blob: 4b44a2b6a09ae84c5bdf02615929ce0dc6621460 [file] [log] [blame]
/*
* Copyright 2010 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*/
/**
* @file
*
* Some low-level simulator definitions.
*/
#ifndef __ARCH_SIM_DEF_H__
#define __ARCH_SIM_DEF_H__
/**
* Internal: the low bits of the SIM_CONTROL_* SPR values specify
* the operation to perform, and the remaining bits are
* an operation-specific parameter (often unused).
*/
#define _SIM_CONTROL_OPERATOR_BITS 8
/*
* Values which can be written to SPR_SIM_CONTROL.
*/
/** If written to SPR_SIM_CONTROL, stops profiling. */
#define SIM_CONTROL_PROFILER_DISABLE 0
/** If written to SPR_SIM_CONTROL, starts profiling. */
#define SIM_CONTROL_PROFILER_ENABLE 1
/** If written to SPR_SIM_CONTROL, clears profiling counters. */
#define SIM_CONTROL_PROFILER_CLEAR 2
/** If written to SPR_SIM_CONTROL, checkpoints the simulator. */
#define SIM_CONTROL_CHECKPOINT 3
/**
* If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8),
* sets the tracing mask to the given mask. See "sim_set_tracing()".
*/
#define SIM_CONTROL_SET_TRACING 4
/**
* If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8),
* dumps the requested items of machine state to the log.
*/
#define SIM_CONTROL_DUMP 5
/** If written to SPR_SIM_CONTROL, clears chip-level profiling counters. */
#define SIM_CONTROL_PROFILER_CHIP_CLEAR 6
/** If written to SPR_SIM_CONTROL, disables chip-level profiling. */
#define SIM_CONTROL_PROFILER_CHIP_DISABLE 7
/** If written to SPR_SIM_CONTROL, enables chip-level profiling. */
#define SIM_CONTROL_PROFILER_CHIP_ENABLE 8
/** If written to SPR_SIM_CONTROL, enables chip-level functional mode */
#define SIM_CONTROL_ENABLE_FUNCTIONAL 9
/** If written to SPR_SIM_CONTROL, disables chip-level functional mode. */
#define SIM_CONTROL_DISABLE_FUNCTIONAL 10
/**
* If written to SPR_SIM_CONTROL, enables chip-level functional mode.
* All tiles must perform this write for functional mode to be enabled.
* Ignored in naked boot mode unless --functional is specified.
* WARNING: Only the hypervisor startup code should use this!
*/
#define SIM_CONTROL_ENABLE_FUNCTIONAL_BARRIER 11
/**
* If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
* writes a string directly to the simulator output. Written to once for
* each character in the string, plus a final NUL. Instead of NUL,
* you can also use "SIM_PUTC_FLUSH_STRING" or "SIM_PUTC_FLUSH_BINARY".
*/
/* ISSUE: Document the meaning of "newline", and the handling of NUL. */
#define SIM_CONTROL_PUTC 12
/**
* If written to SPR_SIM_CONTROL, clears the --grind-coherence state for
* this core. This is intended to be used before a loop that will
* invalidate the cache by loading new data and evicting all current data.
* Generally speaking, this API should only be used by system code.
*/
#define SIM_CONTROL_GRINDER_CLEAR 13
/** If written to SPR_SIM_CONTROL, shuts down the simulator. */
#define SIM_CONTROL_SHUTDOWN 14
/**
* If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
* indicates that a fork syscall just created the given process.
*/
#define SIM_CONTROL_OS_FORK 15
/**
* If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
* indicates that an exit syscall was just executed by the given process.
*/
#define SIM_CONTROL_OS_EXIT 16
/**
* If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
* indicates that the OS just switched to the given process.
*/
#define SIM_CONTROL_OS_SWITCH 17
/**
* If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
* indicates that an exec syscall was just executed. Written to once for
* each character in the executable name, plus a final NUL.
*/
#define SIM_CONTROL_OS_EXEC 18
/**
* If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
* indicates that an interpreter (PT_INTERP) was loaded. Written to once
* for each character in "ADDR:PATH", plus a final NUL, where "ADDR" is a
* hex load address starting with "0x", and "PATH" is the executable name.
*/
#define SIM_CONTROL_OS_INTERP 19
/**
* If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
* indicates that a dll was loaded. Written to once for each character
* in "ADDR:PATH", plus a final NUL, where "ADDR" is a hexadecimal load
* address starting with "0x", and "PATH" is the executable name.
