| /* fuc microcode for nvc0 PGRAPH/HUB |
| * |
| * Copyright 2011 Red Hat Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: Ben Skeggs |
| */ |
| |
| /* To build: |
| * m4 nvc0_grhub.fuc | envyas -a -w -m fuc -V nva3 -o nvc0_grhub.fuc.h |
| */ |
| |
| .section nvc0_grhub_data |
| include(`nvc0_graph.fuc') |
| gpc_count: .b32 0 |
| rop_count: .b32 0 |
| cmd_queue: queue_init |
| hub_mmio_list_head: .b32 0 |
| hub_mmio_list_tail: .b32 0 |
| |
| ctx_current: .b32 0 |
| |
| chipsets: |
| .b8 0xc0 0 0 0 |
| .b16 nvc0_hub_mmio_head |
| .b16 nvc0_hub_mmio_tail |
| .b8 0xc1 0 0 0 |
| .b16 nvc0_hub_mmio_head |
| .b16 nvc1_hub_mmio_tail |
| .b8 0xc3 0 0 0 |
| .b16 nvc0_hub_mmio_head |
| .b16 nvc0_hub_mmio_tail |
| .b8 0xc4 0 0 0 |
| .b16 nvc0_hub_mmio_head |
| .b16 nvc0_hub_mmio_tail |
| .b8 0xc8 0 0 0 |
| .b16 nvc0_hub_mmio_head |
| .b16 nvc0_hub_mmio_tail |
| .b8 0xce 0 0 0 |
| .b16 nvc0_hub_mmio_head |
| .b16 nvc0_hub_mmio_tail |
| .b8 0xcf 0 0 0 |
| .b16 nvc0_hub_mmio_head |
| .b16 nvc0_hub_mmio_tail |
| .b8 0 0 0 0 |
| |
| nvc0_hub_mmio_head: |
| mmctx_data(0x17e91c, 2) |
| mmctx_data(0x400204, 2) |
| mmctx_data(0x404004, 11) |
| mmctx_data(0x404044, 1) |
| mmctx_data(0x404094, 14) |
| mmctx_data(0x4040d0, 7) |
| mmctx_data(0x4040f8, 1) |
| mmctx_data(0x404130, 3) |
| mmctx_data(0x404150, 3) |
| mmctx_data(0x404164, 2) |
| mmctx_data(0x404174, 3) |
| mmctx_data(0x404200, 8) |
| mmctx_data(0x404404, 14) |
| mmctx_data(0x404460, 4) |
| mmctx_data(0x404480, 1) |
| mmctx_data(0x404498, 1) |
| mmctx_data(0x404604, 4) |
| mmctx_data(0x404618, 32) |
| mmctx_data(0x404698, 21) |
| mmctx_data(0x4046f0, 2) |
| mmctx_data(0x404700, 22) |
| mmctx_data(0x405800, 1) |
| mmctx_data(0x405830, 3) |
| mmctx_data(0x405854, 1) |
| mmctx_data(0x405870, 4) |
| mmctx_data(0x405a00, 2) |
| mmctx_data(0x405a18, 1) |
| mmctx_data(0x406020, 1) |
| mmctx_data(0x406028, 4) |
| mmctx_data(0x4064a8, 2) |
| mmctx_data(0x4064b4, 2) |
| mmctx_data(0x407804, 1) |
| mmctx_data(0x40780c, 6) |
| mmctx_data(0x4078bc, 1) |
| mmctx_data(0x408000, 7) |
| mmctx_data(0x408064, 1) |
| mmctx_data(0x408800, 3) |
| mmctx_data(0x408900, 4) |
| mmctx_data(0x408980, 1) |
| nvc0_hub_mmio_tail: |
| mmctx_data(0x4064c0, 2) |
| nvc1_hub_mmio_tail: |
| |
| .align 256 |
| chan_data: |
| chan_mmio_count: .b32 0 |
| chan_mmio_address: .b32 0 |
| |
| .align 256 |
| xfer_data: .b32 0 |
| |
| .section nvc0_grhub_code |
| bra init |
| define(`include_code') |
| include(`nvc0_graph.fuc') |
| |
| // reports an exception to the host |
| // |
| // In: $r15 error code (see nvc0_graph.fuc) |
| // |
| error: |
| push $r14 |
| mov $r14 0x814 |
| shl b32 $r14 6 |
| iowr I[$r14 + 0x000] $r15 // CC_SCRATCH[5] = error code |
| mov $r14 0xc1c |
| shl b32 $r14 6 |
| mov $r15 1 |
| iowr I[$r14 + 0x000] $r15 // INTR_UP_SET |
