| This is the contents of some of the drivers/usb/serial/ files that had old |
| changelog comments. They were quite old, and out of date, and we don't keep |
| them anymore, so I've put them here, away from the source files, in case |
| people still care to see them. |
| |
| - Greg Kroah-Hartman <greg@kroah.com> October 20, 2005 |
| |
| ----------------------------------------------------------------------- |
| usb-serial.h Change Log comments: |
| |
| (03/26/2002) gkh |
| removed the port->tty check from port_paranoia_check() due to serial |
| consoles not having a tty device assigned to them. |
| |
| (12/03/2001) gkh |
| removed active from the port structure. |
| added documentation to the usb_serial_device_type structure |
| |
| (10/10/2001) gkh |
| added vendor and product to serial structure. Needed to determine device |
| owner when the device is disconnected. |
| |
| (05/30/2001) gkh |
| added sem to port structure and removed port_lock |
| |
| (10/05/2000) gkh |
| Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help |
| fix bug with urb->dev not being set properly, now that the usb core |
| needs it. |
| |
| (09/11/2000) gkh |
| Added usb_serial_debug_data function to help get rid of #DEBUG in the |
| drivers. |
| |
| (08/28/2000) gkh |
| Added port_lock to port structure. |
| |
| (08/08/2000) gkh |
| Added open_count to port structure. |
| |
| (07/23/2000) gkh |
| Added bulk_out_endpointAddress to port structure. |
| |
| (07/19/2000) gkh, pberger, and borchers |
| Modifications to allow usb-serial drivers to be modules. |
| |
| ----------------------------------------------------------------------- |
| usb-serial.c Change Log comments: |
| |
| (12/10/2002) gkh |
| Split the ports off into their own struct device, and added a |
| usb-serial bus driver. |
| |
| (11/19/2002) gkh |
| removed a few #ifdefs for the generic code and cleaned up the failure |
| logic in initialization. |
| |
| (10/02/2002) gkh |
| moved the console code to console.c and out of this file. |
| |
| (06/05/2002) gkh |
| moved location of startup() call in serial_probe() until after all |
| of the port information and endpoints are initialized. This makes |
| things easier for some drivers. |
| |
| (04/10/2002) gkh |
| added serial_read_proc function which creates a |
| /proc/tty/driver/usb-serial file. |
| |
| (03/27/2002) gkh |
| Got USB serial console code working properly and merged into the main |
| version of the tree. Thanks to Randy Dunlap for the initial version |
| of this code, and for pushing me to finish it up. |
| The USB serial console works with any usb serial driver device. |
| |
| (03/21/2002) gkh |
| Moved all manipulation of port->open_count into the core. Now the |
| individual driver's open and close functions are called only when the |
| first open() and last close() is called. Making the drivers a bit |
| smaller and simpler. |
| Fixed a bug if a driver didn't have the owner field set. |
| |
| (02/26/2002) gkh |
| Moved all locking into the main serial_* functions, instead of having |
| the individual drivers have to grab the port semaphore. This should |
| reduce races. |
| Reworked the MOD_INC logic a bit to always increment and decrement, even |
| if the generic driver is being used. |
| |
| (10/10/2001) gkh |
| usb_serial_disconnect() now sets the serial->dev pointer is to NULL to |
| help prevent child drivers from accessing the device since it is now |
| gone. |
| |
| (09/13/2001) gkh |
| Moved generic driver initialize after we have registered with the USB |
| core. Thanks to Randy Dunlap for pointing this problem out. |
| |
| (07/03/2001) gkh |
| Fixed module paramater size. Thanks to John Brockmeyer for the pointer. |
| Fixed vendor and product getting defined through the MODULE_PARM macro |
| if the Generic driver wasn't compiled in. |
| Fixed problem with generic_shutdown() not being called for drivers that |
| don't have a shutdown() function. |
| |