*/
#define SIM_CONTROL_DLOPEN 20
/**
* If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
* indicates that a dll was unloaded. Written to once for each character
* in "ADDR", plus a final NUL, where "ADDR" is a hexadecimal load
* address starting with "0x".
*/
#define SIM_CONTROL_DLCLOSE 21
/**
* If written to SPR_SIM_CONTROL, combined with a flag (shifted by 8),
* indicates whether to allow data reads to remotely-cached
* dirty cache lines to be cached locally without grinder warnings or
* assertions (used by Linux kernel fast memcpy).
*/
#define SIM_CONTROL_ALLOW_MULTIPLE_CACHING 22
/** If written to SPR_SIM_CONTROL, enables memory tracing. */
#define SIM_CONTROL_ENABLE_MEM_LOGGING 23
/** If written to SPR_SIM_CONTROL, disables memory tracing. */
#define SIM_CONTROL_DISABLE_MEM_LOGGING 24
/**
* If written to SPR_SIM_CONTROL, changes the shaping parameters of one of
* the gbe or xgbe shims. Must specify the shim id, the type, the units, and
* the rate, as defined in SIM_SHAPING_SPR_ARG.
*/
#define SIM_CONTROL_SHAPING 25
/**
* If written to SPR_SIM_CONTROL, combined with character (shifted by 8),
* requests that a simulator command be executed. Written to once for each
* character in the command, plus a final NUL.
*/
#define SIM_CONTROL_COMMAND 26
/**
* If written to SPR_SIM_CONTROL, indicates that the simulated system
* is panicking, to allow debugging via --debug-on-panic.
*/
#define SIM_CONTROL_PANIC 27
/**
* If written to SPR_SIM_CONTROL, triggers a simulator syscall.
* See "sim_syscall()" for more info.
*/
#define SIM_CONTROL_SYSCALL 32
/**
* If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
* provides the pid that subsequent SIM_CONTROL_OS_FORK writes should
* use as the pid, rather than the default previous SIM_CONTROL_OS_SWITCH.
*/
#define SIM_CONTROL_OS_FORK_PARENT 33
/**
* If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
* (shifted by 8), clears the pending magic data section. The cleared
* pending magic data section and any subsequently appended magic bytes
* will only take effect when the classifier blast programmer is run.
*/
#define SIM_CONTROL_CLEAR_MPIPE_MAGIC_BYTES 34
/**
* If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
* (shifted by 8) and a byte of data (shifted by 16), appends that byte
* to the shim's pending magic data section. The pending magic data
* section takes effect when the classifier blast programmer is run.
*/
#define SIM_CONTROL_APPEND_MPIPE_MAGIC_BYTE 35
/**
* If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
* (shifted by 8), an enable=1/disable=0 bit (shifted by 16), and a
* mask of links (shifted by 32), enable or disable the corresponding
* mPIPE links.
*/
#define SIM_CONTROL_ENABLE_MPIPE_LINK_MAGIC_BYTE 36
/*
* Syscall numbers for use with "sim_syscall()".
*/
/** Syscall number for sim_add_watchpoint(). */
#define SIM_SYSCALL_ADD_WATCHPOINT 2
/** Syscall number for sim_remove_watchpoint(). */
#define SIM_SYSCALL_REMOVE_WATCHPOINT 3
/** Syscall number for sim_query_watchpoint(). */
#define SIM_SYSCALL_QUERY_WATCHPOINT 4
/**
* Syscall number that asserts that the cache lines whose 64-bit PA
* is passed as the second argument to sim_syscall(), and over a
* range passed as the third argument, are no longer in cache.
* The simulator raises an error if this is not the case.
*/
#define SIM_SYSCALL_VALIDATE_LINES_EVICTED 5
/** Syscall number for sim_query_cpu_speed(). */
#define SIM_SYSCALL_QUERY_CPU_SPEED 6
/*
* Bit masks which can be shifted by 8, combined with
* SIM_CONTROL_SET_TRACING, and written to SPR_SIM_CONTROL.