| pop $r14 |
| ret |
| |
| // HUB fuc initialisation, executed by triggering ucode start, will |
| // fall through to main loop after completion. |
| // |
| // Input: |
| // CC_SCRATCH[0]: chipset (PMC_BOOT_0 read returns 0x0bad0bad... sigh) |
| // |
| // Output: |
| // CC_SCRATCH[0]: |
| // 31:31: set to signal completion |
| // CC_SCRATCH[1]: |
| // 31:0: total PGRAPH context size |
| // |
| init: |
| clear b32 $r0 |
| mov $sp $r0 |
| mov $xdbase $r0 |
| |
| // enable fifo access |
| mov $r1 0x1200 |
| mov $r2 2 |
| iowr I[$r1 + 0x000] $r2 // FIFO_ENABLE |
| |
| // setup i0 handler, and route all interrupts to it |
| mov $r1 ih |
| mov $iv0 $r1 |
| mov $r1 0x400 |
| iowr I[$r1 + 0x300] $r0 // INTR_DISPATCH |
| |
| // route HUB_CHANNEL_SWITCH to fuc interrupt 8 |
| mov $r3 0x404 |
| shl b32 $r3 6 |
| mov $r2 0x2003 // { HUB_CHANNEL_SWITCH, ZERO } -> intr 8 |
| iowr I[$r3 + 0x000] $r2 |
| |
| // not sure what these are, route them because NVIDIA does, and |
| // the IRQ handler will signal the host if we ever get one.. we |
| // may find out if/why we need to handle these if so.. |
| // |
| mov $r2 0x2004 |
| iowr I[$r3 + 0x004] $r2 // { 0x04, ZERO } -> intr 9 |
| mov $r2 0x200b |
| iowr I[$r3 + 0x008] $r2 // { 0x0b, ZERO } -> intr 10 |
| mov $r2 0x200c |
| iowr I[$r3 + 0x01c] $r2 // { 0x0c, ZERO } -> intr 15 |
| |
| // enable all INTR_UP interrupts |
| mov $r2 0xc24 |
| shl b32 $r2 6 |
| not b32 $r3 $r0 |
| iowr I[$r2] $r3 |
| |
| // enable fifo, ctxsw, 9, 10, 15 interrupts |
| mov $r2 -0x78fc // 0x8704 |
| sethi $r2 0 |
| iowr I[$r1 + 0x000] $r2 // INTR_EN_SET |
| |
| // fifo level triggered, rest edge |
| sub b32 $r1 0x100 |
| mov $r2 4 |
| iowr I[$r1] $r2 |
| |
| // enable interrupts |
| bset $flags ie0 |
| |
| // fetch enabled GPC/ROP counts |
| mov $r14 -0x69fc // 0x409604 |
| sethi $r14 0x400000 |
| call nv_rd32 |
| extr $r1 $r15 16:20 |
| st b32 D[$r0 + rop_count] $r1 |
| and $r15 0x1f |
| st b32 D[$r0 + gpc_count] $r15 |
| |
| // set BAR_REQMASK to GPC mask |
| mov $r1 1 |
| shl b32 $r1 $r15 |
| sub b32 $r1 1 |
| mov $r2 0x40c |
| shl b32 $r2 6 |
| iowr I[$r2 + 0x000] $r1 |
| iowr I[$r2 + 0x100] $r1 |
| |
| // find context data for this chipset |
| mov $r2 0x800 |
| shl b32 $r2 6 |
| iord $r2 I[$r2 + 0x000] // CC_SCRATCH[0] |
| mov $r15 chipsets - 8 |
| init_find_chipset: |
| add b32 $r15 8 |
| ld b32 $r3 D[$r15 + 0x00] |
| cmpu b32 $r3 $r2 |
| bra e init_context |
| cmpu b32 $r3 0 |
| bra ne init_find_chipset |
| // unknown chipset |
| ret |
| |
| // context size calculation, reserve first 256 bytes for use by fuc |
| init_context: |
| mov $r1 256 |
| |
| // calculate size of mmio context data |
| ld b16 $r14 D[$r15 + 4] |
| ld b16 $r15 D[$r15 + 6] |
| sethi $r14 0 |
| st b32 D[$r0 + hub_mmio_list_head] $r14 |
