| /* |
| * davinci_mmc.c - TI DaVinci MMC/SD/SDIO driver |
| * |
| * Copyright (C) 2006 Texas Instruments. |
| * Original author: Purushotam Kumar |
| * Copyright (C) 2009 David Brownell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/ioport.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/cpufreq.h> |
| #include <linux/mmc/host.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/mmc/mmc.h> |
| |
| #include <mach/mmc.h> |
| #include <mach/edma.h> |
| |
| /* |
| * Register Definitions |
| */ |
| #define DAVINCI_MMCCTL 0x00 /* Control Register */ |
| #define DAVINCI_MMCCLK 0x04 /* Memory Clock Control Register */ |
| #define DAVINCI_MMCST0 0x08 /* Status Register 0 */ |
| #define DAVINCI_MMCST1 0x0C /* Status Register 1 */ |
| #define DAVINCI_MMCIM 0x10 /* Interrupt Mask Register */ |
| #define DAVINCI_MMCTOR 0x14 /* Response Time-Out Register */ |
| #define DAVINCI_MMCTOD 0x18 /* Data Read Time-Out Register */ |
| #define DAVINCI_MMCBLEN 0x1C /* Block Length Register */ |
| #define DAVINCI_MMCNBLK 0x20 /* Number of Blocks Register */ |
| #define DAVINCI_MMCNBLC 0x24 /* Number of Blocks Counter Register */ |
| #define DAVINCI_MMCDRR 0x28 /* Data Receive Register */ |
| #define DAVINCI_MMCDXR 0x2C /* Data Transmit Register */ |
| #define DAVINCI_MMCCMD 0x30 /* Command Register */ |
| #define DAVINCI_MMCARGHL 0x34 /* Argument Register */ |
| #define DAVINCI_MMCRSP01 0x38 /* Response Register 0 and 1 */ |
| #define DAVINCI_MMCRSP23 0x3C /* Response Register 0 and 1 */ |
| #define DAVINCI_MMCRSP45 0x40 /* Response Register 0 and 1 */ |
| #define DAVINCI_MMCRSP67 0x44 /* Response Register 0 and 1 */ |
| #define DAVINCI_MMCDRSP 0x48 /* Data Response Register */ |
| #define DAVINCI_MMCETOK 0x4C |
| #define DAVINCI_MMCCIDX 0x50 /* Command Index Register */ |
| #define DAVINCI_MMCCKC 0x54 |
| #define DAVINCI_MMCTORC 0x58 |
| #define DAVINCI_MMCTODC 0x5C |
| #define DAVINCI_MMCBLNC 0x60 |
| #define DAVINCI_SDIOCTL 0x64 |
| #define DAVINCI_SDIOST0 0x68 |
| #define DAVINCI_SDIOIEN 0x6C |
| #define DAVINCI_SDIOIST 0x70 |
| #define DAVINCI_MMCFIFOCTL 0x74 /* FIFO Control Register */ |
| |
| /* DAVINCI_MMCCTL definitions */ |
| #define MMCCTL_DATRST (1 << 0) |
| #define MMCCTL_CMDRST (1 << 1) |
| #define MMCCTL_WIDTH_8_BIT (1 << 8) |
| #define MMCCTL_WIDTH_4_BIT (1 << 2) |
| #define MMCCTL_DATEG_DISABLED (0 << 6) |
| #define MMCCTL_DATEG_RISING (1 << 6) |
| #define MMCCTL_DATEG_FALLING (2 << 6) |
| #define MMCCTL_DATEG_BOTH (3 << 6) |
| #define MMCCTL_PERMDR_LE (0 << 9) |
| #define MMCCTL_PERMDR_BE (1 << 9) |
| #define MMCCTL_PERMDX_LE (0 << 10) |
| #define MMCCTL_PERMDX_BE (1 << 10) |
| |
| /* DAVINCI_MMCCLK definitions */ |
| #define MMCCLK_CLKEN (1 << 8) |
| #define MMCCLK_CLKRT_MASK (0xFF << 0) |
| |
| /* IRQ bit definitions, for DAVINCI_MMCST0 and DAVINCI_MMCIM */ |
| #define MMCST0_DATDNE BIT(0) /* data done */ |
| #define MMCST0_BSYDNE BIT(1) /* busy done */ |
| #define MMCST0_RSPDNE BIT(2) /* command done */ |
| #define MMCST0_TOUTRD BIT(3) /* data read timeout */ |
| #define MMCST0_TOUTRS BIT(4) /* command response timeout */ |
| #define MMCST0_CRCWR BIT(5) /* data write CRC error */ |
| #define MMCST0_CRCRD BIT(6) /* data read CRC error */ |
| #define MMCST0_CRCRS BIT(7) /* command response CRC error */ |
| #define MMCST0_DXRDY BIT(9) /* data transmit ready (fifo empty) */ |
| #define MMCST0_DRRDY BIT(10) /* data receive ready (data in fifo)*/ |
| #define MMCST0_DATED BIT(11) /* DAT3 edge detect */ |
| #define MMCST0_TRNDNE BIT(12) /* transfer done */ |
| |
| /* DAVINCI_MMCST1 definitions */ |
| #define MMCST1_BUSY (1 << 0) |
| |
| /* DAVINCI_MMCCMD definitions */ |
| #define MMCCMD_CMD_MASK (0x3F << 0) |
| #define MMCCMD_PPLEN (1 << 7) |
| #define MMCCMD_BSYEXP (1 << 8) |
| #define MMCCMD_RSPFMT_MASK (3 << 9) |
| #define MMCCMD_RSPFMT_NONE (0 << 9) |
| #define MMCCMD_RSPFMT_R1456 (1 << 9) |
| #define MMCCMD_RSPFMT_R2 (2 << 9) |
| #define MMCCMD_RSPFMT_R3 (3 << 9) |
| #define MMCCMD_DTRW (1 << 11) |
| #define MMCCMD_STRMTP (1 << 12) |
| #define MMCCMD_WDATX (1 << 13) |
| #define MMCCMD_INITCK (1 << 14) |
| #define MMCCMD_DCLR (1 << 15) |
| #define MMCCMD_DMATRIG (1 << 16) |
| |
| /* DAVINCI_MMCFIFOCTL definitions */ |
| #define MMCFIFOCTL_FIFORST (1 << 0) |
| #define MMCFIFOCTL_FIFODIR_WR (1 << 1) |
| #define MMCFIFOCTL_FIFODIR_RD (0 << 1) |
| #define MMCFIFOCTL_FIFOLEV (1 << 2) /* 0 = 128 bits, 1 = 256 bits */ |
| #define MMCFIFOCTL_ACCWD_4 (0 << 3) /* access width of 4 bytes */ |
| #define MMCFIFOCTL_ACCWD_3 (1 << 3) /* access width of 3 bytes */ |
| #define MMCFIFOCTL_ACCWD_2 (2 << 3) /* access width of 2 bytes */ |
| #define MMCFIFOCTL_ACCWD_1 (3 << 3) /* access width of 1 byte */ |
| |
| /* DAVINCI_SDIOST0 definitions */ |
| #define SDIOST0_DAT1_HI BIT(0) |
| |
| /* DAVINCI_SDIOIEN definitions */ |
| #define SDIOIEN_IOINTEN BIT(0) |
| |
| /* DAVINCI_SDIOIST definitions */ |
| #define SDIOIST_IOINT BIT(0) |
| |
| /* MMCSD Init clock in Hz in opendrain mode */ |
| #define MMCSD_INIT_CLOCK 200000 |
| |
| /* |
| * One scatterlist dma "segment" is at most MAX_CCNT rw_threshold units, |
| * and we handle up to MAX_NR_SG segments. MMC_BLOCK_BOUNCE kicks in only |
| * for drivers with max_segs == 1, making the segments bigger (64KB) |
| * than the page or two that's otherwise typical. nr_sg (passed from |
| * platform data) == 16 gives at least the same throughput boost, using |
| * EDMA transfer linkage instead of spending CPU time copying pages. |
| */ |
