| /* |
| * Network device driver for the MACE ethernet controller on |
| * Apple Powermacs. Assumes it's under a DBDMA controller. |
| * |
| * Copyright (C) 1996 Paul Mackerras. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/delay.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/crc32.h> |
| #include <linux/spinlock.h> |
| #include <linux/bitrev.h> |
| #include <linux/slab.h> |
| #include <asm/prom.h> |
| #include <asm/dbdma.h> |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/macio.h> |
| |
| #include "mace.h" |
| |
| static int port_aaui = -1; |
| |
| #define N_RX_RING 8 |
| #define N_TX_RING 6 |
| #define MAX_TX_ACTIVE 1 |
| #define NCMDS_TX 1 /* dma commands per element in tx ring */ |
| #define RX_BUFLEN (ETH_FRAME_LEN + 8) |
| #define TX_TIMEOUT HZ /* 1 second */ |
| |
| /* Chip rev needs workaround on HW & multicast addr change */ |
| #define BROKEN_ADDRCHG_REV 0x0941 |
| |
| /* Bits in transmit DMA status */ |
| #define TX_DMA_ERR 0x80 |
| |
| struct mace_data { |
| volatile struct mace __iomem *mace; |
| volatile struct dbdma_regs __iomem *tx_dma; |
| int tx_dma_intr; |
| volatile struct dbdma_regs __iomem *rx_dma; |
| int rx_dma_intr; |
| volatile struct dbdma_cmd *tx_cmds; /* xmit dma command list */ |
| volatile struct dbdma_cmd *rx_cmds; /* recv dma command list */ |
| struct sk_buff *rx_bufs[N_RX_RING]; |
| int rx_fill; |
| int rx_empty; |
| struct sk_buff *tx_bufs[N_TX_RING]; |
| int tx_fill; |
| int tx_empty; |
| unsigned char maccc; |
| unsigned char tx_fullup; |
| unsigned char tx_active; |
| unsigned char tx_bad_runt; |
| struct timer_list tx_timeout; |
| int timeout_active; |
| int port_aaui; |
| int chipid; |
| struct macio_dev *mdev; |
| spinlock_t lock; |
| }; |
| |
| /* |
| * Number of bytes of private data per MACE: allow enough for |
| * the rx and tx dma commands plus a branch dma command each, |
| * and another 16 bytes to allow us to align the dma command |
| * buffers on a 16 byte boundary. |
| */ |
| #define PRIV_BYTES (sizeof(struct mace_data) \ |
| + (N_RX_RING + NCMDS_TX * N_TX_RING + 3) * sizeof(struct dbdma_cmd)) |
| |
| static int mace_open(struct net_device *dev); |
| static int mace_close(struct net_device *dev); |
| static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev); |
| static void mace_set_multicast(struct net_device *dev); |
| static void mace_reset(struct net_device *dev); |
| static int mace_set_address(struct net_device *dev, void *addr); |
| static irqreturn_t mace_interrupt(int irq, void *dev_id); |
| static irqreturn_t mace_txdma_intr(int irq, void *dev_id); |
| static irqreturn_t mace_rxdma_intr(int irq, void *dev_id); |
| static void mace_set_timeout(struct net_device *dev); |
| static void mace_tx_timeout(unsigned long data); |
| static inline void dbdma_reset(volatile struct dbdma_regs __iomem *dma); |
| static inline void mace_clean_rings(struct mace_data *mp); |
| static void __mace_set_address(struct net_device *dev, void *addr); |
| |
| /* |
| * If we can't get a skbuff when we need it, we use this area for DMA. |
| */ |
| static unsigned char *dummy_buf; |
| |
| static const struct net_device_ops mace_netdev_ops = { |
| .ndo_open = mace_open, |
| .ndo_stop = mace_close, |
| .ndo_start_xmit = mace_xmit_start, |
| .ndo_set_rx_mode = mace_set_multicast, |
| .ndo_set_mac_address = mace_set_address, |
| .ndo_change_mtu = eth_change_mtu, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_id *match) |
| { |
| struct device_node *mace = macio_get_of_node(mdev); |
| struct net_device *dev; |
| struct mace_data *mp; |
| const unsigned char *addr; |
| int j, rev, rc = -EBUSY; |
| |
| if (macio_resource_count(mdev) != 3 || macio_irq_count(mdev) != 3) { |