| st b32 D[$r0 + hub_mmio_list_tail] $r15 |
| call mmctx_size |
| |
| // set mmctx base addresses now so we don't have to do it later, |
| // they don't (currently) ever change |
| mov $r3 0x700 |
| shl b32 $r3 6 |
| shr b32 $r4 $r1 8 |
| iowr I[$r3 + 0x000] $r4 // MMCTX_SAVE_SWBASE |
| iowr I[$r3 + 0x100] $r4 // MMCTX_LOAD_SWBASE |
| add b32 $r3 0x1300 |
| add b32 $r1 $r15 |
| shr b32 $r15 2 |
| iowr I[$r3 + 0x000] $r15 // MMCTX_LOAD_COUNT, wtf for?!? |
| |
| // strands, base offset needs to be aligned to 256 bytes |
| shr b32 $r1 8 |
| add b32 $r1 1 |
| shl b32 $r1 8 |
| mov b32 $r15 $r1 |
| call strand_ctx_init |
| add b32 $r1 $r15 |
| |
| // initialise each GPC in sequence by passing in the offset of its |
| // context data in GPCn_CC_SCRATCH[1], and starting its FUC (which |
| // has previously been uploaded by the host) running. |
| // |
| // the GPC fuc init sequence will set GPCn_CC_SCRATCH[0] bit 31 |
| // when it has completed, and return the size of its context data |
| // in GPCn_CC_SCRATCH[1] |
| // |
| ld b32 $r3 D[$r0 + gpc_count] |
| mov $r4 0x2000 |
| sethi $r4 0x500000 |
| init_gpc: |
| // setup, and start GPC ucode running |
| add b32 $r14 $r4 0x804 |
| mov b32 $r15 $r1 |
| call nv_wr32 // CC_SCRATCH[1] = ctx offset |
| add b32 $r14 $r4 0x800 |
| mov b32 $r15 $r2 |
| call nv_wr32 // CC_SCRATCH[0] = chipset |
| add b32 $r14 $r4 0x10c |
| clear b32 $r15 |
| call nv_wr32 |
| add b32 $r14 $r4 0x104 |
| call nv_wr32 // ENTRY |
| add b32 $r14 $r4 0x100 |
| mov $r15 2 // CTRL_START_TRIGGER |
| call nv_wr32 // CTRL |
| |
| // wait for it to complete, and adjust context size |
| add b32 $r14 $r4 0x800 |
| init_gpc_wait: |
| call nv_rd32 |
| xbit $r15 $r15 31 |
| bra e init_gpc_wait |
| add b32 $r14 $r4 0x804 |
| call nv_rd32 |
| add b32 $r1 $r15 |
| |
| // next! |
| add b32 $r4 0x8000 |
| sub b32 $r3 1 |
| bra ne init_gpc |
| |
| // save context size, and tell host we're ready |
| mov $r2 0x800 |
| shl b32 $r2 6 |
| iowr I[$r2 + 0x100] $r1 // CC_SCRATCH[1] = context size |
| add b32 $r2 0x800 |
| clear b32 $r1 |
| bset $r1 31 |
| iowr I[$r2 + 0x000] $r1 // CC_SCRATCH[0] |= 0x80000000 |
| |
| // Main program loop, very simple, sleeps until woken up by the interrupt |
| // handler, pulls a command from the queue and executes its handler |
| // |
| main: |
| // sleep until we have something to do |
| bset $flags $p0 |
| sleep $p0 |
| mov $r13 cmd_queue |
| call queue_get |
| bra $p1 main |
| |
| // context switch, requested by GPU? |
| cmpu b32 $r14 0x4001 |
| bra ne main_not_ctx_switch |
| trace_set(T_AUTO) |
| mov $r1 0xb00 |
| shl b32 $r1 6 |
| iord $r2 I[$r1 + 0x100] // CHAN_NEXT |
| iord $r1 I[$r1 + 0x000] // CHAN_CUR |
| |
| xbit $r3 $r1 31 |
| bra e chsw_no_prev |
| xbit $r3 $r2 31 |
| bra e chsw_prev_no_next |
| push $r2 |
| mov b32 $r2 $r1 |