| (06/06/2001) gkh |
| added evil hack that is needed for the prolific pl2303 device due to the |
| crazy way its endpoints are set up. |
| |
| (05/30/2001) gkh |
| switched from using spinlock to a semaphore, which fixes lots of problems. |
| |
| (04/08/2001) gb |
| Identify version on module load. |
| |
| 2001_02_05 gkh |
| Fixed buffer overflows bug with the generic serial driver. Thanks to |
| Todd Squires <squirest@ct0.com> for fixing this. |
| |
| (01/10/2001) gkh |
| Fixed bug where the generic serial adaptor grabbed _any_ device that was |
| offered to it. |
| |
| (12/12/2000) gkh |
| Removed MOD_INC and MOD_DEC from poll and disconnect functions, and |
| moved them to the serial_open and serial_close functions. |
| Also fixed bug with there not being a MOD_DEC for the generic driver |
| (thanks to Gary Brubaker for finding this.) |
| |
| (11/29/2000) gkh |
| Small NULL pointer initialization cleanup which saves a bit of disk image |
| |
| (11/01/2000) Adam J. Richter |
| instead of using idVendor/idProduct pairs, usb serial drivers |
| now identify their hardware interest with usb_device_id tables, |
| which they usually have anyhow for use with MODULE_DEVICE_TABLE. |
| |
| (10/05/2000) gkh |
| Fixed bug with urb->dev not being set properly, now that the usb |
| core needs it. |
| |
| (09/11/2000) gkh |
| Removed DEBUG #ifdefs with call to usb_serial_debug_data |
| |
| (08/28/2000) gkh |
| Added port_lock to port structure. |
| Added locks for SMP safeness to generic driver |
| Fixed the ability to open a generic device's port more than once. |
| |
| (07/23/2000) gkh |
| Added bulk_out_endpointAddress to port structure. |
| |
| (07/19/2000) gkh, pberger, and borchers |
| Modifications to allow usb-serial drivers to be modules. |
| |
| (07/03/2000) gkh |
| Added more debugging to serial_ioctl call |
| |
| (06/25/2000) gkh |
| Changed generic_write_bulk_callback to not call wake_up_interruptible |
| directly, but to have port_softint do it at a safer time. |
| |
| (06/23/2000) gkh |
| Cleaned up debugging statements in a quest to find UHCI timeout bug. |
| |
| (05/22/2000) gkh |
| Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be |
| removed from the individual device source files. |
| |
| (05/03/2000) gkh |
| Added the Digi Acceleport driver from Al Borchers and Peter Berger. |
| |
| (05/02/2000) gkh |
| Changed devfs and tty register code to work properly now. This was based on |
| the ACM driver changes by Vojtech Pavlik. |
| |
| (04/27/2000) Ryan VanderBijl |
| Put calls to *_paranoia_checks into one function. |
| |
| (04/23/2000) gkh |
| Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports. |
| Moved when the startup code printed out the devices that are supported. |
| |
| (04/19/2000) gkh |
| Added driver for ZyXEL omni.net lcd plus ISDN TA |
| Made startup info message specify which drivers were compiled in. |
| |
| (04/03/2000) gkh |
| Changed the probe process to remove the module unload races. |
| Changed where the tty layer gets initialized to have devfs work nicer. |
| Added initial devfs support. |
| |
| (03/26/2000) gkh |
| Split driver up into device specific pieces. |
| |
| (03/19/2000) gkh |
| Fixed oops that could happen when device was removed while a program |
| was talking to the device. |
| Removed the static urbs and now all urbs are created and destroyed |
| dynamically. |
| Reworked the internal interface. Now everything is based on the |
| usb_serial_port structure instead of the larger usb_serial structure. |
| This fixes the bug that a multiport device could not have more than |
| one port open at one time. |
| |
| (03/17/2000) gkh |
| Added config option for debugging messages. |
| Added patch for keyspan pda from Brian Warner. |
| |
| (03/06/2000) gkh |
| Added the keyspan pda code from Brian Warner <warner@lothar.com> |
| Moved a bunch of the port specific stuff into its own structure. This |
