| /* |
| * Support for AltoBeam GB20600 (a.k.a DMB-TH) demodulator |
| * ATBM8830, ATBM8831 |
| * |
| * Copyright (C) 2009 David T.L. Wong <davidtlwong@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <asm/div64.h> |
| #include "dvb_frontend.h" |
| |
| #include "atbm8830.h" |
| #include "atbm8830_priv.h" |
| |
| #define dprintk(args...) \ |
| do { \ |
| if (debug) \ |
| printk(KERN_DEBUG "atbm8830: " args); \ |
| } while (0) |
| |
| static int debug; |
| |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); |
| |
| static int atbm8830_write_reg(struct atbm_state *priv, u16 reg, u8 data) |
| { |
| int ret = 0; |
| u8 dev_addr; |
| u8 buf1[] = { reg >> 8, reg & 0xFF }; |
| u8 buf2[] = { data }; |
| struct i2c_msg msg1 = { .flags = 0, .buf = buf1, .len = 2 }; |
| struct i2c_msg msg2 = { .flags = 0, .buf = buf2, .len = 1 }; |
| |
| dev_addr = priv->config->demod_address; |
| msg1.addr = dev_addr; |
| msg2.addr = dev_addr; |
| |
| if (debug >= 2) |
| dprintk("%s: reg=0x%04X, data=0x%02X\n", __func__, reg, data); |
| |
| ret = i2c_transfer(priv->i2c, &msg1, 1); |
| if (ret != 1) |
| return -EIO; |
| |
| ret = i2c_transfer(priv->i2c, &msg2, 1); |
| return (ret != 1) ? -EIO : 0; |
| } |
| |
| static int atbm8830_read_reg(struct atbm_state *priv, u16 reg, u8 *p_data) |
| { |
| int ret; |
| u8 dev_addr; |
| |
| u8 buf1[] = { reg >> 8, reg & 0xFF }; |
| u8 buf2[] = { 0 }; |
| struct i2c_msg msg1 = { .flags = 0, .buf = buf1, .len = 2 }; |
| struct i2c_msg msg2 = { .flags = I2C_M_RD, .buf = buf2, .len = 1 }; |
| |
| dev_addr = priv->config->demod_address; |
| msg1.addr = dev_addr; |
| msg2.addr = dev_addr; |
| |
| ret = i2c_transfer(priv->i2c, &msg1, 1); |
| if (ret != 1) { |
| dprintk("%s: error reg=0x%04x, ret=%i\n", __func__, reg, ret); |
| return -EIO; |
| } |
| |
| ret = i2c_transfer(priv->i2c, &msg2, 1); |
| if (ret != 1) |
| return -EIO; |
| |
| *p_data = buf2[0]; |
| if (debug >= 2) |
| dprintk("%s: reg=0x%04X, data=0x%02X\n", |
| __func__, reg, buf2[0]); |
| |
| return 0; |
| } |
| |
| /* Lock register latch so that multi-register read is atomic */ |
| static inline int atbm8830_reglatch_lock(struct atbm_state *priv, int lock) |
| { |
| return atbm8830_write_reg(priv, REG_READ_LATCH, lock ? 1 : 0); |
| } |
| |
| static int set_osc_freq(struct atbm_state *priv, u32 freq /*in kHz*/) |
| { |
| u32 val; |
| u64 t; |
| |
| /* 0x100000 * freq / 30.4MHz */ |
| t = (u64)0x100000 * freq; |
| do_div(t, 30400); |
| val = t; |
| |
| atbm8830_write_reg(priv, REG_OSC_CLK, val); |
| atbm8830_write_reg(priv, REG_OSC_CLK + 1, val >> 8); |
| atbm8830_write_reg(priv, REG_OSC_CLK + 2, val >> 16); |
| |
| return 0; |
| } |
| |
| static int set_if_freq(struct atbm_state *priv, u32 freq /*in kHz*/) |
| { |
| |
| u32 fs = priv->config->osc_clk_freq; |
| u64 t; |
| u32 val; |
| u8 dat; |
| |
| if (freq != 0) { |
| /* 2 * PI * (freq - fs) / fs * (2 ^ 22) */ |
| t = (u64) 2 * 31416 * (freq - fs); |
| t <<= 22; |
| do_div(t, fs); |
| do_div(t, 1000); |
| val = t; |
| |
| atbm8830_write_reg(priv, REG_TUNER_BASEBAND, 1); |
| atbm8830_write_reg(priv, REG_IF_FREQ, val); |
| atbm8830_write_reg(priv, REG_IF_FREQ+1, val >> 8); |
