| /****************************************************************************** |
| * |
| * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| *****************************************************************************/ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/skbuff.h> |
| #include <linux/slab.h> |
| #include <net/mac80211.h> |
| |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/delay.h> |
| |
| #include <linux/workqueue.h> |
| |
| #include "iwl-commands.h" |
| #include "iwl-3945.h" |
| #include "iwl-sta.h" |
| |
| #define RS_NAME "iwl-3945-rs" |
| |
| static s32 iwl3945_expected_tpt_g[IWL_RATE_COUNT_3945] = { |
| 7, 13, 35, 58, 0, 0, 76, 104, 130, 168, 191, 202 |
| }; |
| |
| static s32 iwl3945_expected_tpt_g_prot[IWL_RATE_COUNT_3945] = { |
| 7, 13, 35, 58, 0, 0, 0, 80, 93, 113, 123, 125 |
| }; |
| |
| static s32 iwl3945_expected_tpt_a[IWL_RATE_COUNT_3945] = { |
| 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186 |
| }; |
| |
| static s32 iwl3945_expected_tpt_b[IWL_RATE_COUNT_3945] = { |
| 7, 13, 35, 58, 0, 0, 0, 0, 0, 0, 0, 0 |
| }; |
| |
| struct iwl3945_tpt_entry { |
| s8 min_rssi; |
| u8 index; |
| }; |
| |
| static struct iwl3945_tpt_entry iwl3945_tpt_table_a[] = { |
| {-60, IWL_RATE_54M_INDEX}, |
| {-64, IWL_RATE_48M_INDEX}, |
| {-72, IWL_RATE_36M_INDEX}, |
| {-80, IWL_RATE_24M_INDEX}, |
| {-84, IWL_RATE_18M_INDEX}, |
| {-85, IWL_RATE_12M_INDEX}, |
| {-87, IWL_RATE_9M_INDEX}, |
| {-89, IWL_RATE_6M_INDEX} |
| }; |
| |
| static struct iwl3945_tpt_entry iwl3945_tpt_table_g[] = { |
| {-60, IWL_RATE_54M_INDEX}, |
| {-64, IWL_RATE_48M_INDEX}, |
| {-68, IWL_RATE_36M_INDEX}, |
| {-80, IWL_RATE_24M_INDEX}, |
| {-84, IWL_RATE_18M_INDEX}, |
| {-85, IWL_RATE_12M_INDEX}, |
| {-86, IWL_RATE_11M_INDEX}, |
| {-88, IWL_RATE_5M_INDEX}, |
| {-90, IWL_RATE_2M_INDEX}, |
| {-92, IWL_RATE_1M_INDEX} |
| }; |
| |
| #define IWL_RATE_MAX_WINDOW 62 |
| #define IWL_RATE_FLUSH (3*HZ) |
| #define IWL_RATE_WIN_FLUSH (HZ/2) |
| #define IWL39_RATE_HIGH_TH 11520 |
| #define IWL_SUCCESS_UP_TH 8960 |
| #define IWL_SUCCESS_DOWN_TH 10880 |
| #define IWL_RATE_MIN_FAILURE_TH 6 |
| #define IWL_RATE_MIN_SUCCESS_TH 8 |
| #define IWL_RATE_DECREASE_TH 1920 |
| #define IWL_RATE_RETRY_TH 15 |
| |
| static u8 iwl3945_get_rate_index_by_rssi(s32 rssi, enum ieee80211_band band) |
| { |
| u32 index = 0; |
| u32 table_size = 0; |
| struct iwl3945_tpt_entry *tpt_table = NULL; |
| |
| if ((rssi < IWL_MIN_RSSI_VAL) || (rssi > IWL_MAX_RSSI_VAL)) |
| rssi = IWL_MIN_RSSI_VAL; |
| |
| switch (band) { |
| case IEEE80211_BAND_2GHZ: |
| tpt_table = iwl3945_tpt_table_g; |
| table_size = ARRAY_SIZE(iwl3945_tpt_table_g); |
| break; |
| |
| case IEEE80211_BAND_5GHZ: |
| tpt_table = iwl3945_tpt_table_a; |
| table_size = ARRAY_SIZE(iwl3945_tpt_table_a); |
| break; |
| |
| default: |
| BUG(); |
| break; |
| } |
| |
| while ((index < table_size) && (rssi < tpt_table[index].min_rssi)) |
| index++; |
| |
| index = min(index, (table_size - 1)); |
| |
| return tpt_table[index].index; |
| } |
| |
| static void iwl3945_clear_window(struct iwl3945_rate_scale_data *window) |
| { |
| window->data = 0; |
| window->success_counter = 0; |
| window->success_ratio = -1; |
| window->counter = 0; |
| window->average_tpt = IWL_INVALID_VALUE; |
| window->stamp = 0; |
| } |
| |
| /** |
| * iwl3945_rate_scale_flush_windows - flush out the rate scale windows |
| * |
| * Returns the number of windows that have gathered data but were |
| * not flushed. If there were any that were not flushed, then |
| * reschedule the rate flushing routine. |
| */ |
