| /* |
| * Cryptographic API. |
| * |
| * Support for OMAP AES HW acceleration. |
| * |
| * Copyright (c) 2010 Nokia Corporation |
| * Author: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| */ |
| |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/clk.h> |
| #include <linux/platform_device.h> |
| #include <linux/scatterlist.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/io.h> |
| #include <linux/crypto.h> |
| #include <linux/interrupt.h> |
| #include <crypto/scatterwalk.h> |
| #include <crypto/aes.h> |
| |
| #include <plat/cpu.h> |
| #include <plat/dma.h> |
| |
| /* OMAP TRM gives bitfields as start:end, where start is the higher bit |
| number. For example 7:0 */ |
| #define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end)) |
| #define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end)) |
| |
| #define AES_REG_KEY(x) (0x1C - ((x ^ 0x01) * 0x04)) |
| #define AES_REG_IV(x) (0x20 + ((x) * 0x04)) |
| |
| #define AES_REG_CTRL 0x30 |
| #define AES_REG_CTRL_CTR_WIDTH (1 << 7) |
| #define AES_REG_CTRL_CTR (1 << 6) |
| #define AES_REG_CTRL_CBC (1 << 5) |
| #define AES_REG_CTRL_KEY_SIZE (3 << 3) |
| #define AES_REG_CTRL_DIRECTION (1 << 2) |
| #define AES_REG_CTRL_INPUT_READY (1 << 1) |
| #define AES_REG_CTRL_OUTPUT_READY (1 << 0) |
| |
| #define AES_REG_DATA 0x34 |
| #define AES_REG_DATA_N(x) (0x34 + ((x) * 0x04)) |
| |
| #define AES_REG_REV 0x44 |
| #define AES_REG_REV_MAJOR 0xF0 |
| #define AES_REG_REV_MINOR 0x0F |
| |
| #define AES_REG_MASK 0x48 |
| #define AES_REG_MASK_SIDLE (1 << 6) |
| #define AES_REG_MASK_START (1 << 5) |
| #define AES_REG_MASK_DMA_OUT_EN (1 << 3) |
| #define AES_REG_MASK_DMA_IN_EN (1 << 2) |
| #define AES_REG_MASK_SOFTRESET (1 << 1) |
| #define AES_REG_AUTOIDLE (1 << 0) |
| |
| #define AES_REG_SYSSTATUS 0x4C |
| #define AES_REG_SYSSTATUS_RESETDONE (1 << 0) |
| |
| #define DEFAULT_TIMEOUT (5*HZ) |
| |
| #define FLAGS_MODE_MASK 0x000f |
| #define FLAGS_ENCRYPT BIT(0) |
| #define FLAGS_CBC BIT(1) |
| #define FLAGS_GIV BIT(2) |
| |
| #define FLAGS_INIT BIT(4) |
| #define FLAGS_FAST BIT(5) |
| #define FLAGS_BUSY BIT(6) |
| |
| struct omap_aes_ctx { |
| struct omap_aes_dev *dd; |
| |
| int keylen; |
| u32 key[AES_KEYSIZE_256 / sizeof(u32)]; |
| unsigned long flags; |
| }; |
| |
| struct omap_aes_reqctx { |
| unsigned long mode; |
| }; |
| |
| #define OMAP_AES_QUEUE_LENGTH 1 |
| #define OMAP_AES_CACHE_SIZE 0 |
| |
| struct omap_aes_dev { |
| struct list_head list; |
| unsigned long phys_base; |
| void __iomem *io_base; |
| struct clk *iclk; |
| struct omap_aes_ctx *ctx; |
| struct device *dev; |
| unsigned long flags; |
| int err; |
| |
| spinlock_t lock; |
| struct crypto_queue queue; |
| |
| struct tasklet_struct done_task; |
| struct tasklet_struct queue_task; |
| |
| struct ablkcipher_request *req; |
| size_t total; |
| struct scatterlist *in_sg; |
| size_t in_offset; |
| struct scatterlist *out_sg; |
| size_t out_offset; |
| |
| size_t buflen; |
| void *buf_in; |
| size_t dma_size; |
| int dma_in; |
| int dma_lch_in; |
| dma_addr_t dma_addr_in; |
| void *buf_out; |
| int dma_out; |
| int dma_lch_out; |
| dma_addr_t dma_addr_out; |
