| /* |
| * arch/arm/mach-kirkwood/common.c |
| * |
| * Core functions for Marvell Kirkwood SoCs |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/serial_8250.h> |
| #include <linux/mbus.h> |
| #include <linux/ata_platform.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/dma-mapping.h> |
| #include <net/dsa.h> |
| #include <asm/page.h> |
| #include <asm/timex.h> |
| #include <asm/kexec.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/time.h> |
| #include <mach/kirkwood.h> |
| #include <mach/bridge-regs.h> |
| #include <plat/audio.h> |
| #include <plat/cache-feroceon-l2.h> |
| #include <plat/mvsdio.h> |
| #include <plat/orion_nand.h> |
| #include <plat/ehci-orion.h> |
| #include <plat/common.h> |
| #include <plat/time.h> |
| #include "common.h" |
| |
| /***************************************************************************** |
| * I/O Address Mapping |
| ****************************************************************************/ |
| static struct map_desc kirkwood_io_desc[] __initdata = { |
| { |
| .virtual = KIRKWOOD_PCIE_IO_VIRT_BASE, |
| .pfn = __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE), |
| .length = KIRKWOOD_PCIE_IO_SIZE, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = KIRKWOOD_PCIE1_IO_VIRT_BASE, |
| .pfn = __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE), |
| .length = KIRKWOOD_PCIE1_IO_SIZE, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = KIRKWOOD_REGS_VIRT_BASE, |
| .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), |
| .length = KIRKWOOD_REGS_SIZE, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| void __init kirkwood_map_io(void) |
| { |
| iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); |
| } |
| |
| /* |
| * Default clock control bits. Any bit _not_ set in this variable |
| * will be cleared from the hardware after platform devices have been |
| * registered. Some reserved bits must be set to 1. |
| */ |
| unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; |
| |
| |
| /***************************************************************************** |
| * EHCI0 |
| ****************************************************************************/ |
| void __init kirkwood_ehci_init(void) |
| { |
| kirkwood_clk_ctrl |= CGC_USB0; |
| orion_ehci_init(&kirkwood_mbus_dram_info, |
| USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA); |
| } |
| |
| |
| /***************************************************************************** |
| * GE00 |
| ****************************************************************************/ |
| void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) |
| { |
| kirkwood_clk_ctrl |= CGC_GE0; |
| |
| orion_ge00_init(eth_data, &kirkwood_mbus_dram_info, |
| GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, |
| IRQ_KIRKWOOD_GE00_ERR, kirkwood_tclk); |
| } |
| |
| |
| /***************************************************************************** |
| * GE01 |
| ****************************************************************************/ |
| void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) |
| { |
| |
| kirkwood_clk_ctrl |= CGC_GE1; |
| |
| orion_ge01_init(eth_data, &kirkwood_mbus_dram_info, |
| GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, |
| IRQ_KIRKWOOD_GE01_ERR, kirkwood_tclk); |
| } |
| |
| |
| /***************************************************************************** |
| * Ethernet switch |
| ****************************************************************************/ |
| void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq) |
| { |
| orion_ge00_switch_init(d, irq); |
| } |
| |
| |
| /***************************************************************************** |
| * NAND flash |
| ****************************************************************************/ |
| static struct resource kirkwood_nand_resource = { |
| .flags = IORESOURCE_MEM, |
| .start = KIRKWOOD_NAND_MEM_PHYS_BASE, |
| .end = KIRKWOOD_NAND_MEM_PHYS_BASE + |
| KIRKWOOD_NAND_MEM_SIZE - 1, |
| }; |
| |
| static struct orion_nand_data kirkwood_nand_data = { |
| .cle = 0, |
| .ale = 1, |
| .width = 8, |
| }; |
| |
| static struct platform_device kirkwood_nand_flash = { |
| .name = "orion_nand", |
| .id = -1, |
| .dev = { |
| .platform_data = &kirkwood_nand_data, |
| }, |
| .resource = &kirkwood_nand_resource, |
| .num_resources = 1, |
| }; |
| |
| void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, |
| int chip_delay) |
| { |
| kirkwood_clk_ctrl |= CGC_RUNIT; |
| kirkwood_nand_data.parts = parts; |
| kirkwood_nand_data.nr_parts = nr_parts; |
| kirkwood_nand_data.chip_delay = chip_delay; |
| platform_device_register(&kirkwood_nand_flash); |
| } |
| |
| void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, |
| int (*dev_ready)(struct mtd_info *)) |
| { |
| kirkwood_clk_ctrl |= CGC_RUNIT; |
| kirkwood_nand_data.parts = parts; |
| kirkwood_nand_data.nr_parts = nr_parts; |
| kirkwood_nand_data.dev_ready = dev_ready; |
| platform_device_register(&kirkwood_nand_flash); |
| } |
| |
| /***************************************************************************** |
| * SoC RTC |
| ****************************************************************************/ |
| static void __init kirkwood_rtc_init(void) |
| { |
| orion_rtc_init(RTC_PHYS_BASE, IRQ_KIRKWOOD_RTC); |
| } |
| |
| |
| /***************************************************************************** |
| * SATA |
| ****************************************************************************/ |
| void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data) |
| { |
| kirkwood_clk_ctrl |= CGC_SATA0; |
| if (sata_data->n_ports > 1) |
| kirkwood_clk_ctrl |= CGC_SATA1; |
| |
| orion_sata_init(sata_data, &kirkwood_mbus_dram_info, |
| SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA); |
| } |
| |
| |
| /***************************************************************************** |
| * SD/SDIO/MMC |
| ****************************************************************************/ |
| static struct resource mvsdio_resources[] = { |
| [0] = { |
| .start = SDIO_PHYS_BASE, |
| .end = SDIO_PHYS_BASE + SZ_1K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_KIRKWOOD_SDIO, |
| .end = IRQ_KIRKWOOD_SDIO, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static u64 mvsdio_dmamask = DMA_BIT_MASK(32); |
| |
| static struct platform_device kirkwood_sdio = { |
| .name = "mvsdio", |
| .id = -1, |
| .dev = { |
| .dma_mask = &mvsdio_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| .num_resources = ARRAY_SIZE(mvsdio_resources), |
| .resource = mvsdio_resources, |
| }; |
| |
| void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) |
| { |
| u32 dev, rev; |
| |
| kirkwood_pcie_id(&dev, &rev); |
| if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */ |
| mvsdio_data->clock = 100000000; |
| else |
| mvsdio_data->clock = 200000000; |
| mvsdio_data->dram = &kirkwood_mbus_dram_info; |
| kirkwood_clk_ctrl |= CGC_SDIO; |
| kirkwood_sdio.dev.platform_data = mvsdio_data; |
| platform_device_register(&kirkwood_sdio); |
| } |
| |
| |
| /***************************************************************************** |
| * SPI |
| ****************************************************************************/ |
| void __init kirkwood_spi_init() |
| { |
| kirkwood_clk_ctrl |= CGC_RUNIT; |
| orion_spi_init(SPI_PHYS_BASE, kirkwood_tclk); |
| } |
| |
| |
| /***************************************************************************** |
| * I2C |
| ****************************************************************************/ |
| void __init kirkwood_i2c_init(void) |
| { |
| orion_i2c_init(I2C_PHYS_BASE, IRQ_KIRKWOOD_TWSI, 8); |
| } |
| |
| |
| /***************************************************************************** |
| * UART0 |
| ****************************************************************************/ |
| |
| void __init kirkwood_uart0_init(void) |
| { |
| orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, |
| IRQ_KIRKWOOD_UART_0, kirkwood_tclk); |
| } |
| |
| |
| /***************************************************************************** |
| * UART1 |
| ****************************************************************************/ |
| void __init kirkwood_uart1_init(void) |
