. We have to |
| 1030 | * set the board offline. |
| 1031 | */ |
| 1032 | abts_cnt = 0; |
| 1033 | vha->flags.online = 0; |
| 1034 | } |
| 1035 | } |
| 1036 | } |
| 1037 | |
| 1038 | WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_RESET); |
| 1039 | RD_REG_DWORD(®->hccr); |
| 1040 | |
| 1041 | WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE); |
| 1042 | RD_REG_DWORD(®->hccr); |
| 1043 | |
| 1044 | WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_RESET); |
| 1045 | RD_REG_DWORD(®->hccr); |
| 1046 | |
| 1047 | d2 = (uint32_t) RD_REG_WORD(®->mailbox0); |
| 1048 | for (cnt = 6000000 ; cnt && d2; cnt--) { |
| 1049 | udelay(5); |
| 1050 | d2 = (uint32_t) RD_REG_WORD(®->mailbox0); |
| 1051 | barrier(); |
| 1052 | } |
| 1053 | |
| 1054 | spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| 1055 | |
| 1056 | if (IS_NOPOLLING_TYPE(ha)) |
| 1057 | ha->isp_ops->enable_intrs(ha); |
| 1058 | } |
| 1059 | |
| 1060 | /** |
| 1061 | * qla24xx_reset_chip() - Reset ISP24xx chip. |
| 1062 | * @ha: HA context |
| 1063 | * |
| 1064 | * Returns 0 on success. |
| 1065 | */ |
| 1066 | void |
| 1067 | qla24xx_reset_chip(scsi_qla_host_t *vha) |
| 1068 | { |
| 1069 | struct qla_hw_data *ha = vha->hw; |
| 1070 | |
| 1071 | if (pci_channel_offline(ha->pdev) && |
| 1072 | ha->flags.pci_channel_io_perm_failure) { |
| 1073 | return; |
| 1074 | } |
| 1075 | |
| 1076 | ha->isp_ops->disable_intrs(ha); |
| 1077 | |
| 1078 | /* Perform RISC reset. */ |
| 1079 | qla24xx_reset_risc(vha); |
| 1080 | } |
| 1081 | |
| 1082 | /** |
| 1083 | * qla2x00_chip_diag() - Test chip for proper operation. |
| 1084 | * @ha: HA context |
| 1085 | * |
| 1086 | * Returns 0 on success. |
| 1087 | */ |
| 1088 | int |
| 1089 | qla2x00_chip_diag(scsi_qla_host_t *vha) |
| 1090 | { |
| 1091 | int rval; |
| 1092 | struct qla_hw_data *ha = vha->hw; |
| 1093 | struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| 1094 | unsigned long flags = 0; |
| 1095 | uint16_t data; |
| 1096 | uint32_t cnt; |
| 1097 | uint16_t mb[5]; |
| 1098 | struct req_que *req = ha->req_q_map[0]; |
| 1099 | |
| 1100 | /* Assume a failed state */ |
| 1101 | rval = QLA_FUNCTION_FAILED; |
| 1102 | |
| 1103 | ql_dbg(ql_dbg_init, vha, 0x007b, |
| 1104 | "Testing device at %lx.\n", (u_long)®->flash_address); |
| 1105 | |
| 1106 | spin_lock_irqsave(&ha->hardware_lock, flags); |
| 1107 | |
| 1108 | /* Reset ISP chip. */ |
| 1109 | WRT_REG_WORD(®->ctrl_status, CSR_ISP_SOFT_RESET); |
| 1110 | |
| 1111 | /* |
| 1112 | * We need to have a delay here since the card will not respond while |
| 1113 | * in reset causing an MCA on some architectures. |
| 1114 | */ |
| 1115 | udelay(20); |
| 1116 | data = qla2x00_debounce_register(®->ctrl_status); |
| 1117 | for (cnt = 6000000 ; cnt && (data & CSR_ISP_SOFT_RESET); cnt--) { |
| 1118 | udelay(5); |
| 1119 | data = RD_REG_WORD(®->ctrl_status); |
| 1120 | barrier(); |
| 1121 | } |
| 1122 | |
| 1123 | if (!cnt) |
| 1124 | goto chip_diag_failed; |
| 1125 | |
| 1126 | ql_dbg(ql_dbg_init, vha, 0x007c, |
| 1127 | "Reset register cleared by chip reset.\n"); |
| 1128 | |
| 1129 | /* Reset RISC processor. */ |
| 1130 | WRT_REG_WORD(®->hccr, HCCR_RESET_RISC); |
| 1131 | WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC); |
| 1132 | |
| 1133 | /* Workaround for QLA2312 PCI parity error */ |
| 1134 | if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) { |
| 1135 | data = qla2x00_debounce_register(MAILBOX_REG(ha, reg, 0)); |
| 1136 | for (cnt = 6000000; cnt && (data == MBS_BUSY); cnt--) { |
| 1137 | udelay(5); |
| 1138 | data = RD_MAILBOX_REG(ha, reg, 0); |
| 1139 | barrier(); |
| 1140 | } |
| 1141 | } else |
| 1142 | udelay(10); |
| 1143 | |
| 1144 | if (!cnt) |
| 1145 | goto chip_diag_failed; |
| 1146 | |
| 1147 | /* Check product ID of chip */ |
| 1148 | ql_dbg(ql_dbg_init, vha, 0x007d, "Checking product Id of chip.\n"); |
| 1149 | |
| 1150 | mb[1] = RD_MAILBOX_REG(ha, reg, 1); |
| 1151 | mb[2] = RD_MAILBOX_REG(ha, reg, 2); |
| 1152 | mb[3] = RD_MAILBOX_REG(ha, reg, 3); |
| 1153 | mb[4] = qla2x00_debounce_register(MAILBOX_REG(ha, reg, 4)); |
| 1154 | if (mb[1] != PROD_ID_1 || (mb[2] != PROD_ID_2 && mb[2] != PROD_ID_2a) || |
| 1155 | mb[3] != PROD_ID_3) { |
| 1156 | ql_log(ql_log_warn, vha, 0x0062, |
| 1157 | "Wrong product ID = 0x%x,0x%x,0x%x.\n", |
| 1158 | mb[1], mb[2], mb[3]); |
| 1159 | |
| 1160 | goto chip_diag_failed; |
| 1161 | } |
| 1162 | ha->product_id[0] = mb[1]; |
| 1163 | ha->product_id[1] = mb[2]; |
| 1164 | ha->product_id[2] = mb[3]; |
| 1165 | ha->product_id[3] = mb[4]; |
| 1166 | |
| 1167 | /* Adjust fw RISC transfer size */ |
| 1168 | if (req->length > 1024) |
| 1169 | ha->fw_transfer_size = REQUEST_ENTRY_SIZE * 1024; |
| 1170 | else |
| 1171 | ha->fw_transfer_size = REQUEST_ENTRY_SIZE * |
| 1172 | req->length; |
| 1173 | |
| 1174 | if (IS_QLA2200(ha) && |
| 1175 | RD_MAILBOX_REG(ha, reg, 7) == QLA2200A_RISC_ROM_VER) { |
| 1176 | /* Limit firmware transfer size with a 2200A */ |
| 1177 | ql_dbg(ql_dbg_init, vha, 0x007e, "Found QLA2200A Chip.\n"); |
| 1178 | |
| 1179 | ha->device_type |= DT_ISP2200A; |
| 1180 | ha->fw_transfer_size = 128; |
| 1181 | } |
| 1182 | |
| 1183 | /* Wrap Incoming Mailboxes Test. */ |
| 1184 | spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| 1185 | |
| 1186 | ql_dbg(ql_dbg_init, vha, 0x007f, "Checking mailboxes.\n"); |
| 1187 | rval = qla2x00_mbx_reg_test(vha); |
| 1188 | if (rval) |
| 1189 | ql_log(ql_log_warn, vha, 0x0080, |
| 1190 | "Failed mailbox send register test.\n"); |
| 1191 | else |
| 1192 | /* Flag a successful rval */ |
| 1193 | rval = QLA_SUCCESS; |
| 1194 | spin_lock_irqsave(&ha->hardware_lock, flags); |
| 1195 | |
| 1196 | chip_diag_failed: |
| 1197 | if (rval) |
| 1198 | ql_log(ql_log_info, vha, 0x0081, |
| 1199 | "Chip diagnostics **** FAILED ****.\n"); |
| 1200 | |
| 1201 | spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| 1202 | |
| 1203 | return (rval); |
| 1204 | } |
| 1205 | |
| 1206 | /** |
| 1207 | * qla24xx_chip_diag() - Test ISP24xx for proper operation. |
| 1208 | * @ha: HA context |
| 1209 | * |
| 1210 | * Returns 0 on success. |
| 1211 | */ |
| 1212 | int |
| 1213 | qla24xx_chip_diag(scsi_qla_host_t *vha) |
| 1214 | { |
| 1215 | int rval; |
| 1216 | struct qla_hw_data *ha = vha->hw; |
| 1217 | struct req_que *req = ha->req_q_map[0]; |
| 1218 | |
| 1219 | if (IS_QLA82XX(ha)) |
| 1220 | return QLA_SUCCESS; |
| 1221 | |
| 1222 | ha->fw_transfer_size = REQUEST_ENTRY_SIZE * req->length; |
| 1223 | |
| 1224 | rval = qla2x00_mbx_reg_test(vha); |
| 1225 | if (rval) { |
| 1226 | ql_log(ql_log_warn, vha, 0x0082, |
| 1227 | "Failed mailbox send register test.\n"); |
| 1228 | } else { |
| 1229 | /* Flag a successful rval */ |
| 1230 | rval = QLA_SUCCESS; |
| 1231 | } |
| 1232 | |
| 1233 | return rval; |
| 1234 | } |
| 1235 | |
| 1236 | void |
| 1237 | qla2x00_alloc_fw_dump(scsi_qla_host_t *vha) |
| 1238 | { |
| 1239 | int rval; |
| 1240 | uint32_t dump_size, fixed_size, mem_size, req_q_size, rsp_q_size, |
| 1241 | eft_size, fce_size, mq_size; |
| 1242 | dma_addr_t tc_dma; |
| 1243 | void *tc; |
| 1244 | struct qla_hw_data *ha = vha->hw; |
| 1245 | struct req_que *req = ha->req_q_map[0]; |
| 1246 | struct rsp_que *rsp = ha->rsp_q_map[0]; |
| 1247 | |
| 1248 | if (ha->fw_dump) { |
| 1249 | ql_dbg(ql_dbg_init, vha, 0x00bd, |
| 1250 | "Firmware dump already allocated.\n"); |
| 1251 | return; |
| 1252 | } |
| 1253 | |
| 1254 | ha->fw_dumped = 0; |
| 1255 | fixed_size = mem_size = eft_size = fce_size = mq_size = 0; |
| 1256 | if (IS_QLA2100(ha) || IS_QLA2200(ha)) { |
| 1257 | fixed_size = sizeof(struct qla2100_fw_dump); |
| 1258 | } else if (IS_QLA23XX(ha)) { |
| 1259 | fixed_size = offsetof(struct qla2300_fw_dump, data_ram); |
| 1260 | mem_size = (ha->fw_memory_size - 0x11000 + 1) * |
| 1261 | sizeof(uint16_t); |
| 1262 | } else if (IS_FWI2_CAPABLE(ha)) { |
| 1263 | if (IS_QLA81XX(ha)) |
| 1264 | fixed_size = offsetof(struct qla81xx_fw_dump, ext_mem); |
| 1265 | else if (IS_QLA25XX(ha)) |
| 1266 | fixed_size = offsetof(struct qla25xx_fw_dump, ext_mem); |
| 1267 | else |
| 1268 | fixed_size = offsetof(struct qla24xx_fw_dump, ext_mem); |
| 1269 | mem_size = (ha->fw_memory_size - 0x100000 + 1) * |
| 1270 | sizeof(uint32_t); |
| 1271 | if (ha->mqenable) |
| 1272 | mq_size = sizeof(struct qla2xxx_mq_chain); |
| 1273 | /* Allocate memory for Fibre Channel Event Buffer. */ |
| 1274 | if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)) |
| 1275 | goto try_eft; |
| 1276 | |
| 1277 | tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma, |
| 1278 | GFP_KERNEL); |
| 1279 | if (!tc) { |
| 1280 | ql_log(ql_log_warn, vha, 0x00be, |
| 1281 | "Unable to allocate (%d KB) for FCE.\n", |
| 1282 | FCE_SIZE / 1024); |
| 1283 | goto try_eft; |
| 1284 | } |
| 1285 | |
| 1286 | memset(tc, 0, FCE_SIZE); |
| 1287 | rval = qla2x00_enable_fce_trace(vha, tc_dma, FCE_NUM_BUFFERS, |
| 1288 | ha->fce_mb, &ha->fce_bufs); |
| 1289 | if (rval) { |
| 1290 | ql_log(ql_log_warn, vha, 0x00bf, |
| 1291 | "Unable to initialize FCE (%d).\n", rval); |
| 1292 | dma_free_coherent(&ha->pdev->dev, FCE_SIZE, tc, |
| 1293 | tc_dma); |
| 1294 | ha->flags.fce_enabled = 0; |
| 1295 | goto try_eft; |
| 1296 | } |
| 1297 | ql_log(ql_log_info, vha, 0x00c0, |
| 1298 | "Allocate (%d KB) for FCE...\n", FCE_SIZE / 1024); |
| 1299 | |
| 1300 | fce_size = sizeof(struct qla2xxx_fce_chain) + FCE_SIZE; |
| 1301 | ha->flags.fce_enabled = 1; |
| 1302 | ha->fce_dma = tc_dma; |
| 1303 | ha->fce = tc; |
| 1304 | try_eft: |
| 1305 | /* Allocate memory for Extended Trace Buffer. */ |
| 1306 | tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma, |
| 1307 | GFP_KERNEL); |
| 1308 | if (!tc) { |
| 1309 | ql_log(ql_log_warn, vha, 0x00c1, |
| 1310 | "Unable to allocate (%d KB) for EFT.\n", |
| 1311 | EFT_SIZE / 1024); |
| 1312 | goto cont_alloc; |
| 1313 | } |
| 1314 | |
| 1315 | memset(tc, 0, EFT_SIZE); |
| 1316 | rval = qla2x00_enable_eft_trace(vha, tc_dma, EFT_NUM_BUFFERS); |
| 1317 | if (rval) { |
| 1318 | ql_log(ql_log_warn, vha, 0x00c2, |
| 1319 | "Unable to initialize EFT (%d).\n", rval); |
| 1320 | dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc, |
| 1321 | tc_dma); |
| 1322 | goto cont_alloc; |
| 1323 | } |
| 1324 | ql_log(ql_log_info, vha, 0x00c3, |
| 1325 | "Allocated (%d KB) EFT ...\n", EFT_SIZE / 1024); |
| 1326 | |
| 1327 | eft_size = EFT_SIZE; |
| 1328 | ha->eft_dma = tc_dma; |
| 1329 | ha->eft = tc; |
| 1330 | } |
| 1331 | cont_alloc: |
| 1332 | req_q_size = req->length * sizeof(request_t); |
| 1333 | rsp_q_size = rsp->length * sizeof(response_t); |
| 1334 | |
| 1335 | dump_size = offsetof(struct qla2xxx_fw_dump, isp); |
| 1336 | dump_size += fixed_size + mem_size + req_q_size + rsp_q_size + eft_size; |
| 1337 | ha->chain_offset = dump_size; |
| 1338 | dump_size += mq_size + fce_size; |
| 1339 | |
| 1340 | ha->fw_dump = vmalloc(dump_size); |
| 1341 | if (!ha->fw_dump) { |
| 1342 | ql_log(ql_log_warn, vha, 0x00c4, |
| 1343 | "Unable to allocate (%d KB) for firmware dump.\n", |
| 1344 | dump_size / 1024); |
| 1345 | |
| 1346 | if (ha->fce) { |
| 1347 | dma_free_coherent(&ha->pdev->dev, FCE_SIZE, ha->fce, |
| 1348 | ha->fce_dma); |
| 1349 | ha->fce = NULL; |
| 1350 | ha->fce_dma = 0; |
| 1351 | } |
| 1352 | |
| 1353 | if (ha->eft) { |
| 1354 | dma_free_coherent(&ha->pdev->dev, eft_size, ha->eft, |
| 1355 | ha->eft_dma); |
| 1356 | ha->eft = NULL; |
| 1357 | ha->eft_dma = 0; |
| 1358 | } |
| 1359 | return; |
| 1360 | } |
| 1361 | ql_log(ql_log_info, vha, 0x00c5, |
| 1362 | "Allocated (%d KB) for firmware dump.\n", dump_size / 1024); |
| 1363 | |
| 1364 | ha->fw_dump_len = dump_size; |
| 1365 | ha->fw_dump->signature[0] = 'Q'; |
| 1366 | ha->fw_dump->signature[1] = 'L'; |
| 1367 | ha->fw_dump->signature[2] = 'G'; |
| 1368 | ha->fw_dump->signature[3] = 'C'; |
| 1369 | ha->fw_dump->version = __constant_htonl(1); |
| 1370 | |
| 1371 | ha->fw_dump->fixed_size = htonl(fixed_size); |
| 1372 | ha->fw_dump->mem_size = htonl(mem_size); |
| 1373 | ha->fw_dump->req_q_size = htonl(req_q_size); |
| 1374 | ha->fw_dump->rsp_q_size = htonl(rsp_q_size); |
| 1375 | |
| 1376 | ha->fw_dump->eft_size = htonl(eft_size); |
| 1377 | ha->fw_dump->eft_addr_l = htonl(LSD(ha->eft_dma)); |
| 1378 | ha->fw_dump->eft_addr_h = htonl(MSD(ha->eft_dma)); |
| 1379 | |
| 1380 | ha->fw_dump->header_size = |
| 1381 | htonl(offsetof(struct qla2xxx_fw_dump, isp)); |
| 1382 | } |
| 1383 | |
| 1384 | static int |
| 1385 | qla81xx_mpi_sync(scsi_qla_host_t *vha) |
| 1386 | { |
| 1387 | #define MPS_MASK 0xe0 |
| 1388 | int rval; |
| 1389 | uint16_t dc; |
| 1390 | uint32_t dw; |
| 1391 | |
| 1392 | if (!IS_QLA81XX(vha->hw)) |
| 1393 | return QLA_SUCCESS; |
| 1394 | |
| 1395 | rval = qla2x00_write_ram_word(vha, 0x7c00, 1); |
| 1396 | if (rval != QLA_SUCCESS) { |
| 1397 | ql_log(ql_log_warn, vha, 0x0105, |
| 1398 | "Unable to acquire semaphore.\n"); |
| 1399 | goto done; |
| 1400 | } |
| 1401 | |
| 1402 | pci_read_config_word(vha->hw->pdev, 0x54, &dc); |
| 1403 | rval = qla2x00_read_ram_word(vha, 0x7a15, &dw); |
| 1404 | if (rval != QLA_SUCCESS) { |
| 1405 | ql_log(ql_log_warn, vha, 0x0067, "Unable to read sync.\n"); |
| 1406 | goto done_release; |
| 1407 | } |
| 1408 | |
| 1409 | dc &= MPS_MASK; |
| 1410 | if (dc == (dw & MPS_MASK)) |
| 1411 | goto done_release; |
| 1412 | |
| 1413 | dw &= ~MPS_MASK; |
| 1414 | dw |= dc; |
| 1415 | rval = qla2x00_write_ram_word(vha, 0x7a15, dw); |
| 1416 | if (rval != QLA_SUCCESS) { |
| 1417 | ql_log(ql_log_warn, vha, 0x0114, "Unable to gain sync.\n"); |
| 1418 | } |
| 1419 | |
| 1420 | done_release: |
| 1421 | rval = qla2x00_write_ram_word(vha, 0x7c00, 0); |
| 1422 | if (rval != QLA_SUCCESS) { |
| 1423 | ql_log(ql_log_warn, vha, 0x006d, |
| 1424 | "Unable to release semaphore.\n"); |
| 1425 | } |
| 1426 | |
| 1427 | done: |
| 1428 | return rval; |
| 1429 | } |
| 1430 | |
| 1431 | /** |
| 1432 | * qla2x00_setup_chip() - Load and start RISC firmware. |
| 1433 | * @ha: HA context |
| 1434 | * |
| 1435 | * Returns 0 on success. |
| 1436 | */ |
| 1437 | static int |
| 1438 | qla2x00_setup_chip(scsi_qla_host_t *vha) |
| 1439 | { |
| 1440 | int rval; |
| 1441 | uint32_t srisc_address = 0; |
| 1442 | struct qla_hw_data *ha = vha->hw; |
| 1443 | struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| 1444 | unsigned long flags; |
| 1445 | uint16_t fw_major_version; |
| 1446 | |
| 1447 | if (IS_QLA82XX(ha)) { |
| 1448 | rval = ha->isp_ops->load_risc(vha, &srisc_address); |
| 1449 | if (rval == QLA_SUCCESS) { |
| 1450 | qla2x00_stop_firmware(vha); |
| 1451 | goto enable_82xx_npiv; |
| 1452 | } else |
| 1453 | goto failed; |
| 1454 | } |
| 1455 | |
| 1456 | if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) { |
| 1457 | /* Disable SRAM, Instruction RAM and GP RAM parity. */ |
| 1458 | spin_lock_irqsave(&ha->hardware_lock, flags); |
| 1459 | WRT_REG_WORD(®->hccr, (HCCR_ENABLE_PARITY + 0x0)); |
| 1460 | RD_REG_WORD(®->hccr); |
| 1461 | spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| 1462 | } |
| 1463 | |
| 1464 | qla81xx_mpi_sync(vha); |
| 1465 | |
| 1466 | /* Load firmware sequences */ |
| 1467 | rval = ha->isp_ops->load_risc(vha, &srisc_address); |
| 1468 | if (rval == QLA_SUCCESS) { |
| 1469 | ql_dbg(ql_dbg_init, vha, 0x00c9, |
| 1470 | "Verifying Checksum of loaded RISC code.\n"); |
| 1471 | |
| 1472 | rval = qla2x00_verify_checksum(vha, srisc_address); |
| 1473 | if (rval == QLA_SUCCESS) { |
| 1474 | /* Start firmware execution. */ |
| 1475 | ql_dbg(ql_dbg_init, vha, 0x00ca, |
| 1476 | "Starting firmware.\n"); |
| 1477 | |
| 1478 | rval = qla2x00_execute_fw(vha, srisc_address); |
| 1479 | /* Retrieve firmware information. */ |
| 1480 | if (rval == QLA_SUCCESS) { |
| 1481 | enable_82xx_npiv: |
| 1482 | fw_major_version = ha->fw_major_version; |
| 1483 | if (IS_QLA82XX(ha)) |
| 1484 | qla82xx_check_md_needed(vha); |
| 1485 | else { |
| 1486 | rval = qla2x00_get_fw_version(vha, |
| 1487 | &ha->fw_major_version, |
| 1488 | &ha->fw_minor_version, |
| 1489 | &ha->fw_subminor_version, |
| 1490 | &ha->fw_attributes, |
| 1491 | &ha->fw_memory_size, |
| 1492 | ha->mpi_version, |
| 1493 | &ha->mpi_capabilities, |
| 1494 | ha->phy_version); |
| 1495 | } |
| 1496 | if (rval != QLA_SUCCESS) |
| 1497 | goto failed; |
| 1498 | ha->flags.npiv_supported = 0; |
| 1499 | if (IS_QLA2XXX_MIDTYPE(ha) && |
| 1500 | (ha->fw_attributes & BIT_2)) { |
| 1501 | ha->flags.npiv_supported = 1; |
| 1502 | if ((!ha->max_npiv_vports) || |
| 1503 | ((ha->max_npiv_vports + 1) % |
| 1504 | MIN_MULTI_ID_FABRIC)) |
| 1505 | ha->max_npiv_vports = |
| 1506 | MIN_MULTI_ID_FABRIC - 1; |
| 1507 | } |
| 1508 | qla2x00_get_resource_cnts(vha, NULL, |
| 1509 | &ha->fw_xcb_count, NULL, NULL, |
| 1510 | &ha->max_npiv_vports, NULL); |
| 1511 | |
| 1512 | if (!fw_major_version && ql2xallocfwdump |
| 1513 | && !IS_QLA82XX(ha)) |
| 1514 | qla2x00_alloc_fw_dump(vha); |
| 1515 | } |
| 1516 | } else { |
| 1517 | ql_log(ql_log_fatal, vha, 0x00cd, |
| 1518 | "ISP Firmware failed checksum.\n"); |
| 1519 | goto failed; |
| 1520 | } |
| 1521 | } |
| 1522 | |
| 1523 | if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) { |
| 1524 | /* Enable proper parity. */ |
| 1525 | spin_lock_irqsave(&ha->hardware_lock, flags); |
| 1526 | if (IS_QLA2300(ha)) |
| 1527 | /* SRAM parity */ |
| 1528 | WRT_REG_WORD(®->hccr, HCCR_ENABLE_PARITY + 0x1); |
| 1529 | else |
| 1530 | /* SRAM, Instruction RAM and GP RAM parity */ |
| 1531 | WRT_REG_WORD(®->hccr, HCCR_ENABLE_PARITY + 0x7); |
| 1532 | RD_REG_WORD(®->hccr); |
| 1533 | spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| 1534 | } |
| 1535 | |
| 1536 | if (rval == QLA_SUCCESS && IS_FAC_REQUIRED(ha)) { |
| 1537 | uint32_t size; |
| 1538 | |
| 1539 | rval = qla81xx_fac_get_sector_size(vha, &size); |
| 1540 | if (rval == QLA_SUCCESS) { |
| 1541 | ha->flags.fac_supported = 1; |
| 1542 | ha->fdt_block_size = size << 2; |
| 1543 | } else { |
| 1544 | ql_log(ql_log_warn, vha, 0x00ce, |
| 1545 | "Unsupported FAC firmware (%d.%02d.%02d).\n", |
| 1546 | ha->fw_major_version, ha->fw_minor_version, |
| 1547 | ha->fw_subminor_version); |
| 1548 | } |
| 1549 | } |
| 1550 | failed: |
| 1551 | if (rval) { |
| 1552 | ql_log(ql_log_fatal, vha, 0x00cf, |
| 1553 | "Setup chip ****FAILED****.\n"); |
| 1554 | } |
| 1555 | |
| 1556 | return (rval); |
| 1557 | } |
| 1558 | |
| 1559 | /** |
| 1560 | * qla2x00_init_response_q_entries() - Initializes response queue entries. |
| 1561 | * @ha: HA context |
| 1562 | * |
| 1563 | * Beginning of request ring has initialization control block already built |
| 1564 | * by nvram config routine. |
| 1565 | * |
| 1566 | * Returns 0 on success. |
| 1567 | */ |
| 1568 | void |
| 1569 | qla2x00_init_response_q_entries(struct rsp_que *rsp) |
| 1570 | { |
| 1571 | uint16_t cnt; |
| 1572 | response_t *pkt; |
| 1573 | |
| 1574 | rsp->ring_ptr = rsp->ring; |
| 1575 | rsp->ring_index = 0; |
| 1576 | rsp->status_srb = NULL; |
| 1577 | pkt = rsp->ring_ptr; |
| 1578 | for (cnt = 0; cnt < rsp->length; cnt++) { |
| 1579 | pkt->signature = RESPONSE_PROCESSED; |
| 1580 | pkt++; |
| 1581 | } |
| 1582 | } |
| 1583 | |
| 1584 | /** |
| 1585 | * qla2x00_update_fw_options() - Read and process firmware options. |
| 1586 | * @ha: HA context |
| 1587 | * |
| 1588 | * Returns 0 on success. |
| 1589 | */ |
| 1590 | void |
| 1591 | qla2x00_update_fw_options(scsi_qla_host_t *vha) |
| 1592 | { |
| 1593 | uint16_t swing, emphasis, tx_sens, rx_sens; |
| 1594 | struct qla_hw_data *ha = vha->hw; |
| 1595 | |
| 1596 | memset(ha->fw_options, 0, sizeof(ha->fw_options)); |
| 1597 | qla2x00_get_fw_options(vha, ha->fw_options); |
| 1598 | |
| 1599 | if (IS_QLA2100(ha) || IS_QLA2200(ha)) |
| 1600 | return; |
| 1601 | |
| 1602 | /* Serial Link options. */ |
| 1603 | ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x0115, |
| 1604 | "Serial link options.\n"); |
| 1605 | ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0109, |
| 1606 | (uint8_t *)&ha->fw_seriallink_options, |
| 1607 | sizeof(ha->fw_seriallink_options)); |
| 1608 | |
| 1609 | ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING; |
| 1610 | if (ha->fw_seriallink_options[3] & BIT_2) { |
| 1611 | ha->fw_options[1] |= FO1_SET_EMPHASIS_SWING; |
| 1612 | |
| 1613 | /* 1G settings */ |
| 1614 | swing = ha->fw_seriallink_options[2] & (BIT_2 | BIT_1 | BIT_0); |
| 1615 | emphasis = (ha->fw_seriallink_options[2] & |
| 1616 | (BIT_4 | BIT_3)) >> 3; |
| 1617 | tx_sens = ha->fw_seriallink_options[0] & |
| 1618 | (BIT_3 | BIT_2 | BIT_1 | BIT_0); |
| 1619 | rx_sens = (ha->fw_seriallink_options[0] & |
| 1620 | (BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4; |
| 1621 | ha->fw_options[10] = (emphasis << 14) | (swing << 8); |
| 1622 | if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) { |