| static int iwl3945_rate_scale_flush_windows(struct iwl3945_rs_sta *rs_sta) |
| { |
| int unflushed = 0; |
| int i; |
| unsigned long flags; |
| struct iwl_priv *priv __maybe_unused = rs_sta->priv; |
| |
| /* |
| * For each rate, if we have collected data on that rate |
| * and it has been more than IWL_RATE_WIN_FLUSH |
| * since we flushed, clear out the gathered statistics |
| */ |
| for (i = 0; i < IWL_RATE_COUNT_3945; i++) { |
| if (!rs_sta->win[i].counter) |
| continue; |
| |
| spin_lock_irqsave(&rs_sta->lock, flags); |
| if (time_after(jiffies, rs_sta->win[i].stamp + |
| IWL_RATE_WIN_FLUSH)) { |
| IWL_DEBUG_RATE(priv, "flushing %d samples of rate " |
| "index %d\n", |
| rs_sta->win[i].counter, i); |
| iwl3945_clear_window(&rs_sta->win[i]); |
| } else |
| unflushed++; |
| spin_unlock_irqrestore(&rs_sta->lock, flags); |
| } |
| |
| return unflushed; |
| } |
| |
| #define IWL_RATE_FLUSH_MAX 5000 /* msec */ |
| #define IWL_RATE_FLUSH_MIN 50 /* msec */ |
| #define IWL_AVERAGE_PACKETS 1500 |
| |
| static void iwl3945_bg_rate_scale_flush(unsigned long data) |
| { |
| struct iwl3945_rs_sta *rs_sta = (void *)data; |
| struct iwl_priv *priv __maybe_unused = rs_sta->priv; |
| int unflushed = 0; |
| unsigned long flags; |
| u32 packet_count, duration, pps; |
| |
| IWL_DEBUG_RATE(priv, "enter\n"); |
| |
| unflushed = iwl3945_rate_scale_flush_windows(rs_sta); |
| |
| spin_lock_irqsave(&rs_sta->lock, flags); |
| |
| /* Number of packets Rx'd since last time this timer ran */ |
| packet_count = (rs_sta->tx_packets - rs_sta->last_tx_packets) + 1; |
| |
| rs_sta->last_tx_packets = rs_sta->tx_packets + 1; |
| |
| if (unflushed) { |
| duration = |
| jiffies_to_msecs(jiffies - rs_sta->last_partial_flush); |
| |
| IWL_DEBUG_RATE(priv, "Tx'd %d packets in %dms\n", |
| packet_count, duration); |
| |
| /* Determine packets per second */ |
| if (duration) |
| pps = (packet_count * 1000) / duration; |
| else |
| pps = 0; |
| |
| if (pps) { |
| duration = (IWL_AVERAGE_PACKETS * 1000) / pps; |
| if (duration < IWL_RATE_FLUSH_MIN) |
| duration = IWL_RATE_FLUSH_MIN; |
| else if (duration > IWL_RATE_FLUSH_MAX) |
| duration = IWL_RATE_FLUSH_MAX; |
| } else |
| duration = IWL_RATE_FLUSH_MAX; |
| |
| rs_sta->flush_time = msecs_to_jiffies(duration); |
| |
| IWL_DEBUG_RATE(priv, "new flush period: %d msec ave %d\n", |
| duration, packet_count); |
| |
| mod_timer(&rs_sta->rate_scale_flush, jiffies + |
| rs_sta->flush_time); |
| |
| rs_sta->last_partial_flush = jiffies; |
| } else { |
| rs_sta->flush_time = IWL_RATE_FLUSH; |
| rs_sta->flush_pending = 0; |
| } |
| /* If there weren't any unflushed entries, we don't schedule the timer |
| * to run again */ |
| |
| rs_sta->last_flush = jiffies; |
| |
| spin_unlock_irqrestore(&rs_sta->lock, flags); |
| |
| IWL_DEBUG_RATE(priv, "leave\n"); |
| } |
| |
| /** |
| * iwl3945_collect_tx_data - Update the success/failure sliding window |
| * |
| * We keep a sliding window of the last 64 packets transmitted |
| * at this rate. window->data contains the bitmask of successful |
| * packets. |
| */ |
| static void iwl3945_collect_tx_data(struct iwl3945_rs_sta *rs_sta, |
| struct iwl3945_rate_scale_data *window, |
| int success, int retries, int index) |
| { |
| unsigned long flags; |
| s32 fail_count; |
| struct iwl_priv *priv __maybe_unused = rs_sta->priv; |
| |
| if (!retries) { |
| IWL_DEBUG_RATE(priv, "leave: retries == 0 -- should be at least 1\n"); |
| return; |
| } |
| |
| spin_lock_irqsave(&rs_sta->lock, flags); |
| |
| /* |
| * Keep track of only the latest 62 tx frame attempts in this rate's |