| trace_set(T_SAVE) |
| bclr $flags $p1 |
| bset $flags $p2 |
| call ctx_xfer |
| trace_clr(T_SAVE); |
| pop $r2 |
| trace_set(T_LOAD); |
| bset $flags $p1 |
| call ctx_xfer |
| trace_clr(T_LOAD); |
| bra chsw_done |
| chsw_prev_no_next: |
| push $r2 |
| mov b32 $r2 $r1 |
| bclr $flags $p1 |
| bclr $flags $p2 |
| call ctx_xfer |
| pop $r2 |
| mov $r1 0xb00 |
| shl b32 $r1 6 |
| iowr I[$r1] $r2 |
| bra chsw_done |
| chsw_no_prev: |
| xbit $r3 $r2 31 |
| bra e chsw_done |
| bset $flags $p1 |
| bclr $flags $p2 |
| call ctx_xfer |
| |
| // ack the context switch request |
| chsw_done: |
| mov $r1 0xb0c |
| shl b32 $r1 6 |
| mov $r2 1 |
| iowr I[$r1 + 0x000] $r2 // 0x409b0c |
| trace_clr(T_AUTO) |
| bra main |
| |
| // request to set current channel? (*not* a context switch) |
| main_not_ctx_switch: |
| cmpu b32 $r14 0x0001 |
| bra ne main_not_ctx_chan |
| mov b32 $r2 $r15 |
| call ctx_chan |
| bra main_done |
| |
| // request to store current channel context? |
| main_not_ctx_chan: |
| cmpu b32 $r14 0x0002 |
| bra ne main_not_ctx_save |
| trace_set(T_SAVE) |
| bclr $flags $p1 |
| bclr $flags $p2 |
| call ctx_xfer |
| trace_clr(T_SAVE) |
| bra main_done |
| |
| main_not_ctx_save: |
| shl b32 $r15 $r14 16 |
| or $r15 E_BAD_COMMAND |
| call error |
| bra main |
| |
| main_done: |
| mov $r1 0x820 |
| shl b32 $r1 6 |
| clear b32 $r2 |
| bset $r2 31 |
| iowr I[$r1 + 0x000] $r2 // CC_SCRATCH[0] |= 0x80000000 |
| bra main |
| |
| // interrupt handler |
| ih: |
| push $r8 |
| mov $r8 $flags |
| push $r8 |
| push $r9 |
| push $r10 |
| push $r11 |
| push $r13 |
| push $r14 |
| push $r15 |
| |
| // incoming fifo command? |
| iord $r10 I[$r0 + 0x200] // INTR |
| and $r11 $r10 0x00000004 |
| bra e ih_no_fifo |
| // queue incoming fifo command for later processing |
| mov $r11 0x1900 |
| mov $r13 cmd_queue |
| iord $r14 I[$r11 + 0x100] // FIFO_CMD |
| iord $r15 I[$r11 + 0x000] // FIFO_DATA |
| call queue_put |
| add b32 $r11 0x400 |
| mov $r14 1 |
| iowr I[$r11 + 0x000] $r14 // FIFO_ACK |
| |
| // context switch request? |
| ih_no_fifo: |
| and $r11 $r10 0x00000100 |
| bra e ih_no_ctxsw |
| // enqueue a context switch for later processing |
| mov $r13 cmd_queue |
| mov $r14 0x4001 |
| call queue_put |
| |
| // anything we didn't handle, bring it to the host's attention |
| ih_no_ctxsw: |
| mov $r11 0x104 |
| not b32 $r11 |
| and $r11 $r10 $r11 |
| bra e ih_no_other |
| mov $r10 0xc1c |
| shl b32 $r10 6 |
| iowr I[$r10] $r11 // INTR_UP_SET |
| |
| // ack, and wake up main() |
| ih_no_other: |
| iowr I[$r0 + 0x100] $r10 // INTR_ACK |
| |
| pop $r15 |
| pop $r14 |
| pop $r13 |
| pop $r11 |
| pop $r10 |
| pop $r9 |
| pop $r8 |
| mov $flags $r8 |
| pop $r8 |
| bclr $flags $p0 |
| iret |
| |
| // Not real sure, but, MEM_CMD 7 will hang forever if this isn't done |