| 1623 | if (rx_sens == 0x0) |
| 1624 | rx_sens = 0x3; |
| 1625 | ha->fw_options[10] |= (tx_sens << 4) | rx_sens; |
| 1626 | } else if (IS_QLA2322(ha) || IS_QLA6322(ha)) |
| 1627 | ha->fw_options[10] |= BIT_5 | |
| 1628 | ((rx_sens & (BIT_1 | BIT_0)) << 2) | |
| 1629 | (tx_sens & (BIT_1 | BIT_0)); |
| 1630 | |
| 1631 | /* 2G settings */ |
| 1632 | swing = (ha->fw_seriallink_options[2] & |
| 1633 | (BIT_7 | BIT_6 | BIT_5)) >> 5; |
| 1634 | emphasis = ha->fw_seriallink_options[3] & (BIT_1 | BIT_0); |
| 1635 | tx_sens = ha->fw_seriallink_options[1] & |
| 1636 | (BIT_3 | BIT_2 | BIT_1 | BIT_0); |
| 1637 | rx_sens = (ha->fw_seriallink_options[1] & |
| 1638 | (BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4; |
| 1639 | ha->fw_options[11] = (emphasis << 14) | (swing << 8); |
| 1640 | if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) { |
| 1641 | if (rx_sens == 0x0) |
| 1642 | rx_sens = 0x3; |
| 1643 | ha->fw_options[11] |= (tx_sens << 4) | rx_sens; |
| 1644 | } else if (IS_QLA2322(ha) || IS_QLA6322(ha)) |
| 1645 | ha->fw_options[11] |= BIT_5 | |
| 1646 | ((rx_sens & (BIT_1 | BIT_0)) << 2) | |
| 1647 | (tx_sens & (BIT_1 | BIT_0)); |
| 1648 | } |
| 1649 | |
| 1650 | /* FCP2 options. */ |
| 1651 | /* Return command IOCBs without waiting for an ABTS to complete. */ |
| 1652 | ha->fw_options[3] |= BIT_13; |
| 1653 | |
| 1654 | /* LED scheme. */ |
| 1655 | if (ha->flags.enable_led_scheme) |
| 1656 | ha->fw_options[2] |= BIT_12; |
| 1657 | |
| 1658 | /* Detect ISP6312. */ |
| 1659 | if (IS_QLA6312(ha)) |
| 1660 | ha->fw_options[2] |= BIT_13; |
| 1661 | |
| 1662 | /* Update firmware options. */ |
| 1663 | qla2x00_set_fw_options(vha, ha->fw_options); |
| 1664 | } |
| 1665 | |
| 1666 | void |
| 1667 | qla24xx_update_fw_options(scsi_qla_host_t *vha) |
| 1668 | { |
| 1669 | int rval; |
| 1670 | struct qla_hw_data *ha = vha->hw; |
| 1671 | |
| 1672 | if (IS_QLA82XX(ha)) |
| 1673 | return; |
| 1674 | |
| 1675 | /* Update Serial Link options. */ |
| 1676 | if ((le16_to_cpu(ha->fw_seriallink_options24[0]) & BIT_0) == 0) |
| 1677 | return; |
| 1678 | |
| 1679 | rval = qla2x00_set_serdes_params(vha, |
| 1680 | le16_to_cpu(ha->fw_seriallink_options24[1]), |
| 1681 | le16_to_cpu(ha->fw_seriallink_options24[2]), |
| 1682 | le16_to_cpu(ha->fw_seriallink_options24[3])); |
| 1683 | if (rval != QLA_SUCCESS) { |
| 1684 | ql_log(ql_log_warn, vha, 0x0104, |
| 1685 | "Unable to update Serial Link options (%x).\n", rval); |
| 1686 | } |
| 1687 | } |
| 1688 | |
| 1689 | void |
| 1690 | qla2x00_config_rings(struct scsi_qla_host *vha) |
| 1691 | { |
| 1692 | struct qla_hw_data *ha = vha->hw; |
| 1693 | struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| 1694 | struct req_que *req = ha->req_q_map[0]; |
| 1695 | struct rsp_que *rsp = ha->rsp_q_map[0]; |
| 1696 | |
| 1697 | /* Setup ring parameters in initialization control block. */ |
| 1698 | ha->init_cb->request_q_outpointer = __constant_cpu_to_le16(0); |
| 1699 | ha->init_cb->response_q_inpointer = __constant_cpu_to_le16(0); |
| 1700 | ha->init_cb->request_q_length = cpu_to_le16(req->length); |
| 1701 | ha->init_cb->response_q_length = cpu_to_le16(rsp->length); |
| 1702 | ha->init_cb->request_q_address[0] = cpu_to_le32(LSD(req->dma)); |
| 1703 | ha->init_cb->request_q_address[1] = cpu_to_le32(MSD(req->dma)); |
| 1704 | ha->init_cb->response_q_address[0] = cpu_to_le32(LSD(rsp->dma)); |
| 1705 | ha->init_cb->response_q_address[1] = cpu_to_le32(MSD(rsp->dma)); |
| 1706 | |
| 1707 | WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), 0); |
| 1708 | WRT_REG_WORD(ISP_REQ_Q_OUT(ha, reg), 0); |
| 1709 | WRT_REG_WORD(ISP_RSP_Q_IN(ha, reg), 0); |
| 1710 | WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), 0); |
| 1711 | RD_REG_WORD(ISP_RSP_Q_OUT(ha, reg)); /* PCI Posting. */ |
| 1712 | } |
| 1713 | |
| 1714 | void |
| 1715 | qla24xx_config_rings(struct scsi_qla_host *vha) |
| 1716 | { |
| 1717 | struct qla_hw_data *ha = vha->hw; |
| 1718 | device_reg_t __iomem *reg = ISP_QUE_REG(ha, 0); |
| 1719 | struct device_reg_2xxx __iomem *ioreg = &ha->iobase->isp; |
| 1720 | struct qla_msix_entry *msix; |
| 1721 | struct init_cb_24xx *icb; |
| 1722 | uint16_t rid = 0; |
| 1723 | struct req_que *req = ha->req_q_map[0]; |
| 1724 | struct rsp_que *rsp = ha->rsp_q_map[0]; |
| 1725 | |
| 1726 | /* Setup ring parameters in initialization control block. */ |
| 1727 | icb = (struct init_cb_24xx *)ha->init_cb; |
| 1728 | icb->request_q_outpointer = __constant_cpu_to_le16(0); |
| 1729 | icb->response_q_inpointer = __constant_cpu_to_le16(0); |
| 1730 | icb->request_q_length = cpu_to_le16(req->length); |
| 1731 | icb->response_q_length = cpu_to_le16(rsp->length); |
| 1732 | icb->request_q_address[0] = cpu_to_le32(LSD(req->dma)); |
| 1733 | icb->request_q_address[1] = cpu_to_le32(MSD(req->dma)); |
| 1734 | icb->response_q_address[0] = cpu_to_le32(LSD(rsp->dma)); |
| 1735 | icb->response_q_address[1] = cpu_to_le32(MSD(rsp->dma)); |
| 1736 | |
| 1737 | if (ha->mqenable) { |
| 1738 | icb->qos = __constant_cpu_to_le16(QLA_DEFAULT_QUE_QOS); |
| 1739 | icb->rid = __constant_cpu_to_le16(rid); |
| 1740 | if (ha->flags.msix_enabled) { |
| 1741 | msix = &ha->msix_entries[1]; |
| 1742 | ql_dbg(ql_dbg_init, vha, 0x00fd, |
| 1743 | "Registering vector 0x%x for base que.\n", |
| 1744 | msix->entry); |
| 1745 | icb->msix = cpu_to_le16(msix->entry); |
| 1746 | } |
| 1747 | /* Use alternate PCI bus number */ |
| 1748 | if (MSB(rid)) |
| 1749 | icb->firmware_options_2 |= |
| 1750 | __constant_cpu_to_le32(BIT_19); |
| 1751 | /* Use alternate PCI devfn */ |
| 1752 | if (LSB(rid)) |
| 1753 | icb->firmware_options_2 |= |
| 1754 | __constant_cpu_to_le32(BIT_18); |
| 1755 | |
| 1756 | /* Use Disable MSIX Handshake mode for capable adapters */ |
| 1757 | if (IS_MSIX_NACK_CAPABLE(ha)) { |
| 1758 | icb->firmware_options_2 &= |
| 1759 | __constant_cpu_to_le32(~BIT_22); |
| 1760 | ha->flags.disable_msix_handshake = 1; |
| 1761 | ql_dbg(ql_dbg_init, vha, 0x00fe, |
| 1762 | "MSIX Handshake Disable Mode turned on.\n"); |
| 1763 | } else { |
| 1764 | icb->firmware_options_2 |= |
| 1765 | __constant_cpu_to_le32(BIT_22); |
| 1766 | } |
| 1767 | icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_23); |
| 1768 | |
| 1769 | WRT_REG_DWORD(®->isp25mq.req_q_in, 0); |
| 1770 | WRT_REG_DWORD(®->isp25mq.req_q_out, 0); |
| 1771 | WRT_REG_DWORD(®->isp25mq.rsp_q_in, 0); |
| 1772 | WRT_REG_DWORD(®->isp25mq.rsp_q_out, 0); |
| 1773 | } else { |
| 1774 | WRT_REG_DWORD(®->isp24.req_q_in, 0); |
| 1775 | WRT_REG_DWORD(®->isp24.req_q_out, 0); |
| 1776 | WRT_REG_DWORD(®->isp24.rsp_q_in, 0); |
| 1777 | WRT_REG_DWORD(®->isp24.rsp_q_out, 0); |
| 1778 | } |
| 1779 | /* PCI posting */ |
| 1780 | RD_REG_DWORD(&ioreg->hccr); |
| 1781 | } |
| 1782 | |
| 1783 | /** |
| 1784 | * qla2x00_init_rings() - Initializes firmware. |
| 1785 | * @ha: HA context |
| 1786 | * |
| 1787 | * Beginning of request ring has initialization control block already built |
| 1788 | * by nvram config routine. |
| 1789 | * |
| 1790 | * Returns 0 on success. |
| 1791 | */ |
| 1792 | static int |
| 1793 | qla2x00_init_rings(scsi_qla_host_t *vha) |
| 1794 | { |
| 1795 | int rval; |
| 1796 | unsigned long flags = 0; |
| 1797 | int cnt, que; |
| 1798 | struct qla_hw_data *ha = vha->hw; |
| 1799 | struct req_que *req; |
| 1800 | struct rsp_que *rsp; |
| 1801 | struct scsi_qla_host *vp; |
| 1802 | struct mid_init_cb_24xx *mid_init_cb = |
| 1803 | (struct mid_init_cb_24xx *) ha->init_cb; |
| 1804 | |
| 1805 | spin_lock_irqsave(&ha->hardware_lock, flags); |
| 1806 | |
| 1807 | /* Clear outstanding commands array. */ |
| 1808 | for (que = 0; que < ha->max_req_queues; que++) { |
| 1809 | req = ha->req_q_map[que]; |
| 1810 | if (!req) |
| 1811 | continue; |
| 1812 | for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) |
| 1813 | req->outstanding_cmds[cnt] = NULL; |
| 1814 | |
| 1815 | req->current_outstanding_cmd = 1; |
| 1816 | |
| 1817 | /* Initialize firmware. */ |
| 1818 | req->ring_ptr = req->ring; |
| 1819 | req->ring_index = 0; |
| 1820 | req->cnt = req->length; |
| 1821 | } |
| 1822 | |
| 1823 | for (que = 0; que < ha->max_rsp_queues; que++) { |
| 1824 | rsp = ha->rsp_q_map[que]; |
| 1825 | if (!rsp) |
| 1826 | continue; |
| 1827 | /* Initialize response queue entries */ |
| 1828 | qla2x00_init_response_q_entries(rsp); |
| 1829 | } |
| 1830 | |
| 1831 | spin_lock(&ha->vport_slock); |
| 1832 | /* Clear RSCN queue. */ |
| 1833 | list_for_each_entry(vp, &ha->vp_list, list) { |
| 1834 | vp->rscn_in_ptr = 0; |
| 1835 | vp->rscn_out_ptr = 0; |
| 1836 | } |
| 1837 | |
| 1838 | spin_unlock(&ha->vport_slock); |
| 1839 | |
| 1840 | ha->isp_ops->config_rings(vha); |
| 1841 | |
| 1842 | spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| 1843 | |
| 1844 | /* Update any ISP specific firmware options before initialization. */ |
| 1845 | ha->isp_ops->update_fw_options(vha); |
| 1846 | |
| 1847 | ql_dbg(ql_dbg_init, vha, 0x00d1, "Issue init firmware.\n"); |
| 1848 | |
| 1849 | if (ha->flags.npiv_supported) { |
| 1850 | if (ha->operating_mode == LOOP) |
| 1851 | ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1; |
| 1852 | mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports); |
| 1853 | } |
| 1854 | |
| 1855 | if (IS_FWI2_CAPABLE(ha)) { |
| 1856 | mid_init_cb->options = __constant_cpu_to_le16(BIT_1); |
| 1857 | mid_init_cb->init_cb.execution_throttle = |
| 1858 | cpu_to_le16(ha->fw_xcb_count); |
| 1859 | } |
| 1860 | |
| 1861 | rval = qla2x00_init_firmware(vha, ha->init_cb_size); |
| 1862 | if (rval) { |
| 1863 | ql_log(ql_log_fatal, vha, 0x00d2, |
| 1864 | "Init Firmware **** FAILED ****.\n"); |
| 1865 | } else { |
| 1866 | ql_dbg(ql_dbg_init, vha, 0x00d3, |
| 1867 | "Init Firmware -- success.\n"); |
| 1868 | } |
| 1869 | |
| 1870 | return (rval); |
| 1871 | } |
| 1872 | |
| 1873 | /** |
| 1874 | * qla2x00_fw_ready() - Waits for firmware ready. |
| 1875 | * @ha: HA context |
| 1876 | * |
| 1877 | * Returns 0 on success. |
| 1878 | */ |
| 1879 | static int |
| 1880 | qla2x00_fw_ready(scsi_qla_host_t *vha) |
| 1881 | { |
| 1882 | int rval; |
| 1883 | unsigned long wtime, mtime, cs84xx_time; |
| 1884 | uint16_t min_wait; /* Minimum wait time if loop is down */ |
| 1885 | uint16_t wait_time; /* Wait time if loop is coming ready */ |
| 1886 | uint16_t state[5]; |
| 1887 | struct qla_hw_data *ha = vha->hw; |
| 1888 | |
| 1889 | rval = QLA_SUCCESS; |
| 1890 | |
| 1891 | /* 20 seconds for loop down. */ |
| 1892 | min_wait = 20; |
| 1893 | |
| 1894 | /* |
| 1895 | * Firmware should take at most one RATOV to login, plus 5 seconds for |
| 1896 | * our own processing. |
| 1897 | */ |
| 1898 | if ((wait_time = (ha->retry_count*ha->login_timeout) + 5) < min_wait) { |
| 1899 | wait_time = min_wait; |
| 1900 | } |
| 1901 | |
| 1902 | /* Min wait time if loop down */ |
| 1903 | mtime = jiffies + (min_wait * HZ); |
| 1904 | |
| 1905 | /* wait time before firmware ready */ |
| 1906 | wtime = jiffies + (wait_time * HZ); |
| 1907 | |
| 1908 | /* Wait for ISP to finish LIP */ |
| 1909 | if (!vha->flags.init_done) |
| 1910 | ql_log(ql_log_info, vha, 0x801e, |
| 1911 | "Waiting for LIP to complete.\n"); |
| 1912 | |
| 1913 | do { |
| 1914 | rval = qla2x00_get_firmware_state(vha, state); |
| 1915 | if (rval == QLA_SUCCESS) { |
| 1916 | if (state[0] < FSTATE_LOSS_OF_SYNC) { |
| 1917 | vha->device_flags &= ~DFLG_NO_CABLE; |
| 1918 | } |
| 1919 | if (IS_QLA84XX(ha) && state[0] != FSTATE_READY) { |
| 1920 | ql_dbg(ql_dbg_taskm, vha, 0x801f, |
| 1921 | "fw_state=%x 84xx=%x.\n", state[0], |
| 1922 | state[2]); |
| 1923 | if ((state[2] & FSTATE_LOGGED_IN) && |
| 1924 | (state[2] & FSTATE_WAITING_FOR_VERIFY)) { |
| 1925 | ql_dbg(ql_dbg_taskm, vha, 0x8028, |
| 1926 | "Sending verify iocb.\n"); |
| 1927 | |
| 1928 | cs84xx_time = jiffies; |
| 1929 | rval = qla84xx_init_chip(vha); |
| 1930 | if (rval != QLA_SUCCESS) { |
| 1931 | ql_log(ql_log_warn, |
| 1932 | vha, 0x8026, |
| 1933 | "Init chip failed.\n"); |
| 1934 | break; |
| 1935 | } |
| 1936 | |
| 1937 | /* Add time taken to initialize. */ |
| 1938 | cs84xx_time = jiffies - cs84xx_time; |
| 1939 | wtime += cs84xx_time; |
| 1940 | mtime += cs84xx_time; |
| 1941 | ql_dbg(ql_dbg_taskm, vha, 0x8025, |
| 1942 | "Increasing wait time by %ld. " |
| 1943 | "New time %ld.\n", cs84xx_time, |
| 1944 | wtime); |
| 1945 | } |
| 1946 | } else if (state[0] == FSTATE_READY) { |
| 1947 | ql_dbg(ql_dbg_taskm, vha, 0x8037, |
| 1948 | "F/W Ready - OK.\n"); |
| 1949 | |
| 1950 | qla2x00_get_retry_cnt(vha, &ha->retry_count, |
| 1951 | &ha->login_timeout, &ha->r_a_tov); |
| 1952 | |
| 1953 | rval = QLA_SUCCESS; |
| 1954 | break; |
| 1955 | } |
| 1956 | |
| 1957 | rval = QLA_FUNCTION_FAILED; |
| 1958 | |
| 1959 | if (atomic_read(&vha->loop_down_timer) && |
| 1960 | state[0] != FSTATE_READY) { |
| 1961 | /* Loop down. Timeout on min_wait for states |
| 1962 | * other than Wait for Login. |
| 1963 | */ |
| 1964 | if (time_after_eq(jiffies, mtime)) { |
| 1965 | ql_log(ql_log_info, vha, 0x8038, |
| 1966 | "Cable is unplugged...\n"); |
| 1967 | |
| 1968 | vha->device_flags |= DFLG_NO_CABLE; |
| 1969 | break; |
| 1970 | } |
| 1971 | } |
| 1972 | } else { |
| 1973 | /* Mailbox cmd failed. Timeout on min_wait. */ |
| 1974 | if (time_after_eq(jiffies, mtime) || |
| 1975 | ha->flags.isp82xx_fw_hung) |
| 1976 | break; |
| 1977 | } |
| 1978 | |
| 1979 | if (time_after_eq(jiffies, wtime)) |
| 1980 | break; |
| 1981 | |
| 1982 | /* Delay for a while */ |
| 1983 | msleep(500); |
| 1984 | |
| 1985 | ql_dbg(ql_dbg_taskm, vha, 0x8039, |
| 1986 | "fw_state=%x curr time=%lx.\n", state[0], jiffies); |
| 1987 | } while (1); |
| 1988 | |
| 1989 | ql_dbg(ql_dbg_taskm, vha, 0x803a, |
| 1990 | "fw_state=%x (%x, %x, %x, %x) " "curr time=%lx.\n", state[0], |
| 1991 | state[1], state[2], state[3], state[4], jiffies); |
| 1992 | |
| 1993 | if (rval) { |
| 1994 | ql_log(ql_log_warn, vha, 0x803b, |
| 1995 | "Firmware ready **** FAILED ****.\n"); |
| 1996 | } |
| 1997 | |
| 1998 | return (rval); |
| 1999 | } |
| 2000 | |
| 2001 | /* |
| 2002 | * qla2x00_configure_hba |
| 2003 | * Setup adapter context. |
| 2004 | * |
| 2005 | * Input: |
| 2006 | * ha = adapter state pointer. |
| 2007 | * |
| 2008 | * Returns: |
| 2009 | * 0 = success |
| 2010 | * |
| 2011 | * Context: |
| 2012 | * Kernel context. |
| 2013 | */ |
| 2014 | static int |
| 2015 | qla2x00_configure_hba(scsi_qla_host_t *vha) |
| 2016 | { |
| 2017 | int rval; |
| 2018 | uint16_t loop_id; |
| 2019 | uint16_t topo; |
| 2020 | uint16_t sw_cap; |
| 2021 | uint8_t al_pa; |
| 2022 | uint8_t area; |
| 2023 | uint8_t domain; |
| 2024 | char connect_type[22]; |
| 2025 | struct qla_hw_data *ha = vha->hw; |
| 2026 | |
| 2027 | /* Get host addresses. */ |
| 2028 | rval = qla2x00_get_adapter_id(vha, |
| 2029 | &loop_id, &al_pa, &area, &domain, &topo, &sw_cap); |
| 2030 | if (rval != QLA_SUCCESS) { |
| 2031 | if (LOOP_TRANSITION(vha) || atomic_read(&ha->loop_down_timer) || |
| 2032 | IS_QLA8XXX_TYPE(ha) || |
| 2033 | (rval == QLA_COMMAND_ERROR && loop_id == 0x7)) { |
| 2034 | ql_dbg(ql_dbg_disc, vha, 0x2008, |
| 2035 | "Loop is in a transition state.\n"); |
| 2036 | } else { |
| 2037 | ql_log(ql_log_warn, vha, 0x2009, |
| 2038 | "Unable to get host loop ID.\n"); |
| 2039 | set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); |
| 2040 | } |
| 2041 | return (rval); |
| 2042 | } |
| 2043 | |
| 2044 | if (topo == 4) { |
| 2045 | ql_log(ql_log_info, vha, 0x200a, |
| 2046 | "Cannot get topology - retrying.\n"); |
| 2047 | return (QLA_FUNCTION_FAILED); |
| 2048 | } |
| 2049 | |
| 2050 | vha->loop_id = loop_id; |
| 2051 | |
| 2052 | /* initialize */ |
| 2053 | ha->min_external_loopid = SNS_FIRST_LOOP_ID; |
| 2054 | ha->operating_mode = LOOP; |
| 2055 | ha->switch_cap = 0; |
| 2056 | |
| 2057 | switch (topo) { |
| 2058 | case 0: |
| 2059 | ql_dbg(ql_dbg_disc, vha, 0x200b, "HBA in NL topology.\n"); |
| 2060 | ha->current_topology = ISP_CFG_NL; |
| 2061 | strcpy(connect_type, "(Loop)"); |
| 2062 | break; |
| 2063 | |
| 2064 | case 1: |
| 2065 | ql_dbg(ql_dbg_disc, vha, 0x200c, "HBA in FL topology.\n"); |
| 2066 | ha->switch_cap = sw_cap; |
| 2067 | ha->current_topology = ISP_CFG_FL; |
| 2068 | strcpy(connect_type, "(FL_Port)"); |
| 2069 | break; |
| 2070 | |
| 2071 | case 2: |
| 2072 | ql_dbg(ql_dbg_disc, vha, 0x200d, "HBA in N P2P topology.\n"); |
| 2073 | ha->operating_mode = P2P; |
| 2074 | ha->current_topology = ISP_CFG_N; |
| 2075 | strcpy(connect_type, "(N_Port-to-N_Port)"); |
| 2076 | break; |
| 2077 | |
| 2078 | case 3: |
| 2079 | ql_dbg(ql_dbg_disc, vha, 0x200e, "HBA in F P2P topology.\n"); |
| 2080 | ha->switch_cap = sw_cap; |
| 2081 | ha->operating_mode = P2P; |
| 2082 | ha->current_topology = ISP_CFG_F; |
| 2083 | strcpy(connect_type, "(F_Port)"); |
| 2084 | break; |
| 2085 | |
| 2086 | default: |
| 2087 | ql_dbg(ql_dbg_disc, vha, 0x200f, |
| 2088 | "HBA in unknown topology %x, using NL.\n", topo); |
| 2089 | ha->current_topology = ISP_CFG_NL; |
| 2090 | strcpy(connect_type, "(Loop)"); |
| 2091 | break; |
| 2092 | } |
| 2093 | |
| 2094 | /* Save Host port and loop ID. */ |
| 2095 | /* byte order - Big Endian */ |
| 2096 | vha->d_id.b.domain = domain; |
| 2097 | vha->d_id.b.area = area; |
| 2098 | vha->d_id.b.al_pa = al_pa; |
| 2099 | |
| 2100 | if (!vha->flags.init_done) |
| 2101 | ql_log(ql_log_info, vha, 0x2010, |
| 2102 | "Topology - %s, Host Loop address 0x%x.\n", |
| 2103 | connect_type, vha->loop_id); |
| 2104 | |
| 2105 | if (rval) { |
| 2106 | ql_log(ql_log_warn, vha, 0x2011, |
| 2107 | "%s FAILED\n", __func__); |
| 2108 | } else { |
| 2109 | ql_dbg(ql_dbg_disc, vha, 0x2012, |
| 2110 | "%s success\n", __func__); |
| 2111 | } |
| 2112 | |
| 2113 | return(rval); |
| 2114 | } |
| 2115 | |
| 2116 | inline void |
| 2117 | qla2x00_set_model_info(scsi_qla_host_t *vha, uint8_t *model, size_t len, |
| 2118 | char *def) |
| 2119 | { |
| 2120 | char *st, *en; |
| 2121 | uint16_t index; |
| 2122 | struct qla_hw_data *ha = vha->hw; |
| 2123 | int use_tbl = !IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && |
| 2124 | !IS_QLA8XXX_TYPE(ha); |
| 2125 | |
| 2126 | if (memcmp(model, BINZERO, len) != 0) { |
| 2127 | strncpy(ha->model_number, model, len); |
| 2128 | st = en = ha->model_number; |
| 2129 | en += len - 1; |
| 2130 | while (en > st) { |
| 2131 | if (*en != 0x20 && *en != 0x00) |
| 2132 | break; |
| 2133 | *en-- = '\0'; |
| 2134 | } |
| 2135 | |
| 2136 | index = (ha->pdev->subsystem_device & 0xff); |
| 2137 | if (use_tbl && |
| 2138 | ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC && |
| 2139 | index < QLA_MODEL_NAMES) |
| 2140 | strncpy(ha->model_desc, |
| 2141 | qla2x00_model_name[index * 2 + 1], |
| 2142 | sizeof(ha->model_desc) - 1); |
| 2143 | } else { |
| 2144 | index = (ha->pdev->subsystem_device & 0xff); |
| 2145 | if (use_tbl && |
| 2146 | ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC && |
| 2147 | index < QLA_MODEL_NAMES) { |
| 2148 | strcpy(ha->model_number, |
| 2149 | qla2x00_model_name[index * 2]); |
| 2150 | strncpy(ha->model_desc, |
| 2151 | qla2x00_model_name[index * 2 + 1], |
| 2152 | sizeof(ha->model_desc) - 1); |
| 2153 | } else { |
| 2154 | strcpy(ha->model_number, def); |
| 2155 | } |
| 2156 | } |
| 2157 | if (IS_FWI2_CAPABLE(ha)) |
| 2158 | qla2xxx_get_vpd_field(vha, "\x82", ha->model_desc, |
| 2159 | sizeof(ha->model_desc)); |
| 2160 | } |
| 2161 | |
| 2162 | /* On sparc systems, obtain port and node WWN from firmware |
| 2163 | * properties. |
| 2164 | */ |
| 2165 | static void qla2xxx_nvram_wwn_from_ofw(scsi_qla_host_t *vha, nvram_t *nv) |
| 2166 | { |
| 2167 | #ifdef CONFIG_SPARC |
| 2168 | struct qla_hw_data *ha = vha->hw; |
| 2169 | struct pci_dev *pdev = ha->pdev; |
| 2170 | struct device_node *dp = pci_device_to_OF_node(pdev); |
| 2171 | const u8 *val; |
| 2172 | int len; |
| 2173 | |
| 2174 | val = of_get_property(dp, "port-wwn", &len); |
| 2175 | if (val && len >= WWN_SIZE) |
| 2176 | memcpy(nv->port_name, val, WWN_SIZE); |
| 2177 | |
| 2178 | val = of_get_property(dp, "node-wwn", &len); |
| 2179 | if (val && len >= WWN_SIZE) |
| 2180 | memcpy(nv->node_name, val, WWN_SIZE); |
| 2181 | #endif |
| 2182 | } |
| 2183 | |
| 2184 | /* |
| 2185 | * NVRAM configuration for ISP 2xxx |
| 2186 | * |
| 2187 | * Input: |
| 2188 | * ha = adapter block pointer. |
| 2189 | * |
| 2190 | * Output: |
| 2191 | * initialization control block in response_ring |
| 2192 | * host adapters parameters in host adapter block |
| 2193 | * |
| 2194 | * Returns: |
| 2195 | * 0 = success. |
| 2196 | */ |
| 2197 | int |
| 2198 | qla2x00_nvram_config(scsi_qla_host_t *vha) |
| 2199 | { |
| 2200 | int rval; |
| 2201 | uint8_t chksum = 0; |
| 2202 | uint16_t cnt; |
| 2203 | uint8_t *dptr1, *dptr2; |
| 2204 | struct qla_hw_data *ha = vha->hw; |
| 2205 | init_cb_t *icb = ha->init_cb; |