| * history window; anything older isn't really relevant any more. |
| * If we have filled up the sliding window, drop the oldest attempt; |
| * if the oldest attempt (highest bit in bitmap) shows "success", |
| * subtract "1" from the success counter (this is the main reason |
| * we keep these bitmaps!). |
| * */ |
| while (retries > 0) { |
| if (window->counter >= IWL_RATE_MAX_WINDOW) { |
| |
| /* remove earliest */ |
| window->counter = IWL_RATE_MAX_WINDOW - 1; |
| |
| if (window->data & (1ULL << (IWL_RATE_MAX_WINDOW - 1))) { |
| window->data &= ~(1ULL << (IWL_RATE_MAX_WINDOW - 1)); |
| window->success_counter--; |
| } |
| } |
| |
| /* Increment frames-attempted counter */ |
| window->counter++; |
| |
| /* Shift bitmap by one frame (throw away oldest history), |
| * OR in "1", and increment "success" if this |
| * frame was successful. */ |
| window->data <<= 1; |
| if (success > 0) { |
| window->success_counter++; |
| window->data |= 0x1; |
| success--; |
| } |
| |
| retries--; |
| } |
| |
| /* Calculate current success ratio, avoid divide-by-0! */ |
| if (window->counter > 0) |
| window->success_ratio = 128 * (100 * window->success_counter) |
| / window->counter; |
| else |
| window->success_ratio = IWL_INVALID_VALUE; |
| |
| fail_count = window->counter - window->success_counter; |
| |
| /* Calculate average throughput, if we have enough history. */ |
| if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || |
| (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) |
| window->average_tpt = ((window->success_ratio * |
| rs_sta->expected_tpt[index] + 64) / 128); |
| else |
| window->average_tpt = IWL_INVALID_VALUE; |
| |
| /* Tag this window as having been updated */ |
| window->stamp = jiffies; |
| |
| spin_unlock_irqrestore(&rs_sta->lock, flags); |
| |
| } |
| |
| /* |
| * Called after adding a new station to initialize rate scaling |
| */ |
| void iwl3945_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id) |
| { |
| struct ieee80211_hw *hw = priv->hw; |
| struct ieee80211_conf *conf = &priv->hw->conf; |
| struct iwl3945_sta_priv *psta; |
| struct iwl3945_rs_sta *rs_sta; |
| struct ieee80211_supported_band *sband; |
| int i; |
| |
| IWL_DEBUG_INFO(priv, "enter\n"); |
| if (sta_id == priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id) |
| goto out; |
| |
| psta = (struct iwl3945_sta_priv *) sta->drv_priv; |
| rs_sta = &psta->rs_sta; |
| sband = hw->wiphy->bands[conf->channel->band]; |
| |
| rs_sta->priv = priv; |
| |
| rs_sta->start_rate = IWL_RATE_INVALID; |
| |
| /* default to just 802.11b */ |
| rs_sta->expected_tpt = iwl3945_expected_tpt_b; |
| |
| rs_sta->last_partial_flush = jiffies; |
| rs_sta->last_flush = jiffies; |
| rs_sta->flush_time = IWL_RATE_FLUSH; |
| rs_sta->last_tx_packets = 0; |
| |
| rs_sta->rate_scale_flush.data = (unsigned long)rs_sta; |
| rs_sta->rate_scale_flush.function = iwl3945_bg_rate_scale_flush; |
| |
| for (i = 0; i < IWL_RATE_COUNT_3945; i++) |
| iwl3945_clear_window(&rs_sta->win[i]); |
| |
| /* TODO: what is a good starting rate for STA? About middle? Maybe not |
| * the lowest or the highest rate.. Could consider using RSSI from |
| * previous packets? Need to have IEEE 802.1X auth succeed immediately |
| * after assoc.. */ |
| |
| for (i = sband->n_bitrates - 1; i >= 0; i--) { |
| if (sta->supp_rates[sband->band] & (1 << i)) { |
| rs_sta->last_txrate_idx = i; |
| break; |
| } |
| } |
| |
| priv->_3945.sta_supp_rates = sta->supp_rates[sband->band]; |
| /* For 5 GHz band it start at IWL_FIRST_OFDM_RATE */ |
| if (sband->band == IEEE80211_BAND_5GHZ) { |
| rs_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; |