| is in anticipation of the true multiport devices (there's a bug if you |
| try to access more than one port of any multiport device right now) |
| |
| (02/21/2000) gkh |
| Made it so that any serial devices only have to specify which functions |
| they want to overload from the generic function calls (great, |
| inheritance in C, in a driver, just what I wanted...) |
| Added support for set_termios and ioctl function calls. No drivers take |
| advantage of this yet. |
| Removed the #ifdef MODULE, now there is no module specific code. |
| Cleaned up a few comments in usb-serial.h that were wrong (thanks again |
| to Miles Lott). |
| Small fix to get_free_serial. |
| |
| (02/14/2000) gkh |
| Removed the Belkin and Peracom functionality from the driver due to |
| the lack of support from the vendor, and me not wanting people to |
| accidenatly buy the device, expecting it to work with Linux. |
| Added read_bulk_callback and write_bulk_callback to the type structure |
| for the needs of the FTDI and WhiteHEAT driver. |
| Changed all reverences to FTDI to FTDI_SIO at the request of Bill |
| Ryder. |
| Changed the output urb size back to the max endpoint size to make |
| the ftdi_sio driver have it easier, and due to the fact that it didn't |
| really increase the speed any. |
| |
| (02/11/2000) gkh |
| Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a |
| patch from Miles Lott (milos@insync.net). |
| Fixed bug with not restoring the minor range that a device grabs, if |
| the startup function fails (thanks Miles for finding this). |
| |
| (02/05/2000) gkh |
| Added initial framework for the Keyspan PDA serial converter so that |
| Brian Warner has a place to put his code. |
| Made the ezusb specific functions generic enough that different |
| devices can use them (whiteheat and keyspan_pda both need them). |
| Split out a whole bunch of structure and other stuff to a separate |
| usb-serial.h file. |
| Made the Visor connection messages a little more understandable, now |
| that Miles Lott (milos@insync.net) has gotten the Generic channel to |
| work. Also made them always show up in the log file. |
| |
| (01/25/2000) gkh |
| Added initial framework for FTDI serial converter so that Bill Ryder |
| has a place to put his code. |
| Added the vendor specific info from Handspring. Now we can print out |
| informational debug messages as well as understand what is happening. |
| |
| (01/23/2000) gkh |
| Fixed problem of crash when trying to open a port that didn't have a |
| device assigned to it. Made the minor node finding a little smarter, |
| now it looks to find a continuous space for the new device. |
| |
| (01/21/2000) gkh |
| Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net) |
| Fixed get_serial_by_minor which was all messed up for multi port |
| devices. Fixed multi port problem for generic devices. Now the number |
| of ports is determined by the number of bulk out endpoints for the |
| generic device. |
| |
| (01/19/2000) gkh |
| Removed lots of cruft that was around from the old (pre urb) driver |
| interface. |
| Made the serial_table dynamic. This should save lots of memory when |
| the number of minor nodes goes up to 256. |
| Added initial support for devices that have more than one port. |
| Added more debugging comments for the Visor, and added a needed |
| set_configuration call. |
| |
| (01/17/2000) gkh |
| Fixed the WhiteHEAT firmware (my processing tool had a bug) |
| and added new debug loader firmware for it. |
| Removed the put_char function as it isn't really needed. |
| Added visor startup commands as found by the Win98 dump. |
| |
| (01/13/2000) gkh |
| Fixed the vendor id for the generic driver to the one I meant it to be. |
| |
| (01/12/2000) gkh |
| Forget the version numbering...that's pretty useless... |
| Made the driver able to be compiled so that the user can select which |
| converter they want to use. This allows people who only want the Visor |