| #define MAX_CCNT ((1 << 16) - 1) |
| |
| #define MAX_NR_SG 16 |
| |
| static unsigned rw_threshold = 32; |
| module_param(rw_threshold, uint, S_IRUGO); |
| MODULE_PARM_DESC(rw_threshold, |
| "Read/Write threshold. Default = 32"); |
| |
| static unsigned __initdata use_dma = 1; |
| module_param(use_dma, uint, 0); |
| MODULE_PARM_DESC(use_dma, "Whether to use DMA or not. Default = 1"); |
| |
| struct mmc_davinci_host { |
| struct mmc_command *cmd; |
| struct mmc_data *data; |
| struct mmc_host *mmc; |
| struct clk *clk; |
| unsigned int mmc_input_clk; |
| void __iomem *base; |
| struct resource *mem_res; |
| int mmc_irq, sdio_irq; |
| unsigned char bus_mode; |
| |
| #define DAVINCI_MMC_DATADIR_NONE 0 |
| #define DAVINCI_MMC_DATADIR_READ 1 |
| #define DAVINCI_MMC_DATADIR_WRITE 2 |
| unsigned char data_dir; |
| unsigned char suspended; |
| |
| /* buffer is used during PIO of one scatterlist segment, and |
| * is updated along with buffer_bytes_left. bytes_left applies |
| * to all N blocks of the PIO transfer. |
| */ |
| u8 *buffer; |
| u32 buffer_bytes_left; |
| u32 bytes_left; |
| |
| u32 rxdma, txdma; |
| bool use_dma; |
| bool do_dma; |
| bool sdio_int; |
| |
| /* Scatterlist DMA uses one or more parameter RAM entries: |
| * the main one (associated with rxdma or txdma) plus zero or |
| * more links. The entries for a given transfer differ only |
| * by memory buffer (address, length) and link field. |
| */ |
| struct edmacc_param tx_template; |
| struct edmacc_param rx_template; |
| unsigned n_link; |
| u32 links[MAX_NR_SG - 1]; |
| |
| /* For PIO we walk scatterlists one segment at a time. */ |
| unsigned int sg_len; |
| struct scatterlist *sg; |
| |
| /* Version of the MMC/SD controller */ |
| u8 version; |
| /* for ns in one cycle calculation */ |
| unsigned ns_in_one_cycle; |
| /* Number of sg segments */ |
| u8 nr_sg; |
| #ifdef CONFIG_CPU_FREQ |
| struct notifier_block freq_transition; |
| #endif |
| }; |
| |
| |
| /* PIO only */ |
| static void mmc_davinci_sg_to_buf(struct mmc_davinci_host *host) |
| { |
| host->buffer_bytes_left = sg_dma_len(host->sg); |
| host->buffer = sg_virt(host->sg); |
| if (host->buffer_bytes_left > host->bytes_left) |
| host->buffer_bytes_left = host->bytes_left; |
| } |
| |
| static void davinci_fifo_data_trans(struct mmc_davinci_host *host, |
| unsigned int n) |
| { |
| u8 *p; |
| unsigned int i; |
| |
| if (host->buffer_bytes_left == 0) { |
| host->sg = sg_next(host->data->sg); |
| mmc_davinci_sg_to_buf(host); |
| } |
| |
| p = host->buffer; |
| if (n > host->buffer_bytes_left) |
| n = host->buffer_bytes_left; |
| host->buffer_bytes_left -= n; |
| host->bytes_left -= n; |
| |
| /* NOTE: we never transfer more than rw_threshold bytes |
| * to/from the fifo here; there's no I/O overlap. |
| * This also assumes that access width( i.e. ACCWD) is 4 bytes |
| */ |
| if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) { |
| for (i = 0; i < (n >> 2); i++) { |
| writel(*((u32 *)p), host->base + DAVINCI_MMCDXR); |
| p = p + 4; |
| } |
| if (n & 3) { |
| iowrite8_rep(host->base + DAVINCI_MMCDXR, p, (n & 3)); |
| p = p + (n & 3); |
| } |
| } else { |
| for (i = 0; i < (n >> 2); i++) { |
| *((u32 *)p) = readl(host->base + DAVINCI_MMCDRR); |
| p = p + 4; |
| } |
| if (n & 3) { |
| ioread8_rep(host->base + DAVINCI_MMCDRR, p, (n & 3)); |
| p = p + (n & 3); |
| } |
| } |
| host->buffer = p; |
| } |
| |
| static void mmc_davinci_start_command(struct mmc_davinci_host *host, |
| struct mmc_command *cmd) |
| { |
| u32 cmd_reg = 0; |
| u32 im_val; |
| |
| dev_dbg(mmc_dev(host->mmc), "CMD%d, arg 0x%08x%s\n", |
| cmd->opcode, cmd->arg, |
| ({ char *s; |
| switch (mmc_resp_type(cmd)) { |
| case MMC_RSP_R1: |
| s = ", R1/R5/R6/R7 response"; |
| break; |
| case MMC_RSP_R1B: |
| s = ", R1b response"; |
| break; |
| case MMC_RSP_R2: |
| s = ", R2 response"; |
| break; |
| case MMC_RSP_R3: |
| s = ", R3/R4 response"; |
| break; |
| default: |
| s = ", (R? response)"; |
| break; |
| }; s; })); |
| host->cmd = cmd; |
| |
| switch (mmc_resp_type(cmd)) { |
| case MMC_RSP_R1B: |
| /* There's some spec confusion about when R1B is |
| * allowed, but if the card doesn't issue a BUSY |
| * then it's harmless for us to allow it. |
| */ |
| cmd_reg |= MMCCMD_BSYEXP; |
| /* FALLTHROUGH */ |
| case MMC_RSP_R1: /* 48 bits, CRC */ |
| cmd_reg |= MMCCMD_RSPFMT_R1456; |
| break; |
| case MMC_RSP_R2: /* 136 bits, CRC */ |
| cmd_reg |= MMCCMD_RSPFMT_R2; |
| break; |
| case MMC_RSP_R3: /* 48 bits, no CRC */ |
| cmd_reg |= MMCCMD_RSPFMT_R3; |
| break; |
| default: |
| cmd_reg |= MMCCMD_RSPFMT_NONE; |
| dev_dbg(mmc_dev(host->mmc), "unknown resp_type %04x\n", |
| mmc_resp_type(cmd)); |
| break; |
| } |
| |
| /* Set command index */ |
| cmd_reg |= cmd->opcode; |
| |
| /* Enable EDMA transfer triggers */ |
| if (host->do_dma) |
| cmd_reg |= MMCCMD_DMATRIG; |
| |
| if (host->version == MMC_CTLR_VERSION_2 && host->data != NULL && |
| host->data_dir == DAVINCI_MMC_DATADIR_READ) |
| cmd_reg |= MMCCMD_DMATRIG; |
| |
| /* Setting whether command involves data transfer or not */ |
| if (cmd->data) |
| cmd_reg |= MMCCMD_WDATX; |
| |
| /* Setting whether stream or block transfer */ |
| if (cmd->flags & MMC_DATA_STREAM) |
| cmd_reg |= MMCCMD_STRMTP; |
| |
| /* Setting whether data read or write */ |
| if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) |
| cmd_reg |= MMCCMD_DTRW; |
| |
| if (host->bus_mode == MMC_BUSMODE_PUSHPULL) |
| cmd_reg |= MMCCMD_PPLEN; |
| |
| /* set Command timeout */ |