| }; |
| |
| /* keep registered devices data here */ |
| static LIST_HEAD(dev_list); |
| static DEFINE_SPINLOCK(list_lock); |
| |
| static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset) |
| { |
| return __raw_readl(dd->io_base + offset); |
| } |
| |
| static inline void omap_aes_write(struct omap_aes_dev *dd, u32 offset, |
| u32 value) |
| { |
| __raw_writel(value, dd->io_base + offset); |
| } |
| |
| static inline void omap_aes_write_mask(struct omap_aes_dev *dd, u32 offset, |
| u32 value, u32 mask) |
| { |
| u32 val; |
| |
| val = omap_aes_read(dd, offset); |
| val &= ~mask; |
| val |= value; |
| omap_aes_write(dd, offset, val); |
| } |
| |
| static void omap_aes_write_n(struct omap_aes_dev *dd, u32 offset, |
| u32 *value, int count) |
| { |
| for (; count--; value++, offset += 4) |
| omap_aes_write(dd, offset, *value); |
| } |
| |
| static int omap_aes_wait(struct omap_aes_dev *dd, u32 offset, u32 bit) |
| { |
| unsigned long timeout = jiffies + DEFAULT_TIMEOUT; |
| |
| while (!(omap_aes_read(dd, offset) & bit)) { |
| if (time_is_before_jiffies(timeout)) { |
| dev_err(dd->dev, "omap-aes timeout\n"); |
| return -ETIMEDOUT; |
| } |
| } |
| return 0; |
| } |
| |
| static int omap_aes_hw_init(struct omap_aes_dev *dd) |
| { |
| /* |
| * clocks are enabled when request starts and disabled when finished. |
| * It may be long delays between requests. |
| * Device might go to off mode to save power. |
| */ |
| clk_enable(dd->iclk); |
| |
| if (!(dd->flags & FLAGS_INIT)) { |
| /* is it necessary to reset before every operation? */ |
| omap_aes_write_mask(dd, AES_REG_MASK, AES_REG_MASK_SOFTRESET, |
| AES_REG_MASK_SOFTRESET); |
| /* |
| * prevent OCP bus error (SRESP) in case an access to the module |
| * is performed while the module is coming out of soft reset |
| */ |
| __asm__ __volatile__("nop"); |
| __asm__ __volatile__("nop"); |
| |
| if (omap_aes_wait(dd, AES_REG_SYSSTATUS, |
| AES_REG_SYSSTATUS_RESETDONE)) |
| return -ETIMEDOUT; |
| |
| dd->flags |= FLAGS_INIT; |
| dd->err = 0; |
| } |
| |
| return 0; |
| } |
| |
| static int omap_aes_write_ctrl(struct omap_aes_dev *dd) |
| { |
| unsigned int key32; |
| int i, err; |
| u32 val, mask; |
| |
| err = omap_aes_hw_init(dd); |
| if (err) |
| return err; |
| |
| val = 0; |
| if (dd->dma_lch_out >= 0) |
| val |= AES_REG_MASK_DMA_OUT_EN; |
| if (dd->dma_lch_in >= 0) |
| val |= AES_REG_MASK_DMA_IN_EN; |
| |
| mask = AES_REG_MASK_DMA_IN_EN | AES_REG_MASK_DMA_OUT_EN; |
| |
| omap_aes_write_mask(dd, AES_REG_MASK, val, mask); |
| |
| key32 = dd->ctx->keylen / sizeof(u32); |
| |
| /* it seems a key should always be set even if it has not changed */ |
| for (i = 0; i < key32; i++) { |
| omap_aes_write(dd, AES_REG_KEY(i), |
| __le32_to_cpu(dd->ctx->key[i])); |
| } |
| |
| if ((dd->flags & FLAGS_CBC) && dd->req->info) |
| omap_aes_write_n(dd, AES_REG_IV(0), dd->req->info, 4); |
| |
| val = FLD_VAL(((dd->ctx->keylen >> 3) - 1), 4, 3); |
| if (dd->flags & FLAGS_CBC) |
| val |= AES_REG_CTRL_CBC; |
| if (dd->flags & FLAGS_ENCRYPT) |
| val |= AES_REG_CTRL_DIRECTION; |
| |
| mask = AES_REG_CTRL_CBC | AES_REG_CTRL_DIRECTION | |