| 2206 | nvram_t *nv = ha->nvram; |
| 2207 | uint8_t *ptr = ha->nvram; |
| 2208 | struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| 2209 | |
| 2210 | rval = QLA_SUCCESS; |
| 2211 | |
| 2212 | /* Determine NVRAM starting address. */ |
| 2213 | ha->nvram_size = sizeof(nvram_t); |
| 2214 | ha->nvram_base = 0; |
| 2215 | if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) |
| 2216 | if ((RD_REG_WORD(®->ctrl_status) >> 14) == 1) |
| 2217 | ha->nvram_base = 0x80; |
| 2218 | |
| 2219 | /* Get NVRAM data and calculate checksum. */ |
| 2220 | ha->isp_ops->read_nvram(vha, ptr, ha->nvram_base, ha->nvram_size); |
| 2221 | for (cnt = 0, chksum = 0; cnt < ha->nvram_size; cnt++) |
| 2222 | chksum += *ptr++; |
| 2223 | |
| 2224 | ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x010f, |
| 2225 | "Contents of NVRAM.\n"); |
| 2226 | ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0110, |
| 2227 | (uint8_t *)nv, ha->nvram_size); |
| 2228 | |
| 2229 | /* Bad NVRAM data, set defaults parameters. */ |
| 2230 | if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || |
| 2231 | nv->id[2] != 'P' || nv->id[3] != ' ' || nv->nvram_version < 1) { |
| 2232 | /* Reset NVRAM data. */ |
| 2233 | ql_log(ql_log_warn, vha, 0x0064, |
| 2234 | "Inconisistent NVRAM " |
| 2235 | "detected: checksum=0x%x id=%c version=0x%x.\n", |
| 2236 | chksum, nv->id[0], nv->nvram_version); |
| 2237 | ql_log(ql_log_warn, vha, 0x0065, |
| 2238 | "Falling back to " |
| 2239 | "functioning (yet invalid -- WWPN) defaults.\n"); |
| 2240 | |
| 2241 | /* |
| 2242 | * Set default initialization control block. |
| 2243 | */ |
| 2244 | memset(nv, 0, ha->nvram_size); |
| 2245 | nv->parameter_block_version = ICB_VERSION; |
| 2246 | |
| 2247 | if (IS_QLA23XX(ha)) { |
| 2248 | nv->firmware_options[0] = BIT_2 | BIT_1; |
| 2249 | nv->firmware_options[1] = BIT_7 | BIT_5; |
| 2250 | nv->add_firmware_options[0] = BIT_5; |
| 2251 | nv->add_firmware_options[1] = BIT_5 | BIT_4; |
| 2252 | nv->frame_payload_size = __constant_cpu_to_le16(2048); |
| 2253 | nv->special_options[1] = BIT_7; |
| 2254 | } else if (IS_QLA2200(ha)) { |
| 2255 | nv->firmware_options[0] = BIT_2 | BIT_1; |
| 2256 | nv->firmware_options[1] = BIT_7 | BIT_5; |
| 2257 | nv->add_firmware_options[0] = BIT_5; |
| 2258 | nv->add_firmware_options[1] = BIT_5 | BIT_4; |
| 2259 | nv->frame_payload_size = __constant_cpu_to_le16(1024); |
| 2260 | } else if (IS_QLA2100(ha)) { |
| 2261 | nv->firmware_options[0] = BIT_3 | BIT_1; |
| 2262 | nv->firmware_options[1] = BIT_5; |
| 2263 | nv->frame_payload_size = __constant_cpu_to_le16(1024); |
| 2264 | } |
| 2265 | |
| 2266 | nv->max_iocb_allocation = __constant_cpu_to_le16(256); |
| 2267 | nv->execution_throttle = __constant_cpu_to_le16(16); |
| 2268 | nv->retry_count = 8; |
| 2269 | nv->retry_delay = 1; |
| 2270 | |
| 2271 | nv->port_name[0] = 33; |
| 2272 | nv->port_name[3] = 224; |
| 2273 | nv->port_name[4] = 139; |
| 2274 | |
| 2275 | qla2xxx_nvram_wwn_from_ofw(vha, nv); |
| 2276 | |
| 2277 | nv->login_timeout = 4; |
| 2278 | |
| 2279 | /* |
| 2280 | * Set default host adapter parameters |
| 2281 | */ |
| 2282 | nv->host_p[1] = BIT_2; |
| 2283 | nv->reset_delay = 5; |
| 2284 | nv->port_down_retry_count = 8; |
| 2285 | nv->max_luns_per_target = __constant_cpu_to_le16(8); |
| 2286 | nv->link_down_timeout = 60; |
| 2287 | |
| 2288 | rval = 1; |
| 2289 | } |
| 2290 | |
| 2291 | #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) |
| 2292 | /* |
| 2293 | * The SN2 does not provide BIOS emulation which means you can't change |
| 2294 | * potentially bogus BIOS settings. Force the use of default settings |
| 2295 | * for link rate and frame size. Hope that the rest of the settings |
| 2296 | * are valid. |
| 2297 | */ |
| 2298 | if (ia64_platform_is("sn2")) { |
| 2299 | nv->frame_payload_size = __constant_cpu_to_le16(2048); |
| 2300 | if (IS_QLA23XX(ha)) |
| 2301 | nv->special_options[1] = BIT_7; |
| 2302 | } |
| 2303 | #endif |
| 2304 | |
| 2305 | /* Reset Initialization control block */ |
| 2306 | memset(icb, 0, ha->init_cb_size); |
| 2307 | |
| 2308 | /* |
| 2309 | * Setup driver NVRAM options. |
| 2310 | */ |
| 2311 | nv->firmware_options[0] |= (BIT_6 | BIT_1); |
| 2312 | nv->firmware_options[0] &= ~(BIT_5 | BIT_4); |
| 2313 | nv->firmware_options[1] |= (BIT_5 | BIT_0); |
| 2314 | nv->firmware_options[1] &= ~BIT_4; |
| 2315 | |
| 2316 | if (IS_QLA23XX(ha)) { |
| 2317 | nv->firmware_options[0] |= BIT_2; |
| 2318 | nv->firmware_options[0] &= ~BIT_3; |
| 2319 | nv->firmware_options[0] &= ~BIT_6; |
| 2320 | nv->add_firmware_options[1] |= BIT_5 | BIT_4; |
| 2321 | |
| 2322 | if (IS_QLA2300(ha)) { |
| 2323 | if (ha->fb_rev == FPM_2310) { |
| 2324 | strcpy(ha->model_number, "QLA2310"); |
| 2325 | } else { |
| 2326 | strcpy(ha->model_number, "QLA2300"); |
| 2327 | } |
| 2328 | } else { |
| 2329 | qla2x00_set_model_info(vha, nv->model_number, |
| 2330 | sizeof(nv->model_number), "QLA23xx"); |
| 2331 | } |
| 2332 | } else if (IS_QLA2200(ha)) { |
| 2333 | nv->firmware_options[0] |= BIT_2; |
| 2334 | /* |
| 2335 | * 'Point-to-point preferred, else loop' is not a safe |
| 2336 | * connection mode setting. |
| 2337 | */ |
| 2338 | if ((nv->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) == |
| 2339 | (BIT_5 | BIT_4)) { |
| 2340 | /* Force 'loop preferred, else point-to-point'. */ |
| 2341 | nv->add_firmware_options[0] &= ~(BIT_6 | BIT_5 | BIT_4); |
| 2342 | nv->add_firmware_options[0] |= BIT_5; |
| 2343 | } |
| 2344 | strcpy(ha->model_number, "QLA22xx"); |
| 2345 | } else /*if (IS_QLA2100(ha))*/ { |
| 2346 | strcpy(ha->model_number, "QLA2100"); |
| 2347 | } |
| 2348 | |
| 2349 | /* |
| 2350 | * Copy over NVRAM RISC parameter block to initialization control block. |
| 2351 | */ |
| 2352 | dptr1 = (uint8_t *)icb; |
| 2353 | dptr2 = (uint8_t *)&nv->parameter_block_version; |
| 2354 | cnt = (uint8_t *)&icb->request_q_outpointer - (uint8_t *)&icb->version; |
| 2355 | while (cnt--) |
| 2356 | *dptr1++ = *dptr2++; |
| 2357 | |
| 2358 | /* Copy 2nd half. */ |
| 2359 | dptr1 = (uint8_t *)icb->add_firmware_options; |
| 2360 | cnt = (uint8_t *)icb->reserved_3 - (uint8_t *)icb->add_firmware_options; |
| 2361 | while (cnt--) |
| 2362 | *dptr1++ = *dptr2++; |
| 2363 | |
| 2364 | /* Use alternate WWN? */ |
| 2365 | if (nv->host_p[1] & BIT_7) { |
| 2366 | memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE); |
| 2367 | memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE); |
| 2368 | } |
| 2369 | |
| 2370 | /* Prepare nodename */ |
| 2371 | if ((icb->firmware_options[1] & BIT_6) == 0) { |
| 2372 | /* |
| 2373 | * Firmware will apply the following mask if the nodename was |
| 2374 | * not provided. |
| 2375 | */ |
| 2376 | memcpy(icb->node_name, icb->port_name, WWN_SIZE); |
| 2377 | icb->node_name[0] &= 0xF0; |
| 2378 | } |
| 2379 | |
| 2380 | /* |
| 2381 | * Set host adapter parameters. |
| 2382 | */ |
| 2383 | |
| 2384 | /* |
| 2385 | * BIT_7 in the host-parameters section allows for modification to |
| 2386 | * internal driver logging. |
| 2387 | */ |
| 2388 | if (nv->host_p[0] & BIT_7) |
| 2389 | ql2xextended_error_logging = 0x7fffffff; |
| 2390 | ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0); |
| 2391 | /* Always load RISC code on non ISP2[12]00 chips. */ |
| 2392 | if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) |
| 2393 | ha->flags.disable_risc_code_load = 0; |
| 2394 | ha->flags.enable_lip_reset = ((nv->host_p[1] & BIT_1) ? 1 : 0); |
| 2395 | ha->flags.enable_lip_full_login = ((nv->host_p[1] & BIT_2) ? 1 : 0); |
| 2396 | ha->flags.enable_target_reset = ((nv->host_p[1] & BIT_3) ? 1 : 0); |
| 2397 | ha->flags.enable_led_scheme = (nv->special_options[1] & BIT_4) ? 1 : 0; |
| 2398 | ha->flags.disable_serdes = 0; |
| 2399 | |
| 2400 | ha->operating_mode = |
| 2401 | (icb->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) >> 4; |
| 2402 | |
| 2403 | memcpy(ha->fw_seriallink_options, nv->seriallink_options, |
| 2404 | sizeof(ha->fw_seriallink_options)); |
| 2405 | |
| 2406 | /* save HBA serial number */ |
| 2407 | ha->serial0 = icb->port_name[5]; |
| 2408 | ha->serial1 = icb->port_name[6]; |
| 2409 | ha->serial2 = icb->port_name[7]; |
| 2410 | memcpy(vha->node_name, icb->node_name, WWN_SIZE); |
| 2411 | memcpy(vha->port_name, icb->port_name, WWN_SIZE); |
| 2412 | |
| 2413 | icb->execution_throttle = __constant_cpu_to_le16(0xFFFF); |
| 2414 | |
| 2415 | ha->retry_count = nv->retry_count; |
| 2416 | |
| 2417 | /* Set minimum login_timeout to 4 seconds. */ |
| 2418 | if (nv->login_timeout != ql2xlogintimeout) |
| 2419 | nv->login_timeout = ql2xlogintimeout; |
| 2420 | if (nv->login_timeout < 4) |
| 2421 | nv->login_timeout = 4; |
| 2422 | ha->login_timeout = nv->login_timeout; |
| 2423 | icb->login_timeout = nv->login_timeout; |
| 2424 | |
| 2425 | /* Set minimum RATOV to 100 tenths of a second. */ |
| 2426 | ha->r_a_tov = 100; |
| 2427 | |
| 2428 | ha->loop_reset_delay = nv->reset_delay; |
| 2429 | |
| 2430 | /* Link Down Timeout = 0: |
| 2431 | * |
| 2432 | * When Port Down timer expires we will start returning |
| 2433 | * I/O's to OS with "DID_NO_CONNECT". |
| 2434 | * |
| 2435 | * Link Down Timeout != 0: |
| 2436 | * |
| 2437 | * The driver waits for the link to come up after link down |
| 2438 | * before returning I/Os to OS with "DID_NO_CONNECT". |
| 2439 | */ |
| 2440 | if (nv->link_down_timeout == 0) { |
| 2441 | ha->loop_down_abort_time = |
| 2442 | (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT); |
| 2443 | } else { |
| 2444 | ha->link_down_timeout = nv->link_down_timeout; |
| 2445 | ha->loop_down_abort_time = |
| 2446 | (LOOP_DOWN_TIME - ha->link_down_timeout); |
| 2447 | } |
| 2448 | |
| 2449 | /* |
| 2450 | * Need enough time to try and get the port back. |
| 2451 | */ |
| 2452 | ha->port_down_retry_count = nv->port_down_retry_count; |
| 2453 | if (qlport_down_retry) |
| 2454 | ha->port_down_retry_count = qlport_down_retry; |
| 2455 | /* Set login_retry_count */ |
| 2456 | ha->login_retry_count = nv->retry_count; |
| 2457 | if (ha->port_down_retry_count == nv->port_down_retry_count && |
| 2458 | ha->port_down_retry_count > 3) |
| 2459 | ha->login_retry_count = ha->port_down_retry_count; |
| 2460 | else if (ha->port_down_retry_count > (int)ha->login_retry_count) |
| 2461 | ha->login_retry_count = ha->port_down_retry_count; |
| 2462 | if (ql2xloginretrycount) |
| 2463 | ha->login_retry_count = ql2xloginretrycount; |
| 2464 | |
| 2465 | icb->lun_enables = __constant_cpu_to_le16(0); |
| 2466 | icb->command_resource_count = 0; |
| 2467 | icb->immediate_notify_resource_count = 0; |
| 2468 | icb->timeout = __constant_cpu_to_le16(0); |
| 2469 | |
| 2470 | if (IS_QLA2100(ha) || IS_QLA2200(ha)) { |
| 2471 | /* Enable RIO */ |
| 2472 | icb->firmware_options[0] &= ~BIT_3; |
| 2473 | icb->add_firmware_options[0] &= |
| 2474 | ~(BIT_3 | BIT_2 | BIT_1 | BIT_0); |
| 2475 | icb->add_firmware_options[0] |= BIT_2; |
| 2476 | icb->response_accumulation_timer = 3; |
| 2477 | icb->interrupt_delay_timer = 5; |
| 2478 | |
| 2479 | vha->flags.process_response_queue = 1; |
| 2480 | } else { |
| 2481 | /* Enable ZIO. */ |
| 2482 | if (!vha->flags.init_done) { |
| 2483 | ha->zio_mode = icb->add_firmware_options[0] & |
| 2484 | (BIT_3 | BIT_2 | BIT_1 | BIT_0); |
| 2485 | ha->zio_timer = icb->interrupt_delay_timer ? |
| 2486 | icb->interrupt_delay_timer: 2; |
| 2487 | } |
| 2488 | icb->add_firmware_options[0] &= |
| 2489 | ~(BIT_3 | BIT_2 | BIT_1 | BIT_0); |
| 2490 | vha->flags.process_response_queue = 0; |
| 2491 | if (ha->zio_mode != QLA_ZIO_DISABLED) { |
| 2492 | ha->zio_mode = QLA_ZIO_MODE_6; |
| 2493 | |
| 2494 | ql_log(ql_log_info, vha, 0x0068, |
| 2495 | "ZIO mode %d enabled; timer delay (%d us).\n", |
| 2496 | ha->zio_mode, ha->zio_timer * 100); |
| 2497 | |
| 2498 | icb->add_firmware_options[0] |= (uint8_t)ha->zio_mode; |
| 2499 | icb->interrupt_delay_timer = (uint8_t)ha->zio_timer; |
| 2500 | vha->flags.process_response_queue = 1; |
| 2501 | } |
| 2502 | } |
| 2503 | |
| 2504 | if (rval) { |
| 2505 | ql_log(ql_log_warn, vha, 0x0069, |
| 2506 | "NVRAM configuration failed.\n"); |
| 2507 | } |
| 2508 | return (rval); |
| 2509 | } |
| 2510 | |
| 2511 | static void |
| 2512 | qla2x00_rport_del(void *data) |
| 2513 | { |
| 2514 | fc_port_t *fcport = data; |
| 2515 | struct fc_rport *rport; |
| 2516 | unsigned long flags; |
| 2517 | |
| 2518 | spin_lock_irqsave(fcport->vha->host->host_lock, flags); |
| 2519 | rport = fcport->drport ? fcport->drport: fcport->rport; |
| 2520 | fcport->drport = NULL; |
| 2521 | spin_unlock_irqrestore(fcport->vha->host->host_lock, flags); |
| 2522 | if (rport) |
| 2523 | fc_remote_port_delete(rport); |
| 2524 | } |
| 2525 | |
| 2526 | /** |
| 2527 | * qla2x00_alloc_fcport() - Allocate a generic fcport. |
| 2528 | * @ha: HA context |
| 2529 | * @flags: allocation flags |
| 2530 | * |
| 2531 | * Returns a pointer to the allocated fcport, or NULL, if none available. |
| 2532 | */ |
| 2533 | fc_port_t * |
| 2534 | qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags) |
| 2535 | { |
| 2536 | fc_port_t *fcport; |
| 2537 | |
| 2538 | fcport = kzalloc(sizeof(fc_port_t), flags); |
| 2539 | if (!fcport) |
| 2540 | return NULL; |
| 2541 | |
| 2542 | /* Setup fcport template structure. */ |
| 2543 | fcport->vha = vha; |
| 2544 | fcport->vp_idx = vha->vp_idx; |
| 2545 | fcport->port_type = FCT_UNKNOWN; |
| 2546 | fcport->loop_id = FC_NO_LOOP_ID; |
| 2547 | qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED); |
| 2548 | fcport->supported_classes = FC_COS_UNSPECIFIED; |
| 2549 | |
| 2550 | return fcport; |
| 2551 | } |
| 2552 | |
| 2553 | /* |
| 2554 | * qla2x00_configure_loop |
| 2555 | * Updates Fibre Channel Device Database with what is actually on loop. |
| 2556 | * |
| 2557 | * Input: |
| 2558 | * ha = adapter block pointer. |
| 2559 | * |
| 2560 | * Returns: |
| 2561 | * 0 = success. |
| 2562 | * 1 = error. |
| 2563 | * 2 = database was full and device was not configured. |
| 2564 | */ |
| 2565 | static int |
| 2566 | qla2x00_configure_loop(scsi_qla_host_t *vha) |
| 2567 | { |
| 2568 | int rval; |
| 2569 | unsigned long flags, save_flags; |
| 2570 | struct qla_hw_data *ha = vha->hw; |
| 2571 | rval = QLA_SUCCESS; |
| 2572 | |
| 2573 | /* Get Initiator ID */ |
| 2574 | if (test_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags)) { |
| 2575 | rval = qla2x00_configure_hba(vha); |
| 2576 | if (rval != QLA_SUCCESS) { |
| 2577 | ql_dbg(ql_dbg_disc, vha, 0x2013, |
| 2578 | "Unable to configure HBA.\n"); |
| 2579 | return (rval); |
| 2580 | } |
| 2581 | } |
| 2582 | |
| 2583 | save_flags = flags = vha->dpc_flags; |
| 2584 | ql_dbg(ql_dbg_disc, vha, 0x2014, |
| 2585 | "Configure loop -- dpc flags = 0x%lx.\n", flags); |
| 2586 | |
| 2587 | /* |
| 2588 | * If we have both an RSCN and PORT UPDATE pending then handle them |
| 2589 | * both at the same time. |
| 2590 | */ |
| 2591 | clear_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); |
| 2592 | clear_bit(RSCN_UPDATE, &vha->dpc_flags); |
| 2593 | |
| 2594 | qla2x00_get_data_rate(vha); |
| 2595 | |
| 2596 | /* Determine what we need to do */ |
| 2597 | if (ha->current_topology == ISP_CFG_FL && |
| 2598 | (test_bit(LOCAL_LOOP_UPDATE, &flags))) { |
| 2599 | |
| 2600 | vha->flags.rscn_queue_overflow = 1; |
| 2601 | set_bit(RSCN_UPDATE, &flags); |
| 2602 | |
| 2603 | } else if (ha->current_topology == ISP_CFG_F && |
| 2604 | (test_bit(LOCAL_LOOP_UPDATE, &flags))) { |
| 2605 | |
| 2606 | vha->flags.rscn_queue_overflow = 1; |
| 2607 | set_bit(RSCN_UPDATE, &flags); |
| 2608 | clear_bit(LOCAL_LOOP_UPDATE, &flags); |
| 2609 | |
| 2610 | } else if (ha->current_topology == ISP_CFG_N) { |
| 2611 | clear_bit(RSCN_UPDATE, &flags); |
| 2612 | |
| 2613 | } else if (!vha->flags.online || |
| 2614 | (test_bit(ABORT_ISP_ACTIVE, &flags))) { |
| 2615 | |
| 2616 | vha->flags.rscn_queue_overflow = 1; |
| 2617 | set_bit(RSCN_UPDATE, &flags); |
| 2618 | set_bit(LOCAL_LOOP_UPDATE, &flags); |
| 2619 | } |
| 2620 | |
| 2621 | if (test_bit(LOCAL_LOOP_UPDATE, &flags)) { |
| 2622 | if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) { |
| 2623 | ql_dbg(ql_dbg_disc, vha, 0x2015, |
| 2624 | "Loop resync needed, failing.\n"); |
| 2625 | rval = QLA_FUNCTION_FAILED; |
| 2626 | } |
| 2627 | else |
| 2628 | rval = qla2x00_configure_local_loop(vha); |
| 2629 | } |
| 2630 | |
| 2631 | if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) { |
| 2632 | if (LOOP_TRANSITION(vha)) { |
| 2633 | ql_dbg(ql_dbg_disc, vha, 0x201e, |
| 2634 | "Needs RSCN update and loop transition.\n"); |
| 2635 | rval = QLA_FUNCTION_FAILED; |
| 2636 | } |
| 2637 | else |
| 2638 | rval = qla2x00_configure_fabric(vha); |
| 2639 | } |
| 2640 | |
| 2641 | if (rval == QLA_SUCCESS) { |
| 2642 | if (atomic_read(&vha->loop_down_timer) || |
| 2643 | test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) { |
| 2644 | rval = QLA_FUNCTION_FAILED; |
| 2645 | } else { |
| 2646 | atomic_set(&vha->loop_state, LOOP_READY); |
| 2647 | ql_dbg(ql_dbg_disc, vha, 0x2069, |
| 2648 | "LOOP READY.\n"); |
| 2649 | } |
| 2650 | } |
| 2651 | |
| 2652 | if (rval) { |
| 2653 | ql_dbg(ql_dbg_disc, vha, 0x206a, |
| 2654 | "%s *** FAILED ***.\n", __func__); |
| 2655 | } else { |
| 2656 | ql_dbg(ql_dbg_disc, vha, 0x206b, |
| 2657 | "%s: exiting normally.\n", __func__); |
| 2658 | } |
| 2659 | |
| 2660 | /* Restore state if a resync event occurred during processing */ |
| 2661 | if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) { |
| 2662 | if (test_bit(LOCAL_LOOP_UPDATE, &save_flags)) |
| 2663 | set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); |
| 2664 | if (test_bit(RSCN_UPDATE, &save_flags)) { |
| 2665 | set_bit(RSCN_UPDATE, &vha->dpc_flags); |
| 2666 | if (!IS_ALOGIO_CAPABLE(ha)) |
| 2667 | vha->flags.rscn_queue_overflow = 1; |
| 2668 | } |
| 2669 | } |
| 2670 | |
| 2671 | return (rval); |
| 2672 | } |
| 2673 | |
| 2674 | |
| 2675 | |
| 2676 | /* |
| 2677 | * qla2x00_configure_local_loop |
| 2678 | * Updates Fibre Channel Device Database with local loop devices. |
| 2679 | * |
| 2680 | * Input: |
| 2681 | * ha = adapter block pointer. |
| 2682 | * |
| 2683 | * Returns: |
| 2684 | * 0 = success. |
| 2685 | */ |
| 2686 | static int |
| 2687 | qla2x00_configure_local_loop(scsi_qla_host_t *vha) |
| 2688 | { |
| 2689 | int rval, rval2; |
| 2690 | int found_devs; |
| 2691 | int found; |
| 2692 | fc_port_t *fcport, *new_fcport; |
| 2693 | |
| 2694 | uint16_t index; |
| 2695 | uint16_t entries; |
| 2696 | char *id_iter; |
| 2697 | uint16_t loop_id; |
| 2698 | uint8_t domain, area, al_pa; |
| 2699 | struct qla_hw_data *ha = vha->hw; |
| 2700 | |
| 2701 | found_devs = 0; |
| 2702 | new_fcport = NULL; |
| 2703 | entries = MAX_FIBRE_DEVICES; |
| 2704 | |
| 2705 | ql_dbg(ql_dbg_disc, vha, 0x2016, |
| 2706 | "Getting FCAL position map.\n"); |
| 2707 | if (ql2xextended_error_logging & ql_dbg_disc) |
| 2708 | qla2x00_get_fcal_position_map(vha, NULL); |
| 2709 | |
| 2710 | /* Get list of logged in devices. */ |
| 2711 | memset(ha->gid_list, 0, GID_LIST_SIZE); |
| 2712 | rval = qla2x00_get_id_list(vha, ha->gid_list, ha->gid_list_dma, |
| 2713 | &entries); |
| 2714 | if (rval != QLA_SUCCESS) |
| 2715 | goto cleanup_allocation; |
| 2716 | |
| 2717 | ql_dbg(ql_dbg_disc, vha, 0x2017, |
| 2718 | "Entries in ID list (%d).\n", entries); |
| 2719 | ql_dump_buffer(ql_dbg_disc + ql_dbg_buffer, vha, 0x2075, |
| 2720 | (uint8_t *)ha->gid_list, |
| 2721 | entries * sizeof(struct gid_list_info)); |
| 2722 | |
| 2723 | /* Allocate temporary fcport for any new fcports discovered. */ |
| 2724 | new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL); |
| 2725 | if (new_fcport == NULL) { |
| 2726 | ql_log(ql_log_warn, vha, 0x2018, |
| 2727 | "Memory allocation failed for fcport.\n"); |
| 2728 | rval = QLA_MEMORY_ALLOC_FAILED; |
| 2729 | goto cleanup_allocation; |
| 2730 | } |
| 2731 | new_fcport->flags &= ~FCF_FABRIC_DEVICE; |
| 2732 | |
| 2733 | /* |
| 2734 | * Mark local devices that were present with FCF_DEVICE_LOST for now. |
| 2735 | */ |
| 2736 | list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| 2737 | if (atomic_read(&fcport->state) == FCS_ONLINE && |
| 2738 | fcport->port_type != FCT_BROADCAST && |
| 2739 | (fcport->flags & FCF_FABRIC_DEVICE) == 0) { |
| 2740 | |
| 2741 | ql_dbg(ql_dbg_disc, vha, 0x2019, |
| 2742 | "Marking port lost loop_id=0x%04x.\n", |
| 2743 | fcport->loop_id); |
| 2744 | |
| 2745 | qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST); |
| 2746 | } |
| 2747 | } |
| 2748 | |
| 2749 | /* Add devices to port list. */ |
| 2750 | id_iter = (char *)ha->gid_list; |
| 2751 | for (index = 0; index < entries; index++) { |
| 2752 | domain = ((struct gid_list_info *)id_iter)->domain; |
| 2753 | area = ((struct gid_list_info *)id_iter)->area; |