| printk(KERN_ERR "can't use MACE %s: need 3 addrs and 3 irqs\n", |
| mace->full_name); |
| return -ENODEV; |
| } |
| |
| addr = of_get_property(mace, "mac-address", NULL); |
| if (addr == NULL) { |
| addr = of_get_property(mace, "local-mac-address", NULL); |
| if (addr == NULL) { |
| printk(KERN_ERR "Can't get mac-address for MACE %s\n", |
| mace->full_name); |
| return -ENODEV; |
| } |
| } |
| |
| /* |
| * lazy allocate the driver-wide dummy buffer. (Note that we |
| * never have more than one MACE in the system anyway) |
| */ |
| if (dummy_buf == NULL) { |
| dummy_buf = kmalloc(RX_BUFLEN+2, GFP_KERNEL); |
| if (dummy_buf == NULL) { |
| printk(KERN_ERR "MACE: couldn't allocate dummy buffer\n"); |
| return -ENOMEM; |
| } |
| } |
| |
| if (macio_request_resources(mdev, "mace")) { |
| printk(KERN_ERR "MACE: can't request IO resources !\n"); |
| return -EBUSY; |
| } |
| |
| dev = alloc_etherdev(PRIV_BYTES); |
| if (!dev) { |
| printk(KERN_ERR "MACE: can't allocate ethernet device !\n"); |
| rc = -ENOMEM; |
| goto err_release; |
| } |
| SET_NETDEV_DEV(dev, &mdev->ofdev.dev); |
| |
| mp = netdev_priv(dev); |
| mp->mdev = mdev; |
| macio_set_drvdata(mdev, dev); |
| |
| dev->base_addr = macio_resource_start(mdev, 0); |
| mp->mace = ioremap(dev->base_addr, 0x1000); |
| if (mp->mace == NULL) { |
| printk(KERN_ERR "MACE: can't map IO resources !\n"); |
| rc = -ENOMEM; |
| goto err_free; |
| } |
| dev->irq = macio_irq(mdev, 0); |
| |
| rev = addr[0] == 0 && addr[1] == 0xA0; |
| for (j = 0; j < 6; ++j) { |
| dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j]; |
| } |
| mp->chipid = (in_8(&mp->mace->chipid_hi) << 8) | |
| in_8(&mp->mace->chipid_lo); |
| |
| |
| mp = netdev_priv(dev); |
| mp->maccc = ENXMT | ENRCV; |
| |
| mp->tx_dma = ioremap(macio_resource_start(mdev, 1), 0x1000); |
| if (mp->tx_dma == NULL) { |
| printk(KERN_ERR "MACE: can't map TX DMA resources !\n"); |
| rc = -ENOMEM; |
| goto err_unmap_io; |
| } |
| mp->tx_dma_intr = macio_irq(mdev, 1); |
| |
| mp->rx_dma = ioremap(macio_resource_start(mdev, 2), 0x1000); |
| if (mp->rx_dma == NULL) { |
| printk(KERN_ERR "MACE: can't map RX DMA resources !\n"); |
| rc = -ENOMEM; |
| goto err_unmap_tx_dma; |
| } |
| mp->rx_dma_intr = macio_irq(mdev, 2); |
| |
| mp->tx_cmds = (volatile struct dbdma_cmd *) DBDMA_ALIGN(mp + 1); |
| mp->rx_cmds = mp->tx_cmds + NCMDS_TX * N_TX_RING + 1; |
| |
| memset((char *) mp->tx_cmds, 0, |
| (NCMDS_TX*N_TX_RING + N_RX_RING + 2) * sizeof(struct dbdma_cmd)); |
| init_timer(&mp->tx_timeout); |
| spin_lock_init(&mp->lock); |
| mp->timeout_active = 0; |
| |
| if (port_aaui >= 0) |
| mp->port_aaui = port_aaui; |
| else { |
| /* Apple Network Server uses the AAUI port */ |
| if (of_machine_is_compatible("AAPL,ShinerESB")) |
| mp->port_aaui = 1; |
| else { |
| #ifdef CONFIG_MACE_AAUI_PORT |
| mp->port_aaui = 1; |
| #else |
| mp->port_aaui = 0; |
| #endif |
| } |
| } |
| |
| dev->netdev_ops = &mace_netdev_ops; |
| |
| /* |
| * Most of what is below could be moved to mace_open() |
| */ |
| mace_reset(dev); |
| |
| rc = request_irq(dev->irq, mace_interrupt, 0, "MACE", dev); |
| if (rc) { |
| printk(KERN_ERR "MACE: can't get irq %d\n", dev->irq); |
| goto err_unmap_rx_dma; |
| } |
| rc = request_irq(mp->tx_dma_intr, mace_txdma_intr, 0, "MACE-txdma", dev); |
| if (rc) { |
| printk(KERN_ERR "MACE: can't get irq %d\n", mp->tx_dma_intr); |
| goto err_free_irq; |
| } |
| rc = request_irq(mp->rx_dma_intr, mace_rxdma_intr, 0, "MACE-rxdma", dev); |
| if (rc) { |
| printk(KERN_ERR "MACE: can't get irq %d\n", mp->rx_dma_intr); |
| goto err_free_tx_irq; |
| } |
| |
| rc = register_netdev(dev); |
| if (rc) { |
| printk(KERN_ERR "MACE: Cannot register net device, aborting.\n"); |
