| /* |
| * drivers/base/power/domain.c - Common code related to device power domains. |
| * |
| * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp. |
| * |
| * This file is released under the GPLv2. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/io.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/pm_domain.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/sched.h> |
| #include <linux/suspend.h> |
| |
| static LIST_HEAD(gpd_list); |
| static DEFINE_MUTEX(gpd_list_lock); |
| |
| #ifdef CONFIG_PM |
| |
| static struct generic_pm_domain *dev_to_genpd(struct device *dev) |
| { |
| if (IS_ERR_OR_NULL(dev->pm_domain)) |
| return ERR_PTR(-EINVAL); |
| |
| return pd_to_genpd(dev->pm_domain); |
| } |
| |
| static bool genpd_sd_counter_dec(struct generic_pm_domain *genpd) |
| { |
| bool ret = false; |
| |
| if (!WARN_ON(atomic_read(&genpd->sd_count) == 0)) |
| ret = !!atomic_dec_and_test(&genpd->sd_count); |
| |
| return ret; |
| } |
| |
| static void genpd_sd_counter_inc(struct generic_pm_domain *genpd) |
| { |
| atomic_inc(&genpd->sd_count); |
| smp_mb__after_atomic_inc(); |
| } |
| |
| static void genpd_acquire_lock(struct generic_pm_domain *genpd) |
| { |
| DEFINE_WAIT(wait); |
| |
| mutex_lock(&genpd->lock); |
| /* |
| * Wait for the domain to transition into either the active, |
| * or the power off state. |
| */ |
| for (;;) { |
| prepare_to_wait(&genpd->status_wait_queue, &wait, |
| TASK_UNINTERRUPTIBLE); |
| if (genpd->status == GPD_STATE_ACTIVE |
| || genpd->status == GPD_STATE_POWER_OFF) |
| break; |
| mutex_unlock(&genpd->lock); |
| |
| schedule(); |
| |
| mutex_lock(&genpd->lock); |
| } |
| finish_wait(&genpd->status_wait_queue, &wait); |
| } |
| |
| static void genpd_release_lock(struct generic_pm_domain *genpd) |
| { |
| mutex_unlock(&genpd->lock); |
| } |
| |
| static void genpd_set_active(struct generic_pm_domain *genpd) |
| { |
| if (genpd->resume_count == 0) |
| genpd->status = GPD_STATE_ACTIVE; |
| } |
| |
| /** |
| * __pm_genpd_poweron - Restore power to a given PM domain and its masters. |
| * @genpd: PM domain to power up. |
| * |
| * Restore power to @genpd and all of its masters so that it is possible to |
| * resume a device belonging to it. |
| */ |
| int __pm_genpd_poweron(struct generic_pm_domain *genpd) |
| __releases(&genpd->lock) __acquires(&genpd->lock) |
| { |
| struct gpd_link *link; |
| DEFINE_WAIT(wait); |
| int ret = 0; |
| |
| /* If the domain's master is being waited for, we have to wait too. */ |
| for (;;) { |
| prepare_to_wait(&genpd->status_wait_queue, &wait, |
| TASK_UNINTERRUPTIBLE); |
| if (genpd->status != GPD_STATE_WAIT_MASTER) |
| break; |
| mutex_unlock(&genpd->lock); |
| |
| schedule(); |
| |
| mutex_lock(&genpd->lock); |
| } |
| finish_wait(&genpd->status_wait_queue, &wait); |
| |
| if (genpd->status == GPD_STATE_ACTIVE |
| || (genpd->prepared_count > 0 && genpd->suspend_power_off)) |
| return 0; |
| |
| if (genpd->status != GPD_STATE_POWER_OFF) { |
| genpd_set_active(genpd); |
| return 0; |
| } |
| |
| /* |
| * The list is guaranteed not to change while the loop below is being |
| * executed, unless one of the masters' .power_on() callbacks fiddles |
| * with it. |
| */ |
| list_for_each_entry(link, &genpd->slave_links, slave_node) { |
| genpd_sd_counter_inc(link->master); |
| genpd->status = GPD_STATE_WAIT_MASTER; |
| |
| mutex_unlock(&genpd->lock); |
| |
| ret = pm_genpd_poweron(link->master); |
| |
| mutex_lock(&genpd->lock); |
| |
| /* |
| * The "wait for parent" status is guaranteed not to change |
| * while the master is powering on. |
| */ |
| genpd->status = GPD_STATE_POWER_OFF; |
| wake_up_all(&genpd->status_wait_queue); |
| if (ret) { |
| genpd_sd_counter_dec(link->master); |
| goto err; |
| } |
| } |
| |
| if (genpd->power_on) { |
| ret = genpd->power_on(genpd); |
| if (ret) |
| goto err; |
| } |
| |
| genpd_set_active(genpd); |
| |
| return 0; |
| |
| err: |
| list_for_each_entry_continue_reverse(link, &genpd->slave_links, slave_node) |
| genpd_sd_counter_dec(link->master); |
| |
| return ret; |
| } |
| |
| /** |
| * pm_genpd_poweron - Restore power to a given PM domain and its masters. |
| * @genpd: PM domain to power up. |
| */ |
| int pm_genpd_poweron(struct generic_pm_domain *genpd) |
| { |
| int ret; |
| |
| mutex_lock(&genpd->lock); |
| ret = __pm_genpd_poweron(genpd); |