| atbm8830_write_reg(priv, REG_IF_FREQ+2, val >> 16); |
| |
| atbm8830_read_reg(priv, REG_ADC_CONFIG, &dat); |
| dat &= 0xFC; |
| atbm8830_write_reg(priv, REG_ADC_CONFIG, dat); |
| } else { |
| /* Zero IF */ |
| atbm8830_write_reg(priv, REG_TUNER_BASEBAND, 0); |
| |
| atbm8830_read_reg(priv, REG_ADC_CONFIG, &dat); |
| dat &= 0xFC; |
| dat |= 0x02; |
| atbm8830_write_reg(priv, REG_ADC_CONFIG, dat); |
| |
| if (priv->config->zif_swap_iq) |
| atbm8830_write_reg(priv, REG_SWAP_I_Q, 0x03); |
| else |
| atbm8830_write_reg(priv, REG_SWAP_I_Q, 0x01); |
| } |
| |
| return 0; |
| } |
| |
| static int is_locked(struct atbm_state *priv, u8 *locked) |
| { |
| u8 status; |
| |
| atbm8830_read_reg(priv, REG_LOCK_STATUS, &status); |
| |
| if (locked != NULL) |
| *locked = (status == 1); |
| return 0; |
| } |
| |
| static int set_agc_config(struct atbm_state *priv, |
| u8 min, u8 max, u8 hold_loop) |
| { |
| /* no effect if both min and max are zero */ |
| if (!min && !max) |
| return 0; |
| |
| atbm8830_write_reg(priv, REG_AGC_MIN, min); |
| atbm8830_write_reg(priv, REG_AGC_MAX, max); |
| atbm8830_write_reg(priv, REG_AGC_HOLD_LOOP, hold_loop); |
| |
| return 0; |
| } |
| |
| static int set_static_channel_mode(struct atbm_state *priv) |
| { |
| int i; |
| |
| for (i = 0; i < 5; i++) |
| atbm8830_write_reg(priv, 0x099B + i, 0x08); |
| |
| atbm8830_write_reg(priv, 0x095B, 0x7F); |
| atbm8830_write_reg(priv, 0x09CB, 0x01); |
| atbm8830_write_reg(priv, 0x09CC, 0x7F); |
| atbm8830_write_reg(priv, 0x09CD, 0x7F); |
| atbm8830_write_reg(priv, 0x0E01, 0x20); |
| |
| /* For single carrier */ |
| atbm8830_write_reg(priv, 0x0B03, 0x0A); |
| atbm8830_write_reg(priv, 0x0935, 0x10); |
| atbm8830_write_reg(priv, 0x0936, 0x08); |
| atbm8830_write_reg(priv, 0x093E, 0x08); |
| atbm8830_write_reg(priv, 0x096E, 0x06); |
| |
| /* frame_count_max0 */ |
| atbm8830_write_reg(priv, 0x0B09, 0x00); |
| /* frame_count_max1 */ |
| atbm8830_write_reg(priv, 0x0B0A, 0x08); |
| |
| return 0; |
| } |
| |
| static int set_ts_config(struct atbm_state *priv) |
| { |
| const struct atbm8830_config *cfg = priv->config; |
| |
| /*Set parallel/serial ts mode*/ |
| atbm8830_write_reg(priv, REG_TS_SERIAL, cfg->serial_ts ? 1 : 0); |
| atbm8830_write_reg(priv, REG_TS_CLK_MODE, cfg->serial_ts ? 1 : 0); |
| /*Set ts sampling edge*/ |
| atbm8830_write_reg(priv, REG_TS_SAMPLE_EDGE, |
| cfg->ts_sampling_edge ? 1 : 0); |
| /*Set ts clock freerun*/ |
| atbm8830_write_reg(priv, REG_TS_CLK_FREERUN, |
| cfg->ts_clk_gated ? 0 : 1); |
| |
| return 0; |
| } |
| |
| static int atbm8830_init(struct dvb_frontend *fe) |
| { |
| struct atbm_state *priv = fe->demodulator_priv; |
| const struct atbm8830_config *cfg = priv->config; |
| |
| /*Set oscillator frequency*/ |
| set_osc_freq(priv, cfg->osc_clk_freq); |
| |
| /*Set IF frequency*/ |
| set_if_freq(priv, cfg->if_freq); |
| |
| /*Set AGC Config*/ |
| set_agc_config(priv, cfg->agc_min, cfg->agc_max, |
| cfg->agc_hold_loop); |
| |
| /*Set static channel mode*/ |
| set_static_channel_mode(priv); |
| |
| set_ts_config(priv); |
| /*Turn off DSP reset*/ |
| atbm8830_write_reg(priv, 0x000A, 0); |
| |
| /*SW version test*/ |
| atbm8830_write_reg(priv, 0x020C, 11); |