| support to not pay the memory size price of the WhiteHEAT. |
| Fixed bug where the generic driver (idVendor=0000 and idProduct=0000) |
| grabbed the root hub. Not good. |
| |
| version 0.4.0 (01/10/2000) gkh |
| Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT |
| device. Added startup function to allow firmware to be downloaded to |
| a device if it needs to be. |
| Added firmware download logic to the WhiteHEAT device. |
| Started to add #defines to split up the different drivers for potential |
| configuration option. |
| |
| version 0.3.1 (12/30/99) gkh |
| Fixed problems with urb for bulk out. |
| Added initial support for multiple sets of endpoints. This enables |
| the Handspring Visor to be attached successfully. Only the first |
| bulk in / bulk out endpoint pair is being used right now. |
| |
| version 0.3.0 (12/27/99) gkh |
| Added initial support for the Handspring Visor based on a patch from |
| Miles Lott (milos@sneety.insync.net) |
| Cleaned up the code a bunch and converted over to using urbs only. |
| |
| version 0.2.3 (12/21/99) gkh |
| Added initial support for the Connect Tech WhiteHEAT converter. |
| Incremented the number of ports in expectation of getting the |
| WhiteHEAT to work properly (4 ports per connection). |
| Added notification on insertion and removal of what port the |
| device is/was connected to (and what kind of device it was). |
| |
| version 0.2.2 (12/16/99) gkh |
| Changed major number to the new allocated number. We're legal now! |
| |
| version 0.2.1 (12/14/99) gkh |
| Fixed bug that happens when device node is opened when there isn't a |
| device attached to it. Thanks to marek@webdesign.no for noticing this. |
| |
| version 0.2.0 (11/10/99) gkh |
| Split up internals to make it easier to add different types of serial |
| converters to the code. |
| Added a "generic" driver that gets it's vendor and product id |
| from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net) |
| for the idea and sample code (from the usb scanner driver.) |
| Cleared up any licensing questions by releasing it under the GNU GPL. |
| |
| version 0.1.2 (10/25/99) gkh |
| Fixed bug in detecting device. |
| |
| version 0.1.1 (10/05/99) gkh |
| Changed the major number to not conflict with anything else. |
| |
| version 0.1 (09/28/99) gkh |
| Can recognize the two different devices and start up a read from |
| device when asked to. Writes also work. No control signals yet, this |
| all is vendor specific data (i.e. no spec), also no control for |
| different baud rates or other bit settings. |
| Currently we are using the same devid as the acm driver. This needs |
| to change. |
| |
| ----------------------------------------------------------------------- |
| visor.c Change Log comments: |
| |
| (06/03/2003) Judd Montgomery <judd at jpilot.org> |
| Added support for module parameter options for untested/unknown |
| devices. |
| |
| (03/09/2003) gkh |
| Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl |
| <brachtl@redgrep.cz> for the information. |
| |
| (03/05/2003) gkh |
| Think Treo support is now working. |
| |
| (04/03/2002) gkh |
| Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI |
| <hiro@zob.ne.jp> for the information. |
| |
| (03/27/2002) gkh |
| Removed assumptions that port->tty was always valid (is not true |
| for usb serial console devices.) |
| |
| (03/23/2002) gkh |
| Added support for the Palm i705 device, thanks to Thomas Riemer |
| <tom@netmech.com> for the information. |
| |
| (03/21/2002) gkh |
| Added support for the Palm m130 device, thanks to Udo Eisenbarth |
| <udo.eisenbarth@web.de> for the information. |
| |
| (02/27/2002) gkh |
| Reworked the urb handling logic. We have no more pool, but dynamically |
| allocate the urb and the transfer buffer on the fly. In testing this |
| does not incure any measurable overhead. This also relies on the fact |
| that we have proper reference counting logic for urbs. |
| |
| (02/21/2002) SilaS |