| { |
| orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, |
| IRQ_KIRKWOOD_UART_1, kirkwood_tclk); |
| } |
| |
| /***************************************************************************** |
| * Cryptographic Engines and Security Accelerator (CESA) |
| ****************************************************************************/ |
| void __init kirkwood_crypto_init(void) |
| { |
| kirkwood_clk_ctrl |= CGC_CRYPTO; |
| orion_crypto_init(CRYPTO_PHYS_BASE, KIRKWOOD_SRAM_PHYS_BASE, |
| KIRKWOOD_SRAM_SIZE, IRQ_KIRKWOOD_CRYPTO); |
| } |
| |
| |
| /***************************************************************************** |
| * XOR0 |
| ****************************************************************************/ |
| static void __init kirkwood_xor0_init(void) |
| { |
| kirkwood_clk_ctrl |= CGC_XOR0; |
| |
| orion_xor0_init(&kirkwood_mbus_dram_info, |
| XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE, |
| IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01); |
| } |
| |
| |
| /***************************************************************************** |
| * XOR1 |
| ****************************************************************************/ |
| static void __init kirkwood_xor1_init(void) |
| { |
| kirkwood_clk_ctrl |= CGC_XOR1; |
| |
| orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE, |
| IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11); |
| } |
| |
| |
| /***************************************************************************** |
| * Watchdog |
| ****************************************************************************/ |
| static void __init kirkwood_wdt_init(void) |
| { |
| orion_wdt_init(kirkwood_tclk); |
| } |
| |
| |
| /***************************************************************************** |
| * Time handling |
| ****************************************************************************/ |
| void __init kirkwood_init_early(void) |
| { |
| orion_time_set_base(TIMER_VIRT_BASE); |
| } |
| |
| int kirkwood_tclk; |
| |
| static int __init kirkwood_find_tclk(void) |
| { |
| u32 dev, rev; |
| |
| kirkwood_pcie_id(&dev, &rev); |
| |
| if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID) |
| if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0) |
| return 200000000; |
| |
| return 166666667; |
| } |
| |
| static void __init kirkwood_timer_init(void) |
| { |
| kirkwood_tclk = kirkwood_find_tclk(); |
| |
| orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, |
| IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); |
| } |
| |
| struct sys_timer kirkwood_timer = { |
| .init = kirkwood_timer_init, |
| }; |
| |
| /***************************************************************************** |
| * Audio |
| ****************************************************************************/ |
| static struct resource kirkwood_i2s_resources[] = { |
| [0] = { |
| .start = AUDIO_PHYS_BASE, |
| .end = AUDIO_PHYS_BASE + SZ_16K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_KIRKWOOD_I2S, |
| .end = IRQ_KIRKWOOD_I2S, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct kirkwood_asoc_platform_data kirkwood_i2s_data = { |
| .dram = &kirkwood_mbus_dram_info, |
| .burst = 128, |
| }; |
| |
| static struct platform_device kirkwood_i2s_device = { |
| .name = "kirkwood-i2s", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(kirkwood_i2s_resources), |
| .resource = kirkwood_i2s_resources, |
| .dev = { |
| .platform_data = &kirkwood_i2s_data, |
| }, |
| }; |
| |
| static struct platform_device kirkwood_pcm_device = { |
| .name = "kirkwood-pcm-audio", |
| .id = -1, |
| }; |
| |
| void __init kirkwood_audio_init(void) |
| { |
| kirkwood_clk_ctrl |= CGC_AUDIO; |
| platform_device_register(&kirkwood_i2s_device); |
| platform_device_register(&kirkwood_pcm_device); |
| } |
| |
| /***************************************************************************** |
| * General |
| ****************************************************************************/ |
| /* |
| * Identify device ID and revision. |
| */ |
| static char * __init kirkwood_id(void) |
| { |