| goto err_free_rx_irq; |
| } |
| |
| printk(KERN_INFO "%s: MACE at %pM, chip revision %d.%d\n", |
| dev->name, dev->dev_addr, |
| mp->chipid >> 8, mp->chipid & 0xff); |
| |
| return 0; |
| |
| err_free_rx_irq: |
| free_irq(macio_irq(mdev, 2), dev); |
| err_free_tx_irq: |
| free_irq(macio_irq(mdev, 1), dev); |
| err_free_irq: |
| free_irq(macio_irq(mdev, 0), dev); |
| err_unmap_rx_dma: |
| iounmap(mp->rx_dma); |
| err_unmap_tx_dma: |
| iounmap(mp->tx_dma); |
| err_unmap_io: |
| iounmap(mp->mace); |
| err_free: |
| free_netdev(dev); |
| err_release: |
| macio_release_resources(mdev); |
| |
| return rc; |
| } |
| |
| static int __devexit mace_remove(struct macio_dev *mdev) |
| { |
| struct net_device *dev = macio_get_drvdata(mdev); |
| struct mace_data *mp; |
| |
| BUG_ON(dev == NULL); |
| |
| macio_set_drvdata(mdev, NULL); |
| |
| mp = netdev_priv(dev); |
| |
| unregister_netdev(dev); |
| |
| free_irq(dev->irq, dev); |
| free_irq(mp->tx_dma_intr, dev); |
| free_irq(mp->rx_dma_intr, dev); |
| |
| iounmap(mp->rx_dma); |
| iounmap(mp->tx_dma); |
| iounmap(mp->mace); |
| |
| free_netdev(dev); |
| |
| macio_release_resources(mdev); |
| |
| return 0; |
| } |
| |
| static void dbdma_reset(volatile struct dbdma_regs __iomem *dma) |
| { |
| int i; |
| |
| out_le32(&dma->control, (WAKE|FLUSH|PAUSE|RUN) << 16); |
| |
| /* |
| * Yes this looks peculiar, but apparently it needs to be this |
| * way on some machines. |
| */ |
| for (i = 200; i > 0; --i) |
| if (ld_le32(&dma->control) & RUN) |
| udelay(1); |
| } |
| |
| static void mace_reset(struct net_device *dev) |
| { |
| struct mace_data *mp = netdev_priv(dev); |
| volatile struct mace __iomem *mb = mp->mace; |
| int i; |
| |
| /* soft-reset the chip */ |
| i = 200; |
| while (--i) { |
| out_8(&mb->biucc, SWRST); |
| if (in_8(&mb->biucc) & SWRST) { |
| udelay(10); |
| continue; |
| } |
| break; |
| } |
| if (!i) { |
| printk(KERN_ERR "mace: cannot reset chip!\n"); |
| return; |
| } |
| |
| out_8(&mb->imr, 0xff); /* disable all intrs for now */ |
| i = in_8(&mb->ir); |
| out_8(&mb->maccc, 0); /* turn off tx, rx */ |
| |
| out_8(&mb->biucc, XMTSP_64); |
| out_8(&mb->utr, RTRD); |
| out_8(&mb->fifocc, RCVFW_32 | XMTFW_16 | XMTFWU | RCVFWU | XMTBRST); |
| out_8(&mb->xmtfc, AUTO_PAD_XMIT); /* auto-pad short frames */ |
| out_8(&mb->rcvfc, 0); |
| |
| /* load up the hardware address */ |
| __mace_set_address(dev, dev->dev_addr); |
| |
| /* clear the multicast filter */ |
| if (mp->chipid == BROKEN_ADDRCHG_REV) |
| out_8(&mb->iac, LOGADDR); |
| else { |
| out_8(&mb->iac, ADDRCHG | LOGADDR); |
| while ((in_8(&mb->iac) & ADDRCHG) != 0) |
| ; |
| } |
| for (i = 0; i < 8; ++i) |
| out_8(&mb->ladrf, 0); |
| |
| /* done changing address */ |
| if (mp->chipid != BROKEN_ADDRCHG_REV) |
| out_8(&mb->iac, 0); |
| |
| if (mp->port_aaui) |
| out_8(&mb->plscc, PORTSEL_AUI + ENPLSIO); |
| else |
| out_8(&mb->plscc, PORTSEL_GPSI + ENPLSIO); |
| } |
| |
| static void __mace_set_address(struct net_device *dev, void *addr) |
| { |
| struct mace_data *mp = netdev_priv(dev); |
| volatile struct mace __iomem *mb = mp->mace; |
| unsigned char *p = addr; |
| int i; |
| |
| /* load up the hardware address */ |
| if (mp->chipid == BROKEN_ADDRCHG_REV) |
| out_8(&mb->iac, PHYADDR); |
| else { |
| out_8(&mb->iac, ADDRCHG | PHYADDR); |
| while ((in_8(&mb->iac) & ADDRCHG) != 0) |
| ; |
| } |
| for (i = 0; i < 6; ++i) |
| out_8(&mb->padr, dev->dev_addr[i] = p[i]); |
| if (mp->chipid != BROKEN_ADDRCHG_REV) |
| out_8(&mb->iac, 0); |
| } |
| |
| static int mace_set_address(struct net_device *dev, void *addr) |
| { |
| struct mace_data *mp = netdev_priv(dev); |