| AES_REG_CTRL_KEY_SIZE; |
| |
| omap_aes_write_mask(dd, AES_REG_CTRL, val, mask); |
| |
| /* IN */ |
| omap_set_dma_dest_params(dd->dma_lch_in, 0, OMAP_DMA_AMODE_CONSTANT, |
| dd->phys_base + AES_REG_DATA, 0, 4); |
| |
| omap_set_dma_dest_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4); |
| omap_set_dma_src_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4); |
| |
| /* OUT */ |
| omap_set_dma_src_params(dd->dma_lch_out, 0, OMAP_DMA_AMODE_CONSTANT, |
| dd->phys_base + AES_REG_DATA, 0, 4); |
| |
| omap_set_dma_src_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4); |
| omap_set_dma_dest_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4); |
| |
| return 0; |
| } |
| |
| static struct omap_aes_dev *omap_aes_find_dev(struct omap_aes_ctx *ctx) |
| { |
| struct omap_aes_dev *dd = NULL, *tmp; |
| |
| spin_lock_bh(&list_lock); |
| if (!ctx->dd) { |
| list_for_each_entry(tmp, &dev_list, list) { |
| /* FIXME: take fist available aes core */ |
| dd = tmp; |
| break; |
| } |
| ctx->dd = dd; |
| } else { |
| /* already found before */ |
| dd = ctx->dd; |
| } |
| spin_unlock_bh(&list_lock); |
| |
| return dd; |
| } |
| |
| static void omap_aes_dma_callback(int lch, u16 ch_status, void *data) |
| { |
| struct omap_aes_dev *dd = data; |
| |
| if (ch_status != OMAP_DMA_BLOCK_IRQ) { |
| pr_err("omap-aes DMA error status: 0x%hx\n", ch_status); |
| dd->err = -EIO; |
| dd->flags &= ~FLAGS_INIT; /* request to re-initialize */ |
| } else if (lch == dd->dma_lch_in) { |
| return; |
| } |
| |
| /* dma_lch_out - completed */ |
| tasklet_schedule(&dd->done_task); |
| } |
| |
| static int omap_aes_dma_init(struct omap_aes_dev *dd) |
| { |
| int err = -ENOMEM; |
| |
| dd->dma_lch_out = -1; |
| dd->dma_lch_in = -1; |
| |
| dd->buf_in = (void *)__get_free_pages(GFP_KERNEL, OMAP_AES_CACHE_SIZE); |
| dd->buf_out = (void *)__get_free_pages(GFP_KERNEL, OMAP_AES_CACHE_SIZE); |
| dd->buflen = PAGE_SIZE << OMAP_AES_CACHE_SIZE; |
| dd->buflen &= ~(AES_BLOCK_SIZE - 1); |
| |
| if (!dd->buf_in || !dd->buf_out) { |
| dev_err(dd->dev, "unable to alloc pages.\n"); |
| goto err_alloc; |
| } |
| |
| /* MAP here */ |
| dd->dma_addr_in = dma_map_single(dd->dev, dd->buf_in, dd->buflen, |
| DMA_TO_DEVICE); |
| if (dma_mapping_error(dd->dev, dd->dma_addr_in)) { |
| dev_err(dd->dev, "dma %d bytes error\n", dd->buflen); |
| err = -EINVAL; |
| goto err_map_in; |
| } |
| |
| dd->dma_addr_out = dma_map_single(dd->dev, dd->buf_out, dd->buflen, |
| DMA_FROM_DEVICE); |
| if (dma_mapping_error(dd->dev, dd->dma_addr_out)) { |
| dev_err(dd->dev, "dma %d bytes error\n", dd->buflen); |
| err = -EINVAL; |
| goto err_map_out; |
| } |
| |
| err = omap_request_dma(dd->dma_in, "omap-aes-rx", |
| omap_aes_dma_callback, dd, &dd->dma_lch_in); |
| if (err) { |
| dev_err(dd->dev, "Unable to request DMA channel\n"); |
| goto err_dma_in; |
| } |
| err = omap_request_dma(dd->dma_out, "omap-aes-tx", |
| omap_aes_dma_callback, dd, &dd->dma_lch_out); |
| if (err) { |
| dev_err(dd->dev, "Unable to request DMA channel\n"); |
| goto err_dma_out; |
| } |
| |
| return 0; |
| |
| err_dma_out: |
| omap_free_dma(dd->dma_lch_in); |
| err_dma_in: |