| mutex_unlock(&genpd->lock); |
| return ret; |
| } |
| |
| #endif /* CONFIG_PM */ |
| |
| #ifdef CONFIG_PM_RUNTIME |
| |
| /** |
| * __pm_genpd_save_device - Save the pre-suspend state of a device. |
| * @pdd: Domain data of the device to save the state of. |
| * @genpd: PM domain the device belongs to. |
| */ |
| static int __pm_genpd_save_device(struct pm_domain_data *pdd, |
| struct generic_pm_domain *genpd) |
| __releases(&genpd->lock) __acquires(&genpd->lock) |
| { |
| struct generic_pm_domain_data *gpd_data = to_gpd_data(pdd); |
| struct device *dev = pdd->dev; |
| struct device_driver *drv = dev->driver; |
| int ret = 0; |
| |
| if (gpd_data->need_restore) |
| return 0; |
| |
| mutex_unlock(&genpd->lock); |
| |
| if (drv && drv->pm && drv->pm->runtime_suspend) { |
| if (genpd->start_device) |
| genpd->start_device(dev); |
| |
| ret = drv->pm->runtime_suspend(dev); |
| |
| if (genpd->stop_device) |
| genpd->stop_device(dev); |
| } |
| |
| mutex_lock(&genpd->lock); |
| |
| if (!ret) |
| gpd_data->need_restore = true; |
| |
| return ret; |
| } |
| |
| /** |
| * __pm_genpd_restore_device - Restore the pre-suspend state of a device. |
| * @pdd: Domain data of the device to restore the state of. |
| * @genpd: PM domain the device belongs to. |
| */ |
| static void __pm_genpd_restore_device(struct pm_domain_data *pdd, |
| struct generic_pm_domain *genpd) |
| __releases(&genpd->lock) __acquires(&genpd->lock) |
| { |
| struct generic_pm_domain_data *gpd_data = to_gpd_data(pdd); |
| struct device *dev = pdd->dev; |
| struct device_driver *drv = dev->driver; |
| |
| if (!gpd_data->need_restore) |
| return; |
| |
| mutex_unlock(&genpd->lock); |
| |
| if (drv && drv->pm && drv->pm->runtime_resume) { |
| if (genpd->start_device) |
| genpd->start_device(dev); |
| |
| drv->pm->runtime_resume(dev); |
| |
| if (genpd->stop_device) |
| genpd->stop_device(dev); |
| } |
| |
| mutex_lock(&genpd->lock); |
| |
| gpd_data->need_restore = false; |
| } |
| |
| /** |
| * genpd_abort_poweroff - Check if a PM domain power off should be aborted. |
| * @genpd: PM domain to check. |
| * |
| * Return true if a PM domain's status changed to GPD_STATE_ACTIVE during |
| * a "power off" operation, which means that a "power on" has occured in the |
| * meantime, or if its resume_count field is different from zero, which means |
| * that one of its devices has been resumed in the meantime. |
| */ |
| static bool genpd_abort_poweroff(struct generic_pm_domain *genpd) |
| { |
| return genpd->status == GPD_STATE_WAIT_MASTER |
| || genpd->status == GPD_STATE_ACTIVE || genpd->resume_count > 0; |
| } |
| |
| /** |
| * genpd_queue_power_off_work - Queue up the execution of pm_genpd_poweroff(). |
| * @genpd: PM domait to power off. |
| * |
| * Queue up the execution of pm_genpd_poweroff() unless it's already been done |
| * before. |
| */ |
| void genpd_queue_power_off_work(struct generic_pm_domain *genpd) |
| { |
| if (!work_pending(&genpd->power_off_work)) |
| queue_work(pm_wq, &genpd->power_off_work); |
| } |
| |
| /** |
| * pm_genpd_poweroff - Remove power from a given PM domain. |
| * @genpd: PM domain to power down. |
| * |
| * If all of the @genpd's devices have been suspended and all of its subdomains |
| * have been powered down, run the runtime suspend callbacks provided by all of |
| * the @genpd's devices' drivers and remove power from @genpd. |
| */ |
| static int pm_genpd_poweroff(struct generic_pm_domain *genpd) |
| __releases(&genpd->lock) __acquires(&genpd->lock) |
| { |
| struct pm_domain_data *pdd; |
| struct gpd_link *link; |
| unsigned int not_suspended; |
| int ret = 0; |
| |
| start: |
| /* |
| * Do not try to power off the domain in the following situations: |
| * (1) The domain is already in the "power off" state. |
| * (2) The domain is waiting for its master to power up. |
| * (3) One of the domain's devices is being resumed right now. |
| * (4) System suspend is in progress. |
| */ |
| if (genpd->status == GPD_STATE_POWER_OFF |
| || genpd->status == GPD_STATE_WAIT_MASTER |
| || genpd->resume_count > 0 || genpd->prepared_count > 0) |
| return 0; |
| |
| if (atomic_read(&genpd->sd_count) > 0) |
| return -EBUSY; |
| |
| not_suspended = 0; |
| list_for_each_entry(pdd, &genpd->dev_list, list_node) |
| if (pdd->dev->driver && (!pm_runtime_suspended(pdd->dev) |
| || pdd->dev->power.irq_safe)) |
