| #ifndef ASMARM_DMA_MAPPING_H |
| #define ASMARM_DMA_MAPPING_H |
| |
| #ifdef __KERNEL__ |
| |
| #include <linux/mm_types.h> |
| #include <linux/scatterlist.h> |
| #include <linux/dma-debug.h> |
| |
| #include <asm-generic/dma-coherent.h> |
| #include <asm/memory.h> |
| |
| #ifdef __arch_page_to_dma |
| #error Please update to __arch_pfn_to_dma |
| #endif |
| |
| /* |
| * dma_to_pfn/pfn_to_dma/dma_to_virt/virt_to_dma are architecture private |
| * functions used internally by the DMA-mapping API to provide DMA |
| * addresses. They must not be used by drivers. |
| */ |
| #ifndef __arch_pfn_to_dma |
| static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn) |
| { |
| return (dma_addr_t)__pfn_to_bus(pfn); |
| } |
| |
| static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr) |
| { |
| return __bus_to_pfn(addr); |
| } |
| |
| static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) |
| { |
| return (void *)__bus_to_virt((unsigned long)addr); |
| } |
| |
| static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) |
| { |
| return (dma_addr_t)__virt_to_bus((unsigned long)(addr)); |
| } |
| #else |
| static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn) |
| { |
| return __arch_pfn_to_dma(dev, pfn); |
| } |
| |
| static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr) |
| { |
| return __arch_dma_to_pfn(dev, addr); |
| } |
| |
| static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) |
| { |
| return __arch_dma_to_virt(dev, addr); |
| } |
| |
| static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) |
| { |
| return __arch_virt_to_dma(dev, addr); |
| } |
| #endif |
| |
| /* |
| * The DMA API is built upon the notion of "buffer ownership". A buffer |
| * is either exclusively owned by the CPU (and therefore may be accessed |
| * by it) or exclusively owned by the DMA device. These helper functions |
| * represent the transitions between these two ownership states. |
| * |
| * Note, however, that on later ARMs, this notion does not work due to |
| * speculative prefetches. We model our approach on the assumption that |
| * the CPU does do speculative prefetches, which means we clean caches |
| * before transfers and delay cache invalidation until transfer completion. |
| * |
| * Private support functions: these are not part of the API and are |
| * liable to change. Drivers must not use these. |
| */ |
| static inline void __dma_single_cpu_to_dev(const void *kaddr, size_t size, |
| enum dma_data_direction dir) |
| { |
| extern void ___dma_single_cpu_to_dev(const void *, size_t, |
| enum dma_data_direction); |
| |
| if (!arch_is_coherent()) |
| ___dma_single_cpu_to_dev(kaddr, size, dir); |
| } |
| |
| static inline void __dma_single_dev_to_cpu(const void *kaddr, size_t size, |
| enum dma_data_direction dir) |
| { |
| extern void ___dma_single_dev_to_cpu(const void *, size_t, |
| enum dma_data_direction); |
| |
| if (!arch_is_coherent()) |
| ___dma_single_dev_to_cpu(kaddr, size, dir); |
| } |
| |
| static inline void __dma_page_cpu_to_dev(struct page *page, unsigned long off, |
| size_t size, enum dma_data_direction dir) |
| { |
| extern void ___dma_page_cpu_to_dev(struct page *, unsigned long, |
| size_t, enum dma_data_direction); |
| |
| if (!arch_is_coherent()) |
| ___dma_page_cpu_to_dev(page, off, size, dir); |
| } |
| |
| static inline void __dma_page_dev_to_cpu(struct page *page, unsigned long off, |
| size_t size, enum dma_data_direction dir) |
| { |
| extern void ___dma_page_dev_to_cpu(struct page *, unsigned long, |
| size_t, enum dma_data_direction); |
| |
| if (!arch_is_coherent()) |
| ___dma_page_dev_to_cpu(page, off, size, dir); |
| } |
| |
| extern int dma_supported(struct device *, u64); |
| extern int dma_set_mask(struct device *, u64); |
| |
| /* |
| * DMA errors are defined by all-bits-set in the DMA address. |
| */ |
| static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) |
| { |
| return dma_addr == ~0; |
| } |
| |
| /* |
| * Dummy noncoherent implementation. We don't provide a dma_cache_sync |
| * function so drivers using this API are highlighted with build warnings. |
| */ |
| static inline void *dma_alloc_noncoherent(struct device *dev, size_t size, |