| writel(0x1FFF, host->base + DAVINCI_MMCTOR); |
| |
| /* Enable interrupt (calculate here, defer until FIFO is stuffed). */ |
| im_val = MMCST0_RSPDNE | MMCST0_CRCRS | MMCST0_TOUTRS; |
| if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) { |
| im_val |= MMCST0_DATDNE | MMCST0_CRCWR; |
| |
| if (!host->do_dma) |
| im_val |= MMCST0_DXRDY; |
| } else if (host->data_dir == DAVINCI_MMC_DATADIR_READ) { |
| im_val |= MMCST0_DATDNE | MMCST0_CRCRD | MMCST0_TOUTRD; |
| |
| if (!host->do_dma) |
| im_val |= MMCST0_DRRDY; |
| } |
| |
| /* |
| * Before non-DMA WRITE commands the controller needs priming: |
| * FIFO should be populated with 32 bytes i.e. whatever is the FIFO size |
| */ |
| if (!host->do_dma && (host->data_dir == DAVINCI_MMC_DATADIR_WRITE)) |
| davinci_fifo_data_trans(host, rw_threshold); |
| |
| writel(cmd->arg, host->base + DAVINCI_MMCARGHL); |
| writel(cmd_reg, host->base + DAVINCI_MMCCMD); |
| writel(im_val, host->base + DAVINCI_MMCIM); |
| } |
| |
| /*----------------------------------------------------------------------*/ |
| |
| /* DMA infrastructure */ |
| |
| static void davinci_abort_dma(struct mmc_davinci_host *host) |
| { |
| int sync_dev; |
| |
| if (host->data_dir == DAVINCI_MMC_DATADIR_READ) |
| sync_dev = host->rxdma; |
| else |
| sync_dev = host->txdma; |
| |
| edma_stop(sync_dev); |
| edma_clean_channel(sync_dev); |
| } |
| |
| static void |
| mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data); |
| |
| static void mmc_davinci_dma_cb(unsigned channel, u16 ch_status, void *data) |
| { |
| if (DMA_COMPLETE != ch_status) { |
| struct mmc_davinci_host *host = data; |
| |
| /* Currently means: DMA Event Missed, or "null" transfer |
| * request was seen. In the future, TC errors (like bad |
| * addresses) might be presented too. |
| */ |
| dev_warn(mmc_dev(host->mmc), "DMA %s error\n", |
| (host->data->flags & MMC_DATA_WRITE) |
| ? "write" : "read"); |
| host->data->error = -EIO; |
| mmc_davinci_xfer_done(host, host->data); |
| } |
| } |
| |
| /* Set up tx or rx template, to be modified and updated later */ |
| static void __init mmc_davinci_dma_setup(struct mmc_davinci_host *host, |
| bool tx, struct edmacc_param *template) |
| { |
| unsigned sync_dev; |
| const u16 acnt = 4; |
| const u16 bcnt = rw_threshold >> 2; |
| const u16 ccnt = 0; |
| u32 src_port = 0; |
| u32 dst_port = 0; |
| s16 src_bidx, dst_bidx; |
| s16 src_cidx, dst_cidx; |
| |
| /* |
| * A-B Sync transfer: each DMA request is for one "frame" of |
| * rw_threshold bytes, broken into "acnt"-size chunks repeated |
| * "bcnt" times. Each segment needs "ccnt" such frames; since |
| * we tell the block layer our mmc->max_seg_size limit, we can |
| * trust (later) that it's within bounds. |
| * |
| * The FIFOs are read/written in 4-byte chunks (acnt == 4) and |
| * EDMA will optimize memory operations to use larger bursts. |
| */ |
| if (tx) { |
| sync_dev = host->txdma; |
| |
| /* src_prt, ccnt, and link to be set up later */ |
| src_bidx = acnt; |
| src_cidx = acnt * bcnt; |
| |
| dst_port = host->mem_res->start + DAVINCI_MMCDXR; |
| dst_bidx = 0; |
| dst_cidx = 0; |
| } else { |
| sync_dev = host->rxdma; |
| |
| src_port = host->mem_res->start + DAVINCI_MMCDRR; |
| src_bidx = 0; |
| src_cidx = 0; |
| |
| /* dst_prt, ccnt, and link to be set up later */ |
| dst_bidx = acnt; |
| dst_cidx = acnt * bcnt; |
| } |
| |
| /* |
| * We can't use FIFO mode for the FIFOs because MMC FIFO addresses |
| * are not 256-bit (32-byte) aligned. So we use INCR, and the W8BIT |
| * parameter is ignored. |
| */ |
| edma_set_src(sync_dev, src_port, INCR, W8BIT); |
| edma_set_dest(sync_dev, dst_port, INCR, W8BIT); |
| |
| edma_set_src_index(sync_dev, src_bidx, src_cidx); |
| edma_set_dest_index(sync_dev, dst_bidx, dst_cidx); |
| |
| edma_set_transfer_params(sync_dev, acnt, bcnt, ccnt, 8, ABSYNC); |
| |
| edma_read_slot(sync_dev, template); |
| |
| /* don't bother with irqs or chaining */ |
| template->opt |= EDMA_CHAN_SLOT(sync_dev) << 12; |
| } |
| |
| static void mmc_davinci_send_dma_request(struct mmc_davinci_host *host, |
| struct mmc_data *data) |
| { |
| struct edmacc_param *template; |
| int channel, slot; |
| unsigned link; |
| struct scatterlist *sg; |
| unsigned sg_len; |
| unsigned bytes_left = host->bytes_left; |
| const unsigned shift = ffs(rw_threshold) - 1; |
| |
| if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) { |
| template = &host->tx_template; |
| channel = host->txdma; |
| } else { |
| template = &host->rx_template; |
| channel = host->rxdma; |
| } |
| |
| /* We know sg_len and ccnt will never be out of range because |
| * we told the mmc layer which in turn tells the block layer |
| * to ensure that it only hands us one scatterlist segment |
| * per EDMA PARAM entry. Update the PARAM |
| * entries needed for each segment of this scatterlist. |
| */ |
| for (slot = channel, link = 0, sg = data->sg, sg_len = host->sg_len; |
| sg_len-- != 0 && bytes_left; |
| sg = sg_next(sg), slot = host->links[link++]) { |
| u32 buf = sg_dma_address(sg); |
| unsigned count = sg_dma_len(sg); |
| |
| template->link_bcntrld = sg_len |
| ? (EDMA_CHAN_SLOT(host->links[link]) << 5) |
| : 0xffff; |
| |
| if (count > bytes_left) |
| count = bytes_left; |
| bytes_left -= count; |
| |
| if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) |
| template->src = buf; |
| else |
| template->dst = buf; |
| template->ccnt = count >> shift; |
| |
| edma_write_slot(slot, template); |
| } |
| |
