| # |
| # PHY Layer Configuration |
| # |
| |
| menuconfig PHYLIB |
| tristate "PHY Device support and infrastructure" |
| depends on !S390 |
| depends on NETDEVICES |
| help |
| Ethernet controllers are usually attached to PHY |
| devices. This option provides infrastructure for |
| managing PHY devices. |
| |
| if PHYLIB |
| |
| comment "MII PHY device drivers" |
| |
| config MARVELL_PHY |
| tristate "Drivers for Marvell PHYs" |
| ---help--- |
| Currently has a driver for the 88E1011S |
| |
| config ATHEROS_PHY |
| tristate "Drivers for Atheros PHYs" |
| ---help--- |
| Currently supports AR8035 and AR8327 |
| |
| config DAVICOM_PHY |
| tristate "Drivers for Davicom PHYs" |
| ---help--- |
| Currently supports dm9161e and dm9131 |
| |
| config QSEMI_PHY |
| tristate "Drivers for Quality Semiconductor PHYs" |
| ---help--- |
| Currently supports the qs6612 |
| |
| config LXT_PHY |
| tristate "Drivers for the Intel LXT PHYs" |
| ---help--- |
| Currently supports the lxt970, lxt971 |
| |
| config CICADA_PHY |
| tristate "Drivers for the Cicada PHYs" |
| ---help--- |
| Currently supports the cis8204 |
| |
| config VITESSE_PHY |
| tristate "Drivers for the Vitesse PHYs" |
| ---help--- |
| Currently supports the vsc8244 |
| |
| config SMSC_PHY |
| tristate "Drivers for SMSC PHYs" |
| ---help--- |
| Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs |
| |
| config BROADCOM_PHY |
| tristate "Drivers for Broadcom PHYs" |
| ---help--- |
| Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481 |
| and BCM5482 PHYs. |
| |
| config BCM63XX_PHY |
| tristate "Drivers for Broadcom 63xx SOCs internal PHY" |
| depends on BCM63XX |
| ---help--- |
| Currently supports the 6348 and 6358 PHYs. |
| |
| config ICPLUS_PHY |
| tristate "Drivers for ICPlus PHYs" |
| ---help--- |
| Currently supports the IP175C and IP1001 PHYs. |
| |
| config REALTEK_PHY |
| tristate "Drivers for Realtek PHYs" |
| ---help--- |
| Supports the Realtek 821x PHY. |
| |
| config NATIONAL_PHY |
| tristate "Drivers for National Semiconductor PHYs" |
| ---help--- |
| Currently supports the DP83865 PHY. |
| |
| config STE10XP |
| tristate "Driver for STMicroelectronics STe10Xp PHYs" |
| ---help--- |
| This is the driver for the STe100p and STe101p PHYs. |
| |
| config LSI_ET1011C_PHY |
| tristate "Driver for LSI ET1011C PHY" |
| ---help--- |
| Supports the LSI ET1011C PHY. |
| |
| config MICREL_PHY |
| tristate "Driver for Micrel PHYs" |
| ---help--- |
| Supports the KSZ9021, VSC8201, KS8001 PHYs. |
| |
| config FIXED_PHY |
| bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" |
| depends on PHYLIB=y |
| ---help--- |
| Adds the platform "fixed" MDIO Bus to cover the boards that use |
| PHYs that are not connected to the real MDIO bus. |
| |
| Currently tested with mpc866ads and mpc8349e-mitx. |
| |
| config MDIO_BITBANG |
| tristate "Support for bitbanged MDIO buses" |
| help |
| This module implements the MDIO bus protocol in software, |
| for use by low level drivers that export the ability to |
| drive the relevant pins. |
| |
| If in doubt, say N. |
| |
| config MDIO_GPIO |
| tristate "Support for GPIO lib-based bitbanged MDIO buses" |
| depends on MDIO_BITBANG && GENERIC_GPIO |
| ---help--- |
| Supports GPIO lib-based MDIO busses. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called mdio-gpio. |
| |
| config MDIO_OCTEON |
| tristate "Support for MDIO buses on Octeon SOCs" |
| depends on CPU_CAVIUM_OCTEON |
| default y |
| help |
| |
| This module provides a driver for the Octeon MDIO busses. |
| It is required by the Octeon Ethernet device drivers. |
| |
| If in doubt, say Y. |
| |
| endif # PHYLIB |