| priv->_3945.sta_supp_rates = priv->_3945.sta_supp_rates << |
| IWL_FIRST_OFDM_RATE; |
| } |
| |
| out: |
| priv->stations[sta_id].used &= ~IWL_STA_UCODE_INPROGRESS; |
| |
| IWL_DEBUG_INFO(priv, "leave\n"); |
| } |
| |
| static void *iwl3945_rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) |
| { |
| return hw->priv; |
| } |
| |
| /* rate scale requires free function to be implemented */ |
| static void iwl3945_rs_free(void *priv) |
| { |
| return; |
| } |
| |
| static void *iwl3945_rs_alloc_sta(void *iwl_priv, struct ieee80211_sta *sta, gfp_t gfp) |
| { |
| struct iwl3945_rs_sta *rs_sta; |
| struct iwl3945_sta_priv *psta = (void *) sta->drv_priv; |
| struct iwl_priv *priv __maybe_unused = iwl_priv; |
| |
| IWL_DEBUG_RATE(priv, "enter\n"); |
| |
| rs_sta = &psta->rs_sta; |
| |
| spin_lock_init(&rs_sta->lock); |
| init_timer(&rs_sta->rate_scale_flush); |
| |
| IWL_DEBUG_RATE(priv, "leave\n"); |
| |
| return rs_sta; |
| } |
| |
| static void iwl3945_rs_free_sta(void *iwl_priv, struct ieee80211_sta *sta, |
| void *priv_sta) |
| { |
| struct iwl3945_rs_sta *rs_sta = priv_sta; |
| |
| /* |
| * Be careful not to use any members of iwl3945_rs_sta (like trying |
| * to use iwl_priv to print out debugging) since it may not be fully |
| * initialized at this point. |
| */ |
| del_timer_sync(&rs_sta->rate_scale_flush); |
| } |
| |
| |
| /** |
| * iwl3945_rs_tx_status - Update rate control values based on Tx results |
| * |
| * NOTE: Uses iwl_priv->retry_rate for the # of retries attempted by |
| * the hardware for each rate. |
| */ |
| static void iwl3945_rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband, |
| struct ieee80211_sta *sta, void *priv_sta, |
| struct sk_buff *skb) |
| { |
| s8 retries = 0, current_count; |
| int scale_rate_index, first_index, last_index; |
| unsigned long flags; |
| struct iwl_priv *priv = (struct iwl_priv *)priv_rate; |
| struct iwl3945_rs_sta *rs_sta = priv_sta; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| |
| IWL_DEBUG_RATE(priv, "enter\n"); |
| |
| retries = info->status.rates[0].count; |
| /* Sanity Check for retries */ |
| if (retries > IWL_RATE_RETRY_TH) |
| retries = IWL_RATE_RETRY_TH; |
| |
| first_index = sband->bitrates[info->status.rates[0].idx].hw_value; |
| if ((first_index < 0) || (first_index >= IWL_RATE_COUNT_3945)) { |
| IWL_DEBUG_RATE(priv, "leave: Rate out of bounds: %d\n", first_index); |
| return; |
| } |
| |
| if (!priv_sta) { |
| IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n"); |
| return; |
| } |
| |
| /* Treat uninitialized rate scaling data same as non-existing. */ |
| if (!rs_sta->priv) { |
| IWL_DEBUG_RATE(priv, "leave: STA priv data uninitialized!\n"); |
| return; |
| } |
| |
| |
| rs_sta->tx_packets++; |
| |
| scale_rate_index = first_index; |
| last_index = first_index; |
| |
| /* |
| * Update the window for each rate. We determine which rates |
| * were Tx'd based on the total number of retries vs. the number |
| * of retries configured for each rate -- currently set to the |
| * priv value 'retry_rate' vs. rate specific |
| * |
| * On exit from this while loop last_index indicates the rate |
| * at which the frame was finally transmitted (or failed if no |
| * ACK) |
| */ |
| while (retries > 1) { |
| if ((retries - 1) < priv->retry_rate) { |
| current_count = (retries - 1); |
| last_index = scale_rate_index; |
| } else { |
| current_count = priv->retry_rate; |
| last_index = iwl3945_rs_next_rate(priv, |
| scale_rate_index); |
| } |
| |
| /* Update this rate accounting for as many retries |