| if (host->version == MMC_CTLR_VERSION_2) |
| edma_clear_event(channel); |
| |
| edma_start(channel); |
| } |
| |
| static int mmc_davinci_start_dma_transfer(struct mmc_davinci_host *host, |
| struct mmc_data *data) |
| { |
| int i; |
| int mask = rw_threshold - 1; |
| |
| host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, |
| ((data->flags & MMC_DATA_WRITE) |
| ? DMA_TO_DEVICE |
| : DMA_FROM_DEVICE)); |
| |
| /* no individual DMA segment should need a partial FIFO */ |
| for (i = 0; i < host->sg_len; i++) { |
| if (sg_dma_len(data->sg + i) & mask) { |
| dma_unmap_sg(mmc_dev(host->mmc), |
| data->sg, data->sg_len, |
| (data->flags & MMC_DATA_WRITE) |
| ? DMA_TO_DEVICE |
| : DMA_FROM_DEVICE); |
| return -1; |
| } |
| } |
| |
| host->do_dma = 1; |
| mmc_davinci_send_dma_request(host, data); |
| |
| return 0; |
| } |
| |
| static void __init_or_module |
| davinci_release_dma_channels(struct mmc_davinci_host *host) |
| { |
| unsigned i; |
| |
| if (!host->use_dma) |
| return; |
| |
| for (i = 0; i < host->n_link; i++) |
| edma_free_slot(host->links[i]); |
| |
| edma_free_channel(host->txdma); |
| edma_free_channel(host->rxdma); |
| } |
| |
| static int __init davinci_acquire_dma_channels(struct mmc_davinci_host *host) |
| { |
| u32 link_size; |
| int r, i; |
| |
| /* Acquire master DMA write channel */ |
| r = edma_alloc_channel(host->txdma, mmc_davinci_dma_cb, host, |
| EVENTQ_DEFAULT); |
| if (r < 0) { |
| dev_warn(mmc_dev(host->mmc), "alloc %s channel err %d\n", |
| "tx", r); |
| return r; |
| } |
| mmc_davinci_dma_setup(host, true, &host->tx_template); |
| |
| /* Acquire master DMA read channel */ |
| r = edma_alloc_channel(host->rxdma, mmc_davinci_dma_cb, host, |
| EVENTQ_DEFAULT); |
| if (r < 0) { |
| dev_warn(mmc_dev(host->mmc), "alloc %s channel err %d\n", |
| "rx", r); |
| goto free_master_write; |
| } |
| mmc_davinci_dma_setup(host, false, &host->rx_template); |
| |
| /* Allocate parameter RAM slots, which will later be bound to a |
| * channel as needed to handle a scatterlist. |
| */ |
| link_size = min_t(unsigned, host->nr_sg, ARRAY_SIZE(host->links)); |
| for (i = 0; i < link_size; i++) { |
| r = edma_alloc_slot(EDMA_CTLR(host->txdma), EDMA_SLOT_ANY); |
| if (r < 0) { |
| dev_dbg(mmc_dev(host->mmc), "dma PaRAM alloc --> %d\n", |
| r); |
| break; |
| } |
| host->links[i] = r; |
| } |
| host->n_link = i; |
| |
| return 0; |
| |
| free_master_write: |
| edma_free_channel(host->txdma); |
| |
| return r; |
| } |
| |
| /*----------------------------------------------------------------------*/ |
| |
| static void |
| mmc_davinci_prepare_data(struct mmc_davinci_host *host, struct mmc_request *req) |
| { |
| int fifo_lev = (rw_threshold == 32) ? MMCFIFOCTL_FIFOLEV : 0; |
| int timeout; |
| struct mmc_data *data = req->data; |
| |
| if (host->version == MMC_CTLR_VERSION_2) |
| fifo_lev = (rw_threshold == 64) ? MMCFIFOCTL_FIFOLEV : 0; |
| |
| host->data = data; |
| if (data == NULL) { |
| host->data_dir = DAVINCI_MMC_DATADIR_NONE; |
| writel(0, host->base + DAVINCI_MMCBLEN); |
| writel(0, host->base + DAVINCI_MMCNBLK); |
| return; |
| } |
| |
| dev_dbg(mmc_dev(host->mmc), "%s %s, %d blocks of %d bytes\n", |
| (data->flags & MMC_DATA_STREAM) ? "stream" : "block", |
| (data->flags & MMC_DATA_WRITE) ? "write" : "read", |
| data->blocks, data->blksz); |
| dev_dbg(mmc_dev(host->mmc), " DTO %d cycles + %d ns\n", |
| data->timeout_clks, data->timeout_ns); |
| timeout = data->timeout_clks + |
| (data->timeout_ns / host->ns_in_one_cycle); |
| if (timeout > 0xffff) |
| timeout = 0xffff; |
| |
| writel(timeout, host->base + DAVINCI_MMCTOD); |
| writel(data->blocks, host->base + DAVINCI_MMCNBLK); |
| writel(data->blksz, host->base + DAVINCI_MMCBLEN); |
| |
| /* Configure the FIFO */ |
| switch (data->flags & MMC_DATA_WRITE) { |
| case MMC_DATA_WRITE: |
| host->data_dir = DAVINCI_MMC_DATADIR_WRITE; |
| writel(fifo_lev | MMCFIFOCTL_FIFODIR_WR | MMCFIFOCTL_FIFORST, |
| host->base + DAVINCI_MMCFIFOCTL); |
| writel(fifo_lev | MMCFIFOCTL_FIFODIR_WR, |
| host->base + DAVINCI_MMCFIFOCTL); |
| break; |
| |
| default: |
| host->data_dir = DAVINCI_MMC_DATADIR_READ; |
| writel(fifo_lev | MMCFIFOCTL_FIFODIR_RD | MMCFIFOCTL_FIFORST, |
| host->base + DAVINCI_MMCFIFOCTL); |
| writel(fifo_lev | MMCFIFOCTL_FIFODIR_RD, |
| host->base + DAVINCI_MMCFIFOCTL); |
| break; |
| } |
| |
| host->buffer = NULL; |
| host->bytes_left = data->blocks * data->blksz; |
| |
| /* For now we try to use DMA whenever we won't need partial FIFO |
| * reads or writes, either for the whole transfer (as tested here) |
| * or for any individual scatterlist segment (tested when we call |
| * start_dma_transfer). |
| * |
| * While we *could* change that, unusual block sizes are rarely |
| * used. The occasional fallback to PIO should't hurt. |
| */ |
| if (host->use_dma && (host->bytes_left & (rw_threshold - 1)) == 0 |
| && mmc_davinci_start_dma_transfer(host, data) == 0) { |
| /* zero this to ensure we take no PIO paths */ |
| host->bytes_left = 0; |
| } else { |
| /* Revert to CPU Copy */ |
| host->sg_len = data->sg_len; |
| host->sg = host->data->sg; |
| mmc_davinci_sg_to_buf(host); |
| } |
| } |
| |
| static void mmc_davinci_request(struct mmc_host *mmc, struct mmc_request *req) |
| { |
| struct mmc_davinci_host *host = mmc_priv(mmc); |
| unsigned long timeout = jiffies + msecs_to_jiffies(900); |
| u32 mmcst1 = 0; |
| |
| /* Card may still be sending BUSY after a previous operation, |
| * typically some kind of write. If so, we can't proceed yet. |