| volatile struct mace __iomem *mb = mp->mace; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&mp->lock, flags); |
| |
| __mace_set_address(dev, addr); |
| |
| /* note: setting ADDRCHG clears ENRCV */ |
| out_8(&mb->maccc, mp->maccc); |
| |
| spin_unlock_irqrestore(&mp->lock, flags); |
| return 0; |
| } |
| |
| static inline void mace_clean_rings(struct mace_data *mp) |
| { |
| int i; |
| |
| /* free some skb's */ |
| for (i = 0; i < N_RX_RING; ++i) { |
| if (mp->rx_bufs[i] != NULL) { |
| dev_kfree_skb(mp->rx_bufs[i]); |
| mp->rx_bufs[i] = NULL; |
| } |
| } |
| for (i = mp->tx_empty; i != mp->tx_fill; ) { |
| dev_kfree_skb(mp->tx_bufs[i]); |
| if (++i >= N_TX_RING) |
| i = 0; |
| } |
| } |
| |
| static int mace_open(struct net_device *dev) |
| { |
| struct mace_data *mp = netdev_priv(dev); |
| volatile struct mace __iomem *mb = mp->mace; |
| volatile struct dbdma_regs __iomem *rd = mp->rx_dma; |
| volatile struct dbdma_regs __iomem *td = mp->tx_dma; |
| volatile struct dbdma_cmd *cp; |
| int i; |
| struct sk_buff *skb; |
| unsigned char *data; |
| |
| /* reset the chip */ |
| mace_reset(dev); |
| |
| /* initialize list of sk_buffs for receiving and set up recv dma */ |
| mace_clean_rings(mp); |
| memset((char *)mp->rx_cmds, 0, N_RX_RING * sizeof(struct dbdma_cmd)); |
| cp = mp->rx_cmds; |
| for (i = 0; i < N_RX_RING - 1; ++i) { |
| skb = dev_alloc_skb(RX_BUFLEN + 2); |
| if (!skb) { |
| data = dummy_buf; |
| } else { |
| skb_reserve(skb, 2); /* so IP header lands on 4-byte bdry */ |
| data = skb->data; |
| } |
| mp->rx_bufs[i] = skb; |
| st_le16(&cp->req_count, RX_BUFLEN); |
| st_le16(&cp->command, INPUT_LAST + INTR_ALWAYS); |
| st_le32(&cp->phy_addr, virt_to_bus(data)); |
| cp->xfer_status = 0; |
| ++cp; |
| } |
| mp->rx_bufs[i] = NULL; |
| st_le16(&cp->command, DBDMA_STOP); |
| mp->rx_fill = i; |
| mp->rx_empty = 0; |
| |
| /* Put a branch back to the beginning of the receive command list */ |
| ++cp; |
| st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS); |
| st_le32(&cp->cmd_dep, virt_to_bus(mp->rx_cmds)); |
| |
| /* start rx dma */ |
| out_le32(&rd->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */ |
| out_le32(&rd->cmdptr, virt_to_bus(mp->rx_cmds)); |
| out_le32(&rd->control, (RUN << 16) | RUN); |
| |
| /* put a branch at the end of the tx command list */ |
| cp = mp->tx_cmds + NCMDS_TX * N_TX_RING; |
| st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS); |
| st_le32(&cp->cmd_dep, virt_to_bus(mp->tx_cmds)); |
| |
| /* reset tx dma */ |
| out_le32(&td->control, (RUN|PAUSE|FLUSH|WAKE) << 16); |
| out_le32(&td->cmdptr, virt_to_bus(mp->tx_cmds)); |
| mp->tx_fill = 0; |
| mp->tx_empty = 0; |
| mp->tx_fullup = 0; |
| mp->tx_active = 0; |
| mp->tx_bad_runt = 0; |
| |
| /* turn it on! */ |
| out_8(&mb->maccc, mp->maccc); |
| /* enable all interrupts except receive interrupts */ |
| out_8(&mb->imr, RCVINT); |
| |
| return 0; |
| } |
| |
| static int mace_close(struct net_device *dev) |
| { |
| struct mace_data *mp = netdev_priv(dev); |
| volatile struct mace __iomem *mb = mp->mace; |
| volatile struct dbdma_regs __iomem *rd = mp->rx_dma; |
| volatile struct dbdma_regs __iomem *td = mp->tx_dma; |
| |
| /* disable rx and tx */ |
| out_8(&mb->maccc, 0); |
| out_8(&mb->imr, 0xff); /* disable all intrs */ |
| |
| /* disable rx and tx dma */ |
| st_le32(&rd->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */ |
| st_le32(&td->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */ |
| |
| mace_clean_rings(mp); |
| |
| return 0; |
| } |
| |
| static inline void mace_set_timeout(struct net_device *dev) |
| { |
| struct mace_data *mp = netdev_priv(dev); |
| |
| if (mp->timeout_active) |
| del_timer(&mp->tx_timeout); |