| * as was used for it (per current_count) */ |
| iwl3945_collect_tx_data(rs_sta, |
| &rs_sta->win[scale_rate_index], |
| 0, current_count, scale_rate_index); |
| IWL_DEBUG_RATE(priv, "Update rate %d for %d retries.\n", |
| scale_rate_index, current_count); |
| |
| retries -= current_count; |
| |
| scale_rate_index = last_index; |
| } |
| |
| |
| /* Update the last index window with success/failure based on ACK */ |
| IWL_DEBUG_RATE(priv, "Update rate %d with %s.\n", |
| last_index, |
| (info->flags & IEEE80211_TX_STAT_ACK) ? |
| "success" : "failure"); |
| iwl3945_collect_tx_data(rs_sta, |
| &rs_sta->win[last_index], |
| info->flags & IEEE80211_TX_STAT_ACK, 1, last_index); |
| |
| /* We updated the rate scale window -- if its been more than |
| * flush_time since the last run, schedule the flush |
| * again */ |
| spin_lock_irqsave(&rs_sta->lock, flags); |
| |
| if (!rs_sta->flush_pending && |
| time_after(jiffies, rs_sta->last_flush + |
| rs_sta->flush_time)) { |
| |
| rs_sta->last_partial_flush = jiffies; |
| rs_sta->flush_pending = 1; |
| mod_timer(&rs_sta->rate_scale_flush, |
| jiffies + rs_sta->flush_time); |
| } |
| |
| spin_unlock_irqrestore(&rs_sta->lock, flags); |
| |
| IWL_DEBUG_RATE(priv, "leave\n"); |
| } |
| |
| static u16 iwl3945_get_adjacent_rate(struct iwl3945_rs_sta *rs_sta, |
| u8 index, u16 rate_mask, enum ieee80211_band band) |
| { |
| u8 high = IWL_RATE_INVALID; |
| u8 low = IWL_RATE_INVALID; |
| struct iwl_priv *priv __maybe_unused = rs_sta->priv; |
| |
| /* 802.11A walks to the next literal adjacent rate in |
| * the rate table */ |
| if (unlikely(band == IEEE80211_BAND_5GHZ)) { |
| int i; |
| u32 mask; |
| |
| /* Find the previous rate that is in the rate mask */ |
| i = index - 1; |
| for (mask = (1 << i); i >= 0; i--, mask >>= 1) { |
| if (rate_mask & mask) { |
| low = i; |
| break; |
| } |
| } |
| |
| /* Find the next rate that is in the rate mask */ |
| i = index + 1; |
| for (mask = (1 << i); i < IWL_RATE_COUNT_3945; |
| i++, mask <<= 1) { |
| if (rate_mask & mask) { |
| high = i; |
| break; |
| } |
| } |
| |
| return (high << 8) | low; |
| } |
| |
| low = index; |
| while (low != IWL_RATE_INVALID) { |
| if (rs_sta->tgg) |
| low = iwl3945_rates[low].prev_rs_tgg; |
| else |
| low = iwl3945_rates[low].prev_rs; |
| if (low == IWL_RATE_INVALID) |
| break; |
| if (rate_mask & (1 << low)) |
| break; |
| IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low); |
| } |
| |
| high = index; |
| while (high != IWL_RATE_INVALID) { |
| if (rs_sta->tgg) |
| high = iwl3945_rates[high].next_rs_tgg; |
| else |
| high = iwl3945_rates[high].next_rs; |
| if (high == IWL_RATE_INVALID) |
| break; |
| if (rate_mask & (1 << high)) |
| break; |
| IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high); |
| } |
| |
| return (high << 8) | low; |
| } |
| |
| /** |
| * iwl3945_rs_get_rate - find the rate for the requested packet |
| * |
| * Returns the ieee80211_rate structure allocated by the driver. |
| * |
| * The rate control algorithm has no internal mapping between hw_mode's |
| * rate ordering and the rate ordering used by the rate control algorithm. |
| * |
| * The rate control algorithm uses a single table of rates that goes across |
| * the entire A/B/G spectrum vs. being limited to just one particular |
| * hw_mode. |
| * |
| * As such, we can't convert the index obtained below into the hw_mode's |
| * rate table and must reference the driver allocated rate table |
| * |
| */ |
| static void iwl3945_rs_get_rate(void *priv_r, struct ieee80211_sta *sta, |
| void *priv_sta, struct ieee80211_tx_rate_control *txrc) |