| */ |
| while (time_before(jiffies, timeout)) { |
| mmcst1 = readl(host->base + DAVINCI_MMCST1); |
| if (!(mmcst1 & MMCST1_BUSY)) |
| break; |
| cpu_relax(); |
| } |
| if (mmcst1 & MMCST1_BUSY) { |
| dev_err(mmc_dev(host->mmc), "still BUSY? bad ... \n"); |
| req->cmd->error = -ETIMEDOUT; |
| mmc_request_done(mmc, req); |
| return; |
| } |
| |
| host->do_dma = 0; |
| mmc_davinci_prepare_data(host, req); |
| mmc_davinci_start_command(host, req->cmd); |
| } |
| |
| static unsigned int calculate_freq_for_card(struct mmc_davinci_host *host, |
| unsigned int mmc_req_freq) |
| { |
| unsigned int mmc_freq = 0, mmc_pclk = 0, mmc_push_pull_divisor = 0; |
| |
| mmc_pclk = host->mmc_input_clk; |
| if (mmc_req_freq && mmc_pclk > (2 * mmc_req_freq)) |
| mmc_push_pull_divisor = ((unsigned int)mmc_pclk |
| / (2 * mmc_req_freq)) - 1; |
| else |
| mmc_push_pull_divisor = 0; |
| |
| mmc_freq = (unsigned int)mmc_pclk |
| / (2 * (mmc_push_pull_divisor + 1)); |
| |
| if (mmc_freq > mmc_req_freq) |
| mmc_push_pull_divisor = mmc_push_pull_divisor + 1; |
| /* Convert ns to clock cycles */ |
| if (mmc_req_freq <= 400000) |
| host->ns_in_one_cycle = (1000000) / (((mmc_pclk |
| / (2 * (mmc_push_pull_divisor + 1)))/1000)); |
| else |
| host->ns_in_one_cycle = (1000000) / (((mmc_pclk |
| / (2 * (mmc_push_pull_divisor + 1)))/1000000)); |
| |
| return mmc_push_pull_divisor; |
| } |
| |
| static void calculate_clk_divider(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| unsigned int open_drain_freq = 0, mmc_pclk = 0; |
| unsigned int mmc_push_pull_freq = 0; |
| struct mmc_davinci_host *host = mmc_priv(mmc); |
| |
| if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) { |
| u32 temp; |
| |
| /* Ignoring the init clock value passed for fixing the inter |
| * operability with different cards. |
| */ |
| open_drain_freq = ((unsigned int)mmc_pclk |
| / (2 * MMCSD_INIT_CLOCK)) - 1; |
| |
| if (open_drain_freq > 0xFF) |
| open_drain_freq = 0xFF; |
| |
| temp = readl(host->base + DAVINCI_MMCCLK) & ~MMCCLK_CLKRT_MASK; |
| temp |= open_drain_freq; |
| writel(temp, host->base + DAVINCI_MMCCLK); |
| |
| /* Convert ns to clock cycles */ |
| host->ns_in_one_cycle = (1000000) / (MMCSD_INIT_CLOCK/1000); |
| } else { |
| u32 temp; |
| mmc_push_pull_freq = calculate_freq_for_card(host, ios->clock); |
| |
| if (mmc_push_pull_freq > 0xFF) |
| mmc_push_pull_freq = 0xFF; |
| |
| temp = readl(host->base + DAVINCI_MMCCLK) & ~MMCCLK_CLKEN; |
| writel(temp, host->base + DAVINCI_MMCCLK); |
| |
| udelay(10); |
| |
| temp = readl(host->base + DAVINCI_MMCCLK) & ~MMCCLK_CLKRT_MASK; |
| temp |= mmc_push_pull_freq; |
| writel(temp, host->base + DAVINCI_MMCCLK); |
| |
| writel(temp | MMCCLK_CLKEN, host->base + DAVINCI_MMCCLK); |
| |
| udelay(10); |
| } |
| } |
| |
| static void mmc_davinci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct mmc_davinci_host *host = mmc_priv(mmc); |
| struct platform_device *pdev = to_platform_device(mmc->parent); |
| struct davinci_mmc_config *config = pdev->dev.platform_data; |
| |
| dev_dbg(mmc_dev(host->mmc), |
| "clock %dHz busmode %d powermode %d Vdd %04x\n", |
| ios->clock, ios->bus_mode, ios->power_mode, |
| ios->vdd); |
| |
| switch (ios->power_mode) { |
| case MMC_POWER_OFF: |
| if (config && config->set_power) |
| config->set_power(pdev->id, false); |
| break; |
| case MMC_POWER_UP: |
| if (config && config->set_power) |
| config->set_power(pdev->id, true); |
| break; |
| } |
| |
| switch (ios->bus_width) { |
| case MMC_BUS_WIDTH_8: |
| dev_dbg(mmc_dev(host->mmc), "Enabling 8 bit mode\n"); |
| writel((readl(host->base + DAVINCI_MMCCTL) & |
| ~MMCCTL_WIDTH_4_BIT) | MMCCTL_WIDTH_8_BIT, |
| host->base + DAVINCI_MMCCTL); |
| break; |
| case MMC_BUS_WIDTH_4: |
| dev_dbg(mmc_dev(host->mmc), "Enabling 4 bit mode\n"); |
| if (host->version == MMC_CTLR_VERSION_2) |
| writel((readl(host->base + DAVINCI_MMCCTL) & |
| ~MMCCTL_WIDTH_8_BIT) | MMCCTL_WIDTH_4_BIT, |
| host->base + DAVINCI_MMCCTL); |
| else |
| writel(readl(host->base + DAVINCI_MMCCTL) | |
| MMCCTL_WIDTH_4_BIT, |
| host->base + DAVINCI_MMCCTL); |
| break; |
| case MMC_BUS_WIDTH_1: |
| dev_dbg(mmc_dev(host->mmc), "Enabling 1 bit mode\n"); |
| if (host->version == MMC_CTLR_VERSION_2) |
| writel(readl(host->base + DAVINCI_MMCCTL) & |
| ~(MMCCTL_WIDTH_8_BIT | MMCCTL_WIDTH_4_BIT), |
| host->base + DAVINCI_MMCCTL); |
| else |
| writel(readl(host->base + DAVINCI_MMCCTL) & |
| ~MMCCTL_WIDTH_4_BIT, |
| host->base + DAVINCI_MMCCTL); |
| break; |
| } |
| |
| calculate_clk_divider(mmc, ios); |
| |
| host->bus_mode = ios->bus_mode; |
| if (ios->power_mode == MMC_POWER_UP) { |
| unsigned long timeout = jiffies + msecs_to_jiffies(50); |
| bool lose = true; |
| |
| /* Send clock cycles, poll completion */ |
| writel(0, host->base + DAVINCI_MMCARGHL); |
| writel(MMCCMD_INITCK, host->base + DAVINCI_MMCCMD); |
| while (time_before(jiffies, timeout)) { |
| u32 tmp = readl(host->base + DAVINCI_MMCST0); |
| |
| if (tmp & MMCST0_RSPDNE) { |
| lose = false; |
| break; |
| } |
| cpu_relax(); |
| } |
| if (lose) |
| dev_warn(mmc_dev(host->mmc), "powerup timeout\n"); |
| } |
| |
| /* FIXME on power OFF, reset things ... */ |
| } |
| |
| static void |
| mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data) |
| { |
| host->data = NULL; |
| |
| if (host->mmc->caps & MMC_CAP_SDIO_IRQ) { |
| /* |
| * SDIO Interrupt Detection work-around as suggested by |
| * Davinci Errata (TMS320DM355 Silicon Revision 1.1 Errata |