| 2754 | al_pa = ((struct gid_list_info *)id_iter)->al_pa; |
| 2755 | if (IS_QLA2100(ha) || IS_QLA2200(ha)) |
| 2756 | loop_id = (uint16_t) |
| 2757 | ((struct gid_list_info *)id_iter)->loop_id_2100; |
| 2758 | else |
| 2759 | loop_id = le16_to_cpu( |
| 2760 | ((struct gid_list_info *)id_iter)->loop_id); |
| 2761 | id_iter += ha->gid_list_info_size; |
| 2762 | |
| 2763 | /* Bypass reserved domain fields. */ |
| 2764 | if ((domain & 0xf0) == 0xf0) |
| 2765 | continue; |
| 2766 | |
| 2767 | /* Bypass if not same domain and area of adapter. */ |
| 2768 | if (area && domain && |
| 2769 | (area != vha->d_id.b.area || domain != vha->d_id.b.domain)) |
| 2770 | continue; |
| 2771 | |
| 2772 | /* Bypass invalid local loop ID. */ |
| 2773 | if (loop_id > LAST_LOCAL_LOOP_ID) |
| 2774 | continue; |
| 2775 | |
| 2776 | /* Fill in member data. */ |
| 2777 | new_fcport->d_id.b.domain = domain; |
| 2778 | new_fcport->d_id.b.area = area; |
| 2779 | new_fcport->d_id.b.al_pa = al_pa; |
| 2780 | new_fcport->loop_id = loop_id; |
| 2781 | new_fcport->vp_idx = vha->vp_idx; |
| 2782 | rval2 = qla2x00_get_port_database(vha, new_fcport, 0); |
| 2783 | if (rval2 != QLA_SUCCESS) { |
| 2784 | ql_dbg(ql_dbg_disc, vha, 0x201a, |
| 2785 | "Failed to retrieve fcport information " |
| 2786 | "-- get_port_database=%x, loop_id=0x%04x.\n", |
| 2787 | rval2, new_fcport->loop_id); |
| 2788 | ql_dbg(ql_dbg_disc, vha, 0x201b, |
| 2789 | "Scheduling resync.\n"); |
| 2790 | set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| 2791 | continue; |
| 2792 | } |
| 2793 | |
| 2794 | /* Check for matching device in port list. */ |
| 2795 | found = 0; |
| 2796 | fcport = NULL; |
| 2797 | list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| 2798 | if (memcmp(new_fcport->port_name, fcport->port_name, |
| 2799 | WWN_SIZE)) |
| 2800 | continue; |
| 2801 | |
| 2802 | fcport->flags &= ~FCF_FABRIC_DEVICE; |
| 2803 | fcport->loop_id = new_fcport->loop_id; |
| 2804 | fcport->port_type = new_fcport->port_type; |
| 2805 | fcport->d_id.b24 = new_fcport->d_id.b24; |
| 2806 | memcpy(fcport->node_name, new_fcport->node_name, |
| 2807 | WWN_SIZE); |
| 2808 | |
| 2809 | found++; |
| 2810 | break; |
| 2811 | } |
| 2812 | |
| 2813 | if (!found) { |
| 2814 | /* New device, add to fcports list. */ |
| 2815 | if (vha->vp_idx) { |
| 2816 | new_fcport->vha = vha; |
| 2817 | new_fcport->vp_idx = vha->vp_idx; |
| 2818 | } |
| 2819 | list_add_tail(&new_fcport->list, &vha->vp_fcports); |
| 2820 | |
| 2821 | /* Allocate a new replacement fcport. */ |
| 2822 | fcport = new_fcport; |
| 2823 | new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL); |
| 2824 | if (new_fcport == NULL) { |
| 2825 | ql_log(ql_log_warn, vha, 0x201c, |
| 2826 | "Failed to allocate memory for fcport.\n"); |
| 2827 | rval = QLA_MEMORY_ALLOC_FAILED; |
| 2828 | goto cleanup_allocation; |
| 2829 | } |
| 2830 | new_fcport->flags &= ~FCF_FABRIC_DEVICE; |
| 2831 | } |
| 2832 | |
| 2833 | /* Base iIDMA settings on HBA port speed. */ |
| 2834 | fcport->fp_speed = ha->link_data_rate; |
| 2835 | |
| 2836 | qla2x00_update_fcport(vha, fcport); |
| 2837 | |
| 2838 | found_devs++; |
| 2839 | } |
| 2840 | |
| 2841 | cleanup_allocation: |
| 2842 | kfree(new_fcport); |
| 2843 | |
| 2844 | if (rval != QLA_SUCCESS) { |
| 2845 | ql_dbg(ql_dbg_disc, vha, 0x201d, |
| 2846 | "Configure local loop error exit: rval=%x.\n", rval); |
| 2847 | } |
| 2848 | |
| 2849 | return (rval); |
| 2850 | } |
| 2851 | |
| 2852 | static void |
| 2853 | qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport) |
| 2854 | { |
| 2855 | #define LS_UNKNOWN 2 |
| 2856 | static char *link_speeds[] = { "1", "2", "?", "4", "8", "10" }; |
| 2857 | char *link_speed; |
| 2858 | int rval; |
| 2859 | uint16_t mb[4]; |
| 2860 | struct qla_hw_data *ha = vha->hw; |
| 2861 | |
| 2862 | if (!IS_IIDMA_CAPABLE(ha)) |
| 2863 | return; |
| 2864 | |
| 2865 | if (atomic_read(&fcport->state) != FCS_ONLINE) |
| 2866 | return; |
| 2867 | |
| 2868 | if (fcport->fp_speed == PORT_SPEED_UNKNOWN || |
| 2869 | fcport->fp_speed > ha->link_data_rate) |
| 2870 | return; |
| 2871 | |
| 2872 | rval = qla2x00_set_idma_speed(vha, fcport->loop_id, fcport->fp_speed, |
| 2873 | mb); |
| 2874 | if (rval != QLA_SUCCESS) { |
| 2875 | ql_dbg(ql_dbg_disc, vha, 0x2004, |
| 2876 | "Unable to adjust iIDMA " |
| 2877 | "%02x%02x%02x%02x%02x%02x%02x%02x -- %04x %x %04x " |
| 2878 | "%04x.\n", fcport->port_name[0], fcport->port_name[1], |
| 2879 | fcport->port_name[2], fcport->port_name[3], |
| 2880 | fcport->port_name[4], fcport->port_name[5], |
| 2881 | fcport->port_name[6], fcport->port_name[7], rval, |
| 2882 | fcport->fp_speed, mb[0], mb[1]); |
| 2883 | } else { |
| 2884 | link_speed = link_speeds[LS_UNKNOWN]; |
| 2885 | if (fcport->fp_speed < 5) |
| 2886 | link_speed = link_speeds[fcport->fp_speed]; |
| 2887 | else if (fcport->fp_speed == 0x13) |
| 2888 | link_speed = link_speeds[5]; |
| 2889 | ql_dbg(ql_dbg_disc, vha, 0x2005, |
| 2890 | "iIDMA adjusted to %s GB/s " |
| 2891 | "on %02x%02x%02x%02x%02x%02x%02x%02x.\n", link_speed, |
| 2892 | fcport->port_name[0], fcport->port_name[1], |
| 2893 | fcport->port_name[2], fcport->port_name[3], |
| 2894 | fcport->port_name[4], fcport->port_name[5], |
| 2895 | fcport->port_name[6], fcport->port_name[7]); |
| 2896 | } |
| 2897 | } |
| 2898 | |
| 2899 | static void |
| 2900 | qla2x00_reg_remote_port(scsi_qla_host_t *vha, fc_port_t *fcport) |
| 2901 | { |
| 2902 | struct fc_rport_identifiers rport_ids; |
| 2903 | struct fc_rport *rport; |
| 2904 | unsigned long flags; |
| 2905 | |
| 2906 | qla2x00_rport_del(fcport); |
| 2907 | |
| 2908 | rport_ids.node_name = wwn_to_u64(fcport->node_name); |
| 2909 | rport_ids.port_name = wwn_to_u64(fcport->port_name); |
| 2910 | rport_ids.port_id = fcport->d_id.b.domain << 16 | |
| 2911 | fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa; |
| 2912 | rport_ids.roles = FC_RPORT_ROLE_UNKNOWN; |
| 2913 | fcport->rport = rport = fc_remote_port_add(vha->host, 0, &rport_ids); |
| 2914 | if (!rport) { |
| 2915 | ql_log(ql_log_warn, vha, 0x2006, |
| 2916 | "Unable to allocate fc remote port.\n"); |
| 2917 | return; |
| 2918 | } |
| 2919 | spin_lock_irqsave(fcport->vha->host->host_lock, flags); |
| 2920 | *((fc_port_t **)rport->dd_data) = fcport; |
| 2921 | spin_unlock_irqrestore(fcport->vha->host->host_lock, flags); |
| 2922 | |
| 2923 | rport->supported_classes = fcport->supported_classes; |
| 2924 | |
| 2925 | rport_ids.roles = FC_RPORT_ROLE_UNKNOWN; |
| 2926 | if (fcport->port_type == FCT_INITIATOR) |
| 2927 | rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR; |
| 2928 | if (fcport->port_type == FCT_TARGET) |
| 2929 | rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET; |
| 2930 | fc_remote_port_rolechg(rport, rport_ids.roles); |
| 2931 | } |
| 2932 | |
| 2933 | /* |
| 2934 | * qla2x00_update_fcport |
| 2935 | * Updates device on list. |
| 2936 | * |
| 2937 | * Input: |
| 2938 | * ha = adapter block pointer. |
| 2939 | * fcport = port structure pointer. |
| 2940 | * |
| 2941 | * Return: |
| 2942 | * 0 - Success |
| 2943 | * BIT_0 - error |
| 2944 | * |
| 2945 | * Context: |
| 2946 | * Kernel context. |
| 2947 | */ |
| 2948 | void |
| 2949 | qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport) |
| 2950 | { |
| 2951 | fcport->vha = vha; |
| 2952 | fcport->login_retry = 0; |
| 2953 | fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT); |
| 2954 | |
| 2955 | qla2x00_iidma_fcport(vha, fcport); |
| 2956 | qla24xx_update_fcport_fcp_prio(vha, fcport); |
| 2957 | qla2x00_reg_remote_port(vha, fcport); |
| 2958 | qla2x00_set_fcport_state(fcport, FCS_ONLINE); |
| 2959 | } |
| 2960 | |
| 2961 | /* |
| 2962 | * qla2x00_configure_fabric |
| 2963 | * Setup SNS devices with loop ID's. |
| 2964 | * |
| 2965 | * Input: |
| 2966 | * ha = adapter block pointer. |
| 2967 | * |
| 2968 | * Returns: |
| 2969 | * 0 = success. |
| 2970 | * BIT_0 = error |
| 2971 | */ |
| 2972 | static int |
| 2973 | qla2x00_configure_fabric(scsi_qla_host_t *vha) |
| 2974 | { |
| 2975 | int rval, rval2; |
| 2976 | fc_port_t *fcport, *fcptemp; |
| 2977 | uint16_t next_loopid; |
| 2978 | uint16_t mb[MAILBOX_REGISTER_COUNT]; |
| 2979 | uint16_t loop_id; |
| 2980 | LIST_HEAD(new_fcports); |
| 2981 | struct qla_hw_data *ha = vha->hw; |
| 2982 | struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); |
| 2983 | |
| 2984 | /* If FL port exists, then SNS is present */ |
| 2985 | if (IS_FWI2_CAPABLE(ha)) |
| 2986 | loop_id = NPH_F_PORT; |
| 2987 | else |
| 2988 | loop_id = SNS_FL_PORT; |
| 2989 | rval = qla2x00_get_port_name(vha, loop_id, vha->fabric_node_name, 1); |
| 2990 | if (rval != QLA_SUCCESS) { |
| 2991 | ql_dbg(ql_dbg_disc, vha, 0x201f, |
| 2992 | "MBX_GET_PORT_NAME failed, No FL Port.\n"); |
| 2993 | |
| 2994 | vha->device_flags &= ~SWITCH_FOUND; |
| 2995 | return (QLA_SUCCESS); |
| 2996 | } |
| 2997 | vha->device_flags |= SWITCH_FOUND; |
| 2998 | |
| 2999 | /* Mark devices that need re-synchronization. */ |
| 3000 | rval2 = qla2x00_device_resync(vha); |
| 3001 | if (rval2 == QLA_RSCNS_HANDLED) { |
| 3002 | /* No point doing the scan, just continue. */ |
| 3003 | return (QLA_SUCCESS); |
| 3004 | } |
| 3005 | do { |
| 3006 | /* FDMI support. */ |
| 3007 | if (ql2xfdmienable && |
| 3008 | test_and_clear_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags)) |
| 3009 | qla2x00_fdmi_register(vha); |
| 3010 | |
| 3011 | /* Ensure we are logged into the SNS. */ |
| 3012 | if (IS_FWI2_CAPABLE(ha)) |
| 3013 | loop_id = NPH_SNS; |
| 3014 | else |
| 3015 | loop_id = SIMPLE_NAME_SERVER; |
| 3016 | ha->isp_ops->fabric_login(vha, loop_id, 0xff, 0xff, |
| 3017 | 0xfc, mb, BIT_1 | BIT_0); |
| 3018 | if (mb[0] != MBS_COMMAND_COMPLETE) { |
| 3019 | ql_dbg(ql_dbg_disc, vha, 0x2042, |
| 3020 | "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x " |
| 3021 | "mb[6]=%x mb[7]=%x.\n", loop_id, mb[0], mb[1], |
| 3022 | mb[2], mb[6], mb[7]); |
| 3023 | return (QLA_SUCCESS); |
| 3024 | } |
| 3025 | |
| 3026 | if (test_and_clear_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags)) { |
| 3027 | if (qla2x00_rft_id(vha)) { |
| 3028 | /* EMPTY */ |
| 3029 | ql_dbg(ql_dbg_disc, vha, 0x2045, |
| 3030 | "Register FC-4 TYPE failed.\n"); |
| 3031 | } |
| 3032 | if (qla2x00_rff_id(vha)) { |
| 3033 | /* EMPTY */ |
| 3034 | ql_dbg(ql_dbg_disc, vha, 0x2049, |
| 3035 | "Register FC-4 Features failed.\n"); |
| 3036 | } |
| 3037 | if (qla2x00_rnn_id(vha)) { |
| 3038 | /* EMPTY */ |
| 3039 | ql_dbg(ql_dbg_disc, vha, 0x204f, |
| 3040 | "Register Node Name failed.\n"); |
| 3041 | } else if (qla2x00_rsnn_nn(vha)) { |
| 3042 | /* EMPTY */ |
| 3043 | ql_dbg(ql_dbg_disc, vha, 0x2053, |
| 3044 | "Register Symobilic Node Name failed.\n"); |
| 3045 | } |
| 3046 | } |
| 3047 | |
| 3048 | rval = qla2x00_find_all_fabric_devs(vha, &new_fcports); |
| 3049 | if (rval != QLA_SUCCESS) |
| 3050 | break; |
| 3051 | |
| 3052 | /* |
| 3053 | * Logout all previous fabric devices marked lost, except |
| 3054 | * FCP2 devices. |
| 3055 | */ |
| 3056 | list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| 3057 | if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) |
| 3058 | break; |
| 3059 | |
| 3060 | if ((fcport->flags & FCF_FABRIC_DEVICE) == 0) |
| 3061 | continue; |
| 3062 | |
| 3063 | if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) { |
| 3064 | qla2x00_mark_device_lost(vha, fcport, |
| 3065 | ql2xplogiabsentdevice, 0); |
| 3066 | if (fcport->loop_id != FC_NO_LOOP_ID && |
| 3067 | (fcport->flags & FCF_FCP2_DEVICE) == 0 && |
| 3068 | fcport->port_type != FCT_INITIATOR && |
| 3069 | fcport->port_type != FCT_BROADCAST) { |
| 3070 | ha->isp_ops->fabric_logout(vha, |
| 3071 | fcport->loop_id, |
| 3072 | fcport->d_id.b.domain, |
| 3073 | fcport->d_id.b.area, |
| 3074 | fcport->d_id.b.al_pa); |
| 3075 | fcport->loop_id = FC_NO_LOOP_ID; |
| 3076 | } |
| 3077 | } |
| 3078 | } |
| 3079 | |
| 3080 | /* Starting free loop ID. */ |
| 3081 | next_loopid = ha->min_external_loopid; |
| 3082 | |
| 3083 | /* |
| 3084 | * Scan through our port list and login entries that need to be |
| 3085 | * logged in. |
| 3086 | */ |
| 3087 | list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| 3088 | if (atomic_read(&vha->loop_down_timer) || |
| 3089 | test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) |
| 3090 | break; |
| 3091 | |
| 3092 | if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 || |
| 3093 | (fcport->flags & FCF_LOGIN_NEEDED) == 0) |
| 3094 | continue; |
| 3095 | |
| 3096 | if (fcport->loop_id == FC_NO_LOOP_ID) { |
| 3097 | fcport->loop_id = next_loopid; |
| 3098 | rval = qla2x00_find_new_loop_id( |
| 3099 | base_vha, fcport); |
| 3100 | if (rval != QLA_SUCCESS) { |
| 3101 | /* Ran out of IDs to use */ |
| 3102 | break; |
| 3103 | } |
| 3104 | } |
| 3105 | /* Login and update database */ |
| 3106 | qla2x00_fabric_dev_login(vha, fcport, &next_loopid); |
| 3107 | } |
| 3108 | |
| 3109 | /* Exit if out of loop IDs. */ |
| 3110 | if (rval != QLA_SUCCESS) { |
| 3111 | break; |
| 3112 | } |
| 3113 | |
| 3114 | /* |
| 3115 | * Login and add the new devices to our port list. |
| 3116 | */ |
| 3117 | list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) { |
| 3118 | if (atomic_read(&vha->loop_down_timer) || |
| 3119 | test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) |
| 3120 | break; |
| 3121 | |
| 3122 | /* Find a new loop ID to use. */ |
| 3123 | fcport->loop_id = next_loopid; |
| 3124 | rval = qla2x00_find_new_loop_id(base_vha, fcport); |
| 3125 | if (rval != QLA_SUCCESS) { |
| 3126 | /* Ran out of IDs to use */ |
| 3127 | break; |
| 3128 | } |
| 3129 | |
| 3130 | /* Login and update database */ |
| 3131 | qla2x00_fabric_dev_login(vha, fcport, &next_loopid); |
| 3132 | |
| 3133 | if (vha->vp_idx) { |
| 3134 | fcport->vha = vha; |
| 3135 | fcport->vp_idx = vha->vp_idx; |
| 3136 | } |
| 3137 | list_move_tail(&fcport->list, &vha->vp_fcports); |
| 3138 | } |
| 3139 | } while (0); |
| 3140 | |
| 3141 | /* Free all new device structures not processed. */ |
| 3142 | list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) { |
| 3143 | list_del(&fcport->list); |
| 3144 | kfree(fcport); |
| 3145 | } |
| 3146 | |
| 3147 | if (rval) { |
| 3148 | ql_dbg(ql_dbg_disc, vha, 0x2068, |
| 3149 | "Configure fabric error exit rval=%d.\n", rval); |
| 3150 | } |
| 3151 | |
| 3152 | return (rval); |
| 3153 | } |
| 3154 | |
| 3155 | /* |
| 3156 | * qla2x00_find_all_fabric_devs |
| 3157 | * |
| 3158 | * Input: |
| 3159 | * ha = adapter block pointer. |
| 3160 | * dev = database device entry pointer. |
| 3161 | * |
| 3162 | * Returns: |
| 3163 | * 0 = success. |
| 3164 | * |
| 3165 | * Context: |
| 3166 | * Kernel context. |
| 3167 | */ |
| 3168 | static int |
| 3169 | qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, |
| 3170 | struct list_head *new_fcports) |
| 3171 | { |
| 3172 | int rval; |
| 3173 | uint16_t loop_id; |
| 3174 | fc_port_t *fcport, *new_fcport, *fcptemp; |
| 3175 | int found; |
| 3176 | |
| 3177 | sw_info_t *swl; |
| 3178 | int swl_idx; |
| 3179 | int first_dev, last_dev; |
| 3180 | port_id_t wrap = {}, nxt_d_id; |
| 3181 | struct qla_hw_data *ha = vha->hw; |
| 3182 | struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev); |
| 3183 | struct scsi_qla_host *tvp; |
| 3184 | |
| 3185 | rval = QLA_SUCCESS; |
| 3186 | |
| 3187 | /* Try GID_PT to get device list, else GAN. */ |
| 3188 | swl = kcalloc(MAX_FIBRE_DEVICES, sizeof(sw_info_t), GFP_KERNEL); |
| 3189 | if (!swl) { |
| 3190 | /*EMPTY*/ |
| 3191 | ql_dbg(ql_dbg_disc, vha, 0x2054, |
| 3192 | "GID_PT allocations failed, fallback on GA_NXT.\n"); |
| 3193 | } else { |
| 3194 | if (qla2x00_gid_pt(vha, swl) != QLA_SUCCESS) { |
| 3195 | kfree(swl); |
| 3196 | swl = NULL; |
| 3197 | } else if (qla2x00_gpn_id(vha, swl) != QLA_SUCCESS) { |
| 3198 | kfree(swl); |
| 3199 | swl = NULL; |
| 3200 | } else if (qla2x00_gnn_id(vha, swl) != QLA_SUCCESS) { |
| 3201 | kfree(swl); |
| 3202 | swl = NULL; |
| 3203 | } else if (ql2xiidmaenable && |
| 3204 | qla2x00_gfpn_id(vha, swl) == QLA_SUCCESS) { |
| 3205 | qla2x00_gpsc(vha, swl); |
| 3206 | } |
| 3207 | |
| 3208 | /* If other queries succeeded probe for FC-4 type */ |
| 3209 | if (swl) |
| 3210 | qla2x00_gff_id(vha, swl); |
| 3211 | } |
| 3212 | swl_idx = 0; |
| 3213 | |
| 3214 | /* Allocate temporary fcport for any new fcports discovered. */ |
| 3215 | new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL); |
| 3216 | if (new_fcport == NULL) { |
| 3217 | ql_log(ql_log_warn, vha, 0x205e, |
| 3218 | "Failed to allocate memory for fcport.\n"); |
| 3219 | kfree(swl); |
| 3220 | return (QLA_MEMORY_ALLOC_FAILED); |
| 3221 | } |
| 3222 | new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED); |
| 3223 | /* Set start port ID scan at adapter ID. */ |
| 3224 | first_dev = 1; |
| 3225 | last_dev = 0; |
| 3226 | |
| 3227 | /* Starting free loop ID. */ |
| 3228 | loop_id = ha->min_external_loopid; |
| 3229 | for (; loop_id <= ha->max_loop_id; loop_id++) { |
| 3230 | if (qla2x00_is_reserved_id(vha, loop_id)) |
| 3231 | continue; |
| 3232 | |
| 3233 | if (ha->current_topology == ISP_CFG_FL && |
| 3234 | (atomic_read(&vha->loop_down_timer) || |
| 3235 | LOOP_TRANSITION(vha))) { |
| 3236 | atomic_set(&vha->loop_down_timer, 0); |
| 3237 | set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| 3238 | set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); |
| 3239 | break; |
| 3240 | } |
| 3241 | |
| 3242 | if (swl != NULL) { |
| 3243 | if (last_dev) { |
| 3244 | wrap.b24 = new_fcport->d_id.b24; |
| 3245 | } else { |
| 3246 | new_fcport->d_id.b24 = swl[swl_idx].d_id.b24; |
| 3247 | memcpy(new_fcport->node_name, |
| 3248 | swl[swl_idx].node_name, WWN_SIZE); |
| 3249 | memcpy(new_fcport->port_name, |
| 3250 | swl[swl_idx].port_name, WWN_SIZE); |
| 3251 | memcpy(new_fcport->fabric_port_name, |
| 3252 | swl[swl_idx].fabric_port_name, WWN_SIZE); |
| 3253 | new_fcport->fp_speed = swl[swl_idx].fp_speed; |
| 3254 | new_fcport->fc4_type = swl[swl_idx].fc4_type; |
| 3255 | |
| 3256 | if (swl[swl_idx].d_id.b.rsvd_1 != 0) { |
| 3257 | last_dev = 1; |
| 3258 | } |
| 3259 | swl_idx++; |
| 3260 | } |
| 3261 | } else { |
| 3262 | /* Send GA_NXT to the switch */ |
| 3263 | rval = qla2x00_ga_nxt(vha, new_fcport); |
| 3264 | if (rval != QLA_SUCCESS) { |
| 3265 | ql_log(ql_log_warn, vha, 0x2064, |
| 3266 | "SNS scan failed -- assuming " |
| 3267 | "zero-entry result.\n"); |
| 3268 | list_for_each_entry_safe(fcport, fcptemp, |
| 3269 | new_fcports, list) { |
| 3270 | list_del(&fcport->list); |
| 3271 | kfree(fcport); |
| 3272 | } |
| 3273 | rval = QLA_SUCCESS; |
| 3274 | break; |
| 3275 | } |
| 3276 | } |
| 3277 | |
| 3278 | /* If wrap on switch device list, exit. */ |
| 3279 | if (first_dev) { |
| 3280 | wrap.b24 = new_fcport->d_id.b24; |
| 3281 | first_dev = 0; |
| 3282 | } else if (new_fcport->d_id.b24 == wrap.b24) { |
| 3283 | ql_dbg(ql_dbg_disc, vha, 0x2065, |
| 3284 | "Device wrap (%02x%02x%02x).\n", |
| 3285 | new_fcport->d_id.b.domain, |
| 3286 | new_fcport->d_id.b.area, |
| 3287 | new_fcport->d_id.b.al_pa); |
| 3288 | break; |
| 3289 | } |
| 3290 | |
| 3291 | /* Bypass if same physical adapter. */ |
| 3292 | if (new_fcport->d_id.b24 == base_vha->d_id.b24) |
| 3293 | continue; |
| 3294 | |
| 3295 | /* Bypass virtual ports of the same host. */ |
| 3296 | found = 0; |
| 3297 | if (ha->num_vhosts) { |
| 3298 | unsigned long flags; |
| 3299 | |
| 3300 | spin_lock_irqsave(&ha->vport_slock, flags); |
| 3301 | list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) { |
| 3302 | if (new_fcport->d_id.b24 == vp->d_id.b24) { |
| 3303 | found = 1; |
| 3304 | break; |
| 3305 | } |
| 3306 | } |
| 3307 | spin_unlock_irqrestore(&ha->vport_slock, flags); |
| 3308 | |
| 3309 | if (found) |
| 3310 | continue; |
| 3311 | } |
| 3312 | |
| 3313 | /* Bypass if same domain and area of adapter. */ |
| 3314 | if (((new_fcport->d_id.b24 & 0xffff00) == |
| 3315 | (vha->d_id.b24 & 0xffff00)) && ha->current_topology == |
| 3316 | ISP_CFG_FL) |
| 3317 | continue; |
| 3318 | |
| 3319 | /* Bypass reserved domain fields. */ |
| 3320 | if ((new_fcport->d_id.b.domain & 0xf0) == 0xf0) |
| 3321 | continue; |
| 3322 | |
| 3323 | /* Bypass ports whose FCP-4 type is not FCP_SCSI */ |
| 3324 | if (ql2xgffidenable && |
| 3325 | (new_fcport->fc4_type != FC4_TYPE_FCP_SCSI && |
| 3326 | new_fcport->fc4_type != FC4_TYPE_UNKNOWN)) |
| 3327 | continue; |
| 3328 | |
| 3329 | /* Locate matching device in database. */ |
| 3330 | found = 0; |
| 3331 | list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| 3332 | if (memcmp(new_fcport->port_name, fcport->port_name, |
| 3333 | WWN_SIZE)) |
| 3334 | continue; |
| 3335 | |
| 3336 | found++; |
| 3337 | |
| 3338 | /* Update port state. */ |
| 3339 | memcpy(fcport->fabric_port_name, |