| mp->tx_timeout.expires = jiffies + TX_TIMEOUT; |
| mp->tx_timeout.function = mace_tx_timeout; |
| mp->tx_timeout.data = (unsigned long) dev; |
| add_timer(&mp->tx_timeout); |
| mp->timeout_active = 1; |
| } |
| |
| static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct mace_data *mp = netdev_priv(dev); |
| volatile struct dbdma_regs __iomem *td = mp->tx_dma; |
| volatile struct dbdma_cmd *cp, *np; |
| unsigned long flags; |
| int fill, next, len; |
| |
| /* see if there's a free slot in the tx ring */ |
| spin_lock_irqsave(&mp->lock, flags); |
| fill = mp->tx_fill; |
| next = fill + 1; |
| if (next >= N_TX_RING) |
| next = 0; |
| if (next == mp->tx_empty) { |
| netif_stop_queue(dev); |
| mp->tx_fullup = 1; |
| spin_unlock_irqrestore(&mp->lock, flags); |
| return NETDEV_TX_BUSY; /* can't take it at the moment */ |
| } |
| spin_unlock_irqrestore(&mp->lock, flags); |
| |
| /* partially fill in the dma command block */ |
| len = skb->len; |
| if (len > ETH_FRAME_LEN) { |
| printk(KERN_DEBUG "mace: xmit frame too long (%d)\n", len); |
| len = ETH_FRAME_LEN; |
| } |
| mp->tx_bufs[fill] = skb; |
| cp = mp->tx_cmds + NCMDS_TX * fill; |
| st_le16(&cp->req_count, len); |
| st_le32(&cp->phy_addr, virt_to_bus(skb->data)); |
| |
| np = mp->tx_cmds + NCMDS_TX * next; |
| out_le16(&np->command, DBDMA_STOP); |
| |
| /* poke the tx dma channel */ |
| spin_lock_irqsave(&mp->lock, flags); |
| mp->tx_fill = next; |
| if (!mp->tx_bad_runt && mp->tx_active < MAX_TX_ACTIVE) { |
| out_le16(&cp->xfer_status, 0); |
| out_le16(&cp->command, OUTPUT_LAST); |
| out_le32(&td->control, ((RUN|WAKE) << 16) + (RUN|WAKE)); |
| ++mp->tx_active; |
| mace_set_timeout(dev); |
| } |
| if (++next >= N_TX_RING) |
| next = 0; |
| if (next == mp->tx_empty) |
| netif_stop_queue(dev); |
| spin_unlock_irqrestore(&mp->lock, flags); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static void mace_set_multicast(struct net_device *dev) |
| { |
| struct mace_data *mp = netdev_priv(dev); |
| volatile struct mace __iomem *mb = mp->mace; |
| int i; |
| u32 crc; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&mp->lock, flags); |
| mp->maccc &= ~PROM; |
| if (dev->flags & IFF_PROMISC) { |
| mp->maccc |= PROM; |
| } else { |
| unsigned char multicast_filter[8]; |
| struct netdev_hw_addr *ha; |
| |
| if (dev->flags & IFF_ALLMULTI) { |
| for (i = 0; i < 8; i++) |
| multicast_filter[i] = 0xff; |
| } else { |
| for (i = 0; i < 8; i++) |
| multicast_filter[i] = 0; |
| netdev_for_each_mc_addr(ha, dev) { |
| crc = ether_crc_le(6, ha->addr); |
| i = crc >> 26; /* bit number in multicast_filter */ |
| multicast_filter[i >> 3] |= 1 << (i & 7); |
| } |
| } |
| #if 0 |
| printk("Multicast filter :"); |
| for (i = 0; i < 8; i++) |
| printk("%02x ", multicast_filter[i]); |
| printk("\n"); |
| #endif |
| |
| if (mp->chipid == BROKEN_ADDRCHG_REV) |
| out_8(&mb->iac, LOGADDR); |
| else { |
| out_8(&mb->iac, ADDRCHG | LOGADDR); |
| while ((in_8(&mb->iac) & ADDRCHG) != 0) |
| ; |
| } |
| for (i = 0; i < 8; ++i) |
| out_8(&mb->ladrf, multicast_filter[i]); |
| if (mp->chipid != BROKEN_ADDRCHG_REV) |
| out_8(&mb->iac, 0); |
| } |
| /* reset maccc */ |
| out_8(&mb->maccc, mp->maccc); |
| spin_unlock_irqrestore(&mp->lock, flags); |
| } |
| |
| static void mace_handle_misc_intrs(struct mace_data *mp, int intr, struct net_device *dev) |
| { |
| volatile struct mace __iomem *mb = mp->mace; |
| static int mace_babbles, mace_jabbers; |
| |
| if (intr & MPCO) |
| dev->stats.rx_missed_errors += 256; |
| dev->stats.rx_missed_errors += in_8(&mb->mpc); /* reading clears it */ |
| if (intr & RNTPCO) |
| dev->stats.rx_length_errors += 256; |
| dev->stats.rx_length_errors += in_8(&mb->rntpc); /* reading clears it */ |