| * 2.1.6): Signal SDIO interrupt only if it is enabled by core |
| */ |
| if (host->sdio_int && !(readl(host->base + DAVINCI_SDIOST0) & |
| SDIOST0_DAT1_HI)) { |
| writel(SDIOIST_IOINT, host->base + DAVINCI_SDIOIST); |
| mmc_signal_sdio_irq(host->mmc); |
| } |
| } |
| |
| if (host->do_dma) { |
| davinci_abort_dma(host); |
| |
| dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, |
| (data->flags & MMC_DATA_WRITE) |
| ? DMA_TO_DEVICE |
| : DMA_FROM_DEVICE); |
| host->do_dma = false; |
| } |
| host->data_dir = DAVINCI_MMC_DATADIR_NONE; |
| |
| if (!data->stop || (host->cmd && host->cmd->error)) { |
| mmc_request_done(host->mmc, data->mrq); |
| writel(0, host->base + DAVINCI_MMCIM); |
| } else |
| mmc_davinci_start_command(host, data->stop); |
| } |
| |
| static void mmc_davinci_cmd_done(struct mmc_davinci_host *host, |
| struct mmc_command *cmd) |
| { |
| host->cmd = NULL; |
| |
| if (cmd->flags & MMC_RSP_PRESENT) { |
| if (cmd->flags & MMC_RSP_136) { |
| /* response type 2 */ |
| cmd->resp[3] = readl(host->base + DAVINCI_MMCRSP01); |
| cmd->resp[2] = readl(host->base + DAVINCI_MMCRSP23); |
| cmd->resp[1] = readl(host->base + DAVINCI_MMCRSP45); |
| cmd->resp[0] = readl(host->base + DAVINCI_MMCRSP67); |
| } else { |
| /* response types 1, 1b, 3, 4, 5, 6 */ |
| cmd->resp[0] = readl(host->base + DAVINCI_MMCRSP67); |
| } |
| } |
| |
| if (host->data == NULL || cmd->error) { |
| if (cmd->error == -ETIMEDOUT) |
| cmd->mrq->cmd->retries = 0; |
| mmc_request_done(host->mmc, cmd->mrq); |
| writel(0, host->base + DAVINCI_MMCIM); |
| } |
| } |
| |
| static inline void mmc_davinci_reset_ctrl(struct mmc_davinci_host *host, |
| int val) |
| { |
| u32 temp; |
| |
| temp = readl(host->base + DAVINCI_MMCCTL); |
| if (val) /* reset */ |
| temp |= MMCCTL_CMDRST | MMCCTL_DATRST; |
| else /* enable */ |
| temp &= ~(MMCCTL_CMDRST | MMCCTL_DATRST); |
| |
| writel(temp, host->base + DAVINCI_MMCCTL); |
| udelay(10); |
| } |
| |
| static void |
| davinci_abort_data(struct mmc_davinci_host *host, struct mmc_data *data) |
| { |
| mmc_davinci_reset_ctrl(host, 1); |
| mmc_davinci_reset_ctrl(host, 0); |
| } |
| |
| static irqreturn_t mmc_davinci_sdio_irq(int irq, void *dev_id) |
| { |
| struct mmc_davinci_host *host = dev_id; |
| unsigned int status; |
| |
| status = readl(host->base + DAVINCI_SDIOIST); |
| if (status & SDIOIST_IOINT) { |
| dev_dbg(mmc_dev(host->mmc), |
| "SDIO interrupt status %x\n", status); |
| writel(status | SDIOIST_IOINT, host->base + DAVINCI_SDIOIST); |
| mmc_signal_sdio_irq(host->mmc); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t mmc_davinci_irq(int irq, void *dev_id) |
| { |
| struct mmc_davinci_host *host = (struct mmc_davinci_host *)dev_id; |
| unsigned int status, qstatus; |
| int end_command = 0; |
| int end_transfer = 0; |
| struct mmc_data *data = host->data; |
| |
| if (host->cmd == NULL && host->data == NULL) { |
| status = readl(host->base + DAVINCI_MMCST0); |
| dev_dbg(mmc_dev(host->mmc), |
| "Spurious interrupt 0x%04x\n", status); |
| /* Disable the interrupt from mmcsd */ |
| writel(0, host->base + DAVINCI_MMCIM); |
| return IRQ_NONE; |
| } |
| |
| status = readl(host->base + DAVINCI_MMCST0); |
| qstatus = status; |
| |
| /* handle FIFO first when using PIO for data. |
| * bytes_left will decrease to zero as I/O progress and status will |
| * read zero over iteration because this controller status |
| * register(MMCST0) reports any status only once and it is cleared |
| * by read. So, it is not unbouned loop even in the case of |
| * non-dma. |
| */ |
| while (host->bytes_left && (status & (MMCST0_DXRDY | MMCST0_DRRDY))) { |
| davinci_fifo_data_trans(host, rw_threshold); |
| status = readl(host->base + DAVINCI_MMCST0); |
| if (!status) |
| break; |
| qstatus |= status; |
| } |
| |
| if (qstatus & MMCST0_DATDNE) { |
| /* All blocks sent/received, and CRC checks passed */ |
| if (data != NULL) { |
| if ((host->do_dma == 0) && (host->bytes_left > 0)) { |
| /* if datasize < rw_threshold |
| * no RX ints are generated |
| */ |
| davinci_fifo_data_trans(host, host->bytes_left); |
| } |
| end_transfer = 1; |
| data->bytes_xfered = data->blocks * data->blksz; |
| } else { |
| dev_err(mmc_dev(host->mmc), |
| "DATDNE with no host->data\n"); |
| } |
| } |
| |
| if (qstatus & MMCST0_TOUTRD) { |
| /* Read data timeout */ |
| data->error = -ETIMEDOUT; |
| end_transfer = 1; |
| |
| dev_dbg(mmc_dev(host->mmc), |
| "read data timeout, status %x\n", |
| qstatus); |
| |
| davinci_abort_data(host, data); |
| } |
| |
| if (qstatus & (MMCST0_CRCWR | MMCST0_CRCRD)) { |
| /* Data CRC error */ |
| data->error = -EILSEQ; |
| end_transfer = 1; |
| |
| /* NOTE: this controller uses CRCWR to report both CRC |
| * errors and timeouts (on writes). MMCDRSP values are |
| * only weakly documented, but 0x9f was clearly a timeout |
| * case and the two three-bit patterns in various SD specs |
| * (101, 010) aren't part of it ... |
| */ |
| if (qstatus & MMCST0_CRCWR) { |
| u32 temp = readb(host->base + DAVINCI_MMCDRSP); |
| |
| if (temp == 0x9f) |
| data->error = -ETIMEDOUT; |
| } |
| dev_dbg(mmc_dev(host->mmc), "data %s %s error\n", |
| (qstatus & MMCST0_CRCWR) ? "write" : "read", |
| (data->error == -ETIMEDOUT) ? "timeout" : "CRC"); |
| |
| davinci_abort_data(host, data); |
| } |
| |
| if (qstatus & MMCST0_TOUTRS) { |
| /* Command timeout */ |
| if (host->cmd) { |
| dev_dbg(mmc_dev(host->mmc), |
| "CMD%d timeout, status %x\n", |
| host->cmd->opcode, qstatus); |
| host->cmd->error = -ETIMEDOUT; |