| dma_addr_t *handle, gfp_t gfp) |
| { |
| return NULL; |
| } |
| |
| static inline void dma_free_noncoherent(struct device *dev, size_t size, |
| void *cpu_addr, dma_addr_t handle) |
| { |
| } |
| |
| /** |
| * dma_alloc_coherent - allocate consistent memory for DMA |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @size: required memory size |
| * @handle: bus-specific DMA address |
| * |
| * Allocate some uncached, unbuffered memory for a device for |
| * performing DMA. This function allocates pages, and will |
| * return the CPU-viewed address, and sets @handle to be the |
| * device-viewed address. |
| */ |
| extern void *dma_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t); |
| |
| /** |
| * dma_free_coherent - free memory allocated by dma_alloc_coherent |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @size: size of memory originally requested in dma_alloc_coherent |
| * @cpu_addr: CPU-view address returned from dma_alloc_coherent |
| * @handle: device-view address returned from dma_alloc_coherent |
| * |
| * Free (and unmap) a DMA buffer previously allocated by |
| * dma_alloc_coherent(). |
| * |
| * References to memory and mappings associated with cpu_addr/handle |
| * during and after this call executing are illegal. |
| */ |
| extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t); |
| |
| /** |
| * dma_mmap_coherent - map a coherent DMA allocation into user space |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @vma: vm_area_struct describing requested user mapping |
| * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent |
| * @handle: device-view address returned from dma_alloc_coherent |
| * @size: size of memory originally requested in dma_alloc_coherent |
| * |
| * Map a coherent DMA buffer previously allocated by dma_alloc_coherent |
| * into user space. The coherent DMA buffer must not be freed by the |
| * driver until the user space mapping has been released. |
| */ |
| int dma_mmap_coherent(struct device *, struct vm_area_struct *, |
| void *, dma_addr_t, size_t); |
| |
| |
| /** |
| * dma_alloc_writecombine - allocate writecombining memory for DMA |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @size: required memory size |
| * @handle: bus-specific DMA address |
| * |
| * Allocate some uncached, buffered memory for a device for |
| * performing DMA. This function allocates pages, and will |
| * return the CPU-viewed address, and sets @handle to be the |
| * device-viewed address. |
| */ |
| extern void *dma_alloc_writecombine(struct device *, size_t, dma_addr_t *, |
| gfp_t); |
| |
| #define dma_free_writecombine(dev,size,cpu_addr,handle) \ |
| dma_free_coherent(dev,size,cpu_addr,handle) |
| |
| int dma_mmap_writecombine(struct device *, struct vm_area_struct *, |
| void *, dma_addr_t, size_t); |
| |
| /* |
| * This can be called during boot to increase the size of the consistent |
| * DMA region above it's default value of 2MB. It must be called before the |
| * memory allocator is initialised, i.e. before any core_initcall. |
| */ |
| extern void __init init_consistent_dma_size(unsigned long size); |
| |
| |
| #ifdef CONFIG_DMABOUNCE |
| /* |
| * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic" |
| * and utilize bounce buffers as needed to work around limited DMA windows. |
| * |
| * On the SA-1111, a bug limits DMA to only certain regions of RAM. |
| * On the IXP425, the PCI inbound window is 64MB (256MB total RAM) |
| * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM) |
| * |
| * The following are helper functions used by the dmabounce subystem |
| * |
| */ |
| |
| /** |
| * dmabounce_register_dev |
| * |
| * @dev: valid struct device pointer |
| * @small_buf_size: size of buffers to use with small buffer pool |
| * @large_buf_size: size of buffers to use with large buffer pool (can be 0) |
| * @needs_bounce_fn: called to determine whether buffer needs bouncing |
| * |
| * This function should be called by low-level platform code to register |
| * a device as requireing DMA buffer bouncing. The function will allocate |
| * appropriate DMA pools for the device. |
| */ |