| Added initial support for the Palm m515 devices. |
| |
| (02/14/2002) gkh |
| Added support for the Clie S-360 device. |
| |
| (12/18/2001) gkh |
| Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand |
| for the patch. |
| |
| (11/11/2001) gkh |
| Added support for the m125 devices, and added check to prevent oopses |
| for Clié devices that lie about the number of ports they have. |
| |
| (08/30/2001) gkh |
| Added support for the Clie devices, both the 3.5 and 4.0 os versions. |
| Many thanks to Daniel Burke, and Bryan Payne for helping with this. |
| |
| (08/23/2001) gkh |
| fixed a few potential bugs pointed out by Oliver Neukum. |
| |
| (05/30/2001) gkh |
| switched from using spinlock to a semaphore, which fixes lots of problems. |
| |
| (05/28/2000) gkh |
| Added initial support for the Palm m500 and Palm m505 devices. |
| |
| (04/08/2001) gb |
| Identify version on module load. |
| |
| (01/21/2000) gkh |
| Added write_room and chars_in_buffer, as they were previously using the |
| generic driver versions which is all wrong now that we are using an urb |
| pool. Thanks to Wolfgang Grandegger for pointing this out to me. |
| Removed count assignment in the write function, which was not needed anymore |
| either. Thanks to Al Borchers for pointing this out. |
| |
| (12/12/2000) gkh |
| Moved MOD_DEC to end of visor_close to be nicer, as the final write |
| message can sleep. |
| |
| (11/12/2000) gkh |
| Fixed bug with data being dropped on the floor by forcing tty->low_latency |
| to be on. Hopefully this fixes the OHCI issue! |
| |
| (11/01/2000) Adam J. Richter |
| usb_device_id table support |
| |
| (10/05/2000) gkh |
| Fixed bug with urb->dev not being set properly, now that the usb |
| core needs it. |
| |
| (09/11/2000) gkh |
| Got rid of always calling kmalloc for every urb we wrote out to the |
| device. |
| Added visor_read_callback so we can keep track of bytes in and out for |
| those people who like to know the speed of their device. |
| Removed DEBUG #ifdefs with call to usb_serial_debug_data |
| |
| (09/06/2000) gkh |
| Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ |
| the host controller drivers set urb->dev = NULL when the urb is finished. |
| |
| (08/28/2000) gkh |
| Added locks for SMP safeness. |
| |
| (08/08/2000) gkh |
| Fixed endian problem in visor_startup. |
| Fixed MOD_INC and MOD_DEC logic and the ability to open a port more |
| than once. |
| |
| (07/23/2000) gkh |
| Added pool of write urbs to speed up transfers to the visor. |
| |
| (07/19/2000) gkh |
| Added module_init and module_exit functions to handle the fact that this |
| driver is a loadable module now. |
| |
| (07/03/2000) gkh |
| Added visor_set_ioctl and visor_set_termios functions (they don't do much |
| of anything, but are good for debugging.) |
| |
| (06/25/2000) gkh |
| Fixed bug in visor_unthrottle that should help with the disconnect in PPP |
| bug that people have been reporting. |
| |
| (06/23/2000) gkh |
| Cleaned up debugging statements in a quest to find UHCI timeout bug. |
| |
| (04/27/2000) Ryan VanderBijl |
| Fixed memory leak in visor_close |
| |
| (03/26/2000) gkh |
| Split driver up into device specific pieces. |
| |
| ----------------------------------------------------------------------- |
| pl2303.c Change Log comments: |
| |
| 2002_Mar_26 gkh |
| allowed driver to work properly if there is no tty assigned to a port |
| (this happens for serial console devices.) |
| |
| 2001_Oct_06 gkh |
| Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. |
| |
| 2001_Sep_19 gkh |
| Added break support. |
| |
| 2001_Aug_30 gkh |
| fixed oops in write_bulk_callback. |
| |
| 2001_Aug_28 gkh |
| reworked buffer logic to be like other usb-serial drivers. Hopefully |
| removing some reported problems. |
| |
| 2001_Jun_06 gkh |
| finished porting to 2.4 format. |
| |
| |
| ----------------------------------------------------------------------- |
| io_edgeport.c Change Log comments: |
