| #ifndef _ASM_X86_PGTABLE_2LEVEL_H |
| #define _ASM_X86_PGTABLE_2LEVEL_H |
| |
| #define pte_ERROR(e) \ |
| printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte_low) |
| #define pgd_ERROR(e) \ |
| printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) |
| |
| /* |
| * Certain architectures need to do special things when PTEs |
| * within a page table are directly modified. Thus, the following |
| * hook is made available. |
| */ |
| static inline void native_set_pte(pte_t *ptep , pte_t pte) |
| { |
| *ptep = pte; |
| } |
| |
| static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd) |
| { |
| *pmdp = pmd; |
| } |
| |
| static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte) |
| { |
| native_set_pte(ptep, pte); |
| } |
| |
| static inline void native_pmd_clear(pmd_t *pmdp) |
| { |
| native_set_pmd(pmdp, __pmd(0)); |
| } |
| |
| static inline void native_pte_clear(struct mm_struct *mm, |
| unsigned long addr, pte_t *xp) |
| { |
| *xp = native_make_pte(0); |
| } |
| |
| #ifdef CONFIG_SMP |
| static inline pte_t native_ptep_get_and_clear(pte_t *xp) |
| { |
| return __pte(xchg(&xp->pte_low, 0)); |
| } |
| #else |
| #define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp) |
| #endif |
| |
| #ifdef CONFIG_SMP |
| static inline pmd_t native_pmdp_get_and_clear(pmd_t *xp) |
| { |
| return __pmd(xchg((pmdval_t *)xp, 0)); |
| } |
| #else |
| #define native_pmdp_get_and_clear(xp) native_local_pmdp_get_and_clear(xp) |
| #endif |
| |
| /* |
| * Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE and _PAGE_BIT_PROTNONE are taken, |
| * split up the 29 bits of offset into this range: |
| */ |
| #define PTE_FILE_MAX_BITS 29 |
| #define PTE_FILE_SHIFT1 (_PAGE_BIT_PRESENT + 1) |
| #if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE |
| #define PTE_FILE_SHIFT2 (_PAGE_BIT_FILE + 1) |
| #define PTE_FILE_SHIFT3 (_PAGE_BIT_PROTNONE + 1) |
| #else |
| #define PTE_FILE_SHIFT2 (_PAGE_BIT_PROTNONE + 1) |
| #define PTE_FILE_SHIFT3 (_PAGE_BIT_FILE + 1) |
| #endif |
| #define PTE_FILE_BITS1 (PTE_FILE_SHIFT2 - PTE_FILE_SHIFT1 - 1) |
| #define PTE_FILE_BITS2 (PTE_FILE_SHIFT3 - PTE_FILE_SHIFT2 - 1) |
| |
| #define pte_to_pgoff(pte) \ |
| ((((pte).pte_low >> PTE_FILE_SHIFT1) \ |
| & ((1U << PTE_FILE_BITS1) - 1)) \ |
| + ((((pte).pte_low >> PTE_FILE_SHIFT2) \ |
| & ((1U << PTE_FILE_BITS2) - 1)) << PTE_FILE_BITS1) \ |
| + (((pte).pte_low >> PTE_FILE_SHIFT3) \ |
| << (PTE_FILE_BITS1 + PTE_FILE_BITS2))) |
| |
| #define pgoff_to_pte(off) \ |
| ((pte_t) { .pte_low = \ |
| (((off) & ((1U << PTE_FILE_BITS1) - 1)) << PTE_FILE_SHIFT1) \ |
| + ((((off) >> PTE_FILE_BITS1) & ((1U << PTE_FILE_BITS2) - 1)) \ |
| << PTE_FILE_SHIFT2) \ |
| + (((off) >> (PTE_FILE_BITS1 + PTE_FILE_BITS2)) \ |
| << PTE_FILE_SHIFT3) \ |
| + _PAGE_FILE }) |
| |
| /* Encode and de-code a swap entry */ |
| #if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE |
| #define SWP_TYPE_BITS (_PAGE_BIT_FILE - _PAGE_BIT_PRESENT - 1) |
| #define SWP_OFFSET_SHIFT (_PAGE_BIT_PROTNONE + 1) |
| #else |
| #define SWP_TYPE_BITS (_PAGE_BIT_PROTNONE - _PAGE_BIT_PRESENT - 1) |
| #define SWP_OFFSET_SHIFT (_PAGE_BIT_FILE + 1) |
| #endif |
| |
| #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS) |
| |
| #define __swp_type(x) (((x).val >> (_PAGE_BIT_PRESENT + 1)) \ |
| & ((1U << SWP_TYPE_BITS) - 1)) |
| #define __swp_offset(x) ((x).val >> SWP_OFFSET_SHIFT) |
| #define __swp_entry(type, offset) ((swp_entry_t) { \ |
| ((type) << (_PAGE_BIT_PRESENT + 1)) \ |
| | ((offset) << SWP_OFFSET_SHIFT) }) |
| #define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_low }) |
| #define __swp_entry_to_pte(x) ((pte_t) { .pte = (x).val }) |
| |
| #endif /* _ASM_X86_PGTABLE_2LEVEL_H */ |