| |
| /* Run */ |
| atbm8830_write_reg(priv, REG_DEMOD_RUN, 1); |
| |
| return 0; |
| } |
| |
| |
| static void atbm8830_release(struct dvb_frontend *fe) |
| { |
| struct atbm_state *state = fe->demodulator_priv; |
| dprintk("%s\n", __func__); |
| |
| kfree(state); |
| } |
| |
| static int atbm8830_set_fe(struct dvb_frontend *fe, |
| struct dvb_frontend_parameters *fe_params) |
| { |
| struct atbm_state *priv = fe->demodulator_priv; |
| int i; |
| u8 locked = 0; |
| dprintk("%s\n", __func__); |
| |
| /* set frequency */ |
| if (fe->ops.tuner_ops.set_params) { |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| fe->ops.tuner_ops.set_params(fe, fe_params); |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| } |
| |
| /* start auto lock */ |
| for (i = 0; i < 10; i++) { |
| mdelay(100); |
| dprintk("Try %d\n", i); |
| is_locked(priv, &locked); |
| if (locked != 0) { |
| dprintk("ATBM8830 locked!\n"); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int atbm8830_get_fe(struct dvb_frontend *fe, |
| struct dvb_frontend_parameters *fe_params) |
| { |
| dprintk("%s\n", __func__); |
| |
| /* TODO: get real readings from device */ |
| /* inversion status */ |
| fe_params->inversion = INVERSION_OFF; |
| |
| /* bandwidth */ |
| fe_params->u.ofdm.bandwidth = BANDWIDTH_8_MHZ; |
| |
| fe_params->u.ofdm.code_rate_HP = FEC_AUTO; |
| fe_params->u.ofdm.code_rate_LP = FEC_AUTO; |
| |
| fe_params->u.ofdm.constellation = QAM_AUTO; |
| |
| /* transmission mode */ |
| fe_params->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO; |
| |
| /* guard interval */ |
| fe_params->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO; |
| |
| /* hierarchy */ |
| fe_params->u.ofdm.hierarchy_information = HIERARCHY_NONE; |
| |
| return 0; |
| } |
| |
| static int atbm8830_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *fesettings) |
| { |
| fesettings->min_delay_ms = 0; |
| fesettings->step_size = 0; |
| fesettings->max_drift = 0; |
| return 0; |
| } |
| |
| static int atbm8830_read_status(struct dvb_frontend *fe, fe_status_t *fe_status) |
| { |
| struct atbm_state *priv = fe->demodulator_priv; |
| u8 locked = 0; |
| u8 agc_locked = 0; |
| |
| dprintk("%s\n", __func__); |
| *fe_status = 0; |
| |
| is_locked(priv, &locked); |
| if (locked) { |
| *fe_status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; |
| } |
| dprintk("%s: fe_status=0x%x\n", __func__, *fe_status); |
| |
| atbm8830_read_reg(priv, REG_AGC_LOCK, &agc_locked); |
| dprintk("AGC Lock: %d\n", agc_locked); |
| |
| return 0; |
| } |
| |
| static int atbm8830_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| struct atbm_state *priv = fe->demodulator_priv; |
| u32 frame_err; |
| u8 t; |
| |
| dprintk("%s\n", __func__); |
| |
| atbm8830_reglatch_lock(priv, 1); |
| |
| atbm8830_read_reg(priv, REG_FRAME_ERR_CNT + 1, &t); |
| frame_err = t & 0x7F; |
| frame_err <<= 8; |
| atbm8830_read_reg(priv, REG_FRAME_ERR_CNT, &t); |
| frame_err |= t; |
| |
| atbm8830_reglatch_lock(priv, 0); |
| |
| *ber = frame_err * 100 / 32767; |
| |
| dprintk("%s: ber=0x%x\n", __func__, *ber); |
| return 0; |
| } |
| |
| static int atbm8830_read_signal_strength(struct dvb_frontend *fe, u16 *signal) |