| |
| 2003_04_03 al borchers |
| - fixed a bug (that shows up with dosemu) where the tty struct is |
| used in a callback after it has been freed |
| |
| 2.3 2002_03_08 greg kroah-hartman |
| - fixed bug when multiple devices were attached at the same time. |
| |
| 2.2 2001_11_14 greg kroah-hartman |
| - fixed bug in edge_close that kept the port from being used more |
| than once. |
| - fixed memory leak on device removal. |
| - fixed potential double free of memory when command urb submitting |
| failed. |
| - other small cleanups when the device is removed |
| |
| 2.1 2001_07_09 greg kroah-hartman |
| - added support for TIOCMBIS and TIOCMBIC. |
| |
| (04/08/2001) gb |
| - Identify version on module load. |
| |
| 2.0 2001_03_05 greg kroah-hartman |
| - reworked entire driver to fit properly in with the other usb-serial |
| drivers. Occasional oopses still happen, but it's a good start. |
| |
| 1.2.3 (02/23/2001) greg kroah-hartman |
| - changed device table to work properly for 2.4.x final format. |
| - fixed problem with dropping data at high data rates. |
| |
| 1.2.2 (11/27/2000) greg kroah-hartman |
| - cleaned up more NTisms. |
| - Added device table for 2.4.0-test11 |
| |
| 1.2.1 (11/08/2000) greg kroah-hartman |
| - Started to clean up NTisms. |
| - Fixed problem with dev field of urb for kernels >= 2.4.0-test9 |
| |
| 1.2 (10/17/2000) David Iacovelli |
| Remove all EPIC code and GPL source |
| Fix RELEVANT_IFLAG macro to include flow control |
| changes port configuration changes. |
| Fix redefinition of SERIAL_MAGIC |
| Change all timeout values to 5 seconds |
| Tried to fix the UHCI multiple urb submission, but failed miserably. |
| it seems to work fine with OHCI. |
| ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must |
| find a way to work arount this UHCI bug ) |
| |
| 1.1 (10/11/2000) David Iacovelli |
| Fix XON/XOFF flow control to support both IXON and IXOFF |
| |
| 0.9.27 (06/30/2000) David Iacovelli |
| Added transmit queue and now allocate urb for command writes. |
| |
| 0.9.26 (06/29/2000) David Iacovelli |
| Add support for 80251 based edgeport |
| |
| 0.9.25 (06/27/2000) David Iacovelli |
| Do not close the port if it has multiple opens. |
| |
| 0.9.24 (05/26/2000) David Iacovelli |
| Add IOCTLs to support RXTX and JAVA POS |
| and first cut at running BlackBox Demo |
| |
| 0.9.23 (05/24/2000) David Iacovelli |
| Add IOCTLs to support RXTX and JAVA POS |
| |
| 0.9.22 (05/23/2000) David Iacovelli |
| fixed bug in enumeration. If epconfig turns on mapping by |
| path after a device is already plugged in, we now update |
| the mapping correctly |
| |
| 0.9.21 (05/16/2000) David Iacovelli |
| Added BlockUntilChaseResp() to also wait for txcredits |
| Updated the way we allocate and handle write URBs |
| Add debug code to dump buffers |
| |
| 0.9.20 (05/01/2000) David Iacovelli |
| change driver to use usb/tts/ |
| |
| 0.9.19 (05/01/2000) David Iacovelli |
| Update code to compile if DEBUG is off |
| |
| 0.9.18 (04/28/2000) David Iacovelli |
| cleanup and test tty_register with devfs |
| |
| 0.9.17 (04/27/2000) greg kroah-hartman |
| changed tty_register around to be like the way it |
| was before, but now it works properly with devfs. |
| |
| 0.9.16 (04/26/2000) david iacovelli |
| Fixed bug in GetProductInfo() |
| |
| 0.9.15 (04/25/2000) david iacovelli |
| Updated enumeration |
| |
| 0.9.14 (04/24/2000) david iacovelli |
| Removed all config/status IOCTLS and |
| converted to using /proc/edgeport |
| still playing with devfs |
| |
| 0.9.13 (04/24/2000) david iacovelli |
| Removed configuration based on ttyUSB0 |
| Added support for configuration using /prod/edgeport |
| first attempt at using devfs (not working yet!) |
| Added IOCTL to GetProductInfo() |
| Added support for custom baud rates |
| Add support for random port numbers |
| |
| 0.9.12 (04/18/2000) david iacovelli |
| added additional configuration IOCTLs |