| not_suspended++; |
| |
| if (not_suspended > genpd->in_progress) |
| return -EBUSY; |
| |
| if (genpd->poweroff_task) { |
| /* |
| * Another instance of pm_genpd_poweroff() is executing |
| * callbacks, so tell it to start over and return. |
| */ |
| genpd->status = GPD_STATE_REPEAT; |
| return 0; |
| } |
| |
| if (genpd->gov && genpd->gov->power_down_ok) { |
| if (!genpd->gov->power_down_ok(&genpd->domain)) |
| return -EAGAIN; |
| } |
| |
| genpd->status = GPD_STATE_BUSY; |
| genpd->poweroff_task = current; |
| |
| list_for_each_entry_reverse(pdd, &genpd->dev_list, list_node) { |
| ret = atomic_read(&genpd->sd_count) == 0 ? |
| __pm_genpd_save_device(pdd, genpd) : -EBUSY; |
| |
| if (genpd_abort_poweroff(genpd)) |
| goto out; |
| |
| if (ret) { |
| genpd_set_active(genpd); |
| goto out; |
| } |
| |
| if (genpd->status == GPD_STATE_REPEAT) { |
| genpd->poweroff_task = NULL; |
| goto start; |
| } |
| } |
| |
| if (genpd->power_off) { |
| if (atomic_read(&genpd->sd_count) > 0) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| /* |
| * If sd_count > 0 at this point, one of the subdomains hasn't |
| * managed to call pm_genpd_poweron() for the master yet after |
| * incrementing it. In that case pm_genpd_poweron() will wait |
| * for us to drop the lock, so we can call .power_off() and let |
| * the pm_genpd_poweron() restore power for us (this shouldn't |
| * happen very often). |
| */ |
| ret = genpd->power_off(genpd); |
| if (ret == -EBUSY) { |
| genpd_set_active(genpd); |
| goto out; |
| } |
| } |
| |
| genpd->status = GPD_STATE_POWER_OFF; |
| |
| list_for_each_entry(link, &genpd->slave_links, slave_node) { |
| genpd_sd_counter_dec(link->master); |
| genpd_queue_power_off_work(link->master); |
| } |
| |
| out: |
| genpd->poweroff_task = NULL; |
| wake_up_all(&genpd->status_wait_queue); |
| return ret; |
| } |
| |
| /** |
| * genpd_power_off_work_fn - Power off PM domain whose subdomain count is 0. |
| * @work: Work structure used for scheduling the execution of this function. |
| */ |
| static void genpd_power_off_work_fn(struct work_struct *work) |
| { |
| struct generic_pm_domain *genpd; |
| |
| genpd = container_of(work, struct generic_pm_domain, power_off_work); |
| |
| genpd_acquire_lock(genpd); |
| pm_genpd_poweroff(genpd); |
| genpd_release_lock(genpd); |
| } |
| |
| /** |
| * pm_genpd_runtime_suspend - Suspend a device belonging to I/O PM domain. |
| * @dev: Device to suspend. |
| * |
| * Carry out a runtime suspend of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a PM domain consisting of I/O devices. |
| */ |
| static int pm_genpd_runtime_suspend(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| might_sleep_if(!genpd->dev_irq_safe); |
| |
| if (genpd->stop_device) { |
| int ret = genpd->stop_device(dev); |
| if (ret) |
| return ret; |
| } |
| |
| /* |
| * If power.irq_safe is set, this routine will be run with interrupts |
| * off, so it can't use mutexes. |
| */ |
| if (dev->power.irq_safe) |
| return 0; |
| |
| mutex_lock(&genpd->lock); |
| genpd->in_progress++; |
| pm_genpd_poweroff(genpd); |
| genpd->in_progress--; |
| mutex_unlock(&genpd->lock); |
| |
| return 0; |
| } |
| |
| /** |
| * pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain. |
| * @dev: Device to resume. |
| * |
| * Carry out a runtime resume of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a PM domain consisting of I/O devices. |
| */ |
| static int pm_genpd_runtime_resume(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| DEFINE_WAIT(wait); |
| int ret; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| might_sleep_if(!genpd->dev_irq_safe); |
| |
| /* If power.irq_safe, the PM domain is never powered off. */ |
| if (dev->power.irq_safe) |
| goto out; |
| |
| mutex_lock(&genpd->lock); |
| ret = __pm_genpd_poweron(genpd); |
| if (ret) { |
| mutex_unlock(&genpd->lock); |
| return ret; |
| } |
| genpd->status = GPD_STATE_BUSY; |
| genpd->resume_count++; |
| for (;;) { |
| prepare_to_wait(&genpd->status_wait_queue, &wait, |
| TASK_UNINTERRUPTIBLE); |
| /* |
| * If current is the powering off task, we have been called |
| * reentrantly from one of the device callbacks, so we should |
| * not wait. |
| */ |
| if (!genpd->poweroff_task || genpd->poweroff_task == current) |
| break; |
| mutex_unlock(&genpd->lock); |
| |
| schedule(); |