| dma_unmap_single(dd->dev, dd->dma_addr_out, dd->buflen, |
| DMA_FROM_DEVICE); |
| err_map_out: |
| dma_unmap_single(dd->dev, dd->dma_addr_in, dd->buflen, DMA_TO_DEVICE); |
| err_map_in: |
| free_pages((unsigned long)dd->buf_out, OMAP_AES_CACHE_SIZE); |
| free_pages((unsigned long)dd->buf_in, OMAP_AES_CACHE_SIZE); |
| err_alloc: |
| if (err) |
| pr_err("error: %d\n", err); |
| return err; |
| } |
| |
| static void omap_aes_dma_cleanup(struct omap_aes_dev *dd) |
| { |
| omap_free_dma(dd->dma_lch_out); |
| omap_free_dma(dd->dma_lch_in); |
| dma_unmap_single(dd->dev, dd->dma_addr_out, dd->buflen, |
| DMA_FROM_DEVICE); |
| dma_unmap_single(dd->dev, dd->dma_addr_in, dd->buflen, DMA_TO_DEVICE); |
| free_pages((unsigned long)dd->buf_out, OMAP_AES_CACHE_SIZE); |
| free_pages((unsigned long)dd->buf_in, OMAP_AES_CACHE_SIZE); |
| } |
| |
| static void sg_copy_buf(void *buf, struct scatterlist *sg, |
| unsigned int start, unsigned int nbytes, int out) |
| { |
| struct scatter_walk walk; |
| |
| if (!nbytes) |
| return; |
| |
| scatterwalk_start(&walk, sg); |
| scatterwalk_advance(&walk, start); |
| scatterwalk_copychunks(buf, &walk, nbytes, out); |
| scatterwalk_done(&walk, out, 0); |
| } |
| |
| static int sg_copy(struct scatterlist **sg, size_t *offset, void *buf, |
| size_t buflen, size_t total, int out) |
| { |
| unsigned int count, off = 0; |
| |
| while (buflen && total) { |
| count = min((*sg)->length - *offset, total); |
| count = min(count, buflen); |
| |
| if (!count) |
| return off; |
| |
| /* |
| * buflen and total are AES_BLOCK_SIZE size aligned, |
| * so count should be also aligned |
| */ |
| |
| sg_copy_buf(buf + off, *sg, *offset, count, out); |
| |
| off += count; |
| buflen -= count; |
| *offset += count; |
| total -= count; |
| |
| if (*offset == (*sg)->length) { |
| *sg = sg_next(*sg); |
| if (*sg) |
| *offset = 0; |
| else |
| total = 0; |
| } |
| } |
| |
| return off; |
| } |
| |
| static int omap_aes_crypt_dma(struct crypto_tfm *tfm, dma_addr_t dma_addr_in, |
| dma_addr_t dma_addr_out, int length) |
| { |
| struct omap_aes_ctx *ctx = crypto_tfm_ctx(tfm); |
| struct omap_aes_dev *dd = ctx->dd; |
| int len32; |
| |
| pr_debug("len: %d\n", length); |
| |
| dd->dma_size = length; |
| |
| if (!(dd->flags & FLAGS_FAST)) |
| dma_sync_single_for_device(dd->dev, dma_addr_in, length, |
| DMA_TO_DEVICE); |
| |
| len32 = DIV_ROUND_UP(length, sizeof(u32)); |
| |
| /* IN */ |
| omap_set_dma_transfer_params(dd->dma_lch_in, OMAP_DMA_DATA_TYPE_S32, |
| len32, 1, OMAP_DMA_SYNC_PACKET, dd->dma_in, |
| OMAP_DMA_DST_SYNC); |
| |
| omap_set_dma_src_params(dd->dma_lch_in, 0, OMAP_DMA_AMODE_POST_INC, |
| dma_addr_in, 0, 0); |
| |
| /* OUT */ |
| omap_set_dma_transfer_params(dd->dma_lch_out, OMAP_DMA_DATA_TYPE_S32, |
| len32, 1, OMAP_DMA_SYNC_PACKET, |
| dd->dma_out, OMAP_DMA_SRC_SYNC); |
| |
| omap_set_dma_dest_params(dd->dma_lch_out, 0, OMAP_DMA_AMODE_POST_INC, |
| dma_addr_out, 0, 0); |
| |
| omap_start_dma(dd->dma_lch_in); |
| omap_start_dma(dd->dma_lch_out); |
| |
| /* start DMA or disable idle mode */ |
| omap_aes_write_mask(dd, AES_REG_MASK, AES_REG_MASK_START, |
| AES_REG_MASK_START); |