| { |
| struct atbm_state *priv = fe->demodulator_priv; |
| u32 pwm; |
| u8 t; |
| |
| dprintk("%s\n", __func__); |
| atbm8830_reglatch_lock(priv, 1); |
| |
| atbm8830_read_reg(priv, REG_AGC_PWM_VAL + 1, &t); |
| pwm = t & 0x03; |
| pwm <<= 8; |
| atbm8830_read_reg(priv, REG_AGC_PWM_VAL, &t); |
| pwm |= t; |
| |
| atbm8830_reglatch_lock(priv, 0); |
| |
| dprintk("AGC PWM = 0x%02X\n", pwm); |
| pwm = 0x400 - pwm; |
| |
| *signal = pwm * 0x10000 / 0x400; |
| |
| return 0; |
| } |
| |
| static int atbm8830_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| dprintk("%s\n", __func__); |
| *snr = 0; |
| return 0; |
| } |
| |
| static int atbm8830_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) |
| { |
| dprintk("%s\n", __func__); |
| *ucblocks = 0; |
| return 0; |
| } |
| |
| static int atbm8830_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) |
| { |
| struct atbm_state *priv = fe->demodulator_priv; |
| |
| return atbm8830_write_reg(priv, REG_I2C_GATE, enable ? 1 : 0); |
| } |
| |
| static struct dvb_frontend_ops atbm8830_ops = { |
| .info = { |
| .name = "AltoBeam ATBM8830/8831 DMB-TH", |
| .type = FE_OFDM, |
| .frequency_min = 474000000, |
| .frequency_max = 858000000, |
| .frequency_stepsize = 10000, |
| .caps = |
| FE_CAN_FEC_AUTO | |
| FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_GUARD_INTERVAL_AUTO |
| }, |
| |
| .release = atbm8830_release, |
| |
| .init = atbm8830_init, |
| .sleep = NULL, |
| .write = NULL, |
| .i2c_gate_ctrl = atbm8830_i2c_gate_ctrl, |
| |
| .set_frontend = atbm8830_set_fe, |
| .get_frontend = atbm8830_get_fe, |
| .get_tune_settings = atbm8830_get_tune_settings, |
| |
| .read_status = atbm8830_read_status, |
| .read_ber = atbm8830_read_ber, |
| .read_signal_strength = atbm8830_read_signal_strength, |
| .read_snr = atbm8830_read_snr, |
| .read_ucblocks = atbm8830_read_ucblocks, |
| }; |
| |
| struct dvb_frontend *atbm8830_attach(const struct atbm8830_config *config, |
| struct i2c_adapter *i2c) |
| { |
| struct atbm_state *priv = NULL; |
| u8 data = 0; |
| |
| dprintk("%s()\n", __func__); |
| |
| if (config == NULL || i2c == NULL) |
| return NULL; |
| |
| priv = kzalloc(sizeof(struct atbm_state), GFP_KERNEL); |
| if (priv == NULL) |
| goto error_out; |
| |
| priv->config = config; |
| priv->i2c = i2c; |
| |
| /* check if the demod is there */ |
| if (atbm8830_read_reg(priv, REG_CHIP_ID, &data) != 0) { |
| dprintk("%s atbm8830/8831 not found at i2c addr 0x%02X\n", |
| __func__, priv->config->demod_address); |
| goto error_out; |
| } |
| dprintk("atbm8830 chip id: 0x%02X\n", data); |
| |
| memcpy(&priv->frontend.ops, &atbm8830_ops, |
| sizeof(struct dvb_frontend_ops)); |
| priv->frontend.demodulator_priv = priv; |
| |
| atbm8830_init(&priv->frontend); |
| |
| atbm8830_i2c_gate_ctrl(&priv->frontend, 1); |
| |
| return &priv->frontend; |
| |
| error_out: |
| dprintk("%s() error_out\n", __func__); |
| kfree(priv); |
| return NULL; |
| |
| } |
| EXPORT_SYMBOL(atbm8830_attach); |
| |
| MODULE_DESCRIPTION("AltoBeam ATBM8830/8831 GB20600 demodulator driver"); |
| MODULE_AUTHOR("David T. L. Wong <davidtlwong@gmail.com>"); |
| MODULE_LICENSE("GPL"); |