| |
| mutex_lock(&genpd->lock); |
| } |
| finish_wait(&genpd->status_wait_queue, &wait); |
| __pm_genpd_restore_device(dev->power.subsys_data->domain_data, genpd); |
| genpd->resume_count--; |
| genpd_set_active(genpd); |
| wake_up_all(&genpd->status_wait_queue); |
| mutex_unlock(&genpd->lock); |
| |
| out: |
| if (genpd->start_device) |
| genpd->start_device(dev); |
| |
| return 0; |
| } |
| |
| /** |
| * pm_genpd_poweroff_unused - Power off all PM domains with no devices in use. |
| */ |
| void pm_genpd_poweroff_unused(void) |
| { |
| struct generic_pm_domain *genpd; |
| |
| mutex_lock(&gpd_list_lock); |
| |
| list_for_each_entry(genpd, &gpd_list, gpd_list_node) |
| genpd_queue_power_off_work(genpd); |
| |
| mutex_unlock(&gpd_list_lock); |
| } |
| |
| #else |
| |
| static inline void genpd_power_off_work_fn(struct work_struct *work) {} |
| |
| #define pm_genpd_runtime_suspend NULL |
| #define pm_genpd_runtime_resume NULL |
| |
| #endif /* CONFIG_PM_RUNTIME */ |
| |
| #ifdef CONFIG_PM_SLEEP |
| |
| /** |
| * pm_genpd_sync_poweroff - Synchronously power off a PM domain and its masters. |
| * @genpd: PM domain to power off, if possible. |
| * |
| * Check if the given PM domain can be powered off (during system suspend or |
| * hibernation) and do that if so. Also, in that case propagate to its masters. |
| * |
| * This function is only called in "noirq" stages of system power transitions, |
| * so it need not acquire locks (all of the "noirq" callbacks are executed |
| * sequentially, so it is guaranteed that it will never run twice in parallel). |
| */ |
| static void pm_genpd_sync_poweroff(struct generic_pm_domain *genpd) |
| { |
| struct gpd_link *link; |
| |
| if (genpd->status == GPD_STATE_POWER_OFF) |
| return; |
| |
| if (genpd->suspended_count != genpd->device_count |
| || atomic_read(&genpd->sd_count) > 0) |
| return; |
| |
| if (genpd->power_off) |
| genpd->power_off(genpd); |
| |
| genpd->status = GPD_STATE_POWER_OFF; |
| |
| list_for_each_entry(link, &genpd->slave_links, slave_node) { |
| genpd_sd_counter_dec(link->master); |
| pm_genpd_sync_poweroff(link->master); |
| } |
| } |
| |
| /** |
| * resume_needed - Check whether to resume a device before system suspend. |
| * @dev: Device to check. |
| * @genpd: PM domain the device belongs to. |
| * |
| * There are two cases in which a device that can wake up the system from sleep |
| * states should be resumed by pm_genpd_prepare(): (1) if the device is enabled |
| * to wake up the system and it has to remain active for this purpose while the |
| * system is in the sleep state and (2) if the device is not enabled to wake up |
| * the system from sleep states and it generally doesn't generate wakeup signals |
| * by itself (those signals are generated on its behalf by other parts of the |
| * system). In the latter case it may be necessary to reconfigure the device's |
| * wakeup settings during system suspend, because it may have been set up to |
| * signal remote wakeup from the system's working state as needed by runtime PM. |
| * Return 'true' in either of the above cases. |
| */ |
| static bool resume_needed(struct device *dev, struct generic_pm_domain *genpd) |
| { |
| bool active_wakeup; |
| |
| if (!device_can_wakeup(dev)) |
| return false; |
| |
| active_wakeup = genpd->active_wakeup && genpd->active_wakeup(dev); |
| return device_may_wakeup(dev) ? active_wakeup : !active_wakeup; |
| } |
| |
| /** |
| * pm_genpd_prepare - Start power transition of a device in a PM domain. |
| * @dev: Device to start the transition of. |
| * |
| * Start a power transition of a device (during a system-wide power transition) |
| * under the assumption that its pm_domain field points to the domain member of |
| * an object of type struct generic_pm_domain representing a PM domain |
| * consisting of I/O devices. |
| */ |
| static int pm_genpd_prepare(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| int ret; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| /* |
| * If a wakeup request is pending for the device, it should be woken up |
| * at this point and a system wakeup event should be reported if it's |
| * set up to wake up the system from sleep states. |
| */ |
| pm_runtime_get_noresume(dev); |
| if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) |
| pm_wakeup_event(dev, 0); |
| |