| extern int dmabounce_register_dev(struct device *, unsigned long, |
| unsigned long, int (*)(struct device *, dma_addr_t, size_t)); |
| |
| /** |
| * dmabounce_unregister_dev |
| * |
| * @dev: valid struct device pointer |
| * |
| * This function should be called by low-level platform code when device |
| * that was previously registered with dmabounce_register_dev is removed |
| * from the system. |
| * |
| */ |
| extern void dmabounce_unregister_dev(struct device *); |
| |
| /* |
| * The DMA API, implemented by dmabounce.c. See below for descriptions. |
| */ |
| extern dma_addr_t __dma_map_page(struct device *, struct page *, |
| unsigned long, size_t, enum dma_data_direction); |
| extern void __dma_unmap_page(struct device *, dma_addr_t, size_t, |
| enum dma_data_direction); |
| |
| /* |
| * Private functions |
| */ |
| int dmabounce_sync_for_cpu(struct device *, dma_addr_t, unsigned long, |
| size_t, enum dma_data_direction); |
| int dmabounce_sync_for_device(struct device *, dma_addr_t, unsigned long, |
| size_t, enum dma_data_direction); |
| #else |
| static inline int dmabounce_sync_for_cpu(struct device *d, dma_addr_t addr, |
| unsigned long offset, size_t size, enum dma_data_direction dir) |
| { |
| return 1; |
| } |
| |
| static inline int dmabounce_sync_for_device(struct device *d, dma_addr_t addr, |
| unsigned long offset, size_t size, enum dma_data_direction dir) |
| { |
| return 1; |
| } |
| |
| |
| static inline dma_addr_t __dma_map_page(struct device *dev, struct page *page, |
| unsigned long offset, size_t size, enum dma_data_direction dir) |
| { |
| __dma_page_cpu_to_dev(page, offset, size, dir); |
| return pfn_to_dma(dev, page_to_pfn(page)) + offset; |
| } |
| |
| static inline void __dma_unmap_page(struct device *dev, dma_addr_t handle, |
| size_t size, enum dma_data_direction dir) |
| { |
| __dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, handle)), |
| handle & ~PAGE_MASK, size, dir); |
| } |
| #endif /* CONFIG_DMABOUNCE */ |
| |
| /** |
| * dma_map_single - map a single buffer for streaming DMA |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @cpu_addr: CPU direct mapped address of buffer |
| * @size: size of buffer to map |
| * @dir: DMA transfer direction |
| * |
| * Ensure that any data held in the cache is appropriately discarded |
| * or written back. |
| * |
| * The device owns this memory once this call has completed. The CPU |
| * can regain ownership by calling dma_unmap_single() or |
| * dma_sync_single_for_cpu(). |
| */ |
| static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, |
| size_t size, enum dma_data_direction dir) |
| { |
| unsigned long offset; |
| struct page *page; |
| dma_addr_t addr; |
| |
| BUG_ON(!virt_addr_valid(cpu_addr)); |
| BUG_ON(!virt_addr_valid(cpu_addr + size - 1)); |
| BUG_ON(!valid_dma_direction(dir)); |
| |
| page = virt_to_page(cpu_addr); |
| offset = (unsigned long)cpu_addr & ~PAGE_MASK; |
| addr = __dma_map_page(dev, page, offset, size, dir); |
| debug_dma_map_page(dev, page, offset, size, dir, addr, true); |
| |
| return addr; |
| } |
| |
| /** |
| * dma_map_page - map a portion of a page for streaming DMA |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @page: page that buffer resides in |
| * @offset: offset into page for start of buffer |
| * @size: size of buffer to map |
| * @dir: DMA transfer direction |
| * |
| * Ensure that any data held in the cache is appropriately discarded |
| * or written back. |
| * |
| * The device owns this memory once this call has completed. The CPU |
| * can regain ownership by calling dma_unmap_page(). |
| */ |
| static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, |
| unsigned long offset, size_t size, enum dma_data_direction dir) |
| { |
| dma_addr_t addr; |
| |
| BUG_ON(!valid_dma_direction(dir)); |
| |
| addr = __dma_map_page(dev, page, offset, size, dir); |
| debug_dma_map_page(dev, page, offset, size, dir, addr, false); |
| |
| return addr; |
| } |
| |
| /** |
| * dma_unmap_single - unmap a single buffer previously mapped |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @handle: DMA address of buffer |