| |
| return 0; |
| } |
| |
| static int omap_aes_crypt_dma_start(struct omap_aes_dev *dd) |
| { |
| struct crypto_tfm *tfm = crypto_ablkcipher_tfm( |
| crypto_ablkcipher_reqtfm(dd->req)); |
| int err, fast = 0, in, out; |
| size_t count; |
| dma_addr_t addr_in, addr_out; |
| |
| pr_debug("total: %d\n", dd->total); |
| |
| if (sg_is_last(dd->in_sg) && sg_is_last(dd->out_sg)) { |
| /* check for alignment */ |
| in = IS_ALIGNED((u32)dd->in_sg->offset, sizeof(u32)); |
| out = IS_ALIGNED((u32)dd->out_sg->offset, sizeof(u32)); |
| |
| fast = in && out; |
| } |
| |
| if (fast) { |
| count = min(dd->total, sg_dma_len(dd->in_sg)); |
| count = min(count, sg_dma_len(dd->out_sg)); |
| |
| if (count != dd->total) { |
| pr_err("request length != buffer length\n"); |
| return -EINVAL; |
| } |
| |
| pr_debug("fast\n"); |
| |
| err = dma_map_sg(dd->dev, dd->in_sg, 1, DMA_TO_DEVICE); |
| if (!err) { |
| dev_err(dd->dev, "dma_map_sg() error\n"); |
| return -EINVAL; |
| } |
| |
| err = dma_map_sg(dd->dev, dd->out_sg, 1, DMA_FROM_DEVICE); |
| if (!err) { |
| dev_err(dd->dev, "dma_map_sg() error\n"); |
| dma_unmap_sg(dd->dev, dd->in_sg, 1, DMA_TO_DEVICE); |
| return -EINVAL; |
| } |
| |
| addr_in = sg_dma_address(dd->in_sg); |
| addr_out = sg_dma_address(dd->out_sg); |
| |
| dd->flags |= FLAGS_FAST; |
| |
| } else { |
| /* use cache buffers */ |
| count = sg_copy(&dd->in_sg, &dd->in_offset, dd->buf_in, |
| dd->buflen, dd->total, 0); |
| |
| addr_in = dd->dma_addr_in; |
| addr_out = dd->dma_addr_out; |
| |
| dd->flags &= ~FLAGS_FAST; |
| |
| } |
| |
| dd->total -= count; |
| |
| err = omap_aes_crypt_dma(tfm, addr_in, addr_out, count); |
| if (err) { |
| dma_unmap_sg(dd->dev, dd->in_sg, 1, DMA_TO_DEVICE); |
| dma_unmap_sg(dd->dev, dd->out_sg, 1, DMA_TO_DEVICE); |
| } |
| |
| return err; |
| } |
| |
| static void omap_aes_finish_req(struct omap_aes_dev *dd, int err) |
| { |
| struct ablkcipher_request *req = dd->req; |
| |
| pr_debug("err: %d\n", err); |
| |
| clk_disable(dd->iclk); |
| dd->flags &= ~FLAGS_BUSY; |
| |
| req->base.complete(&req->base, err); |
| } |
| |
| static int omap_aes_crypt_dma_stop(struct omap_aes_dev *dd) |
| { |
| int err = 0; |
| size_t count; |
| |
| pr_debug("total: %d\n", dd->total); |
| |
| omap_aes_write_mask(dd, AES_REG_MASK, 0, AES_REG_MASK_START); |
| |
| omap_stop_dma(dd->dma_lch_in); |
| omap_stop_dma(dd->dma_lch_out); |
| |
| if (dd->flags & FLAGS_FAST) { |
| dma_unmap_sg(dd->dev, dd->out_sg, 1, DMA_FROM_DEVICE); |
| dma_unmap_sg(dd->dev, dd->in_sg, 1, DMA_TO_DEVICE); |
| } else { |
| dma_sync_single_for_device(dd->dev, dd->dma_addr_out, |
| dd->dma_size, DMA_FROM_DEVICE); |
| |
| /* copy data */ |
| count = sg_copy(&dd->out_sg, &dd->out_offset, dd->buf_out, |
| dd->buflen, dd->dma_size, 1); |
| if (count != dd->dma_size) { |
| err = -EINVAL; |
| pr_err("not all data converted: %u\n", count); |
| } |
| } |
| |
| return err; |
| } |
| |
| static int omap_aes_handle_queue(struct omap_aes_dev *dd, |
| struct ablkcipher_request *req) |
| { |
| struct crypto_async_request *async_req, *backlog; |
| struct omap_aes_ctx *ctx; |
| struct omap_aes_reqctx *rctx; |