| if (pm_wakeup_pending()) { |
| pm_runtime_put_sync(dev); |
| return -EBUSY; |
| } |
| |
| if (resume_needed(dev, genpd)) |
| pm_runtime_resume(dev); |
| |
| genpd_acquire_lock(genpd); |
| |
| if (genpd->prepared_count++ == 0) |
| genpd->suspend_power_off = genpd->status == GPD_STATE_POWER_OFF; |
| |
| genpd_release_lock(genpd); |
| |
| if (genpd->suspend_power_off) { |
| pm_runtime_put_noidle(dev); |
| return 0; |
| } |
| |
| /* |
| * The PM domain must be in the GPD_STATE_ACTIVE state at this point, |
| * so pm_genpd_poweron() will return immediately, but if the device |
| * is suspended (e.g. it's been stopped by .stop_device()), we need |
| * to make it operational. |
| */ |
| pm_runtime_resume(dev); |
| __pm_runtime_disable(dev, false); |
| |
| ret = pm_generic_prepare(dev); |
| if (ret) { |
| mutex_lock(&genpd->lock); |
| |
| if (--genpd->prepared_count == 0) |
| genpd->suspend_power_off = false; |
| |
| mutex_unlock(&genpd->lock); |
| pm_runtime_enable(dev); |
| } |
| |
| pm_runtime_put_sync(dev); |
| return ret; |
| } |
| |
| /** |
| * pm_genpd_suspend - Suspend a device belonging to an I/O PM domain. |
| * @dev: Device to suspend. |
| * |
| * Suspend a device under the assumption that its pm_domain field points to the |
| * domain member of an object of type struct generic_pm_domain representing |
| * a PM domain consisting of I/O devices. |
| */ |
| static int pm_genpd_suspend(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : pm_generic_suspend(dev); |
| } |
| |
| /** |
| * pm_genpd_suspend_noirq - Late suspend of a device from an I/O PM domain. |
| * @dev: Device to suspend. |
| * |
| * Carry out a late suspend of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a PM domain consisting of I/O devices. |
| */ |
| static int pm_genpd_suspend_noirq(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| int ret; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| if (genpd->suspend_power_off) |
| return 0; |
| |
| ret = pm_generic_suspend_noirq(dev); |
| if (ret) |
| return ret; |
| |
| if (dev->power.wakeup_path |
| && genpd->active_wakeup && genpd->active_wakeup(dev)) |
| return 0; |
| |
| if (genpd->stop_device) |
| genpd->stop_device(dev); |
| |
| /* |
| * Since all of the "noirq" callbacks are executed sequentially, it is |
| * guaranteed that this function will never run twice in parallel for |
| * the same PM domain, so it is not necessary to use locking here. |
| */ |
| genpd->suspended_count++; |
| pm_genpd_sync_poweroff(genpd); |
| |
| return 0; |
| } |
| |
| /** |
| * pm_genpd_resume_noirq - Early resume of a device from an I/O power domain. |
| * @dev: Device to resume. |
| * |
| * Carry out an early resume of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a power domain consisting of I/O |
| * devices. |
| */ |
| static int pm_genpd_resume_noirq(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| if (genpd->suspend_power_off |
| || (dev->power.wakeup_path && genpd_dev_active_wakeup(genpd, dev))) |
| return 0; |
| |
| /* |
| * Since all of the "noirq" callbacks are executed sequentially, it is |
| * guaranteed that this function will never run twice in parallel for |
| * the same PM domain, so it is not necessary to use locking here. |
| */ |
| pm_genpd_poweron(genpd); |
| genpd->suspended_count--; |
| if (genpd->start_device) |
| genpd->start_device(dev); |
| |
| return pm_generic_resume_noirq(dev); |
| } |
| |
| /** |
| * pm_genpd_resume - Resume a device belonging to an I/O power domain. |
| * @dev: Device to resume. |
| * |
| * Resume a device under the assumption that its pm_domain field points to the |
| * domain member of an object of type struct generic_pm_domain representing |
| * a power domain consisting of I/O devices. |
| */ |
| static int pm_genpd_resume(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : pm_generic_resume(dev); |
| } |
| |
| /** |
| * pm_genpd_freeze - Freeze a device belonging to an I/O power domain. |
| * @dev: Device to freeze. |
| * |
| * Freeze a device under the assumption that its pm_domain field points to the |
| * domain member of an object of type struct generic_pm_domain representing |
| * a power domain consisting of I/O devices. |
| */ |
| static int pm_genpd_freeze(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : pm_generic_freeze(dev); |
| } |
| |
| /** |