| 3340 | new_fcport->fabric_port_name, WWN_SIZE); |
| 3341 | fcport->fp_speed = new_fcport->fp_speed; |
| 3342 | |
| 3343 | /* |
| 3344 | * If address the same and state FCS_ONLINE, nothing |
| 3345 | * changed. |
| 3346 | */ |
| 3347 | if (fcport->d_id.b24 == new_fcport->d_id.b24 && |
| 3348 | atomic_read(&fcport->state) == FCS_ONLINE) { |
| 3349 | break; |
| 3350 | } |
| 3351 | |
| 3352 | /* |
| 3353 | * If device was not a fabric device before. |
| 3354 | */ |
| 3355 | if ((fcport->flags & FCF_FABRIC_DEVICE) == 0) { |
| 3356 | fcport->d_id.b24 = new_fcport->d_id.b24; |
| 3357 | fcport->loop_id = FC_NO_LOOP_ID; |
| 3358 | fcport->flags |= (FCF_FABRIC_DEVICE | |
| 3359 | FCF_LOGIN_NEEDED); |
| 3360 | break; |
| 3361 | } |
| 3362 | |
| 3363 | /* |
| 3364 | * Port ID changed or device was marked to be updated; |
| 3365 | * Log it out if still logged in and mark it for |
| 3366 | * relogin later. |
| 3367 | */ |
| 3368 | fcport->d_id.b24 = new_fcport->d_id.b24; |
| 3369 | fcport->flags |= FCF_LOGIN_NEEDED; |
| 3370 | if (fcport->loop_id != FC_NO_LOOP_ID && |
| 3371 | (fcport->flags & FCF_FCP2_DEVICE) == 0 && |
| 3372 | fcport->port_type != FCT_INITIATOR && |
| 3373 | fcport->port_type != FCT_BROADCAST) { |
| 3374 | ha->isp_ops->fabric_logout(vha, fcport->loop_id, |
| 3375 | fcport->d_id.b.domain, fcport->d_id.b.area, |
| 3376 | fcport->d_id.b.al_pa); |
| 3377 | fcport->loop_id = FC_NO_LOOP_ID; |
| 3378 | } |
| 3379 | |
| 3380 | break; |
| 3381 | } |
| 3382 | |
| 3383 | if (found) |
| 3384 | continue; |
| 3385 | /* If device was not in our fcports list, then add it. */ |
| 3386 | list_add_tail(&new_fcport->list, new_fcports); |
| 3387 | |
| 3388 | /* Allocate a new replacement fcport. */ |
| 3389 | nxt_d_id.b24 = new_fcport->d_id.b24; |
| 3390 | new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL); |
| 3391 | if (new_fcport == NULL) { |
| 3392 | ql_log(ql_log_warn, vha, 0x2066, |
| 3393 | "Memory allocation failed for fcport.\n"); |
| 3394 | kfree(swl); |
| 3395 | return (QLA_MEMORY_ALLOC_FAILED); |
| 3396 | } |
| 3397 | new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED); |
| 3398 | new_fcport->d_id.b24 = nxt_d_id.b24; |
| 3399 | } |
| 3400 | |
| 3401 | kfree(swl); |
| 3402 | kfree(new_fcport); |
| 3403 | |
| 3404 | return (rval); |
| 3405 | } |
| 3406 | |
| 3407 | /* |
| 3408 | * qla2x00_find_new_loop_id |
| 3409 | * Scan through our port list and find a new usable loop ID. |
| 3410 | * |
| 3411 | * Input: |
| 3412 | * ha: adapter state pointer. |
| 3413 | * dev: port structure pointer. |
| 3414 | * |
| 3415 | * Returns: |
| 3416 | * qla2x00 local function return status code. |
| 3417 | * |
| 3418 | * Context: |
| 3419 | * Kernel context. |
| 3420 | */ |
| 3421 | int |
| 3422 | qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev) |
| 3423 | { |
| 3424 | int rval; |
| 3425 | int found; |
| 3426 | fc_port_t *fcport; |
| 3427 | uint16_t first_loop_id; |
| 3428 | struct qla_hw_data *ha = vha->hw; |
| 3429 | struct scsi_qla_host *vp; |
| 3430 | struct scsi_qla_host *tvp; |
| 3431 | unsigned long flags = 0; |
| 3432 | |
| 3433 | rval = QLA_SUCCESS; |
| 3434 | |
| 3435 | /* Save starting loop ID. */ |
| 3436 | first_loop_id = dev->loop_id; |
| 3437 | |
| 3438 | for (;;) { |
| 3439 | /* Skip loop ID if already used by adapter. */ |
| 3440 | if (dev->loop_id == vha->loop_id) |
| 3441 | dev->loop_id++; |
| 3442 | |
| 3443 | /* Skip reserved loop IDs. */ |
| 3444 | while (qla2x00_is_reserved_id(vha, dev->loop_id)) |
| 3445 | dev->loop_id++; |
| 3446 | |
| 3447 | /* Reset loop ID if passed the end. */ |
| 3448 | if (dev->loop_id > ha->max_loop_id) { |
| 3449 | /* first loop ID. */ |
| 3450 | dev->loop_id = ha->min_external_loopid; |
| 3451 | } |
| 3452 | |
| 3453 | /* Check for loop ID being already in use. */ |
| 3454 | found = 0; |
| 3455 | fcport = NULL; |
| 3456 | |
| 3457 | spin_lock_irqsave(&ha->vport_slock, flags); |
| 3458 | list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) { |
| 3459 | list_for_each_entry(fcport, &vp->vp_fcports, list) { |
| 3460 | if (fcport->loop_id == dev->loop_id && |
| 3461 | fcport != dev) { |
| 3462 | /* ID possibly in use */ |
| 3463 | found++; |
| 3464 | break; |
| 3465 | } |
| 3466 | } |
| 3467 | if (found) |
| 3468 | break; |
| 3469 | } |
| 3470 | spin_unlock_irqrestore(&ha->vport_slock, flags); |
| 3471 | |
| 3472 | /* If not in use then it is free to use. */ |
| 3473 | if (!found) { |
| 3474 | break; |
| 3475 | } |
| 3476 | |
| 3477 | /* ID in use. Try next value. */ |
| 3478 | dev->loop_id++; |
| 3479 | |
| 3480 | /* If wrap around. No free ID to use. */ |
| 3481 | if (dev->loop_id == first_loop_id) { |
| 3482 | dev->loop_id = FC_NO_LOOP_ID; |
| 3483 | rval = QLA_FUNCTION_FAILED; |
| 3484 | break; |
| 3485 | } |
| 3486 | } |
| 3487 | |
| 3488 | return (rval); |
| 3489 | } |
| 3490 | |
| 3491 | /* |
| 3492 | * qla2x00_device_resync |
| 3493 | * Marks devices in the database that needs resynchronization. |
| 3494 | * |
| 3495 | * Input: |
| 3496 | * ha = adapter block pointer. |
| 3497 | * |
| 3498 | * Context: |
| 3499 | * Kernel context. |
| 3500 | */ |
| 3501 | static int |
| 3502 | qla2x00_device_resync(scsi_qla_host_t *vha) |
| 3503 | { |
| 3504 | int rval; |
| 3505 | uint32_t mask; |
| 3506 | fc_port_t *fcport; |
| 3507 | uint32_t rscn_entry; |
| 3508 | uint8_t rscn_out_iter; |
| 3509 | uint8_t format; |
| 3510 | port_id_t d_id = {}; |
| 3511 | |
| 3512 | rval = QLA_RSCNS_HANDLED; |
| 3513 | |
| 3514 | while (vha->rscn_out_ptr != vha->rscn_in_ptr || |
| 3515 | vha->flags.rscn_queue_overflow) { |
| 3516 | |
| 3517 | rscn_entry = vha->rscn_queue[vha->rscn_out_ptr]; |
| 3518 | format = MSB(MSW(rscn_entry)); |
| 3519 | d_id.b.domain = LSB(MSW(rscn_entry)); |
| 3520 | d_id.b.area = MSB(LSW(rscn_entry)); |
| 3521 | d_id.b.al_pa = LSB(LSW(rscn_entry)); |
| 3522 | |
| 3523 | ql_dbg(ql_dbg_disc, vha, 0x2020, |
| 3524 | "RSCN queue entry[%d] = [%02x/%02x%02x%02x].\n", |
| 3525 | vha->rscn_out_ptr, format, d_id.b.domain, d_id.b.area, |
| 3526 | d_id.b.al_pa); |
| 3527 | |
| 3528 | vha->rscn_out_ptr++; |
| 3529 | if (vha->rscn_out_ptr == MAX_RSCN_COUNT) |
| 3530 | vha->rscn_out_ptr = 0; |
| 3531 | |
| 3532 | /* Skip duplicate entries. */ |
| 3533 | for (rscn_out_iter = vha->rscn_out_ptr; |
| 3534 | !vha->flags.rscn_queue_overflow && |
| 3535 | rscn_out_iter != vha->rscn_in_ptr; |
| 3536 | rscn_out_iter = (rscn_out_iter == |
| 3537 | (MAX_RSCN_COUNT - 1)) ? 0: rscn_out_iter + 1) { |
| 3538 | |
| 3539 | if (rscn_entry != vha->rscn_queue[rscn_out_iter]) |
| 3540 | break; |
| 3541 | |
| 3542 | ql_dbg(ql_dbg_disc, vha, 0x2021, |
| 3543 | "Skipping duplicate RSCN queue entry found at " |
| 3544 | "[%d].\n", rscn_out_iter); |
| 3545 | |
| 3546 | vha->rscn_out_ptr = rscn_out_iter; |
| 3547 | } |
| 3548 | |
| 3549 | /* Queue overflow, set switch default case. */ |
| 3550 | if (vha->flags.rscn_queue_overflow) { |
| 3551 | ql_dbg(ql_dbg_disc, vha, 0x2022, |
| 3552 | "device_resync: rscn overflow.\n"); |
| 3553 | |
| 3554 | format = 3; |
| 3555 | vha->flags.rscn_queue_overflow = 0; |
| 3556 | } |
| 3557 | |
| 3558 | switch (format) { |
| 3559 | case 0: |
| 3560 | mask = 0xffffff; |
| 3561 | break; |
| 3562 | case 1: |
| 3563 | mask = 0xffff00; |
| 3564 | break; |
| 3565 | case 2: |
| 3566 | mask = 0xff0000; |
| 3567 | break; |
| 3568 | default: |
| 3569 | mask = 0x0; |
| 3570 | d_id.b24 = 0; |
| 3571 | vha->rscn_out_ptr = vha->rscn_in_ptr; |
| 3572 | break; |
| 3573 | } |
| 3574 | |
| 3575 | rval = QLA_SUCCESS; |
| 3576 | |
| 3577 | list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| 3578 | if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 || |
| 3579 | (fcport->d_id.b24 & mask) != d_id.b24 || |
| 3580 | fcport->port_type == FCT_BROADCAST) |
| 3581 | continue; |
| 3582 | |
| 3583 | if (atomic_read(&fcport->state) == FCS_ONLINE) { |
| 3584 | if (format != 3 || |
| 3585 | fcport->port_type != FCT_INITIATOR) { |
| 3586 | qla2x00_mark_device_lost(vha, fcport, |
| 3587 | 0, 0); |
| 3588 | } |
| 3589 | } |
| 3590 | } |
| 3591 | } |
| 3592 | return (rval); |
| 3593 | } |
| 3594 | |
| 3595 | /* |
| 3596 | * qla2x00_fabric_dev_login |
| 3597 | * Login fabric target device and update FC port database. |
| 3598 | * |
| 3599 | * Input: |
| 3600 | * ha: adapter state pointer. |
| 3601 | * fcport: port structure list pointer. |
| 3602 | * next_loopid: contains value of a new loop ID that can be used |
| 3603 | * by the next login attempt. |
| 3604 | * |
| 3605 | * Returns: |
| 3606 | * qla2x00 local function return status code. |
| 3607 | * |
| 3608 | * Context: |
| 3609 | * Kernel context. |
| 3610 | */ |
| 3611 | static int |
| 3612 | qla2x00_fabric_dev_login(scsi_qla_host_t *vha, fc_port_t *fcport, |
| 3613 | uint16_t *next_loopid) |
| 3614 | { |
| 3615 | int rval; |
| 3616 | int retry; |
| 3617 | uint8_t opts; |
| 3618 | struct qla_hw_data *ha = vha->hw; |
| 3619 | |
| 3620 | rval = QLA_SUCCESS; |
| 3621 | retry = 0; |
| 3622 | |
| 3623 | if (IS_ALOGIO_CAPABLE(ha)) { |
| 3624 | if (fcport->flags & FCF_ASYNC_SENT) |
| 3625 | return rval; |
| 3626 | fcport->flags |= FCF_ASYNC_SENT; |
| 3627 | rval = qla2x00_post_async_login_work(vha, fcport, NULL); |
| 3628 | if (!rval) |
| 3629 | return rval; |
| 3630 | } |
| 3631 | |
| 3632 | fcport->flags &= ~FCF_ASYNC_SENT; |
| 3633 | rval = qla2x00_fabric_login(vha, fcport, next_loopid); |
| 3634 | if (rval == QLA_SUCCESS) { |
| 3635 | /* Send an ADISC to FCP2 devices.*/ |
| 3636 | opts = 0; |
| 3637 | if (fcport->flags & FCF_FCP2_DEVICE) |
| 3638 | opts |= BIT_1; |
| 3639 | rval = qla2x00_get_port_database(vha, fcport, opts); |
| 3640 | if (rval != QLA_SUCCESS) { |
| 3641 | ha->isp_ops->fabric_logout(vha, fcport->loop_id, |
| 3642 | fcport->d_id.b.domain, fcport->d_id.b.area, |
| 3643 | fcport->d_id.b.al_pa); |
| 3644 | qla2x00_mark_device_lost(vha, fcport, 1, 0); |
| 3645 | } else { |
| 3646 | qla2x00_update_fcport(vha, fcport); |
| 3647 | } |
| 3648 | } |
| 3649 | |
| 3650 | return (rval); |
| 3651 | } |
| 3652 | |
| 3653 | /* |
| 3654 | * qla2x00_fabric_login |
| 3655 | * Issue fabric login command. |
| 3656 | * |
| 3657 | * Input: |
| 3658 | * ha = adapter block pointer. |
| 3659 | * device = pointer to FC device type structure. |
| 3660 | * |
| 3661 | * Returns: |
| 3662 | * 0 - Login successfully |
| 3663 | * 1 - Login failed |
| 3664 | * 2 - Initiator device |
| 3665 | * 3 - Fatal error |
| 3666 | */ |
| 3667 | int |
| 3668 | qla2x00_fabric_login(scsi_qla_host_t *vha, fc_port_t *fcport, |
| 3669 | uint16_t *next_loopid) |
| 3670 | { |
| 3671 | int rval; |
| 3672 | int retry; |
| 3673 | uint16_t tmp_loopid; |
| 3674 | uint16_t mb[MAILBOX_REGISTER_COUNT]; |
| 3675 | struct qla_hw_data *ha = vha->hw; |
| 3676 | |
| 3677 | retry = 0; |
| 3678 | tmp_loopid = 0; |
| 3679 | |
| 3680 | for (;;) { |
| 3681 | ql_dbg(ql_dbg_disc, vha, 0x2000, |
| 3682 | "Trying Fabric Login w/loop id 0x%04x for port " |
| 3683 | "%02x%02x%02x.\n", |
| 3684 | fcport->loop_id, fcport->d_id.b.domain, |
| 3685 | fcport->d_id.b.area, fcport->d_id.b.al_pa); |
| 3686 | |
| 3687 | /* Login fcport on switch. */ |
| 3688 | ha->isp_ops->fabric_login(vha, fcport->loop_id, |
| 3689 | fcport->d_id.b.domain, fcport->d_id.b.area, |
| 3690 | fcport->d_id.b.al_pa, mb, BIT_0); |
| 3691 | if (mb[0] == MBS_PORT_ID_USED) { |
| 3692 | /* |
| 3693 | * Device has another loop ID. The firmware team |
| 3694 | * recommends the driver perform an implicit login with |
| 3695 | * the specified ID again. The ID we just used is save |
| 3696 | * here so we return with an ID that can be tried by |
| 3697 | * the next login. |
| 3698 | */ |
| 3699 | retry++; |
| 3700 | tmp_loopid = fcport->loop_id; |
| 3701 | fcport->loop_id = mb[1]; |
| 3702 | |
| 3703 | ql_dbg(ql_dbg_disc, vha, 0x2001, |
| 3704 | "Fabric Login: port in use - next loop " |
| 3705 | "id=0x%04x, port id= %02x%02x%02x.\n", |
| 3706 | fcport->loop_id, fcport->d_id.b.domain, |
| 3707 | fcport->d_id.b.area, fcport->d_id.b.al_pa); |
| 3708 | |
| 3709 | } else if (mb[0] == MBS_COMMAND_COMPLETE) { |
| 3710 | /* |
| 3711 | * Login succeeded. |
| 3712 | */ |
| 3713 | if (retry) { |
| 3714 | /* A retry occurred before. */ |
| 3715 | *next_loopid = tmp_loopid; |
| 3716 | } else { |
| 3717 | /* |
| 3718 | * No retry occurred before. Just increment the |
| 3719 | * ID value for next login. |
| 3720 | */ |
| 3721 | *next_loopid = (fcport->loop_id + 1); |
| 3722 | } |
| 3723 | |
| 3724 | if (mb[1] & BIT_0) { |
| 3725 | fcport->port_type = FCT_INITIATOR; |
| 3726 | } else { |
| 3727 | fcport->port_type = FCT_TARGET; |
| 3728 | if (mb[1] & BIT_1) { |
| 3729 | fcport->flags |= FCF_FCP2_DEVICE; |
| 3730 | } |
| 3731 | } |
| 3732 | |
| 3733 | if (mb[10] & BIT_0) |
| 3734 | fcport->supported_classes |= FC_COS_CLASS2; |
| 3735 | if (mb[10] & BIT_1) |
| 3736 | fcport->supported_classes |= FC_COS_CLASS3; |
| 3737 | |
| 3738 | rval = QLA_SUCCESS; |
| 3739 | break; |
| 3740 | } else if (mb[0] == MBS_LOOP_ID_USED) { |
| 3741 | /* |
| 3742 | * Loop ID already used, try next loop ID. |
| 3743 | */ |
| 3744 | fcport->loop_id++; |
| 3745 | rval = qla2x00_find_new_loop_id(vha, fcport); |
| 3746 | if (rval != QLA_SUCCESS) { |
| 3747 | /* Ran out of loop IDs to use */ |
| 3748 | break; |
| 3749 | } |
| 3750 | } else if (mb[0] == MBS_COMMAND_ERROR) { |
| 3751 | /* |
| 3752 | * Firmware possibly timed out during login. If NO |
| 3753 | * retries are left to do then the device is declared |
| 3754 | * dead. |
| 3755 | */ |
| 3756 | *next_loopid = fcport->loop_id; |
| 3757 | ha->isp_ops->fabric_logout(vha, fcport->loop_id, |
| 3758 | fcport->d_id.b.domain, fcport->d_id.b.area, |
| 3759 | fcport->d_id.b.al_pa); |
| 3760 | qla2x00_mark_device_lost(vha, fcport, 1, 0); |
| 3761 | |
| 3762 | rval = 1; |
| 3763 | break; |
| 3764 | } else { |
| 3765 | /* |
| 3766 | * unrecoverable / not handled error |
| 3767 | */ |
| 3768 | ql_dbg(ql_dbg_disc, vha, 0x2002, |
| 3769 | "Failed=%x port_id=%02x%02x%02x loop_id=%x " |
| 3770 | "jiffies=%lx.\n", mb[0], fcport->d_id.b.domain, |
| 3771 | fcport->d_id.b.area, fcport->d_id.b.al_pa, |
| 3772 | fcport->loop_id, jiffies); |
| 3773 | |
| 3774 | *next_loopid = fcport->loop_id; |
| 3775 | ha->isp_ops->fabric_logout(vha, fcport->loop_id, |
| 3776 | fcport->d_id.b.domain, fcport->d_id.b.area, |
| 3777 | fcport->d_id.b.al_pa); |
| 3778 | fcport->loop_id = FC_NO_LOOP_ID; |
| 3779 | fcport->login_retry = 0; |
| 3780 | |
| 3781 | rval = 3; |
| 3782 | break; |
| 3783 | } |
| 3784 | } |
| 3785 | |
| 3786 | return (rval); |
| 3787 | } |
| 3788 | |
| 3789 | /* |
| 3790 | * qla2x00_local_device_login |
| 3791 | * Issue local device login command. |
| 3792 | * |
| 3793 | * Input: |
| 3794 | * ha = adapter block pointer. |
| 3795 | * loop_id = loop id of device to login to. |
| 3796 | * |
| 3797 | * Returns (Where's the #define!!!!): |
| 3798 | * 0 - Login successfully |
| 3799 | * 1 - Login failed |
| 3800 | * 3 - Fatal error |
| 3801 | */ |
| 3802 | int |
| 3803 | qla2x00_local_device_login(scsi_qla_host_t *vha, fc_port_t *fcport) |
| 3804 | { |
| 3805 | int rval; |
| 3806 | uint16_t mb[MAILBOX_REGISTER_COUNT]; |
| 3807 | |
| 3808 | memset(mb, 0, sizeof(mb)); |
| 3809 | rval = qla2x00_login_local_device(vha, fcport, mb, BIT_0); |
| 3810 | if (rval == QLA_SUCCESS) { |
| 3811 | /* Interrogate mailbox registers for any errors */ |
| 3812 | if (mb[0] == MBS_COMMAND_ERROR) |
| 3813 | rval = 1; |
| 3814 | else if (mb[0] == MBS_COMMAND_PARAMETER_ERROR) |
| 3815 | /* device not in PCB table */ |
| 3816 | rval = 3; |
| 3817 | } |
| 3818 | |
| 3819 | return (rval); |
| 3820 | } |
| 3821 | |
| 3822 | /* |
| 3823 | * qla2x00_loop_resync |
| 3824 | * Resync with fibre channel devices. |
| 3825 | * |
| 3826 | * Input: |
| 3827 | * ha = adapter block pointer. |
| 3828 | * |
| 3829 | * Returns: |
| 3830 | * 0 = success |
| 3831 | */ |
| 3832 | int |
| 3833 | qla2x00_loop_resync(scsi_qla_host_t *vha) |
| 3834 | { |
| 3835 | int rval = QLA_SUCCESS; |
| 3836 | uint32_t wait_time; |
| 3837 | struct req_que *req; |
| 3838 | struct rsp_que *rsp; |
| 3839 | |
| 3840 | if (vha->hw->flags.cpu_affinity_enabled) |
| 3841 | req = vha->hw->req_q_map[0]; |
| 3842 | else |
| 3843 | req = vha->req; |
| 3844 | rsp = req->rsp; |
| 3845 | |
| 3846 | clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); |
| 3847 | if (vha->flags.online) { |
| 3848 | if (!(rval = qla2x00_fw_ready(vha))) { |
| 3849 | /* Wait at most MAX_TARGET RSCNs for a stable link. */ |
| 3850 | wait_time = 256; |
| 3851 | do { |
| 3852 | /* Issue a marker after FW becomes ready. */ |
| 3853 | qla2x00_marker(vha, req, rsp, 0, 0, |
| 3854 | MK_SYNC_ALL); |
| 3855 | vha->marker_needed = 0; |
| 3856 | |
| 3857 | /* Remap devices on Loop. */ |
| 3858 | clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| 3859 | |
| 3860 | qla2x00_configure_loop(vha); |
| 3861 | wait_time--; |
| 3862 | } while (!atomic_read(&vha->loop_down_timer) && |
| 3863 | !(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) |
| 3864 | && wait_time && (test_bit(LOOP_RESYNC_NEEDED, |
| 3865 | &vha->dpc_flags))); |
| 3866 | } |
| 3867 | } |
| 3868 | |
| 3869 | if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) |
| 3870 | return (QLA_FUNCTION_FAILED); |
| 3871 | |
| 3872 | if (rval) |
| 3873 | ql_dbg(ql_dbg_disc, vha, 0x206c, |
| 3874 | "%s *** FAILED ***.\n", __func__); |
| 3875 | |
| 3876 | return (rval); |
| 3877 | } |
| 3878 | |
| 3879 | /* |
| 3880 | * qla2x00_perform_loop_resync |
| 3881 | * Description: This function will set the appropriate flags and call |
| 3882 | * qla2x00_loop_resync. If successful loop will be resynced |
| 3883 | * Arguments : scsi_qla_host_t pointer |
| 3884 | * returm : Success or Failure |
| 3885 | */ |
| 3886 | |
| 3887 | int qla2x00_perform_loop_resync(scsi_qla_host_t *ha) |
| 3888 | { |
| 3889 | int32_t rval = 0; |
| 3890 | |
| 3891 | if (!test_and_set_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags)) { |
| 3892 | /*Configure the flags so that resync happens properly*/ |
| 3893 | atomic_set(&ha->loop_down_timer, 0); |
| 3894 | if (!(ha->device_flags & DFLG_NO_CABLE)) { |
| 3895 | atomic_set(&ha->loop_state, LOOP_UP); |
| 3896 | set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags); |
| 3897 | set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags); |
| 3898 | set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); |
| 3899 | |
| 3900 | rval = qla2x00_loop_resync(ha); |
| 3901 | } else |
| 3902 | atomic_set(&ha->loop_state, LOOP_DEAD); |
| 3903 | |
| 3904 | clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags); |
| 3905 | } |
| 3906 | |
| 3907 | return rval; |
| 3908 | } |
| 3909 | |
| 3910 | void |
| 3911 | qla2x00_update_fcports(scsi_qla_host_t *base_vha) |
| 3912 | { |
| 3913 | fc_port_t *fcport; |
| 3914 | struct scsi_qla_host *vha; |
| 3915 | struct qla_hw_data *ha = base_vha->hw; |
| 3916 | unsigned long flags; |
| 3917 | |
| 3918 | spin_lock_irqsave(&ha->vport_slock, flags); |
| 3919 | /* Go with deferred removal of rport references. */ |
| 3920 | list_for_each_entry(vha, &base_vha->hw->vp_list, list) { |
| 3921 | atomic_inc(&vha->vref_count); |
| 3922 | list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| 3923 | if (fcport->drport && |
| 3924 | atomic_read(&fcport->state) != FCS_UNCONFIGURED) { |
| 3925 | spin_unlock_irqrestore(&ha->vport_slock, flags); |
| 3926 | |
| 3927 | qla2x00_rport_del(fcport); |
| 3928 | |
| 3929 | spin_lock_irqsave(&ha->vport_slock, flags); |
| 3930 | } |
| 3931 | } |
| 3932 | atomic_dec(&vha->vref_count); |
| 3933 | } |
| 3934 | spin_unlock_irqrestore(&ha->vport_slock, flags); |
| 3935 | } |
| 3936 | |
| 3937 | /* |
| 3938 | * qla82xx_quiescent_state_cleanup |
| 3939 | * Description: This function will block the new I/Os |
| 3940 | * Its not aborting any I/Os as context |
| 3941 | * is not destroyed during quiescence |
| 3942 | * Arguments: scsi_qla_host_t |
| 3943 | * return : void |
| 3944 | */ |
| 3945 | void |
| 3946 | qla82xx_quiescent_state_cleanup(scsi_qla_host_t *vha) |
| 3947 | { |
| 3948 | struct qla_hw_data *ha = vha->hw; |
| 3949 | struct scsi_qla_host *vp; |
| 3950 | |
| 3951 | ql_dbg(ql_dbg_p3p, vha, 0xb002, |
| 3952 | "Performing ISP error recovery - ha=%p.\n", ha); |
| 3953 | |
| 3954 | atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); |
| 3955 | if (atomic_read(&vha->loop_state) != LOOP_DOWN) { |
| 3956 | atomic_set(&vha->loop_state, LOOP_DOWN); |
| 3957 | qla2x00_mark_all_devices_lost(vha, 0); |
| 3958 | list_for_each_entry(vp, &ha->vp_list, list) |
| 3959 | qla2x00_mark_all_devices_lost(vha, 0); |
| 3960 | } else { |
| 3961 | if (!atomic_read(&vha->loop_down_timer)) |
| 3962 | atomic_set(&vha->loop_down_timer, |
| 3963 | LOOP_DOWN_TIME); |
| 3964 | } |
| 3965 | /* Wait for pending cmds to complete */ |