| u32 dev, rev; |
| |
| kirkwood_pcie_id(&dev, &rev); |
| |
| if (dev == MV88F6281_DEV_ID) { |
| if (rev == MV88F6281_REV_Z0) |
| return "MV88F6281-Z0"; |
| else if (rev == MV88F6281_REV_A0) |
| return "MV88F6281-A0"; |
| else if (rev == MV88F6281_REV_A1) |
| return "MV88F6281-A1"; |
| else |
| return "MV88F6281-Rev-Unsupported"; |
| } else if (dev == MV88F6192_DEV_ID) { |
| if (rev == MV88F6192_REV_Z0) |
| return "MV88F6192-Z0"; |
| else if (rev == MV88F6192_REV_A0) |
| return "MV88F6192-A0"; |
| else if (rev == MV88F6192_REV_A1) |
| return "MV88F6192-A1"; |
| else |
| return "MV88F6192-Rev-Unsupported"; |
| } else if (dev == MV88F6180_DEV_ID) { |
| if (rev == MV88F6180_REV_A0) |
| return "MV88F6180-Rev-A0"; |
| else if (rev == MV88F6180_REV_A1) |
| return "MV88F6180-Rev-A1"; |
| else |
| return "MV88F6180-Rev-Unsupported"; |
| } else if (dev == MV88F6282_DEV_ID) { |
| if (rev == MV88F6282_REV_A0) |
| return "MV88F6282-Rev-A0"; |
| else |
| return "MV88F6282-Rev-Unsupported"; |
| } else { |
| return "Device-Unknown"; |
| } |
| } |
| |
| static void __init kirkwood_l2_init(void) |
| { |
| #ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH |
| writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG); |
| feroceon_l2_init(1); |
| #else |
| writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG); |
| feroceon_l2_init(0); |
| #endif |
| } |
| |
| void __init kirkwood_init(void) |
| { |
| printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n", |
| kirkwood_id(), kirkwood_tclk); |
| kirkwood_i2s_data.tclk = kirkwood_tclk; |
| |
| /* |
| * Disable propagation of mbus errors to the CPU local bus, |
| * as this causes mbus errors (which can occur for example |
| * for PCI aborts) to throw CPU aborts, which we're not set |
| * up to deal with. |
| */ |
| writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); |
| |
| kirkwood_setup_cpu_mbus(); |
| |
| #ifdef CONFIG_CACHE_FEROCEON_L2 |
| kirkwood_l2_init(); |
| #endif |
| |
| /* internal devices that every board has */ |
| kirkwood_rtc_init(); |
| kirkwood_wdt_init(); |
| kirkwood_xor0_init(); |
| kirkwood_xor1_init(); |
| kirkwood_crypto_init(); |
| |
| #ifdef CONFIG_KEXEC |
| kexec_reinit = kirkwood_enable_pcie; |
| #endif |
| } |
| |
| static int __init kirkwood_clock_gate(void) |
| { |
| unsigned int curr = readl(CLOCK_GATING_CTRL); |
| u32 dev, rev; |
| |
| kirkwood_pcie_id(&dev, &rev); |
| printk(KERN_DEBUG "Gating clock of unused units\n"); |
| printk(KERN_DEBUG "before: 0x%08x\n", curr); |
| |
| /* Make sure those units are accessible */ |
| writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL); |
| |
| /* For SATA: first shutdown the phy */ |
| if (!(kirkwood_clk_ctrl & CGC_SATA0)) { |
| /* Disable PLL and IVREF */ |
| writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2); |
| /* Disable PHY */ |
| writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL); |
| } |
| if (!(kirkwood_clk_ctrl & CGC_SATA1)) { |
| /* Disable PLL and IVREF */ |
| writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2); |
| /* Disable PHY */ |
| writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL); |
| } |
| |
| /* For PCIe: first shutdown the phy */ |
| if (!(kirkwood_clk_ctrl & CGC_PEX0)) { |
| writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL); |
| while (1) |
| if (readl(PCIE_STATUS) & 0x1) |
| break; |
| writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL); |
| } |
| |
| /* For PCIe 1: first shutdown the phy */ |
| if (dev == MV88F6282_DEV_ID) { |
| if (!(kirkwood_clk_ctrl & CGC_PEX1)) { |
| writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL); |
| while (1) |
| if (readl(PCIE1_STATUS) & 0x1) |
| break; |
| writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL); |
| } |
| } else /* keep this bit set for devices that don't have PCIe1 */ |
| kirkwood_clk_ctrl |= CGC_PEX1; |
| |
| /* Now gate clock the required units */ |
| writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL); |
| printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL)); |
| |
| return 0; |
| } |
| late_initcall(kirkwood_clock_gate); |