| * pm_genpd_freeze_noirq - Late freeze of a device from an I/O power domain. |
| * @dev: Device to freeze. |
| * |
| * Carry out a late freeze of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a power domain consisting of I/O |
| * devices. |
| */ |
| static int pm_genpd_freeze_noirq(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| int ret; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| if (genpd->suspend_power_off) |
| return 0; |
| |
| ret = pm_generic_freeze_noirq(dev); |
| if (ret) |
| return ret; |
| |
| if (genpd->stop_device) |
| genpd->stop_device(dev); |
| |
| return 0; |
| } |
| |
| /** |
| * pm_genpd_thaw_noirq - Early thaw of a device from an I/O power domain. |
| * @dev: Device to thaw. |
| * |
| * Carry out an early thaw of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a power domain consisting of I/O |
| * devices. |
| */ |
| static int pm_genpd_thaw_noirq(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| if (genpd->suspend_power_off) |
| return 0; |
| |
| if (genpd->start_device) |
| genpd->start_device(dev); |
| |
| return pm_generic_thaw_noirq(dev); |
| } |
| |
| /** |
| * pm_genpd_thaw - Thaw a device belonging to an I/O power domain. |
| * @dev: Device to thaw. |
| * |
| * Thaw a device under the assumption that its pm_domain field points to the |
| * domain member of an object of type struct generic_pm_domain representing |
| * a power domain consisting of I/O devices. |
| */ |
| static int pm_genpd_thaw(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : pm_generic_thaw(dev); |
| } |
| |
| /** |
| * pm_genpd_dev_poweroff - Power off a device belonging to an I/O PM domain. |
| * @dev: Device to suspend. |
| * |
| * Power off a device under the assumption that its pm_domain field points to |
| * the domain member of an object of type struct generic_pm_domain representing |
| * a PM domain consisting of I/O devices. |
| */ |
| static int pm_genpd_dev_poweroff(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : pm_generic_poweroff(dev); |
| } |
| |
| /** |
| * pm_genpd_dev_poweroff_noirq - Late power off of a device from a PM domain. |
| * @dev: Device to suspend. |
| * |
| * Carry out a late powering off of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a PM domain consisting of I/O devices. |
| */ |
| static int pm_genpd_dev_poweroff_noirq(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| int ret; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| if (genpd->suspend_power_off) |
| return 0; |
| |
| ret = pm_generic_poweroff_noirq(dev); |
| if (ret) |
| return ret; |
| |
| if (dev->power.wakeup_path |
| && genpd->active_wakeup && genpd->active_wakeup(dev)) |
| return 0; |
| |
| if (genpd->stop_device) |
| genpd->stop_device(dev); |
| |
| /* |
| * Since all of the "noirq" callbacks are executed sequentially, it is |
| * guaranteed that this function will never run twice in parallel for |
| * the same PM domain, so it is not necessary to use locking here. |
| */ |
| genpd->suspended_count++; |
| pm_genpd_sync_poweroff(genpd); |
| |
| return 0; |
| } |
| |
| /** |
| * pm_genpd_restore_noirq - Early restore of a device from an I/O power domain. |
| * @dev: Device to resume. |
| * |
| * Carry out an early restore of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a power domain consisting of I/O |
| * devices. |
| */ |
| static int pm_genpd_restore_noirq(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| /* |
| * Since all of the "noirq" callbacks are executed sequentially, it is |
| * guaranteed that this function will never run twice in parallel for |
| * the same PM domain, so it is not necessary to use locking here. |
| */ |
| genpd->status = GPD_STATE_POWER_OFF; |
| if (genpd->suspend_power_off) { |
| /* |
| * The boot kernel might put the domain into the power on state, |
| * so make sure it really is powered off. |
| */ |
| if (genpd->power_off) |
| genpd->power_off(genpd); |
| return 0; |
| } |
| |
| pm_genpd_poweron(genpd); |
| genpd->suspended_count--; |
| if (genpd->start_device) |
| genpd->start_device(dev); |
| |
| return pm_generic_restore_noirq(dev); |
| } |
| |
| /** |
| * pm_genpd_restore - Restore a device belonging to an I/O power domain. |
| * @dev: Device to resume. |
| * |
| * Restore a device under the assumption that its pm_domain field points to the |