*/
/**
* @addtogroup arch_sim
* @{
*/
/** Enable --trace-cycle when passed to simulator_set_tracing(). */
#define SIM_TRACE_CYCLES 0x01
/** Enable --trace-router when passed to simulator_set_tracing(). */
#define SIM_TRACE_ROUTER 0x02
/** Enable --trace-register-writes when passed to simulator_set_tracing(). */
#define SIM_TRACE_REGISTER_WRITES 0x04
/** Enable --trace-disasm when passed to simulator_set_tracing(). */
#define SIM_TRACE_DISASM 0x08
/** Enable --trace-stall-info when passed to simulator_set_tracing(). */
#define SIM_TRACE_STALL_INFO 0x10
/** Enable --trace-memory-controller when passed to simulator_set_tracing(). */
#define SIM_TRACE_MEMORY_CONTROLLER 0x20
/** Enable --trace-l2 when passed to simulator_set_tracing(). */
#define SIM_TRACE_L2_CACHE 0x40
/** Enable --trace-lines when passed to simulator_set_tracing(). */
#define SIM_TRACE_LINES 0x80
/** Turn off all tracing when passed to simulator_set_tracing(). */
#define SIM_TRACE_NONE 0
/** Turn on all tracing when passed to simulator_set_tracing(). */
#define SIM_TRACE_ALL (-1)
/** @} */
/** Computes the value to write to SPR_SIM_CONTROL to set tracing flags. */
#define SIM_TRACE_SPR_ARG(mask) \
(SIM_CONTROL_SET_TRACING | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
/*
* Bit masks which can be shifted by 8, combined with
* SIM_CONTROL_DUMP, and written to SPR_SIM_CONTROL.
*/
/**
* @addtogroup arch_sim
* @{
*/
/** Dump the general-purpose registers. */
#define SIM_DUMP_REGS 0x001
/** Dump the SPRs. */
#define SIM_DUMP_SPRS 0x002
/** Dump the ITLB. */
#define SIM_DUMP_ITLB 0x004
/** Dump the DTLB. */
#define SIM_DUMP_DTLB 0x008
/** Dump the L1 I-cache. */
#define SIM_DUMP_L1I 0x010
/** Dump the L1 D-cache. */
#define SIM_DUMP_L1D 0x020
/** Dump the L2 cache. */
#define SIM_DUMP_L2 0x040
/** Dump the switch registers. */
#define SIM_DUMP_SNREGS 0x080
/** Dump the switch ITLB. */
#define SIM_DUMP_SNITLB 0x100
/** Dump the switch L1 I-cache. */
#define SIM_DUMP_SNL1I 0x200
/** Dump the current backtrace. */
#define SIM_DUMP_BACKTRACE 0x400
/** Only dump valid lines in caches. */
#define SIM_DUMP_VALID_LINES 0x800
/** Dump everything that is dumpable. */
#define SIM_DUMP_ALL (-1 & ~SIM_DUMP_VALID_LINES)
/** @} */
/** Computes the value to write to SPR_SIM_CONTROL to dump machine state. */
#define SIM_DUMP_SPR_ARG(mask) \
(SIM_CONTROL_DUMP | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
/*
* Bit masks which can be shifted by 8, combined with
* SIM_CONTROL_PROFILER_CHIP_xxx, and written to SPR_SIM_CONTROL.