| ctx_4160s: |
| mov $r14 0x4160 |
| sethi $r14 0x400000 |
| mov $r15 1 |
| call nv_wr32 |
| ctx_4160s_wait: |
| call nv_rd32 |
| xbit $r15 $r15 4 |
| bra e ctx_4160s_wait |
| ret |
| |
| // Without clearing again at end of xfer, some things cause PGRAPH |
| // to hang with STATUS=0x00000007 until it's cleared.. fbcon can |
| // still function with it set however... |
| ctx_4160c: |
| mov $r14 0x4160 |
| sethi $r14 0x400000 |
| clear b32 $r15 |
| call nv_wr32 |
| ret |
| |
| // Again, not real sure |
| // |
| // In: $r15 value to set 0x404170 to |
| // |
| ctx_4170s: |
| mov $r14 0x4170 |
| sethi $r14 0x400000 |
| or $r15 0x10 |
| call nv_wr32 |
| ret |
| |
| // Waits for a ctx_4170s() call to complete |
| // |
| ctx_4170w: |
| mov $r14 0x4170 |
| sethi $r14 0x400000 |
| call nv_rd32 |
| and $r15 0x10 |
| bra ne ctx_4170w |
| ret |
| |
| // Disables various things, waits a bit, and re-enables them.. |
| // |
| // Not sure how exactly this helps, perhaps "ENABLE" is not such a |
| // good description for the bits we turn off? Anyways, without this, |
| // funny things happen. |
| // |
| ctx_redswitch: |
| mov $r14 0x614 |
| shl b32 $r14 6 |
| mov $r15 0x270 |
| iowr I[$r14] $r15 // HUB_RED_SWITCH = ENABLE_GPC, POWER_ALL |
| mov $r15 8 |
| ctx_redswitch_delay: |
| sub b32 $r15 1 |
| bra ne ctx_redswitch_delay |
| mov $r15 0x770 |
| iowr I[$r14] $r15 // HUB_RED_SWITCH = ENABLE_ALL, POWER_ALL |
| ret |
| |
| // Not a clue what this is for, except that unless the value is 0x10, the |
| // strand context is saved (and presumably restored) incorrectly.. |
| // |
| // In: $r15 value to set to (0x00/0x10 are used) |
| // |
| ctx_86c: |
| mov $r14 0x86c |
| shl b32 $r14 6 |
| iowr I[$r14] $r15 // HUB(0x86c) = val |
| mov $r14 -0x75ec |
| sethi $r14 0x400000 |
| call nv_wr32 // ROP(0xa14) = val |
| mov $r14 -0x5794 |
| sethi $r14 0x410000 |
| call nv_wr32 // GPC(0x86c) = val |
| ret |
| |
| // ctx_load - load's a channel's ctxctl data, and selects its vm |
| // |
| // In: $r2 channel address |
| // |
| ctx_load: |
| trace_set(T_CHAN) |
| |
| // switch to channel, somewhat magic in parts.. |
| mov $r10 12 // DONE_UNK12 |
| call wait_donez |
| mov $r1 0xa24 |
| shl b32 $r1 6 |
| iowr I[$r1 + 0x000] $r0 // 0x409a24 |
| mov $r3 0xb00 |
| shl b32 $r3 6 |
| iowr I[$r3 + 0x100] $r2 // CHAN_NEXT |
| mov $r1 0xa0c |
| shl b32 $r1 6 |
| mov $r4 7 |
| iowr I[$r1 + 0x000] $r2 // MEM_CHAN |
| iowr I[$r1 + 0x100] $r4 // MEM_CMD |
| ctx_chan_wait_0: |
| iord $r4 I[$r1 + 0x100] |
| and $r4 0x1f |
| bra ne ctx_chan_wait_0 |
| iowr I[$r3 + 0x000] $r2 // CHAN_CUR |
| |
| // load channel header, fetch PGRAPH context pointer |
| mov $xtargets $r0 |
| bclr $r2 31 |
| shl b32 $r2 4 |
| add b32 $r2 2 |
| |
| trace_set(T_LCHAN) |
| mov $r1 0xa04 |
| shl b32 $r1 6 |
| iowr I[$r1 + 0x000] $r2 // MEM_BASE |
| mov $r1 0xa20 |
| shl b32 $r1 6 |
| mov $r2 0x0002 |
| sethi $r2 0x80000000 |
| iowr I[$r1 + 0x000] $r2 // MEM_TARGET = vram |
| mov $r1 0x10 // chan + 0x0210 |
| mov $r2 xfer_data |
| sethi $r2 0x00020000 // 16 bytes |
| xdld $r1 $r2 |
| xdwait |
| trace_clr(T_LCHAN) |
| |
| // update current context |
| ld b32 $r1 D[$r0 + xfer_data + 4] |
| shl b32 $r1 24 |
| ld b32 $r2 D[$r0 + xfer_data + 0] |
| shr b32 $r2 8 |
| or $r1 $r2 |
| st b32 D[$r0 + ctx_current] $r1 |
| |
| // set transfer base to start of context, and fetch context header |
| trace_set(T_LCTXH) |
| mov $r2 0xa04 |
| shl b32 $r2 6 |
| iowr I[$r2 + 0x000] $r1 // MEM_BASE |
| mov $r2 1 |
| mov $r1 0xa20 |
| shl b32 $r1 6 |
| iowr I[$r1 + 0x000] $r2 // MEM_TARGET = vm |
| mov $r1 chan_data |
| sethi $r1 0x00060000 // 256 bytes |
| xdld $r0 $r1 |
| xdwait |
| trace_clr(T_LCTXH) |
| |
| trace_clr(T_CHAN) |
| ret |
| |
| // ctx_chan - handler for HUB_SET_CHAN command, will set a channel as |
| // the active channel for ctxctl, but not actually transfer |
| // any context data. intended for use only during initial |
| // context construction. |
| // |
| // In: $r2 channel address |
| // |
| ctx_chan: |
| call ctx_4160s |
| call ctx_load |
| mov $r10 12 // DONE_UNK12 |
| call wait_donez |
| mov $r1 0xa10 |
| shl b32 $r1 6 |
| mov $r2 5 |
| iowr I[$r1 + 0x000] $r2 // MEM_CMD = 5 (???) |
| ctx_chan_wait: |
| iord $r2 I[$r1 + 0x000] |
| or $r2 $r2 |
| bra ne ctx_chan_wait |
| call ctx_4160c |
| ret |
| |
| // Execute per-context state overrides list |
| // |
| // Only executed on the first load of a channel. Might want to look into |
| // removing this and having the host directly modify the channel's context |
| // to change this state... The nouveau DRM already builds this list as |
| // it's definitely needed for NVIDIA's, so we may as well use it for now |
| // |
| // Input: $r1 mmio list length |
| // |
| ctx_mmio_exec: |
| // set transfer base to be the mmio list |
| ld b32 $r3 D[$r0 + chan_mmio_address] |
| mov $r2 0xa04 |
| shl b32 $r2 6 |
| iowr I[$r2 + 0x000] $r3 // MEM_BASE |
| |
| clear b32 $r3 |
| ctx_mmio_loop: |
| // fetch next 256 bytes of mmio list if necessary |
| and $r4 $r3 0xff |
| bra ne ctx_mmio_pull |
| mov $r5 xfer_data |
| sethi $r5 0x00060000 // 256 bytes |
| xdld $r3 $r5 |
| xdwait |
| |
| // execute a single list entry |
| ctx_mmio_pull: |
| ld b32 $r14 D[$r4 + xfer_data + 0x00] |
| ld b32 $r15 D[$r4 + xfer_data + 0x04] |
| call nv_wr32 |
| |
| // next! |
| add b32 $r3 8 |
| sub b32 $r1 1 |
| bra ne ctx_mmio_loop |
| |
| // set transfer base back to the current context |
| ctx_mmio_done: |
| ld b32 $r3 D[$r0 + ctx_current] |
| iowr I[$r2 + 0x000] $r3 // MEM_BASE |
| |
| // disable the mmio list now, we don't need/want to execute it again |
