| Kernel driver max8688 |
| ===================== |
| |
| Supported chips: |
| * National Semiconductor LM25066 |
| Prefix: 'lm25066' |
| Addresses scanned: - |
| Datasheets: |
| http://www.national.com/pf/LM/LM25066.html |
| http://www.national.com/pf/LM/LM25066A.html |
| * National Semiconductor LM5064 |
| Prefix: 'lm5064' |
| Addresses scanned: - |
| Datasheet: |
| http://www.national.com/pf/LM/LM5064.html |
| * National Semiconductor LM5066 |
| Prefix: 'lm5066' |
| Addresses scanned: - |
| Datasheet: |
| http://www.national.com/pf/LM/LM5066.html |
| |
| Author: Guenter Roeck <guenter.roeck@ericsson.com> |
| |
| |
| Description |
| ----------- |
| |
| This driver supports hardware montoring for National Semiconductor LM25066, |
| LM5064, and LM5064 Power Management, Monitoring, Control, and Protection ICs. |
| |
| The driver is a client driver to the core PMBus driver. Please see |
| Documentation/hwmon/pmbus for details on PMBus client drivers. |
| |
| |
| Usage Notes |
| ----------- |
| |
| This driver does not auto-detect devices. You will have to instantiate the |
| devices explicitly. Please see Documentation/i2c/instantiating-devices for |
| details. |
| |
| |
| Platform data support |
| --------------------- |
| |
| The driver supports standard PMBus driver platform data. |
| |
| |
| Sysfs entries |
| ------------- |
| |
| The following attributes are supported. Limits are read-write; all other |
| attributes are read-only. |
| |
| in1_label "vin" |
| in1_input Measured input voltage. |
| in1_average Average measured input voltage. |
| in1_min Minimum input voltage. |
| in1_max Maximum input voltage. |
| in1_min_alarm Input voltage low alarm. |
| in1_max_alarm Input voltage high alarm. |
| |
| in2_label "vout1" |
| in2_input Measured output voltage. |
| in2_average Average measured output voltage. |
| in2_min Minimum output voltage. |
| in2_min_alarm Output voltage low alarm. |
| |
| in3_label "vout2" |
| in3_input Measured voltage on vaux pin |
| |
| curr1_label "iin" |
| curr1_input Measured input current. |
| curr1_average Average measured input current. |
| curr1_max Maximum input current. |
| curr1_max_alarm Input current high alarm. |
| |
| power1_label "pin" |
| power1_input Measured input power. |
| power1_average Average measured input power. |
| power1_max Maximum input power limit. |
| power1_alarm Input power alarm |
| power1_input_highest Historical maximum power. |
| power1_reset_history Write any value to reset maximum power history. |
| |
| temp1_input Measured temperature. |
| temp1_max Maximum temperature. |
| temp1_crit Critical high temperature. |
| temp1_max_alarm Chip temperature high alarm. |
| temp1_crit_alarm Chip temperature critical high alarm. |
