|Linux driver for SE401 based USB cameras
|Copyright, 2001, Jeroen Vreeken
|The SE401 chip is the used in low-cost usb webcams.
|It is produced by Endpoints Inc. (www.endpoints.com).
|It interfaces directly to a cmos image sensor and USB. The only other major
|part in a se401 based camera is a dram chip.
|The following cameras are known to work with this driver:
|Aox se401 (non-branded) cameras
|Philips PVCV665 USB VGA webcam 'Vesta Fun'
|Kensington VideoCAM PC Camera Model 67014
|Kensington VideoCAM PC Camera Model 67015
|Kensington VideoCAM PC Camera Model 67016
|Kensington VideoCAM PC Camera Model 67017
|WHAT YOU NEED:
|- USB support
|- VIDEO4LINUX support
|More information about USB support for linux can be found at:
|When the driver is compiled as a module you can also use the 'flickerless'
|option. With it exposure is limited to values that do not interfere with the
|net frequency. Valid options for this option are 0, 50 and 60. (0=disable,
|The driver works fine with the usb-ohci and uhci host controller drivers,
|the default settings also work with usb-uhci. But sending more than one bulk
|transfer at a time with usb-uhci doesn't work yet.
|Users of usb-ohci and uhci can safely enlarge SE401_NUMSBUF in se401.h in
|order to increase the throughput (and thus framerate).
|The latest info on this driver can be found at:
|And questions to me can be send to: