| /* |
| * MIMC200 board-specific flash initialization |
| * |
| * Copyright (C) 2008 Mercury IMC Ltd |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/mtd/physmap.h> |
| |
| #include <mach/smc.h> |
| |
| static struct smc_timing flash_timing __initdata = { |
| .ncs_read_setup = 0, |
| .nrd_setup = 15, |
| .ncs_write_setup = 0, |
| .nwe_setup = 0, |
| |
| .ncs_read_pulse = 115, |
| .nrd_pulse = 110, |
| .ncs_write_pulse = 60, |
| .nwe_pulse = 60, |
| |
| .read_cycle = 115, |
| .write_cycle = 100, |
| }; |
| |
| static struct smc_config flash_config __initdata = { |
| .bus_width = 2, |
| .nrd_controlled = 1, |
| .nwe_controlled = 1, |
| .byte_write = 1, |
| }; |
| |
| /* system flash definition */ |
| |
| static struct mtd_partition flash_parts_system[] = { |
| { |
| .name = "u-boot", |
| .offset = 0x00000000, |
| .size = 0x00020000, /* 128 KiB */ |
| .mask_flags = MTD_WRITEABLE, |
| }, |
| { |
| .name = "root", |
| .offset = 0x00020000, |
| .size = 0x007c0000, |
| }, |
| { |
| .name = "splash", |
| .offset = 0x007e0000, |
| .size = 0x00010000, /* 64KiB */ |
| }, |
| { |
| .name = "env", |
| .offset = 0x007f0000, |
| .size = 0x00010000, |
| .mask_flags = MTD_WRITEABLE, |
| }, |
| }; |
| |
| static struct physmap_flash_data flash_system = { |
| .width = 2, |
| .nr_parts = ARRAY_SIZE(flash_parts_system), |
| .parts = flash_parts_system, |
| }; |
| |
| static struct resource flash_resource_system = { |
| .start = 0x00000000, |
| .end = 0x007fffff, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct platform_device flash_device_system = { |
| .name = "physmap-flash", |
| .id = 0, |
| .resource = &flash_resource_system, |
| .num_resources = 1, |
| .dev = { |
| .platform_data = &flash_system, |
| }, |
| }; |
| |
| /* data flash definition */ |
| |
| static struct mtd_partition flash_parts_data[] = { |
| { |
| .name = "data", |
| .offset = 0x00000000, |
| .size = 0x00800000, |
| }, |
| }; |
| |
| static struct physmap_flash_data flash_data = { |
| .width = 2, |
| .nr_parts = ARRAY_SIZE(flash_parts_data), |
| .parts = flash_parts_data, |
| }; |
| |
| static struct resource flash_resource_data = { |
| .start = 0x08000000, |
| .end = 0x087fffff, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct platform_device flash_device_data = { |
| .name = "physmap-flash", |
| .id = 1, |
| .resource = &flash_resource_data, |
| .num_resources = 1, |
| .dev = { |
| .platform_data = &flash_data, |
| }, |
| }; |
| |
| /* This needs to be called after the SMC has been initialized */ |
| static int __init mimc200_flash_init(void) |
| { |
| int ret; |
| |
| smc_set_timing(&flash_config, &flash_timing); |
| ret = smc_set_configuration(0, &flash_config); |
| if (ret < 0) { |
| printk(KERN_ERR "mimc200: failed to set 'System' NOR flash timing\n"); |
| return ret; |
| } |
| ret = smc_set_configuration(1, &flash_config); |
| if (ret < 0) { |
| printk(KERN_ERR "mimc200: failed to set 'Data' NOR flash timing\n"); |
| return ret; |
| } |
| |
| platform_device_register(&flash_device_system); |
| platform_device_register(&flash_device_data); |
| |
| return 0; |
| } |
| device_initcall(mimc200_flash_init); |