| if (intr & CERR) |
| ++dev->stats.tx_heartbeat_errors; |
| if (intr & BABBLE) |
| if (mace_babbles++ < 4) |
| printk(KERN_DEBUG "mace: babbling transmitter\n"); |
| if (intr & JABBER) |
| if (mace_jabbers++ < 4) |
| printk(KERN_DEBUG "mace: jabbering transceiver\n"); |
| } |
| |
| static irqreturn_t mace_interrupt(int irq, void *dev_id) |
| { |
| struct net_device *dev = (struct net_device *) dev_id; |
| struct mace_data *mp = netdev_priv(dev); |
| volatile struct mace __iomem *mb = mp->mace; |
| volatile struct dbdma_regs __iomem *td = mp->tx_dma; |
| volatile struct dbdma_cmd *cp; |
| int intr, fs, i, stat, x; |
| int xcount, dstat; |
| unsigned long flags; |
| /* static int mace_last_fs, mace_last_xcount; */ |
| |
| spin_lock_irqsave(&mp->lock, flags); |
| intr = in_8(&mb->ir); /* read interrupt register */ |
| in_8(&mb->xmtrc); /* get retries */ |
| mace_handle_misc_intrs(mp, intr, dev); |
| |
| i = mp->tx_empty; |
| while (in_8(&mb->pr) & XMTSV) { |
| del_timer(&mp->tx_timeout); |
| mp->timeout_active = 0; |
| /* |
| * Clear any interrupt indication associated with this status |
| * word. This appears to unlatch any error indication from |
| * the DMA controller. |
| */ |
| intr = in_8(&mb->ir); |
| if (intr != 0) |
| mace_handle_misc_intrs(mp, intr, dev); |
| if (mp->tx_bad_runt) { |
| fs = in_8(&mb->xmtfs); |
| mp->tx_bad_runt = 0; |
| out_8(&mb->xmtfc, AUTO_PAD_XMIT); |
| continue; |
| } |
| dstat = ld_le32(&td->status); |
| /* stop DMA controller */ |
| out_le32(&td->control, RUN << 16); |
| /* |
| * xcount is the number of complete frames which have been |
| * written to the fifo but for which status has not been read. |
| */ |
| xcount = (in_8(&mb->fifofc) >> XMTFC_SH) & XMTFC_MASK; |
| if (xcount == 0 || (dstat & DEAD)) { |
| /* |
| * If a packet was aborted before the DMA controller has |
| * finished transferring it, it seems that there are 2 bytes |
| * which are stuck in some buffer somewhere. These will get |
| * transmitted as soon as we read the frame status (which |
| * reenables the transmit data transfer request). Turning |
| * off the DMA controller and/or resetting the MACE doesn't |
| * help. So we disable auto-padding and FCS transmission |
| * so the two bytes will only be a runt packet which should |
| * be ignored by other stations. |
| */ |
| out_8(&mb->xmtfc, DXMTFCS); |
| } |
| fs = in_8(&mb->xmtfs); |
| if ((fs & XMTSV) == 0) { |
| printk(KERN_ERR "mace: xmtfs not valid! (fs=%x xc=%d ds=%x)\n", |
| fs, xcount, dstat); |
| mace_reset(dev); |
| /* |
| * XXX mace likes to hang the machine after a xmtfs error. |
| * This is hard to reproduce, reseting *may* help |
| */ |
| } |
| cp = mp->tx_cmds + NCMDS_TX * i; |
| stat = ld_le16(&cp->xfer_status); |
| if ((fs & (UFLO|LCOL|LCAR|RTRY)) || (dstat & DEAD) || xcount == 0) { |
| /* |
| * Check whether there were in fact 2 bytes written to |
| * the transmit FIFO. |
| */ |
| udelay(1); |
| x = (in_8(&mb->fifofc) >> XMTFC_SH) & XMTFC_MASK; |
| if (x != 0) { |
| /* there were two bytes with an end-of-packet indication */ |
| mp->tx_bad_runt = 1; |
| mace_set_timeout(dev); |
| } else { |
| /* |
| * Either there weren't the two bytes buffered up, or they |
| * didn't have an end-of-packet indication. |
| * We flush the transmit FIFO just in case (by setting the |
| * XMTFWU bit with the transmitter disabled). |
| */ |
| out_8(&mb->maccc, in_8(&mb->maccc) & ~ENXMT); |
| out_8(&mb->fifocc, in_8(&mb->fifocc) | XMTFWU); |
| udelay(1); |
| out_8(&mb->maccc, in_8(&mb->maccc) | ENXMT); |
| out_8(&mb->xmtfc, AUTO_PAD_XMIT); |
| } |
| } |
| /* dma should have finished */ |
| if (i == mp->tx_fill) { |
| printk(KERN_DEBUG "mace: tx ring ran out? (fs=%x xc=%d ds=%x)\n", |
