| /* |
| * Versatile Express V2M Motherboard Support |
| */ |
| #include <linux/device.h> |
| #include <linux/amba/bus.h> |
| #include <linux/amba/mmci.h> |
| #include <linux/io.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/ata_platform.h> |
| #include <linux/smsc911x.h> |
| #include <linux/spinlock.h> |
| #include <linux/sysdev.h> |
| #include <linux/usb/isp1760.h> |
| #include <linux/clkdev.h> |
| #include <linux/mtd/physmap.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/sizes.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/time.h> |
| #include <asm/hardware/arm_timer.h> |
| #include <asm/hardware/timer-sp.h> |
| #include <asm/hardware/sp810.h> |
| |
| #include <mach/ct-ca9x4.h> |
| #include <mach/motherboard.h> |
| |
| #include <plat/sched_clock.h> |
| |
| #include "core.h" |
| |
| #define V2M_PA_CS0 0x40000000 |
| #define V2M_PA_CS1 0x44000000 |
| #define V2M_PA_CS2 0x48000000 |
| #define V2M_PA_CS3 0x4c000000 |
| #define V2M_PA_CS7 0x10000000 |
| |
| static struct map_desc v2m_io_desc[] __initdata = { |
| { |
| .virtual = __MMIO_P2V(V2M_PA_CS7), |
| .pfn = __phys_to_pfn(V2M_PA_CS7), |
| .length = SZ_128K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| static void __init v2m_timer_init(void) |
| { |
| u32 scctrl; |
| |
| /* Select 1MHz TIMCLK as the reference clock for SP804 timers */ |
| scctrl = readl(MMIO_P2V(V2M_SYSCTL + SCCTRL)); |
| scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK; |
| scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK; |
| writel(scctrl, MMIO_P2V(V2M_SYSCTL + SCCTRL)); |
| |
| writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL); |
| writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL); |
| |
| sp804_clocksource_init(MMIO_P2V(V2M_TIMER1), "v2m-timer1"); |
| sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0, |
| "v2m-timer0"); |
| } |
| |
| static struct sys_timer v2m_timer = { |
| .init = v2m_timer_init, |
| }; |
| |
| |
| static DEFINE_SPINLOCK(v2m_cfg_lock); |
| |
| int v2m_cfg_write(u32 devfn, u32 data) |
| { |
| /* Configuration interface broken? */ |
| u32 val; |
| |
| printk("%s: writing %08x to %08x\n", __func__, data, devfn); |
| |
| devfn |= SYS_CFG_START | SYS_CFG_WRITE; |
| |
| spin_lock(&v2m_cfg_lock); |
| val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); |
| writel(val & ~SYS_CFG_COMPLETE, MMIO_P2V(V2M_SYS_CFGSTAT)); |
| |
| writel(data, MMIO_P2V(V2M_SYS_CFGDATA)); |
| writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL)); |
| |
| do { |
| val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); |
| } while (val == 0); |
| spin_unlock(&v2m_cfg_lock); |
| |
| return !!(val & SYS_CFG_ERR); |
| } |
| |
| int v2m_cfg_read(u32 devfn, u32 *data) |
| { |
| u32 val; |
| |
| devfn |= SYS_CFG_START; |
| |
| spin_lock(&v2m_cfg_lock); |
| writel(0, MMIO_P2V(V2M_SYS_CFGSTAT)); |
| writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL)); |
| |
| mb(); |
| |
| do { |
| cpu_relax(); |
| val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); |
| } while (val == 0); |
| |
| *data = readl(MMIO_P2V(V2M_SYS_CFGDATA)); |
| spin_unlock(&v2m_cfg_lock); |
| |
| return !!(val & SYS_CFG_ERR); |
| } |
| |
| |
| static struct resource v2m_pcie_i2c_resource = { |
| .start = V2M_SERIAL_BUS_PCI, |
| .end = V2M_SERIAL_BUS_PCI + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct platform_device v2m_pcie_i2c_device = { |
| .name = "versatile-i2c", |
| .id = 0, |
| .num_resources = 1, |
| .resource = &v2m_pcie_i2c_resource, |
| }; |
| |
| static struct resource v2m_ddc_i2c_resource = { |
| .start = V2M_SERIAL_BUS_DVI, |
| .end = V2M_SERIAL_BUS_DVI + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct platform_device v2m_ddc_i2c_device = { |
| .name = "versatile-i2c", |
| .id = 1, |
| .num_resources = 1, |
| .resource = &v2m_ddc_i2c_resource, |
| }; |
| |
| static struct resource v2m_eth_resources[] = { |
| { |
| .start = V2M_LAN9118, |
| .end = V2M_LAN9118 + SZ_64K - 1, |
| .flags = IORESOURCE_MEM, |
| }, { |
| .start = IRQ_V2M_LAN9118, |
| .end = IRQ_V2M_LAN9118, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct smsc911x_platform_config v2m_eth_config = { |
| .flags = SMSC911X_USE_32BIT, |
| .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, |
| .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, |
| .phy_interface = PHY_INTERFACE_MODE_MII, |
| }; |
| |
| static struct platform_device v2m_eth_device = { |
| .name = "smsc911x", |
| .id = -1, |
| .resource = v2m_eth_resources, |
| .num_resources = ARRAY_SIZE(v2m_eth_resources), |
| .dev.platform_data = &v2m_eth_config, |
| }; |
| |
| static struct resource v2m_usb_resources[] = { |
| { |
| .start = V2M_ISP1761, |
| .end = V2M_ISP1761 + SZ_128K - 1, |
| .flags = IORESOURCE_MEM, |
| }, { |
| .start = IRQ_V2M_ISP1761, |
| .end = IRQ_V2M_ISP1761, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct isp1760_platform_data v2m_usb_config = { |
| .is_isp1761 = true, |
| .bus_width_16 = false, |
| .port1_otg = true, |
| .analog_oc = false, |
| .dack_polarity_high = false, |
| .dreq_polarity_high = false, |
| }; |
| |
| static struct platform_device v2m_usb_device = { |
| .name = "isp1760", |
| .id = -1, |
| .resource = v2m_usb_resources, |
| .num_resources = ARRAY_SIZE(v2m_usb_resources), |
| .dev.platform_data = &v2m_usb_config, |
| }; |
| |
| static void v2m_flash_set_vpp(struct platform_device *pdev, int on) |
| { |
| writel(on != 0, MMIO_P2V(V2M_SYS_FLASH)); |
| } |
| |
| static struct physmap_flash_data v2m_flash_data = { |
| .width = 4, |
| .set_vpp = v2m_flash_set_vpp, |
| }; |
| |
| static struct resource v2m_flash_resources[] = { |
| { |
| .start = V2M_NOR0, |
| .end = V2M_NOR0 + SZ_64M - 1, |
| .flags = IORESOURCE_MEM, |
| }, { |
| .start = V2M_NOR1, |
| .end = V2M_NOR1 + SZ_64M - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct platform_device v2m_flash_device = { |
| .name = "physmap-flash", |
| .id = -1, |
| .resource = v2m_flash_resources, |
| .num_resources = ARRAY_SIZE(v2m_flash_resources), |
| .dev.platform_data = &v2m_flash_data, |
| }; |
| |
| static struct pata_platform_info v2m_pata_data = { |
| .ioport_shift = 2, |
| }; |
| |
| static struct resource v2m_pata_resources[] = { |
| { |
| .start = V2M_CF, |
| .end = V2M_CF + 0xff, |
| .flags = IORESOURCE_MEM, |
| }, { |
| .start = V2M_CF + 0x100, |
| .end = V2M_CF + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct platform_device v2m_cf_device = { |
| .name = "pata_platform", |
| .id = -1, |
| .resource = v2m_pata_resources, |
| .num_resources = ARRAY_SIZE(v2m_pata_resources), |
| .dev.platform_data = &v2m_pata_data, |
| }; |
| |
| static unsigned int v2m_mmci_status(struct device *dev) |
| { |
| return readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0); |
| } |
| |
| static struct mmci_platform_data v2m_mmci_data = { |
| .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| .status = v2m_mmci_status, |
| }; |
| |
| static AMBA_DEVICE(aaci, "mb:aaci", V2M_AACI, NULL); |
| static AMBA_DEVICE(mmci, "mb:mmci", V2M_MMCI, &v2m_mmci_data); |
| static AMBA_DEVICE(kmi0, "mb:kmi0", V2M_KMI0, NULL); |
| static AMBA_DEVICE(kmi1, "mb:kmi1", V2M_KMI1, NULL); |
| static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL); |
| static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL); |
| static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL); |
| static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL); |
| static AMBA_DEVICE(wdt, "mb:wdt", V2M_WDT, NULL); |
| static AMBA_DEVICE(rtc, "mb:rtc", V2M_RTC, NULL); |
| |
| static struct amba_device *v2m_amba_devs[] __initdata = { |
| &aaci_device, |
| &mmci_device, |
| &kmi0_device, |
| &kmi1_device, |
| &uart0_device, |
| &uart1_device, |
| &uart2_device, |
| &uart3_device, |
| &wdt_device, |
| &rtc_device, |
| }; |
| |
| |
| static long v2m_osc_round(struct clk *clk, unsigned long rate) |