| unsigned long flags; |
| int err, ret = 0; |
| |
| spin_lock_irqsave(&dd->lock, flags); |
| if (req) |
| ret = ablkcipher_enqueue_request(&dd->queue, req); |
| if (dd->flags & FLAGS_BUSY) { |
| spin_unlock_irqrestore(&dd->lock, flags); |
| return ret; |
| } |
| backlog = crypto_get_backlog(&dd->queue); |
| async_req = crypto_dequeue_request(&dd->queue); |
| if (async_req) |
| dd->flags |= FLAGS_BUSY; |
| spin_unlock_irqrestore(&dd->lock, flags); |
| |
| if (!async_req) |
| return ret; |
| |
| if (backlog) |
| backlog->complete(backlog, -EINPROGRESS); |
| |
| req = ablkcipher_request_cast(async_req); |
| |
| /* assign new request to device */ |
| dd->req = req; |
| dd->total = req->nbytes; |
| dd->in_offset = 0; |
| dd->in_sg = req->src; |
| dd->out_offset = 0; |
| dd->out_sg = req->dst; |
| |
| rctx = ablkcipher_request_ctx(req); |
| ctx = crypto_ablkcipher_ctx(crypto_ablkcipher_reqtfm(req)); |
| rctx->mode &= FLAGS_MODE_MASK; |
| dd->flags = (dd->flags & ~FLAGS_MODE_MASK) | rctx->mode; |
| |
| dd->ctx = ctx; |
| ctx->dd = dd; |
| |
| err = omap_aes_write_ctrl(dd); |
| if (!err) |
| err = omap_aes_crypt_dma_start(dd); |
| if (err) { |
| /* aes_task will not finish it, so do it here */ |
| omap_aes_finish_req(dd, err); |
| tasklet_schedule(&dd->queue_task); |
| } |
| |
| return ret; /* return ret, which is enqueue return value */ |
| } |
| |
| static void omap_aes_done_task(unsigned long data) |
| { |
| struct omap_aes_dev *dd = (struct omap_aes_dev *)data; |
| int err; |
| |
| pr_debug("enter\n"); |
| |
| err = omap_aes_crypt_dma_stop(dd); |
| |
| err = dd->err ? : err; |
| |
| if (dd->total && !err) { |
| err = omap_aes_crypt_dma_start(dd); |
| if (!err) |
| return; /* DMA started. Not fininishing. */ |
| } |
| |
| omap_aes_finish_req(dd, err); |
| omap_aes_handle_queue(dd, NULL); |
| |
| pr_debug("exit\n"); |
| } |
| |
| static void omap_aes_queue_task(unsigned long data) |
| { |
| struct omap_aes_dev *dd = (struct omap_aes_dev *)data; |
| |
| omap_aes_handle_queue(dd, NULL); |
| } |
| |
| static int omap_aes_crypt(struct ablkcipher_request *req, unsigned long mode) |
| { |
| struct omap_aes_ctx *ctx = crypto_ablkcipher_ctx( |
| crypto_ablkcipher_reqtfm(req)); |
| struct omap_aes_reqctx *rctx = ablkcipher_request_ctx(req); |
| struct omap_aes_dev *dd; |
| |
| pr_debug("nbytes: %d, enc: %d, cbc: %d\n", req->nbytes, |
| !!(mode & FLAGS_ENCRYPT), |
| !!(mode & FLAGS_CBC)); |
| |
| if (!IS_ALIGNED(req->nbytes, AES_BLOCK_SIZE)) { |
| pr_err("request size is not exact amount of AES blocks\n"); |
| return -EINVAL; |
| } |
| |
| dd = omap_aes_find_dev(ctx); |
| if (!dd) |
| return -ENODEV; |
| |
| rctx->mode = mode; |
| |
| return omap_aes_handle_queue(dd, req); |
| } |
| |
| /* ********************** ALG API ************************************ */ |
| |
| static int omap_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key, |
| unsigned int keylen) |
| { |
| struct omap_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm); |
| |
| if (keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_192 && |
| keylen != AES_KEYSIZE_256) |
| return -EINVAL; |
| |
| pr_debug("enter, keylen: %d\n", keylen); |