| { |
| struct ieee80211_supported_band *sband = txrc->sband; |
| struct sk_buff *skb = txrc->skb; |
| u8 low = IWL_RATE_INVALID; |
| u8 high = IWL_RATE_INVALID; |
| u16 high_low; |
| int index; |
| struct iwl3945_rs_sta *rs_sta = priv_sta; |
| struct iwl3945_rate_scale_data *window = NULL; |
| int current_tpt = IWL_INVALID_VALUE; |
| int low_tpt = IWL_INVALID_VALUE; |
| int high_tpt = IWL_INVALID_VALUE; |
| u32 fail_count; |
| s8 scale_action = 0; |
| unsigned long flags; |
| u16 rate_mask; |
| s8 max_rate_idx = -1; |
| struct iwl_priv *priv __maybe_unused = (struct iwl_priv *)priv_r; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| |
| IWL_DEBUG_RATE(priv, "enter\n"); |
| |
| /* Treat uninitialized rate scaling data same as non-existing. */ |
| if (rs_sta && !rs_sta->priv) { |
| IWL_DEBUG_RATE(priv, "Rate scaling information not initialized yet.\n"); |
| priv_sta = NULL; |
| } |
| |
| if (rate_control_send_low(sta, priv_sta, txrc)) |
| return; |
| |
| rate_mask = sta->supp_rates[sband->band]; |
| |
| /* get user max rate if set */ |
| max_rate_idx = txrc->max_rate_idx; |
| if ((sband->band == IEEE80211_BAND_5GHZ) && (max_rate_idx != -1)) |
| max_rate_idx += IWL_FIRST_OFDM_RATE; |
| if ((max_rate_idx < 0) || (max_rate_idx >= IWL_RATE_COUNT)) |
| max_rate_idx = -1; |
| |
| index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT_3945 - 1); |
| |
| if (sband->band == IEEE80211_BAND_5GHZ) |
| rate_mask = rate_mask << IWL_FIRST_OFDM_RATE; |
| |
| spin_lock_irqsave(&rs_sta->lock, flags); |
| |
| /* for recent assoc, choose best rate regarding |
| * to rssi value |
| */ |
| if (rs_sta->start_rate != IWL_RATE_INVALID) { |
| if (rs_sta->start_rate < index && |
| (rate_mask & (1 << rs_sta->start_rate))) |
| index = rs_sta->start_rate; |
| rs_sta->start_rate = IWL_RATE_INVALID; |
| } |
| |
| /* force user max rate if set by user */ |
| if ((max_rate_idx != -1) && (max_rate_idx < index)) { |
| if (rate_mask & (1 << max_rate_idx)) |
| index = max_rate_idx; |
| } |
| |
| window = &(rs_sta->win[index]); |
| |
| fail_count = window->counter - window->success_counter; |
| |
| if (((fail_count < IWL_RATE_MIN_FAILURE_TH) && |
| (window->success_counter < IWL_RATE_MIN_SUCCESS_TH))) { |
| spin_unlock_irqrestore(&rs_sta->lock, flags); |
| |
| IWL_DEBUG_RATE(priv, "Invalid average_tpt on rate %d: " |
| "counter: %d, success_counter: %d, " |
| "expected_tpt is %sNULL\n", |
| index, |
| window->counter, |
| window->success_counter, |
| rs_sta->expected_tpt ? "not " : ""); |
| |
| /* Can't calculate this yet; not enough history */ |
| window->average_tpt = IWL_INVALID_VALUE; |
| goto out; |
| |
| } |
| |
| current_tpt = window->average_tpt; |
| |
| high_low = iwl3945_get_adjacent_rate(rs_sta, index, rate_mask, |
| sband->band); |
| low = high_low & 0xff; |
| high = (high_low >> 8) & 0xff; |
| |
| /* If user set max rate, dont allow higher than user constrain */ |
| if ((max_rate_idx != -1) && (max_rate_idx < high)) |
| high = IWL_RATE_INVALID; |
| |
| /* Collect Measured throughputs of adjacent rates */ |
| if (low != IWL_RATE_INVALID) |
| low_tpt = rs_sta->win[low].average_tpt; |
| |
| if (high != IWL_RATE_INVALID) |
| high_tpt = rs_sta->win[high].average_tpt; |
| |
| spin_unlock_irqrestore(&rs_sta->lock, flags); |
| |
| scale_action = 0; |
| |
| /* Low success ratio , need to drop the rate */ |
| if ((window->success_ratio < IWL_RATE_DECREASE_TH) || !current_tpt) { |
| IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n"); |
| scale_action = -1; |
| /* No throughput measured yet for adjacent rates, |
| * try increase */ |