| if (data) { |
| end_transfer = 1; |
| davinci_abort_data(host, data); |
| } else |
| end_command = 1; |
| } |
| } |
| |
| if (qstatus & MMCST0_CRCRS) { |
| /* Command CRC error */ |
| dev_dbg(mmc_dev(host->mmc), "Command CRC error\n"); |
| if (host->cmd) { |
| host->cmd->error = -EILSEQ; |
| end_command = 1; |
| } |
| } |
| |
| if (qstatus & MMCST0_RSPDNE) { |
| /* End of command phase */ |
| end_command = (int) host->cmd; |
| } |
| |
| if (end_command) |
| mmc_davinci_cmd_done(host, host->cmd); |
| if (end_transfer) |
| mmc_davinci_xfer_done(host, data); |
| return IRQ_HANDLED; |
| } |
| |
| static int mmc_davinci_get_cd(struct mmc_host *mmc) |
| { |
| struct platform_device *pdev = to_platform_device(mmc->parent); |
| struct davinci_mmc_config *config = pdev->dev.platform_data; |
| |
| if (!config || !config->get_cd) |
| return -ENOSYS; |
| return config->get_cd(pdev->id); |
| } |
| |
| static int mmc_davinci_get_ro(struct mmc_host *mmc) |
| { |
| struct platform_device *pdev = to_platform_device(mmc->parent); |
| struct davinci_mmc_config *config = pdev->dev.platform_data; |
| |
| if (!config || !config->get_ro) |
| return -ENOSYS; |
| return config->get_ro(pdev->id); |
| } |
| |
| static void mmc_davinci_enable_sdio_irq(struct mmc_host *mmc, int enable) |
| { |
| struct mmc_davinci_host *host = mmc_priv(mmc); |
| |
| if (enable) { |
| if (!(readl(host->base + DAVINCI_SDIOST0) & SDIOST0_DAT1_HI)) { |
| writel(SDIOIST_IOINT, host->base + DAVINCI_SDIOIST); |
| mmc_signal_sdio_irq(host->mmc); |
| } else { |
| host->sdio_int = true; |
| writel(readl(host->base + DAVINCI_SDIOIEN) | |
| SDIOIEN_IOINTEN, host->base + DAVINCI_SDIOIEN); |
| } |
| } else { |
| host->sdio_int = false; |
| writel(readl(host->base + DAVINCI_SDIOIEN) & ~SDIOIEN_IOINTEN, |
| host->base + DAVINCI_SDIOIEN); |
| } |
| } |
| |
| static struct mmc_host_ops mmc_davinci_ops = { |
| .request = mmc_davinci_request, |
| .set_ios = mmc_davinci_set_ios, |
| .get_cd = mmc_davinci_get_cd, |
| .get_ro = mmc_davinci_get_ro, |
| .enable_sdio_irq = mmc_davinci_enable_sdio_irq, |
| }; |
| |
| /*----------------------------------------------------------------------*/ |
| |
| #ifdef CONFIG_CPU_FREQ |
| static int mmc_davinci_cpufreq_transition(struct notifier_block *nb, |
| unsigned long val, void *data) |
| { |
| struct mmc_davinci_host *host; |
| unsigned int mmc_pclk; |
| struct mmc_host *mmc; |
| unsigned long flags; |
| |
| host = container_of(nb, struct mmc_davinci_host, freq_transition); |
| mmc = host->mmc; |
| mmc_pclk = clk_get_rate(host->clk); |
| |
| if (val == CPUFREQ_POSTCHANGE) { |
| spin_lock_irqsave(&mmc->lock, flags); |
| host->mmc_input_clk = mmc_pclk; |
| calculate_clk_divider(mmc, &mmc->ios); |
| spin_unlock_irqrestore(&mmc->lock, flags); |
| } |
| |
| return 0; |
| } |
| |
| static inline int mmc_davinci_cpufreq_register(struct mmc_davinci_host *host) |
| { |
| host->freq_transition.notifier_call = mmc_davinci_cpufreq_transition; |
| |
| return cpufreq_register_notifier(&host->freq_transition, |
| CPUFREQ_TRANSITION_NOTIFIER); |
| } |
| |
| static inline void mmc_davinci_cpufreq_deregister(struct mmc_davinci_host *host) |
| { |
| cpufreq_unregister_notifier(&host->freq_transition, |
| CPUFREQ_TRANSITION_NOTIFIER); |
| } |
| #else |
| static inline int mmc_davinci_cpufreq_register(struct mmc_davinci_host *host) |
| { |
| return 0; |
| } |
| |
| static inline void mmc_davinci_cpufreq_deregister(struct mmc_davinci_host *host) |
| { |
| } |
| #endif |
| static void __init init_mmcsd_host(struct mmc_davinci_host *host) |
| { |
| |
| mmc_davinci_reset_ctrl(host, 1); |
| |
| writel(0, host->base + DAVINCI_MMCCLK); |
| writel(MMCCLK_CLKEN, host->base + DAVINCI_MMCCLK); |
| |
| writel(0x1FFF, host->base + DAVINCI_MMCTOR); |
| writel(0xFFFF, host->base + DAVINCI_MMCTOD); |
| |
| mmc_davinci_reset_ctrl(host, 0); |
| } |
| |
| static int __init davinci_mmcsd_probe(struct platform_device *pdev) |
| { |
| struct davinci_mmc_config *pdata = pdev->dev.platform_data; |
| struct mmc_davinci_host *host = NULL; |
| struct mmc_host *mmc = NULL; |
| struct resource *r, *mem = NULL; |
| int ret = 0, irq = 0; |
| size_t mem_size; |
| |
| /* REVISIT: when we're fully converted, fail if pdata is NULL */ |
| |
| ret = -ENODEV; |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| irq = platform_get_irq(pdev, 0); |
| if (!r || irq == NO_IRQ) |
| goto out; |
| |
| ret = -EBUSY; |
| mem_size = resource_size(r); |
| mem = request_mem_region(r->start, mem_size, pdev->name); |
| if (!mem) |
| goto out; |
| |
| ret = -ENOMEM; |
| mmc = mmc_alloc_host(sizeof(struct mmc_davinci_host), &pdev->dev); |
| if (!mmc) |
| goto out; |
| |
| host = mmc_priv(mmc); |
| host->mmc = mmc; /* Important */ |
| |
| r = platform_get_resource(pdev, IORESOURCE_DMA, 0); |
| if (!r) |
| goto out; |
| host->rxdma = r->start; |
| |
| r = platform_get_resource(pdev, IORESOURCE_DMA, 1); |
| if (!r) |
| goto out; |
| host->txdma = r->start; |
| |
| host->mem_res = mem; |
| host->base = ioremap(mem->start, mem_size); |
| if (!host->base) |
| goto out; |
| |
| ret = -ENXIO; |
| host->clk = clk_get(&pdev->dev, "MMCSDCLK"); |
| if (IS_ERR(host->clk)) { |
| ret = PTR_ERR(host->clk); |
| goto out; |
| } |
| clk_enable(host->clk); |
| host->mmc_input_clk = clk_get_rate(host->clk); |
| |
| init_mmcsd_host(host); |
| |
| if (pdata->nr_sg) |
| host->nr_sg = pdata->nr_sg - 1; |
| |
| if (host->nr_sg > MAX_NR_SG || !host->nr_sg) |
| host->nr_sg = MAX_NR_SG; |