| use ttyUSB0 for configuration |
| |
| 0.9.11 (04/17/2000) greg kroah-hartman |
| fixed module initialization race conditions. |
| made all urbs dynamically allocated. |
| made driver devfs compatible. now it only registers the tty device |
| when the device is actually plugged in. |
| |
| 0.9.10 (04/13/2000) greg kroah-hartman |
| added proc interface framework. |
| |
| 0.9.9 (04/13/2000) david iacovelli |
| added enumeration code and ioctls to configure the device |
| |
| 0.9.8 (04/12/2000) david iacovelli |
| Change interrupt read start when device is plugged in |
| and stop when device is removed |
| process interrupt reads when all ports are closed |
| (keep value of rxBytesAvail consistent with the edgeport) |
| set the USB_BULK_QUEUE flag so that we can shove a bunch |
| of urbs at once down the pipe |
| |
| 0.9.7 (04/10/2000) david iacovelli |
| start to add enumeration code. |
| generate serial number for epic devices |
| add support for kdb |
| |
| 0.9.6 (03/30/2000) david iacovelli |
| add IOCTL to get string, manufacture, and boot descriptors |
| |
| 0.9.5 (03/14/2000) greg kroah-hartman |
| more error checking added to SerialOpen to try to fix UHCI open problem |
| |
| 0.9.4 (03/09/2000) greg kroah-hartman |
| added more error checking to handle oops when data is hanging |
| around and tty is abruptly closed. |
| |
| 0.9.3 (03/09/2000) david iacovelli |
| Add epic support for xon/xoff chars |
| play with performance |
| |
| 0.9.2 (03/08/2000) greg kroah-hartman |
| changed most "info" calls to "dbg" |
| implemented flow control properly in the termios call |
| |
| 0.9.1 (03/08/2000) david iacovelli |
| added EPIC support |
| enabled bootloader update |
| |
| 0.9 (03/08/2000) greg kroah-hartman |
| Release to IO networks. |
| Integrated changes that David made |
| made getting urbs for writing SMP safe |
| |
| 0.8 (03/07/2000) greg kroah-hartman |
| Release to IO networks. |
| Fixed problems that were seen in code by David. |
| Now both Edgeport/4 and Edgeport/2 works properly. |
| Changed most of the functions to use port instead of serial. |
| |
| 0.7 (02/27/2000) greg kroah-hartman |
| Milestone 3 release. |
| Release to IO Networks |
| ioctl for waiting on line change implemented. |
| ioctl for getting statistics implemented. |
| multiport support working. |
| lsr and msr registers are now handled properly. |
| change break now hooked up and working. |
| support for all known Edgeport devices. |
| |
| 0.6 (02/22/2000) greg kroah-hartman |
| Release to IO networks. |
| CHASE is implemented correctly when port is closed. |
| SerialOpen now blocks correctly until port is fully opened. |
| |
| 0.5 (02/20/2000) greg kroah-hartman |
| Release to IO networks. |
| Known problems: |
| modem status register changes are not sent on to the user |
| CHASE is not implemented when the port is closed. |
| |
| 0.4 (02/16/2000) greg kroah-hartman |
| Second cut at the CeBit demo. |
| Doesn't leak memory on every write to the port |
| Still small leaks on startup. |
| Added support for Edgeport/2 and Edgeport/8 |
| |
| 0.3 (02/15/2000) greg kroah-hartman |
| CeBit demo release. |
| Force the line settings to 4800, 8, 1, e for the demo. |
| Warning! This version leaks memory like crazy! |
| |
| 0.2 (01/30/2000) greg kroah-hartman |
| Milestone 1 release. |
| Device is found by USB subsystem, enumerated, firmware is downloaded |
| and the descriptors are printed to the debug log, config is set, and |
| green light starts to blink. Open port works, and data can be sent |
| and received at the default settings of the UART. Loopback connector |
| and debug log confirms this. |
| |
| 0.1 (01/23/2000) greg kroah-hartman |
| Initial release to help IO Networks try to set up their test system. |
| Edgeport4 is recognized, firmware is downloaded, config is set so |
| device blinks green light every 3 sec. Port is bound, but opening, |
| closing, and sending data do not work properly. |
| |
| |
