| menu "RealView platform type" |
| depends on ARCH_REALVIEW |
| |
| config MACH_REALVIEW_EB |
| bool "Support RealView(R) Emulation Baseboard" |
| select ARM_GIC |
| help |
| Include support for the ARM(R) RealView(R) Emulation Baseboard |
| platform. |
| |
| config REALVIEW_EB_A9MP |
| bool "Support Multicore Cortex-A9 Tile" |
| depends on MACH_REALVIEW_EB |
| select CPU_V7 |
| help |
| Enable support for the Cortex-A9MPCore tile fitted to the |
| Realview(R) Emulation Baseboard platform. |
| |
| config REALVIEW_EB_ARM11MP |
| bool "Support ARM11MPCore Tile" |
| depends on MACH_REALVIEW_EB |
| select CPU_V6K |
| select ARCH_HAS_BARRIERS if SMP |
| help |
| Enable support for the ARM11MPCore tile fitted to the Realview(R) |
| Emulation Baseboard platform. |
| |
| config REALVIEW_EB_ARM11MP_REVB |
| bool "Support ARM11MPCore RevB Tile" |
| depends on REALVIEW_EB_ARM11MP |
| help |
| Enable support for the ARM11MPCore Revision B tile on the |
| Realview(R) Emulation Baseboard platform. Since there are device |
| address differences, a kernel built with this option enabled is |
| not compatible with other revisions of the ARM11MPCore tile. |
| |
| config MACH_REALVIEW_PB11MP |
| bool "Support RealView(R) Platform Baseboard for ARM11MPCore" |
| select CPU_V6K |
| select ARM_GIC |
| select HAVE_PATA_PLATFORM |
| select ARCH_HAS_BARRIERS if SMP |
| help |
| Include support for the ARM(R) RealView(R) Platform Baseboard for |
| the ARM11MPCore. This platform has an on-board ARM11MPCore and has |
| support for PCI-E and Compact Flash. |
| |
| # ARMv6 CPU without K extensions, but does have the new exclusive ops |
| config MACH_REALVIEW_PB1176 |
| bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" |
| select CPU_V6 |
| select ARM_GIC |
| select HAVE_TCM |
| help |
| Include support for the ARM(R) RealView(R) Platform Baseboard for |
| ARM1176JZF-S. |
| |
| config REALVIEW_PB1176_SECURE_FLASH |
| bool "Allow access to the secure flash memory block" |
| depends on MACH_REALVIEW_PB1176 |
| default n |
| help |
| Select this option if Linux will only run in secure mode on the |
| RealView PB1176 platform and access to the secure flash memory |
| block (64MB @ 0x3c000000) is required. |
| |
| config MACH_REALVIEW_PBA8 |
| bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform" |
| select CPU_V7 |
| select ARM_GIC |
| select HAVE_PATA_PLATFORM |
| help |
| Include support for the ARM(R) RealView Platform Baseboard for |
| Cortex(tm)-A8. This platform has an on-board Cortex-A8 and has |
| support for PCI-E and Compact Flash. |
| |
| config MACH_REALVIEW_PBX |
| bool "Support RealView(R) Platform Baseboard Explore" |
| select ARM_GIC |
| select HAVE_PATA_PLATFORM |
| select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET |
| select ZONE_DMA if SPARSEMEM |
| help |
| Include support for the ARM(R) RealView(R) Platform Baseboard |
| Explore. |
| |
| config REALVIEW_HIGH_PHYS_OFFSET |
| bool "High physical base address for the RealView platform" |
| depends on MMU && !MACH_REALVIEW_PB1176 |
| default y |
| help |
| RealView boards other than PB1176 have the RAM available at |
| 0x70000000, 256MB of which being mirrored at 0x00000000. If |
| the board supports 512MB of RAM, this option allows the |
| memory to be accessed contiguously at the high physical |
| offset. On the PBX board, disabling this option allows 1GB of |
| RAM to be used with SPARSEMEM. |
| |
| endmenu |