| 3966 | qla2x00_eh_wait_for_pending_commands(vha, 0, 0, WAIT_HOST); |
| 3967 | } |
| 3968 | |
| 3969 | void |
| 3970 | qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha) |
| 3971 | { |
| 3972 | struct qla_hw_data *ha = vha->hw; |
| 3973 | struct scsi_qla_host *vp; |
| 3974 | unsigned long flags; |
| 3975 | fc_port_t *fcport; |
| 3976 | |
| 3977 | /* For ISP82XX, driver waits for completion of the commands. |
| 3978 | * online flag should be set. |
| 3979 | */ |
| 3980 | if (!IS_QLA82XX(ha)) |
| 3981 | vha->flags.online = 0; |
| 3982 | ha->flags.chip_reset_done = 0; |
| 3983 | clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); |
| 3984 | ha->qla_stats.total_isp_aborts++; |
| 3985 | |
| 3986 | ql_log(ql_log_info, vha, 0x00af, |
| 3987 | "Performing ISP error recovery - ha=%p.\n", ha); |
| 3988 | |
| 3989 | /* For ISP82XX, reset_chip is just disabling interrupts. |
| 3990 | * Driver waits for the completion of the commands. |
| 3991 | * the interrupts need to be enabled. |
| 3992 | */ |
| 3993 | if (!IS_QLA82XX(ha)) |
| 3994 | ha->isp_ops->reset_chip(vha); |
| 3995 | |
| 3996 | atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); |
| 3997 | if (atomic_read(&vha->loop_state) != LOOP_DOWN) { |
| 3998 | atomic_set(&vha->loop_state, LOOP_DOWN); |
| 3999 | qla2x00_mark_all_devices_lost(vha, 0); |
| 4000 | |
| 4001 | spin_lock_irqsave(&ha->vport_slock, flags); |
| 4002 | list_for_each_entry(vp, &ha->vp_list, list) { |
| 4003 | atomic_inc(&vp->vref_count); |
| 4004 | spin_unlock_irqrestore(&ha->vport_slock, flags); |
| 4005 | |
| 4006 | qla2x00_mark_all_devices_lost(vp, 0); |
| 4007 | |
| 4008 | spin_lock_irqsave(&ha->vport_slock, flags); |
| 4009 | atomic_dec(&vp->vref_count); |
| 4010 | } |
| 4011 | spin_unlock_irqrestore(&ha->vport_slock, flags); |
| 4012 | } else { |
| 4013 | if (!atomic_read(&vha->loop_down_timer)) |
| 4014 | atomic_set(&vha->loop_down_timer, |
| 4015 | LOOP_DOWN_TIME); |
| 4016 | } |
| 4017 | |
| 4018 | /* Clear all async request states across all VPs. */ |
| 4019 | list_for_each_entry(fcport, &vha->vp_fcports, list) |
| 4020 | fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT); |
| 4021 | spin_lock_irqsave(&ha->vport_slock, flags); |
| 4022 | list_for_each_entry(vp, &ha->vp_list, list) { |
| 4023 | atomic_inc(&vp->vref_count); |
| 4024 | spin_unlock_irqrestore(&ha->vport_slock, flags); |
| 4025 | |
| 4026 | list_for_each_entry(fcport, &vp->vp_fcports, list) |
| 4027 | fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT); |
| 4028 | |
| 4029 | spin_lock_irqsave(&ha->vport_slock, flags); |
| 4030 | atomic_dec(&vp->vref_count); |
| 4031 | } |
| 4032 | spin_unlock_irqrestore(&ha->vport_slock, flags); |
| 4033 | |
| 4034 | if (!ha->flags.eeh_busy) { |
| 4035 | /* Make sure for ISP 82XX IO DMA is complete */ |
| 4036 | if (IS_QLA82XX(ha)) { |
| 4037 | qla82xx_chip_reset_cleanup(vha); |
| 4038 | ql_log(ql_log_info, vha, 0x00b4, |
| 4039 | "Done chip reset cleanup.\n"); |
| 4040 | |
| 4041 | /* Done waiting for pending commands. |
| 4042 | * Reset the online flag. |
| 4043 | */ |
| 4044 | vha->flags.online = 0; |
| 4045 | } |
| 4046 | |
| 4047 | /* Requeue all commands in outstanding command list. */ |
| 4048 | qla2x00_abort_all_cmds(vha, DID_RESET << 16); |
| 4049 | } |
| 4050 | } |
| 4051 | |
| 4052 | /* |
| 4053 | * qla2x00_abort_isp |
| 4054 | * Resets ISP and aborts all outstanding commands. |
| 4055 | * |
| 4056 | * Input: |
| 4057 | * ha = adapter block pointer. |
| 4058 | * |
| 4059 | * Returns: |
| 4060 | * 0 = success |
| 4061 | */ |
| 4062 | int |
| 4063 | qla2x00_abort_isp(scsi_qla_host_t *vha) |
| 4064 | { |
| 4065 | int rval; |
| 4066 | uint8_t status = 0; |
| 4067 | struct qla_hw_data *ha = vha->hw; |
| 4068 | struct scsi_qla_host *vp; |
| 4069 | struct req_que *req = ha->req_q_map[0]; |
| 4070 | unsigned long flags; |
| 4071 | |
| 4072 | if (vha->flags.online) { |
| 4073 | qla2x00_abort_isp_cleanup(vha); |
| 4074 | |
| 4075 | if (unlikely(pci_channel_offline(ha->pdev) && |
| 4076 | ha->flags.pci_channel_io_perm_failure)) { |
| 4077 | clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); |
| 4078 | status = 0; |
| 4079 | return status; |
| 4080 | } |
| 4081 | |
| 4082 | ha->isp_ops->get_flash_version(vha, req->ring); |
| 4083 | |
| 4084 | ha->isp_ops->nvram_config(vha); |
| 4085 | |
| 4086 | if (!qla2x00_restart_isp(vha)) { |
| 4087 | clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); |
| 4088 | |
| 4089 | if (!atomic_read(&vha->loop_down_timer)) { |
| 4090 | /* |
| 4091 | * Issue marker command only when we are going |
| 4092 | * to start the I/O . |
| 4093 | */ |
| 4094 | vha->marker_needed = 1; |
| 4095 | } |
| 4096 | |
| 4097 | vha->flags.online = 1; |
| 4098 | |
| 4099 | ha->isp_ops->enable_intrs(ha); |
| 4100 | |
| 4101 | ha->isp_abort_cnt = 0; |
| 4102 | clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); |
| 4103 | |
| 4104 | if (IS_QLA81XX(ha)) |
| 4105 | qla2x00_get_fw_version(vha, |
| 4106 | &ha->fw_major_version, |
| 4107 | &ha->fw_minor_version, |
| 4108 | &ha->fw_subminor_version, |
| 4109 | &ha->fw_attributes, &ha->fw_memory_size, |
| 4110 | ha->mpi_version, &ha->mpi_capabilities, |
| 4111 | ha->phy_version); |
| 4112 | |
| 4113 | if (ha->fce) { |
| 4114 | ha->flags.fce_enabled = 1; |
| 4115 | memset(ha->fce, 0, |
| 4116 | fce_calc_size(ha->fce_bufs)); |
| 4117 | rval = qla2x00_enable_fce_trace(vha, |
| 4118 | ha->fce_dma, ha->fce_bufs, ha->fce_mb, |
| 4119 | &ha->fce_bufs); |
| 4120 | if (rval) { |
| 4121 | ql_log(ql_log_warn, vha, 0x8033, |
| 4122 | "Unable to reinitialize FCE " |
| 4123 | "(%d).\n", rval); |
| 4124 | ha->flags.fce_enabled = 0; |
| 4125 | } |
| 4126 | } |
| 4127 | |
| 4128 | if (ha->eft) { |
| 4129 | memset(ha->eft, 0, EFT_SIZE); |
| 4130 | rval = qla2x00_enable_eft_trace(vha, |
| 4131 | ha->eft_dma, EFT_NUM_BUFFERS); |
| 4132 | if (rval) { |
| 4133 | ql_log(ql_log_warn, vha, 0x8034, |
| 4134 | "Unable to reinitialize EFT " |
| 4135 | "(%d).\n", rval); |
| 4136 | } |
| 4137 | } |
| 4138 | } else { /* failed the ISP abort */ |
| 4139 | vha->flags.online = 1; |
| 4140 | if (test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { |
| 4141 | if (ha->isp_abort_cnt == 0) { |
| 4142 | ql_log(ql_log_fatal, vha, 0x8035, |
| 4143 | "ISP error recover failed - " |
| 4144 | "board disabled.\n"); |
| 4145 | /* |
| 4146 | * The next call disables the board |
| 4147 | * completely. |
| 4148 | */ |
| 4149 | ha->isp_ops->reset_adapter(vha); |
| 4150 | vha->flags.online = 0; |
| 4151 | clear_bit(ISP_ABORT_RETRY, |
| 4152 | &vha->dpc_flags); |
| 4153 | status = 0; |
| 4154 | } else { /* schedule another ISP abort */ |
| 4155 | ha->isp_abort_cnt--; |
| 4156 | ql_dbg(ql_dbg_taskm, vha, 0x8020, |
| 4157 | "ISP abort - retry remaining %d.\n", |
| 4158 | ha->isp_abort_cnt); |
| 4159 | status = 1; |
| 4160 | } |
| 4161 | } else { |
| 4162 | ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT; |
| 4163 | ql_dbg(ql_dbg_taskm, vha, 0x8021, |
| 4164 | "ISP error recovery - retrying (%d) " |
| 4165 | "more times.\n", ha->isp_abort_cnt); |
| 4166 | set_bit(ISP_ABORT_RETRY, &vha->dpc_flags); |
| 4167 | status = 1; |
| 4168 | } |
| 4169 | } |
| 4170 | |
| 4171 | } |
| 4172 | |
| 4173 | if (!status) { |
| 4174 | ql_dbg(ql_dbg_taskm, vha, 0x8022, "%s succeeded.\n", __func__); |
| 4175 | |
| 4176 | spin_lock_irqsave(&ha->vport_slock, flags); |
| 4177 | list_for_each_entry(vp, &ha->vp_list, list) { |
| 4178 | if (vp->vp_idx) { |
| 4179 | atomic_inc(&vp->vref_count); |
| 4180 | spin_unlock_irqrestore(&ha->vport_slock, flags); |
| 4181 | |
| 4182 | qla2x00_vp_abort_isp(vp); |
| 4183 | |
| 4184 | spin_lock_irqsave(&ha->vport_slock, flags); |
| 4185 | atomic_dec(&vp->vref_count); |
| 4186 | } |
| 4187 | } |
| 4188 | spin_unlock_irqrestore(&ha->vport_slock, flags); |
| 4189 | |
| 4190 | } else { |
| 4191 | ql_log(ql_log_warn, vha, 0x8023, "%s **** FAILED ****.\n"); |
| 4192 | } |
| 4193 | |
| 4194 | return(status); |
| 4195 | } |
| 4196 | |
| 4197 | /* |
| 4198 | * qla2x00_restart_isp |
| 4199 | * restarts the ISP after a reset |
| 4200 | * |
| 4201 | * Input: |
| 4202 | * ha = adapter block pointer. |
| 4203 | * |
| 4204 | * Returns: |
| 4205 | * 0 = success |
| 4206 | */ |
| 4207 | static int |
| 4208 | qla2x00_restart_isp(scsi_qla_host_t *vha) |
| 4209 | { |
| 4210 | int status = 0; |
| 4211 | uint32_t wait_time; |
| 4212 | struct qla_hw_data *ha = vha->hw; |
| 4213 | struct req_que *req = ha->req_q_map[0]; |
| 4214 | struct rsp_que *rsp = ha->rsp_q_map[0]; |
| 4215 | |
| 4216 | /* If firmware needs to be loaded */ |
| 4217 | if (qla2x00_isp_firmware(vha)) { |
| 4218 | vha->flags.online = 0; |
| 4219 | status = ha->isp_ops->chip_diag(vha); |
| 4220 | if (!status) |
| 4221 | status = qla2x00_setup_chip(vha); |
| 4222 | } |
| 4223 | |
| 4224 | if (!status && !(status = qla2x00_init_rings(vha))) { |
| 4225 | clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); |
| 4226 | ha->flags.chip_reset_done = 1; |
| 4227 | /* Initialize the queues in use */ |
| 4228 | qla25xx_init_queues(ha); |
| 4229 | |
| 4230 | status = qla2x00_fw_ready(vha); |
| 4231 | if (!status) { |
| 4232 | ql_dbg(ql_dbg_taskm, vha, 0x8031, |
| 4233 | "Start configure loop status = %d.\n", status); |
| 4234 | |
| 4235 | /* Issue a marker after FW becomes ready. */ |
| 4236 | qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL); |
| 4237 | |
| 4238 | vha->flags.online = 1; |
| 4239 | /* Wait at most MAX_TARGET RSCNs for a stable link. */ |
| 4240 | wait_time = 256; |
| 4241 | do { |
| 4242 | clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| 4243 | qla2x00_configure_loop(vha); |
| 4244 | wait_time--; |
| 4245 | } while (!atomic_read(&vha->loop_down_timer) && |
| 4246 | !(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) |
| 4247 | && wait_time && (test_bit(LOOP_RESYNC_NEEDED, |
| 4248 | &vha->dpc_flags))); |
| 4249 | } |
| 4250 | |
| 4251 | /* if no cable then assume it's good */ |
| 4252 | if ((vha->device_flags & DFLG_NO_CABLE)) |
| 4253 | status = 0; |
| 4254 | |
| 4255 | ql_dbg(ql_dbg_taskm, vha, 0x8032, |
| 4256 | "Configure loop done, status = 0x%x.\n", status); |
| 4257 | } |
| 4258 | return (status); |
| 4259 | } |
| 4260 | |
| 4261 | static int |
| 4262 | qla25xx_init_queues(struct qla_hw_data *ha) |
| 4263 | { |
| 4264 | struct rsp_que *rsp = NULL; |
| 4265 | struct req_que *req = NULL; |
| 4266 | struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); |
| 4267 | int ret = -1; |
| 4268 | int i; |
| 4269 | |
| 4270 | for (i = 1; i < ha->max_rsp_queues; i++) { |
| 4271 | rsp = ha->rsp_q_map[i]; |
| 4272 | if (rsp) { |
| 4273 | rsp->options &= ~BIT_0; |
| 4274 | ret = qla25xx_init_rsp_que(base_vha, rsp); |
| 4275 | if (ret != QLA_SUCCESS) |
| 4276 | ql_dbg(ql_dbg_init, base_vha, 0x00ff, |
| 4277 | "%s Rsp que: %d init failed.\n", |
| 4278 | __func__, rsp->id); |
| 4279 | else |
| 4280 | ql_dbg(ql_dbg_init, base_vha, 0x0100, |
| 4281 | "%s Rsp que: %d inited.\n", |
| 4282 | __func__, rsp->id); |
| 4283 | } |
| 4284 | } |
| 4285 | for (i = 1; i < ha->max_req_queues; i++) { |
| 4286 | req = ha->req_q_map[i]; |
| 4287 | if (req) { |
| 4288 | /* Clear outstanding commands array. */ |
| 4289 | req->options &= ~BIT_0; |
| 4290 | ret = qla25xx_init_req_que(base_vha, req); |
| 4291 | if (ret != QLA_SUCCESS) |
| 4292 | ql_dbg(ql_dbg_init, base_vha, 0x0101, |
| 4293 | "%s Req que: %d init failed.\n", |
| 4294 | __func__, req->id); |
| 4295 | else |
| 4296 | ql_dbg(ql_dbg_init, base_vha, 0x0102, |
| 4297 | "%s Req que: %d inited.\n", |
| 4298 | __func__, req->id); |
| 4299 | } |
| 4300 | } |
| 4301 | return ret; |
| 4302 | } |
| 4303 | |
| 4304 | /* |
| 4305 | * qla2x00_reset_adapter |
| 4306 | * Reset adapter. |
| 4307 | * |
| 4308 | * Input: |
| 4309 | * ha = adapter block pointer. |
| 4310 | */ |
| 4311 | void |
| 4312 | qla2x00_reset_adapter(scsi_qla_host_t *vha) |
| 4313 | { |
| 4314 | unsigned long flags = 0; |
| 4315 | struct qla_hw_data *ha = vha->hw; |
| 4316 | struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| 4317 | |
| 4318 | vha->flags.online = 0; |
| 4319 | ha->isp_ops->disable_intrs(ha); |
| 4320 | |
| 4321 | spin_lock_irqsave(&ha->hardware_lock, flags); |
| 4322 | WRT_REG_WORD(®->hccr, HCCR_RESET_RISC); |
| 4323 | RD_REG_WORD(®->hccr); /* PCI Posting. */ |
| 4324 | WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC); |
| 4325 | RD_REG_WORD(®->hccr); /* PCI Posting. */ |
| 4326 | spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| 4327 | } |
| 4328 | |
| 4329 | void |
| 4330 | qla24xx_reset_adapter(scsi_qla_host_t *vha) |
| 4331 | { |
| 4332 | unsigned long flags = 0; |
| 4333 | struct qla_hw_data *ha = vha->hw; |
| 4334 | struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; |
| 4335 | |
| 4336 | if (IS_QLA82XX(ha)) |
| 4337 | return; |
| 4338 | |
| 4339 | vha->flags.online = 0; |
| 4340 | ha->isp_ops->disable_intrs(ha); |
| 4341 | |
| 4342 | spin_lock_irqsave(&ha->hardware_lock, flags); |
| 4343 | WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_RESET); |
| 4344 | RD_REG_DWORD(®->hccr); |
| 4345 | WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE); |
| 4346 | RD_REG_DWORD(®->hccr); |
| 4347 | spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| 4348 | |
| 4349 | if (IS_NOPOLLING_TYPE(ha)) |
| 4350 | ha->isp_ops->enable_intrs(ha); |
| 4351 | } |
| 4352 | |
| 4353 | /* On sparc systems, obtain port and node WWN from firmware |
| 4354 | * properties. |
| 4355 | */ |
| 4356 | static void qla24xx_nvram_wwn_from_ofw(scsi_qla_host_t *vha, |
| 4357 | struct nvram_24xx *nv) |
| 4358 | { |
| 4359 | #ifdef CONFIG_SPARC |
| 4360 | struct qla_hw_data *ha = vha->hw; |
| 4361 | struct pci_dev *pdev = ha->pdev; |
| 4362 | struct device_node *dp = pci_device_to_OF_node(pdev); |
| 4363 | const u8 *val; |
| 4364 | int len; |
| 4365 | |
| 4366 | val = of_get_property(dp, "port-wwn", &len); |
| 4367 | if (val && len >= WWN_SIZE) |
| 4368 | memcpy(nv->port_name, val, WWN_SIZE); |
| 4369 | |
| 4370 | val = of_get_property(dp, "node-wwn", &len); |
| 4371 | if (val && len >= WWN_SIZE) |
| 4372 | memcpy(nv->node_name, val, WWN_SIZE); |
| 4373 | #endif |
| 4374 | } |
| 4375 | |
| 4376 | int |
| 4377 | qla24xx_nvram_config(scsi_qla_host_t *vha) |
| 4378 | { |
| 4379 | int rval; |
| 4380 | struct init_cb_24xx *icb; |
| 4381 | struct nvram_24xx *nv; |
| 4382 | uint32_t *dptr; |
| 4383 | uint8_t *dptr1, *dptr2; |
| 4384 | uint32_t chksum; |
| 4385 | uint16_t cnt; |
| 4386 | struct qla_hw_data *ha = vha->hw; |
| 4387 | |
| 4388 | rval = QLA_SUCCESS; |
| 4389 | icb = (struct init_cb_24xx *)ha->init_cb; |
| 4390 | nv = ha->nvram; |
| 4391 | |
| 4392 | /* Determine NVRAM starting address. */ |
| 4393 | if (ha->flags.port0) { |
| 4394 | ha->nvram_base = FA_NVRAM_FUNC0_ADDR; |
| 4395 | ha->vpd_base = FA_NVRAM_VPD0_ADDR; |
| 4396 | } else { |
| 4397 | ha->nvram_base = FA_NVRAM_FUNC1_ADDR; |
| 4398 | ha->vpd_base = FA_NVRAM_VPD1_ADDR; |
| 4399 | } |
| 4400 | ha->nvram_size = sizeof(struct nvram_24xx); |
| 4401 | ha->vpd_size = FA_NVRAM_VPD_SIZE; |
| 4402 | if (IS_QLA82XX(ha)) |
| 4403 | ha->vpd_size = FA_VPD_SIZE_82XX; |
| 4404 | |
| 4405 | /* Get VPD data into cache */ |
| 4406 | ha->vpd = ha->nvram + VPD_OFFSET; |
| 4407 | ha->isp_ops->read_nvram(vha, (uint8_t *)ha->vpd, |
| 4408 | ha->nvram_base - FA_NVRAM_FUNC0_ADDR, FA_NVRAM_VPD_SIZE * 4); |
| 4409 | |
| 4410 | /* Get NVRAM data into cache and calculate checksum. */ |
| 4411 | dptr = (uint32_t *)nv; |
| 4412 | ha->isp_ops->read_nvram(vha, (uint8_t *)dptr, ha->nvram_base, |
| 4413 | ha->nvram_size); |
| 4414 | for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++) |
| 4415 | chksum += le32_to_cpu(*dptr++); |
| 4416 | |
| 4417 | ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x006a, |
| 4418 | "Contents of NVRAM\n"); |
| 4419 | ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010d, |
| 4420 | (uint8_t *)nv, ha->nvram_size); |
| 4421 | |
| 4422 | /* Bad NVRAM data, set defaults parameters. */ |
| 4423 | if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P' |
| 4424 | || nv->id[3] != ' ' || |
| 4425 | nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) { |
| 4426 | /* Reset NVRAM data. */ |
| 4427 | ql_log(ql_log_warn, vha, 0x006b, |
| 4428 | "Inconisistent NVRAM detected: checksum=0x%x id=%c " |
| 4429 | "version=0x%x.\n", chksum, nv->id[0], nv->nvram_version); |
| 4430 | ql_log(ql_log_warn, vha, 0x006c, |
| 4431 | "Falling back to functioning (yet invalid -- WWPN) " |
| 4432 | "defaults.\n"); |
| 4433 | |
| 4434 | /* |
| 4435 | * Set default initialization control block. |
| 4436 | */ |
| 4437 | memset(nv, 0, ha->nvram_size); |
| 4438 | nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION); |
| 4439 | nv->version = __constant_cpu_to_le16(ICB_VERSION); |
| 4440 | nv->frame_payload_size = __constant_cpu_to_le16(2048); |
| 4441 | nv->execution_throttle = __constant_cpu_to_le16(0xFFFF); |
| 4442 | nv->exchange_count = __constant_cpu_to_le16(0); |
| 4443 | nv->hard_address = __constant_cpu_to_le16(124); |
| 4444 | nv->port_name[0] = 0x21; |
| 4445 | nv->port_name[1] = 0x00 + ha->port_no; |
| 4446 | nv->port_name[2] = 0x00; |
| 4447 | nv->port_name[3] = 0xe0; |
| 4448 | nv->port_name[4] = 0x8b; |
| 4449 | nv->port_name[5] = 0x1c; |
| 4450 | nv->port_name[6] = 0x55; |
| 4451 | nv->port_name[7] = 0x86; |
| 4452 | nv->node_name[0] = 0x20; |
| 4453 | nv->node_name[1] = 0x00; |
| 4454 | nv->node_name[2] = 0x00; |
| 4455 | nv->node_name[3] = 0xe0; |
| 4456 | nv->node_name[4] = 0x8b; |
| 4457 | nv->node_name[5] = 0x1c; |
| 4458 | nv->node_name[6] = 0x55; |
| 4459 | nv->node_name[7] = 0x86; |
| 4460 | qla24xx_nvram_wwn_from_ofw(vha, nv); |
| 4461 | nv->login_retry_count = __constant_cpu_to_le16(8); |
| 4462 | nv->interrupt_delay_timer = __constant_cpu_to_le16(0); |
| 4463 | nv->login_timeout = __constant_cpu_to_le16(0); |
| 4464 | nv->firmware_options_1 = |
| 4465 | __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1); |
| 4466 | nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4); |
| 4467 | nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12); |
| 4468 | nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13); |
| 4469 | nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10); |
| 4470 | nv->efi_parameters = __constant_cpu_to_le32(0); |
| 4471 | nv->reset_delay = 5; |
| 4472 | nv->max_luns_per_target = __constant_cpu_to_le16(128); |
| 4473 | nv->port_down_retry_count = __constant_cpu_to_le16(30); |
| 4474 | nv->link_down_timeout = __constant_cpu_to_le16(30); |
| 4475 | |
| 4476 | rval = 1; |
| 4477 | } |
| 4478 | |
| 4479 | /* Reset Initialization control block */ |
| 4480 | memset(icb, 0, ha->init_cb_size); |
| 4481 | |
| 4482 | /* Copy 1st segment. */ |
| 4483 | dptr1 = (uint8_t *)icb; |
| 4484 | dptr2 = (uint8_t *)&nv->version; |
| 4485 | cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version; |
| 4486 | while (cnt--) |
| 4487 | *dptr1++ = *dptr2++; |
| 4488 | |
| 4489 | icb->login_retry_count = nv->login_retry_count; |
| 4490 | icb->link_down_on_nos = nv->link_down_on_nos; |
| 4491 | |
| 4492 | /* Copy 2nd segment. */ |
| 4493 | dptr1 = (uint8_t *)&icb->interrupt_delay_timer; |
| 4494 | dptr2 = (uint8_t *)&nv->interrupt_delay_timer; |
| 4495 | cnt = (uint8_t *)&icb->reserved_3 - |
| 4496 | (uint8_t *)&icb->interrupt_delay_timer; |
| 4497 | while (cnt--) |
| 4498 | *dptr1++ = *dptr2++; |
| 4499 | |
| 4500 | /* |
| 4501 | * Setup driver NVRAM options. |
| 4502 | */ |
| 4503 | qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name), |
| 4504 | "QLA2462"); |
| 4505 | |
| 4506 | /* Use alternate WWN? */ |
| 4507 | if (nv->host_p & __constant_cpu_to_le32(BIT_15)) { |
| 4508 | memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE); |
| 4509 | memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE); |
| 4510 | } |
| 4511 | |
| 4512 | /* Prepare nodename */ |
| 4513 | if ((icb->firmware_options_1 & __constant_cpu_to_le32(BIT_14)) == 0) { |
| 4514 | /* |
| 4515 | * Firmware will apply the following mask if the nodename was |
| 4516 | * not provided. |
| 4517 | */ |
| 4518 | memcpy(icb->node_name, icb->port_name, WWN_SIZE); |
| 4519 | icb->node_name[0] &= 0xF0; |
| 4520 | } |
| 4521 | |
| 4522 | /* Set host adapter parameters. */ |
| 4523 | ha->flags.disable_risc_code_load = 0; |
| 4524 | ha->flags.enable_lip_reset = 0; |
| 4525 | ha->flags.enable_lip_full_login = |
| 4526 | le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0; |
| 4527 | ha->flags.enable_target_reset = |
| 4528 | le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0; |
| 4529 | ha->flags.enable_led_scheme = 0; |
| 4530 | ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0; |
| 4531 | |
| 4532 | ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) & |
| 4533 | (BIT_6 | BIT_5 | BIT_4)) >> 4; |