| |
| memcpy(ctx->key, key, keylen); |
| ctx->keylen = keylen; |
| |
| return 0; |
| } |
| |
| static int omap_aes_ecb_encrypt(struct ablkcipher_request *req) |
| { |
| return omap_aes_crypt(req, FLAGS_ENCRYPT); |
| } |
| |
| static int omap_aes_ecb_decrypt(struct ablkcipher_request *req) |
| { |
| return omap_aes_crypt(req, 0); |
| } |
| |
| static int omap_aes_cbc_encrypt(struct ablkcipher_request *req) |
| { |
| return omap_aes_crypt(req, FLAGS_ENCRYPT | FLAGS_CBC); |
| } |
| |
| static int omap_aes_cbc_decrypt(struct ablkcipher_request *req) |
| { |
| return omap_aes_crypt(req, FLAGS_CBC); |
| } |
| |
| static int omap_aes_cra_init(struct crypto_tfm *tfm) |
| { |
| pr_debug("enter\n"); |
| |
| tfm->crt_ablkcipher.reqsize = sizeof(struct omap_aes_reqctx); |
| |
| return 0; |
| } |
| |
| static void omap_aes_cra_exit(struct crypto_tfm *tfm) |
| { |
| pr_debug("enter\n"); |
| } |
| |
| /* ********************** ALGS ************************************ */ |
| |
| static struct crypto_alg algs[] = { |
| { |
| .cra_name = "ecb(aes)", |
| .cra_driver_name = "ecb-aes-omap", |
| .cra_priority = 100, |
| .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, |
| .cra_blocksize = AES_BLOCK_SIZE, |
| .cra_ctxsize = sizeof(struct omap_aes_ctx), |
| .cra_alignmask = 0, |
| .cra_type = &crypto_ablkcipher_type, |
| .cra_module = THIS_MODULE, |
| .cra_init = omap_aes_cra_init, |
| .cra_exit = omap_aes_cra_exit, |
| .cra_u.ablkcipher = { |
| .min_keysize = AES_MIN_KEY_SIZE, |
| .max_keysize = AES_MAX_KEY_SIZE, |
| .setkey = omap_aes_setkey, |
| .encrypt = omap_aes_ecb_encrypt, |
| .decrypt = omap_aes_ecb_decrypt, |
| } |
| }, |
| { |
| .cra_name = "cbc(aes)", |
| .cra_driver_name = "cbc-aes-omap", |
| .cra_priority = 100, |
| .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, |
| .cra_blocksize = AES_BLOCK_SIZE, |
| .cra_ctxsize = sizeof(struct omap_aes_ctx), |
| .cra_alignmask = 0, |
| .cra_type = &crypto_ablkcipher_type, |
| .cra_module = THIS_MODULE, |
| .cra_init = omap_aes_cra_init, |
| .cra_exit = omap_aes_cra_exit, |
| .cra_u.ablkcipher = { |
| .min_keysize = AES_MIN_KEY_SIZE, |
| .max_keysize = AES_MAX_KEY_SIZE, |
| .ivsize = AES_BLOCK_SIZE, |
| .setkey = omap_aes_setkey, |
| .encrypt = omap_aes_cbc_encrypt, |
| .decrypt = omap_aes_cbc_decrypt, |
| } |
| } |
| }; |
| |
| static int omap_aes_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct omap_aes_dev *dd; |
| struct resource *res; |
| int err = -ENOMEM, i, j; |
| u32 reg; |
| |
| dd = kzalloc(sizeof(struct omap_aes_dev), GFP_KERNEL); |
| if (dd == NULL) { |
| dev_err(dev, "unable to alloc data struct.\n"); |
| goto err_data; |
| } |
| dd->dev = dev; |
| platform_set_drvdata(pdev, dd); |
| |
| spin_lock_init(&dd->lock); |
| crypto_init_queue(&dd->queue, OMAP_AES_QUEUE_LENGTH); |
| |
| /* Get the base address */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(dev, "invalid resource type\n"); |
| err = -ENODEV; |
| goto err_res; |
| } |
| dd->phys_base = res->start; |
| |
| /* Get the DMA */ |
| res = platform_get_resource(pdev, IORESOURCE_DMA, 0); |
| if (!res) |
| dev_info(dev, "no DMA info\n"); |
