blob: 8b6e1ab62b485729dca126c8ab6a82671623d1fe [file] [log] [blame] [edit]
/*
* NetLabel Management Support
*
* This file defines the management functions for the NetLabel system. The
* NetLabel system manages static and dynamic label mappings for network
* protocols such as CIPSO and RIPSO.
*
* Author: Paul Moore <paul@paul-moore.com>
*
*/
/*
* (c) Copyright Hewlett-Packard Development Company, L.P., 2006
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
* the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef _NETLABEL_MGMT_H
#define _NETLABEL_MGMT_H
#include <net/netlabel.h>
#include <linux/atomic.h>
/*
* The following NetLabel payloads are supported by the management interface.
*
* o ADD:
* Sent by an application to add a domain mapping to the NetLabel system.
*
* Required attributes:
*
* NLBL_MGMT_A_DOMAIN
* NLBL_MGMT_A_PROTOCOL
*
* If IPv4 is specified the following attributes are required:
*
* NLBL_MGMT_A_IPV4ADDR
* NLBL_MGMT_A_IPV4MASK
*
* If IPv6 is specified the following attributes are required:
*
* NLBL_MGMT_A_IPV6ADDR
* NLBL_MGMT_A_IPV6MASK
*
* If using NETLBL_NLTYPE_CIPSOV4 the following attributes are required:
*
* NLBL_MGMT_A_CV4DOI
*
* If using NETLBL_NLTYPE_UNLABELED no other attributes are required.
*
* o REMOVE:
* Sent by an application to remove a domain mapping from the NetLabel
* system.
*
* Required attributes:
*
* NLBL_MGMT_A_DOMAIN
*
* o LISTALL:
* This message can be sent either from an application or by the kernel in
* response to an application generated LISTALL message. When sent by an
* application there is no payload and the NLM_F_DUMP flag should be set.
* The kernel should respond with a series of the following messages.
*
* Required attributes:
*
* NLBL_MGMT_A_DOMAIN
*
* If the IP address selectors are not used the following attribute is
* required:
*
* NLBL_MGMT_A_PROTOCOL
*
* If the IP address selectors are used then the following attritbute is
* required:
*
* NLBL_MGMT_A_SELECTORLIST
*
* If the mapping is using the NETLBL_NLTYPE_CIPSOV4 type then the following
* attributes are required:
*
* NLBL_MGMT_A_CV4DOI
*
* If the mapping is using the NETLBL_NLTYPE_UNLABELED type no other
* attributes are required.
*
* o ADDDEF:
* Sent by an application to set the default domain mapping for the NetLabel
* system.
*
* Required attributes:
*
* NLBL_MGMT_A_PROTOCOL
*
* If using NETLBL_NLTYPE_CIPSOV4 the following attributes are required:
*
* NLBL_MGMT_A_CV4DOI
*
* If using NETLBL_NLTYPE_UNLABELED no other attributes are required.
*
* o REMOVEDEF:
* Sent by an application to remove the default domain mapping from the
* NetLabel system, there is no payload.
*
* o LISTDEF:
* This message can be sent either from an application or by the kernel in
* response to an application generated LISTDEF message. When sent by an
* application there is no payload. On success the kernel should send a
* response using the following format.
*
* If the IP address selectors are not used the following attribute is
* required:
*
* NLBL_MGMT_A_PROTOCOL
*
* If the IP address selectors are used then the following attritbute is
* required:
*
* NLBL_MGMT_A_SELECTORLIST
*
* If the mapping is using the NETLBL_NLTYPE_CIPSOV4 type then the following
* attributes are required:
*
* NLBL_MGMT_A_CV4DOI
*
* If the mapping is using the NETLBL_NLTYPE_UNLABELED type no other
* attributes are required.
*
* o PROTOCOLS:
* Sent by an application to request a list of configured NetLabel protocols
* in the kernel. When sent by an application there is no payload and the
* NLM_F_DUMP flag should be set. The kernel should respond with a series of
* the following messages.
*
* Required attributes:
*
* NLBL_MGMT_A_PROTOCOL
*
* o VERSION:
* Sent by an application to request the NetLabel version. When sent by an
* application there is no payload. This message type is also used by the
* kernel to respond to an VERSION request.
*
* Required attributes:
*
* NLBL_MGMT_A_VERSION
*
*/
/* NetLabel Management commands */
enum {
NLBL_MGMT_C_UNSPEC,
NLBL_MGMT_C_ADD,
NLBL_MGMT_C_REMOVE,
NLBL_MGMT_C_LISTALL,
NLBL_MGMT_C_ADDDEF,
NLBL_MGMT_C_REMOVEDEF,
NLBL_MGMT_C_LISTDEF,
NLBL_MGMT_C_PROTOCOLS,
NLBL_MGMT_C_VERSION,
__NLBL_MGMT_C_MAX,
};
/* NetLabel Management attributes */
enum {
NLBL_MGMT_A_UNSPEC,
NLBL_MGMT_A_DOMAIN,
/* (NLA_NUL_STRING)
* the NULL terminated LSM domain string */
NLBL_MGMT_A_PROTOCOL,
/* (NLA_U32)
* the NetLabel protocol type (defined by NETLBL_NLTYPE_*) */
NLBL_MGMT_A_VERSION,
/* (NLA_U32)
* the NetLabel protocol version number (defined by
* NETLBL_PROTO_VERSION) */
NLBL_MGMT_A_CV4DOI,
/* (NLA_U32)
* the CIPSOv4 DOI value */
NLBL_MGMT_A_IPV6ADDR,
/* (NLA_BINARY, struct in6_addr)
* an IPv6 address */
NLBL_MGMT_A_IPV6MASK,
/* (NLA_BINARY, struct in6_addr)
* an IPv6 address mask */
NLBL_MGMT_A_IPV4ADDR,
/* (NLA_BINARY, struct in_addr)
* an IPv4 address */
NLBL_MGMT_A_IPV4MASK,
/* (NLA_BINARY, struct in_addr)
* and IPv4 address mask */
NLBL_MGMT_A_ADDRSELECTOR,
/* (NLA_NESTED)
* an IP address selector, must contain an address, mask, and protocol
* attribute plus any protocol specific attributes */
NLBL_MGMT_A_SELECTORLIST,
/* (NLA_NESTED)
* the selector list, there must be at least one
* NLBL_MGMT_A_ADDRSELECTOR attribute */
__NLBL_MGMT_A_MAX,
};
#define NLBL_MGMT_A_MAX (__NLBL_MGMT_A_MAX - 1)
/* NetLabel protocol functions */
int netlbl_mgmt_genl_init(void);
/* NetLabel configured protocol reference counter */
extern atomic_t netlabel_mgmt_protocount;
#endif