| /* linux/arch/arm/plat-s3c64xx/dev-spi.c |
| * |
| * Copyright (C) 2009 Samsung Electronics Ltd. |
| * Jaswinder Singh <jassi.brar@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/export.h> |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/gpio.h> |
| |
| #include <mach/dma.h> |
| #include <mach/map.h> |
| #include <mach/spi-clocks.h> |
| #include <mach/irqs.h> |
| |
| #include <plat/s3c64xx-spi.h> |
| #include <plat/gpio-cfg.h> |
| #include <plat/devs.h> |
| |
| static char *spi_src_clks[] = { |
| [S3C64XX_SPI_SRCCLK_PCLK] = "pclk", |
| [S3C64XX_SPI_SRCCLK_SPIBUS] = "spi-bus", |
| [S3C64XX_SPI_SRCCLK_48M] = "spi_48m", |
| }; |
| |
| /* SPI Controller platform_devices */ |
| |
| /* Since we emulate multi-cs capability, we do not touch the GPC-3,7. |
| * The emulated CS is toggled by board specific mechanism, as it can |
| * be either some immediate GPIO or some signal out of some other |
| * chip in between ... or some yet another way. |
| * We simply do not assume anything about CS. |
| */ |
| static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev) |
| { |
| unsigned int base; |
| |
| switch (pdev->id) { |
| case 0: |
| base = S3C64XX_GPC(0); |
| break; |
| |
| case 1: |
| base = S3C64XX_GPC(4); |
| break; |
| |
| default: |
| dev_err(&pdev->dev, "Invalid SPI Controller number!"); |
| return -EINVAL; |
| } |
| |
| s3c_gpio_cfgall_range(base, 3, |
| S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); |
| |
| return 0; |
| } |
| |
| static struct resource s3c64xx_spi0_resource[] = { |
| [0] = { |
| .start = S3C64XX_PA_SPI0, |
| .end = S3C64XX_PA_SPI0 + 0x100 - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = DMACH_SPI0_TX, |
| .end = DMACH_SPI0_TX, |
| .flags = IORESOURCE_DMA, |
| }, |
| [2] = { |
| .start = DMACH_SPI0_RX, |
| .end = DMACH_SPI0_RX, |
| .flags = IORESOURCE_DMA, |
| }, |
| [3] = { |
| .start = IRQ_SPI0, |
| .end = IRQ_SPI0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct s3c64xx_spi_info s3c64xx_spi0_pdata = { |
| .cfg_gpio = s3c64xx_spi_cfg_gpio, |
| .fifo_lvl_mask = 0x7f, |
| .rx_lvl_offset = 13, |
| .tx_st_done = 21, |
| }; |
| |
| static u64 spi_dmamask = DMA_BIT_MASK(32); |
| |
| struct platform_device s3c64xx_device_spi0 = { |
| .name = "s3c64xx-spi", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource), |
| .resource = s3c64xx_spi0_resource, |
| .dev = { |
| .dma_mask = &spi_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &s3c64xx_spi0_pdata, |
| }, |
| }; |
| EXPORT_SYMBOL(s3c64xx_device_spi0); |
| |
| static struct resource s3c64xx_spi1_resource[] = { |
| [0] = { |
| .start = S3C64XX_PA_SPI1, |
| .end = S3C64XX_PA_SPI1 + 0x100 - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = DMACH_SPI1_TX, |
| .end = DMACH_SPI1_TX, |
| .flags = IORESOURCE_DMA, |
| }, |
| [2] = { |
| .start = DMACH_SPI1_RX, |
| .end = DMACH_SPI1_RX, |
| .flags = IORESOURCE_DMA, |
| }, |
| [3] = { |
| .start = IRQ_SPI1, |
| .end = IRQ_SPI1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct s3c64xx_spi_info s3c64xx_spi1_pdata = { |
| .cfg_gpio = s3c64xx_spi_cfg_gpio, |
| .fifo_lvl_mask = 0x7f, |
| .rx_lvl_offset = 13, |
| .tx_st_done = 21, |
| }; |
| |
| struct platform_device s3c64xx_device_spi1 = { |
| .name = "s3c64xx-spi", |
| .id = 1, |
| .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource), |
| .resource = s3c64xx_spi1_resource, |
| .dev = { |
| .dma_mask = &spi_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &s3c64xx_spi1_pdata, |
| }, |
| }; |
| EXPORT_SYMBOL(s3c64xx_device_spi1); |
| |
| void __init s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) |
| { |
| struct s3c64xx_spi_info *pd; |
| |
| /* Reject invalid configuration */ |
| if (!num_cs || src_clk_nr < 0 |
| || src_clk_nr > S3C64XX_SPI_SRCCLK_48M) { |
| printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); |
| return; |
| } |
| |
| switch (cntrlr) { |
| case 0: |
| pd = &s3c64xx_spi0_pdata; |
| break; |
| case 1: |
| pd = &s3c64xx_spi1_pdata; |
| break; |
| default: |
| printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", |
| __func__, cntrlr); |
| return; |
| } |
| |
| pd->num_cs = num_cs; |
| pd->src_clk_nr = src_clk_nr; |
| pd->src_clk_name = spi_src_clks[src_clk_nr]; |
| } |