| |
| host->use_dma = use_dma; |
| host->mmc_irq = irq; |
| host->sdio_irq = platform_get_irq(pdev, 1); |
| |
| if (host->use_dma && davinci_acquire_dma_channels(host) != 0) |
| host->use_dma = 0; |
| |
| /* REVISIT: someday, support IRQ-driven card detection. */ |
| mmc->caps |= MMC_CAP_NEEDS_POLL; |
| mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; |
| |
| if (pdata && (pdata->wires == 4 || pdata->wires == 0)) |
| mmc->caps |= MMC_CAP_4_BIT_DATA; |
| |
| if (pdata && (pdata->wires == 8)) |
| mmc->caps |= (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA); |
| |
| host->version = pdata->version; |
| |
| mmc->ops = &mmc_davinci_ops; |
| mmc->f_min = 312500; |
| mmc->f_max = 25000000; |
| if (pdata && pdata->max_freq) |
| mmc->f_max = pdata->max_freq; |
| if (pdata && pdata->caps) |
| mmc->caps |= pdata->caps; |
| mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; |
| |
| /* With no iommu coalescing pages, each phys_seg is a hw_seg. |
| * Each hw_seg uses one EDMA parameter RAM slot, always one |
| * channel and then usually some linked slots. |
| */ |
| mmc->max_segs = 1 + host->n_link; |
| |
| /* EDMA limit per hw segment (one or two MBytes) */ |
| mmc->max_seg_size = MAX_CCNT * rw_threshold; |
| |
| /* MMC/SD controller limits for multiblock requests */ |
| mmc->max_blk_size = 4095; /* BLEN is 12 bits */ |
| mmc->max_blk_count = 65535; /* NBLK is 16 bits */ |
| mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; |
| |
| dev_dbg(mmc_dev(host->mmc), "max_segs=%d\n", mmc->max_segs); |
| dev_dbg(mmc_dev(host->mmc), "max_blk_size=%d\n", mmc->max_blk_size); |
| dev_dbg(mmc_dev(host->mmc), "max_req_size=%d\n", mmc->max_req_size); |
| dev_dbg(mmc_dev(host->mmc), "max_seg_size=%d\n", mmc->max_seg_size); |
| |
| platform_set_drvdata(pdev, host); |
| |
| ret = mmc_davinci_cpufreq_register(host); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to register cpufreq\n"); |
| goto cpu_freq_fail; |
| } |
| |
| ret = mmc_add_host(mmc); |
| if (ret < 0) |
| goto out; |
| |
| ret = request_irq(irq, mmc_davinci_irq, 0, mmc_hostname(mmc), host); |
| if (ret) |
| goto out; |
| |
| if (host->sdio_irq >= 0) { |
| ret = request_irq(host->sdio_irq, mmc_davinci_sdio_irq, 0, |
| mmc_hostname(mmc), host); |
| if (!ret) |
| mmc->caps |= MMC_CAP_SDIO_IRQ; |
| } |
| |
| rename_region(mem, mmc_hostname(mmc)); |
| |
| dev_info(mmc_dev(host->mmc), "Using %s, %d-bit mode\n", |
| host->use_dma ? "DMA" : "PIO", |
| (mmc->caps & MMC_CAP_4_BIT_DATA) ? 4 : 1); |
| |
| return 0; |
| |
| out: |
| mmc_davinci_cpufreq_deregister(host); |
| cpu_freq_fail: |
| if (host) { |
| davinci_release_dma_channels(host); |
| |
| if (host->clk) { |
| clk_disable(host->clk); |
| clk_put(host->clk); |
| } |
| |
| if (host->base) |
| iounmap(host->base); |
| } |
| |
| if (mmc) |
| mmc_free_host(mmc); |
| |
| if (mem) |
| release_resource(mem); |
| |
| dev_dbg(&pdev->dev, "probe err %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int __exit davinci_mmcsd_remove(struct platform_device *pdev) |
| { |
| struct mmc_davinci_host *host = platform_get_drvdata(pdev); |
| |
| platform_set_drvdata(pdev, NULL); |
| if (host) { |
| mmc_davinci_cpufreq_deregister(host); |
| |
| mmc_remove_host(host->mmc); |
| free_irq(host->mmc_irq, host); |
| if (host->mmc->caps & MMC_CAP_SDIO_IRQ) |
| free_irq(host->sdio_irq, host); |
| |
| davinci_release_dma_channels(host); |
| |
| clk_disable(host->clk); |
| clk_put(host->clk); |
| |
| iounmap(host->base); |
| |
| release_resource(host->mem_res); |
| |
| mmc_free_host(host->mmc); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int davinci_mmcsd_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct mmc_davinci_host *host = platform_get_drvdata(pdev); |
| int ret; |
| |
| mmc_host_enable(host->mmc); |
| ret = mmc_suspend_host(host->mmc); |
| if (!ret) { |
| writel(0, host->base + DAVINCI_MMCIM); |
| mmc_davinci_reset_ctrl(host, 1); |
| mmc_host_disable(host->mmc); |
| clk_disable(host->clk); |
| host->suspended = 1; |
| } else { |
| host->suspended = 0; |
| mmc_host_disable(host->mmc); |
| } |
| |
| return ret; |
| } |
| |
| static int davinci_mmcsd_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct mmc_davinci_host *host = platform_get_drvdata(pdev); |
| int ret; |
| |
| if (!host->suspended) |
| return 0; |
| |
| clk_enable(host->clk); |
| mmc_host_enable(host->mmc); |
| |
| mmc_davinci_reset_ctrl(host, 0); |
| ret = mmc_resume_host(host->mmc); |
| if (!ret) |
| host->suspended = 0; |
| |
| return ret; |
| } |
| |
| static const struct dev_pm_ops davinci_mmcsd_pm = { |
| .suspend = davinci_mmcsd_suspend, |
| .resume = davinci_mmcsd_resume, |
| }; |
| |
| #define davinci_mmcsd_pm_ops (&davinci_mmcsd_pm) |
| #else |
| #define davinci_mmcsd_pm_ops NULL |
| #endif |
| |
| static struct platform_driver davinci_mmcsd_driver = { |
| .driver = { |
| .name = "davinci_mmc", |
| .owner = THIS_MODULE, |
| .pm = davinci_mmcsd_pm_ops, |
| }, |
| .remove = __exit_p(davinci_mmcsd_remove), |
| }; |
| |
| static int __init davinci_mmcsd_init(void) |
| { |
| return platform_driver_probe(&davinci_mmcsd_driver, |
| davinci_mmcsd_probe); |
| } |
| module_init(davinci_mmcsd_init); |
| |
| static void __exit davinci_mmcsd_exit(void) |
| { |
| platform_driver_unregister(&davinci_mmcsd_driver); |
| } |
| module_exit(davinci_mmcsd_exit); |
| |
| MODULE_AUTHOR("Texas Instruments India"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("MMC/SD driver for Davinci MMC controller"); |
| |