| * domain member of an object of type struct generic_pm_domain representing |
| * a power domain consisting of I/O devices. |
| */ |
| static int pm_genpd_restore(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : pm_generic_restore(dev); |
| } |
| |
| /** |
| * pm_genpd_complete - Complete power transition of a device in a power domain. |
| * @dev: Device to complete the transition of. |
| * |
| * Complete a power transition of a device (during a system-wide power |
| * transition) under the assumption that its pm_domain field points to the |
| * domain member of an object of type struct generic_pm_domain representing |
| * a power domain consisting of I/O devices. |
| */ |
| static void pm_genpd_complete(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| bool run_complete; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return; |
| |
| mutex_lock(&genpd->lock); |
| |
| run_complete = !genpd->suspend_power_off; |
| if (--genpd->prepared_count == 0) |
| genpd->suspend_power_off = false; |
| |
| mutex_unlock(&genpd->lock); |
| |
| if (run_complete) { |
| pm_generic_complete(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| pm_runtime_idle(dev); |
| } |
| } |
| |
| #else |
| |
| #define pm_genpd_prepare NULL |
| #define pm_genpd_suspend NULL |
| #define pm_genpd_suspend_noirq NULL |
| #define pm_genpd_resume_noirq NULL |
| #define pm_genpd_resume NULL |
| #define pm_genpd_freeze NULL |
| #define pm_genpd_freeze_noirq NULL |
| #define pm_genpd_thaw_noirq NULL |
| #define pm_genpd_thaw NULL |
| #define pm_genpd_dev_poweroff_noirq NULL |
| #define pm_genpd_dev_poweroff NULL |
| #define pm_genpd_restore_noirq NULL |
| #define pm_genpd_restore NULL |
| #define pm_genpd_complete NULL |
| |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| /** |
| * pm_genpd_add_device - Add a device to an I/O PM domain. |
| * @genpd: PM domain to add the device to. |
| * @dev: Device to be added. |
| */ |
| int pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev) |
| { |
| struct generic_pm_domain_data *gpd_data; |
| struct pm_domain_data *pdd; |
| int ret = 0; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(dev)) |
| return -EINVAL; |
| |
| genpd_acquire_lock(genpd); |
| |
| if (genpd->status == GPD_STATE_POWER_OFF) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (genpd->prepared_count > 0) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| list_for_each_entry(pdd, &genpd->dev_list, list_node) |
| if (pdd->dev == dev) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| gpd_data = kzalloc(sizeof(*gpd_data), GFP_KERNEL); |
| if (!gpd_data) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| genpd->device_count++; |
| |
| dev->pm_domain = &genpd->domain; |
| dev_pm_get_subsys_data(dev); |
| dev->power.subsys_data->domain_data = &gpd_data->base; |
| gpd_data->base.dev = dev; |
| gpd_data->need_restore = false; |
| list_add_tail(&gpd_data->base.list_node, &genpd->dev_list); |
| |
| out: |
| genpd_release_lock(genpd); |
| |
| return ret; |
| } |
| |
| /** |
| * pm_genpd_remove_device - Remove a device from an I/O PM domain. |
| * @genpd: PM domain to remove the device from. |
| * @dev: Device to be removed. |
| */ |
| int pm_genpd_remove_device(struct generic_pm_domain *genpd, |
| struct device *dev) |
| { |
| struct pm_domain_data *pdd; |
| int ret = -EINVAL; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(dev)) |
| return -EINVAL; |
| |
| genpd_acquire_lock(genpd); |
| |
| if (genpd->prepared_count > 0) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| list_for_each_entry(pdd, &genpd->dev_list, list_node) { |
| if (pdd->dev != dev) |
| continue; |
| |
| list_del_init(&pdd->list_node); |
| pdd->dev = NULL; |
| dev_pm_put_subsys_data(dev); |
| dev->pm_domain = NULL; |
| kfree(to_gpd_data(pdd)); |
| |
| genpd->device_count--; |
| |
| ret = 0; |
| break; |
| } |
| |
| out: |
| genpd_release_lock(genpd); |
| |
| return ret; |
| } |
| |
| /** |
| * pm_genpd_add_subdomain - Add a subdomain to an I/O PM domain. |
| * @genpd: Master PM domain to add the subdomain to. |
| * @subdomain: Subdomain to be added. |
| */ |
| int pm_genpd_add_subdomain(struct generic_pm_domain *genpd, |
| struct generic_pm_domain *subdomain) |
| { |
| struct gpd_link *link; |
| int ret = 0; |
| |
| if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(subdomain)) |
| return -EINVAL; |