*/
/**
* @addtogroup arch_sim
* @{
*/
/** Use with with SIM_PROFILER_CHIP_xxx to control the memory controllers. */
#define SIM_CHIP_MEMCTL 0x001
/** Use with with SIM_PROFILER_CHIP_xxx to control the XAUI interface. */
#define SIM_CHIP_XAUI 0x002
/** Use with with SIM_PROFILER_CHIP_xxx to control the PCIe interface. */
#define SIM_CHIP_PCIE 0x004
/** Use with with SIM_PROFILER_CHIP_xxx to control the MPIPE interface. */
#define SIM_CHIP_MPIPE 0x008
/** Use with with SIM_PROFILER_CHIP_xxx to control the TRIO interface. */
#define SIM_CHIP_TRIO 0x010
/** Reference all chip devices. */
#define SIM_CHIP_ALL (-1)
/** @} */
/** Computes the value to write to SPR_SIM_CONTROL to clear chip statistics. */
#define SIM_PROFILER_CHIP_CLEAR_SPR_ARG(mask) \
(SIM_CONTROL_PROFILER_CHIP_CLEAR | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
/** Computes the value to write to SPR_SIM_CONTROL to disable chip statistics.*/
#define SIM_PROFILER_CHIP_DISABLE_SPR_ARG(mask) \
(SIM_CONTROL_PROFILER_CHIP_DISABLE | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
/** Computes the value to write to SPR_SIM_CONTROL to enable chip statistics. */
#define SIM_PROFILER_CHIP_ENABLE_SPR_ARG(mask) \
(SIM_CONTROL_PROFILER_CHIP_ENABLE | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
/* Shim bitrate controls. */
/** The number of bits used to store the shim id. */
#define SIM_CONTROL_SHAPING_SHIM_ID_BITS 3
/**
* @addtogroup arch_sim
* @{
*/
/** Change the gbe 0 bitrate. */
#define SIM_CONTROL_SHAPING_GBE_0 0x0
/** Change the gbe 1 bitrate. */
#define SIM_CONTROL_SHAPING_GBE_1 0x1
/** Change the gbe 2 bitrate. */
#define SIM_CONTROL_SHAPING_GBE_2 0x2
/** Change the gbe 3 bitrate. */
#define SIM_CONTROL_SHAPING_GBE_3 0x3
/** Change the xgbe 0 bitrate. */
#define SIM_CONTROL_SHAPING_XGBE_0 0x4
/** Change the xgbe 1 bitrate. */
#define SIM_CONTROL_SHAPING_XGBE_1 0x5
/** The type of shaping to do. */
#define SIM_CONTROL_SHAPING_TYPE_BITS 2
/** Control the multiplier. */
#define SIM_CONTROL_SHAPING_MULTIPLIER 0
/** Control the PPS. */
#define SIM_CONTROL_SHAPING_PPS 1
/** Control the BPS. */
#define SIM_CONTROL_SHAPING_BPS 2
/** The number of bits for the units for the shaping parameter. */
#define SIM_CONTROL_SHAPING_UNITS_BITS 2
/** Provide a number in single units. */
#define SIM_CONTROL_SHAPING_UNITS_SINGLE 0
/** Provide a number in kilo units. */
#define SIM_CONTROL_SHAPING_UNITS_KILO 1
/** Provide a number in mega units. */
#define SIM_CONTROL_SHAPING_UNITS_MEGA 2
/** Provide a number in giga units. */
#define SIM_CONTROL_SHAPING_UNITS_GIGA 3
/** @} */
/** How many bits are available for the rate. */
#define SIM_CONTROL_SHAPING_RATE_BITS \
(32 - (_SIM_CONTROL_OPERATOR_BITS + \
SIM_CONTROL_SHAPING_SHIM_ID_BITS + \
SIM_CONTROL_SHAPING_TYPE_BITS + \
SIM_CONTROL_SHAPING_UNITS_BITS))
/** Computes the value to write to SPR_SIM_CONTROL to change a bitrate. */
#define SIM_SHAPING_SPR_ARG(shim, type, units, rate) \
(SIM_CONTROL_SHAPING | \
((shim) | \
((type) << (SIM_CONTROL_SHAPING_SHIM_ID_BITS)) | \
((units) << (SIM_CONTROL_SHAPING_SHIM_ID_BITS + \
SIM_CONTROL_SHAPING_TYPE_BITS)) | \
((rate) << (SIM_CONTROL_SHAPING_SHIM_ID_BITS + \
SIM_CONTROL_SHAPING_TYPE_BITS + \
SIM_CONTROL_SHAPING_UNITS_BITS))) << _SIM_CONTROL_OPERATOR_BITS)
/*
* Values returned when reading SPR_SIM_CONTROL.
* ISSUE: These names should share a longer common prefix.
*/
/**
* When reading SPR_SIM_CONTROL, the mask of simulator tracing bits
* (SIM_TRACE_xxx values).
*/
#define SIM_TRACE_FLAG_MASK 0xFFFF
/** When reading SPR_SIM_CONTROL, the mask for whether profiling is enabled. */
#define SIM_PROFILER_ENABLED_MASK 0x10000
/*
* Special arguments for "SIM_CONTROL_PUTC".
*/
/**
* Flag value for forcing a PUTC string-flush, including
* coordinate/cycle prefix and newline.
*/
#define SIM_PUTC_FLUSH_STRING 0x100
/**
* Flag value for forcing a PUTC binary-data-flush, which skips the
* prefix and does not append a newline.
*/
#define SIM_PUTC_FLUSH_BINARY 0x101
#endif /* __ARCH_SIM_DEF_H__ */