| st b32 D[$r0 + chan_mmio_count] $r0 |
| mov $r1 chan_data |
| sethi $r1 0x00060000 // 256 bytes |
| xdst $r0 $r1 |
| xdwait |
| ret |
| |
| // Transfer HUB context data between GPU and storage area |
| // |
| // In: $r2 channel address |
| // $p1 clear on save, set on load |
| // $p2 set if opposite direction done/will be done, so: |
| // on save it means: "a load will follow this save" |
| // on load it means: "a save preceeded this load" |
| // |
| ctx_xfer: |
| bra not $p1 ctx_xfer_pre |
| bra $p2 ctx_xfer_pre_load |
| ctx_xfer_pre: |
| mov $r15 0x10 |
| call ctx_86c |
| call ctx_4160s |
| bra not $p1 ctx_xfer_exec |
| |
| ctx_xfer_pre_load: |
| mov $r15 2 |
| call ctx_4170s |
| call ctx_4170w |
| call ctx_redswitch |
| clear b32 $r15 |
| call ctx_4170s |
| call ctx_load |
| |
| // fetch context pointer, and initiate xfer on all GPCs |
| ctx_xfer_exec: |
| ld b32 $r1 D[$r0 + ctx_current] |
| mov $r2 0x414 |
| shl b32 $r2 6 |
| iowr I[$r2 + 0x000] $r0 // BAR_STATUS = reset |
| mov $r14 -0x5b00 |
| sethi $r14 0x410000 |
| mov b32 $r15 $r1 |
| call nv_wr32 // GPC_BCAST_WRCMD_DATA = ctx pointer |
| add b32 $r14 4 |
| xbit $r15 $flags $p1 |
| xbit $r2 $flags $p2 |
| shl b32 $r2 1 |
| or $r15 $r2 |
| call nv_wr32 // GPC_BCAST_WRCMD_CMD = GPC_XFER(type) |
| |
| // strands |
| mov $r1 0x4afc |
| sethi $r1 0x20000 |
| mov $r2 0xc |
| iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x0c |
| call strand_wait |
| mov $r2 0x47fc |
| sethi $r2 0x20000 |
| iowr I[$r2] $r0 // STRAND_FIRST_GENE(0x3f) = 0x00 |
| xbit $r2 $flags $p1 |
| add b32 $r2 3 |
| iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x03/0x04 (SAVE/LOAD) |
| |
| // mmio context |
| xbit $r10 $flags $p1 // direction |
| or $r10 6 // first, last |
| mov $r11 0 // base = 0 |
| ld b32 $r12 D[$r0 + hub_mmio_list_head] |
| ld b32 $r13 D[$r0 + hub_mmio_list_tail] |
| mov $r14 0 // not multi |
| call mmctx_xfer |
| |
| // wait for GPCs to all complete |
| mov $r10 8 // DONE_BAR |
| call wait_doneo |
| |
| // wait for strand xfer to complete |
| call strand_wait |
| |
| // post-op |
| bra $p1 ctx_xfer_post |
| mov $r10 12 // DONE_UNK12 |
| call wait_donez |
| mov $r1 0xa10 |
| shl b32 $r1 6 |
| mov $r2 5 |
| iowr I[$r1] $r2 // MEM_CMD |
| ctx_xfer_post_save_wait: |
| iord $r2 I[$r1] |
| or $r2 $r2 |
| bra ne ctx_xfer_post_save_wait |
| |
| bra $p2 ctx_xfer_done |
| ctx_xfer_post: |
| mov $r15 2 |
| call ctx_4170s |
| clear b32 $r15 |
| call ctx_86c |
| call strand_post |
| call ctx_4170w |
| clear b32 $r15 |
| call ctx_4170s |
| |
| bra not $p1 ctx_xfer_no_post_mmio |
| ld b32 $r1 D[$r0 + chan_mmio_count] |
| or $r1 $r1 |
| bra e ctx_xfer_no_post_mmio |
| call ctx_mmio_exec |
| |
| ctx_xfer_no_post_mmio: |
| call ctx_4160c |
| |
| ctx_xfer_done: |
| ret |
| |
| .align 256 |