| fs, xcount, dstat); |
| continue; |
| } |
| /* Update stats */ |
| if (fs & (UFLO|LCOL|LCAR|RTRY)) { |
| ++dev->stats.tx_errors; |
| if (fs & LCAR) |
| ++dev->stats.tx_carrier_errors; |
| if (fs & (UFLO|LCOL|RTRY)) |
| ++dev->stats.tx_aborted_errors; |
| } else { |
| dev->stats.tx_bytes += mp->tx_bufs[i]->len; |
| ++dev->stats.tx_packets; |
| } |
| dev_kfree_skb_irq(mp->tx_bufs[i]); |
| --mp->tx_active; |
| if (++i >= N_TX_RING) |
| i = 0; |
| #if 0 |
| mace_last_fs = fs; |
| mace_last_xcount = xcount; |
| #endif |
| } |
| |
| if (i != mp->tx_empty) { |
| mp->tx_fullup = 0; |
| netif_wake_queue(dev); |
| } |
| mp->tx_empty = i; |
| i += mp->tx_active; |
| if (i >= N_TX_RING) |
| i -= N_TX_RING; |
| if (!mp->tx_bad_runt && i != mp->tx_fill && mp->tx_active < MAX_TX_ACTIVE) { |
| do { |
| /* set up the next one */ |
| cp = mp->tx_cmds + NCMDS_TX * i; |
| out_le16(&cp->xfer_status, 0); |
| out_le16(&cp->command, OUTPUT_LAST); |
| ++mp->tx_active; |
| if (++i >= N_TX_RING) |
| i = 0; |
| } while (i != mp->tx_fill && mp->tx_active < MAX_TX_ACTIVE); |
| out_le32(&td->control, ((RUN|WAKE) << 16) + (RUN|WAKE)); |
| mace_set_timeout(dev); |
| } |
| spin_unlock_irqrestore(&mp->lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| static void mace_tx_timeout(unsigned long data) |
| { |
| struct net_device *dev = (struct net_device *) data; |
| struct mace_data *mp = netdev_priv(dev); |
| volatile struct mace __iomem *mb = mp->mace; |
| volatile struct dbdma_regs __iomem *td = mp->tx_dma; |
| volatile struct dbdma_regs __iomem *rd = mp->rx_dma; |
| volatile struct dbdma_cmd *cp; |
| unsigned long flags; |
| int i; |
| |
| spin_lock_irqsave(&mp->lock, flags); |
| mp->timeout_active = 0; |
| if (mp->tx_active == 0 && !mp->tx_bad_runt) |
| goto out; |
| |
| /* update various counters */ |
| mace_handle_misc_intrs(mp, in_8(&mb->ir), dev); |
| |
| cp = mp->tx_cmds + NCMDS_TX * mp->tx_empty; |
| |
| /* turn off both tx and rx and reset the chip */ |
| out_8(&mb->maccc, 0); |
| printk(KERN_ERR "mace: transmit timeout - resetting\n"); |
| dbdma_reset(td); |
| mace_reset(dev); |
| |
| /* restart rx dma */ |
| cp = bus_to_virt(ld_le32(&rd->cmdptr)); |
| dbdma_reset(rd); |
| out_le16(&cp->xfer_status, 0); |
| out_le32(&rd->cmdptr, virt_to_bus(cp)); |
| out_le32(&rd->control, (RUN << 16) | RUN); |
| |
| /* fix up the transmit side */ |
| i = mp->tx_empty; |
| mp->tx_active = 0; |
| ++dev->stats.tx_errors; |
| if (mp->tx_bad_runt) { |
| mp->tx_bad_runt = 0; |
| } else if (i != mp->tx_fill) { |
| dev_kfree_skb(mp->tx_bufs[i]); |
| if (++i >= N_TX_RING) |
| i = 0; |
| mp->tx_empty = i; |
| } |
| mp->tx_fullup = 0; |
| netif_wake_queue(dev); |
| if (i != mp->tx_fill) { |
| cp = mp->tx_cmds + NCMDS_TX * i; |
| out_le16(&cp->xfer_status, 0); |
| out_le16(&cp->command, OUTPUT_LAST); |
| out_le32(&td->cmdptr, virt_to_bus(cp)); |
| out_le32(&td->control, (RUN << 16) | RUN); |
| ++mp->tx_active; |
| mace_set_timeout(dev); |
| } |
| |
| /* turn it back on */ |
| out_8(&mb->imr, RCVINT); |
| out_8(&mb->maccc, mp->maccc); |
| |
| out: |
| spin_unlock_irqrestore(&mp->lock, flags); |
| } |
| |
| static irqreturn_t mace_txdma_intr(int irq, void *dev_id) |
| { |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t mace_rxdma_intr(int irq, void *dev_id) |
| { |
| struct net_device *dev = (struct net_device *) dev_id; |
| struct mace_data *mp = netdev_priv(dev); |
| volatile struct dbdma_regs __iomem *rd = mp->rx_dma; |
| volatile struct dbdma_cmd *cp, *np; |
| int i, nb, stat, next; |
| struct sk_buff *skb; |
| unsigned frame_status; |
| static int mace_lost_status; |
| unsigned char *data; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&mp->lock, flags); |