| 4534 | |
| 4535 | memcpy(ha->fw_seriallink_options24, nv->seriallink_options, |
| 4536 | sizeof(ha->fw_seriallink_options24)); |
| 4537 | |
| 4538 | /* save HBA serial number */ |
| 4539 | ha->serial0 = icb->port_name[5]; |
| 4540 | ha->serial1 = icb->port_name[6]; |
| 4541 | ha->serial2 = icb->port_name[7]; |
| 4542 | memcpy(vha->node_name, icb->node_name, WWN_SIZE); |
| 4543 | memcpy(vha->port_name, icb->port_name, WWN_SIZE); |
| 4544 | |
| 4545 | icb->execution_throttle = __constant_cpu_to_le16(0xFFFF); |
| 4546 | |
| 4547 | ha->retry_count = le16_to_cpu(nv->login_retry_count); |
| 4548 | |
| 4549 | /* Set minimum login_timeout to 4 seconds. */ |
| 4550 | if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout) |
| 4551 | nv->login_timeout = cpu_to_le16(ql2xlogintimeout); |
| 4552 | if (le16_to_cpu(nv->login_timeout) < 4) |
| 4553 | nv->login_timeout = __constant_cpu_to_le16(4); |
| 4554 | ha->login_timeout = le16_to_cpu(nv->login_timeout); |
| 4555 | icb->login_timeout = nv->login_timeout; |
| 4556 | |
| 4557 | /* Set minimum RATOV to 100 tenths of a second. */ |
| 4558 | ha->r_a_tov = 100; |
| 4559 | |
| 4560 | ha->loop_reset_delay = nv->reset_delay; |
| 4561 | |
| 4562 | /* Link Down Timeout = 0: |
| 4563 | * |
| 4564 | * When Port Down timer expires we will start returning |
| 4565 | * I/O's to OS with "DID_NO_CONNECT". |
| 4566 | * |
| 4567 | * Link Down Timeout != 0: |
| 4568 | * |
| 4569 | * The driver waits for the link to come up after link down |
| 4570 | * before returning I/Os to OS with "DID_NO_CONNECT". |
| 4571 | */ |
| 4572 | if (le16_to_cpu(nv->link_down_timeout) == 0) { |
| 4573 | ha->loop_down_abort_time = |
| 4574 | (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT); |
| 4575 | } else { |
| 4576 | ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout); |
| 4577 | ha->loop_down_abort_time = |
| 4578 | (LOOP_DOWN_TIME - ha->link_down_timeout); |
| 4579 | } |
| 4580 | |
| 4581 | /* Need enough time to try and get the port back. */ |
| 4582 | ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count); |
| 4583 | if (qlport_down_retry) |
| 4584 | ha->port_down_retry_count = qlport_down_retry; |
| 4585 | |
| 4586 | /* Set login_retry_count */ |
| 4587 | ha->login_retry_count = le16_to_cpu(nv->login_retry_count); |
| 4588 | if (ha->port_down_retry_count == |
| 4589 | le16_to_cpu(nv->port_down_retry_count) && |
| 4590 | ha->port_down_retry_count > 3) |
| 4591 | ha->login_retry_count = ha->port_down_retry_count; |
| 4592 | else if (ha->port_down_retry_count > (int)ha->login_retry_count) |
| 4593 | ha->login_retry_count = ha->port_down_retry_count; |
| 4594 | if (ql2xloginretrycount) |
| 4595 | ha->login_retry_count = ql2xloginretrycount; |
| 4596 | |
| 4597 | /* Enable ZIO. */ |
| 4598 | if (!vha->flags.init_done) { |
| 4599 | ha->zio_mode = le32_to_cpu(icb->firmware_options_2) & |
| 4600 | (BIT_3 | BIT_2 | BIT_1 | BIT_0); |
| 4601 | ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ? |
| 4602 | le16_to_cpu(icb->interrupt_delay_timer): 2; |
| 4603 | } |
| 4604 | icb->firmware_options_2 &= __constant_cpu_to_le32( |
| 4605 | ~(BIT_3 | BIT_2 | BIT_1 | BIT_0)); |
| 4606 | vha->flags.process_response_queue = 0; |
| 4607 | if (ha->zio_mode != QLA_ZIO_DISABLED) { |
| 4608 | ha->zio_mode = QLA_ZIO_MODE_6; |
| 4609 | |
| 4610 | ql_log(ql_log_info, vha, 0x006f, |
| 4611 | "ZIO mode %d enabled; timer delay (%d us).\n", |
| 4612 | ha->zio_mode, ha->zio_timer * 100); |
| 4613 | |
| 4614 | icb->firmware_options_2 |= cpu_to_le32( |
| 4615 | (uint32_t)ha->zio_mode); |
| 4616 | icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer); |
| 4617 | vha->flags.process_response_queue = 1; |
| 4618 | } |
| 4619 | |
| 4620 | if (rval) { |
| 4621 | ql_log(ql_log_warn, vha, 0x0070, |
| 4622 | "NVRAM configuration failed.\n"); |
| 4623 | } |
| 4624 | return (rval); |
| 4625 | } |
| 4626 | |
| 4627 | static int |
| 4628 | qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr, |
| 4629 | uint32_t faddr) |
| 4630 | { |
| 4631 | int rval = QLA_SUCCESS; |
| 4632 | int segments, fragment; |
| 4633 | uint32_t *dcode, dlen; |
| 4634 | uint32_t risc_addr; |
| 4635 | uint32_t risc_size; |
| 4636 | uint32_t i; |
| 4637 | struct qla_hw_data *ha = vha->hw; |
| 4638 | struct req_que *req = ha->req_q_map[0]; |
| 4639 | |
| 4640 | ql_dbg(ql_dbg_init, vha, 0x008b, |
| 4641 | "Loading firmware from flash (%x).\n", faddr); |
| 4642 | |
| 4643 | rval = QLA_SUCCESS; |
| 4644 | |
| 4645 | segments = FA_RISC_CODE_SEGMENTS; |
| 4646 | dcode = (uint32_t *)req->ring; |
| 4647 | *srisc_addr = 0; |
| 4648 | |
| 4649 | /* Validate firmware image by checking version. */ |
| 4650 | qla24xx_read_flash_data(vha, dcode, faddr + 4, 4); |
| 4651 | for (i = 0; i < 4; i++) |
| 4652 | dcode[i] = be32_to_cpu(dcode[i]); |
| 4653 | if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff && |
| 4654 | dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) || |
| 4655 | (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 && |
| 4656 | dcode[3] == 0)) { |
| 4657 | ql_log(ql_log_fatal, vha, 0x008c, |
| 4658 | "Unable to verify the integrity of flash firmware " |
| 4659 | "image.\n"); |
| 4660 | ql_log(ql_log_fatal, vha, 0x008d, |
| 4661 | "Firmware data: %08x %08x %08x %08x.\n", |
| 4662 | dcode[0], dcode[1], dcode[2], dcode[3]); |
| 4663 | |
| 4664 | return QLA_FUNCTION_FAILED; |
| 4665 | } |
| 4666 | |
| 4667 | while (segments && rval == QLA_SUCCESS) { |
| 4668 | /* Read segment's load information. */ |
| 4669 | qla24xx_read_flash_data(vha, dcode, faddr, 4); |
| 4670 | |
| 4671 | risc_addr = be32_to_cpu(dcode[2]); |
| 4672 | *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr; |
| 4673 | risc_size = be32_to_cpu(dcode[3]); |
| 4674 | |
| 4675 | fragment = 0; |
| 4676 | while (risc_size > 0 && rval == QLA_SUCCESS) { |
| 4677 | dlen = (uint32_t)(ha->fw_transfer_size >> 2); |
| 4678 | if (dlen > risc_size) |
| 4679 | dlen = risc_size; |
| 4680 | |
| 4681 | ql_dbg(ql_dbg_init, vha, 0x008e, |
| 4682 | "Loading risc segment@ risc addr %x " |
| 4683 | "number of dwords 0x%x offset 0x%x.\n", |
| 4684 | risc_addr, dlen, faddr); |
| 4685 | |
| 4686 | qla24xx_read_flash_data(vha, dcode, faddr, dlen); |
| 4687 | for (i = 0; i < dlen; i++) |
| 4688 | dcode[i] = swab32(dcode[i]); |
| 4689 | |
| 4690 | rval = qla2x00_load_ram(vha, req->dma, risc_addr, |
| 4691 | dlen); |
| 4692 | if (rval) { |
| 4693 | ql_log(ql_log_fatal, vha, 0x008f, |
| 4694 | "Failed to load segment %d of firmware.\n", |
| 4695 | fragment); |
| 4696 | break; |
| 4697 | } |
| 4698 | |
| 4699 | faddr += dlen; |
| 4700 | risc_addr += dlen; |
| 4701 | risc_size -= dlen; |
| 4702 | fragment++; |
| 4703 | } |
| 4704 | |
| 4705 | /* Next segment. */ |
| 4706 | segments--; |
| 4707 | } |
| 4708 | |
| 4709 | return rval; |
| 4710 | } |
| 4711 | |
| 4712 | #define QLA_FW_URL "ftp://ftp.qlogic.com/outgoing/linux/firmware/" |
| 4713 | |
| 4714 | int |
| 4715 | qla2x00_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) |
| 4716 | { |
| 4717 | int rval; |
| 4718 | int i, fragment; |
| 4719 | uint16_t *wcode, *fwcode; |
| 4720 | uint32_t risc_addr, risc_size, fwclen, wlen, *seg; |
| 4721 | struct fw_blob *blob; |
| 4722 | struct qla_hw_data *ha = vha->hw; |
| 4723 | struct req_que *req = ha->req_q_map[0]; |
| 4724 | |
| 4725 | /* Load firmware blob. */ |
| 4726 | blob = qla2x00_request_firmware(vha); |
| 4727 | if (!blob) { |
| 4728 | ql_log(ql_log_info, vha, 0x0083, |
| 4729 | "Fimware image unavailable.\n"); |
| 4730 | ql_log(ql_log_info, vha, 0x0084, |
| 4731 | "Firmware images can be retrieved from: "QLA_FW_URL ".\n"); |
| 4732 | return QLA_FUNCTION_FAILED; |
| 4733 | } |
| 4734 | |
| 4735 | rval = QLA_SUCCESS; |
| 4736 | |
| 4737 | wcode = (uint16_t *)req->ring; |
| 4738 | *srisc_addr = 0; |
| 4739 | fwcode = (uint16_t *)blob->fw->data; |
| 4740 | fwclen = 0; |
| 4741 | |
| 4742 | /* Validate firmware image by checking version. */ |
| 4743 | if (blob->fw->size < 8 * sizeof(uint16_t)) { |
| 4744 | ql_log(ql_log_fatal, vha, 0x0085, |
| 4745 | "Unable to verify integrity of firmware image (%Zd).\n", |
| 4746 | blob->fw->size); |
| 4747 | goto fail_fw_integrity; |
| 4748 | } |
| 4749 | for (i = 0; i < 4; i++) |
| 4750 | wcode[i] = be16_to_cpu(fwcode[i + 4]); |
| 4751 | if ((wcode[0] == 0xffff && wcode[1] == 0xffff && wcode[2] == 0xffff && |
| 4752 | wcode[3] == 0xffff) || (wcode[0] == 0 && wcode[1] == 0 && |
| 4753 | wcode[2] == 0 && wcode[3] == 0)) { |
| 4754 | ql_log(ql_log_fatal, vha, 0x0086, |
| 4755 | "Unable to verify integrity of firmware image.\n"); |
| 4756 | ql_log(ql_log_fatal, vha, 0x0087, |
| 4757 | "Firmware data: %04x %04x %04x %04x.\n", |
| 4758 | wcode[0], wcode[1], wcode[2], wcode[3]); |
| 4759 | goto fail_fw_integrity; |
| 4760 | } |
| 4761 | |
| 4762 | seg = blob->segs; |
| 4763 | while (*seg && rval == QLA_SUCCESS) { |
| 4764 | risc_addr = *seg; |
| 4765 | *srisc_addr = *srisc_addr == 0 ? *seg : *srisc_addr; |
| 4766 | risc_size = be16_to_cpu(fwcode[3]); |
| 4767 | |
| 4768 | /* Validate firmware image size. */ |
| 4769 | fwclen += risc_size * sizeof(uint16_t); |
| 4770 | if (blob->fw->size < fwclen) { |
| 4771 | ql_log(ql_log_fatal, vha, 0x0088, |
| 4772 | "Unable to verify integrity of firmware image " |
| 4773 | "(%Zd).\n", blob->fw->size); |
| 4774 | goto fail_fw_integrity; |
| 4775 | } |
| 4776 | |
| 4777 | fragment = 0; |
| 4778 | while (risc_size > 0 && rval == QLA_SUCCESS) { |
| 4779 | wlen = (uint16_t)(ha->fw_transfer_size >> 1); |
| 4780 | if (wlen > risc_size) |
| 4781 | wlen = risc_size; |
| 4782 | ql_dbg(ql_dbg_init, vha, 0x0089, |
| 4783 | "Loading risc segment@ risc addr %x number of " |
| 4784 | "words 0x%x.\n", risc_addr, wlen); |
| 4785 | |
| 4786 | for (i = 0; i < wlen; i++) |
| 4787 | wcode[i] = swab16(fwcode[i]); |
| 4788 | |
| 4789 | rval = qla2x00_load_ram(vha, req->dma, risc_addr, |
| 4790 | wlen); |
| 4791 | if (rval) { |
| 4792 | ql_log(ql_log_fatal, vha, 0x008a, |
| 4793 | "Failed to load segment %d of firmware.\n", |
| 4794 | fragment); |
| 4795 | break; |
| 4796 | } |
| 4797 | |
| 4798 | fwcode += wlen; |
| 4799 | risc_addr += wlen; |
| 4800 | risc_size -= wlen; |
| 4801 | fragment++; |
| 4802 | } |
| 4803 | |
| 4804 | /* Next segment. */ |
| 4805 | seg++; |
| 4806 | } |
| 4807 | return rval; |
| 4808 | |
| 4809 | fail_fw_integrity: |
| 4810 | return QLA_FUNCTION_FAILED; |
| 4811 | } |
| 4812 | |
| 4813 | static int |
| 4814 | qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr) |
| 4815 | { |
| 4816 | int rval; |
| 4817 | int segments, fragment; |
| 4818 | uint32_t *dcode, dlen; |
| 4819 | uint32_t risc_addr; |
| 4820 | uint32_t risc_size; |
| 4821 | uint32_t i; |
| 4822 | struct fw_blob *blob; |
| 4823 | uint32_t *fwcode, fwclen; |
| 4824 | struct qla_hw_data *ha = vha->hw; |
| 4825 | struct req_que *req = ha->req_q_map[0]; |
| 4826 | |
| 4827 | /* Load firmware blob. */ |
| 4828 | blob = qla2x00_request_firmware(vha); |
| 4829 | if (!blob) { |
| 4830 | ql_log(ql_log_warn, vha, 0x0090, |
| 4831 | "Fimware image unavailable.\n"); |
| 4832 | ql_log(ql_log_warn, vha, 0x0091, |
| 4833 | "Firmware images can be retrieved from: " |
| 4834 | QLA_FW_URL ".\n"); |
| 4835 | |
| 4836 | return QLA_FUNCTION_FAILED; |
| 4837 | } |
| 4838 | |
| 4839 | ql_log(ql_log_info, vha, 0x0092, |
| 4840 | "Loading via request-firmware.\n"); |
| 4841 | |
| 4842 | rval = QLA_SUCCESS; |
| 4843 | |
| 4844 | segments = FA_RISC_CODE_SEGMENTS; |
| 4845 | dcode = (uint32_t *)req->ring; |
| 4846 | *srisc_addr = 0; |
| 4847 | fwcode = (uint32_t *)blob->fw->data; |
| 4848 | fwclen = 0; |
| 4849 | |
| 4850 | /* Validate firmware image by checking version. */ |
| 4851 | if (blob->fw->size < 8 * sizeof(uint32_t)) { |
| 4852 | ql_log(ql_log_fatal, vha, 0x0093, |
| 4853 | "Unable to verify integrity of firmware image (%Zd).\n", |
| 4854 | blob->fw->size); |
| 4855 | goto fail_fw_integrity; |
| 4856 | } |
| 4857 | for (i = 0; i < 4; i++) |
| 4858 | dcode[i] = be32_to_cpu(fwcode[i + 4]); |
| 4859 | if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff && |
| 4860 | dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) || |
| 4861 | (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 && |
| 4862 | dcode[3] == 0)) { |
| 4863 | ql_log(ql_log_fatal, vha, 0x0094, |
| 4864 | "Unable to verify integrity of firmware image (%Zd).\n", |
| 4865 | blob->fw->size); |
| 4866 | ql_log(ql_log_fatal, vha, 0x0095, |
| 4867 | "Firmware data: %08x %08x %08x %08x.\n", |
| 4868 | dcode[0], dcode[1], dcode[2], dcode[3]); |
| 4869 | goto fail_fw_integrity; |
| 4870 | } |
| 4871 | |
| 4872 | while (segments && rval == QLA_SUCCESS) { |
| 4873 | risc_addr = be32_to_cpu(fwcode[2]); |
| 4874 | *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr; |
| 4875 | risc_size = be32_to_cpu(fwcode[3]); |
| 4876 | |
| 4877 | /* Validate firmware image size. */ |
| 4878 | fwclen += risc_size * sizeof(uint32_t); |
| 4879 | if (blob->fw->size < fwclen) { |
| 4880 | ql_log(ql_log_fatal, vha, 0x0096, |
| 4881 | "Unable to verify integrity of firmware image " |
| 4882 | "(%Zd).\n", blob->fw->size); |
| 4883 | |
| 4884 | goto fail_fw_integrity; |
| 4885 | } |
| 4886 | |
| 4887 | fragment = 0; |
| 4888 | while (risc_size > 0 && rval == QLA_SUCCESS) { |
| 4889 | dlen = (uint32_t)(ha->fw_transfer_size >> 2); |
| 4890 | if (dlen > risc_size) |
| 4891 | dlen = risc_size; |
| 4892 | |
| 4893 | ql_dbg(ql_dbg_init, vha, 0x0097, |
| 4894 | "Loading risc segment@ risc addr %x " |
| 4895 | "number of dwords 0x%x.\n", risc_addr, dlen); |
| 4896 | |
| 4897 | for (i = 0; i < dlen; i++) |
| 4898 | dcode[i] = swab32(fwcode[i]); |
| 4899 | |
| 4900 | rval = qla2x00_load_ram(vha, req->dma, risc_addr, |
| 4901 | dlen); |
| 4902 | if (rval) { |
| 4903 | ql_log(ql_log_fatal, vha, 0x0098, |
| 4904 | "Failed to load segment %d of firmware.\n", |
| 4905 | fragment); |
| 4906 | break; |
| 4907 | } |
| 4908 | |
| 4909 | fwcode += dlen; |
| 4910 | risc_addr += dlen; |
| 4911 | risc_size -= dlen; |
| 4912 | fragment++; |
| 4913 | } |
| 4914 | |
| 4915 | /* Next segment. */ |
| 4916 | segments--; |
| 4917 | } |
| 4918 | return rval; |
| 4919 | |
| 4920 | fail_fw_integrity: |
| 4921 | return QLA_FUNCTION_FAILED; |
| 4922 | } |
| 4923 | |
| 4924 | int |
| 4925 | qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) |
| 4926 | { |
| 4927 | int rval; |
| 4928 | |
| 4929 | if (ql2xfwloadbin == 1) |
| 4930 | return qla81xx_load_risc(vha, srisc_addr); |
| 4931 | |
| 4932 | /* |
| 4933 | * FW Load priority: |
| 4934 | * 1) Firmware via request-firmware interface (.bin file). |
| 4935 | * 2) Firmware residing in flash. |
| 4936 | */ |
| 4937 | rval = qla24xx_load_risc_blob(vha, srisc_addr); |
| 4938 | if (rval == QLA_SUCCESS) |
| 4939 | return rval; |
| 4940 | |
| 4941 | return qla24xx_load_risc_flash(vha, srisc_addr, |
| 4942 | vha->hw->flt_region_fw); |
| 4943 | } |
| 4944 | |
| 4945 | int |
| 4946 | qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) |
| 4947 | { |
| 4948 | int rval; |
| 4949 | struct qla_hw_data *ha = vha->hw; |
| 4950 | |
| 4951 | if (ql2xfwloadbin == 2) |
| 4952 | goto try_blob_fw; |
| 4953 | |
| 4954 | /* |
| 4955 | * FW Load priority: |
| 4956 | * 1) Firmware residing in flash. |
| 4957 | * 2) Firmware via request-firmware interface (.bin file). |
| 4958 | * 3) Golden-Firmware residing in flash -- limited operation. |
| 4959 | */ |
| 4960 | rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_fw); |
| 4961 | if (rval == QLA_SUCCESS) |
| 4962 | return rval; |
| 4963 | |
| 4964 | try_blob_fw: |
| 4965 | rval = qla24xx_load_risc_blob(vha, srisc_addr); |
| 4966 | if (rval == QLA_SUCCESS || !ha->flt_region_gold_fw) |
| 4967 | return rval; |
| 4968 | |
| 4969 | ql_log(ql_log_info, vha, 0x0099, |
| 4970 | "Attempting to fallback to golden firmware.\n"); |
| 4971 | rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_gold_fw); |
| 4972 | if (rval != QLA_SUCCESS) |
| 4973 | return rval; |
| 4974 | |
| 4975 | ql_log(ql_log_info, vha, 0x009a, "Update operational firmware.\n"); |
| 4976 | ha->flags.running_gold_fw = 1; |
| 4977 | |
| 4978 | return rval; |
| 4979 | } |
| 4980 | |
| 4981 | void |
| 4982 | qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha) |
| 4983 | { |
| 4984 | int ret, retries; |
| 4985 | struct qla_hw_data *ha = vha->hw; |
| 4986 | |
| 4987 | if (ha->flags.pci_channel_io_perm_failure) |
| 4988 | return; |
| 4989 | if (!IS_FWI2_CAPABLE(ha)) |
| 4990 | return; |
| 4991 | if (!ha->fw_major_version) |
| 4992 | return; |
| 4993 | |
| 4994 | ret = qla2x00_stop_firmware(vha); |
| 4995 | for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT && |
| 4996 | ret != QLA_INVALID_COMMAND && retries ; retries--) { |
| 4997 | ha->isp_ops->reset_chip(vha); |
| 4998 | if (ha->isp_ops->chip_diag(vha) != QLA_SUCCESS) |
| 4999 | continue; |
| 5000 | if (qla2x00_setup_chip(vha) != QLA_SUCCESS) |
| 5001 | continue; |
| 5002 | ql_log(ql_log_info, vha, 0x8015, |
| 5003 | "Attempting retry of stop-firmware command.\n"); |
| 5004 | ret = qla2x00_stop_firmware(vha); |
| 5005 | } |
| 5006 | } |
| 5007 | |
| 5008 | int |
| 5009 | qla24xx_configure_vhba(scsi_qla_host_t *vha) |
| 5010 | { |
| 5011 | int rval = QLA_SUCCESS; |
| 5012 | uint16_t mb[MAILBOX_REGISTER_COUNT]; |
| 5013 | struct qla_hw_data *ha = vha->hw; |
| 5014 | struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); |
| 5015 | struct req_que *req; |
| 5016 | struct rsp_que *rsp; |
| 5017 | |
| 5018 | if (!vha->vp_idx) |
| 5019 | return -EINVAL; |
| 5020 | |
| 5021 | rval = qla2x00_fw_ready(base_vha); |
| 5022 | if (ha->flags.cpu_affinity_enabled) |
| 5023 | req = ha->req_q_map[0]; |
| 5024 | else |
| 5025 | req = vha->req; |
| 5026 | rsp = req->rsp; |
| 5027 | |
| 5028 | if (rval == QLA_SUCCESS) { |
| 5029 | clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); |
| 5030 | qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL); |
| 5031 | } |
| 5032 | |
| 5033 | vha->flags.management_server_logged_in = 0; |
| 5034 | |
| 5035 | /* Login to SNS first */ |
| 5036 | ha->isp_ops->fabric_login(vha, NPH_SNS, 0xff, 0xff, 0xfc, mb, BIT_1); |
| 5037 | if (mb[0] != MBS_COMMAND_COMPLETE) { |
| 5038 | ql_dbg(ql_dbg_init, vha, 0x0103, |
| 5039 | "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x " |
| 5040 | "mb[6]=%x mb[7]=%x.\n", |
| 5041 | NPH_SNS, mb[0], mb[1], mb[2], mb[6], mb[7]); |
| 5042 | return (QLA_FUNCTION_FAILED); |
| 5043 | } |
| 5044 | |
| 5045 | atomic_set(&vha->loop_down_timer, 0); |
| 5046 | atomic_set(&vha->loop_state, LOOP_UP); |
| 5047 | set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| 5048 | set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); |
| 5049 | rval = qla2x00_loop_resync(base_vha); |
| 5050 | |
| 5051 | return rval; |
| 5052 | } |
| 5053 | |
| 5054 | /* 84XX Support **************************************************************/ |
| 5055 | |
| 5056 | static LIST_HEAD(qla_cs84xx_list); |
| 5057 | static DEFINE_MUTEX(qla_cs84xx_mutex); |
| 5058 | |
| 5059 | static struct qla_chip_state_84xx * |
| 5060 | qla84xx_get_chip(struct scsi_qla_host *vha) |
| 5061 | { |
| 5062 | struct qla_chip_state_84xx *cs84xx; |
| 5063 | struct qla_hw_data *ha = vha->hw; |
| 5064 | |
| 5065 | mutex_lock(&qla_cs84xx_mutex); |
| 5066 | |
| 5067 | /* Find any shared 84xx chip. */ |
| 5068 | list_for_each_entry(cs84xx, &qla_cs84xx_list, list) { |
| 5069 | if (cs84xx->bus == ha->pdev->bus) { |
| 5070 | kref_get(&cs84xx->kref); |
| 5071 | goto done; |
| 5072 | } |
| 5073 | } |
| 5074 | |
| 5075 | cs84xx = kzalloc(sizeof(*cs84xx), GFP_KERNEL); |
| 5076 | if (!cs84xx) |
| 5077 | goto done; |
| 5078 | |
| 5079 | kref_init(&cs84xx->kref); |
| 5080 | spin_lock_init(&cs84xx->access_lock); |
| 5081 | mutex_init(&cs84xx->fw_update_mutex); |
| 5082 | cs84xx->bus = ha->pdev->bus; |
| 5083 | |
| 5084 | list_add_tail(&cs84xx->list, &qla_cs84xx_list); |
| 5085 | done: |
| 5086 | mutex_unlock(&qla_cs84xx_mutex); |
| 5087 | return cs84xx; |
| 5088 | } |
| 5089 | |
| 5090 | static void |
| 5091 | __qla84xx_chip_release(struct kref *kref) |
| 5092 | { |
| 5093 | struct qla_chip_state_84xx *cs84xx = |
| 5094 | container_of(kref, struct qla_chip_state_84xx, kref); |
| 5095 | |
| 5096 | mutex_lock(&qla_cs84xx_mutex); |
| 5097 | list_del(&cs84xx->list); |
| 5098 | mutex_unlock(&qla_cs84xx_mutex); |
| 5099 | kfree(cs84xx); |
| 5100 | } |
| 5101 | |
| 5102 | void |
| 5103 | qla84xx_put_chip(struct scsi_qla_host *vha) |
| 5104 | { |
| 5105 | struct qla_hw_data *ha = vha->hw; |
| 5106 | if (ha->cs84xx) |
| 5107 | kref_put(&ha->cs84xx->kref, __qla84xx_chip_release); |
| 5108 | } |
| 5109 | |
| 5110 | static int |
| 5111 | qla84xx_init_chip(scsi_qla_host_t *vha) |
| 5112 | { |
| 5113 | int rval; |
| 5114 | uint16_t status[2]; |
| 5115 | struct qla_hw_data *ha = vha->hw; |
