| /* |
| * P2020 DS Device Tree Source |
| * |
| * Copyright 2009-2011 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /include/ "p2020si.dtsi" |
| |
| / { |
| model = "fsl,P2020DS"; |
| compatible = "fsl,P2020DS"; |
| |
| aliases { |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| ethernet2 = &enet2; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci0 = &pci0; |
| pci1 = &pci1; |
| pci2 = &pci2; |
| }; |
| |
| |
| memory { |
| device_type = "memory"; |
| }; |
| |
| localbus@ffe05000 { |
| compatible = "fsl,elbc", "simple-bus"; |
| ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 |
| 0x1 0x0 0x0 0xe0000000 0x08000000 |
| 0x2 0x0 0x0 0xffa00000 0x00040000 |
| 0x3 0x0 0x0 0xffdf0000 0x00008000 |
| 0x4 0x0 0x0 0xffa40000 0x00040000 |
| 0x5 0x0 0x0 0xffa80000 0x00040000 |
| 0x6 0x0 0x0 0xffac0000 0x00040000>; |
| |
| nor@0,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "cfi-flash"; |
| reg = <0x0 0x0 0x8000000>; |
| bank-width = <2>; |
| device-width = <1>; |
| |
| ramdisk@0 { |
| reg = <0x0 0x03000000>; |
| read-only; |
| }; |
| |
| diagnostic@3000000 { |
| reg = <0x03000000 0x00e00000>; |
| read-only; |
| }; |
| |
| dink@3e00000 { |
| reg = <0x03e00000 0x00200000>; |
| read-only; |
| }; |
| |
| kernel@4000000 { |
| reg = <0x04000000 0x00400000>; |
| read-only; |
| }; |
| |
| jffs2@4400000 { |
| reg = <0x04400000 0x03b00000>; |
| }; |
| |
| dtb@7f00000 { |
| reg = <0x07f00000 0x00080000>; |
| read-only; |
| }; |
| |
| u-boot@7f80000 { |
| reg = <0x07f80000 0x00080000>; |
| read-only; |
| }; |
| }; |
| |
| nand@2,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,elbc-fcm-nand"; |
| reg = <0x2 0x0 0x40000>; |
| |
| u-boot@0 { |
| reg = <0x0 0x02000000>; |
| read-only; |
| }; |
| |
| jffs2@2000000 { |
| reg = <0x02000000 0x10000000>; |
| }; |
| |
| ramdisk@12000000 { |
| reg = <0x12000000 0x08000000>; |
| read-only; |
| }; |
| |
| kernel@1a000000 { |
| reg = <0x1a000000 0x04000000>; |
| }; |
| |
| dtb@1e000000 { |
| reg = <0x1e000000 0x01000000>; |
| read-only; |
| }; |
| |
| empty@1f000000 { |
| reg = <0x1f000000 0x21000000>; |
| }; |
| }; |
| |
| board-control@3,0 { |
| compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis"; |
| reg = <0x3 0x0 0x30>; |
| }; |
| |
| nand@4,0 { |
| compatible = "fsl,elbc-fcm-nand"; |
| reg = <0x4 0x0 0x40000>; |
| }; |
| |
| nand@5,0 { |
| compatible = "fsl,elbc-fcm-nand"; |
| reg = <0x5 0x0 0x40000>; |
| }; |
| |
| nand@6,0 { |
| compatible = "fsl,elbc-fcm-nand"; |
| reg = <0x6 0x0 0x40000>; |
| }; |
| }; |
| |
| soc@ffe00000 { |
| |
| usb@22000 { |
| phy_type = "ulpi"; |
| }; |
| |
| mdio@24520 { |
| phy0: ethernet-phy@0 { |
| interrupt-parent = <&mpic>; |
| interrupts = <3 1>; |
| reg = <0x0>; |
| }; |
| phy1: ethernet-phy@1 { |
| interrupt-parent = <&mpic>; |
| interrupts = <3 1>; |
| reg = <0x1>; |
| }; |
| phy2: ethernet-phy@2 { |
| interrupt-parent = <&mpic>; |
| interrupts = <3 1>; |
| reg = <0x2>; |
| }; |
| tbi0: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| |
| }; |
| |
| mdio@25520 { |
| tbi1: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| |
| mdio@26520 { |
| tbi2: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| |
| }; |
| |
| ptp_clock@24E00 { |
| compatible = "fsl,etsec-ptp"; |
| reg = <0x24E00 0xB0>; |
| interrupts = <68 2 69 2 70 2>; |
| interrupt-parent = < &mpic >; |
| fsl,tclk-period = <5>; |
| fsl,tmr-prsc = <200>; |
| fsl,tmr-add = <0xCCCCCCCD>; |
| fsl,tmr-fiper1 = <0x3B9AC9FB>; |
| fsl,tmr-fiper2 = <0x0001869B>; |
| fsl,max-adj = <249999999>; |
| }; |
| |
| enet0: ethernet@24000 { |
| tbi-handle = <&tbi0>; |
| phy-handle = <&phy0>; |
| phy-connection-type = "rgmii-id"; |
| }; |
| |
| enet1: ethernet@25000 { |