| { |
| return rate; |
| } |
| |
| static int v2m_osc1_set(struct clk *clk, unsigned long rate) |
| { |
| return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_MB | 1, rate); |
| } |
| |
| static const struct clk_ops osc1_clk_ops = { |
| .round = v2m_osc_round, |
| .set = v2m_osc1_set, |
| }; |
| |
| static struct clk osc1_clk = { |
| .ops = &osc1_clk_ops, |
| .rate = 24000000, |
| }; |
| |
| static struct clk osc2_clk = { |
| .rate = 24000000, |
| }; |
| |
| static struct clk v2m_sp804_clk = { |
| .rate = 1000000, |
| }; |
| |
| static struct clk v2m_ref_clk = { |
| .rate = 32768, |
| }; |
| |
| static struct clk dummy_apb_pclk; |
| |
| static struct clk_lookup v2m_lookups[] = { |
| { /* AMBA bus clock */ |
| .con_id = "apb_pclk", |
| .clk = &dummy_apb_pclk, |
| }, { /* UART0 */ |
| .dev_id = "mb:uart0", |
| .clk = &osc2_clk, |
| }, { /* UART1 */ |
| .dev_id = "mb:uart1", |
| .clk = &osc2_clk, |
| }, { /* UART2 */ |
| .dev_id = "mb:uart2", |
| .clk = &osc2_clk, |
| }, { /* UART3 */ |
| .dev_id = "mb:uart3", |
| .clk = &osc2_clk, |
| }, { /* KMI0 */ |
| .dev_id = "mb:kmi0", |
| .clk = &osc2_clk, |
| }, { /* KMI1 */ |
| .dev_id = "mb:kmi1", |
| .clk = &osc2_clk, |
| }, { /* MMC0 */ |
| .dev_id = "mb:mmci", |
| .clk = &osc2_clk, |
| }, { /* CLCD */ |
| .dev_id = "mb:clcd", |
| .clk = &osc1_clk, |
| }, { /* SP805 WDT */ |
| .dev_id = "mb:wdt", |
| .clk = &v2m_ref_clk, |
| }, { /* SP804 timers */ |
| .dev_id = "sp804", |
| .con_id = "v2m-timer0", |
| .clk = &v2m_sp804_clk, |
| }, { /* SP804 timers */ |
| .dev_id = "sp804", |
| .con_id = "v2m-timer1", |
| .clk = &v2m_sp804_clk, |
| }, |
| }; |
| |
| static void __init v2m_init_early(void) |
| { |
| ct_desc->init_early(); |
| clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups)); |
| versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); |
| } |
| |
| static void v2m_power_off(void) |
| { |
| if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0)) |
| printk(KERN_EMERG "Unable to shutdown\n"); |
| } |
| |
| static void v2m_restart(char str, const char *cmd) |
| { |
| if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0)) |
| printk(KERN_EMERG "Unable to reboot\n"); |
| } |
| |
| struct ct_desc *ct_desc; |
| |
| static struct ct_desc *ct_descs[] __initdata = { |
| #ifdef CONFIG_ARCH_VEXPRESS_CA9X4 |
| &ct_ca9x4_desc, |
| #endif |
| }; |
| |
| static void __init v2m_populate_ct_desc(void) |
| { |
| int i; |
| u32 current_tile_id; |
| |
| ct_desc = NULL; |
| current_tile_id = readl(MMIO_P2V(V2M_SYS_PROCID0)) & V2M_CT_ID_MASK; |
| |
| for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i) |
| if (ct_descs[i]->id == current_tile_id) |
| ct_desc = ct_descs[i]; |
| |
| if (!ct_desc) |
| panic("vexpress: failed to populate core tile description " |
| "for tile ID 0x%8x\n", current_tile_id); |
| } |
| |
| static void __init v2m_map_io(void) |
| { |
| iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); |
| v2m_populate_ct_desc(); |
| ct_desc->map_io(); |
| } |
| |
| static void __init v2m_init_irq(void) |
| { |
| ct_desc->init_irq(); |
| } |
| |
| static void __init v2m_init(void) |
| { |
| int i; |
| |
| platform_device_register(&v2m_pcie_i2c_device); |
| platform_device_register(&v2m_ddc_i2c_device); |
| platform_device_register(&v2m_flash_device); |
| platform_device_register(&v2m_cf_device); |
| platform_device_register(&v2m_eth_device); |
| platform_device_register(&v2m_usb_device); |
| |
| for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++) |
| amba_device_register(v2m_amba_devs[i], &iomem_resource); |
| |
| pm_power_off = v2m_power_off; |
| arm_pm_restart = v2m_restart; |
| |
| ct_desc->init_tile(); |
| } |
| |
| MACHINE_START(VEXPRESS, "ARM-Versatile Express") |
| .atag_offset = 0x100, |
| .map_io = v2m_map_io, |
| .init_early = v2m_init_early, |
| .init_irq = v2m_init_irq, |
| .timer = &v2m_timer, |
| .init_machine = v2m_init, |
| MACHINE_END |