| 5116 | |
| 5117 | mutex_lock(&ha->cs84xx->fw_update_mutex); |
| 5118 | |
| 5119 | rval = qla84xx_verify_chip(vha, status); |
| 5120 | |
| 5121 | mutex_unlock(&ha->cs84xx->fw_update_mutex); |
| 5122 | |
| 5123 | return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED: |
| 5124 | QLA_SUCCESS; |
| 5125 | } |
| 5126 | |
| 5127 | /* 81XX Support **************************************************************/ |
| 5128 | |
| 5129 | int |
| 5130 | qla81xx_nvram_config(scsi_qla_host_t *vha) |
| 5131 | { |
| 5132 | int rval; |
| 5133 | struct init_cb_81xx *icb; |
| 5134 | struct nvram_81xx *nv; |
| 5135 | uint32_t *dptr; |
| 5136 | uint8_t *dptr1, *dptr2; |
| 5137 | uint32_t chksum; |
| 5138 | uint16_t cnt; |
| 5139 | struct qla_hw_data *ha = vha->hw; |
| 5140 | |
| 5141 | rval = QLA_SUCCESS; |
| 5142 | icb = (struct init_cb_81xx *)ha->init_cb; |
| 5143 | nv = ha->nvram; |
| 5144 | |
| 5145 | /* Determine NVRAM starting address. */ |
| 5146 | ha->nvram_size = sizeof(struct nvram_81xx); |
| 5147 | ha->vpd_size = FA_NVRAM_VPD_SIZE; |
| 5148 | |
| 5149 | /* Get VPD data into cache */ |
| 5150 | ha->vpd = ha->nvram + VPD_OFFSET; |
| 5151 | ha->isp_ops->read_optrom(vha, ha->vpd, ha->flt_region_vpd << 2, |
| 5152 | ha->vpd_size); |
| 5153 | |
| 5154 | /* Get NVRAM data into cache and calculate checksum. */ |
| 5155 | ha->isp_ops->read_optrom(vha, ha->nvram, ha->flt_region_nvram << 2, |
| 5156 | ha->nvram_size); |
| 5157 | dptr = (uint32_t *)nv; |
| 5158 | for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++) |
| 5159 | chksum += le32_to_cpu(*dptr++); |
| 5160 | |
| 5161 | ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x0111, |
| 5162 | "Contents of NVRAM:\n"); |
| 5163 | ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0112, |
| 5164 | (uint8_t *)nv, ha->nvram_size); |
| 5165 | |
| 5166 | /* Bad NVRAM data, set defaults parameters. */ |
| 5167 | if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P' |
| 5168 | || nv->id[3] != ' ' || |
| 5169 | nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) { |
| 5170 | /* Reset NVRAM data. */ |
| 5171 | ql_log(ql_log_info, vha, 0x0073, |
| 5172 | "Inconisistent NVRAM detected: checksum=0x%x id=%c " |
| 5173 | "version=0x%x.\n", chksum, nv->id[0], |
| 5174 | le16_to_cpu(nv->nvram_version)); |
| 5175 | ql_log(ql_log_info, vha, 0x0074, |
| 5176 | "Falling back to functioning (yet invalid -- WWPN) " |
| 5177 | "defaults.\n"); |
| 5178 | |
| 5179 | /* |
| 5180 | * Set default initialization control block. |
| 5181 | */ |
| 5182 | memset(nv, 0, ha->nvram_size); |
| 5183 | nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION); |
| 5184 | nv->version = __constant_cpu_to_le16(ICB_VERSION); |
| 5185 | nv->frame_payload_size = __constant_cpu_to_le16(2048); |
| 5186 | nv->execution_throttle = __constant_cpu_to_le16(0xFFFF); |
| 5187 | nv->exchange_count = __constant_cpu_to_le16(0); |
| 5188 | nv->port_name[0] = 0x21; |
| 5189 | nv->port_name[1] = 0x00 + ha->port_no; |
| 5190 | nv->port_name[2] = 0x00; |
| 5191 | nv->port_name[3] = 0xe0; |
| 5192 | nv->port_name[4] = 0x8b; |
| 5193 | nv->port_name[5] = 0x1c; |
| 5194 | nv->port_name[6] = 0x55; |
| 5195 | nv->port_name[7] = 0x86; |
| 5196 | nv->node_name[0] = 0x20; |
| 5197 | nv->node_name[1] = 0x00; |
| 5198 | nv->node_name[2] = 0x00; |
| 5199 | nv->node_name[3] = 0xe0; |
| 5200 | nv->node_name[4] = 0x8b; |
| 5201 | nv->node_name[5] = 0x1c; |
| 5202 | nv->node_name[6] = 0x55; |
| 5203 | nv->node_name[7] = 0x86; |
| 5204 | nv->login_retry_count = __constant_cpu_to_le16(8); |
| 5205 | nv->interrupt_delay_timer = __constant_cpu_to_le16(0); |
| 5206 | nv->login_timeout = __constant_cpu_to_le16(0); |
| 5207 | nv->firmware_options_1 = |
| 5208 | __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1); |
| 5209 | nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4); |
| 5210 | nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12); |
| 5211 | nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13); |
| 5212 | nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10); |
| 5213 | nv->efi_parameters = __constant_cpu_to_le32(0); |
| 5214 | nv->reset_delay = 5; |
| 5215 | nv->max_luns_per_target = __constant_cpu_to_le16(128); |
| 5216 | nv->port_down_retry_count = __constant_cpu_to_le16(30); |
| 5217 | nv->link_down_timeout = __constant_cpu_to_le16(30); |
| 5218 | nv->enode_mac[0] = 0x00; |
| 5219 | nv->enode_mac[1] = 0x02; |
| 5220 | nv->enode_mac[2] = 0x03; |
| 5221 | nv->enode_mac[3] = 0x04; |
| 5222 | nv->enode_mac[4] = 0x05; |
| 5223 | nv->enode_mac[5] = 0x06 + ha->port_no; |
| 5224 | |
| 5225 | rval = 1; |
| 5226 | } |
| 5227 | |
| 5228 | /* Reset Initialization control block */ |
| 5229 | memset(icb, 0, ha->init_cb_size); |
| 5230 | |
| 5231 | /* Copy 1st segment. */ |
| 5232 | dptr1 = (uint8_t *)icb; |
| 5233 | dptr2 = (uint8_t *)&nv->version; |
| 5234 | cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version; |
| 5235 | while (cnt--) |
| 5236 | *dptr1++ = *dptr2++; |
| 5237 | |
| 5238 | icb->login_retry_count = nv->login_retry_count; |
| 5239 | |
| 5240 | /* Copy 2nd segment. */ |
| 5241 | dptr1 = (uint8_t *)&icb->interrupt_delay_timer; |
| 5242 | dptr2 = (uint8_t *)&nv->interrupt_delay_timer; |
| 5243 | cnt = (uint8_t *)&icb->reserved_5 - |
| 5244 | (uint8_t *)&icb->interrupt_delay_timer; |
| 5245 | while (cnt--) |
| 5246 | *dptr1++ = *dptr2++; |
| 5247 | |
| 5248 | memcpy(icb->enode_mac, nv->enode_mac, sizeof(icb->enode_mac)); |
| 5249 | /* Some boards (with valid NVRAMs) still have NULL enode_mac!! */ |
| 5250 | if (!memcmp(icb->enode_mac, "\0\0\0\0\0\0", sizeof(icb->enode_mac))) { |
| 5251 | icb->enode_mac[0] = 0x01; |
| 5252 | icb->enode_mac[1] = 0x02; |
| 5253 | icb->enode_mac[2] = 0x03; |
| 5254 | icb->enode_mac[3] = 0x04; |
| 5255 | icb->enode_mac[4] = 0x05; |
| 5256 | icb->enode_mac[5] = 0x06 + ha->port_no; |
| 5257 | } |
| 5258 | |
| 5259 | /* Use extended-initialization control block. */ |
| 5260 | memcpy(ha->ex_init_cb, &nv->ex_version, sizeof(*ha->ex_init_cb)); |
| 5261 | |
| 5262 | /* |
| 5263 | * Setup driver NVRAM options. |
| 5264 | */ |
| 5265 | qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name), |
| 5266 | "QLE8XXX"); |
| 5267 | |
| 5268 | /* Use alternate WWN? */ |
| 5269 | if (nv->host_p & __constant_cpu_to_le32(BIT_15)) { |
| 5270 | memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE); |
| 5271 | memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE); |
| 5272 | } |
| 5273 | |
| 5274 | /* Prepare nodename */ |
| 5275 | if ((icb->firmware_options_1 & __constant_cpu_to_le32(BIT_14)) == 0) { |
| 5276 | /* |
| 5277 | * Firmware will apply the following mask if the nodename was |
| 5278 | * not provided. |
| 5279 | */ |
| 5280 | memcpy(icb->node_name, icb->port_name, WWN_SIZE); |
| 5281 | icb->node_name[0] &= 0xF0; |
| 5282 | } |
| 5283 | |
| 5284 | /* Set host adapter parameters. */ |
| 5285 | ha->flags.disable_risc_code_load = 0; |
| 5286 | ha->flags.enable_lip_reset = 0; |
| 5287 | ha->flags.enable_lip_full_login = |
| 5288 | le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0; |
| 5289 | ha->flags.enable_target_reset = |
| 5290 | le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0; |
| 5291 | ha->flags.enable_led_scheme = 0; |
| 5292 | ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0; |
| 5293 | |
| 5294 | ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) & |
| 5295 | (BIT_6 | BIT_5 | BIT_4)) >> 4; |
| 5296 | |
| 5297 | /* save HBA serial number */ |
| 5298 | ha->serial0 = icb->port_name[5]; |
| 5299 | ha->serial1 = icb->port_name[6]; |
| 5300 | ha->serial2 = icb->port_name[7]; |
| 5301 | memcpy(vha->node_name, icb->node_name, WWN_SIZE); |
| 5302 | memcpy(vha->port_name, icb->port_name, WWN_SIZE); |
| 5303 | |
| 5304 | icb->execution_throttle = __constant_cpu_to_le16(0xFFFF); |
| 5305 | |
| 5306 | ha->retry_count = le16_to_cpu(nv->login_retry_count); |
| 5307 | |
| 5308 | /* Set minimum login_timeout to 4 seconds. */ |
| 5309 | if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout) |
| 5310 | nv->login_timeout = cpu_to_le16(ql2xlogintimeout); |
| 5311 | if (le16_to_cpu(nv->login_timeout) < 4) |
| 5312 | nv->login_timeout = __constant_cpu_to_le16(4); |
| 5313 | ha->login_timeout = le16_to_cpu(nv->login_timeout); |
| 5314 | icb->login_timeout = nv->login_timeout; |
| 5315 | |
| 5316 | /* Set minimum RATOV to 100 tenths of a second. */ |
| 5317 | ha->r_a_tov = 100; |
| 5318 | |
| 5319 | ha->loop_reset_delay = nv->reset_delay; |
| 5320 | |
| 5321 | /* Link Down Timeout = 0: |
| 5322 | * |
| 5323 | * When Port Down timer expires we will start returning |
| 5324 | * I/O's to OS with "DID_NO_CONNECT". |
| 5325 | * |
| 5326 | * Link Down Timeout != 0: |
| 5327 | * |
| 5328 | * The driver waits for the link to come up after link down |
| 5329 | * before returning I/Os to OS with "DID_NO_CONNECT". |
| 5330 | */ |
| 5331 | if (le16_to_cpu(nv->link_down_timeout) == 0) { |
| 5332 | ha->loop_down_abort_time = |
| 5333 | (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT); |
| 5334 | } else { |
| 5335 | ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout); |
| 5336 | ha->loop_down_abort_time = |
| 5337 | (LOOP_DOWN_TIME - ha->link_down_timeout); |
| 5338 | } |
| 5339 | |
| 5340 | /* Need enough time to try and get the port back. */ |
| 5341 | ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count); |
| 5342 | if (qlport_down_retry) |
| 5343 | ha->port_down_retry_count = qlport_down_retry; |
| 5344 | |
| 5345 | /* Set login_retry_count */ |
| 5346 | ha->login_retry_count = le16_to_cpu(nv->login_retry_count); |
| 5347 | if (ha->port_down_retry_count == |
| 5348 | le16_to_cpu(nv->port_down_retry_count) && |
| 5349 | ha->port_down_retry_count > 3) |
| 5350 | ha->login_retry_count = ha->port_down_retry_count; |
| 5351 | else if (ha->port_down_retry_count > (int)ha->login_retry_count) |
| 5352 | ha->login_retry_count = ha->port_down_retry_count; |
| 5353 | if (ql2xloginretrycount) |
| 5354 | ha->login_retry_count = ql2xloginretrycount; |
| 5355 | |
| 5356 | /* Enable ZIO. */ |
| 5357 | if (!vha->flags.init_done) { |
| 5358 | ha->zio_mode = le32_to_cpu(icb->firmware_options_2) & |
| 5359 | (BIT_3 | BIT_2 | BIT_1 | BIT_0); |
| 5360 | ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ? |
| 5361 | le16_to_cpu(icb->interrupt_delay_timer): 2; |
| 5362 | } |
| 5363 | icb->firmware_options_2 &= __constant_cpu_to_le32( |
| 5364 | ~(BIT_3 | BIT_2 | BIT_1 | BIT_0)); |
| 5365 | vha->flags.process_response_queue = 0; |
| 5366 | if (ha->zio_mode != QLA_ZIO_DISABLED) { |
| 5367 | ha->zio_mode = QLA_ZIO_MODE_6; |
| 5368 | |
| 5369 | ql_log(ql_log_info, vha, 0x0075, |
| 5370 | "ZIO mode %d enabled; timer delay (%d us).\n", |
| 5371 | ha->zio_mode, |
| 5372 | ha->zio_timer * 100); |
| 5373 | |
| 5374 | icb->firmware_options_2 |= cpu_to_le32( |
| 5375 | (uint32_t)ha->zio_mode); |
| 5376 | icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer); |
| 5377 | vha->flags.process_response_queue = 1; |
| 5378 | } |
| 5379 | |
| 5380 | if (rval) { |
| 5381 | ql_log(ql_log_warn, vha, 0x0076, |
| 5382 | "NVRAM configuration failed.\n"); |
| 5383 | } |
| 5384 | return (rval); |
| 5385 | } |
| 5386 | |
| 5387 | int |
| 5388 | qla82xx_restart_isp(scsi_qla_host_t *vha) |
| 5389 | { |
| 5390 | int status, rval; |
| 5391 | uint32_t wait_time; |
| 5392 | struct qla_hw_data *ha = vha->hw; |
| 5393 | struct req_que *req = ha->req_q_map[0]; |
| 5394 | struct rsp_que *rsp = ha->rsp_q_map[0]; |
| 5395 | struct scsi_qla_host *vp; |
| 5396 | unsigned long flags; |
| 5397 | |
| 5398 | status = qla2x00_init_rings(vha); |
| 5399 | if (!status) { |
| 5400 | clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); |
| 5401 | ha->flags.chip_reset_done = 1; |
| 5402 | |
| 5403 | status = qla2x00_fw_ready(vha); |
| 5404 | if (!status) { |
| 5405 | ql_log(ql_log_info, vha, 0x803c, |
| 5406 | "Start configure loop, status =%d.\n", status); |
| 5407 | |
| 5408 | /* Issue a marker after FW becomes ready. */ |
| 5409 | qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL); |
| 5410 | |
| 5411 | vha->flags.online = 1; |
| 5412 | /* Wait at most MAX_TARGET RSCNs for a stable link. */ |
| 5413 | wait_time = 256; |
| 5414 | do { |
| 5415 | clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| 5416 | qla2x00_configure_loop(vha); |
| 5417 | wait_time--; |
| 5418 | } while (!atomic_read(&vha->loop_down_timer) && |
| 5419 | !(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) && |
| 5420 | wait_time && |
| 5421 | (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))); |
| 5422 | } |
| 5423 | |
| 5424 | /* if no cable then assume it's good */ |
| 5425 | if ((vha->device_flags & DFLG_NO_CABLE)) |
| 5426 | status = 0; |
| 5427 | |
| 5428 | ql_log(ql_log_info, vha, 0x803d, |
| 5429 | "Configure loop done, status = 0x%x.\n", status); |
| 5430 | } |
| 5431 | |
| 5432 | if (!status) { |
| 5433 | clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); |
| 5434 | |
| 5435 | if (!atomic_read(&vha->loop_down_timer)) { |
| 5436 | /* |
| 5437 | * Issue marker command only when we are going |
| 5438 | * to start the I/O . |
| 5439 | */ |
| 5440 | vha->marker_needed = 1; |
| 5441 | } |
| 5442 | |
| 5443 | vha->flags.online = 1; |
| 5444 | |
| 5445 | ha->isp_ops->enable_intrs(ha); |
| 5446 | |
| 5447 | ha->isp_abort_cnt = 0; |
| 5448 | clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); |
| 5449 | |
| 5450 | /* Update the firmware version */ |
| 5451 | status = qla82xx_check_md_needed(vha); |
| 5452 | |
| 5453 | if (ha->fce) { |
| 5454 | ha->flags.fce_enabled = 1; |
| 5455 | memset(ha->fce, 0, |
| 5456 | fce_calc_size(ha->fce_bufs)); |
| 5457 | rval = qla2x00_enable_fce_trace(vha, |
| 5458 | ha->fce_dma, ha->fce_bufs, ha->fce_mb, |
| 5459 | &ha->fce_bufs); |
| 5460 | if (rval) { |
| 5461 | ql_log(ql_log_warn, vha, 0x803e, |
| 5462 | "Unable to reinitialize FCE (%d).\n", |
| 5463 | rval); |
| 5464 | ha->flags.fce_enabled = 0; |
| 5465 | } |
| 5466 | } |
| 5467 | |
| 5468 | if (ha->eft) { |
| 5469 | memset(ha->eft, 0, EFT_SIZE); |
| 5470 | rval = qla2x00_enable_eft_trace(vha, |
| 5471 | ha->eft_dma, EFT_NUM_BUFFERS); |
| 5472 | if (rval) { |
| 5473 | ql_log(ql_log_warn, vha, 0x803f, |
| 5474 | "Unable to reinitialize EFT (%d).\n", |
| 5475 | rval); |
| 5476 | } |
| 5477 | } |
| 5478 | } |
| 5479 | |
| 5480 | if (!status) { |
| 5481 | ql_dbg(ql_dbg_taskm, vha, 0x8040, |
| 5482 | "qla82xx_restart_isp succeeded.\n"); |
| 5483 | |
| 5484 | spin_lock_irqsave(&ha->vport_slock, flags); |
| 5485 | list_for_each_entry(vp, &ha->vp_list, list) { |
| 5486 | if (vp->vp_idx) { |
| 5487 | atomic_inc(&vp->vref_count); |
| 5488 | spin_unlock_irqrestore(&ha->vport_slock, flags); |
| 5489 | |
| 5490 | qla2x00_vp_abort_isp(vp); |
| 5491 | |
| 5492 | spin_lock_irqsave(&ha->vport_slock, flags); |
| 5493 | atomic_dec(&vp->vref_count); |
| 5494 | } |
| 5495 | } |
| 5496 | spin_unlock_irqrestore(&ha->vport_slock, flags); |
| 5497 | |
| 5498 | } else { |
| 5499 | ql_log(ql_log_warn, vha, 0x8041, |
| 5500 | "qla82xx_restart_isp **** FAILED ****.\n"); |
| 5501 | } |
| 5502 | |
| 5503 | return status; |
| 5504 | } |
| 5505 | |
| 5506 | void |
| 5507 | qla81xx_update_fw_options(scsi_qla_host_t *vha) |
| 5508 | { |
| 5509 | struct qla_hw_data *ha = vha->hw; |
| 5510 | |
| 5511 | if (!ql2xetsenable) |
| 5512 | return; |
| 5513 | |
| 5514 | /* Enable ETS Burst. */ |
| 5515 | memset(ha->fw_options, 0, sizeof(ha->fw_options)); |
| 5516 | ha->fw_options[2] |= BIT_9; |
| 5517 | qla2x00_set_fw_options(vha, ha->fw_options); |
| 5518 | } |
| 5519 | |
| 5520 | /* |
| 5521 | * qla24xx_get_fcp_prio |
| 5522 | * Gets the fcp cmd priority value for the logged in port. |
| 5523 | * Looks for a match of the port descriptors within |
| 5524 | * each of the fcp prio config entries. If a match is found, |
| 5525 | * the tag (priority) value is returned. |
| 5526 | * |
| 5527 | * Input: |
| 5528 | * vha = scsi host structure pointer. |
| 5529 | * fcport = port structure pointer. |
| 5530 | * |
| 5531 | * Return: |
| 5532 | * non-zero (if found) |
| 5533 | * -1 (if not found) |
| 5534 | * |
| 5535 | * Context: |
| 5536 | * Kernel context |
| 5537 | */ |
| 5538 | static int |
| 5539 | qla24xx_get_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport) |
| 5540 | { |
| 5541 | int i, entries; |
| 5542 | uint8_t pid_match, wwn_match; |
| 5543 | int priority; |
| 5544 | uint32_t pid1, pid2; |
| 5545 | uint64_t wwn1, wwn2; |
| 5546 | struct qla_fcp_prio_entry *pri_entry; |
| 5547 | struct qla_hw_data *ha = vha->hw; |
| 5548 | |
| 5549 | if (!ha->fcp_prio_cfg || !ha->flags.fcp_prio_enabled) |
| 5550 | return -1; |
| 5551 | |
| 5552 | priority = -1; |
| 5553 | entries = ha->fcp_prio_cfg->num_entries; |
| 5554 | pri_entry = &ha->fcp_prio_cfg->entry[0]; |
| 5555 | |
| 5556 | for (i = 0; i < entries; i++) { |
| 5557 | pid_match = wwn_match = 0; |
| 5558 | |
| 5559 | if (!(pri_entry->flags & FCP_PRIO_ENTRY_VALID)) { |
| 5560 | pri_entry++; |
| 5561 | continue; |
| 5562 | } |
| 5563 | |
| 5564 | /* check source pid for a match */ |
| 5565 | if (pri_entry->flags & FCP_PRIO_ENTRY_SPID_VALID) { |
| 5566 | pid1 = pri_entry->src_pid & INVALID_PORT_ID; |
| 5567 | pid2 = vha->d_id.b24 & INVALID_PORT_ID; |
| 5568 | if (pid1 == INVALID_PORT_ID) |
| 5569 | pid_match++; |
| 5570 | else if (pid1 == pid2) |
| 5571 | pid_match++; |
| 5572 | } |
| 5573 | |
| 5574 | /* check destination pid for a match */ |
| 5575 | if (pri_entry->flags & FCP_PRIO_ENTRY_DPID_VALID) { |
| 5576 | pid1 = pri_entry->dst_pid & INVALID_PORT_ID; |
| 5577 | pid2 = fcport->d_id.b24 & INVALID_PORT_ID; |
| 5578 | if (pid1 == INVALID_PORT_ID) |
| 5579 | pid_match++; |
| 5580 | else if (pid1 == pid2) |
| 5581 | pid_match++; |
| 5582 | } |
| 5583 | |
| 5584 | /* check source WWN for a match */ |
| 5585 | if (pri_entry->flags & FCP_PRIO_ENTRY_SWWN_VALID) { |
| 5586 | wwn1 = wwn_to_u64(vha->port_name); |
| 5587 | wwn2 = wwn_to_u64(pri_entry->src_wwpn); |
| 5588 | if (wwn2 == (uint64_t)-1) |
| 5589 | wwn_match++; |
| 5590 | else if (wwn1 == wwn2) |
| 5591 | wwn_match++; |
| 5592 | } |
| 5593 | |
| 5594 | /* check destination WWN for a match */ |
| 5595 | if (pri_entry->flags & FCP_PRIO_ENTRY_DWWN_VALID) { |
| 5596 | wwn1 = wwn_to_u64(fcport->port_name); |
| 5597 | wwn2 = wwn_to_u64(pri_entry->dst_wwpn); |
| 5598 | if (wwn2 == (uint64_t)-1) |
| 5599 | wwn_match++; |
| 5600 | else if (wwn1 == wwn2) |
| 5601 | wwn_match++; |
| 5602 | } |
| 5603 | |
| 5604 | if (pid_match == 2 || wwn_match == 2) { |
| 5605 | /* Found a matching entry */ |
| 5606 | if (pri_entry->flags & FCP_PRIO_ENTRY_TAG_VALID) |
| 5607 | priority = pri_entry->tag; |
| 5608 | break; |
| 5609 | } |
| 5610 | |
| 5611 | pri_entry++; |
| 5612 | } |
| 5613 | |
| 5614 | return priority; |
| 5615 | } |
| 5616 | |
| 5617 | /* |
| 5618 | * qla24xx_update_fcport_fcp_prio |
| 5619 | * Activates fcp priority for the logged in fc port |
| 5620 | * |
| 5621 | * Input: |
| 5622 | * vha = scsi host structure pointer. |
| 5623 | * fcp = port structure pointer. |
| 5624 | * |
| 5625 | * Return: |
| 5626 | * QLA_SUCCESS or QLA_FUNCTION_FAILED |
| 5627 | * |
| 5628 | * Context: |
| 5629 | * Kernel context. |
| 5630 | */ |
| 5631 | int |
| 5632 | qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport) |
| 5633 | { |
| 5634 | int ret; |
| 5635 | int priority; |
| 5636 | uint16_t mb[5]; |
| 5637 | |
| 5638 | if (fcport->port_type != FCT_TARGET || |
| 5639 | fcport->loop_id == FC_NO_LOOP_ID) |
| 5640 | return QLA_FUNCTION_FAILED; |
| 5641 | |
| 5642 | priority = qla24xx_get_fcp_prio(vha, fcport); |
| 5643 | if (priority < 0) |
| 5644 | return QLA_FUNCTION_FAILED; |
| 5645 | |
| 5646 | ret = qla24xx_set_fcp_prio(vha, fcport->loop_id, priority, mb); |
| 5647 | if (ret == QLA_SUCCESS) |
| 5648 | fcport->fcp_prio = priority; |
| 5649 | else |
| 5650 | ql_dbg(ql_dbg_user, vha, 0x704f, |
| 5651 | "Unable to activate fcp priority, ret=0x%x.\n", ret); |
| 5652 | |
| 5653 | return ret; |
| 5654 | } |
| 5655 | |
| 5656 | /* |
| 5657 | * qla24xx_update_all_fcp_prio |
| 5658 | * Activates fcp priority for all the logged in ports |
| 5659 | * |
| 5660 | * Input: |
| 5661 | * ha = adapter block pointer. |
| 5662 | * |
| 5663 | * Return: |
| 5664 | * QLA_SUCCESS or QLA_FUNCTION_FAILED |
| 5665 | * |
| 5666 | * Context: |
| 5667 | * Kernel context. |
| 5668 | */ |
| 5669 | int |
| 5670 | qla24xx_update_all_fcp_prio(scsi_qla_host_t *vha) |
| 5671 | { |
| 5672 | int ret; |
| 5673 | fc_port_t *fcport; |
| 5674 | |
| 5675 | ret = QLA_FUNCTION_FAILED; |
| 5676 | /* We need to set priority for all logged in ports */ |
| 5677 | list_for_each_entry(fcport, &vha->vp_fcports, list) |
| 5678 | ret = qla24xx_update_fcport_fcp_prio(vha, fcport); |
| 5679 | |
| 5680 | return ret; |
| 5681 | } |