| tbi-handle = <&tbi1>; |
| phy-handle = <&phy1>; |
| phy-connection-type = "rgmii-id"; |
| |
| }; |
| |
| enet2: ethernet@26000 { |
| tbi-handle = <&tbi2>; |
| phy-handle = <&phy2>; |
| phy-connection-type = "rgmii-id"; |
| }; |
| |
| |
| msi@41600 { |
| compatible = "fsl,mpic-msi"; |
| }; |
| }; |
| |
| pci0: pcie@ffe08000 { |
| ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0x0 0x0 0x1 &mpic 0x8 0x1 |
| 0000 0x0 0x0 0x2 &mpic 0x9 0x1 |
| 0000 0x0 0x0 0x3 &mpic 0xa 0x1 |
| 0000 0x0 0x0 0x4 &mpic 0xb 0x1 |
| >; |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0x80000000 |
| 0x2000000 0x0 0x80000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x10000>; |
| }; |
| }; |
| |
| pci1: pcie@ffe09000 { |
| ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; |
| interrupt-map-mask = <0xff00 0x0 0x0 0x7>; |
| interrupt-map = < |
| |
| // IDSEL 0x11 func 0 - PCI slot 1 |
| 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x11 func 1 - PCI slot 1 |
| 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x11 func 2 - PCI slot 1 |
| 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x11 func 3 - PCI slot 1 |
| 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x11 func 4 - PCI slot 1 |
| 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x11 func 5 - PCI slot 1 |
| 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x11 func 6 - PCI slot 1 |
| 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x11 func 7 - PCI slot 1 |
| 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x1d Audio |
| 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 |
| |
| // IDSEL 0x1e Legacy |
| 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 |
| 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 |
| |
| // IDSEL 0x1f IDE/SATA |
| 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 |
| 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 |
| >; |
| |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0xa0000000 |
| 0x2000000 0x0 0xa0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x10000>; |
| uli1575@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| ranges = <0x2000000 0x0 0xa0000000 |
| 0x2000000 0x0 0xa0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x10000>; |
| isa@1e { |
| device_type = "isa"; |
| #interrupt-cells = <2>; |
| #size-cells = <1>; |
| #address-cells = <2>; |
| reg = <0xf000 0x0 0x0 0x0 0x0>; |
| ranges = <0x1 0x0 0x1000000 0x0 0x0 |
| 0x1000>; |
| interrupt-parent = <&i8259>; |
| |
| i8259: interrupt-controller@20 { |
| reg = <0x1 0x20 0x2 |
| 0x1 0xa0 0x2 |
| 0x1 0x4d0 0x2>; |
| interrupt-controller; |
| device_type = "interrupt-controller"; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| compatible = "chrp,iic"; |
| interrupts = <4 1>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| i8042@60 { |
| #size-cells = <0>; |
| #address-cells = <1>; |
| reg = <0x1 0x60 0x1 0x1 0x64 0x1>; |
| interrupts = <1 3 12 3>; |
| interrupt-parent = |
| <&i8259>; |
| |
| keyboard@0 { |
| reg = <0x0>; |
| compatible = "pnpPNP,303"; |
| }; |
| |
| mouse@1 { |
| reg = <0x1>; |
| compatible = "pnpPNP,f03"; |
| }; |
| }; |
| |
| rtc@70 { |
| compatible = "pnpPNP,b00"; |
| reg = <0x1 0x70 0x2>; |
| }; |
| |
| gpio@400 { |
| reg = <0x1 0x400 0x80>; |
| }; |
| }; |
| }; |
| }; |
| |
| }; |
| |
| pci2: pcie@ffe0a000 { |
| ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 0000 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 0000 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 0000 0x0 0x0 0x4 &mpic 0x3 0x1 |
| >; |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0xc0000000 |
| 0x2000000 0x0 0xc0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x10000>; |
| }; |
| }; |
| }; |