| } else if ((low_tpt == IWL_INVALID_VALUE) && |
| (high_tpt == IWL_INVALID_VALUE)) { |
| |
| if (high != IWL_RATE_INVALID && window->success_ratio >= IWL_RATE_INCREASE_TH) |
| scale_action = 1; |
| else if (low != IWL_RATE_INVALID) |
| scale_action = 0; |
| |
| /* Both adjacent throughputs are measured, but neither one has |
| * better throughput; we're using the best rate, don't change |
| * it! */ |
| } else if ((low_tpt != IWL_INVALID_VALUE) && |
| (high_tpt != IWL_INVALID_VALUE) && |
| (low_tpt < current_tpt) && (high_tpt < current_tpt)) { |
| |
| IWL_DEBUG_RATE(priv, "No action -- low [%d] & high [%d] < " |
| "current_tpt [%d]\n", |
| low_tpt, high_tpt, current_tpt); |
| scale_action = 0; |
| |
| /* At least one of the rates has better throughput */ |
| } else { |
| if (high_tpt != IWL_INVALID_VALUE) { |
| |
| /* High rate has better throughput, Increase |
| * rate */ |
| if (high_tpt > current_tpt && |
| window->success_ratio >= IWL_RATE_INCREASE_TH) |
| scale_action = 1; |
| else { |
| IWL_DEBUG_RATE(priv, |
| "decrease rate because of high tpt\n"); |
| scale_action = 0; |
| } |
| } else if (low_tpt != IWL_INVALID_VALUE) { |
| if (low_tpt > current_tpt) { |
| IWL_DEBUG_RATE(priv, |
| "decrease rate because of low tpt\n"); |
| scale_action = -1; |
| } else if (window->success_ratio >= IWL_RATE_INCREASE_TH) { |
| /* Lower rate has better |
| * throughput,decrease rate */ |
| scale_action = 1; |
| } |
| } |
| } |
| |
| /* Sanity check; asked for decrease, but success rate or throughput |
| * has been good at old rate. Don't change it. */ |
| if ((scale_action == -1) && (low != IWL_RATE_INVALID) && |
| ((window->success_ratio > IWL_RATE_HIGH_TH) || |
| (current_tpt > (100 * rs_sta->expected_tpt[low])))) |
| scale_action = 0; |
| |
| switch (scale_action) { |
| case -1: |
| |
| /* Decrese rate */ |
| if (low != IWL_RATE_INVALID) |
| index = low; |
| break; |
| |
| case 1: |
| /* Increase rate */ |
| if (high != IWL_RATE_INVALID) |
| index = high; |
| |
| break; |
| |
| case 0: |
| default: |
| /* No change */ |
| break; |
| } |
| |
| IWL_DEBUG_RATE(priv, "Selected %d (action %d) - low %d high %d\n", |
| index, scale_action, low, high); |
| |
| out: |
| |
| if (sband->band == IEEE80211_BAND_5GHZ) { |
| if (WARN_ON_ONCE(index < IWL_FIRST_OFDM_RATE)) |
| index = IWL_FIRST_OFDM_RATE; |
| rs_sta->last_txrate_idx = index; |
| info->control.rates[0].idx = index - IWL_FIRST_OFDM_RATE; |
| } else { |
| rs_sta->last_txrate_idx = index; |
| info->control.rates[0].idx = rs_sta->last_txrate_idx; |
| } |
| |
| IWL_DEBUG_RATE(priv, "leave: %d\n", index); |
| } |
| |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| static int iwl3945_open_file_generic(struct inode *inode, struct file *file) |
| { |
| file->private_data = inode->i_private; |
| return 0; |
| } |
| |
| static ssize_t iwl3945_sta_dbgfs_stats_table_read(struct file *file, |
| char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| char *buff; |
| int desc = 0; |
| int j; |
| ssize_t ret; |
| struct iwl3945_rs_sta *lq_sta = file->private_data; |
| |
| buff = kmalloc(1024, GFP_KERNEL); |
| if (!buff) |
| return -ENOMEM; |
| |
| desc += sprintf(buff + desc, "tx packets=%d last rate index=%d\n" |
| "rate=0x%X flush time %d\n", |
| lq_sta->tx_packets, |
| lq_sta->last_txrate_idx, |
| lq_sta->start_rate, jiffies_to_msecs(lq_sta->flush_time)); |
| for (j = 0; j < IWL_RATE_COUNT_3945; j++) { |
| desc += sprintf(buff+desc, |
| "counter=%d success=%d %%=%d\n", |
| lq_sta->win[j].counter, |
| lq_sta->win[j].success_counter, |
| lq_sta->win[j].success_ratio); |
| } |
| ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); |
| kfree(buff); |
| return ret; |
| } |
| |
| static const struct file_operations rs_sta_dbgfs_stats_table_ops = { |
| .read = iwl3945_sta_dbgfs_stats_table_read, |
| .open = iwl3945_open_file_generic, |
| .llseek = default_llseek, |
| }; |
| |
| static void iwl3945_add_debugfs(void *priv, void *priv_sta, |
| struct dentry *dir) |
| { |
| struct iwl3945_rs_sta *lq_sta = priv_sta; |
| |
| lq_sta->rs_sta_dbgfs_stats_table_file = |
| debugfs_create_file("rate_stats_table", 0600, dir, |
| lq_sta, &rs_sta_dbgfs_stats_table_ops); |
| |
| } |
| |
| static void iwl3945_remove_debugfs(void *priv, void *priv_sta) |
| { |
| struct iwl3945_rs_sta *lq_sta = priv_sta; |
| debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); |
| } |
| #endif |
| |
| /* |
| * Initialization of rate scaling information is done by driver after |
| * the station is added. Since mac80211 calls this function before a |
| * station is added we ignore it. |
| */ |
| static void iwl3945_rs_rate_init_stub(void *priv_r, |
| struct ieee80211_supported_band *sband, |
| struct ieee80211_sta *sta, void *priv_sta) |
| { |
| } |
| |
| static struct rate_control_ops rs_ops = { |
| .module = NULL, |
| .name = RS_NAME, |
| .tx_status = iwl3945_rs_tx_status, |
| .get_rate = iwl3945_rs_get_rate, |
| .rate_init = iwl3945_rs_rate_init_stub, |
| .alloc = iwl3945_rs_alloc, |
| .free = iwl3945_rs_free, |
| .alloc_sta = iwl3945_rs_alloc_sta, |
| .free_sta = iwl3945_rs_free_sta, |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| .add_sta_debugfs = iwl3945_add_debugfs, |
| .remove_sta_debugfs = iwl3945_remove_debugfs, |
| #endif |
| |
| }; |
| void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id) |
| { |
| struct iwl_priv *priv = hw->priv; |
| s32 rssi = 0; |
| unsigned long flags; |
| struct iwl3945_rs_sta *rs_sta; |
| struct ieee80211_sta *sta; |
| struct iwl3945_sta_priv *psta; |
| |
| IWL_DEBUG_RATE(priv, "enter\n"); |
| |
| rcu_read_lock(); |
| |
| sta = ieee80211_find_sta(priv->contexts[IWL_RXON_CTX_BSS].vif, |
| priv->stations[sta_id].sta.sta.addr); |
| if (!sta) { |
| IWL_DEBUG_RATE(priv, "Unable to find station to initialize rate scaling.\n"); |
| rcu_read_unlock(); |
| return; |
| } |
| |
| psta = (void *) sta->drv_priv; |
| rs_sta = &psta->rs_sta; |
| |
| spin_lock_irqsave(&rs_sta->lock, flags); |
| |
| rs_sta->tgg = 0; |
| switch (priv->band) { |
| case IEEE80211_BAND_2GHZ: |
| /* TODO: this always does G, not a regression */ |
| if (priv->contexts[IWL_RXON_CTX_BSS].active.flags & |
| RXON_FLG_TGG_PROTECT_MSK) { |
| rs_sta->tgg = 1; |
| rs_sta->expected_tpt = iwl3945_expected_tpt_g_prot; |
| } else |
| rs_sta->expected_tpt = iwl3945_expected_tpt_g; |
| break; |
| |
| case IEEE80211_BAND_5GHZ: |
| rs_sta->expected_tpt = iwl3945_expected_tpt_a; |
| break; |
| case IEEE80211_NUM_BANDS: |
| BUG(); |
| break; |
| } |
| |
| spin_unlock_irqrestore(&rs_sta->lock, flags); |
| |
| rssi = priv->_3945.last_rx_rssi; |
| if (rssi == 0) |
| rssi = IWL_MIN_RSSI_VAL; |
| |
| IWL_DEBUG_RATE(priv, "Network RSSI: %d\n", rssi); |
| |
| rs_sta->start_rate = iwl3945_get_rate_index_by_rssi(rssi, priv->band); |
| |
| IWL_DEBUG_RATE(priv, "leave: rssi %d assign rate index: " |
| "%d (plcp 0x%x)\n", rssi, rs_sta->start_rate, |
| iwl3945_rates[rs_sta->start_rate].plcp); |
| rcu_read_unlock(); |
| } |
| |
| int iwl3945_rate_control_register(void) |
| { |
| return ieee80211_rate_control_register(&rs_ops); |
| } |
| |
| void iwl3945_rate_control_unregister(void) |
| { |
| ieee80211_rate_control_unregister(&rs_ops); |
| } |