| else |
| dd->dma_out = res->start; |
| |
| /* Get the DMA */ |
| res = platform_get_resource(pdev, IORESOURCE_DMA, 1); |
| if (!res) |
| dev_info(dev, "no DMA info\n"); |
| else |
| dd->dma_in = res->start; |
| |
| /* Initializing the clock */ |
| dd->iclk = clk_get(dev, "ick"); |
| if (IS_ERR(dd->iclk)) { |
| dev_err(dev, "clock intialization failed.\n"); |
| err = PTR_ERR(dd->iclk); |
| goto err_res; |
| } |
| |
| dd->io_base = ioremap(dd->phys_base, SZ_4K); |
| if (!dd->io_base) { |
| dev_err(dev, "can't ioremap\n"); |
| err = -ENOMEM; |
| goto err_io; |
| } |
| |
| clk_enable(dd->iclk); |
| reg = omap_aes_read(dd, AES_REG_REV); |
| dev_info(dev, "OMAP AES hw accel rev: %u.%u\n", |
| (reg & AES_REG_REV_MAJOR) >> 4, reg & AES_REG_REV_MINOR); |
| clk_disable(dd->iclk); |
| |
| tasklet_init(&dd->done_task, omap_aes_done_task, (unsigned long)dd); |
| tasklet_init(&dd->queue_task, omap_aes_queue_task, (unsigned long)dd); |
| |
| err = omap_aes_dma_init(dd); |
| if (err) |
| goto err_dma; |
| |
| INIT_LIST_HEAD(&dd->list); |
| spin_lock(&list_lock); |
| list_add_tail(&dd->list, &dev_list); |
| spin_unlock(&list_lock); |
| |
| for (i = 0; i < ARRAY_SIZE(algs); i++) { |
| pr_debug("i: %d\n", i); |
| INIT_LIST_HEAD(&algs[i].cra_list); |
| err = crypto_register_alg(&algs[i]); |
| if (err) |
| goto err_algs; |
| } |
| |
| pr_info("probe() done\n"); |
| |
| return 0; |
| err_algs: |
| for (j = 0; j < i; j++) |
| crypto_unregister_alg(&algs[j]); |
| omap_aes_dma_cleanup(dd); |
| err_dma: |
| tasklet_kill(&dd->done_task); |
| tasklet_kill(&dd->queue_task); |
| iounmap(dd->io_base); |
| err_io: |
| clk_put(dd->iclk); |
| err_res: |
| kfree(dd); |
| dd = NULL; |
| err_data: |
| dev_err(dev, "initialization failed.\n"); |
| return err; |
| } |
| |
| static int omap_aes_remove(struct platform_device *pdev) |
| { |
| struct omap_aes_dev *dd = platform_get_drvdata(pdev); |
| int i; |
| |
| if (!dd) |
| return -ENODEV; |
| |
| spin_lock(&list_lock); |
| list_del(&dd->list); |
| spin_unlock(&list_lock); |
| |
| for (i = 0; i < ARRAY_SIZE(algs); i++) |
| crypto_unregister_alg(&algs[i]); |
| |
| tasklet_kill(&dd->done_task); |
| tasklet_kill(&dd->queue_task); |
| omap_aes_dma_cleanup(dd); |
| iounmap(dd->io_base); |
| clk_put(dd->iclk); |
| kfree(dd); |
| dd = NULL; |
| |
| return 0; |
| } |
| |
| static struct platform_driver omap_aes_driver = { |
| .probe = omap_aes_probe, |
| .remove = omap_aes_remove, |
| .driver = { |
| .name = "omap-aes", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init omap_aes_mod_init(void) |
| { |
| pr_info("loading %s driver\n", "omap-aes"); |
| |
| if (!cpu_class_is_omap2() || omap_type() != OMAP2_DEVICE_TYPE_SEC) { |
| pr_err("Unsupported cpu\n"); |
| return -ENODEV; |
| } |
| |
| return platform_driver_register(&omap_aes_driver); |
| } |
| |
| static void __exit omap_aes_mod_exit(void) |
| { |
| platform_driver_unregister(&omap_aes_driver); |
| } |
| |
| module_init(omap_aes_mod_init); |
| module_exit(omap_aes_mod_exit); |
| |
| MODULE_DESCRIPTION("OMAP AES hw acceleration support."); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Dmitry Kasatkin"); |
| |