| for (i = mp->rx_empty; i != mp->rx_fill; ) { |
| cp = mp->rx_cmds + i; |
| stat = ld_le16(&cp->xfer_status); |
| if ((stat & ACTIVE) == 0) { |
| next = i + 1; |
| if (next >= N_RX_RING) |
| next = 0; |
| np = mp->rx_cmds + next; |
| if (next != mp->rx_fill && |
| (ld_le16(&np->xfer_status) & ACTIVE) != 0) { |
| printk(KERN_DEBUG "mace: lost a status word\n"); |
| ++mace_lost_status; |
| } else |
| break; |
| } |
| nb = ld_le16(&cp->req_count) - ld_le16(&cp->res_count); |
| out_le16(&cp->command, DBDMA_STOP); |
| /* got a packet, have a look at it */ |
| skb = mp->rx_bufs[i]; |
| if (!skb) { |
| ++dev->stats.rx_dropped; |
| } else if (nb > 8) { |
| data = skb->data; |
| frame_status = (data[nb-3] << 8) + data[nb-4]; |
| if (frame_status & (RS_OFLO|RS_CLSN|RS_FRAMERR|RS_FCSERR)) { |
| ++dev->stats.rx_errors; |
| if (frame_status & RS_OFLO) |
| ++dev->stats.rx_over_errors; |
| if (frame_status & RS_FRAMERR) |
| ++dev->stats.rx_frame_errors; |
| if (frame_status & RS_FCSERR) |
| ++dev->stats.rx_crc_errors; |
| } else { |
| /* Mace feature AUTO_STRIP_RCV is on by default, dropping the |
| * FCS on frames with 802.3 headers. This means that Ethernet |
| * frames have 8 extra octets at the end, while 802.3 frames |
| * have only 4. We need to correctly account for this. */ |
| if (*(unsigned short *)(data+12) < 1536) /* 802.3 header */ |
| nb -= 4; |
| else /* Ethernet header; mace includes FCS */ |
| nb -= 8; |
| skb_put(skb, nb); |
| skb->protocol = eth_type_trans(skb, dev); |
| dev->stats.rx_bytes += skb->len; |
| netif_rx(skb); |
| mp->rx_bufs[i] = NULL; |
| ++dev->stats.rx_packets; |
| } |
| } else { |
| ++dev->stats.rx_errors; |
| ++dev->stats.rx_length_errors; |
| } |
| |
| /* advance to next */ |
| if (++i >= N_RX_RING) |
| i = 0; |
| } |
| mp->rx_empty = i; |
| |
| i = mp->rx_fill; |
| for (;;) { |
| next = i + 1; |
| if (next >= N_RX_RING) |
| next = 0; |
| if (next == mp->rx_empty) |
| break; |
| cp = mp->rx_cmds + i; |
| skb = mp->rx_bufs[i]; |
| if (!skb) { |
| skb = dev_alloc_skb(RX_BUFLEN + 2); |
| if (skb) { |
| skb_reserve(skb, 2); |
| mp->rx_bufs[i] = skb; |
| } |
| } |
| st_le16(&cp->req_count, RX_BUFLEN); |
| data = skb? skb->data: dummy_buf; |
| st_le32(&cp->phy_addr, virt_to_bus(data)); |
| out_le16(&cp->xfer_status, 0); |
| out_le16(&cp->command, INPUT_LAST + INTR_ALWAYS); |
| #if 0 |
| if ((ld_le32(&rd->status) & ACTIVE) != 0) { |
| out_le32(&rd->control, (PAUSE << 16) | PAUSE); |
| while ((in_le32(&rd->status) & ACTIVE) != 0) |
| ; |
| } |
| #endif |
| i = next; |
| } |
| if (i != mp->rx_fill) { |
| out_le32(&rd->control, ((RUN|WAKE) << 16) | (RUN|WAKE)); |
| mp->rx_fill = i; |
| } |
| spin_unlock_irqrestore(&mp->lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| static struct of_device_id mace_match[] = |
| { |
| { |
| .name = "mace", |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE (of, mace_match); |
| |
| static struct macio_driver mace_driver = |
| { |
| .driver = { |
| .name = "mace", |
| .owner = THIS_MODULE, |
| .of_match_table = mace_match, |
| }, |
| .probe = mace_probe, |
| .remove = mace_remove, |
| }; |
| |
| |
| static int __init mace_init(void) |
| { |
| return macio_register_driver(&mace_driver); |
| } |
| |
| static void __exit mace_cleanup(void) |
| { |
| macio_unregister_driver(&mace_driver); |
| |
| kfree(dummy_buf); |
| dummy_buf = NULL; |
| } |
| |
| MODULE_AUTHOR("Paul Mackerras"); |
| MODULE_DESCRIPTION("PowerMac MACE driver."); |
| module_param(port_aaui, int, 0); |
| MODULE_PARM_DESC(port_aaui, "MACE uses AAUI port (0-1)"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(mace_init); |
| module_exit(mace_cleanup); |