| * @size: size of buffer (same as passed to dma_map_single) |
| * @dir: DMA transfer direction (same as passed to dma_map_single) |
| * |
| * Unmap a single streaming mode DMA translation. The handle and size |
| * must match what was provided in the previous dma_map_single() call. |
| * All other usages are undefined. |
| * |
| * After this call, reads by the CPU to the buffer are guaranteed to see |
| * whatever the device wrote there. |
| */ |
| static inline void dma_unmap_single(struct device *dev, dma_addr_t handle, |
| size_t size, enum dma_data_direction dir) |
| { |
| debug_dma_unmap_page(dev, handle, size, dir, true); |
| __dma_unmap_page(dev, handle, size, dir); |
| } |
| |
| /** |
| * dma_unmap_page - unmap a buffer previously mapped through dma_map_page() |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @handle: DMA address of buffer |
| * @size: size of buffer (same as passed to dma_map_page) |
| * @dir: DMA transfer direction (same as passed to dma_map_page) |
| * |
| * Unmap a page streaming mode DMA translation. The handle and size |
| * must match what was provided in the previous dma_map_page() call. |
| * All other usages are undefined. |
| * |
| * After this call, reads by the CPU to the buffer are guaranteed to see |
| * whatever the device wrote there. |
| */ |
| static inline void dma_unmap_page(struct device *dev, dma_addr_t handle, |
| size_t size, enum dma_data_direction dir) |
| { |
| debug_dma_unmap_page(dev, handle, size, dir, false); |
| __dma_unmap_page(dev, handle, size, dir); |
| } |
| |
| /** |
| * dma_sync_single_range_for_cpu |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @handle: DMA address of buffer |
| * @offset: offset of region to start sync |
| * @size: size of region to sync |
| * @dir: DMA transfer direction (same as passed to dma_map_single) |
| * |
| * Make physical memory consistent for a single streaming mode DMA |
| * translation after a transfer. |
| * |
| * If you perform a dma_map_single() but wish to interrogate the |
| * buffer using the cpu, yet do not wish to teardown the PCI dma |
| * mapping, you must call this function before doing so. At the |
| * next point you give the PCI dma address back to the card, you |
| * must first the perform a dma_sync_for_device, and then the |
| * device again owns the buffer. |
| */ |
| static inline void dma_sync_single_range_for_cpu(struct device *dev, |
| dma_addr_t handle, unsigned long offset, size_t size, |
| enum dma_data_direction dir) |
| { |
| BUG_ON(!valid_dma_direction(dir)); |
| |
| debug_dma_sync_single_for_cpu(dev, handle + offset, size, dir); |
| |
| if (!dmabounce_sync_for_cpu(dev, handle, offset, size, dir)) |
| return; |
| |
| __dma_single_dev_to_cpu(dma_to_virt(dev, handle) + offset, size, dir); |
| } |
| |
| static inline void dma_sync_single_range_for_device(struct device *dev, |
| dma_addr_t handle, unsigned long offset, size_t size, |
| enum dma_data_direction dir) |
| { |
| BUG_ON(!valid_dma_direction(dir)); |
| |
| debug_dma_sync_single_for_device(dev, handle + offset, size, dir); |
| |
| if (!dmabounce_sync_for_device(dev, handle, offset, size, dir)) |
| return; |
| |
| __dma_single_cpu_to_dev(dma_to_virt(dev, handle) + offset, size, dir); |
| } |
| |
| static inline void dma_sync_single_for_cpu(struct device *dev, |
| dma_addr_t handle, size_t size, enum dma_data_direction dir) |
| { |
| dma_sync_single_range_for_cpu(dev, handle, 0, size, dir); |
| } |
| |
| static inline void dma_sync_single_for_device(struct device *dev, |
| dma_addr_t handle, size_t size, enum dma_data_direction dir) |
| { |
| dma_sync_single_range_for_device(dev, handle, 0, size, dir); |
| } |
| |
| /* |
| * The scatter list versions of the above methods. |
| */ |
| extern int dma_map_sg(struct device *, struct scatterlist *, int, |
| enum dma_data_direction); |
| extern void dma_unmap_sg(struct device *, struct scatterlist *, int, |
| enum dma_data_direction); |
| extern void dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int, |
| enum dma_data_direction); |
| extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int, |
| enum dma_data_direction); |
| |
| |
| #endif /* __KERNEL__ */ |
| #endif |