| |
| start: |
| genpd_acquire_lock(genpd); |
| mutex_lock_nested(&subdomain->lock, SINGLE_DEPTH_NESTING); |
| |
| if (subdomain->status != GPD_STATE_POWER_OFF |
| && subdomain->status != GPD_STATE_ACTIVE) { |
| mutex_unlock(&subdomain->lock); |
| genpd_release_lock(genpd); |
| goto start; |
| } |
| |
| if (genpd->status == GPD_STATE_POWER_OFF |
| && subdomain->status != GPD_STATE_POWER_OFF) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| list_for_each_entry(link, &genpd->slave_links, slave_node) { |
| if (link->slave == subdomain && link->master == genpd) { |
| ret = -EINVAL; |
| goto out; |
| } |
| } |
| |
| link = kzalloc(sizeof(*link), GFP_KERNEL); |
| if (!link) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| link->master = genpd; |
| list_add_tail(&link->master_node, &genpd->master_links); |
| link->slave = subdomain; |
| list_add_tail(&link->slave_node, &subdomain->slave_links); |
| if (subdomain->status != GPD_STATE_POWER_OFF) |
| genpd_sd_counter_inc(genpd); |
| |
| out: |
| mutex_unlock(&subdomain->lock); |
| genpd_release_lock(genpd); |
| |
| return ret; |
| } |
| |
| /** |
| * pm_genpd_remove_subdomain - Remove a subdomain from an I/O PM domain. |
| * @genpd: Master PM domain to remove the subdomain from. |
| * @subdomain: Subdomain to be removed. |
| */ |
| int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd, |
| struct generic_pm_domain *subdomain) |
| { |
| struct gpd_link *link; |
| int ret = -EINVAL; |
| |
| if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(subdomain)) |
| return -EINVAL; |
| |
| start: |
| genpd_acquire_lock(genpd); |
| |
| list_for_each_entry(link, &genpd->master_links, master_node) { |
| if (link->slave != subdomain) |
| continue; |
| |
| mutex_lock_nested(&subdomain->lock, SINGLE_DEPTH_NESTING); |
| |
| if (subdomain->status != GPD_STATE_POWER_OFF |
| && subdomain->status != GPD_STATE_ACTIVE) { |
| mutex_unlock(&subdomain->lock); |
| genpd_release_lock(genpd); |
| goto start; |
| } |
| |
| list_del(&link->master_node); |
| list_del(&link->slave_node); |
| kfree(link); |
| if (subdomain->status != GPD_STATE_POWER_OFF) |
| genpd_sd_counter_dec(genpd); |
| |
| mutex_unlock(&subdomain->lock); |
| |
| ret = 0; |
| break; |
| } |
| |
| genpd_release_lock(genpd); |
| |
| return ret; |
| } |
| |
| /** |
| * pm_genpd_init - Initialize a generic I/O PM domain object. |
| * @genpd: PM domain object to initialize. |
| * @gov: PM domain governor to associate with the domain (may be NULL). |
| * @is_off: Initial value of the domain's power_is_off field. |
| */ |
| void pm_genpd_init(struct generic_pm_domain *genpd, |
| struct dev_power_governor *gov, bool is_off) |
| { |
| if (IS_ERR_OR_NULL(genpd)) |
| return; |
| |
| INIT_LIST_HEAD(&genpd->master_links); |
| INIT_LIST_HEAD(&genpd->slave_links); |
| INIT_LIST_HEAD(&genpd->dev_list); |
| mutex_init(&genpd->lock); |
| genpd->gov = gov; |
| INIT_WORK(&genpd->power_off_work, genpd_power_off_work_fn); |
| genpd->in_progress = 0; |
| atomic_set(&genpd->sd_count, 0); |
| genpd->status = is_off ? GPD_STATE_POWER_OFF : GPD_STATE_ACTIVE; |
| init_waitqueue_head(&genpd->status_wait_queue); |
| genpd->poweroff_task = NULL; |
| genpd->resume_count = 0; |
| genpd->device_count = 0; |
| genpd->suspended_count = 0; |
| genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend; |
| genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume; |
| genpd->domain.ops.runtime_idle = pm_generic_runtime_idle; |
| genpd->domain.ops.prepare = pm_genpd_prepare; |
| genpd->domain.ops.suspend = pm_genpd_suspend; |
| genpd->domain.ops.suspend_noirq = pm_genpd_suspend_noirq; |
| genpd->domain.ops.resume_noirq = pm_genpd_resume_noirq; |
| genpd->domain.ops.resume = pm_genpd_resume; |
| genpd->domain.ops.freeze = pm_genpd_freeze; |
| genpd->domain.ops.freeze_noirq = pm_genpd_freeze_noirq; |
| genpd->domain.ops.thaw_noirq = pm_genpd_thaw_noirq; |
| genpd->domain.ops.thaw = pm_genpd_thaw; |
| genpd->domain.ops.poweroff = pm_genpd_dev_poweroff; |
| genpd->domain.ops.poweroff_noirq = pm_genpd_dev_poweroff_noirq; |
| genpd->domain.ops.restore_noirq = pm_genpd_restore_noirq; |
| genpd->domain.ops.restore = pm_genpd_restore; |
| genpd->domain.ops.complete = pm_genpd_complete; |
| mutex_lock(&gpd_list_lock); |
| list_add(&genpd->gpd_list_node, &gpd_list); |
| mutex_unlock(&gpd_list_lock); |
| } |